jsonrpc2

package
v0.1.12 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Jul 27, 2022 License: BSD-3-Clause Imports: 16 Imported by: 0

Documentation

Overview

Package jsonrpc2 is a minimal implementation of the JSON RPC 2 spec. https://www.jsonrpc.org/specification It is intended to be compatible with other implementations at the wire level.

Index

Constants

View Source
const (
	// ErrIdleTimeout is returned when serving timed out waiting for new connections.
	ErrIdleTimeout = constError("timed out waiting for new connections")
)

Variables

View Source
var (
	// ErrUnknown should be used for all non coded errors.
	ErrUnknown = NewError(-32001, "JSON RPC unknown error")
	// ErrParse is used when invalid JSON was received by the server.
	ErrParse = NewError(-32700, "JSON RPC parse error")
	//ErrInvalidRequest is used when the JSON sent is not a valid Request object.
	ErrInvalidRequest = NewError(-32600, "JSON RPC invalid request")
	// ErrMethodNotFound should be returned by the handler when the method does
	// not exist / is not available.
	ErrMethodNotFound = NewError(-32601, "JSON RPC method not found")
	// ErrInvalidParams should be returned by the handler when method
	// parameter(s) were invalid.
	ErrInvalidParams = NewError(-32602, "JSON RPC invalid params")
	// ErrInternal is not currently returned but defined for completeness.
	ErrInternal = NewError(-32603, "JSON RPC internal error")

	//ErrServerOverloaded is returned when a message was refused due to a
	//server being temporarily unable to accept any new messages.
	ErrServerOverloaded = NewError(-32000, "JSON RPC overloaded")
)

Functions

func ListenAndServe

func ListenAndServe(ctx context.Context, network, addr string, server StreamServer, idleTimeout time.Duration) error

ListenAndServe starts an jsonrpc2 server on the given address. If idleTimeout is non-zero, ListenAndServe exits after there are no clients for this duration, otherwise it exits only on error.

func MethodNotFound

func MethodNotFound(ctx context.Context, reply Replier, req Request) error

MethodNotFound is a Handler that replies to all call requests with the standard method not found response. This should normally be the final handler in a chain.

func NewError

func NewError(code int64, message string) error

func Serve

func Serve(ctx context.Context, ln net.Listener, server StreamServer, idleTimeout time.Duration) error

Serve accepts incoming connections from the network, and handles them using the provided server. If idleTimeout is non-zero, ListenAndServe exits after there are no clients for this duration, otherwise it exits only on error.

Types

type Call

type Call struct {
	// contains filtered or unexported fields
}

Call is a request that expects a response. The response will have a matching ID.

func NewCall

func NewCall(id ID, method string, params interface{}) (*Call, error)

NewCall constructs a new Call message for the supplied ID, method and parameters.

func (*Call) ID

func (msg *Call) ID() ID

func (*Call) MarshalJSON

func (c *Call) MarshalJSON() ([]byte, error)

func (*Call) Method

func (msg *Call) Method() string

func (*Call) Params

func (msg *Call) Params() json.RawMessage

func (*Call) UnmarshalJSON

func (c *Call) UnmarshalJSON(data []byte) error

type Conn

type Conn interface {
	// Call invokes the target method and waits for a response.
	// The params will be marshaled to JSON before sending over the wire, and will
	// be handed to the method invoked.
	// The response will be unmarshaled from JSON into the result.
	// The id returned will be unique from this connection, and can be used for
	// logging or tracking.
	Call(ctx context.Context, method string, params, result interface{}) (ID, error)

	// Notify invokes the target method but does not wait for a response.
	// The params will be marshaled to JSON before sending over the wire, and will
	// be handed to the method invoked.
	Notify(ctx context.Context, method string, params interface{}) error

	// Go starts a goroutine to handle the connection.
	// It must be called exactly once for each Conn.
	// It returns immediately.
	// You must block on Done() to wait for the connection to shut down.
	// This is a temporary measure, this should be started automatically in the
	// future.
	Go(ctx context.Context, handler Handler)

	// Close closes the connection and it's underlying stream.
	// It does not wait for the close to complete, use the Done() channel for
	// that.
	Close() error

	// Done returns a channel that will be closed when the processing goroutine
	// has terminated, which will happen if Close() is called or an underlying
	// stream is closed.
	Done() <-chan struct{}

	// Err returns an error if there was one from within the processing goroutine.
	// If err returns non nil, the connection will be already closed or closing.
	Err() error
}

Conn is the common interface to jsonrpc clients and servers. Conn is bidirectional; it does not have a designated server or client end. It manages the jsonrpc2 protocol, connecting responses back to their calls.

func NewConn

func NewConn(s Stream) Conn

NewConn creates a new connection object around the supplied stream.

type Framer

type Framer func(conn net.Conn) Stream

Framer wraps a network connection up into a Stream. It is responsible for the framing and encoding of messages into wire form. NewRawStream and NewHeaderStream are implementations of a Framer.

type Handler

type Handler func(ctx context.Context, reply Replier, req Request) error

Handler is invoked to handle incoming requests. The Replier sends a reply to the request and must be called exactly once.

func AsyncHandler

func AsyncHandler(handler Handler) Handler

AsyncHandler returns a handler that processes each request goes in its own goroutine. The handler returns immediately, without the request being processed. Each request then waits for the previous request to finish before it starts. This allows the stream to unblock at the cost of unbounded goroutines all stalled on the previous one.

func CancelHandler

func CancelHandler(handler Handler) (Handler, func(id ID))

CancelHandler returns a handler that supports cancellation, and a function that can be used to trigger canceling in progress requests.

func MustReplyHandler

func MustReplyHandler(handler Handler) Handler

MustReplyHandler creates a Handler that panics if the wrapped handler does not call Reply for every request that it is passed.

type ID

type ID struct {
	// contains filtered or unexported fields
}

ID is a Request identifier.

func NewIntID

func NewIntID(v int64) ID

NewIntID returns a new numerical request ID.

func NewStringID

func NewStringID(v string) ID

NewStringID returns a new string request ID.

func (ID) Format

func (id ID) Format(f fmt.State, r rune)

Format writes the ID to the formatter. If the rune is q the representation is non ambiguous, string forms are quoted, number forms are preceded by a #

func (*ID) MarshalJSON

func (id *ID) MarshalJSON() ([]byte, error)

func (*ID) UnmarshalJSON

func (id *ID) UnmarshalJSON(data []byte) error

type Message

type Message interface {
	// contains filtered or unexported methods
}

Message is the interface to all jsonrpc2 message types. They share no common functionality, but are a closed set of concrete types that are allowed to implement this interface. The message types are *Call, *Notification and *Response.

func DecodeMessage

func DecodeMessage(data []byte) (Message, error)

type Notification

type Notification struct {
	// contains filtered or unexported fields
}

Notification is a request for which a response cannot occur, and as such it has not ID.

func NewNotification

func NewNotification(method string, params interface{}) (*Notification, error)

NewNotification constructs a new Notification message for the supplied method and parameters.

func (*Notification) MarshalJSON

func (n *Notification) MarshalJSON() ([]byte, error)

func (*Notification) Method

func (msg *Notification) Method() string

func (*Notification) Params

func (msg *Notification) Params() json.RawMessage

func (*Notification) UnmarshalJSON

func (n *Notification) UnmarshalJSON(data []byte) error

type Replier

type Replier func(ctx context.Context, result interface{}, err error) error

Replier is passed to handlers to allow them to reply to the request. If err is set then result will be ignored.

type Request

type Request interface {
	Message
	// Method is a string containing the method name to invoke.
	Method() string
	// Params is either a struct or an array with the parameters of the method.
	Params() json.RawMessage
	// contains filtered or unexported methods
}

Request is the shared interface to jsonrpc2 messages that request a method be invoked. The request types are a closed set of *Call and *Notification.

type Response

type Response struct {
	// contains filtered or unexported fields
}

Response is a reply to a Call. It will have the same ID as the call it is a response to.

func NewResponse

func NewResponse(id ID, result interface{}, err error) (*Response, error)

NewResponse constructs a new Response message that is a reply to the supplied. If err is set result may be ignored.

func (*Response) Err

func (msg *Response) Err() error

func (*Response) ID

func (msg *Response) ID() ID

func (*Response) MarshalJSON

func (r *Response) MarshalJSON() ([]byte, error)

func (*Response) Result

func (msg *Response) Result() json.RawMessage

func (*Response) UnmarshalJSON

func (r *Response) UnmarshalJSON(data []byte) error

type ServerFunc

type ServerFunc func(context.Context, Conn) error

The ServerFunc type is an adapter that implements the StreamServer interface using an ordinary function.

func (ServerFunc) ServeStream

func (f ServerFunc) ServeStream(ctx context.Context, c Conn) error

ServeStream calls f(ctx, s).

type Stream

type Stream interface {
	// Read gets the next message from the stream.
	Read(context.Context) (Message, int64, error)
	// Write sends a message to the stream.
	Write(context.Context, Message) (int64, error)
	// Close closes the connection.
	// Any blocked Read or Write operations will be unblocked and return errors.
	Close() error
}

Stream abstracts the transport mechanics from the JSON RPC protocol. A Conn reads and writes messages using the stream it was provided on construction, and assumes that each call to Read or Write fully transfers a single message, or returns an error. A stream is not safe for concurrent use, it is expected it will be used by a single Conn in a safe manner.

func NewHeaderStream

func NewHeaderStream(conn net.Conn) Stream

NewHeaderStream returns a Stream built on top of a net.Conn. The messages are sent with HTTP content length and MIME type headers. This is the format used by LSP and others.

func NewRawStream

func NewRawStream(conn net.Conn) Stream

NewRawStream returns a Stream built on top of a net.Conn. The messages are sent with no wrapping, and rely on json decode consistency to determine message boundaries.

type StreamServer

type StreamServer interface {
	ServeStream(context.Context, Conn) error
}

A StreamServer is used to serve incoming jsonrpc2 clients communicating over a newly created connection.

func HandlerServer

func HandlerServer(h Handler) StreamServer

HandlerServer returns a StreamServer that handles incoming streams using the provided handler.

Directories

Path Synopsis
Package servertest provides utilities for running tests against a remote LSP server.
Package servertest provides utilities for running tests against a remote LSP server.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL