GL

package
v0.9.17 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: May 8, 2015 License: LGPL-3.0, LGPL-2.1-or-later Imports: 5 Imported by: 0

Documentation

Index

Constants

View Source
const (
	FALSE = 0
	TRUE  = 1
	NONE  = 0

	BYTE           = 0x1400
	UNSIGNED_BYTE  = 0x1401
	SHORT          = 0x1402
	UNSIGNED_SHORT = 0x1403
	INT            = 0x1404
	UNSIGNED_INT   = 0x1405
	FLOAT          = 0x1406
	FIXED          = 0x140C

	COLOR_BUFFER_BIT   = 0x00004000
	DEPTH_BUFFER_BIT   = 0x00000100
	STENCIL_BUFFER_BIT = 0x00000400

	ALWAYS   = 0x0207
	EQUAL    = 0x0202
	GEQUAL   = 0x0206
	GREATER  = 0x0204
	LEQUAL   = 0x0203
	LESS     = 0x0201
	NEVER    = 0x0200
	NOTEQUAL = 0x0205

	DST_ALPHA           = 0x0304
	ONE                 = 1
	ONE_MINUS_DST_ALPHA = 0x0305
	ONE_MINUS_SRC_ALPHA = 0x0303
	ONE_MINUS_SRC_COLOR = 0x0301
	SRC_ALPHA           = 0x0302
	SRC_COLOR           = 0x0300
	ZERO                = 0

	DST_COLOR           = 0x0306
	ONE_MINUS_DST_COLOR = 0x0307
	SRC_ALPHA_SATURATE  = 0x0308

	BACK           = 0x0405
	FRONT          = 0x0404
	FRONT_AND_BACK = 0x0408

	BLEND               = 0x0BE2
	CULL_FACE           = 0x0B44
	DEPTH_TEST          = 0x0B71
	DITHER              = 0x0BD0
	POLYGON_OFFSET_FILL = 0x8037
	SCISSOR_TEST        = 0x0C11
	STENCIL_TEST        = 0x0B90
	TEXTURE_2D          = 0x0DE1

	INVALID_ENUM                  = 0x0500
	INVALID_FRAMEBUFFER_OPERATION = 0x0506
	INVALID_OPERATION             = 0x0502
	INVALID_VALUE                 = 0x0501
	NO_ERROR                      = 0
	OUT_OF_MEMORY                 = 0x0505

	LINEAR = 0x2601

	CCW = 0x0901
	CW  = 0x0900

	ALIASED_LINE_WIDTH_RANGE = 0x846E
	ALIASED_POINT_SIZE_RANGE = 0x846D
	ALPHA_BITS               = 0x0D55
	BLUE_BITS                = 0x0D54
	COLOR_CLEAR_VALUE        = 0x0C22
	COLOR_WRITEMASK          = 0x0C23
	CULL_FACE_MODE           = 0x0B45
	DEPTH_BITS               = 0x0D56
	DEPTH_CLEAR_VALUE        = 0x0B73
	DEPTH_FUNC               = 0x0B74
	DEPTH_RANGE              = 0x0B70
	DEPTH_WRITEMASK          = 0x0B72
	FRONT_FACE               = 0x0B46
	GREEN_BITS               = 0x0D53
	LINE_WIDTH               = 0x0B21
	MAX_TEXTURE_SIZE         = 0x0D33
	MAX_VIEWPORT_DIMS        = 0x0D3A
	PACK_ALIGNMENT           = 0x0D05
	POLYGON_OFFSET_FACTOR    = 0x8038
	POLYGON_OFFSET_UNITS     = 0x2A00
	RED_BITS                 = 0x0D52
	SCISSOR_BOX              = 0x0C10
	STENCIL_BITS             = 0x0D57
	STENCIL_CLEAR_VALUE      = 0x0B91
	STENCIL_FAIL             = 0x0B94
	STENCIL_FUNC             = 0x0B92
	STENCIL_PASS_DEPTH_FAIL  = 0x0B95
	STENCIL_PASS_DEPTH_PASS  = 0x0B96
	STENCIL_REF              = 0x0B97
	STENCIL_VALUE_MASK       = 0x0B93
	STENCIL_WRITEMASK        = 0x0B98
	SUBPIXEL_BITS            = 0x0D50
	TEXTURE_BINDING_2D       = 0x8069
	UNPACK_ALIGNMENT         = 0x0CF5
	VIEWPORT                 = 0x0BA2

	TEXTURE_MAG_FILTER = 0x2800
	TEXTURE_MIN_FILTER = 0x2801
	TEXTURE_WRAP_S     = 0x2802
	TEXTURE_WRAP_T     = 0x2803

	DONT_CARE = 0x1100
	FASTEST   = 0x1101
	NICEST    = 0x1102

	GENERATE_MIPMAP_HINT = 0x8192

	REPLACE = 0x1E01

	INVERT = 0x150A

	TEXTURE = 0x1702

	ALPHA           = 0x1906
	DEPTH_COMPONENT = 0x1902
	LUMINANCE       = 0x1909
	LUMINANCE_ALPHA = 0x190A
	RGB             = 0x1907
	RGBA            = 0x1908

	RGB5_A1 = 0x8057
	RGBA4   = 0x8056

	UNSIGNED_SHORT_4_4_4_4 = 0x8033
	UNSIGNED_SHORT_5_5_5_1 = 0x8034

	LINES          = 0x0001
	LINE_LOOP      = 0x0002
	LINE_STRIP     = 0x0003
	POINTS         = 0x0000
	TRIANGLES      = 0x0004
	TRIANGLE_FAN   = 0x0006
	TRIANGLE_STRIP = 0x0005

	DECR = 0x1E03
	INCR = 0x1E02
	KEEP = 0x1E00

	EXTENSIONS = 0x1F03
	RENDERER   = 0x1F01
	VENDOR     = 0x1F00
	VERSION    = 0x1F02

	NEAREST = 0x2600

	LINEAR_MIPMAP_LINEAR   = 0x2703
	LINEAR_MIPMAP_NEAREST  = 0x2701
	NEAREST_MIPMAP_LINEAR  = 0x2702
	NEAREST_MIPMAP_NEAREST = 0x2700

	CLAMP_TO_EDGE = 0x812F
	REPEAT        = 0x2901

	CONSTANT_COLOR                               = 0x8001
	ONE_MINUS_CONSTANT_COLOR                     = 0x8002
	CONSTANT_ALPHA                               = 0x8003
	ONE_MINUS_CONSTANT_ALPHA                     = 0x8004
	BLEND_COLOR                                  = 0x8005
	FUNC_ADD                                     = 0x8006
	BLEND_EQUATION                               = 0x8009
	BLEND_EQUATION_RGB                           = 0x8009
	FUNC_SUBTRACT                                = 0x800A
	FUNC_REVERSE_SUBTRACT                        = 0x800B
	SAMPLE_ALPHA_TO_COVERAGE                     = 0x809E
	SAMPLE_COVERAGE                              = 0x80A0
	SAMPLE_BUFFERS                               = 0x80A8
	SAMPLES                                      = 0x80A9
	SAMPLE_COVERAGE_VALUE                        = 0x80AA
	SAMPLE_COVERAGE_INVERT                       = 0x80AB
	BLEND_DST_RGB                                = 0x80C8
	BLEND_SRC_RGB                                = 0x80C9
	BLEND_DST_ALPHA                              = 0x80CA
	BLEND_SRC_ALPHA                              = 0x80CB
	DEPTH_COMPONENT16                            = 0x81A5
	UNSIGNED_SHORT_5_6_5                         = 0x8363
	MIRRORED_REPEAT                              = 0x8370
	TEXTURE0                                     = 0x84C0
	TEXTURE1                                     = 0x84C1
	TEXTURE2                                     = 0x84C2
	TEXTURE3                                     = 0x84C3
	TEXTURE4                                     = 0x84C4
	TEXTURE5                                     = 0x84C5
	TEXTURE6                                     = 0x84C6
	TEXTURE7                                     = 0x84C7
	TEXTURE8                                     = 0x84C8
	TEXTURE9                                     = 0x84C9
	TEXTURE10                                    = 0x84CA
	TEXTURE11                                    = 0x84CB
	TEXTURE12                                    = 0x84CC
	TEXTURE13                                    = 0x84CD
	TEXTURE14                                    = 0x84CE
	TEXTURE15                                    = 0x84CF
	TEXTURE16                                    = 0x84D0
	TEXTURE17                                    = 0x84D1
	TEXTURE18                                    = 0x84D2
	TEXTURE19                                    = 0x84D3
	TEXTURE20                                    = 0x84D4
	TEXTURE21                                    = 0x84D5
	TEXTURE22                                    = 0x84D6
	TEXTURE23                                    = 0x84D7
	TEXTURE24                                    = 0x84D8
	TEXTURE25                                    = 0x84D9
	TEXTURE26                                    = 0x84DA
	TEXTURE27                                    = 0x84DB
	TEXTURE28                                    = 0x84DC
	TEXTURE29                                    = 0x84DD
	TEXTURE30                                    = 0x84DE
	TEXTURE31                                    = 0x84DF
	ACTIVE_TEXTURE                               = 0x84E0
	MAX_RENDERBUFFER_SIZE                        = 0x84E8
	INCR_WRAP                                    = 0x8507
	DECR_WRAP                                    = 0x8508
	TEXTURE_CUBE_MAP                             = 0x8513
	TEXTURE_BINDING_CUBE_MAP                     = 0x8514
	TEXTURE_CUBE_MAP_POSITIVE_X                  = 0x8515
	TEXTURE_CUBE_MAP_NEGATIVE_X                  = 0x8516
	TEXTURE_CUBE_MAP_POSITIVE_Y                  = 0x8517
	TEXTURE_CUBE_MAP_NEGATIVE_Y                  = 0x8518
	TEXTURE_CUBE_MAP_POSITIVE_Z                  = 0x8519
	TEXTURE_CUBE_MAP_NEGATIVE_Z                  = 0x851A
	MAX_CUBE_MAP_TEXTURE_SIZE                    = 0x851C
	VERTEX_ATTRIB_ARRAY_ENABLED                  = 0x8622
	VERTEX_ATTRIB_ARRAY_SIZE                     = 0x8623
	VERTEX_ATTRIB_ARRAY_STRIDE                   = 0x8624
	VERTEX_ATTRIB_ARRAY_TYPE                     = 0x8625
	CURRENT_VERTEX_ATTRIB                        = 0x8626
	VERTEX_ATTRIB_ARRAY_POINTER                  = 0x8645
	NUM_COMPRESSED_TEXTURE_FORMATS               = 0x86A2
	COMPRESSED_TEXTURE_FORMATS                   = 0x86A3
	BUFFER_SIZE                                  = 0x8764
	BUFFER_USAGE                                 = 0x8765
	STENCIL_BACK_FUNC                            = 0x8800
	STENCIL_BACK_FAIL                            = 0x8801
	STENCIL_BACK_PASS_DEPTH_FAIL                 = 0x8802
	STENCIL_BACK_PASS_DEPTH_PASS                 = 0x8803
	BLEND_EQUATION_ALPHA                         = 0x883D
	MAX_VERTEX_ATTRIBS                           = 0x8869
	VERTEX_ATTRIB_ARRAY_NORMALIZED               = 0x886A
	MAX_TEXTURE_IMAGE_UNITS                      = 0x8872
	ARRAY_BUFFER                                 = 0x8892
	ELEMENT_ARRAY_BUFFER                         = 0x8893
	ARRAY_BUFFER_BINDING                         = 0x8894
	ELEMENT_ARRAY_BUFFER_BINDING                 = 0x8895
	VERTEX_ATTRIB_ARRAY_BUFFER_BINDING           = 0x889F
	STREAM_DRAW                                  = 0x88E0
	STATIC_DRAW                                  = 0x88E4
	DYNAMIC_DRAW                                 = 0x88E8
	FRAGMENT_SHADER                              = 0x8B30
	VERTEX_SHADER                                = 0x8B31
	MAX_VERTEX_TEXTURE_IMAGE_UNITS               = 0x8B4C
	MAX_COMBINED_TEXTURE_IMAGE_UNITS             = 0x8B4D
	SHADER_TYPE                                  = 0x8B4F
	FLOAT_VEC2                                   = 0x8B50
	FLOAT_VEC3                                   = 0x8B51
	FLOAT_VEC4                                   = 0x8B52
	INT_VEC2                                     = 0x8B53
	INT_VEC3                                     = 0x8B54
	INT_VEC4                                     = 0x8B55
	BOOL                                         = 0x8B56
	BOOL_VEC2                                    = 0x8B57
	BOOL_VEC3                                    = 0x8B58
	BOOL_VEC4                                    = 0x8B59
	FLOAT_MAT2                                   = 0x8B5A
	FLOAT_MAT3                                   = 0x8B5B
	FLOAT_MAT4                                   = 0x8B5C
	SAMPLER_2D                                   = 0x8B5E
	SAMPLER_CUBE                                 = 0x8B60
	DELETE_STATUS                                = 0x8B80
	COMPILE_STATUS                               = 0x8B81
	LINK_STATUS                                  = 0x8B82
	VALIDATE_STATUS                              = 0x8B83
	INFO_LOG_LENGTH                              = 0x8B84
	ATTACHED_SHADERS                             = 0x8B85
	ACTIVE_UNIFORMS                              = 0x8B86
	ACTIVE_UNIFORM_MAX_LENGTH                    = 0x8B87
	SHADER_SOURCE_LENGTH                         = 0x8B88
	ACTIVE_ATTRIBUTES                            = 0x8B89
	ACTIVE_ATTRIBUTE_MAX_LENGTH                  = 0x8B8A
	SHADING_LANGUAGE_VERSION                     = 0x8B8C
	CURRENT_PROGRAM                              = 0x8B8D
	IMPLEMENTATION_COLOR_READ_TYPE               = 0x8B9A
	IMPLEMENTATION_COLOR_READ_FORMAT             = 0x8B9B
	STENCIL_BACK_REF                             = 0x8CA3
	STENCIL_BACK_VALUE_MASK                      = 0x8CA4
	STENCIL_BACK_WRITEMASK                       = 0x8CA5
	FRAMEBUFFER_BINDING                          = 0x8CA6
	RENDERBUFFER_BINDING                         = 0x8CA7
	FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE           = 0x8CD0
	FRAMEBUFFER_ATTACHMENT_OBJECT_NAME           = 0x8CD1
	FRAMEBUFFER_ATTACHMENT_TEXTURE_LEVEL         = 0x8CD2
	FRAMEBUFFER_ATTACHMENT_TEXTURE_CUBE_MAP_FACE = 0x8CD3
	FRAMEBUFFER_COMPLETE                         = 0x8CD5
	FRAMEBUFFER_INCOMPLETE_ATTACHMENT            = 0x8CD6
	FRAMEBUFFER_INCOMPLETE_MISSING_ATTACHMENT    = 0x8CD7
	FRAMEBUFFER_INCOMPLETE_DIMENSIONS            = 0x8CD9
	FRAMEBUFFER_UNSUPPORTED                      = 0x8CDD
	COLOR_ATTACHMENT0                            = 0x8CE0
	DEPTH_ATTACHMENT                             = 0x8D00
	STENCIL_ATTACHMENT                           = 0x8D20
	FRAMEBUFFER                                  = 0x8D40
	RENDERBUFFER                                 = 0x8D41
	RENDERBUFFER_WIDTH                           = 0x8D42
	RENDERBUFFER_HEIGHT                          = 0x8D43
	RENDERBUFFER_INTERNAL_FORMAT                 = 0x8D44
	STENCIL_INDEX8                               = 0x8D48
	RENDERBUFFER_RED_SIZE                        = 0x8D50
	RENDERBUFFER_GREEN_SIZE                      = 0x8D51
	RENDERBUFFER_BLUE_SIZE                       = 0x8D52
	RENDERBUFFER_ALPHA_SIZE                      = 0x8D53
	RENDERBUFFER_DEPTH_SIZE                      = 0x8D54
	RENDERBUFFER_STENCIL_SIZE                    = 0x8D55
	RGB565                                       = 0x8D62
	LOW_FLOAT                                    = 0x8DF0
	MEDIUM_FLOAT                                 = 0x8DF1
	HIGH_FLOAT                                   = 0x8DF2
	LOW_INT                                      = 0x8DF3
	MEDIUM_INT                                   = 0x8DF4
	HIGH_INT                                     = 0x8DF5
	SHADER_BINARY_FORMATS                        = 0x8DF8
	NUM_SHADER_BINARY_FORMATS                    = 0x8DF9
	SHADER_COMPILER                              = 0x8DFA
	MAX_VERTEX_UNIFORM_VECTORS                   = 0x8DFB
	MAX_VARYING_VECTORS                          = 0x8DFC
	MAX_FRAGMENT_UNIFORM_VECTORS                 = 0x8DFD
)

Variables

This section is empty.

Functions

This section is empty.

Types

type GL

type GL struct {
	// contains filtered or unexported fields
}

GL implements the OpenGL version ES2 API. Values of this type must be created via the API function, and it must not be used after the associated OpenGL context becomes invalid.

func API

func API(context glbase.Contexter) *GL

API returns a value that offers methods matching the OpenGL version ES2 API.

The returned API must not be used after the provided OpenGL context becomes invalid.

func (*GL) AttachShader

func (gl *GL) AttachShader(program glbase.Program, shader glbase.Shader)

AttachShader attaches a shader object to a program object.

In order to create an executable, there must be a way to specify the list of things that will be linked together. Program objects provide this mechanism. Shaders that are to be linked together in a program object must first be attached to that program object. This indicates that shader will be included in link operations that will be performed on program.

All operations that can be performed on a shader object are valid whether or not the shader object is attached to a program object. It is permissible to attach a shader object to a program object before source code has been loaded into the shader object or before the shader object has been compiled. It is permissible to attach multiple shader objects of the same type because each may contain a portion of the complete shader. It is also permissible to attach a shader object to more than one program object. If a shader object is deleted while it is attached to a program object, it will be flagged for deletion, and deletion will not occur until DetachShader is called to detach it from all program objects to which it is attached.

Error GL.INVALID_VALUE is generated if either program or shader is not a value generated by OpenGL. GL.INVALID_OPERATION is generated if program is not a program object. GL.INVALID_OPERATION is generated if shader is not a shader object. GL.INVALID_OPERATION is generated if shader is already attached to program. GL.INVALID_OPERATION is generated if AttachShader is executed between the execution of Begin and the corresponding execution of End.

AttachShader is available in GL version 2.0 or greater.

func (*GL) BindAttribLocation

func (gl *GL) BindAttribLocation(program glbase.Program, index glbase.Attrib, name string)

BindAttribLocation associates a user-defined attribute variable in the program object specified by program with a generic vertex attribute index. The name parameter specifies the name of the vertex shader attribute variable to which index is to be bound. When program is made part of the current state, values provided via the generic vertex attribute index will modify the value of the user-defined attribute variable specified by name.

If name refers to a matrix attribute variable, index refers to the first column of the matrix. Other matrix columns are then automatically bound to locations index+1 for a matrix of type mat2; index+1 and index+2 for a matrix of type mat3; and index+1, index+2, and index+3 for a matrix of type mat4.

This command makes it possible for vertex shaders to use descriptive names for attribute variables rather than generic variables that are numbered from 0 to GL.MAX_VERTEX_ATTRIBS-1. The values sent to each generic attribute index are part of current state, just like standard vertex attributes such as color, normal, and vertex position. If a different program object is made current by calling UseProgram, the generic vertex attributes are tracked in such a way that the same values will be observed by attributes in the new program object that are also bound to index.

Attribute variable name-to-generic attribute index bindings for a program object can be explicitly assigned at any time by calling BindAttribLocation. Attribute bindings do not go into effect until LinkProgram is called. After a program object has been linked successfully, the index values for generic attributes remain fixed (and their values can be queried) until the next link command occurs.

Applications are not allowed to bind any of the standard OpenGL vertex attributes using this command, as they are bound automatically when needed. Any attribute binding that occurs after the program object has been linked will not take effect until the next time the program object is linked.

If name was bound previously, that information is lost. Thus you cannot bind one user-defined attribute variable to multiple indices, but you can bind multiple user-defined attribute variables to the same index.

Applications are allowed to bind more than one user-defined attribute variable to the same generic vertex attribute index. This is called aliasing, and it is allowed only if just one of the aliased attributes is active in the executable program, or if no path through the shader consumes more than one attribute of a set of attributes aliased to the same location. The compiler and linker are allowed to assume that no aliasing is done and are free to employ optimizations that work only in the absence of aliasing. OpenGL implementations are not required to do error checking to detect aliasing. Because there is no way to bind standard attributes, it is not possible to alias generic attributes with conventional ones (except for generic attribute 0).

BindAttribLocation can be called before any vertex shader objects are bound to the specified program object. It is also permissible to bind a generic attribute index to an attribute variable name that is never used in a vertex shader.

Active attributes that are not explicitly bound will be bound by the linker when LinkProgram is called. The locations assigned can be queried by calling GetAttribLocation.

Error GL.INVALID_VALUE is generated if index is greater than or equal to GL.MAX_VERTEX_ATTRIBS. GL.INVALID_OPERATION is generated if name starts with the reserved prefix "gl_". GL.INVALID_VALUE is generated if program is not a value generated by OpenGL. GL.INVALID_OPERATION is generated if program is not a program object. GL.INVALID_OPERATION is generated if BindAttribLocation is executed between the execution of Begin and the corresponding execution of End.

BindAttribLocation is available in GL version 2.0 or greater.

func (*GL) BindBuffer

func (gl *GL) BindBuffer(target glbase.Enum, buffer glbase.Buffer)

BindBuffer creates or puts in use a named buffer object. Calling BindBuffer with target set to GL.ARRAY_BUFFER, GL.ELEMENT_ARRAY_BUFFER, GL.PIXEL_PACK_BUFFER or GL.PIXEL_UNPACK_BUFFER and buffer set to the name of the new buffer object binds the buffer object name to the target. When a buffer object is bound to a target, the previous binding for that target is automatically broken.

Buffer object names are unsigned integers. The value zero is reserved, but there is no default buffer object for each buffer object target. Instead, buffer set to zero effectively unbinds any buffer object previously bound, and restores client memory usage for that buffer object target. Buffer object names and the corresponding buffer object contents are local to the shared display-list space (see XCreateContext) of the current GL rendering context; two rendering contexts share buffer object names only if they also share display lists.

GenBuffers may be called to generate a set of new buffer object names.

The state of a buffer object immediately after it is first bound is an unmapped zero-sized memory buffer with GL.READ_WRITE access and GL.STATIC_DRAW usage.

While a non-zero buffer object name is bound, GL operations on the target to which it is bound affect the bound buffer object, and queries of the target to which it is bound return state from the bound buffer object. While buffer object name zero is bound, as in the initial state, attempts to modify or query state on the target to which it is bound generates an GL.INVALID_OPERATION error.

When vertex array pointer state is changed, for example by a call to NormalPointer, the current buffer object binding (GL.ARRAY_BUFFER_BINDING) is copied into the corresponding client state for the vertex array type being changed, for example GL.NORMAL_ARRAY_BUFFER_BINDING. While a non-zero buffer object is bound to the GL.ARRAY_BUFFER target, the vertex array pointer parameter that is traditionally interpreted as a pointer to client-side memory is instead interpreted as an offset within the buffer object measured in basic machine units.

While a non-zero buffer object is bound to the GL.ELEMENT_ARRAY_BUFFER target, the indices parameter of DrawElements, DrawRangeElements, or MultiDrawElements that is traditionally interpreted as a pointer to client-side memory is instead interpreted as an offset within the buffer object measured in basic machine units.

While a non-zero buffer object is bound to the GL.PIXEL_PACK_BUFFER target, the following commands are affected: GetCompressedTexImage, GetConvolutionFilter, GetHistogram, GetMinmax, GetPixelMap, GetPolygonStipple, GetSeparableFilter, GetTexImage, and ReadPixels. The pointer parameter that is traditionally interpreted as a pointer to client-side memory where the pixels are to be packed is instead interpreted as an offset within the buffer object measured in basic machine units.

While a non-zero buffer object is bound to the GL.PIXEL_UNPACK_BUFFER target, the following commands are affected: Bitmap, ColorSubTable, ColorTable, CompressedTexImage1D, CompressedTexImage2D, CompressedTexImage3D, CompressedTexSubImage1D, CompressedTexSubImage2D, CompressedTexSubImage3D, ConvolutionFilter1D, ConvolutionFilter2D, DrawPixels, PixelMap, PolygonStipple, SeparableFilter2D, TexImage1D, TexImage2D, TexImage3D, TexSubImage1D, TexSubImage2D, and TexSubImage3D. The pointer parameter that is traditionally interpreted as a pointer to client-side memory from which the pixels are to be unpacked is instead interpreted as an offset within the buffer object measured in basic machine units.

A buffer object binding created with BindBuffer remains active until a different buffer object name is bound to the same target, or until the bound buffer object is deleted with DeleteBuffers.

Once created, a named buffer object may be re-bound to any target as often as needed. However, the GL implementation may make choices about how to optimize the storage of a buffer object based on its initial binding target.

Error GL.INVALID_ENUM is generated if target is not one of the allowable values. GL.INVALID_OPERATION is generated if BindBuffer is executed between the execution of Begin and the corresponding execution of End.

BindBuffer is available in GL version 1.5 or greater.

func (*GL) BlendColor

func (gl *GL) BlendColor(red, green, blue, alpha glbase.Clampf)

https://www.opengl.org/sdk/docs/man2/xhtml/glBlendColor.xml

func (*GL) BlendEquationSeparate

func (gl *GL) BlendEquationSeparate(modeRGB, modeAlpha glbase.Enum)

https://www.opengl.org/sdk/docs/man2/xhtml/glBlendEquationSeparate.xml

func (*GL) BlendFunc

func (gl *GL) BlendFunc(sfactor, dfactor glbase.Enum)

https://www.opengl.org/sdk/docs/man2/xhtml/glBlendFunc.xml

func (*GL) BlendFuncSeparate

func (gl *GL) BlendFuncSeparate(srcRGB, dstRGB, srcAlpha, dstAlpha glbase.Enum)

https://www.opengl.org/sdk/docs/man2/xhtml/glBlendFuncSeparate.xml

func (*GL) BufferData

func (gl *GL) BufferData(target glbase.Enum, size int, data interface{}, usage glbase.Enum)

BufferData creates a new data store for the buffer object currently bound to target. Any pre-existing data store is deleted. The new data store is created with the specified size in bytes and usage. If data is not nil, it must be a slice that is used to initialize the data store. In that case the size parameter is ignored and the store size will match the slice data size.

In its initial state, the new data store is not mapped, it has a NULL mapped pointer, and its mapped access is GL.READ_WRITE.

The target constant must be one of GL.ARRAY_BUFFER, GL.COPY_READ_BUFFER, GL.COPY_WRITE_BUFFER, GL.ELEMENT_ARRAY_BUFFER, GL.PIXEL_PACK_BUFFER, GL.PIXEL_UNPACK_BUFFER, GL.TEXTURE_BUFFER, GL.TRANSFORM_FEEDBACK_BUFFER, or GL.UNIFORM_BUFFER.

The usage parameter is a hint to the GL implementation as to how a buffer object's data store will be accessed. This enables the GL implementation to make more intelligent decisions that may significantly impact buffer object performance. It does not, however, constrain the actual usage of the data store. usage can be broken down into two parts: first, the frequency of access (modification and usage), and second, the nature of that access.

A usage frequency of STREAM and nature of DRAW is specified via the constant GL.STREAM_DRAW, for example.

The usage frequency of access may be one of:

STREAM
    The data store contents will be modified once and used at most a few times.

STATIC
    The data store contents will be modified once and used many times.

DYNAMIC
    The data store contents will be modified repeatedly and used many times.

The usage nature of access may be one of:

DRAW
    The data store contents are modified by the application, and used as
    the source for GL drawing and image specification commands.

READ
    The data store contents are modified by reading data from the GL,
    and used to return that data when queried by the application.

COPY
    The data store contents are modified by reading data from the GL,
    and used as the source for GL drawing and image specification
    commands.

Clients must align data elements consistent with the requirements of the client platform, with an additional base-level requirement that an offset within a buffer to a datum comprising N bytes be a multiple of N.

Error GL.INVALID_ENUM is generated if target is not one of the accepted buffer targets. GL.INVALID_ENUM is generated if usage is not GL.STREAM_DRAW, GL.STREAM_READ, GL.STREAM_COPY, GL.STATIC_DRAW, GL.STATIC_READ, GL.STATIC_COPY, GL.DYNAMIC_DRAW, GL.DYNAMIC_READ, or GL.DYNAMIC_COPY. GL.INVALID_VALUE is generated if size is negative. GL.INVALID_OPERATION is generated if the reserved buffer object name 0 is bound to target. GL.OUT_OF_MEMORY is generated if the GL is unable to create a data store with the specified size.

func (*GL) BufferSubData

func (gl *GL) BufferSubData(target glbase.Enum, offset, size int, data interface{})

https://www.opengl.org/sdk/docs/man2/xhtml/glBufferSubData.xml

func (*GL) ClearColor

func (gl *GL) ClearColor(red, green, blue, alpha glbase.Clampf)

https://www.opengl.org/sdk/docs/man2/xhtml/glClearColor.xml

func (*GL) ColorMask

func (gl *GL) ColorMask(red, green, blue, alpha bool)

https://www.opengl.org/sdk/docs/man2/xhtml/glColorMask.xml

func (*GL) CompileShader

func (gl *GL) CompileShader(shader glbase.Shader)

CompileShader compiles the source code strings that have been stored in the shader object specified by shader.

The compilation status will be stored as part of the shader object's state. This value will be set to GL.TRUE if the shader was compiled without errors and is ready for use, and GL.FALSE otherwise. It can be queried by calling GetShaderiv with arguments shader and GL.COMPILE_STATUS.

Compilation of a shader can fail for a number of reasons as specified by the OpenGL Shading Language Specification. Whether or not the compilation was successful, information about the compilation can be obtained from the shader object's information log by calling GetShaderInfoLog.

Error GL.INVALID_VALUE is generated if shader is not a value generated by OpenGL. GL.INVALID_OPERATION is generated if shader is not a shader object. GL.INVALID_OPERATION is generated if CompileShader is executed between the execution of Begin and the corresponding execution of End.

CompileShader is available in GL version 2.0 or greater.

func (*GL) CompressedTexImage2D

func (gl *GL) CompressedTexImage2D(target glbase.Enum, level int, internalFormat glbase.Enum, width, height, border, imageSize int, data interface{})

https://www.opengl.org/sdk/docs/man2/xhtml/glCompressedTexImage2D.xml

func (*GL) CompressedTexSubImage2D

func (gl *GL) CompressedTexSubImage2D(target glbase.Enum, level, xoffset, yoffset, width, height int, format glbase.Enum, imageSize int, data interface{})

https://www.opengl.org/sdk/docs/man2/xhtml/glCompressedTexSubImage2D.xml

func (*GL) CopyTexImage2D

func (gl *GL) CopyTexImage2D(target glbase.Enum, level int, internalFormat glbase.Enum, x, y, width, height, border int)

https://www.opengl.org/sdk/docs/man2/xhtml/glCopyTexImage2D.xml

func (*GL) CopyTexSubImage2D

func (gl *GL) CopyTexSubImage2D(target glbase.Enum, level, xoffset, yoffset, x, y, width, height int)

https://www.opengl.org/sdk/docs/man2/xhtml/glCopyTexSubImage2D.xml

func (*GL) CreateProgram

func (gl *GL) CreateProgram() glbase.Program

CreateProgram creates an empty program object and returns a non-zero value by which it can be referenced. A program object is an object to which shader objects can be attached. This provides a mechanism to specify the shader objects that will be linked to create a program. It also provides a means for checking the compatibility of the shaders that will be used to create a program (for instance, checking the compatibility between a vertex shader and a fragment shader). When no longer needed as part of a program object, shader objects can be detached.

One or more executables are created in a program object by successfully attaching shader objects to it with AttachShader, successfully compiling the shader objects with CompileShader, and successfully linking the program object with LinkProgram. These executables are made part of current state when UseProgram is called. Program objects can be deleted by calling DeleteProgram. The memory associated with the program object will be deleted when it is no longer part of current rendering state for any context.

Like display lists and texture objects, the name space for program objects may be shared across a set of contexts, as long as the server sides of the contexts share the same address space. If the name space is shared across contexts, any attached objects and the data associated with those attached objects are shared as well.

Applications are responsible for providing the synchronization across API calls when objects are accessed from different execution threads.

This function returns 0 if an error occurs creating the program object.

Error GL.INVALID_OPERATION is generated if CreateProgram is executed between the execution of Begin and the corresponding execution of End.

CreateProgram is available in GL version 2.0 or greater.

func (*GL) CreateShader

func (gl *GL) CreateShader(gltype glbase.Enum) glbase.Shader

CreateShader creates an empty shader object and returns a non-zero value by which it can be referenced. A shader object is used to maintain the source code strings that define a shader. shaderType indicates the type of shader to be created.

Two types of shaders are supported. A shader of type GL.VERTEX_SHADER is a shader that is intended to run on the programmable vertex processor and replace the fixed functionality vertex processing in OpenGL. A shader of type GL.FRAGMENT_SHADER is a shader that is intended to run on the programmable fragment processor and replace the fixed functionality fragment processing in OpenGL.

When created, a shader object's GL.SHADER_TYPE parameter is set to either GL.VERTEX_SHADER or GL.FRAGMENT_SHADER, depending on the value of shaderType.

Like display lists and texture objects, the name space for shader objects may be shared across a set of contexts, as long as the server sides of the contexts share the same address space. If the name space is shared across contexts, any attached objects and the data associated with those attached objects are shared as well.

This function returns 0 if an error occurs creating the shader object.

Error GL.INVALID_ENUM is generated if shaderType is not an accepted value. GL.INVALID_OPERATION is generated if CreateShader is executed between the execution of Begin and the corresponding execution of End.

CreateShader is available in GL version 2.0 or greater.

func (*GL) DeleteBuffers

func (gl *GL) DeleteBuffers(buffers []glbase.Buffer)

DeleteBuffers deletes the buffer objects whose names are stored in the buffers slice.

After a buffer object is deleted, it has no contents, and its name is free for reuse (for example by GenBuffers). If a buffer object that is currently bound is deleted, the binding reverts to 0 (the absence of any buffer object, which reverts to client memory usage).

DeleteBuffers silently ignores 0's and names that do not correspond to existing buffer objects.

Error GL.INVALID_VALUE is generated if n is negative. GL.INVALID_OPERATION is generated if DeleteBuffers is executed between the execution of Begin and the corresponding execution of End.

DeleteBuffers is available in GL version 1.5 or greater.

func (*GL) DeleteFramebuffers

func (gl *GL) DeleteFramebuffers(framebuffers []glbase.Framebuffer)

DeleteFramebuffers deletes the framebuffer objects whose names are stored in the framebuffers slice. The name zero is reserved by the GL and is silently ignored, should it occur in framebuffers, as are other unused names. Once a framebuffer object is deleted, its name is again unused and it has no attachments. If a framebuffer that is currently bound to one or more of the targets GL.DRAW_FRAMEBUFFER or GL.READ_FRAMEBUFFER is deleted, it is as though BindFramebuffer had been executed with the corresponding target and framebuffer zero.

Error GL.INVALID_VALUE is generated if n is negative.

DeleteFramebuffers is available in GL version 3.0 or greater.

func (*GL) DeleteProgram

func (gl *GL) DeleteProgram(program glbase.Program)

DeleteProgram frees the memory and invalidates the name associated with the program object specified by program. This command effectively undoes the effects of a call to CreateProgram.

If a program object is in use as part of current rendering state, it will be flagged for deletion, but it will not be deleted until it is no longer part of current state for any rendering context. If a program object to be deleted has shader objects attached to it, those shader objects will be automatically detached but not deleted unless they have already been flagged for deletion by a previous call to DeleteShader. A value of 0 for program will be silently ignored.

To determine whether a program object has been flagged for deletion, call GetProgram with arguments program and GL.DELETE_STATUS.

Error GL.INVALID_VALUE is generated if program is not a value generated by OpenGL.

DeleteProgram is available in GL version 2.0 or greater.

func (*GL) DeleteRenderbuffers

func (gl *GL) DeleteRenderbuffers(renderbuffers []glbase.Renderbuffer)

DeleteRenderbuffers deletes the renderbuffer objects whose names are stored in the renderbuffers slice. The name zero is reserved by the GL and is silently ignored, should it occur in renderbuffers, as are other unused names. Once a renderbuffer object is deleted, its name is again unused and it has no contents. If a renderbuffer that is currently bound to the target GL.RENDERBUFFER is deleted, it is as though BindRenderbuffer had been executed with a target of GL.RENDERBUFFER and a name of zero.

If a renderbuffer object is attached to one or more attachment points in the currently bound framebuffer, then it as if FramebufferRenderbuffer had been called, with a renderbuffer of zero for each attachment point to which this image was attached in the currently bound framebuffer. In other words, this renderbuffer object is first detached from all attachment ponits in the currently bound framebuffer. Note that the renderbuffer image is specifically not detached from any non-bound framebuffers.

Error GL.INVALID_VALUE is generated if n is negative.

DeleteRenderbuffers is available in GL version 3.0 or greater.

func (*GL) DeleteShader

func (gl *GL) DeleteShader(shader glbase.Shader)

DeleteShader frees the memory and invalidates the name associated with the shader object specified by shader. This command effectively undoes the effects of a call to CreateShader.

If a shader object to be deleted is attached to a program object, it will be flagged for deletion, but it will not be deleted until it is no longer attached to any program object, for any rendering context (it must be detached from wherever it was attached before it will be deleted). A value of 0 for shader will be silently ignored.

To determine whether an object has been flagged for deletion, call GetShader with arguments shader and GL.DELETE_STATUS.

Error GL.INVALID_VALUE is generated if shader is not a value generated by OpenGL.

DeleteShader is available in GL version 2.0 or greater.

func (*GL) DeleteTextures

func (gl *GL) DeleteTextures(textures []glbase.Texture)

DeleteTextures deletes the textures objects whose names are stored in the textures slice. After a texture is deleted, it has no contents or dimensionality, and its name is free for reuse (for example by GenTextures). If a texture that is currently bound is deleted, the binding reverts to 0 (the default texture).

DeleteTextures silently ignores 0's and names that do not correspond to existing textures.

Error GL.INVALID_VALUE is generated if n is negative.

DeleteTextures is available in GL version 2.0 or greater.

func (*GL) DrawArrays

func (gl *GL) DrawArrays(mode glbase.Enum, first, count int)

https://www.opengl.org/sdk/docs/man2/xhtml/glDrawArrays.xml

func (*GL) DrawElements

func (gl *GL) DrawElements(mode glbase.Enum, count int, gltype glbase.Enum, indices interface{})

https://www.opengl.org/sdk/docs/man2/xhtml/glDrawElements.xml

func (*GL) FramebufferRenderbuffer

func (gl *GL) FramebufferRenderbuffer(target, attachment, renderbuffertarget glbase.Enum, renderbuffer glbase.Renderbuffer)

https://www.opengl.org/sdk/docs/man2/xhtml/glFramebufferRenderbuffer.xml

func (*GL) FramebufferTexture2D

func (gl *GL) FramebufferTexture2D(target, attachment, textarget glbase.Enum, texture glbase.Texture, level int)

https://www.opengl.org/sdk/docs/man2/xhtml/glFramebufferTexture2D.xml

func (*GL) GenBuffers

func (gl *GL) GenBuffers(n int) []glbase.Buffer

GenBuffers returns n buffer object names. There is no guarantee that the names form a contiguous set of integers; however, it is guaranteed that none of the returned names was in use immediately before the call to GenBuffers.

Buffer object names returned by a call to GenBuffers are not returned by subsequent calls, unless they are first deleted with DeleteBuffers.

No buffer objects are associated with the returned buffer object names until they are first bound by calling BindBuffer.

Error GL.INVALID_VALUE is generated if n is negative. GL.INVALID_OPERATION is generated if GenBuffers is executed between the execution of Begin and the corresponding execution of End.

GenBuffers is available in GL version 1.5 or greater.

func (*GL) GenFramebuffers

func (gl *GL) GenFramebuffers(n int) []glbase.Framebuffer

GenFramebuffers returns n framebuffer object names in ids. There is no guarantee that the names form a contiguous set of integers; however, it is guaranteed that none of the returned names was in use immediately before the call to GenFramebuffers.

Framebuffer object names returned by a call to GenFramebuffers are not returned by subsequent calls, unless they are first deleted with DeleteFramebuffers.

The names returned in ids are marked as used, for the purposes of GenFramebuffers only, but they acquire state and type only when they are first bound.

Error GL.INVALID_VALUE is generated if n is negative.

func (*GL) GenRenderbuffers

func (gl *GL) GenRenderbuffers(n int) []glbase.Renderbuffer

GenRenderbuffers returns n renderbuffer object names in renderbuffers. There is no guarantee that the names form a contiguous set of integers; however, it is guaranteed that none of the returned names was in use immediately before the call to GenRenderbuffers.

Renderbuffer object names returned by a call to GenRenderbuffers are not returned by subsequent calls, unless they are first deleted with DeleteRenderbuffers.

The names returned in renderbuffers are marked as used, for the purposes of GenRenderbuffers only, but they acquire state and type only when they are first bound.

Error GL.INVALID_VALUE is generated if n is negative.

GenRenderbuffers is available in GL version 3.0 or greater.

func (*GL) GenTextures

func (gl *GL) GenTextures(n int) []glbase.Texture

GenTextures returns n texture names in textures. There is no guarantee that the names form a contiguous set of integers; however, it is guaranteed that none of the returned names was in use immediately before the call to GenTextures.

The generated textures have no dimensionality; they assume the dimensionality of the texture target to which they are first bound (see BindTexture).

Texture names returned by a call to GenTextures are not returned by subsequent calls, unless they are first deleted with DeleteTextures.

Error GL.INVALID_VALUE is generated if n is negative.

GenTextures is available in GL version 2.0 or greater.

func (*GL) GetActiveAttrib

func (gl *GL) GetActiveAttrib(program glbase.Program, index glbase.Attrib, bufSize int32, length []int32, size []int, gltype []glbase.Enum, name []byte)

https://www.opengl.org/sdk/docs/man2/xhtml/glGetActiveAttrib.xml

func (*GL) GetActiveUniform

func (gl *GL) GetActiveUniform(program glbase.Program, index uint32, bufSize int32, length []int32, size []int, gltype []glbase.Enum, name []byte)

https://www.opengl.org/sdk/docs/man2/xhtml/glGetActiveUniform.xml

func (*GL) GetAttachedShaders

func (gl *GL) GetAttachedShaders(program glbase.Program, maxcount int32, count []int, shaders []glbase.Shader)

https://www.opengl.org/sdk/docs/man2/xhtml/glGetAttachedShaders.xml

func (*GL) GetAttribLocation

func (gl *GL) GetAttribLocation(program glbase.Program, name string) glbase.Attrib

GetAttribLocation queries the previously linked program object specified by program for the attribute variable specified by name and returns the index of the generic vertex attribute that is bound to that attribute variable. If name is a matrix attribute variable, the index of the first column of the matrix is returned. If the named attribute variable is not an active attribute in the specified program object or if name starts with the reserved prefix "gl_", a value of -1 is returned.

The association between an attribute variable name and a generic attribute index can be specified at any time by calling BindAttribLocation. Attribute bindings do not go into effect until LinkProgram is called. After a program object has been linked successfully, the index values for attribute variables remain fixed until the next link command occurs. The attribute values can only be queried after a link if the link was successful. GetAttribLocation returns the binding that actually went into effect the last time LinkProgram was called for the specified program object. Attribute bindings that have been specified since the last link operation are not returned by GetAttribLocation.

Error GL_INVALID_OPERATION is generated if program is not a value generated by OpenGL. GL_INVALID_OPERATION is generated if program is not a program object. GL_INVALID_OPERATION is generated if program has not been successfully linked. GL_INVALID_OPERATION is generated if GetAttribLocation is executed between the execution of Begin and the corresponding execution of End.

GetAttribLocation is available in GL version 2.0 or greater.

func (*GL) GetBufferParameteriv

func (gl *GL) GetBufferParameteriv(target, pname glbase.Enum, params []int32)

https://www.opengl.org/sdk/docs/man2/xhtml/glGetBufferParameteriv.xml

func (*GL) GetFramebufferAttachmentParameteriv

func (gl *GL) GetFramebufferAttachmentParameteriv(target, attachment, pname glbase.Enum, params []int32)

https://www.opengl.org/sdk/docs/man2/xhtml/glGetFramebufferAttachmentParameteriv.xml

func (*GL) GetProgramInfoLog

func (gl *GL) GetProgramInfoLog(program glbase.Program) []byte

GetProgramInfoLog returns the information log for the specified program object. The information log for a program object is modified when the program object is linked or validated.

The information log for a program object is either an empty string, or a string containing information about the last link operation, or a string containing information about the last validation operation. It may contain diagnostic messages, warning messages, and other information. When a program object is created, its information log will be a string of length 0, and the size of the current log can be obtained by calling GetProgramiv with the value GL.INFO_LOG_LENGTH.

Error GL.INVALID_VALUE is generated if program is not a value generated by OpenGL. GL.INVALID_OPERATION is generated if program is not a program object.

func (*GL) GetProgramiv

func (gl *GL) GetProgramiv(program glbase.Program, pname glbase.Enum, params []int32)

GetProgramiv returns in params the value of a parameter for a specific program object. The following parameters are defined:

GL.DELETE_STATUS
    params returns GL.TRUE if program is currently flagged for deletion,
    and GL.FALSE otherwise.

GL.LINK_STATUS
    params returns GL.TRUE if the last link operation on program was
    successful, and GL.FALSE otherwise.

GL.VALIDATE_STATUS
    params returns GL.TRUE or if the last validation operation on
    program was successful, and GL.FALSE otherwise.

GL.INFO_LOG_LENGTH
    params returns the number of characters in the information log for
    program including the null termination character (the size of
    the character buffer required to store the information log). If
    program has no information log, a value of 0 is returned.

GL.ATTACHED_SHADERS
    params returns the number of shader objects attached to program.

GL.ACTIVE_ATTRIBUTES
    params returns the number of active attribute variables for program.

GL.ACTIVE_ATTRIBUTE_MAX_LENGTH
    params returns the length of the longest active attribute name for
    program, including the null termination character (the size of
    the character buffer required to store the longest attribute name).
    If no active attributes exist, 0 is returned.

GL.ACTIVE_UNIFORMS
    params returns the number of active uniform variables for program.

GL.ACTIVE_UNIFORM_MAX_LENGTH
    params returns the length of the longest active uniform variable
    name for program, including the null termination character (i.e.,
    the size of the character buffer required to store the longest
    uniform variable name). If no active uniform variables exist, 0 is
    returned.

GL.TRANSFORM_FEEDBACK_BUFFER_MODE
    params returns a symbolic constant indicating the buffer mode used
    when transform feedback is active. This may be GL.SEPARATE_ATTRIBS
    or GL.INTERLEAVED_ATTRIBS.

GL.TRANSFORM_FEEDBACK_VARYINGS
    params returns the number of varying variables to capture in transform
    feedback mode for the program.

GL.TRANSFORM_FEEDBACK_VARYING_MAX_LENGTH
    params returns the length of the longest variable name to be used for
    transform feedback, including the null-terminator.

GL.GEOMETRY_VERTICES_OUT
    params returns the maximum number of vertices that the geometry shader in
    program will output.

GL.GEOMETRY_INPUT_TYPE
    params returns a symbolic constant indicating the primitive type accepted
    as input to the geometry shader contained in program.

GL.GEOMETRY_OUTPUT_TYPE
    params returns a symbolic constant indicating the primitive type that will
    be output by the geometry shader contained in program.

GL.ACTIVE_UNIFORM_BLOCKS and GL.ACTIVE_UNIFORM_BLOCK_MAX_NAME_LENGTH are available only if the GL version 3.1 or greater.

GL.GEOMETRY_VERTICES_OUT, GL.GEOMETRY_INPUT_TYPE and GL.GEOMETRY_OUTPUT_TYPE are accepted only if the GL version is 3.2 or greater.

Error GL.INVALID_VALUE is generated if program is not a value generated by OpenGL. GL.INVALID_OPERATION is generated if program does not refer to a program object. GL.INVALID_OPERATION is generated if pname is GL.GEOMETRY_VERTICES_OUT, GL.GEOMETRY_INPUT_TYPE, or GL.GEOMETRY_OUTPUT_TYPE, and program does not contain a geometry shader. GL.INVALID_ENUM is generated if pname is not an accepted value.

func (*GL) GetRenderbufferParameteriv

func (gl *GL) GetRenderbufferParameteriv(target, pname glbase.Enum, params []int32)

https://www.opengl.org/sdk/docs/man2/xhtml/glGetRenderbufferParameteriv.xml

func (*GL) GetShaderInfoLog

func (gl *GL) GetShaderInfoLog(shader glbase.Shader) []byte

GetShaderInfoLog returns the information log for the specified shader object. The information log for a shader object is modified when the shader is compiled.

The information log for a shader object is a string that may contain diagnostic messages, warning messages, and other information about the last compile operation. When a shader object is created, its information log will be a string of length 0, and the size of the current log can be obtained by calling GetShaderiv with the value GL.INFO_LOG_LENGTH.

The information log for a shader object is the OpenGL implementer's primary mechanism for conveying information about the compilation process. Therefore, the information log can be helpful to application developers during the development process, even when compilation is successful. Application developers should not expect different OpenGL implementations to produce identical information logs.

Error GL.INVALID_VALUE is generated if shader is not a value generated by OpenGL. GL.INVALID_OPERATION is generated if shader is not a shader object. GL.INVALID_VALUE is generated if maxLength is less than 0. GL.INVALID_OPERATION is generated if GetShaderInfoLog is executed between the execution of Begin and the corresponding execution of End.

GetShaderInfoLog is available in GL version 2.0 or greater.

func (*GL) GetShaderPrecisionFormat

func (gl *GL) GetShaderPrecisionFormat(shadertype, precisionType glbase.Enum, range_, precision []int32)

https://www.opengl.org/sdk/docs/man2/xhtml/glGetShaderPrecisionFormat.xml

func (*GL) GetShaderSource

func (gl *GL) GetShaderSource(shader glbase.Shader, bufSize int32, length []int32, source []byte)

https://www.opengl.org/sdk/docs/man2/xhtml/glGetShaderSource.xml

func (*GL) GetShaderiv

func (gl *GL) GetShaderiv(shader glbase.Shader, pname glbase.Enum, params []int32)

GetShaderiv GetShader returns in params the value of a parameter for a specific shader object. The following parameters are defined:

GL.SHADER_TYPE
  params returns GL.VERTEX_SHADER if shader is a vertex shader object,
  and GL.FRAGMENT_SHADER if shader is a fragment shader object.

GL.DELETE_STATUS
  params returns GL.TRUE if shader is currently flagged for deletion,
  and GL.FALSE otherwise.

GL.COMPILE_STATUS
  params returns GL.TRUE if the last compile operation on shader was
  successful, and GL.FALSE otherwise.

GL.INFO_LOG_LENGTH
  params returns the number of characters in the information log for
  shader including the null termination character (the size of the
  character buffer required to store the information log). If shader has
  no information log, a value of 0 is returned.

GL.SHADER_SOURCE_LENGTH
  params returns the length of the concatenation of the source strings
  that make up the shader source for the shader, including the null
  termination character. (the size of the character buffer
  required to store the shader source). If no source code exists, 0 is
  returned.

Error GL.INVALID_VALUE is generated if shader is not a value generated by OpenGL. GL.INVALID_OPERATION is generated if shader does not refer to a shader object. GL.INVALID_ENUM is generated if pname is not an accepted value. GL.INVALID_OPERATION is generated if GetShader is executed between the execution of Begin and the corresponding execution of End.

GetShaderiv is available in GL version 2.0 or greater.

func (*GL) GetTexParameterfv

func (gl *GL) GetTexParameterfv(target, pname glbase.Enum, params []float32)

https://www.opengl.org/sdk/docs/man2/xhtml/glGetTexParameterfv.xml

func (*GL) GetTexParameteriv

func (gl *GL) GetTexParameteriv(target, pname glbase.Enum, params []int32)

https://www.opengl.org/sdk/docs/man2/xhtml/glGetTexParameteriv.xml

func (*GL) GetUniformLocation

func (gl *GL) GetUniformLocation(program glbase.Program, name string) glbase.Uniform

GetUniformLocation returns an integer that represents the location of a specific uniform variable within a program object. name must be an active uniform variable name in program that is not a structure, an array of structures, or a subcomponent of a vector or a matrix. This function returns -1 if name does not correspond to an active uniform variable in program or if name starts with the reserved prefix "gl_".

Uniform variables that are structures or arrays of structures may be queried by calling GetUniformLocation for each field within the structure. The array element operator "[]" and the structure field operator "." may be used in name in order to select elements within an array or fields within a structure. The result of using these operators is not allowed to be another structure, an array of structures, or a subcomponent of a vector or a matrix. Except if the last part of name indicates a uniform variable array, the location of the first element of an array can be retrieved by using the name of the array, or by using the name appended by "[0]".

The actual locations assigned to uniform variables are not known until the program object is linked successfully. After linking has occurred, the command GetUniformLocation can be used to obtain the location of a uniform variable. This location value can then be passed to Uniform to set the value of the uniform variable or to GetUniform in order to query the current value of the uniform variable. After a program object has been linked successfully, the index values for uniform variables remain fixed until the next link command occurs. Uniform variable locations and values can only be queried after a link if the link was successful.

Error GL.INVALID_VALUE is generated if program is not a value generated by OpenGL. GL.INVALID_OPERATION is generated if program is not a program object. GL.INVALID_OPERATION is generated if program has not been successfully linked. GL.INVALID_OPERATION is generated if GetUniformLocation is executed between the execution of Begin and the corresponding execution of End.

GetUniformLocation is available in GL version 2.0 or greater.

func (*GL) GetUniformfv

func (gl *GL) GetUniformfv(program glbase.Program, location glbase.Uniform, params []float32)

GetUniformfv returns in params the value of the specified uniform variable. The type of the uniform variable specified by location determines the number of values returned. If the uniform variable is defined in the shader as a boolean, int, or float, a single value will be returned. If it is defined as a vec2, ivec2, or bvec2, two values will be returned. If it is defined as a vec3, ivec3, or bvec3, three values will be returned, and so on. To query values stored in uniform variables declared as arrays, call GetUniformfv for each element of the array. To query values stored in uniform variables declared as structures, call GetUniformfv for each field in the structure. The values for uniform variables declared as a matrix will be returned in column major order.

The locations assigned to uniform variables are not known until the program object is linked. After linking has occurred, the command GetUniformLocation can be used to obtain the location of a uniform variable. This location value can then be passed to GetUniformfv in order to query the current value of the uniform variable. After a program object has been linked successfully, the index values for uniform variables remain fixed until the next link command occurs. The uniform variable values can only be queried after a link if the link was successful.

Error GL.INVALID_VALUE is generated if program is not a value generated by OpenGL. GL.INVALID_OPERATION is generated if program is not a program object. GL.INVALID_OPERATION is generated if program has not been successfully linked. GL.INVALID_OPERATION is generated if location does not correspond to a valid uniform variable location for the specified program object. GL.INVALID_OPERATION is generated if GetUniformfv is executed between the execution of Begin and the corresponding execution of End.

GetUniformfv is available in GL version 2.0 or greater.

func (*GL) GetUniformiv

func (gl *GL) GetUniformiv(program glbase.Program, location glbase.Uniform, params []int32)

GetUniformiv returns in params the value of the specified uniform variable. The type of the uniform variable specified by location determines the number of values returned. If the uniform variable is defined in the shader as a boolean, int, or float, a single value will be returned. If it is defined as a vec2, ivec2, or bvec2, two values will be returned. If it is defined as a vec3, ivec3, or bvec3, three values will be returned, and so on. To query values stored in uniform variables declared as arrays, call GetUniformiv for each element of the array. To query values stored in uniform variables declared as structures, call GetUniformiv for each field in the structure. The values for uniform variables declared as a matrix will be returned in column major order.

The locations assigned to uniform variables are not known until the program object is linked. After linking has occurred, the command GetUniformLocation can be used to obtain the location of a uniform variable. This location value can then be passed to GetUniformiv in order to query the current value of the uniform variable. After a program object has been linked successfully, the index values for uniform variables remain fixed until the next link command occurs. The uniform variable values can only be queried after a link if the link was successful.

Error GL.INVALID_VALUE is generated if program is not a value generated by OpenGL. GL.INVALID_OPERATION is generated if program is not a program object. GL.INVALID_OPERATION is generated if program has not been successfully linked. GL.INVALID_OPERATION is generated if location does not correspond to a valid uniform variable location for the specified program object. GL.INVALID_OPERATION is generated if GetUniformiv is executed between the execution of Begin and the corresponding execution of End.

GetUniformiv is available in GL version 2.0 or greater.

func (*GL) GetVertexAttribfv

func (gl *GL) GetVertexAttribfv(index glbase.Attrib, pname glbase.Enum, params []float32)

GetVertexAttribfv returns in params the value of a generic vertex attribute parameter. The generic vertex attribute to be queried is specified by index, and the parameter to be queried is specified by pname.

The accepted parameter names are as follows:

GL.VERTEX_ATTRIB_ARRAY_BUFFER_BINDING
    params returns a single value, the name of the buffer object
    currently bound to the binding point corresponding to generic vertex
    attribute array index. If no buffer object is bound, 0 is returned.
    The initial value is 0.

GL.VERTEX_ATTRIB_ARRAY_ENABLED
    params returns a single value that is non-zero (true) if the vertex
    attribute array for index is enabled and 0 (false) if it is
    disabled. The initial value is 0.

GL.VERTEX_ATTRIB_ARRAY_SIZE
    params returns a single value, the size of the vertex attribute
    array for index. The size is the number of values for each element
    of the vertex attribute array, and it will be 1, 2, 3, or 4. The
    initial value is 4.

GL.VERTEX_ATTRIB_ARRAY_STRIDE
    params returns a single value, the array stride for (number of bytes
    between successive elements in) the vertex attribute array for
    index. A value of 0 indicates that the array elements are stored
    sequentially in memory. The initial value is 0.

GL.VERTEX_ATTRIB_ARRAY_TYPE
    params returns a single value, a symbolic constant indicating the
    array type for the vertex attribute array for index. Possible values
    are GL.BYTE, GL.UNSIGNED_BYTE, GL.SHORT, GL.UNSIGNED_SHORT, GL.INT,
    GL.UNSIGNED_INT, GL.FLOAT, and GL.DOUBLE. The initial value is
    GL.FLOAT.

GL.VERTEX_ATTRIB_ARRAY_NORMALIZED
    params returns a single value that is non-zero (true) if fixed-point
    data types for the vertex attribute array indicated by index are
    normalized when they are converted to floating point, and 0 (false)
    otherwise. The initial value is 0.

GL.CURRENT_VERTEX_ATTRIB
    params returns four values that represent the current value for the
    generic vertex attribute specified by index. Generic vertex
    attribute 0 is unique in that it has no current state, so an error
    will be generated if index is 0. The initial value for all other
    generic vertex attributes is (0,0,0,1).

All of the parameters except GL.CURRENT_VERTEX_ATTRIB represent client-side state.

Error GL.INVALID_VALUE is generated if index is greater than or equal to GL.MAX_VERTEX_ATTRIBS. GL.INVALID_ENUM is generated if pname is not an accepted value. GL.INVALID_OPERATION is generated if index is 0 and pname is GL.CURRENT_VERTEX_ATTRIB.

GetVertexAttribfv is available in GL version 2.0 or greater.

func (*GL) GetVertexAttribiv

func (gl *GL) GetVertexAttribiv(index glbase.Attrib, pname glbase.Enum, params []int32)

GetVertexAttribiv returns in params the value of a generic vertex attribute parameter. The generic vertex attribute to be queried is specified by index, and the parameter to be queried is specified by pname.

The accepted parameter names are as follows:

GL.VERTEX_ATTRIB_ARRAY_BUFFER_BINDING
    params returns a single value, the name of the buffer object
    currently bound to the binding point corresponding to generic vertex
    attribute array index. If no buffer object is bound, 0 is returned.
    The initial value is 0.

GL.VERTEX_ATTRIB_ARRAY_ENABLED
    params returns a single value that is non-zero (true) if the vertex
    attribute array for index is enabled and 0 (false) if it is
    disabled. The initial value is 0.

GL.VERTEX_ATTRIB_ARRAY_SIZE
    params returns a single value, the size of the vertex attribute
    array for index. The size is the number of values for each element
    of the vertex attribute array, and it will be 1, 2, 3, or 4. The
    initial value is 4.

GL.VERTEX_ATTRIB_ARRAY_STRIDE
    params returns a single value, the array stride for (number of bytes
    between successive elements in) the vertex attribute array for
    index. A value of 0 indicates that the array elements are stored
    sequentially in memory. The initial value is 0.

GL.VERTEX_ATTRIB_ARRAY_TYPE
    params returns a single value, a symbolic constant indicating the
    array type for the vertex attribute array for index. Possible values
    are GL.BYTE, GL.UNSIGNED_BYTE, GL.SHORT, GL.UNSIGNED_SHORT, GL.INT,
    GL.UNSIGNED_INT, GL.FLOAT, and GL.DOUBLE. The initial value is
    GL.FLOAT.

GL.VERTEX_ATTRIB_ARRAY_NORMALIZED
    params returns a single value that is non-zero (true) if fixed-point
    data types for the vertex attribute array indicated by index are
    normalized when they are converted to floating point, and 0 (false)
    otherwise. The initial value is 0.

GL.CURRENT_VERTEX_ATTRIB
    params returns four values that represent the current value for the
    generic vertex attribute specified by index. Generic vertex
    attribute 0 is unique in that it has no current state, so an error
    will be generated if index is 0. The initial value for all other
    generic vertex attributes is (0,0,0,1).

All of the parameters except GL.CURRENT_VERTEX_ATTRIB represent client-side state.

Error GL.INVALID_VALUE is generated if index is greater than or equal to GL.MAX_VERTEX_ATTRIBS. GL.INVALID_ENUM is generated if pname is not an accepted value. GL.INVALID_OPERATION is generated if index is 0 and pname is GL.CURRENT_VERTEX_ATTRIB.

GetVertexAttribiv is available in GL version 2.0 or greater.

func (*GL) Hint

func (gl *GL) Hint(target, mode glbase.Enum)

https://www.opengl.org/sdk/docs/man2/xhtml/glHint.xml

func (*GL) LinkProgram

func (gl *GL) LinkProgram(program glbase.Program)

LinkProgram links the program object specified by program. If any shader objects of type GL.VERTEX_SHADER are attached to program, they will be used to create an executable that will run on the programmable vertex processor. If any shader objects of type GL.FRAGMENT_SHADER are attached to program, they will be used to create an executable that will run on the programmable fragment processor.

The status of the link operation will be stored as part of the program object's state. This value will be set to GL.TRUE if the program object was linked without errors and is ready for use, and GL.FALSE otherwise. It can be queried by calling GetProgramiv with arguments program and GL.LINK_STATUS.

As a result of a successful link operation, all active user-defined uniform variables belonging to program will be initialized to 0, and each of the program object's active uniform variables will be assigned a location that can be queried by calling GetUniformLocation. Also, any active user-defined attribute variables that have not been bound to a generic vertex attribute index will be bound to one at this time.

Linking of a program object can fail for a number of reasons as specified in the OpenGL Shading Language Specification. The following lists some of the conditions that will cause a link error.

  • The number of active attribute variables supported by the implementation has been exceeded.

  • The storage limit for uniform variables has been exceeded.

  • The number of active uniform variables supported by the implementation has been exceeded.

  • The main function is missing for the vertex shader or the fragment shader.

  • A varying variable actually used in the fragment shader is not declared in the same way (or is not declared at all) in the vertex shader.

  • A reference to a function or variable name is unresolved.

  • A shared global is declared with two different types or two different initial values.

  • One or more of the attached shader objects has not been successfully compiled.

  • Binding a generic attribute matrix caused some rows of the matrix to fall outside the allowed maximum of GL.MAX_VERTEX_ATTRIBS.

  • Not enough contiguous vertex attribute slots could be found to bind attribute matrices.

When a program object has been successfully linked, the program object can be made part of current state by calling UseProgram. Whether or not the link operation was successful, the program object's information log will be overwritten. The information log can be retrieved by calling GetProgramInfoLog.

LinkProgram will also install the generated executables as part of the current rendering state if the link operation was successful and the specified program object is already currently in use as a result of a previous call to UseProgram. If the program object currently in use is relinked unsuccessfully, its link status will be set to GL.FALSE , but the executables and associated state will remain part of the current state until a subsequent call to UseProgram removes it from use. After it is removed from use, it cannot be made part of current state until it has been successfully relinked.

If program contains shader objects of type GL.VERTEX_SHADER but does not contain shader objects of type GL.FRAGMENT_SHADER, the vertex shader will be linked against the implicit interface for fixed functionality fragment processing. Similarly, if program contains shader objects of type GL.FRAGMENT_SHADER but it does not contain shader objects of type GL.VERTEX_SHADER, the fragment shader will be linked against the implicit interface for fixed functionality vertex processing.

The program object's information log is updated and the program is generated at the time of the link operation. After the link operation, applications are free to modify attached shader objects, compile attached shader objects, detach shader objects, delete shader objects, and attach additional shader objects. None of these operations affects the information log or the program that is part of the program object.

If the link operation is unsuccessful, any information about a previous link operation on program is lost (a failed link does not restore the old state of program). Certain information can still be retrieved from program even after an unsuccessful link operation. See for instance GetActiveAttrib and GetActiveUniform.

Error GL.INVALID_VALUE is generated if program is not a value generated by OpenGL. GL.INVALID_OPERATION is generated if program is not a program object. GL.INVALID_OPERATION is generated if LinkProgram is executed between the execution of Begin and the corresponding execution of End.

LinkProgram is available in GL version 2.0 or greater.

func (*GL) ReadPixels

func (gl *GL) ReadPixels(x, y, width, height int, format, gltype glbase.Enum, pixels interface{})

https://www.opengl.org/sdk/docs/man2/xhtml/glReadPixels.xml

func (*GL) RenderbufferStorage

func (gl *GL) RenderbufferStorage(target, internalFormat glbase.Enum, width, height int)

https://www.opengl.org/sdk/docs/man2/xhtml/glRenderbufferStorage.xml

func (*GL) Scissor

func (gl *GL) Scissor(x, y, width, height int)

https://www.opengl.org/sdk/docs/man2/xhtml/glScissor.xml

func (*GL) ShaderBinary

func (gl *GL) ShaderBinary(n int, shaders []glbase.Shader, binaryFormat glbase.Enum, binary interface{}, length int32)

https://www.opengl.org/sdk/docs/man2/xhtml/glShaderBinary.xml

func (*GL) ShaderSource

func (gl *GL) ShaderSource(shader glbase.Shader, source ...string)

ShaderSource sets the source code in shader to the provided source code. Any source code previously stored in the shader object is completely replaced.

Error GL.INVALID_VALUE is generated if shader is not a value generated by OpenGL. GL.INVALID_OPERATION is generated if shader is not a shader object. GL.INVALID_VALUE is generated if count is less than 0. GL.INVALID_OPERATION is generated if ShaderSource is executed between the execution of Begin and the corresponding execution of End.

ShaderSource is available in GL version 2.0 or greater.

func (*GL) StencilFuncSeparate

func (gl *GL) StencilFuncSeparate(face, glfunc glbase.Enum, ref int32, mask uint32)

https://www.opengl.org/sdk/docs/man2/xhtml/glStencilFuncSeparate.xml

func (*GL) StencilOp

func (gl *GL) StencilOp(fail, zfail, zpass glbase.Enum)

https://www.opengl.org/sdk/docs/man2/xhtml/glStencilOp.xml

func (*GL) StencilOpSeparate

func (gl *GL) StencilOpSeparate(face, fail, zfail, zpass glbase.Enum)

https://www.opengl.org/sdk/docs/man2/xhtml/glStencilOpSeparate.xml

func (*GL) TexImage2D

func (gl *GL) TexImage2D(target glbase.Enum, level int, internalFormat int32, width, height, border int, format, gltype glbase.Enum, pixels interface{})

https://www.opengl.org/sdk/docs/man2/xhtml/glTexImage2D.xml

func (*GL) TexParameterf

func (gl *GL) TexParameterf(target, pname glbase.Enum, param float32)

https://www.opengl.org/sdk/docs/man2/xhtml/glTexParameterf.xml

func (*GL) TexParameterfv

func (gl *GL) TexParameterfv(target, pname glbase.Enum, params []float32)

https://www.opengl.org/sdk/docs/man2/xhtml/glTexParameterfv.xml

func (*GL) TexParameteri

func (gl *GL) TexParameteri(target, pname glbase.Enum, param int32)

https://www.opengl.org/sdk/docs/man2/xhtml/glTexParameteri.xml

func (*GL) TexParameteriv

func (gl *GL) TexParameteriv(target, pname glbase.Enum, params []int32)

https://www.opengl.org/sdk/docs/man2/xhtml/glTexParameteriv.xml

func (*GL) TexSubImage2D

func (gl *GL) TexSubImage2D(target glbase.Enum, level, xoffset, yoffset, width, height int, format, gltype glbase.Enum, pixels interface{})

https://www.opengl.org/sdk/docs/man2/xhtml/glTexSubImage2D.xml

func (*GL) Uniform1f

func (gl *GL) Uniform1f(location glbase.Uniform, v0 float32)

Uniform1f modifies the value of a single uniform variable. The location of the uniform variable to be modified is specified by location, which should be a value returned by GetUniformLocation. Uniform1f operates on the program object that was made part of current state by calling UseProgram.

The functions Uniform{1|2|3|4}{f|i|ui} are used to change the value of the uniform variable specified by location using the values passed as arguments. The number specified in the function should match the number of components in the data type of the specified uniform variable (1 for float, int, unsigned int, bool; 2 for vec2, ivec2, uvec2, bvec2, etc.). The suffix f indicates that floating-point values are being passed; the suffix i indicates that integer values are being passed; the suffix ui indicates that unsigned integer values are being passed, and this type should also match the data type of the specified uniform variable. The i variants of this function should be used to provide values for uniform variables defined as int, ivec2, ivec3, ivec4, or arrays of these. The ui variants of this function should be used to provide values for uniform variables defined as unsigned int, uvec2, uvec3, uvec4, or arrays of these. The f variants should be used to provide values for uniform variables of type float, vec2, vec3, vec4, or arrays of these. Either the i, ui or f variants may be used to provide values for uniform variables of type bool, bvec2, bvec3, bvec4, or arrays of these. The uniform variable will be set to false if the input value is 0 or 0.0f, and it will be set to true otherwise.

Uniform1i and Uniform1iv are the only two functions that may be used to load uniform variables defined as sampler types. Loading samplers with any other function will result in a GL.INVALID_OPERATION error.

All active uniform variables defined in a program object are initialized to 0 when the program object is linked successfully. They retain the values assigned to them by a call to Uniform* until the next successful link operation occurs on the program object, when they are once again initialized to 0.

func (*GL) Uniform1fv

func (gl *GL) Uniform1fv(location glbase.Uniform, value []float32)

Uniform1fv modifies the value of a uniform variable or a uniform variable array. The location of the uniform variable to be modified is specified by location, which should be a value returned by GetUniformLocation. Uniform1fv operates on the program object that was made part of current state by calling UseProgram.

The functions Uniform{1|2|3|4}{f|i|ui}v can be used to modify a single uniform variable or a uniform variable array. These functions receive a slice with the values to be loaded into a uniform variable or a uniform variable array. A slice with length 1 should be used if modifying the value of a single uniform variable, and a length of 1 or greater can be used to modify an entire array or part of an array. When loading n elements starting at an arbitrary position m in a uniform variable array, elements m + n - 1 in the array will be replaced with the new values. If m + n - 1 is larger than the size of the uniform variable array, values for all array elements beyond the end of the array will be ignored. The number specified in the name of the command indicates the number of components for each element in value, and it should match the number of components in the data type of the specified uniform variable (1 for float, int, bool; 2 for vec2, ivec2, bvec2, etc.). The data type specified in the name of the command must match the data type for the specified uniform variable as described for Uniform{1|2|3|4}{f|i|ui}.

Uniform1i and Uniform1iv are the only two functions that may be used to load uniform variables defined as sampler types. Loading samplers with any other function will result in a GL.INVALID_OPERATION error.

All active uniform variables defined in a program object are initialized to 0 when the program object is linked successfully. They retain the values assigned to them by a call to Uniform* until the next successful link operation occurs on the program object, when they are once again initialized to 0.

func (*GL) Uniform1i

func (gl *GL) Uniform1i(location glbase.Uniform, v0 int32)

Uniform1i modifies the value of a single uniform variable. The location of the uniform variable to be modified is specified by location, which should be a value returned by GetUniformLocation. Uniform1i operates on the program object that was made part of current state by calling UseProgram.

The functions Uniform{1|2|3|4}{f|i|ui} are used to change the value of the uniform variable specified by location using the values passed as arguments. The number specified in the function should match the number of components in the data type of the specified uniform variable (1 for float, int, unsigned int, bool; 2 for vec2, ivec2, uvec2, bvec2, etc.). The suffix f indicates that floating-point values are being passed; the suffix i indicates that integer values are being passed; the suffix ui indicates that unsigned integer values are being passed, and this type should also match the data type of the specified uniform variable. The i variants of this function should be used to provide values for uniform variables defined as int, ivec2, ivec3, ivec4, or arrays of these. The ui variants of this function should be used to provide values for uniform variables defined as unsigned int, uvec2, uvec3, uvec4, or arrays of these. The f variants should be used to provide values for uniform variables of type float, vec2, vec3, vec4, or arrays of these. Either the i, ui or f variants may be used to provide values for uniform variables of type bool, bvec2, bvec3, bvec4, or arrays of these. The uniform variable will be set to false if the input value is 0 or 0.0f, and it will be set to true otherwise.

Uniform1i and Uniform1iv are the only two functions that may be used to load uniform variables defined as sampler types. Loading samplers with any other function will result in a GL.INVALID_OPERATION error.

All active uniform variables defined in a program object are initialized to 0 when the program object is linked successfully. They retain the values assigned to them by a call to Uniform* until the next successful link operation occurs on the program object, when they are once again initialized to 0.

func (*GL) Uniform1iv

func (gl *GL) Uniform1iv(location glbase.Uniform, value []int32)

Uniform1iv modifies the value of a uniform variable or a uniform variable array. The location of the uniform variable to be modified is specified by location, which should be a value returned by GetUniformLocation. Uniform1iv operates on the program object that was made part of current state by calling UseProgram.

The functions Uniform{1|2|3|4}{f|i|ui}v can be used to modify a single uniform variable or a uniform variable array. These functions receive a slice with the values to be loaded into a uniform variable or a uniform variable array. A slice with length 1 should be used if modifying the value of a single uniform variable, and a length of 1 or greater can be used to modify an entire array or part of an array. When loading n elements starting at an arbitrary position m in a uniform variable array, elements m + n - 1 in the array will be replaced with the new values. If m + n - 1 is larger than the size of the uniform variable array, values for all array elements beyond the end of the array will be ignored. The number specified in the name of the command indicates the number of components for each element in value, and it should match the number of components in the data type of the specified uniform variable (1 for float, int, bool; 2 for vec2, ivec2, bvec2, etc.). The data type specified in the name of the command must match the data type for the specified uniform variable as described for Uniform{1|2|3|4}{f|i|ui}.

Uniform1i and Uniform1iv are the only two functions that may be used to load uniform variables defined as sampler types. Loading samplers with any other function will result in a GL.INVALID_OPERATION error.

All active uniform variables defined in a program object are initialized to 0 when the program object is linked successfully. They retain the values assigned to them by a call to Uniform* until the next successful link operation occurs on the program object, when they are once again initialized to 0.

func (*GL) Uniform2f

func (gl *GL) Uniform2f(location glbase.Uniform, v0, v1 float32)

Uniform2f modifies the value of a single uniform variable. The location of the uniform variable to be modified is specified by location, which should be a value returned by GetUniformLocation. Uniform2f operates on the program object that was made part of current state by calling UseProgram.

The functions Uniform{1|2|3|4}{f|i|ui} are used to change the value of the uniform variable specified by location using the values passed as arguments. The number specified in the function should match the number of components in the data type of the specified uniform variable (1 for float, int, unsigned int, bool; 2 for vec2, ivec2, uvec2, bvec2, etc.). The suffix f indicates that floating-point values are being passed; the suffix i indicates that integer values are being passed; the suffix ui indicates that unsigned integer values are being passed, and this type should also match the data type of the specified uniform variable. The i variants of this function should be used to provide values for uniform variables defined as int, ivec2, ivec3, ivec4, or arrays of these. The ui variants of this function should be used to provide values for uniform variables defined as unsigned int, uvec2, uvec3, uvec4, or arrays of these. The f variants should be used to provide values for uniform variables of type float, vec2, vec3, vec4, or arrays of these. Either the i, ui or f variants may be used to provide values for uniform variables of type bool, bvec2, bvec3, bvec4, or arrays of these. The uniform variable will be set to false if the input value is 0 or 0.0f, and it will be set to true otherwise.

Uniform1i and Uniform1iv are the only two functions that may be used to load uniform variables defined as sampler types. Loading samplers with any other function will result in a GL.INVALID_OPERATION error.

All active uniform variables defined in a program object are initialized to 0 when the program object is linked successfully. They retain the values assigned to them by a call to Uniform* until the next successful link operation occurs on the program object, when they are once again initialized to 0.

func (*GL) Uniform2fv

func (gl *GL) Uniform2fv(location glbase.Uniform, value []float32)

Uniform2fv modifies the value of a uniform variable or a uniform variable array. The location of the uniform variable to be modified is specified by location, which should be a value returned by GetUniformLocation. Uniform2fv operates on the program object that was made part of current state by calling UseProgram.

The functions Uniform{1|2|3|4}{f|i|ui}v can be used to modify a single uniform variable or a uniform variable array. These functions receive a slice with the values to be loaded into a uniform variable or a uniform variable array. A slice with length 1 should be used if modifying the value of a single uniform variable, and a length of 1 or greater can be used to modify an entire array or part of an array. When loading n elements starting at an arbitrary position m in a uniform variable array, elements m + n - 1 in the array will be replaced with the new values. If m + n - 1 is larger than the size of the uniform variable array, values for all array elements beyond the end of the array will be ignored. The number specified in the name of the command indicates the number of components for each element in value, and it should match the number of components in the data type of the specified uniform variable (1 for float, int, bool; 2 for vec2, ivec2, bvec2, etc.). The data type specified in the name of the command must match the data type for the specified uniform variable as described for Uniform{1|2|3|4}{f|i|ui}.

Uniform1i and Uniform1iv are the only two functions that may be used to load uniform variables defined as sampler types. Loading samplers with any other function will result in a GL.INVALID_OPERATION error.

All active uniform variables defined in a program object are initialized to 0 when the program object is linked successfully. They retain the values assigned to them by a call to Uniform* until the next successful link operation occurs on the program object, when they are once again initialized to 0.

func (*GL) Uniform2i

func (gl *GL) Uniform2i(location glbase.Uniform, v0, v1 int32)

Uniform2i modifies the value of a single uniform variable. The location of the uniform variable to be modified is specified by location, which should be a value returned by GetUniformLocation. Uniform2i operates on the program object that was made part of current state by calling UseProgram.

The functions Uniform{1|2|3|4}{f|i|ui} are used to change the value of the uniform variable specified by location using the values passed as arguments. The number specified in the function should match the number of components in the data type of the specified uniform variable (1 for float, int, unsigned int, bool; 2 for vec2, ivec2, uvec2, bvec2, etc.). The suffix f indicates that floating-point values are being passed; the suffix i indicates that integer values are being passed; the suffix ui indicates that unsigned integer values are being passed, and this type should also match the data type of the specified uniform variable. The i variants of this function should be used to provide values for uniform variables defined as int, ivec2, ivec3, ivec4, or arrays of these. The ui variants of this function should be used to provide values for uniform variables defined as unsigned int, uvec2, uvec3, uvec4, or arrays of these. The f variants should be used to provide values for uniform variables of type float, vec2, vec3, vec4, or arrays of these. Either the i, ui or f variants may be used to provide values for uniform variables of type bool, bvec2, bvec3, bvec4, or arrays of these. The uniform variable will be set to false if the input value is 0 or 0.0f, and it will be set to true otherwise.

Uniform1i and Uniform1iv are the only two functions that may be used to load uniform variables defined as sampler types. Loading samplers with any other function will result in a GL.INVALID_OPERATION error.

All active uniform variables defined in a program object are initialized to 0 when the program object is linked successfully. They retain the values assigned to them by a call to Uniform* until the next successful link operation occurs on the program object, when they are once again initialized to 0.

func (*GL) Uniform2iv

func (gl *GL) Uniform2iv(location glbase.Uniform, value []int32)

Uniform2iv modifies the value of a uniform variable or a uniform variable array. The location of the uniform variable to be modified is specified by location, which should be a value returned by GetUniformLocation. Uniform2iv operates on the program object that was made part of current state by calling UseProgram.

The functions Uniform{1|2|3|4}{f|i|ui}v can be used to modify a single uniform variable or a uniform variable array. These functions receive a slice with the values to be loaded into a uniform variable or a uniform variable array. A slice with length 1 should be used if modifying the value of a single uniform variable, and a length of 1 or greater can be used to modify an entire array or part of an array. When loading n elements starting at an arbitrary position m in a uniform variable array, elements m + n - 1 in the array will be replaced with the new values. If m + n - 1 is larger than the size of the uniform variable array, values for all array elements beyond the end of the array will be ignored. The number specified in the name of the command indicates the number of components for each element in value, and it should match the number of components in the data type of the specified uniform variable (1 for float, int, bool; 2 for vec2, ivec2, bvec2, etc.). The data type specified in the name of the command must match the data type for the specified uniform variable as described for Uniform{1|2|3|4}{f|i|ui}.

Uniform1i and Uniform1iv are the only two functions that may be used to load uniform variables defined as sampler types. Loading samplers with any other function will result in a GL.INVALID_OPERATION error.

All active uniform variables defined in a program object are initialized to 0 when the program object is linked successfully. They retain the values assigned to them by a call to Uniform* until the next successful link operation occurs on the program object, when they are once again initialized to 0.

func (*GL) Uniform3f

func (gl *GL) Uniform3f(location glbase.Uniform, v0, v1, v2 float32)

Uniform3f modifies the value of a single uniform variable. The location of the uniform variable to be modified is specified by location, which should be a value returned by GetUniformLocation. Uniform3f operates on the program object that was made part of current state by calling UseProgram.

The functions Uniform{1|2|3|4}{f|i|ui} are used to change the value of the uniform variable specified by location using the values passed as arguments. The number specified in the function should match the number of components in the data type of the specified uniform variable (1 for float, int, unsigned int, bool; 2 for vec2, ivec2, uvec2, bvec2, etc.). The suffix f indicates that floating-point values are being passed; the suffix i indicates that integer values are being passed; the suffix ui indicates that unsigned integer values are being passed, and this type should also match the data type of the specified uniform variable. The i variants of this function should be used to provide values for uniform variables defined as int, ivec2, ivec3, ivec4, or arrays of these. The ui variants of this function should be used to provide values for uniform variables defined as unsigned int, uvec2, uvec3, uvec4, or arrays of these. The f variants should be used to provide values for uniform variables of type float, vec2, vec3, vec4, or arrays of these. Either the i, ui or f variants may be used to provide values for uniform variables of type bool, bvec2, bvec3, bvec4, or arrays of these. The uniform variable will be set to false if the input value is 0 or 0.0f, and it will be set to true otherwise.

Uniform1i and Uniform1iv are the only two functions that may be used to load uniform variables defined as sampler types. Loading samplers with any other function will result in a GL.INVALID_OPERATION error.

All active uniform variables defined in a program object are initialized to 0 when the program object is linked successfully. They retain the values assigned to them by a call to Uniform* until the next successful link operation occurs on the program object, when they are once again initialized to 0.

func (*GL) Uniform3fv

func (gl *GL) Uniform3fv(location glbase.Uniform, value []float32)

Uniform3fv modifies the value of a uniform variable or a uniform variable array. The location of the uniform variable to be modified is specified by location, which should be a value returned by GetUniformLocation. Uniform3fv operates on the program object that was made part of current state by calling UseProgram.

The functions Uniform{1|2|3|4}{f|i|ui}v can be used to modify a single uniform variable or a uniform variable array. These functions receive a slice with the values to be loaded into a uniform variable or a uniform variable array. A slice with length 1 should be used if modifying the value of a single uniform variable, and a length of 1 or greater can be used to modify an entire array or part of an array. When loading n elements starting at an arbitrary position m in a uniform variable array, elements m + n - 1 in the array will be replaced with the new values. If m + n - 1 is larger than the size of the uniform variable array, values for all array elements beyond the end of the array will be ignored. The number specified in the name of the command indicates the number of components for each element in value, and it should match the number of components in the data type of the specified uniform variable (1 for float, int, bool; 2 for vec2, ivec2, bvec2, etc.). The data type specified in the name of the command must match the data type for the specified uniform variable as described for Uniform{1|2|3|4}{f|i|ui}.

Uniform1i and Uniform1iv are the only two functions that may be used to load uniform variables defined as sampler types. Loading samplers with any other function will result in a GL.INVALID_OPERATION error.

All active uniform variables defined in a program object are initialized to 0 when the program object is linked successfully. They retain the values assigned to them by a call to Uniform* until the next successful link operation occurs on the program object, when they are once again initialized to 0.

func (*GL) Uniform3i

func (gl *GL) Uniform3i(location glbase.Uniform, v0, v1, v2 int32)

Uniform3i modifies the value of a single uniform variable. The location of the uniform variable to be modified is specified by location, which should be a value returned by GetUniformLocation. Uniform3i operates on the program object that was made part of current state by calling UseProgram.

The functions Uniform{1|2|3|4}{f|i|ui} are used to change the value of the uniform variable specified by location using the values passed as arguments. The number specified in the function should match the number of components in the data type of the specified uniform variable (1 for float, int, unsigned int, bool; 2 for vec2, ivec2, uvec2, bvec2, etc.). The suffix f indicates that floating-point values are being passed; the suffix i indicates that integer values are being passed; the suffix ui indicates that unsigned integer values are being passed, and this type should also match the data type of the specified uniform variable. The i variants of this function should be used to provide values for uniform variables defined as int, ivec2, ivec3, ivec4, or arrays of these. The ui variants of this function should be used to provide values for uniform variables defined as unsigned int, uvec2, uvec3, uvec4, or arrays of these. The f variants should be used to provide values for uniform variables of type float, vec2, vec3, vec4, or arrays of these. Either the i, ui or f variants may be used to provide values for uniform variables of type bool, bvec2, bvec3, bvec4, or arrays of these. The uniform variable will be set to false if the input value is 0 or 0.0f, and it will be set to true otherwise.

Uniform1i and Uniform1iv are the only two functions that may be used to load uniform variables defined as sampler types. Loading samplers with any other function will result in a GL.INVALID_OPERATION error.

All active uniform variables defined in a program object are initialized to 0 when the program object is linked successfully. They retain the values assigned to them by a call to Uniform* until the next successful link operation occurs on the program object, when they are once again initialized to 0.

func (*GL) Uniform3iv

func (gl *GL) Uniform3iv(location glbase.Uniform, value []int32)

Uniform3iv modifies the value of a uniform variable or a uniform variable array. The location of the uniform variable to be modified is specified by location, which should be a value returned by GetUniformLocation. Uniform3iv operates on the program object that was made part of current state by calling UseProgram.

The functions Uniform{1|2|3|4}{f|i|ui}v can be used to modify a single uniform variable or a uniform variable array. These functions receive a slice with the values to be loaded into a uniform variable or a uniform variable array. A slice with length 1 should be used if modifying the value of a single uniform variable, and a length of 1 or greater can be used to modify an entire array or part of an array. When loading n elements starting at an arbitrary position m in a uniform variable array, elements m + n - 1 in the array will be replaced with the new values. If m + n - 1 is larger than the size of the uniform variable array, values for all array elements beyond the end of the array will be ignored. The number specified in the name of the command indicates the number of components for each element in value, and it should match the number of components in the data type of the specified uniform variable (1 for float, int, bool; 2 for vec2, ivec2, bvec2, etc.). The data type specified in the name of the command must match the data type for the specified uniform variable as described for Uniform{1|2|3|4}{f|i|ui}.

Uniform1i and Uniform1iv are the only two functions that may be used to load uniform variables defined as sampler types. Loading samplers with any other function will result in a GL.INVALID_OPERATION error.

All active uniform variables defined in a program object are initialized to 0 when the program object is linked successfully. They retain the values assigned to them by a call to Uniform* until the next successful link operation occurs on the program object, when they are once again initialized to 0.

func (*GL) Uniform4f

func (gl *GL) Uniform4f(location glbase.Uniform, v0, v1, v2, v3 float32)

Uniform4f modifies the value of a single uniform variable. The location of the uniform variable to be modified is specified by location, which should be a value returned by GetUniformLocation. Uniform4f operates on the program object that was made part of current state by calling UseProgram.

The functions Uniform{1|2|3|4}{f|i|ui} are used to change the value of the uniform variable specified by location using the values passed as arguments. The number specified in the function should match the number of components in the data type of the specified uniform variable (1 for float, int, unsigned int, bool; 2 for vec2, ivec2, uvec2, bvec2, etc.). The suffix f indicates that floating-point values are being passed; the suffix i indicates that integer values are being passed; the suffix ui indicates that unsigned integer values are being passed, and this type should also match the data type of the specified uniform variable. The i variants of this function should be used to provide values for uniform variables defined as int, ivec2, ivec3, ivec4, or arrays of these. The ui variants of this function should be used to provide values for uniform variables defined as unsigned int, uvec2, uvec3, uvec4, or arrays of these. The f variants should be used to provide values for uniform variables of type float, vec2, vec3, vec4, or arrays of these. Either the i, ui or f variants may be used to provide values for uniform variables of type bool, bvec2, bvec3, bvec4, or arrays of these. The uniform variable will be set to false if the input value is 0 or 0.0f, and it will be set to true otherwise.

Uniform1i and Uniform1iv are the only two functions that may be used to load uniform variables defined as sampler types. Loading samplers with any other function will result in a GL.INVALID_OPERATION error.

All active uniform variables defined in a program object are initialized to 0 when the program object is linked successfully. They retain the values assigned to them by a call to Uniform* until the next successful link operation occurs on the program object, when they are once again initialized to 0.

func (*GL) Uniform4fv

func (gl *GL) Uniform4fv(location glbase.Uniform, value []float32)

Uniform4fv modifies the value of a uniform variable or a uniform variable array. The location of the uniform variable to be modified is specified by location, which should be a value returned by GetUniformLocation. Uniform4fv operates on the program object that was made part of current state by calling UseProgram.

The functions Uniform{1|2|3|4}{f|i|ui}v can be used to modify a single uniform variable or a uniform variable array. These functions receive a slice with the values to be loaded into a uniform variable or a uniform variable array. A slice with length 1 should be used if modifying the value of a single uniform variable, and a length of 1 or greater can be used to modify an entire array or part of an array. When loading n elements starting at an arbitrary position m in a uniform variable array, elements m + n - 1 in the array will be replaced with the new values. If m + n - 1 is larger than the size of the uniform variable array, values for all array elements beyond the end of the array will be ignored. The number specified in the name of the command indicates the number of components for each element in value, and it should match the number of components in the data type of the specified uniform variable (1 for float, int, bool; 2 for vec2, ivec2, bvec2, etc.). The data type specified in the name of the command must match the data type for the specified uniform variable as described for Uniform{1|2|3|4}{f|i|ui}.

Uniform1i and Uniform1iv are the only two functions that may be used to load uniform variables defined as sampler types. Loading samplers with any other function will result in a GL.INVALID_OPERATION error.

All active uniform variables defined in a program object are initialized to 0 when the program object is linked successfully. They retain the values assigned to them by a call to Uniform* until the next successful link operation occurs on the program object, when they are once again initialized to 0.

func (*GL) Uniform4i

func (gl *GL) Uniform4i(location glbase.Uniform, v0, v1, v2, v3 int32)

Uniform4i modifies the value of a single uniform variable. The location of the uniform variable to be modified is specified by location, which should be a value returned by GetUniformLocation. Uniform4i operates on the program object that was made part of current state by calling UseProgram.

The functions Uniform{1|2|3|4}{f|i|ui} are used to change the value of the uniform variable specified by location using the values passed as arguments. The number specified in the function should match the number of components in the data type of the specified uniform variable (1 for float, int, unsigned int, bool; 2 for vec2, ivec2, uvec2, bvec2, etc.). The suffix f indicates that floating-point values are being passed; the suffix i indicates that integer values are being passed; the suffix ui indicates that unsigned integer values are being passed, and this type should also match the data type of the specified uniform variable. The i variants of this function should be used to provide values for uniform variables defined as int, ivec2, ivec3, ivec4, or arrays of these. The ui variants of this function should be used to provide values for uniform variables defined as unsigned int, uvec2, uvec3, uvec4, or arrays of these. The f variants should be used to provide values for uniform variables of type float, vec2, vec3, vec4, or arrays of these. Either the i, ui or f variants may be used to provide values for uniform variables of type bool, bvec2, bvec3, bvec4, or arrays of these. The uniform variable will be set to false if the input value is 0 or 0.0f, and it will be set to true otherwise.

Uniform1i and Uniform1iv are the only two functions that may be used to load uniform variables defined as sampler types. Loading samplers with any other function will result in a GL.INVALID_OPERATION error.

All active uniform variables defined in a program object are initialized to 0 when the program object is linked successfully. They retain the values assigned to them by a call to Uniform* until the next successful link operation occurs on the program object, when they are once again initialized to 0.

func (*GL) Uniform4iv

func (gl *GL) Uniform4iv(location glbase.Uniform, value []int32)

Uniform4iv modifies the value of a uniform variable or a uniform variable array. The location of the uniform variable to be modified is specified by location, which should be a value returned by GetUniformLocation. Uniform4iv operates on the program object that was made part of current state by calling UseProgram.

The functions Uniform{1|2|3|4}{f|i|ui}v can be used to modify a single uniform variable or a uniform variable array. These functions receive a slice with the values to be loaded into a uniform variable or a uniform variable array. A slice with length 1 should be used if modifying the value of a single uniform variable, and a length of 1 or greater can be used to modify an entire array or part of an array. When loading n elements starting at an arbitrary position m in a uniform variable array, elements m + n - 1 in the array will be replaced with the new values. If m + n - 1 is larger than the size of the uniform variable array, values for all array elements beyond the end of the array will be ignored. The number specified in the name of the command indicates the number of components for each element in value, and it should match the number of components in the data type of the specified uniform variable (1 for float, int, bool; 2 for vec2, ivec2, bvec2, etc.). The data type specified in the name of the command must match the data type for the specified uniform variable as described for Uniform{1|2|3|4}{f|i|ui}.

Uniform1i and Uniform1iv are the only two functions that may be used to load uniform variables defined as sampler types. Loading samplers with any other function will result in a GL.INVALID_OPERATION error.

All active uniform variables defined in a program object are initialized to 0 when the program object is linked successfully. They retain the values assigned to them by a call to Uniform* until the next successful link operation occurs on the program object, when they are once again initialized to 0.

func (*GL) UniformMatrix2fv

func (gl *GL) UniformMatrix2fv(location glbase.Uniform, transpose bool, value []float32)

UniformMatrix2fv modifies the value of a uniform variable or a uniform variable array. The location of the uniform variable to be modified is specified by location, which should be a value returned by GetUniformLocation. UniformMatrix2fv operates on the program object that was made part of current state by calling UseProgram.

The functions UniformMatrix{2|3|4|2x3|3x2|2x4|4x2|3x4|4x3}fv are used to modify a matrix or an array of matrices. The numbers in the function name are interpreted as the dimensionality of the matrix. The number 2 indicates a 2x2 matrix (4 values), the number 3 indicates a 3x3 matrix (9 values), and the number 4 indicates a 4x4 matrix (16 values). Non-square matrix dimensionality is explicit, with the first number representing the number of columns and the second number representing the number of rows. For example, 2x4 indicates a 2x4 matrix with 2 columns and 4 rows (8 values). The length of the provided slice must be a multiple of the number of values per matrix, to update one or more consecutive matrices.

If transpose is false, each matrix is assumed to be supplied in column major order. If transpose is true, each matrix is assumed to be supplied in row major order.

All active uniform variables defined in a program object are initialized to 0 when the program object is linked successfully. They retain the values assigned to them by a call to Uniform* until the next successful link operation occurs on the program object, when they are once again initialized to 0.

func (*GL) UniformMatrix3fv

func (gl *GL) UniformMatrix3fv(location glbase.Uniform, transpose bool, value []float32)

UniformMatrix3fv modifies the value of a uniform variable or a uniform variable array. The location of the uniform variable to be modified is specified by location, which should be a value returned by GetUniformLocation. UniformMatrix3fv operates on the program object that was made part of current state by calling UseProgram.

The functions UniformMatrix{2|3|4|2x3|3x2|2x4|4x2|3x4|4x3}fv are used to modify a matrix or an array of matrices. The numbers in the function name are interpreted as the dimensionality of the matrix. The number 2 indicates a 2x2 matrix (4 values), the number 3 indicates a 3x3 matrix (9 values), and the number 4 indicates a 4x4 matrix (16 values). Non-square matrix dimensionality is explicit, with the first number representing the number of columns and the second number representing the number of rows. For example, 2x4 indicates a 2x4 matrix with 2 columns and 4 rows (8 values). The length of the provided slice must be a multiple of the number of values per matrix, to update one or more consecutive matrices.

If transpose is false, each matrix is assumed to be supplied in column major order. If transpose is true, each matrix is assumed to be supplied in row major order.

All active uniform variables defined in a program object are initialized to 0 when the program object is linked successfully. They retain the values assigned to them by a call to Uniform* until the next successful link operation occurs on the program object, when they are once again initialized to 0.

func (*GL) UniformMatrix4fv

func (gl *GL) UniformMatrix4fv(location glbase.Uniform, transpose bool, value []float32)

UniformMatrix4fv modifies the value of a uniform variable or a uniform variable array. The location of the uniform variable to be modified is specified by location, which should be a value returned by GetUniformLocation. UniformMatrix4fv operates on the program object that was made part of current state by calling UseProgram.

The functions UniformMatrix{2|3|4|2x3|3x2|2x4|4x2|3x4|4x3}fv are used to modify a matrix or an array of matrices. The numbers in the function name are interpreted as the dimensionality of the matrix. The number 2 indicates a 2x2 matrix (4 values), the number 3 indicates a 3x3 matrix (9 values), and the number 4 indicates a 4x4 matrix (16 values). Non-square matrix dimensionality is explicit, with the first number representing the number of columns and the second number representing the number of rows. For example, 2x4 indicates a 2x4 matrix with 2 columns and 4 rows (8 values). The length of the provided slice must be a multiple of the number of values per matrix, to update one or more consecutive matrices.

If transpose is false, each matrix is assumed to be supplied in column major order. If transpose is true, each matrix is assumed to be supplied in row major order.

All active uniform variables defined in a program object are initialized to 0 when the program object is linked successfully. They retain the values assigned to them by a call to Uniform* until the next successful link operation occurs on the program object, when they are once again initialized to 0.

func (*GL) UseProgram

func (gl *GL) UseProgram(program glbase.Program)

UseProgram installs the program object specified by program as part of current rendering state. One or more executables are created in a program object by successfully attaching shader objects to it with AttachShader, successfully compiling the shader objects with CompileShader, and successfully linking the program object with LinkProgram.

A program object will contain an executable that will run on the vertex processor if it contains one or more shader objects of type GL.VERTEX_SHADER that have been successfully compiled and linked. Similarly, a program object will contain an executable that will run on the fragment processor if it contains one or more shader objects of type GL.FRAGMENT_SHADER that have been successfully compiled and linked.

Successfully installing an executable on a programmable processor will cause the corresponding fixed functionality of OpenGL to be disabled. Specifically, if an executable is installed on the vertex processor, the OpenGL fixed functionality will be disabled as follows.

  • The modelview matrix is not applied to vertex coordinates.

  • The projection matrix is not applied to vertex coordinates.

  • The texture matrices are not applied to texture coordinates.

  • Normals are not transformed to eye coordinates.

  • Normals are not rescaled or normalized.

  • Normalization of GL.AUTO_NORMAL evaluated normals is not performed.

  • Texture coordinates are not generated automatically.

  • Per-vertex lighting is not performed.

  • Color material computations are not performed.

  • Color index lighting is not performed.

  • This list also applies when setting the current raster position.

The executable that is installed on the vertex processor is expected to implement any or all of the desired functionality from the preceding list. Similarly, if an executable is installed on the fragment processor, the OpenGL fixed functionality will be disabled as follows.

  • Texture environment and texture functions are not applied.

  • Texture application is not applied.

  • Color sum is not applied.

  • Fog is not applied.

Again, the fragment shader that is installed is expected to implement any or all of the desired functionality from the preceding list.

While a program object is in use, applications are free to modify attached shader objects, compile attached shader objects, attach additional shader objects, and detach or delete shader objects. None of these operations will affect the executables that are part of the current state. However, relinking the program object that is currently in use will install the program object as part of the current rendering state if the link operation was successful (see LinkProgram). If the program object currently in use is relinked unsuccessfully, its link status will be set to GL.FALSE, but the executables and associated state will remain part of the current state until a subsequent call to UseProgram removes it from use. After it is removed from use, it cannot be made part of current state until it has been successfully relinked.

If program contains shader objects of type GL.VERTEX_SHADER but it does not contain shader objects of type GL.FRAGMENT_SHADER, an executable will be installed on the vertex processor, but fixed functionality will be used for fragment processing. Similarly, if program contains shader objects of type GL.FRAGMENT_SHADER but it does not contain shader objects of type GL.VERTEX_SHADER, an executable will be installed on the fragment processor, but fixed functionality will be used for vertex processing. If program is 0, the programmable processors will be disabled, and fixed functionality will be used for both vertex and fragment processing.

While a program object is in use, the state that controls the disabled fixed functionality may also be updated using the normal OpenGL calls.

Like display lists and texture objects, the name space for program objects may be shared across a set of contexts, as long as the server sides of the contexts share the same address space. If the name space is shared across contexts, any attached objects and the data associated with those attached objects are shared as well.

Applications are responsible for providing the synchronization across API calls when objects are accessed from different execution threads.

Error GL.INVALID_VALUE is generated if program is neither 0 nor a value generated by OpenGL. GL.INVALID_OPERATION is generated if program is not a program object. GL.INVALID_OPERATION is generated if program could not be made part of current state. GL.INVALID_OPERATION is generated if UseProgram is executed between the execution of Begin and the corresponding execution of End.

UseProgram is available in GL version 2.0 or greater.

func (*GL) VertexAttribPointer

func (gl *GL) VertexAttribPointer(index glbase.Attrib, size int, gltype glbase.Enum, normalized bool, stride int, offset uintptr)

VertexAttribPointer specifies the location and data format of the array of generic vertex attributes at index to use when rendering. size specifies the number of components per attribute and must be 1, 2, 3, or 4. type specifies the data type of each component, and stride specifies the byte stride from one attribute to the next, allowing vertices and attributes to be packed into a single array or stored in separate arrays. normalized indicates whether the values stored in an integer format are to be mapped to the range [-1,1] (for signed values) or [0,1] (for unsigned values) when they are accessed and converted to floating point; otherwise, values will be converted to floats directly without normalization. offset is a byte offset into the buffer object's data store, which must be bound to the GL.ARRAY_BUFFER target with BindBuffer.

The buffer object binding (GL.ARRAY_BUFFER_BINDING) is saved as generic vertex attribute array client-side state (GL.VERTEX_ATTRIB_ARRAY_BUFFER_BINDING) for the provided index.

To enable and disable a generic vertex attribute array, call EnableVertexAttribArray and DisableVertexAttribArray with index. If enabled, the generic vertex attribute array is used when DrawArrays or DrawElements is called. Each generic vertex attribute array is initially disabled.

VertexAttribPointer is typically implemented on the client side.

Error GL.INVALID_ENUM is generated if type is not an accepted value. GL.INVALID_VALUE is generated if index is greater than or equal to GL.MAX_VERTEX_ATTRIBS. GL.INVALID_VALUE is generated if size is not 1, 2, 3, or 4. GL.INVALID_VALUE is generated if stride is negative.

func (*GL) Viewport

func (gl *GL) Viewport(x, y, width, height int)

https://www.opengl.org/sdk/docs/man2/xhtml/glViewport.xml

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL