images/

directory
v1.19.14 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Aug 11, 2021 License: Apache-2.0

README

Kubernetes test images

Overview

All the images found here are used in Kubernetes tests that ensure its features and functionality. The images are built and published as manifest lists, allowing multiarch and cross platform support.

This guide will provide information on how to: make changes to images, bump their version, build the new images, test the changes made, promote the newly built staging images.

Prerequisites

In order to build the docker test images, a Linux node is required. The node will require make and docker (version 18.06.0 or newer). Manifest lists were introduced in 18.03.0, but 18.06.0 is recommended in order to avoid certain issues.

The node must be able to push the images to the desired container registry, make sure you are authenticated with the registry you're pushing to.

Windows Container images are not built by default, since they cannot be built on Linux. For that, a Windows node with Docker installed and configured for remote management is required.

Windows node(s) setup

In order to build the Windows container images, a node with Windows 10 or Windows Server 2019 with the latest updates installed is required. The node will have to have Docker installed, preferably version 18.06.0 or newer.

Keep in mind that the Windows node might not be able to build container images for newer OS versions than itself (even with --isolation=hyperv), so keeping the node up to date and / or upgrading it to the latest Windows Server edition is ideal.

Windows test images must be built for Windows Server 2019 (1809) and Windows Server 1903, thus, if the node does not have Hyper-V enabled, or it is not supported, multiple Windows nodes are required, one per OS version.

Additionally, remote management must be configured for the node's Docker daemon. Exposing the Docker daemon without requiring any authentication is not recommended, and thus, it must be configured with TLS to ensure that only authorised people can interact with it. For this, the following powershell script can be executed:

mkdir .docker
docker run --isolation=hyperv --user=ContainerAdministrator --rm `
  -e SERVER_NAME=$(hostname) `
  -e IP_ADDRESSES=127.0.0.1,YOUR_WINDOWS_BUILD_NODE_IP `
  -v "c:\programdata\docker:c:\programdata\docker" `
  -v "$env:USERPROFILE\.docker:c:\users\containeradministrator\.docker" stefanscherer/dockertls-windows:2.5.5
# restart the Docker daemon.
Restart-Service docker

For more information about the above commands, you can check here.

A firewall rule to allow connections to the Docker daemon is necessary:

New-NetFirewallRule -DisplayName 'Docker SSL Inbound' -Profile @('Domain', 'Public', 'Private') -Direction Inbound -Action Allow -Protocol TCP -LocalPort 2376

If your Windows build node is hosted by a cloud provider, make sure the port 2376 is open for the node. For example, in Azure, this is done by running the following command:

az vm open-port -g GROUP-NAME -n NODE-NAME --port 2376

The ca.pem, cert.pem, and key.pem files that can be found in $env:USERPROFILE\.docker will have to copied to the ~/.docker-${os_version)/ on the Linux build node, where ${os_version} is 1809 or 1903.

scp.exe -r $env:USERPROFILE\.docker ubuntu@YOUR_LINUX_BUILD_NODE:/home/ubuntu/.docker-$os_version

After all this, the Linux build node should be able to connect to the Windows build node:

docker --tlsverify --tlscacert ~/.docker-${os_version}/ca.pem --tlscert ~/.docker-${os_version}/cert.pem --tlskey ~/.docker-${os_version}/key.pem -H "$REMOTE_DOCKER_URL" version

For more information and troubleshooting about enabling Docker remote management, see here

Finally, the node must be able to push the images to the desired container registry, make sure you are authenticated with the registry you're pushing to.

Making changes to images

There are several thousands of tests in Kubernetes E2E testing. Not all of them are being run on new PRs, and thus, not all images are used, especially those that are not used by Conformance tests.

So, in order to prevent regressions in the images and failing jobs, any changes made to the image itself or its binaries will require the image's version to be bumped. In the case of a regression which cannot be immediately resolved, the image version used in E2E tests will be reverted to the last known stable version.

The version can easily be bumped by modifying the file test/images/${IMAGE_NAME}/VERSION, which will be used when building the image. Additionally, for the agnhost image, also bump the Version in test/images/agnhost/agnhost.go.

The typical image used in E2E testing is the agnhost image. It contains several subcommands with different functionalities, used to validate different Kubernetes behaviours. If a new functionality needs testing, consider adding an agnhost subcommand for it first, before creating an entirely separate test image.

Some test images (agnhost) are used as bases for other images (kitten, nautilus). If the parent image's VERSION has been bumped, also bump the version in the children's BASEIMAGE files in order for base image changes to be reflected in the child images as well.

Keep in mind that the Kubernetes CI will not run with the image changes you've made. It is a good idea to build the image and push it to your own registry first, and run some tests that are using that image. For these steps, see the sections below.

After the desired changes have been made, the affected images will have to be built and published, and then tested. After the pull request with those changes has been approved, the new images will be built and published to the gcr.io/kubernetes-e2e-test-images registry as well.

Currently, the image building process has been automated with the Image Promoter, but only for the Conformance images (agnhost, jessie-dnsutils, kitten, nautilus, nonewprivs, resource-consumer, sample-apiserver). After the pull request merges, a postsubmit job will be started with the new changes, which can be tracked here. After it passes successfully, the new image will reside in the gcr.io/k8s-staging-e2e-test-images/${IMAGE_NAME}:${VERSION} registry, from which it will have to be promoted by adding a line for it here. For this, you will need the image manifest list's digest, which can be obtained by running:

manifest-tool inspect --raw gcr.io/k8s-staging-e2e-test-images/${IMAGE_NAME}:${VERSION} | jq '.[0].Digest'

The images are built through make. Since some images (e.g.: busybox) are used as a base for other images, it is recommended to build them first, if needed.

Building images

The images are built through make. Since some images (agnhost) are used as a base for other images, it is recommended to build them first, if needed.

An image can be built by simply running the command:

make all WHAT=agnhost

To build AND push an image, the following command can be used:

make all-push WHAT=agnhost

By default, the images will be tagged and pushed under the gcr.io/kubernetes-e2e-test-images registry. That can changed by running this command instead:

REGISTRY=foo_registry make all-push WHAT=agnhost

In order to also include Windows Container images into the final manifest lists, the REMOTE_DOCKER_URL argument in the form tcp://[host]:[port][path] (for more details, see here) will also have to be specified:

REMOTE_DOCKER_URL_1909=remote_docker_url_1909 REMOTE_DOCKER_URL_1903=remote_docker_url_1903 REMOTE_DOCKER_URL_1809=remote_docker_url_1809 REGISTRY=foo_registry make all-push WHAT=test-webserver

NOTE (for test gcr.io image publishers): Some tests (e.g.: should serve a basic image on each replica with a private image) require the agnhost image to be published in an authenticated repo as well:

REGISTRY=gcr.io/kubernetes-e2e-test-images make all-push WHAT=agnhost
REGISTRY=gcr.io/k8s-authenticated-test make all-push WHAT=agnhost

Testing the new image

Once the image has been built and pushed to an accesible registry, you can run the tests using that image by having the environment variable KUBE_TEST_REPO_LIST set before running the tests that are using the image:

export KUBE_TEST_REPO_LIST=/path/to/repo_list.yaml

repo_list.yaml is a configuration file used by the E2E tests, in which you can set alternative registries to pull the images from. Sample file:

dockerLibraryRegistry: your-awesome-registry
e2eRegistry: your-awesome-registry
gcRegistry: your-awesome-registry
sampleRegistry: your-awesome-registry

Keep in mind that some tests are using multiple images, so it is a good idea to also build and push those images.

Finally, make sure to bump the image version used in E2E testing by modifying the file test/utils/image/manifest.go, and recompile afterwards:

./build/run.sh make WHAT=test/e2e/e2e.test

After all the above has been done, run the desired tests.

Known issues and workarounds

docker manifest create fails due to permission denied on /etc/docker/certs.d/gcr.io (https://github.com/docker/for-linux/issues/396). This issue can be resolved by running:

sudo chmod o+x /etc/docker

nc is being used by some E2E tests, which is why we are including a Linux-like nc.exe into the Windows busybox image. The image could fail to build during that step with an error that looks like this:

re-exec error: exit status 1: output: time="..." level=error msg="hcsshim::ImportLayer failed in Win32: The system cannot find the path specified. (0x3) path=\\\\?\\C:\\ProgramData\\...

The issue is caused by the Windows Defender which is removing the nc.exe binary from the filesystem. For more details on this issue, see here. To fix this, you can simply run the following powershell command to temporarily disable Windows Defender:

Set-MpPreference -DisableRealtimeMonitoring $true

Directories

Path Synopsis
dns
net
openidmetadata
Package openidmetadata tests the OIDC discovery endpoints which are part of the ServiceAccountIssuerDiscovery feature.
Package openidmetadata tests the OIDC discovery endpoints which are part of the ServiceAccountIssuerDiscovery feature.
test-webserver
Package testwebserver offers a tiny web server that serves a static file.
Package testwebserver offers a tiny web server that serves a static file.
pets
peer-finder
A small utility program to lookup hostnames of endpoints in a service.
A small utility program to lookup hostnames of endpoints in a service.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL