const (
	// MaxPodTerminationMessageLogLength is the maximum bytes any one pod may have written
	// as termination message output across all containers. Containers will be evenly truncated
	// until output is below this limit.
	MaxPodTerminationMessageLogLength = 1024 * 12
	// MaxContainerTerminationMessageLength is the upper bound any one container may write to
	// its termination message path. Contents above this length will be truncated.
	MaxContainerTerminationMessageLength = 1024 * 4
	// MaxContainerTerminationMessageLogLength is the maximum bytes any one container will
	// have written to its termination message when the message is read from the logs.
	MaxContainerTerminationMessageLogLength = 1024 * 2
	// MaxContainerTerminationMessageLogLines is the maximum number of previous lines of
	// log output that the termination message can contain.
	MaxContainerTerminationMessageLogLines = 80


var (
	// ErrRunContainer returned when runtime failed to start any of pod's container.
	ErrRunContainer = errors.New("RunContainerError")
	// ErrKillContainer returned when runtime failed to kill any of pod's containers.
	ErrKillContainer = errors.New("KillContainerError")
	// ErrCreatePodSandbox returned when runtime failed to create a sandbox for pod.
	ErrCreatePodSandbox = errors.New("CreatePodSandboxError")
	// ErrConfigPodSandbox returned when runetime failed to get pod sandbox config from pod.
	ErrConfigPodSandbox = errors.New("ConfigPodSandboxError")
	// ErrKillPodSandbox returned when runtime failed to stop pod's sandbox.
	ErrKillPodSandbox = errors.New("KillPodSandboxError")

var (
	// ErrContainerNotFound returned when a container in the given pod with the
	// given container name was not found, amongst those managed by the kubelet.
	ErrContainerNotFound = errors.New("no matching container")

var ErrCrashLoopBackOff = errors.New("CrashLoopBackOff")

ErrCrashLoopBackOff returned when a container Terminated and Kubelet is backing off the restart.

var ImplicitContainerPrefix = "implicitly required container "

ImplicitContainerPrefix is a container name prefix that will indicate that container was started implicitly (like the pod infra container).


func BuildPodFullName

func BuildPodFullName(name, namespace string) string

BuildPodFullName builds the pod full name from pod name and namespace.

func ExpandContainerCommandAndArgs

func ExpandContainerCommandAndArgs(container *v1.Container, envs []EnvVar) (command []string, args []string)

ExpandContainerCommandAndArgs expands the given Container's command by replacing variable references `with the values of given EnvVar.

func ExpandContainerCommandOnlyStatic

func ExpandContainerCommandOnlyStatic(containerCommand []string, envs []v1.EnvVar) (command []string)

ExpandContainerCommandOnlyStatic substitutes only static environment variable values from the container environment definitions. This does *not* include valueFrom substitutions. TODO: callers should use ExpandContainerCommandAndArgs with a fully resolved list of environment.

func ExpandContainerVolumeMounts

func ExpandContainerVolumeMounts(mount v1.VolumeMount, envs []EnvVar) (string, error)

ExpandContainerVolumeMounts expands the subpath of the given VolumeMount by replacing variable references with the values of given EnvVar.

func FilterEventRecorder

func FilterEventRecorder(recorder record.EventRecorder) record.EventRecorder

FilterEventRecorder creates an event recorder to record object's event except implicitly required container's, like infra container.

func FormatPod

func FormatPod(pod *Pod) string

FormatPod returns a string representing a pod in a human readable format, with pod UID as part of the string.

func GenerateContainerRef

func GenerateContainerRef(pod *v1.Pod, container *v1.Container) (*v1.ObjectReference, error)

GenerateContainerRef returns an *v1.ObjectReference which references the given container within the given pod. Returns an error if the reference can't be constructed or the container doesn't actually belong to the pod.

This function will return an error if the provided Pod does not have a selfLink, but we expect selfLink to be populated at all call sites for the function.

func GetContainerSpec

func GetContainerSpec(pod *v1.Pod, containerName string) *v1.Container

GetContainerSpec gets the container spec by containerName.

func GetPodFullName

func GetPodFullName(pod *v1.Pod) string

GetPodFullName returns a name that uniquely identifies a pod.

func HandleResizing

func HandleResizing(resize <-chan remotecommand.TerminalSize, resizeFunc func(size remotecommand.TerminalSize))

HandleResizing spawns a goroutine that processes the resize channel, calling resizeFunc for each remotecommand.TerminalSize received from the channel. The resize channel must be closed elsewhere to stop the goroutine.

func HasPrivilegedContainer

func HasPrivilegedContainer(pod *v1.Pod) bool

HasPrivilegedContainer returns true if any of the containers in the pod are privileged.

func HashContainer

func HashContainer(container *v1.Container) uint64

HashContainer returns the hash of the container. It is used to compare the running container with its desired spec. Note: remember to update hashValues in container_hash_test.go as well.

func IsHostNetworkPod

func IsHostNetworkPod(pod *v1.Pod) bool

IsHostNetworkPod returns whether the host networking requested for the given Pod. Pod must not be nil.

func ParsePodFullName

func ParsePodFullName(podFullName string) (string, string, error)

ParsePodFullName parsed the pod full name.

func ShouldContainerBeRestarted

func ShouldContainerBeRestarted(container *v1.Container, pod *v1.Pod, podStatus *PodStatus) bool

ShouldContainerBeRestarted checks whether a container needs to be restarted. TODO(yifan): Think about how to refactor this.


type Annotation

type Annotation struct {
	Name  string
	Value string

Annotation represents an annotation.

type Attacher

type Attacher interface {
	AttachContainer(id ContainerID, stdin io.Reader, stdout, stderr io.WriteCloser, tty bool, resize <-chan remotecommand.TerminalSize) (err error)

Attacher interface allows to attach a container.

type Cache

type Cache interface {
	Get(types.UID) (*PodStatus, error)
	Set(types.UID, *PodStatus, error, time.Time)
	// GetNewerThan is a blocking call that only returns the status
	// when it is newer than the given time.
	GetNewerThan(types.UID, time.Time) (*PodStatus, error)

Cache stores the PodStatus for the pods. It represents *all* the visible pods/containers in the container runtime. All cache entries are at least as new or newer than the global timestamp (set by UpdateTime()), while individual entries may be slightly newer than the global timestamp. If a pod has no states known by the runtime, Cache returns an empty PodStatus object with ID populated.

Cache provides two methods to retrieve the PodStatus: the non-blocking Get() and the blocking GetNewerThan() method. The component responsible for populating the cache is expected to call Delete() to explicitly free the cache entries.

func NewCache

func NewCache() Cache

NewCache creates a pod cache.

type CommandRunner

type CommandRunner interface {
	// RunInContainer synchronously executes the command in the container, and returns the output.
	// If the command completes with a non-0 exit code, a will be returned.
	RunInContainer(id ContainerID, cmd []string, timeout time.Duration) ([]byte, error)

CommandRunner interface allows to run command in a container.

type Container

type Container struct {
	// The ID of the container, used by the container runtime to identify
	// a container.
	ID ContainerID
	// The name of the container, which should be the same as specified by
	// v1.Container.
	Name string
	// The image name of the container, this also includes the tag of the image,
	// the expected form is "NAME:TAG".
	Image string
	// The id of the image used by the container.
	ImageID string
	// Hash of the container, used for comparison. Optional for containers
	// not managed by kubelet.
	Hash uint64
	// State is the state of the container.
	State State

Container provides the runtime information for a container, such as ID, hash, state of the container.

type ContainerID

type ContainerID struct {
	// The type of the container runtime. e.g. 'docker'.
	Type string
	// The identification of the container, this is comsumable by
	// the underlying container runtime. (Note that the container
	// runtime interface still takes the whole struct as input).
	ID string

ContainerID is a type that identifies a container.

func BuildContainerID

func BuildContainerID(typ, ID string) ContainerID

BuildContainerID returns the ContainerID given type and id.

func ParseContainerID

func ParseContainerID(containerID string) ContainerID

ParseContainerID is a convenience method for creating a ContainerID from an ID string.

func (*ContainerID) IsEmpty

func (c *ContainerID) IsEmpty() bool

IsEmpty returns whether given ContainerID is empty.

func (*ContainerID) MarshalJSON

func (c *ContainerID) MarshalJSON() ([]byte, error)

MarshalJSON formats a given ContainerID into a byte array.

func (*ContainerID) ParseString

func (c *ContainerID) ParseString(data string) error

ParseString converts given string into ContainerID

func (*ContainerID) String

func (c *ContainerID) String() string

func (*ContainerID) UnmarshalJSON

func (c *ContainerID) UnmarshalJSON(data []byte) error

UnmarshalJSON parses ContainerID from a given array of bytes.

type DeviceInfo

type DeviceInfo struct {
	// Path on host for mapping
	PathOnHost string
	// Path in Container to map
	PathInContainer string
	// Cgroup permissions
	Permissions string

DeviceInfo contains information about the device.

type DockerID

type DockerID string

DockerID is an ID of docker container. It is a type to make it clear when we're working with docker container Ids

func (DockerID) ContainerID

func (id DockerID) ContainerID() ContainerID

ContainerID converts DockerID into a ContainerID.

type EnvVar

type EnvVar struct {
	Name  string
	Value string

EnvVar represents the environment variable.

type GC

type GC interface {
	// Garbage collect containers.
	GarbageCollect() error
	// Deletes all unused containers, including containers belonging to pods that are terminated but not deleted
	DeleteAllUnusedContainers() error

GC manages garbage collection of dead containers.

Implementation is thread-compatible.

func NewContainerGC

func NewContainerGC(runtime Runtime, policy GCPolicy, sourcesReadyProvider SourcesReadyProvider) (GC, error)

NewContainerGC creates a new instance of GC with the specified policy.

type GCPolicy

type GCPolicy struct {
	// Minimum age at which a container can be garbage collected, zero for no limit.
	MinAge time.Duration

	// Max number of dead containers any single pod (UID, container name) pair is
	// allowed to have, less than zero for no limit.
	MaxPerPodContainer int

	// Max number of total dead containers, less than zero for no limit.
	MaxContainers int

GCPolicy specifies a policy for garbage collecting containers.

type HandlerRunner

type HandlerRunner interface {
	Run(containerID ContainerID, pod *v1.Pod, container *v1.Container, handler *v1.Handler) (string, error)

HandlerRunner runs a lifecycle handler for a container.

type Image

type Image struct {
	// ID of the image.
	ID string
	// Other names by which this image is known.
	RepoTags []string
	// Digests by which this image is known.
	RepoDigests []string
	// The size of the image in bytes.
	Size int64
	// ImageSpec for the image which include annotations.
	Spec ImageSpec

Image contains basic information about a container image.

type ImageService

type ImageService interface {
	// PullImage pulls an image from the network to local storage using the supplied
	// secrets if necessary. It returns a reference (digest or ID) to the pulled image.
	PullImage(image ImageSpec, pullSecrets []v1.Secret, podSandboxConfig *runtimeapi.PodSandboxConfig) (string, error)
	// GetImageRef gets the reference (digest or ID) of the image which has already been in
	// the local storage. It returns ("", nil) if the image isn't in the local storage.
	GetImageRef(image ImageSpec) (string, error)
	// Gets all images currently on the machine.
	ListImages() ([]Image, error)
	// Removes the specified image.
	RemoveImage(image ImageSpec) error
	// Returns Image statistics.
	ImageStats() (*ImageStats, error)

ImageService interfaces allows to work with image service.

type ImageSpec

type ImageSpec struct {
	// ID of the image.
	Image string
	// The annotations for the image.
	// This should be passed to CRI during image pulls and returned when images are listed.
	Annotations []Annotation

ImageSpec is an internal representation of an image. Currently, it wraps the value of a Container's Image field, but in the future it will include more detailed information about the different image types.

type ImageStats

type ImageStats struct {
	// Total amount of storage consumed by existing images.
	TotalStorageBytes uint64

ImageStats contains statistics about all the images currently available.

type Mount

type Mount struct {
	// Name of the volume mount.
	// TODO(yifan): Remove this field, as this is not representing the unique name of the mount,
	// but the volume name only.
	Name string
	// Path of the mount within the container.
	ContainerPath string
	// Path of the mount on the host.
	HostPath string
	// Whether the mount is read-only.
	ReadOnly bool
	// Whether the mount needs SELinux relabeling
	SELinuxRelabel bool
	// Requested propagation mode
	Propagation runtimeapi.MountPropagation

Mount represents a volume mount.

type OSInterface

type OSInterface interface {
	MkdirAll(path string, perm os.FileMode) error
	Symlink(oldname string, newname string) error
	Stat(path string) (os.FileInfo, error)
	Remove(path string) error
	RemoveAll(path string) error
	Create(path string) (*os.File, error)
	Chmod(path string, perm os.FileMode) error
	Hostname() (name string, err error)
	Chtimes(path string, atime time.Time, mtime time.Time) error
	Pipe() (r *os.File, w *os.File, err error)
	ReadDir(dirname string) ([]os.FileInfo, error)
	Glob(pattern string) ([]string, error)
	Open(name string) (*os.File, error)
	OpenFile(name string, flag int, perm os.FileMode) (*os.File, error)
	Rename(oldpath, newpath string) error

OSInterface collects system level operations that need to be mocked out during tests.

type Option

type Option func(Runtime)

Option is a functional option type for Runtime, useful for completely optional settings.

type Pod

type Pod struct {
	// The ID of the pod, which can be used to retrieve a particular pod
	// from the pod list returned by GetPods().
	ID types.UID
	// The name and namespace of the pod, which is readable by human.
	Name      string
	Namespace string
	// List of containers that belongs to this pod. It may contain only
	// running containers, or mixed with dead ones (when GetPods(true)).
	Containers []*Container
	// List of sandboxes associated with this pod. The sandboxes are converted
	// to Container temporarily to avoid substantial changes to other
	// components. This is only populated by kuberuntime.
	// TODO: use the runtimeApi.PodSandbox type directly.
	Sandboxes []*Container

Pod is a group of containers.

func ConvertPodStatusToRunningPod

func ConvertPodStatusToRunningPod(runtimeName string, podStatus *PodStatus) Pod

ConvertPodStatusToRunningPod returns Pod given PodStatus and container runtime string. TODO(random-liu): Convert PodStatus to running Pod, should be deprecated soon

func (*Pod) FindContainerByID

func (p *Pod) FindContainerByID(id ContainerID) *Container

FindContainerByID returns a container in the pod with the given ContainerID.

func (*Pod) FindContainerByName

func (p *Pod) FindContainerByName(containerName string) *Container

FindContainerByName returns a container in the pod with the given name. When there are multiple containers with the same name, the first match will be returned.

func (*Pod) FindSandboxByID

func (p *Pod) FindSandboxByID(id ContainerID) *Container

FindSandboxByID returns a sandbox in the pod with the given ContainerID.

func (*Pod) IsEmpty

func (p *Pod) IsEmpty() bool

IsEmpty returns true if the pod is empty.

func (*Pod) ToAPIPod

func (p *Pod) ToAPIPod() *v1.Pod

ToAPIPod converts Pod to v1.Pod. Note that if a field in v1.Pod has no corresponding field in Pod, the field would not be populated.

type PodPair

type PodPair struct {
	// APIPod is the v1.Pod
	APIPod *v1.Pod
	// RunningPod is the pod defined in pkg/kubelet/container/runtime#Pod
	RunningPod *Pod

PodPair contains both runtime#Pod and api#Pod

type PodStatus

type PodStatus struct {
	// ID of the pod.
	ID types.UID
	// Name of the pod.
	Name string
	// Namespace of the pod.
	Namespace string
	// All IPs assigned to this pod
	IPs []string
	// Status of containers in the pod.
	ContainerStatuses []*Status
	// Status of the pod sandbox.
	// Only for kuberuntime now, other runtime may keep it nil.
	SandboxStatuses []*runtimeapi.PodSandboxStatus

PodStatus represents the status of the pod and its containers. v1.PodStatus can be derived from examining PodStatus and v1.Pod.

func (*PodStatus) FindContainerStatusByName

func (podStatus *PodStatus) FindContainerStatusByName(containerName string) *Status

FindContainerStatusByName returns container status in the pod status with the given name. When there are multiple containers' statuses with the same name, the first match will be returned.

func (*PodStatus) GetRunningContainerStatuses

func (podStatus *PodStatus) GetRunningContainerStatuses() []*Status

GetRunningContainerStatuses returns container status of all the running containers in a pod

type PodSyncResult

type PodSyncResult struct {
	// Result of different sync actions
	SyncResults []*SyncResult
	// Error encountered in SyncPod() and KillPod() that is not already included in SyncResults
	SyncError error

PodSyncResult is the summary result of SyncPod() and KillPod()

func (*PodSyncResult) AddPodSyncResult

func (p *PodSyncResult) AddPodSyncResult(result PodSyncResult)

AddPodSyncResult merges a PodSyncResult to current one

func (*PodSyncResult) AddSyncResult

func (p *PodSyncResult) AddSyncResult(result ...*SyncResult)

AddSyncResult adds multiple SyncResult to current PodSyncResult

func (*PodSyncResult) Error

func (p *PodSyncResult) Error() error

Error returns an error summarizing all the errors in PodSyncResult

func (*PodSyncResult) Fail

func (p *PodSyncResult) Fail(err error)

Fail fails the PodSyncResult with an error occurred in SyncPod() and KillPod() itself

type Pods

type Pods []*Pod

Pods represents the list of pods

func (Pods) FindPod

func (p Pods) FindPod(podFullName string, podUID types.UID) Pod

FindPod combines FindPodByID and FindPodByFullName, it finds and returns a pod in the pod list either by the full name or the pod ID. It will return an empty pod if not found.

func (Pods) FindPodByFullName

func (p Pods) FindPodByFullName(podFullName string) Pod

FindPodByFullName finds and returns a pod in the pod list by the full name. It will return an empty pod if not found.

func (Pods) FindPodByID

func (p Pods) FindPodByID(podUID types.UID) Pod

FindPodByID finds and returns a pod in the pod list by UID. It will return an empty pod if not found.

type PortMapping

type PortMapping struct {
	// Name of the port mapping
	Name string
	// Protocol of the port mapping.
	Protocol v1.Protocol
	// The port number within the container.
	ContainerPort int
	// The port number on the host.
	HostPort int
	// The host IP.
	HostIP string

PortMapping contains information about the port mapping.

func MakePortMappings

func MakePortMappings(container *v1.Container) (ports []PortMapping)

MakePortMappings creates internal port mapping from api port mapping.

type RealOS

type RealOS struct{}

RealOS is used to dispatch the real system level operations.

func (RealOS) Chmod

func (RealOS) Chmod(path string, perm os.FileMode) error

Chmod will change the permissions on the specified path or return an error.

func (RealOS) Chtimes

func (RealOS) Chtimes(path string, atime time.Time, mtime time.Time) error

Chtimes will call os.Chtimes to change the atime and mtime of the path

func (RealOS) Create

func (RealOS) Create(path string) (*os.File, error)

Create will call os.Create to create and return a file at path.

func (RealOS) Glob

func (RealOS) Glob(pattern string) ([]string, error)

Glob will call filepath.Glob to return the names of all files matching pattern.

func (RealOS) Hostname

func (RealOS) Hostname() (name string, err error)

Hostname will call os.Hostname to return the hostname.

func (RealOS) MkdirAll

func (RealOS) MkdirAll(path string, perm os.FileMode) error

MkdirAll will call os.MkdirAll to create a directory.

func (RealOS) Open

func (RealOS) Open(name string) (*os.File, error)

Open will call os.Open to return the file.

func (RealOS) OpenFile

func (RealOS) OpenFile(name string, flag int, perm os.FileMode) (*os.File, error)

OpenFile will call os.OpenFile to return the file.

func (RealOS) Pipe

func (RealOS) Pipe() (r *os.File, w *os.File, err error)

Pipe will call os.Pipe to return a connected pair of pipe.

func (RealOS) ReadDir

func (RealOS) ReadDir(dirname string) ([]os.FileInfo, error)

ReadDir will call ioutil.ReadDir to return the files under the directory.

func (RealOS) Remove

func (RealOS) Remove(path string) error

Remove will call os.Remove to remove the path.

func (RealOS) RemoveAll

func (RealOS) RemoveAll(path string) error

RemoveAll will call os.RemoveAll to remove the path and its children.

func (RealOS) Rename

func (RealOS) Rename(oldpath, newpath string) error

Rename will call os.Rename to rename a file.

func (RealOS) Stat

func (RealOS) Stat(path string) (os.FileInfo, error)

Stat will call os.Stat to get the FileInfo for a given path

func (RealOS) Symlink(oldname string, newname string) error

Symlink will call os.Symlink to create a symbolic link.

type RunContainerOptions

type RunContainerOptions struct {
	// The environment variables list.
	Envs []EnvVar
	// The mounts for the containers.
	Mounts []Mount
	// The host devices mapped into the containers.
	Devices []DeviceInfo
	// The port mappings for the containers.
	PortMappings []PortMapping
	// The annotations for the container
	// These annotations are generated by other components (i.e.,
	// not users). Currently, only device plugins populate the annotations.
	Annotations []Annotation
	// If the container has specified the TerminationMessagePath, then
	// this directory will be used to create and mount the log file to
	// container.TerminationMessagePath
	PodContainerDir string
	// The type of container rootfs
	ReadOnly bool
	// hostname for pod containers
	Hostname string
	// EnableHostUserNamespace sets userns=host when users request host namespaces (pid, ipc, net),
	// are using non-namespaced capabilities (mknod, sys_time, sys_module), the pod contains a privileged container,
	// or using host path volumes.
	// This should only be enabled when the container runtime is performing user remapping AND if the
	// experimental behavior is desired.
	EnableHostUserNamespace bool

RunContainerOptions specify the options which are necessary for running containers

type Runtime

type Runtime interface {
	// Type returns the type of the container runtime.
	Type() string

	//SupportsSingleFileMapping returns whether the container runtime supports single file mappings or not.
	SupportsSingleFileMapping() bool

	// Version returns the version information of the container runtime.
	Version() (Version, error)

	// APIVersion returns the cached API version information of the container
	// runtime. Implementation is expected to update this cache periodically.
	// This may be different from the runtime engine's version.
	// TODO(random-liu): We should fold this into Version()
	APIVersion() (Version, error)
	// Status returns the status of the runtime. An error is returned if the Status
	// function itself fails, nil otherwise.
	Status() (*RuntimeStatus, error)
	// GetPods returns a list of containers grouped by pods. The boolean parameter
	// specifies whether the runtime returns all containers including those already
	// exited and dead containers (used for garbage collection).
	GetPods(all bool) ([]*Pod, error)
	// GarbageCollect removes dead containers using the specified container gc policy
	// If allSourcesReady is not true, it means that kubelet doesn't have the
	// complete list of pods from all available sources (e.g., apiserver, http,
	// file). In this case, garbage collector should refrain itself from aggressive
	// behavior such as removing all containers of unrecognized pods (yet).
	// If evictNonDeletedPods is set to true, containers and sandboxes belonging to pods
	// that are terminated, but not deleted will be evicted.  Otherwise, only deleted pods will be GC'd.
	// TODO: Revisit this method and make it cleaner.
	GarbageCollect(gcPolicy GCPolicy, allSourcesReady bool, evictNonDeletedPods bool) error
	// Syncs the running pod into the desired pod.
	SyncPod(pod *v1.Pod, podStatus *PodStatus, pullSecrets []v1.Secret, backOff *flowcontrol.Backoff) PodSyncResult
	// KillPod kills all the containers of a pod. Pod may be nil, running pod must not be.
	// TODO(random-liu): Return PodSyncResult in KillPod.
	// gracePeriodOverride if specified allows the caller to override the pod default grace period.
	// only hard kill paths are allowed to specify a gracePeriodOverride in the kubelet in order to not corrupt user data.
	// it is useful when doing SIGKILL for hard eviction scenarios, or max grace period during soft eviction scenarios.
	KillPod(pod *v1.Pod, runningPod Pod, gracePeriodOverride *int64) error
	// GetPodStatus retrieves the status of the pod, including the
	// information of all containers in the pod that are visible in Runtime.
	GetPodStatus(uid types.UID, name, namespace string) (*PodStatus, error)
	// TODO(vmarmol): Unify pod and containerID args.
	// GetContainerLogs returns logs of a specific container. By
	// default, it returns a snapshot of the container log. Set 'follow' to true to
	// stream the log. Set 'follow' to false and specify the number of lines (e.g.
	// "100" or "all") to tail the log.
	GetContainerLogs(ctx context.Context, pod *v1.Pod, containerID ContainerID, logOptions *v1.PodLogOptions, stdout, stderr io.Writer) (err error)
	// Delete a container. If the container is still running, an error is returned.
	DeleteContainer(containerID ContainerID) error
	// ImageService provides methods to image-related methods.
	// UpdatePodCIDR sends a new podCIDR to the runtime.
	// This method just proxies a new runtimeConfig with the updated
	// CIDR value down to the runtime shim.
	UpdatePodCIDR(podCIDR string) error

Runtime interface defines the interfaces that should be implemented by a container runtime. Thread safety is required from implementations of this interface.

type RuntimeCache

type RuntimeCache interface {
	GetPods() ([]*Pod, error)
	ForceUpdateIfOlder(time.Time) error

RuntimeCache is in interface for obtaining cached Pods.

func NewRuntimeCache

func NewRuntimeCache(getter podsGetter) (RuntimeCache, error)

NewRuntimeCache creates a container runtime cache.

type RuntimeCondition

type RuntimeCondition struct {
	// Type of runtime condition.
	Type RuntimeConditionType
	// Status of the condition, one of true/false.
	Status bool
	// Reason is brief reason for the condition's last transition.
	Reason string
	// Message is human readable message indicating details about last transition.
	Message string

RuntimeCondition contains condition information for the runtime.

func (*RuntimeCondition) String

func (c *RuntimeCondition) String() string

String formats the runtime condition into human readable string.

type RuntimeConditionType

type RuntimeConditionType string

RuntimeConditionType is the types of required runtime conditions.

const (
	// RuntimeReady means the runtime is up and ready to accept basic containers.
	RuntimeReady RuntimeConditionType = "RuntimeReady"
	// NetworkReady means the runtime network is up and ready to accept containers which require network.
	NetworkReady RuntimeConditionType = "NetworkReady"

type RuntimeHelper

type RuntimeHelper interface {
	GenerateRunContainerOptions(pod *v1.Pod, container *v1.Container, podIP string, podIPs []string) (contOpts *RunContainerOptions, cleanupAction func(), err error)
	GetPodDNS(pod *v1.Pod) (dnsConfig *runtimeapi.DNSConfig, err error)
	// GetPodCgroupParent returns the CgroupName identifier, and its literal cgroupfs form on the host
	// of a pod.
	GetPodCgroupParent(pod *v1.Pod) string
	GetPodDir(podUID types.UID) string
	GeneratePodHostNameAndDomain(pod *v1.Pod) (hostname string, hostDomain string, err error)
	// GetExtraSupplementalGroupsForPod returns a list of the extra
	// supplemental groups for the Pod. These extra supplemental groups come
	// from annotations on persistent volumes that the pod depends on.
	GetExtraSupplementalGroupsForPod(pod *v1.Pod) []int64

RuntimeHelper wraps kubelet to make container runtime able to get necessary informations like the RunContainerOptions, DNS settings, Host IP.

type RuntimeStatus

type RuntimeStatus struct {
	// Conditions is an array of current observed runtime conditions.
	Conditions []RuntimeCondition

RuntimeStatus contains the status of the runtime.

func (*RuntimeStatus) GetRuntimeCondition

func (r *RuntimeStatus) GetRuntimeCondition(t RuntimeConditionType) *RuntimeCondition

GetRuntimeCondition gets a specified runtime condition from the runtime status.

func (*RuntimeStatus) String

func (r *RuntimeStatus) String() string

String formats the runtime status into human readable string.

type SortContainerStatusesByCreationTime

type SortContainerStatusesByCreationTime []*Status

SortContainerStatusesByCreationTime sorts the container statuses by creation time.

func (SortContainerStatusesByCreationTime) Len

func (s SortContainerStatusesByCreationTime) Len() int

func (SortContainerStatusesByCreationTime) Less

func (s SortContainerStatusesByCreationTime) Less(i, j int) bool

func (SortContainerStatusesByCreationTime) Swap

func (s SortContainerStatusesByCreationTime) Swap(i, j int)

type SourcesReadyProvider

type SourcesReadyProvider interface {
	// AllReady returns true if the currently configured sources have all been seen.
	AllReady() bool

SourcesReadyProvider knows how to determine if configuration sources are ready

type State

type State string

State represents the state of a container

const (
	// ContainerStateCreated indicates a container that has been created (e.g. with docker create) but not started.
	ContainerStateCreated State = "created"
	// ContainerStateRunning indicates a currently running container.
	ContainerStateRunning State = "running"
	// ContainerStateExited indicates a container that ran and completed ("stopped" in other contexts, although a created container is technically also "stopped").
	ContainerStateExited State = "exited"
	// ContainerStateUnknown encompasses all the states that we currently don't care about (like restarting, paused, dead).
	ContainerStateUnknown State = "unknown"

func SandboxToContainerState

func SandboxToContainerState(state runtimeapi.PodSandboxState) State

SandboxToContainerState converts runtimeapi.PodSandboxState to kubecontainer.State. This is only needed because we need to return sandboxes as if they were kubecontainer.Containers to avoid substantial changes to PLEG. TODO: Remove this once it becomes obsolete.

type Status

type Status struct {
	// ID of the container.
	ID ContainerID
	// Name of the container.
	Name string
	// Status of the container.
	State State
	// Creation time of the container.
	CreatedAt time.Time
	// Start time of the container.
	StartedAt time.Time
	// Finish time of the container.
	FinishedAt time.Time
	// Exit code of the container.
	ExitCode int
	// Name of the image, this also includes the tag of the image,
	// the expected form is "NAME:TAG".
	Image string
	// ID of the image.
	ImageID string
	// Hash of the container, used for comparison.
	Hash uint64
	// Number of times that the container has been restarted.
	RestartCount int
	// A string explains why container is in such a status.
	Reason string
	// Message written by the container before exiting (stored in
	// TerminationMessagePath).
	Message string

Status represents the status of a container.

type StreamingRuntime

type StreamingRuntime interface {
	GetExec(id ContainerID, cmd []string, stdin, stdout, stderr, tty bool) (*url.URL, error)
	GetAttach(id ContainerID, stdin, stdout, stderr, tty bool) (*url.URL, error)
	GetPortForward(podName, podNamespace string, podUID types.UID, ports []int32) (*url.URL, error)

StreamingRuntime is the interface implemented by runtimes that handle the serving of the streaming calls (exec/attach/port-forward) themselves. In this case, Kubelet should redirect to the runtime server.

type SyncAction

type SyncAction string

SyncAction indicates different kind of actions in SyncPod() and KillPod(). Now there are only actions about start/kill container and setup/teardown network.

const (
	// StartContainer action
	StartContainer SyncAction = "StartContainer"
	// KillContainer action
	KillContainer SyncAction = "KillContainer"
	// SetupNetwork action
	SetupNetwork SyncAction = "SetupNetwork"
	// TeardownNetwork action
	TeardownNetwork SyncAction = "TeardownNetwork"
	// InitContainer action
	InitContainer SyncAction = "InitContainer"
	// CreatePodSandbox action
	CreatePodSandbox SyncAction = "CreatePodSandbox"
	// ConfigPodSandbox action
	ConfigPodSandbox SyncAction = "ConfigPodSandbox"
	// KillPodSandbox action
	KillPodSandbox SyncAction = "KillPodSandbox"

type SyncResult

type SyncResult struct {
	// The associated action of the result
	Action SyncAction
	// The target of the action, now the target can only be:
	//  * Container: Target should be container name
	//  * Network: Target is useless now, we just set it as pod full name now
	Target interface{}
	// Brief error reason
	Error error
	// Human readable error reason
	Message string

SyncResult is the result of sync action.

func NewSyncResult

func NewSyncResult(action SyncAction, target interface{}) *SyncResult

NewSyncResult generates new SyncResult with specific Action and Target

func (*SyncResult) Fail

func (r *SyncResult) Fail(err error, msg string)

Fail fails the SyncResult with specific error and message

type TestRuntimeCache

type TestRuntimeCache struct {
	// contains filtered or unexported fields

TestRuntimeCache embeds runtimeCache with some additional methods for testing. It must be declared in the container package to have visibility to runtimeCache. It cannot be in a "..._test.go" file in order for runtime_cache_test.go to have cross-package visibility to it. (cross-package declarations in test files cannot be used from dot imports if this package is vendored)

func NewTestRuntimeCache

func NewTestRuntimeCache(getter podsGetter) *TestRuntimeCache

NewTestRuntimeCache creates a new instance of TestRuntimeCache.

func (*TestRuntimeCache) ForceUpdateIfOlder

func (r *TestRuntimeCache) ForceUpdateIfOlder(minExpectedCacheTime time.Time) error

func (*TestRuntimeCache) GetCachedPods

func (r *TestRuntimeCache) GetCachedPods() []*Pod

GetCachedPods returns the cached pods.

func (*TestRuntimeCache) GetPods

func (r *TestRuntimeCache) GetPods() ([]*Pod, error)

GetPods returns the cached pods if they are not outdated; otherwise, it retrieves the latest pods and return them.

func (*TestRuntimeCache) UpdateCacheWithLock

func (r *TestRuntimeCache) UpdateCacheWithLock() error

UpdateCacheWithLock updates the cache with the lock.

type Version

type Version interface {
	// Compare compares two versions of the runtime. On success it returns -1
	// if the version is less than the other, 1 if it is greater than the other,
	// or 0 if they are equal.
	Compare(other string) (int, error)
	// String returns a string that represents the version.
	String() string

Version interface allow to consume the runtime versions - compare and format to string.

type VolumeInfo

type VolumeInfo struct {
	// Mounter is the volume's mounter
	Mounter volume.Mounter
	// BlockVolumeMapper is the Block volume's mapper
	BlockVolumeMapper volume.BlockVolumeMapper
	// SELinuxLabeled indicates whether this volume has had the
	// pod's SELinux label applied to it or not
	SELinuxLabeled bool
	// Whether the volume permission is set to read-only or not
	// This value is passed from volume.spec
	ReadOnly bool
	// Inner volume spec name, which is the PV name if used, otherwise
	// it is the same as the outer volume spec name.
	InnerVolumeSpecName string

VolumeInfo contains information about the volume.

type VolumeMap

type VolumeMap map[string]VolumeInfo

VolumeMap represents the map of volumes.


Path Synopsis
testing Code generated by mockery v1.0.0