p2p

package
v0.10.0-rc1 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: May 18, 2017 License: Apache-2.0 Imports: 32 Imported by: 0

README

tendermint/tendermint/p2p

CircleCI

tendermint/tendermint/p2p provides an abstraction around peer-to-peer communication.

Peer/MConnection/Channel

Each peer has one MConnection (multiplex connection) instance.

multiplex noun a system or signal involving simultaneous transmission of several messages along a single channel of communication.

Each MConnection handles message transmission on multiple abstract communication Channels. Each channel has a globally unique byte id. The byte id and the relative priorities of each Channel are configured upon initialization of the connection.

There are two methods for sending messages:

func (m MConnection) Send(chID byte, msg interface{}) bool {}
func (m MConnection) TrySend(chID byte, msg interface{}) bool {}

Send(chID, msg) is a blocking call that waits until msg is successfully queued for the channel with the given id byte chID. The message msg is serialized using the tendermint/wire submodule's WriteBinary() reflection routine.

TrySend(chID, msg) is a nonblocking call that returns false if the channel's queue is full.

Send() and TrySend() are also exposed for each Peer.

Switch/Reactor

The Switch handles peer connections and exposes an API to receive incoming messages on Reactors. Each Reactor is responsible for handling incoming messages of one or more Channels. So while sending outgoing messages is typically performed on the peer, incoming messages are received on the reactor.

// Declare a MyReactor reactor that handles messages on MyChannelID.
type MyReactor struct{}

func (reactor MyReactor) GetChannels() []*ChannelDescriptor {
    return []*ChannelDescriptor{ChannelDescriptor{ID:MyChannelID, Priority: 1}}
}

func (reactor MyReactor) Receive(chID byte, peer *Peer, msgBytes []byte) {
    r, n, err := bytes.NewBuffer(msgBytes), new(int64), new(error)
    msgString := ReadString(r, n, err)
    fmt.Println(msgString)
}

// Other Reactor methods omitted for brevity
...

switch := NewSwitch([]Reactor{MyReactor{}})

...

// Send a random message to all outbound connections
for _, peer := range switch.Peers().List() {
    if peer.IsOutbound() {
        peer.Send(MyChannelID, "Here's a random message")
    }
}
PexReactor/AddrBook

A PEXReactor reactor implementation is provided to automate peer discovery.

book := p2p.NewAddrBook(addrBookFilePath)
pexReactor := p2p.NewPEXReactor(book)
...
switch := NewSwitch([]Reactor{pexReactor, myReactor, ...})

Documentation

Overview

Uses nacl's secret_box to encrypt a net.Conn. It is (meant to be) an implementation of the STS protocol. Note we do not (yet) assume that a remote peer's pubkey is known ahead of time, and thus we are technically still vulnerable to MITM. (TODO!) See docs/sts-final.pdf for more info

Index

Constants

View Source
const (
	// FuzzModeDrop is a mode in which we randomly drop reads/writes, connections or sleep
	FuzzModeDrop = iota
	// FuzzModeDelay is a mode in which we randomly sleep
	FuzzModeDelay
)
View Source
const (
	// PexChannel is a channel for PEX messages
	PexChannel = byte(0x00)
)
View Source
const Version = "0.5.0"

Variables

View Source
var (
	ErrSwitchDuplicatePeer = errors.New("Duplicate peer")
)
View Source
var PanicOnAddPeerErr = false

Functions

func AddToIPRangeCounts

func AddToIPRangeCounts(counts map[string]int, ip string) map[string]int

TODO Test

func CheckIPRangeCounts

func CheckIPRangeCounts(counts map[string]int, limits []int) bool

TODO Test

func Connect2Switches

func Connect2Switches(switches []*Switch, i, j int)

Will connect switches i and j via net.Pipe() Blocks until a conection is established. NOTE: caller ensures i and j are within bounds

func FuzzConn

func FuzzConn(conn net.Conn) net.Conn

FuzzConn creates a new FuzzedConnection. Fuzzing starts immediately.

func FuzzConnAfter

func FuzzConnAfter(conn net.Conn, d time.Duration) net.Conn

FuzzConnAfter creates a new FuzzedConnection. Fuzzing starts when the duration elapses.

func FuzzConnAfterFromConfig

func FuzzConnAfterFromConfig(conn net.Conn, d time.Duration, config *FuzzConnConfig) net.Conn

FuzzConnAfterFromConfig creates a new FuzzedConnection from a config. Fuzzing starts when the duration elapses.

func FuzzConnFromConfig

func FuzzConnFromConfig(conn net.Conn, config *FuzzConnConfig) net.Conn

FuzzConnFromConfig creates a new FuzzedConnection from a config. Fuzzing starts immediately.

func StartSwitches

func StartSwitches(switches []*Switch) error

Types

type AddrBook

type AddrBook struct {
	cmn.BaseService
	// contains filtered or unexported fields
}

AddrBook - concurrency safe peer address manager.

func NewAddrBook

func NewAddrBook(filePath string, routabilityStrict bool) *AddrBook

NewAddrBook creates a new address book. Use Start to begin processing asynchronous address updates.

func (*AddrBook) AddAddress

func (a *AddrBook) AddAddress(addr *NetAddress, src *NetAddress)

NOTE: addr must not be nil

func (*AddrBook) AddOurAddress

func (a *AddrBook) AddOurAddress(addr *NetAddress)

func (*AddrBook) GetSelection

func (a *AddrBook) GetSelection() []*NetAddress

GetSelection randomly selects some addresses (old & new). Suitable for peer-exchange protocols.

func (*AddrBook) MarkAttempt

func (a *AddrBook) MarkAttempt(addr *NetAddress)

func (*AddrBook) MarkBad

func (a *AddrBook) MarkBad(addr *NetAddress)

MarkBad currently just ejects the address. In the future, consider blacklisting.

func (*AddrBook) MarkGood

func (a *AddrBook) MarkGood(addr *NetAddress)

func (*AddrBook) NeedMoreAddrs

func (a *AddrBook) NeedMoreAddrs() bool

func (*AddrBook) OnStart

func (a *AddrBook) OnStart() error

OnStart implements Service.

func (*AddrBook) OnStop

func (a *AddrBook) OnStop()

OnStop implements Service.

func (*AddrBook) OurAddresses

func (a *AddrBook) OurAddresses() []*NetAddress

func (*AddrBook) PickAddress

func (a *AddrBook) PickAddress(newBias int) *NetAddress

Pick an address to connect to with new/old bias.

func (*AddrBook) RemoveAddress

func (a *AddrBook) RemoveAddress(addr *NetAddress)

RemoveAddress removes the address from the book.

func (*AddrBook) Save

func (a *AddrBook) Save()

Save saves the book.

func (*AddrBook) Size

func (a *AddrBook) Size() int

func (*AddrBook) Wait

func (a *AddrBook) Wait()

type BaseReactor

type BaseReactor struct {
	cmn.BaseService // Provides Start, Stop, .Quit
	Switch          *Switch
}

func NewBaseReactor

func NewBaseReactor(name string, impl Reactor) *BaseReactor

func (*BaseReactor) AddPeer

func (_ *BaseReactor) AddPeer(peer *Peer)

func (*BaseReactor) GetChannels

func (_ *BaseReactor) GetChannels() []*ChannelDescriptor

func (*BaseReactor) Receive

func (_ *BaseReactor) Receive(chID byte, peer *Peer, msgBytes []byte)

func (*BaseReactor) RemovePeer

func (_ *BaseReactor) RemovePeer(peer *Peer, reason interface{})

func (*BaseReactor) SetSwitch

func (br *BaseReactor) SetSwitch(sw *Switch)

type Channel

type Channel struct {
	// contains filtered or unexported fields
}

TODO: lowercase. NOTE: not goroutine-safe.

type ChannelDescriptor

type ChannelDescriptor struct {
	ID                  byte
	Priority            int
	SendQueueCapacity   int
	RecvBufferCapacity  int
	RecvMessageCapacity int
}

func (*ChannelDescriptor) FillDefaults

func (chDesc *ChannelDescriptor) FillDefaults()

type ChannelStatus

type ChannelStatus struct {
	ID                byte
	SendQueueCapacity int
	SendQueueSize     int
	Priority          int
	RecentlySent      int64
}

type ConnectionStatus

type ConnectionStatus struct {
	SendMonitor flow.Status
	RecvMonitor flow.Status
	Channels    []ChannelStatus
}

type DefaultListener

type DefaultListener struct {
	cmn.BaseService
	// contains filtered or unexported fields
}

Implements Listener

func (*DefaultListener) Connections

func (l *DefaultListener) Connections() <-chan net.Conn

A channel of inbound connections. It gets closed when the listener closes.

func (*DefaultListener) ExternalAddress

func (l *DefaultListener) ExternalAddress() *NetAddress

func (*DefaultListener) InternalAddress

func (l *DefaultListener) InternalAddress() *NetAddress

func (*DefaultListener) NetListener

func (l *DefaultListener) NetListener() net.Listener

NOTE: The returned listener is already Accept()'ing. So it's not suitable to pass into http.Serve().

func (*DefaultListener) OnStart

func (l *DefaultListener) OnStart() error

func (*DefaultListener) OnStop

func (l *DefaultListener) OnStop()

func (*DefaultListener) String

func (l *DefaultListener) String() string

type FuzzConnConfig

type FuzzConnConfig struct {
	Mode         int
	MaxDelay     time.Duration
	ProbDropRW   float64
	ProbDropConn float64
	ProbSleep    float64
}

FuzzConnConfig is a FuzzedConnection configuration.

func DefaultFuzzConnConfig

func DefaultFuzzConnConfig() *FuzzConnConfig

DefaultFuzzConnConfig returns the default config.

type FuzzedConnection

type FuzzedConnection struct {
	// contains filtered or unexported fields
}

FuzzedConnection wraps any net.Conn and depending on the mode either delays reads/writes or randomly drops reads/writes/connections.

func (*FuzzedConnection) Close

func (fc *FuzzedConnection) Close() error

Close implements net.Conn.

func (*FuzzedConnection) Config

func (fc *FuzzedConnection) Config() *FuzzConnConfig

Config returns the connection's config.

func (*FuzzedConnection) LocalAddr

func (fc *FuzzedConnection) LocalAddr() net.Addr

LocalAddr implements net.Conn.

func (*FuzzedConnection) Read

func (fc *FuzzedConnection) Read(data []byte) (n int, err error)

Read implements net.Conn.

func (*FuzzedConnection) RemoteAddr

func (fc *FuzzedConnection) RemoteAddr() net.Addr

RemoteAddr implements net.Conn.

func (*FuzzedConnection) SetDeadline

func (fc *FuzzedConnection) SetDeadline(t time.Time) error

SetDeadline implements net.Conn.

func (*FuzzedConnection) SetReadDeadline

func (fc *FuzzedConnection) SetReadDeadline(t time.Time) error

SetReadDeadline implements net.Conn.

func (*FuzzedConnection) SetWriteDeadline

func (fc *FuzzedConnection) SetWriteDeadline(t time.Time) error

SetWriteDeadline implements net.Conn.

func (*FuzzedConnection) Write

func (fc *FuzzedConnection) Write(data []byte) (n int, err error)

Write implements net.Conn.

type IPeerSet

type IPeerSet interface {
	Has(key string) bool
	Get(key string) *Peer
	List() []*Peer
	Size() int
}

IPeerSet has a (immutable) subset of the methods of PeerSet.

type Listener

type Listener interface {
	Connections() <-chan net.Conn
	InternalAddress() *NetAddress
	ExternalAddress() *NetAddress
	String() string
	Stop() bool
}

func NewDefaultListener

func NewDefaultListener(protocol string, lAddr string, skipUPNP bool, logger log.Logger) Listener

skipUPNP: If true, does not try getUPNPExternalAddress()

type MConnConfig

type MConnConfig struct {
	SendRate int64 `mapstructure:"send_rate"`
	RecvRate int64 `mapstructure:"recv_rate"`
}

MConnConfig is a MConnection configuration.

func DefaultMConnConfig

func DefaultMConnConfig() *MConnConfig

DefaultMConnConfig returns the default config.

type MConnection

type MConnection struct {
	cmn.BaseService

	LocalAddress  *NetAddress
	RemoteAddress *NetAddress
	// contains filtered or unexported fields
}

Each peer has one `MConnection` (multiplex connection) instance.

__multiplex__ *noun* a system or signal involving simultaneous transmission of several messages along a single channel of communication.

Each `MConnection` handles message transmission on multiple abstract communication `Channel`s. Each channel has a globally unique byte id. The byte id and the relative priorities of each `Channel` are configured upon initialization of the connection.

There are two methods for sending messages:

func (m MConnection) Send(chID byte, msg interface{}) bool {}
func (m MConnection) TrySend(chID byte, msg interface{}) bool {}

`Send(chID, msg)` is a blocking call that waits until `msg` is successfully queued for the channel with the given id byte `chID`, or until the request times out. The message `msg` is serialized using the `tendermint/wire` submodule's `WriteBinary()` reflection routine.

`TrySend(chID, msg)` is a nonblocking call that returns false if the channel's queue is full.

Inbound message bytes are handled with an onReceive callback function.

func NewMConnection

func NewMConnection(conn net.Conn, chDescs []*ChannelDescriptor, onReceive receiveCbFunc, onError errorCbFunc) *MConnection

NewMConnection wraps net.Conn and creates multiplex connection

func NewMConnectionWithConfig

func NewMConnectionWithConfig(conn net.Conn, chDescs []*ChannelDescriptor, onReceive receiveCbFunc, onError errorCbFunc, config *MConnConfig) *MConnection

NewMConnectionWithConfig wraps net.Conn and creates multiplex connection with a config

func (*MConnection) CanSend

func (c *MConnection) CanSend(chID byte) bool

CanSend returns true if you can send more data onto the chID, false otherwise. Use only as a heuristic.

func (*MConnection) OnStart

func (c *MConnection) OnStart() error

func (*MConnection) OnStop

func (c *MConnection) OnStop()

func (*MConnection) Send

func (c *MConnection) Send(chID byte, msg interface{}) bool

Queues a message to be sent to channel.

func (*MConnection) Status

func (c *MConnection) Status() ConnectionStatus

func (*MConnection) String

func (c *MConnection) String() string

func (*MConnection) TrySend

func (c *MConnection) TrySend(chID byte, msg interface{}) bool

Queues a message to be sent to channel. Nonblocking, returns true if successful.

type NetAddress

type NetAddress struct {
	IP   net.IP
	Port uint16
	// contains filtered or unexported fields
}

NetAddress defines information about a peer on the network including its IP address, and port.

func NewNetAddress

func NewNetAddress(addr net.Addr) *NetAddress

NewNetAddress returns a new NetAddress using the provided TCP address. When testing, other net.Addr (except TCP) will result in using 0.0.0.0:0. When normal run, other net.Addr (except TCP) will panic. TODO: socks proxies?

func NewNetAddressIPPort

func NewNetAddressIPPort(ip net.IP, port uint16) *NetAddress

NewNetAddressIPPort returns a new NetAddress using the provided IP and port number.

func NewNetAddressString

func NewNetAddressString(addr string) (*NetAddress, error)

NewNetAddressString returns a new NetAddress using the provided address in the form of "IP:Port". Also resolves the host if host is not an IP.

func NewNetAddressStrings

func NewNetAddressStrings(addrs []string) ([]*NetAddress, error)

NewNetAddressStrings returns an array of NetAddress'es build using the provided strings.

func (*NetAddress) Dial

func (na *NetAddress) Dial() (net.Conn, error)

Dial calls net.Dial on the address.

func (*NetAddress) DialTimeout

func (na *NetAddress) DialTimeout(timeout time.Duration) (net.Conn, error)

DialTimeout calls net.DialTimeout on the address.

func (*NetAddress) Equals

func (na *NetAddress) Equals(other interface{}) bool

Equals reports whether na and other are the same addresses.

func (*NetAddress) Less

func (na *NetAddress) Less(other interface{}) bool

func (*NetAddress) Local

func (na *NetAddress) Local() bool

Local returns true if it is a local address.

func (*NetAddress) RFC1918

func (na *NetAddress) RFC1918() bool

func (*NetAddress) RFC3849

func (na *NetAddress) RFC3849() bool

func (*NetAddress) RFC3927

func (na *NetAddress) RFC3927() bool

func (*NetAddress) RFC3964

func (na *NetAddress) RFC3964() bool

func (*NetAddress) RFC4193

func (na *NetAddress) RFC4193() bool

func (*NetAddress) RFC4380

func (na *NetAddress) RFC4380() bool

func (*NetAddress) RFC4843

func (na *NetAddress) RFC4843() bool

func (*NetAddress) RFC4862

func (na *NetAddress) RFC4862() bool

func (*NetAddress) RFC6052

func (na *NetAddress) RFC6052() bool

func (*NetAddress) RFC6145

func (na *NetAddress) RFC6145() bool

func (*NetAddress) ReachabilityTo

func (na *NetAddress) ReachabilityTo(o *NetAddress) int

ReachabilityTo checks whenever o can be reached from na.

func (*NetAddress) Routable

func (na *NetAddress) Routable() bool

Routable returns true if the address is routable.

func (*NetAddress) String

func (na *NetAddress) String() string

String representation.

func (*NetAddress) Valid

func (na *NetAddress) Valid() bool

For IPv4 these are either a 0 or all bits set address. For IPv6 a zero address or one that matches the RFC3849 documentation address format.

type NodeInfo

type NodeInfo struct {
	PubKey     crypto.PubKeyEd25519 `json:"pub_key"`
	Moniker    string               `json:"moniker"`
	Network    string               `json:"network"`
	RemoteAddr string               `json:"remote_addr"`
	ListenAddr string               `json:"listen_addr"`
	Version    string               `json:"version"` // major.minor.revision
	Other      []string             `json:"other"`   // other application specific data
}

func (*NodeInfo) CompatibleWith

func (info *NodeInfo) CompatibleWith(other *NodeInfo) error

CONTRACT: two nodes are compatible if the major/minor versions match and network match

func (*NodeInfo) ListenHost

func (info *NodeInfo) ListenHost() string

func (*NodeInfo) ListenPort

func (info *NodeInfo) ListenPort() int

func (NodeInfo) String

func (info NodeInfo) String() string

type PEXReactor

type PEXReactor struct {
	BaseReactor
	// contains filtered or unexported fields
}

PEXReactor handles PEX (peer exchange) and ensures that an adequate number of peers are connected to the switch.

It uses `AddrBook` (address book) to store `NetAddress`es of the peers.

## Preventing abuse

For now, it just limits the number of messages from one peer to `defaultMaxMsgCountByPeer` messages per `msgCountByPeerFlushInterval` (1000 msg/hour).

NOTE [2017-01-17]:

Limiting is fine for now. Maybe down the road we want to keep track of the
quality of peer messages so if peerA keeps telling us about peers we can't
connect to then maybe we should care less about peerA. But I don't think
that kind of complexity is priority right now.

func NewPEXReactor

func NewPEXReactor(b *AddrBook) *PEXReactor

NewPEXReactor creates new PEX reactor.

func (*PEXReactor) AddPeer

func (r *PEXReactor) AddPeer(p *Peer)

AddPeer implements Reactor by adding peer to the address book (if inbound) or by requesting more addresses (if outbound).

func (*PEXReactor) GetChannels

func (r *PEXReactor) GetChannels() []*ChannelDescriptor

GetChannels implements Reactor

func (*PEXReactor) IncrementMsgCountForPeer

func (r *PEXReactor) IncrementMsgCountForPeer(addr string)

Increment or initialize the msg count for the peer in the CMap

func (*PEXReactor) OnStart

func (r *PEXReactor) OnStart() error

OnStart implements BaseService

func (*PEXReactor) OnStop

func (r *PEXReactor) OnStop()

OnStop implements BaseService

func (*PEXReactor) ReachedMaxMsgCountForPeer

func (r *PEXReactor) ReachedMaxMsgCountForPeer(addr string) bool

ReachedMaxMsgCountForPeer returns true if we received too many messages from peer with address `addr`. NOTE: assumes the value in the CMap is non-nil

func (*PEXReactor) Receive

func (r *PEXReactor) Receive(chID byte, src *Peer, msgBytes []byte)

Receive implements Reactor by handling incoming PEX messages.

func (*PEXReactor) RemovePeer

func (r *PEXReactor) RemovePeer(p *Peer, reason interface{})

RemovePeer implements Reactor.

func (*PEXReactor) RequestPEX

func (r *PEXReactor) RequestPEX(p *Peer)

RequestPEX asks peer for more addresses.

func (*PEXReactor) SendAddrs

func (r *PEXReactor) SendAddrs(p *Peer, addrs []*NetAddress)

SendAddrs sends addrs to the peer.

func (*PEXReactor) SetEnsurePeersPeriod

func (r *PEXReactor) SetEnsurePeersPeriod(d time.Duration)

SetEnsurePeersPeriod sets period to ensure peers connected.

func (*PEXReactor) SetMaxMsgCountByPeer

func (r *PEXReactor) SetMaxMsgCountByPeer(v uint16)

SetMaxMsgCountByPeer sets maximum messages one peer can send to us during 'msgCountByPeerFlushInterval'.

type Peer

type Peer struct {
	cmn.BaseService

	*NodeInfo
	Key  string
	Data *cmn.CMap // User data.
	// contains filtered or unexported fields
}

Peer could be marked as persistent, in which case you can use Redial function to reconnect. Note that inbound peers can't be made persistent. They should be made persistent on the other end.

Before using a peer, you will need to perform a handshake on connection.

func (*Peer) Addr

func (p *Peer) Addr() net.Addr

Addr returns peer's remote network address.

func (*Peer) CanSend

func (p *Peer) CanSend(chID byte) bool

CanSend returns true if the send queue is not full, false otherwise.

func (*Peer) CloseConn

func (p *Peer) CloseConn()

CloseConn should be used when the peer was created, but never started.

func (*Peer) Connection

func (p *Peer) Connection() *MConnection

Connection returns underlying MConnection.

func (*Peer) Equals

func (p *Peer) Equals(other *Peer) bool

Equals reports whenever 2 peers are actually represent the same node.

func (*Peer) Get

func (p *Peer) Get(key string) interface{}

Get the data for a given key.

func (*Peer) HandshakeTimeout

func (p *Peer) HandshakeTimeout(ourNodeInfo *NodeInfo, timeout time.Duration) error

HandshakeTimeout performs a handshake between a given node and the peer. NOTE: blocking

func (*Peer) IsOutbound

func (p *Peer) IsOutbound() bool

IsOutbound returns true if the connection is outbound, false otherwise.

func (*Peer) IsPersistent

func (p *Peer) IsPersistent() bool

IsPersistent returns true if the peer is persitent, false otherwise.

func (*Peer) OnStart

func (p *Peer) OnStart() error

OnStart implements BaseService.

func (*Peer) OnStop

func (p *Peer) OnStop()

OnStop implements BaseService.

func (*Peer) PubKey

func (p *Peer) PubKey() crypto.PubKeyEd25519

PubKey returns peer's public key.

func (*Peer) Send

func (p *Peer) Send(chID byte, msg interface{}) bool

Send msg to the channel identified by chID byte. Returns false if the send queue is full after timeout, specified by MConnection.

func (*Peer) String

func (p *Peer) String() string

String representation.

func (*Peer) TrySend

func (p *Peer) TrySend(chID byte, msg interface{}) bool

TrySend msg to the channel identified by chID byte. Immediately returns false if the send queue is full.

func (*Peer) WriteTo

func (p *Peer) WriteTo(w io.Writer) (n int64, err error)

WriteTo writes the peer's public key to w.

type PeerConfig

type PeerConfig struct {
	AuthEnc bool `mapstructure:"auth_enc"` // authenticated encryption

	// times are in seconds
	HandshakeTimeout time.Duration `mapstructure:"handshake_timeout"`
	DialTimeout      time.Duration `mapstructure:"dial_timeout"`

	MConfig *MConnConfig `mapstructure:"connection"`

	Fuzz       bool            `mapstructure:"fuzz"` // fuzz connection (for testing)
	FuzzConfig *FuzzConnConfig `mapstructure:"fuzz_config"`
}

PeerConfig is a Peer configuration.

func DefaultPeerConfig

func DefaultPeerConfig() *PeerConfig

DefaultPeerConfig returns the default config.

type PeerSet

type PeerSet struct {
	// contains filtered or unexported fields
}

PeerSet is a special structure for keeping a table of peers. Iteration over the peers is super fast and thread-safe.

func NewPeerSet

func NewPeerSet() *PeerSet

func (*PeerSet) Add

func (ps *PeerSet) Add(peer *Peer) error

Returns false if peer with key (PubKeyEd25519) is already set

func (*PeerSet) Get

func (ps *PeerSet) Get(peerKey string) *Peer

func (*PeerSet) Has

func (ps *PeerSet) Has(peerKey string) bool

func (*PeerSet) List

func (ps *PeerSet) List() []*Peer

threadsafe list of peers.

func (*PeerSet) Remove

func (ps *PeerSet) Remove(peer *Peer)

func (*PeerSet) Size

func (ps *PeerSet) Size() int

type PexMessage

type PexMessage interface{}

PexMessage is a primary type for PEX messages. Underneath, it could contain either pexRequestMessage, or pexAddrsMessage messages.

func DecodeMessage

func DecodeMessage(bz []byte) (msgType byte, msg PexMessage, err error)

DecodeMessage implements interface registered above.

type Reactor

type Reactor interface {
	cmn.Service // Start, Stop

	SetSwitch(*Switch)
	GetChannels() []*ChannelDescriptor
	AddPeer(peer *Peer)
	RemovePeer(peer *Peer, reason interface{})
	Receive(chID byte, peer *Peer, msgBytes []byte)
}

type SecretConnection

type SecretConnection struct {
	// contains filtered or unexported fields
}

Implements net.Conn

func MakeSecretConnection

func MakeSecretConnection(conn io.ReadWriteCloser, locPrivKey crypto.PrivKeyEd25519) (*SecretConnection, error)

Performs handshake and returns a new authenticated SecretConnection. Returns nil if error in handshake. Caller should call conn.Close() See docs/sts-final.pdf for more information.

func (*SecretConnection) Close

func (sc *SecretConnection) Close() error

Implements net.Conn

func (*SecretConnection) LocalAddr

func (sc *SecretConnection) LocalAddr() net.Addr

func (*SecretConnection) Read

func (sc *SecretConnection) Read(data []byte) (n int, err error)

CONTRACT: data smaller than dataMaxSize is read atomically.

func (*SecretConnection) RemoteAddr

func (sc *SecretConnection) RemoteAddr() net.Addr

func (*SecretConnection) RemotePubKey

func (sc *SecretConnection) RemotePubKey() crypto.PubKeyEd25519

Returns authenticated remote pubkey

func (*SecretConnection) SetDeadline

func (sc *SecretConnection) SetDeadline(t time.Time) error

func (*SecretConnection) SetReadDeadline

func (sc *SecretConnection) SetReadDeadline(t time.Time) error

func (*SecretConnection) SetWriteDeadline

func (sc *SecretConnection) SetWriteDeadline(t time.Time) error

func (*SecretConnection) Write

func (sc *SecretConnection) Write(data []byte) (n int, err error)

Writes encrypted frames of `sealedFrameSize` CONTRACT: data smaller than dataMaxSize is read atomically.

type Switch

type Switch struct {
	cmn.BaseService
	// contains filtered or unexported fields
}

The `Switch` handles peer connections and exposes an API to receive incoming messages on `Reactors`. Each `Reactor` is responsible for handling incoming messages of one or more `Channels`. So while sending outgoing messages is typically performed on the peer, incoming messages are received on the reactor.

func MakeConnectedSwitches

func MakeConnectedSwitches(cfg *cfg.P2PConfig, n int, initSwitch func(int, *Switch) *Switch, connect func([]*Switch, int, int)) []*Switch

Returns n switches, connected according to the connect func. If connect==Connect2Switches, the switches will be fully connected. initSwitch defines how the ith switch should be initialized (ie. with what reactors). NOTE: panics if any switch fails to start.

func NewSwitch

func NewSwitch(config *cfg.P2PConfig) *Switch

func (*Switch) AddListener

func (sw *Switch) AddListener(l Listener)

Not goroutine safe.

func (*Switch) AddPeer

func (sw *Switch) AddPeer(peer *Peer) error

NOTE: This performs a blocking handshake before the peer is added. CONTRACT: If error is returned, peer is nil, and conn is immediately closed.

func (*Switch) AddReactor

func (sw *Switch) AddReactor(name string, reactor Reactor) Reactor

Not goroutine safe.

func (*Switch) Broadcast

func (sw *Switch) Broadcast(chID byte, msg interface{}) chan bool

Broadcast runs a go routine for each attempted send, which will block trying to send for defaultSendTimeoutSeconds. Returns a channel which receives success values for each attempted send (false if times out) NOTE: Broadcast uses goroutines, so order of broadcast may not be preserved.

func (*Switch) DialPeerWithAddress

func (sw *Switch) DialPeerWithAddress(addr *NetAddress, persistent bool) (*Peer, error)

func (*Switch) DialSeeds

func (sw *Switch) DialSeeds(addrBook *AddrBook, seeds []string) error

Dial a list of seeds asynchronously in random order

func (*Switch) FilterConnByAddr

func (sw *Switch) FilterConnByAddr(addr net.Addr) error

func (*Switch) FilterConnByPubKey

func (sw *Switch) FilterConnByPubKey(pubkey crypto.PubKeyEd25519) error

func (*Switch) IsDialing

func (sw *Switch) IsDialing(addr *NetAddress) bool

func (*Switch) IsListening

func (sw *Switch) IsListening() bool

Not goroutine safe.

func (*Switch) Listeners

func (sw *Switch) Listeners() []Listener

Not goroutine safe.

func (*Switch) NodeInfo

func (sw *Switch) NodeInfo() *NodeInfo

Not goroutine safe.

func (*Switch) NumPeers

func (sw *Switch) NumPeers() (outbound, inbound, dialing int)

Returns the count of outbound/inbound and outbound-dialing peers.

func (*Switch) OnStart

func (sw *Switch) OnStart() error

Switch.Start() starts all the reactors, peers, and listeners.

func (*Switch) OnStop

func (sw *Switch) OnStop()

func (*Switch) Peers

func (sw *Switch) Peers() IPeerSet

func (*Switch) Reactor

func (sw *Switch) Reactor(name string) Reactor

Not goroutine safe.

func (*Switch) Reactors

func (sw *Switch) Reactors() map[string]Reactor

Not goroutine safe.

func (*Switch) SetAddrFilter

func (sw *Switch) SetAddrFilter(f func(net.Addr) error)

func (*Switch) SetNodeInfo

func (sw *Switch) SetNodeInfo(nodeInfo *NodeInfo)

Not goroutine safe.

func (*Switch) SetNodePrivKey

func (sw *Switch) SetNodePrivKey(nodePrivKey crypto.PrivKeyEd25519)

Not goroutine safe. NOTE: Overwrites sw.nodeInfo.PubKey

func (*Switch) SetPubKeyFilter

func (sw *Switch) SetPubKeyFilter(f func(crypto.PubKeyEd25519) error)

func (*Switch) StopPeerForError

func (sw *Switch) StopPeerForError(peer *Peer, reason interface{})

Disconnect from a peer due to external error, retry if it is a persistent peer. TODO: make record depending on reason.

func (*Switch) StopPeerGracefully

func (sw *Switch) StopPeerGracefully(peer *Peer)

Disconnect from a peer gracefully. TODO: handle graceful disconnects.

type SwitchEventDonePeer

type SwitchEventDonePeer struct {
	Peer  *Peer
	Error interface{}
}

type SwitchEventNewPeer

type SwitchEventNewPeer struct {
	Peer *Peer
}

Directories

Path Synopsis
Taken from taipei-torrent Just enough UPnP to be able to forward ports
Taken from taipei-torrent Just enough UPnP to be able to forward ports

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL