network

package
v1.24.10-rc.0 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Dec 8, 2022 License: Apache-2.0 Imports: 29 Imported by: 12

Documentation

Index

Constants

View Source
const (
	// EndpointHTTPPort is an endpoint HTTP port for testing.
	EndpointHTTPPort = 8083
	// EndpointUDPPort is an endpoint UDP port for testing.
	EndpointUDPPort = 8081
	// EndpointSCTPPort is an endpoint SCTP port for testing.
	EndpointSCTPPort = 8082

	// ClusterHTTPPort is a cluster HTTP port for testing.
	ClusterHTTPPort = 80
	// ClusterUDPPort is a cluster UDP port for testing.
	ClusterUDPPort = 90
	// ClusterSCTPPort is a cluster SCTP port for testing.
	ClusterSCTPPort = 95

	// SessionAffinityChecks is number of checks to hit a given set of endpoints when enable session affinity.
	SessionAffinityChecks = 10
	// RegexIPv4 is a regex to match IPv4 addresses
	RegexIPv4 = "(?:\\d+)\\.(?:\\d+)\\.(?:\\d+)\\.(?:\\d+)"
	// RegexIPv6 is a regex to match IPv6 addresses
	RegexIPv6 = "" /* 1910-byte string literal not displayed */

)

Variables

NetexecImageName is the image name for agnhost.

Functions

func BlockNetwork added in v1.19.0

func BlockNetwork(from string, to string)

BlockNetwork blocks network between the given from value and the given to value. The following helper functions can block/unblock network from source host to destination host by manipulating iptable rules. This function assumes it can ssh to the source host.

Caution: Recommend to input IP instead of hostnames. Using hostnames will cause iptables to do a DNS lookup to resolve the name to an IP address, which will slow down the test and cause it to fail if DNS is absent or broken.

Suggested usage pattern:

func foo() {
	...
	defer UnblockNetwork(from, to)
	BlockNetwork(from, to)
	...
}

func EnableDualStack added in v1.20.0

func EnableDualStack(config *NetworkingTestConfig)

EnableDualStack create Dual Stack services

func EnableSCTP added in v1.20.0

func EnableSCTP(config *NetworkingTestConfig)

EnableSCTP listen on SCTP ports on the endpoints

func EndpointsUseHostNetwork added in v1.20.0

func EndpointsUseHostNetwork(config *NetworkingTestConfig)

EndpointsUseHostNetwork run the endpoints pods with HostNetwork=true.

func TestUnderTemporaryNetworkFailure

func TestUnderTemporaryNetworkFailure(c clientset.Interface, ns string, node *v1.Node, testFunc func())

TestUnderTemporaryNetworkFailure blocks outgoing network traffic on 'node'. Then runs testFunc and returns its status. At the end (even in case of errors), the network traffic is brought back to normal. This function executes commands on a node so it will work only for some environments.

func UnblockNetwork added in v1.19.0

func UnblockNetwork(from string, to string)

UnblockNetwork unblocks network between the given from value and the given to value.

func UseHostNetwork added in v1.20.0

func UseHostNetwork(config *NetworkingTestConfig)

UseHostNetwork run the test container with HostNetwork=true.

func WaitForService added in v1.19.0

func WaitForService(c clientset.Interface, namespace, name string, exist bool, interval, timeout time.Duration) error

WaitForService waits until the service appears (exist == true), or disappears (exist == false)

Types

type HTTPPokeParams

type HTTPPokeParams struct {
	Timeout        time.Duration // default = 10 secs
	ExpectCode     int           // default = 200
	BodyContains   string
	RetriableCodes []int
	EnableHTTPS    bool
}

HTTPPokeParams is a struct for HTTP poke parameters.

type HTTPPokeResult

type HTTPPokeResult struct {
	Status HTTPPokeStatus
	Code   int    // HTTP code: 0 if the connection was not made
	Error  error  // if there was any error
	Body   []byte // if code != 0
}

HTTPPokeResult is a struct for HTTP poke result.

func PokeHTTP

func PokeHTTP(host string, port int, path string, params *HTTPPokeParams) HTTPPokeResult

PokeHTTP tries to connect to a host on a port for a given URL path. Callers can specify additional success parameters, if desired.

The result status will be characterized as precisely as possible, given the known users of this.

The result code will be zero in case of any failure to connect, or non-zero if the HTTP transaction completed (even if the other test params make this a failure).

The result error will be populated for any status other than Success.

The result body will be populated if the HTTP transaction was completed, even if the other test params make this a failure).

type HTTPPokeStatus

type HTTPPokeStatus string

HTTPPokeStatus is string for representing HTTP poke status.

const (
	// HTTPSuccess is HTTP poke status which is success.
	HTTPSuccess HTTPPokeStatus = "Success"
	// HTTPError is HTTP poke status which is error.
	HTTPError HTTPPokeStatus = "UnknownError"
	// HTTPTimeout is HTTP poke status which is timeout.
	HTTPTimeout HTTPPokeStatus = "TimedOut"
	// HTTPRefused is HTTP poke status which is connection refused.
	HTTPRefused HTTPPokeStatus = "ConnectionRefused"
	// HTTPRetryCode is HTTP poke status which is retry code.
	HTTPRetryCode HTTPPokeStatus = "RetryCode"
	// HTTPWrongCode is HTTP poke status which is wrong code.
	HTTPWrongCode HTTPPokeStatus = "WrongCode"
	// HTTPBadResponse is HTTP poke status which is bad response.
	HTTPBadResponse HTTPPokeStatus = "BadResponse"
)

type NetexecDialResponse added in v1.19.0

type NetexecDialResponse struct {
	Responses []string `json:"responses"`
	Errors    []string `json:"errors"`
}

NetexecDialResponse represents the response returned by the `netexec` subcommand of `agnhost`

type NetworkingTestConfig

type NetworkingTestConfig struct {
	// TestContaienrPod is a test pod running the netexec image. It is capable
	// of executing tcp/udp requests against ip:port.
	TestContainerPod *v1.Pod
	// HostTestContainerPod is a pod running using the hostexec image.
	HostTestContainerPod *v1.Pod
	// if the HostTestContainerPod is running with HostNetwork=true.
	HostNetwork bool
	// if the endpoints Pods are running with HostNetwork=true.
	EndpointsHostNetwork bool
	// if the test pods are listening on sctp port. We need this as sctp tests
	// are marked as disruptive as they may load the sctp module.
	SCTPEnabled bool
	// DualStackEnabled enables dual stack on services
	DualStackEnabled bool
	// EndpointPods are the pods belonging to the Service created by this
	// test config. Each invocation of `setup` creates a service with
	// 1 pod per node running the netexecImage.
	EndpointPods []*v1.Pod

	// NodePortService is a Service with Type=NodePort spanning over all
	// endpointPods.
	NodePortService *v1.Service
	// SessionAffinityService is a Service with SessionAffinity=ClientIP
	// spanning over all endpointPods.
	SessionAffinityService *v1.Service
	// Nodes is a list of nodes in the cluster.
	Nodes []v1.Node
	// MaxTries is the number of retries tolerated for tests run against
	// endpoints and services created by this config.
	MaxTries int
	// The ClusterIP of the Service created by this test config.
	ClusterIP string
	// The SecondaryClusterIP of the Service created by this test config.
	SecondaryClusterIP string
	// NodeIP it's an ExternalIP if the node has one,
	// or an InternalIP if not, for use in nodePort testing.
	NodeIP string
	// SecondaryNodeIP it's an ExternalIP of the secondary IP family if the node has one,
	// or an InternalIP if not, for usein nodePort testing.
	SecondaryNodeIP string
	// The http/udp/sctp nodePorts of the Service.
	NodeHTTPPort int
	NodeUDPPort  int
	NodeSCTPPort int
	// The kubernetes namespace within which all resources for this
	// config are created
	Namespace string
	// contains filtered or unexported fields
}

NetworkingTestConfig is a convenience class around some utility methods for testing kubeproxy/networking/services/endpoints.

func NewCoreNetworkingTestConfig

func NewCoreNetworkingTestConfig(f *framework.Framework, hostNetwork bool) *NetworkingTestConfig

NewCoreNetworkingTestConfig creates and sets up a new test config helper for Node E2E.

func NewNetworkingTestConfig

func NewNetworkingTestConfig(f *framework.Framework, setters ...Option) *NetworkingTestConfig

NewNetworkingTestConfig creates and sets up a new test config helper.

func (*NetworkingTestConfig) CreateService added in v1.20.0

func (config *NetworkingTestConfig) CreateService(serviceSpec *v1.Service) *v1.Service

CreateService creates the provided service in config.Namespace and returns created service

func (*NetworkingTestConfig) DeleteNetProxyPod

func (config *NetworkingTestConfig) DeleteNetProxyPod()

DeleteNetProxyPod deletes the first endpoint pod and waits for it being removed.

func (*NetworkingTestConfig) DeleteNodePortService

func (config *NetworkingTestConfig) DeleteNodePortService()

DeleteNodePortService deletes NodePort service.

func (*NetworkingTestConfig) DialEchoFromTestContainer

func (config *NetworkingTestConfig) DialEchoFromTestContainer(protocol, targetIP string, targetPort, maxTries, minTries int, echoMessage string) error

DialEchoFromTestContainer executes a curl via kubectl exec in a test container. The response is expected to match the echoMessage, Returns an error to be handled by the caller.

func (*NetworkingTestConfig) DialFromContainer

func (config *NetworkingTestConfig) DialFromContainer(protocol, dialCommand, containerIP, targetIP string, containerHTTPPort, targetPort, maxTries, minTries int, expectedResponses sets.String) error

DialFromContainer executes a curl via kubectl exec in a test container, which might then translate to a tcp or udp request based on the protocol argument in the url.

  • minTries is the minimum number of curl attempts required before declaring success. Set to 0 if you'd like to return as soon as all endpoints respond at least once.
  • maxTries is the maximum number of curl attempts. If this many attempts pass and we don't see all expected endpoints, the test fails.
  • targetIP is the source Pod IP that will dial the given dialCommand using the given protocol.
  • dialCommand is the command that the targetIP will send to the targetIP using the given protocol. the dialCommand should be formatted properly for the protocol (http: URL path+parameters, udp: command%20parameters, where parameters are optional)
  • expectedResponses is the unordered set of responses to wait for. The responses are based on the dialCommand; for example, for the dialCommand "hostname", the expectedResponses should contain the hostnames reported by each pod in the service through /hostName.

maxTries == minTries will confirm that we see the expected endpoints and no more for maxTries. Use this if you want to eg: fail a readiness check on a pod and confirm it doesn't show up as an endpoint. Returns nil if no error, or error message if failed after trying maxTries.

func (*NetworkingTestConfig) DialFromEndpointContainer

func (config *NetworkingTestConfig) DialFromEndpointContainer(protocol, targetIP string, targetPort, maxTries, minTries int, expectedEps sets.String) error

DialFromEndpointContainer executes a curl via kubectl exec in an endpoint container. Returns an error to be handled by the caller.

func (*NetworkingTestConfig) DialFromNode

func (config *NetworkingTestConfig) DialFromNode(protocol, targetIP string, targetPort, maxTries, minTries int, expectedEps sets.String) error

DialFromNode executes a tcp/udp curl/nc request based on protocol via kubectl exec in a test container running with host networking.

  • minTries is the minimum number of curl/nc attempts required before declaring success. If 0, then we return as soon as all endpoints succeed.
  • There is no logical change to test results if faillures happen AFTER endpoints have succeeded, hence over-padding minTries will NOT reverse a successful result and is thus not very useful yet (See the TODO about checking probability, which isnt implemented yet).
  • maxTries is the maximum number of curl/echo attempts before an error is returned. The smaller this number is, the less 'slack' there is for declaring success.
  • if maxTries < expectedEps, this test is guaranteed to return an error, because all endpoints won't be hit.
  • maxTries == minTries will return as soon as all endpoints succeed (or fail once maxTries is reached without success on all endpoints). In general its prudent to have a high enough level of minTries to guarantee that all pods get a fair chance at receiving traffic.

func (*NetworkingTestConfig) DialFromTestContainer

func (config *NetworkingTestConfig) DialFromTestContainer(protocol, targetIP string, targetPort, maxTries, minTries int, expectedEps sets.String) error

DialFromTestContainer executes a curl via kubectl exec in a test container. Returns an error to be handled by the caller.

func (*NetworkingTestConfig) EndpointHostnames

func (config *NetworkingTestConfig) EndpointHostnames() sets.String

EndpointHostnames returns a set of hostnames for existing endpoints.

func (*NetworkingTestConfig) GetEndpointsFromContainer

func (config *NetworkingTestConfig) GetEndpointsFromContainer(protocol, containerIP, targetIP string, containerHTTPPort, targetPort, tries int) (sets.String, error)

GetEndpointsFromContainer executes a curl via kubectl exec in a test container, which might then translate to a tcp or udp request based on the protocol argument in the url. It returns all different endpoints from multiple retries.

  • tries is the number of curl attempts. If this many attempts pass and we don't see any endpoints, the test fails.

func (*NetworkingTestConfig) GetEndpointsFromTestContainer

func (config *NetworkingTestConfig) GetEndpointsFromTestContainer(protocol, targetIP string, targetPort, tries int) (sets.String, error)

GetEndpointsFromTestContainer executes a curl via kubectl exec in a test container.

func (*NetworkingTestConfig) GetHTTPCodeFromTestContainer added in v1.19.0

func (config *NetworkingTestConfig) GetHTTPCodeFromTestContainer(path, targetIP string, targetPort int) (int, error)

GetHTTPCodeFromTestContainer executes a curl via kubectl exec in a test container and returns the status code.

func (*NetworkingTestConfig) GetResponseFromContainer added in v1.19.0

func (config *NetworkingTestConfig) GetResponseFromContainer(protocol, dialCommand, containerIP, targetIP string, containerHTTPPort, targetPort int) (NetexecDialResponse, error)

GetResponseFromContainer executes a curl via kubectl exec in a container.

func (*NetworkingTestConfig) GetResponseFromTestContainer added in v1.19.0

func (config *NetworkingTestConfig) GetResponseFromTestContainer(protocol, dialCommand, targetIP string, targetPort int) (NetexecDialResponse, error)

GetResponseFromTestContainer executes a curl via kubectl exec in a test container.

func (*NetworkingTestConfig) GetSelfURL

func (config *NetworkingTestConfig) GetSelfURL(port int32, path string, expected string)

GetSelfURL executes a curl against the given path via kubectl exec into a test container running with host networking, and fails if the output doesn't match the expected string.

func (*NetworkingTestConfig) GetSelfURLStatusCode

func (config *NetworkingTestConfig) GetSelfURLStatusCode(port int32, path string, expected string)

GetSelfURLStatusCode executes a curl against the given path via kubectl exec into a test container running with host networking, and fails if the returned status code doesn't match the expected string.

type Option added in v1.20.0

type Option func(*NetworkingTestConfig)

Option is used to configure the NetworkingTest object

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL