Documentation
¶
Overview ¶
* This file is part of the KubeVirt project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * * Copyright 2018 Red Hat, Inc. *
* This file is part of the KubeVirt project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * * Copyright 2022 Red Hat, Inc. *
* This file is part of the KubeVirt project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * * Copyright 2019 Red Hat, Inc. *
Index ¶
- Constants
- Variables
- func AddVersionSeparatorPrefix(version string) string
- func GetAllRoutes(namespace string) []*routev1.Route
- func GetAllSCC(namespace string) []*secv1.SecurityContextConstraints
- func LoadCertificates(secret *k8sv1.Secret) (serverCrt *tls.Certificate, err error)
- func MergeCABundle(currentCert *tls.Certificate, currentBundle []byte, ...) ([]byte, int, error)
- func NewApiServerDeployment(...) (*appsv1.Deployment, error)
- func NewApiServerService(namespace string) *corev1.Service
- func NewCACertSecrets(operatorNamespace string) []*k8sv1.Secret
- func NewCAConfigMaps(operatorNamespace string) []*k8sv1.ConfigMap
- func NewCertSecrets(installNamespace string, operatorNamespace string) []*k8sv1.Secret
- func NewClusterInstancetypes() ([]*instancetypev1beta1.VirtualMachineClusterInstancetype, error)
- func NewClusterPreferences() ([]*instancetypev1beta1.VirtualMachineClusterPreference, error)
- func NewControllerDeployment(...) (*appsv1.Deployment, error)
- func NewExportProxyDeployment(...) (*appsv1.Deployment, error)
- func NewExportProxyRoute(namespace string) *routev1.Route
- func NewExportProxyService(namespace string) *corev1.Service
- func NewHandlerDaemonSet(...) (*appsv1.DaemonSet, error)
- func NewKubeVirtControllerSCC(namespace string) *secv1.SecurityContextConstraints
- func NewKubeVirtCrd() (*extv1.CustomResourceDefinition, error)
- func NewKubeVirtHandlerSCC(namespace string) *secv1.SecurityContextConstraints
- func NewKubeVirtPriorityClassCR() *schedulingv1.PriorityClass
- func NewMigrationPolicyCrd() (*extv1.CustomResourceDefinition, error)
- func NewOperatorDeployment(...) (*appsv1.Deployment, error)
- func NewOperatorWebhookService(operatorNamespace string) *corev1.Service
- func NewOpertorValidatingWebhookConfiguration(operatorNamespace string) *admissionregistrationv1.ValidatingWebhookConfiguration
- func NewPodDisruptionBudgetForDeployment(deployment *appsv1.Deployment) *policyv1.PodDisruptionBudget
- func NewPresetCrd() (*extv1.CustomResourceDefinition, error)
- func NewPrometheusService(namespace string) *corev1.Service
- func NewReplicaSetCrd() (*extv1.CustomResourceDefinition, error)
- func NewServiceMonitorCR(namespace string, monitorNamespace string, insecureSkipVerify bool) *promv1.ServiceMonitor
- func NewVirtAPIAPIServices(installNamespace string) []*apiregv1.APIService
- func NewVirtAPIMutatingWebhookConfiguration(installNamespace string) *admissionregistrationv1.MutatingWebhookConfiguration
- func NewVirtAPIValidatingWebhookConfiguration(installNamespace string) *admissionregistrationv1.ValidatingWebhookConfiguration
- func NewVirtualMachineCloneCrd() (*extv1.CustomResourceDefinition, error)
- func NewVirtualMachineClusterInstancetypeCrd() (*extv1.CustomResourceDefinition, error)
- func NewVirtualMachineClusterPreferenceCrd() (*extv1.CustomResourceDefinition, error)
- func NewVirtualMachineCrd() (*extv1.CustomResourceDefinition, error)
- func NewVirtualMachineExportCrd() (*extv1.CustomResourceDefinition, error)
- func NewVirtualMachineInstanceCrd() (*extv1.CustomResourceDefinition, error)
- func NewVirtualMachineInstanceMigrationCrd() (*extv1.CustomResourceDefinition, error)
- func NewVirtualMachineInstancetypeCrd() (*extv1.CustomResourceDefinition, error)
- func NewVirtualMachinePoolCrd() (*extv1.CustomResourceDefinition, error)
- func NewVirtualMachinePreferenceCrd() (*extv1.CustomResourceDefinition, error)
- func NewVirtualMachineRestoreCrd() (*extv1.CustomResourceDefinition, error)
- func NewVirtualMachineSnapshotContentCrd() (*extv1.CustomResourceDefinition, error)
- func NewVirtualMachineSnapshotCrd() (*extv1.CustomResourceDefinition, error)
- func NextRotationDeadline(cert *tls.Certificate, ca *tls.Certificate, renewBefore *metav1.Duration, ...) time.Time
- func PopulateSecretWithCertificate(secret *k8sv1.Secret, caCert *tls.Certificate, duration *metav1.Duration) (err error)
- func RenderPrHelperContainer(image string, pullPolicy corev1.PullPolicy) corev1.Container
- func ValidateSecret(secret *k8sv1.Secret) error
- type CertificateCreationCallback
Constants ¶
View Source
const ( VirtHandlerName = "virt-handler" PrHelperName = "pr-helper" )
View Source
const ( VirtAPIName = "virt-api" VirtControllerName = "virt-controller" VirtOperatorName = "virt-operator" VirtExportProxyName = "virt-exportproxy" )
View Source
const ( KubeVirtCASecretName = "kubevirt-ca" KubeVirtExportCASecretName = "kubevirt-export-ca" VirtHandlerCertSecretName = "kubevirt-virt-handler-certs" VirtHandlerServerCertSecretName = "kubevirt-virt-handler-server-certs" VirtOperatorCertSecretName = "kubevirt-operator-certs" VirtApiCertSecretName = "kubevirt-virt-api-certs" VirtControllerCertSecretName = "kubevirt-controller-certs" VirtExportProxyCertSecretName = "kubevirt-exportproxy-certs" CABundleKey = "ca-bundle" LocalPodDNStemplateString = "%s.%s.pod.cluster.local" CaClusterLocal = "cluster.local" )
#nosec 101, false positives were caused by variables not holding any secret value.
View Source
const ( ApiServiceAccountName = "kubevirt-apiserver" ControllerServiceAccountName = "kubevirt-controller" ExportProxyServiceAccountName = "kubevirt-exportproxy" HandlerServiceAccountName = "kubevirt-handler" OperatorServiceAccountName = "kubevirt-operator" )
View Source
const (
KUBEVIRT_PROMETHEUS_RULE_NAME = "prometheus-kubevirt-rules"
)
View Source
const KubeVirtCreateValidatePath = "/kubevirt-validate-create"
View Source
const KubeVirtOperatorValidatingWebhookName = "virt-operator-validator"
View Source
const KubeVirtUpdateValidatePath = "/kubevirt-validate-update"
View Source
const KubevirtOperatorWebhookServiceName = "kubevirt-operator-webhook"
View Source
const LauncherEvictionValidatePath = "/launcher-eviction-validate"
View Source
const MigrationCreateValidatePath = "/migration-validate-create"
View Source
const MigrationMutatePath = "/migration-mutate-create"
View Source
const MigrationPolicyCreateValidatePath = "/migration-policy-validate-create"
View Source
const MigrationUpdateValidatePath = "/migration-validate-update"
View Source
const StatusValidatePath = "/status-validate"
View Source
const VMCloneCreateMutatePath = "/vm-clone-mutate-create"
View Source
const VMCloneCreateValidatePath = "/vm-clone-validate-create"
View Source
const VMClusterInstancetypeValidatePath = "/virtualmachineclusterinstancetypes-validate"
View Source
const VMClusterPreferenceValidatePath = "/virtualmachineclusterpreferences-validate"
View Source
const VMExportValidatePath = "/virtualmachineexports-validate"
View Source
const VMICreateValidatePath = "/virtualmachineinstances-validate-create"
View Source
const VMIMutatePath = "/virtualmachineinstances-mutate"
View Source
const VMIPresetValidatePath = "/vmipreset-validate"
View Source
const VMIRSValidatePath = "/virtualmachinereplicaset-validate"
View Source
const VMIUpdateValidatePath = "/virtualmachineinstances-validate-update"
View Source
const VMInstancetypeValidatePath = "/virtualmachineinstancetypes-validate"
View Source
const VMMutatePath = "/virtualmachines-mutate"
View Source
const VMPoolValidatePath = "/virtualmachinepool-validate"
View Source
const VMPreferenceValidatePath = "/virtualmachinepreferences-validate"
View Source
const VMRestoreValidatePath = "/virtualmachinerestores-validate"
View Source
const VMSnapshotValidatePath = "/virtualmachinesnapshots-validate"
View Source
const VMValidatePath = "/virtualmachines-validate"
View Source
const VirtAPIMutatingWebhookName = "virt-api-mutator"
View Source
const VirtAPIValidatingWebhookName = "virt-api-validator"
View Source
const VirtApiServiceName = "virt-api"
View Source
const VirtControllerServiceName = "virt-controller"
View Source
const VirtExportProxyServiceName = "virt-exportproxy"
View Source
const VirtHandlerServiceName = "virt-handler"
View Source
const VirtOperatorServiceName = "kubevirt-operator-webhook"
Variables ¶
View Source
var ( VIRTUALMACHINE = "virtualmachines." + virtv1.VirtualMachineInstanceGroupVersionKind.Group VIRTUALMACHINEINSTANCE = "virtualmachineinstances." + virtv1.VirtualMachineInstanceGroupVersionKind.Group VIRTUALMACHINEINSTANCEPRESET = "virtualmachineinstancepresets." + virtv1.VirtualMachineInstancePresetGroupVersionKind.Group VIRTUALMACHINEINSTANCEREPLICASET = "virtualmachineinstancereplicasets." + virtv1.VirtualMachineInstanceReplicaSetGroupVersionKind.Group VIRTUALMACHINEINSTANCEMIGRATION = "virtualmachineinstancemigrations." + virtv1.VirtualMachineInstanceMigrationGroupVersionKind.Group KUBEVIRT = "kubevirts." + virtv1.KubeVirtGroupVersionKind.Group VIRTUALMACHINEPOOL = "virtualmachinepools." + poolv1.SchemeGroupVersion.Group VIRTUALMACHINESNAPSHOT = "virtualmachinesnapshots." + snapshotv1.SchemeGroupVersion.Group VIRTUALMACHINESNAPSHOTCONTENT = "virtualmachinesnapshotcontents." + snapshotv1.SchemeGroupVersion.Group VIRTUALMACHINEEXPORT = "virtualmachineexports." + exportv1.SchemeGroupVersion.Group MIGRATIONPOLICY = "migrationpolicies." + migrationsv1.MigrationPolicyKind.Group VIRTUALMACHINECLONE = "virtualmachineclones." + clonev1alpha1.VirtualMachineCloneKind.Group PreserveUnknownFieldsFalse = false )
View Source
var CRDsValidation map[string]string = map[string]string{
"datavolumetemplatespec": `openAPIV3Schema:
nullable: true
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest internal
value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this object
represents. Servers may infer this from the endpoint the client submits requests
to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
nullable: true
type: object
x-kubernetes-preserve-unknown-fields: true
spec:
description: DataVolumeSpec contains the DataVolume specification.
properties:
checkpoints:
description: Checkpoints is a list of DataVolumeCheckpoints, representing
stages in a multistage import.
items:
description: DataVolumeCheckpoint defines a stage in a warm migration.
properties:
current:
description: Current is the identifier of the snapshot created for
this checkpoint.
type: string
previous:
description: Previous is the identifier of the snapshot from the previous
checkpoint.
type: string
required:
- current
- previous
type: object
type: array
contentType:
description: 'DataVolumeContentType options: "kubevirt", "archive"'
enum:
- kubevirt
- archive
type: string
finalCheckpoint:
description: FinalCheckpoint indicates whether the current DataVolumeCheckpoint
is the final checkpoint.
type: boolean
preallocation:
description: Preallocation controls whether storage for DataVolumes should
be allocated in advance.
type: boolean
priorityClassName:
description: PriorityClassName for Importer, Cloner and Uploader pod
type: string
pvc:
description: PVC is the PVC specification
properties:
accessModes:
description: 'accessModes contains the desired access modes the volume
should have. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1'
items:
type: string
type: array
dataSource:
description: 'dataSource field can be used to specify either: * An existing
VolumeSnapshot object (snapshot.storage.k8s.io/VolumeSnapshot) * An
existing PVC (PersistentVolumeClaim) If the provisioner or an external
controller can support the specified data source, it will create a
new volume based on the contents of the specified data source. When
the AnyVolumeDataSource feature gate is enabled, dataSource contents
will be copied to dataSourceRef, and dataSourceRef contents will be
copied to dataSource when dataSourceRef.namespace is not specified.
If the namespace is specified, then dataSourceRef will not be copied
to dataSource.'
properties:
apiGroup:
description: APIGroup is the group for the resource being referenced.
If APIGroup is not specified, the specified Kind must be in the
core API group. For any other third-party types, APIGroup is required.
type: string
kind:
description: Kind is the type of resource being referenced
type: string
name:
description: Name is the name of resource being referenced
type: string
required:
- kind
- name
type: object
dataSourceRef:
description: 'dataSourceRef specifies the object from which to populate
the volume with data, if a non-empty volume is desired. This may be
any object from a non-empty API group (non core object) or a PersistentVolumeClaim
object. When this field is specified, volume binding will only succeed
if the type of the specified object matches some installed volume
populator or dynamic provisioner. This field will replace the functionality
of the dataSource field and as such if both fields are non-empty,
they must have the same value. For backwards compatibility, when namespace
isn''t specified in dataSourceRef, both fields (dataSource and dataSourceRef)
will be set to the same value automatically if one of them is empty
and the other is non-empty. When namespace is specified in dataSourceRef,
dataSource isn''t set to the same value and must be empty. There are
three important differences between dataSource and dataSourceRef:
* While dataSource only allows two specific types of objects, dataSourceRef allows
any non-core object, as well as PersistentVolumeClaim objects. * While
dataSource ignores disallowed values (dropping them), dataSourceRef preserves
all values, and generates an error if a disallowed value is specified.
* While dataSource only allows local objects, dataSourceRef allows
objects in any namespaces. (Beta) Using this field requires the
AnyVolumeDataSource feature gate to be enabled. (Alpha) Using the
namespace field of dataSourceRef requires the CrossNamespaceVolumeDataSource
feature gate to be enabled.'
properties:
apiGroup:
description: APIGroup is the group for the resource being referenced.
If APIGroup is not specified, the specified Kind must be in the
core API group. For any other third-party types, APIGroup is required.
type: string
kind:
description: Kind is the type of resource being referenced
type: string
name:
description: Name is the name of resource being referenced
type: string
namespace:
description: Namespace is the namespace of resource being referenced
Note that when a namespace is specified, a gateway.networking.k8s.io/ReferenceGrant
object is required in the referent namespace to allow that namespace's
owner to accept the reference. See the ReferenceGrant documentation
for details. (Alpha) This field requires the CrossNamespaceVolumeDataSource
feature gate to be enabled.
type: string
required:
- kind
- name
type: object
resources:
description: 'resources represents the minimum resources the volume
should have. If RecoverVolumeExpansionFailure feature is enabled users
are allowed to specify resource requirements that are lower than previous
value but must still be higher than capacity recorded in the status
field of the claim. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources'
properties:
claims:
description: "Claims lists the names of resources, defined in spec.resourceClaims,
that are used by this container. \n This is an alpha field and
requires enabling the DynamicResourceAllocation feature gate.
\n This field is immutable. It can only be set for containers."
items:
description: ResourceClaim references one entry in PodSpec.ResourceClaims.
properties:
name:
description: Name must match the name of one entry in pod.spec.resourceClaims
of the Pod where this field is used. It makes that resource
available inside a container.
type: string
required:
- name
type: object
type: array
x-kubernetes-list-map-keys:
- name
x-kubernetes-list-type: map
limits:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: 'Limits describes the maximum amount of compute resources
allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
type: object
requests:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: 'Requests describes the minimum amount of compute resources
required. If Requests is omitted for a container, it defaults
to Limits if that is explicitly specified, otherwise to an implementation-defined
value. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
type: object
type: object
selector:
description: selector is a label query over volumes to consider for
binding.
properties:
matchExpressions:
description: matchExpressions is a list of label selector requirements.
The requirements are ANDed.
items:
description: A label selector requirement is a selector that contains
values, a key, and an operator that relates the key and values.
properties:
key:
description: key is the label key that the selector applies
to.
type: string
operator:
description: operator represents a key's relationship to a
set of values. Valid operators are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array of string values. If the operator
is In or NotIn, the values array must be non-empty. If the
operator is Exists or DoesNotExist, the values array must
be empty. This array is replaced during a strategic merge
patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value} pairs. A single
{key,value} in the matchLabels map is equivalent to an element
of matchExpressions, whose key field is "key", the operator is
"In", and the values array contains only "value". The requirements
are ANDed.
type: object
type: object
storageClassName:
description: 'storageClassName is the name of the StorageClass required
by the claim. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#class-1'
type: string
volumeMode:
description: volumeMode defines what type of volume is required by the
claim. Value of Filesystem is implied when not included in claim spec.
type: string
volumeName:
description: volumeName is the binding reference to the PersistentVolume
backing this claim.
type: string
type: object
source:
description: Source is the src of the data for the requested DataVolume
properties:
blank:
description: DataVolumeBlankImage provides the parameters to create
a new raw blank image for the PVC
type: object
gcs:
description: DataVolumeSourceGCS provides the parameters to create a
Data Volume from an GCS source
properties:
secretRef:
description: SecretRef provides the secret reference needed to access
the GCS source
type: string
url:
description: URL is the url of the GCS source
type: string
required:
- url
type: object
http:
description: DataVolumeSourceHTTP can be either an http or https endpoint,
with an optional basic auth user name and password, and an optional
configmap containing additional CAs
properties:
certConfigMap:
description: CertConfigMap is a configmap reference, containing
a Certificate Authority(CA) public key, and a base64 encoded pem
certificate
type: string
extraHeaders:
description: ExtraHeaders is a list of strings containing extra
headers to include with HTTP transfer requests
items:
type: string
type: array
secretExtraHeaders:
description: SecretExtraHeaders is a list of Secret references,
each containing an extra HTTP header that may include sensitive
information
items:
type: string
type: array
secretRef:
description: SecretRef A Secret reference, the secret should contain
accessKeyId (user name) base64 encoded, and secretKey (password)
also base64 encoded
type: string
url:
description: URL is the URL of the http(s) endpoint
type: string
required:
- url
type: object
imageio:
description: DataVolumeSourceImageIO provides the parameters to create
a Data Volume from an imageio source
properties:
certConfigMap:
description: CertConfigMap provides a reference to the CA cert
type: string
diskId:
description: DiskID provides id of a disk to be imported
type: string
secretRef:
description: SecretRef provides the secret reference needed to access
the ovirt-engine
type: string
url:
description: URL is the URL of the ovirt-engine
type: string
required:
- diskId
- url
type: object
pvc:
description: DataVolumeSourcePVC provides the parameters to create a
Data Volume from an existing PVC
properties:
name:
description: The name of the source PVC
type: string
namespace:
description: The namespace of the source PVC
type: string
required:
- name
- namespace
type: object
registry:
description: DataVolumeSourceRegistry provides the parameters to create
a Data Volume from an registry source
properties:
certConfigMap:
description: CertConfigMap provides a reference to the Registry
certs
type: string
imageStream:
description: ImageStream is the name of image stream for import
type: string
pullMethod:
description: PullMethod can be either "pod" (default import), or
"node" (node docker cache based import)
type: string
secretRef:
description: SecretRef provides the secret reference needed to access
the Registry source
type: string
url:
description: 'URL is the url of the registry source (starting with
the scheme: docker, oci-archive)'
type: string
type: object
s3:
description: DataVolumeSourceS3 provides the parameters to create a
Data Volume from an S3 source
properties:
certConfigMap:
description: CertConfigMap is a configmap reference, containing
a Certificate Authority(CA) public key, and a base64 encoded pem
certificate
type: string
secretRef:
description: SecretRef provides the secret reference needed to access
the S3 source
type: string
url:
description: URL is the url of the S3 source
type: string
required:
- url
type: object
snapshot:
description: DataVolumeSourceSnapshot provides the parameters to create
a Data Volume from an existing VolumeSnapshot
properties:
name:
description: The name of the source VolumeSnapshot
type: string
namespace:
description: The namespace of the source VolumeSnapshot
type: string
required:
- name
- namespace
type: object
upload:
description: DataVolumeSourceUpload provides the parameters to create
a Data Volume by uploading the source
type: object
vddk:
description: DataVolumeSourceVDDK provides the parameters to create
a Data Volume from a Vmware source
properties:
backingFile:
description: BackingFile is the path to the virtual hard disk to
migrate from vCenter/ESXi
type: string
initImageURL:
description: InitImageURL is an optional URL to an image containing
an extracted VDDK library, overrides v2v-vmware config map
type: string
secretRef:
description: SecretRef provides a reference to a secret containing
the username and password needed to access the vCenter or ESXi
host
type: string
thumbprint:
description: Thumbprint is the certificate thumbprint of the vCenter
or ESXi host
type: string
url:
description: URL is the URL of the vCenter or ESXi host with the
VM to migrate
type: string
uuid:
description: UUID is the UUID of the virtual machine that the backing
file is attached to in vCenter/ESXi
type: string
type: object
type: object
sourceRef:
description: SourceRef is an indirect reference to the source of data for
the requested DataVolume
properties:
kind:
description: The kind of the source reference, currently only "DataSource"
is supported
type: string
name:
description: The name of the source reference
type: string
namespace:
description: The namespace of the source reference, defaults to the
DataVolume namespace
type: string
required:
- kind
- name
type: object
storage:
description: Storage is the requested storage specification
properties:
accessModes:
description: 'AccessModes contains the desired access modes the volume
should have. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1'
items:
type: string
type: array
dataSource:
description: 'This field can be used to specify either: * An existing
VolumeSnapshot object (snapshot.storage.k8s.io/VolumeSnapshot) * An
existing PVC (PersistentVolumeClaim) * An existing custom resource
that implements data population (Alpha) In order to use custom resource
types that implement data population, the AnyVolumeDataSource feature
gate must be enabled. If the provisioner or an external controller
can support the specified data source, it will create a new volume
based on the contents of the specified data source. If the AnyVolumeDataSource
feature gate is enabled, this field will always have the same contents
as the DataSourceRef field.'
properties:
apiGroup:
description: APIGroup is the group for the resource being referenced.
If APIGroup is not specified, the specified Kind must be in the
core API group. For any other third-party types, APIGroup is required.
type: string
kind:
description: Kind is the type of resource being referenced
type: string
name:
description: Name is the name of resource being referenced
type: string
required:
- kind
- name
type: object
dataSourceRef:
description: 'Specifies the object from which to populate the volume
with data, if a non-empty volume is desired. This may be any local
object from a non-empty API group (non core object) or a PersistentVolumeClaim
object. When this field is specified, volume binding will only succeed
if the type of the specified object matches some installed volume
populator or dynamic provisioner. This field will replace the functionality
of the DataSource field and as such if both fields are non-empty,
they must have the same value. For backwards compatibility, both fields
(DataSource and DataSourceRef) will be set to the same value automatically
if one of them is empty and the other is non-empty. There are two
important differences between DataSource and DataSourceRef: * While
DataSource only allows two specific types of objects, DataSourceRef
allows any non-core object, as well as PersistentVolumeClaim objects.
* While DataSource ignores disallowed values (dropping them), DataSourceRef
preserves all values, and generates an error if a disallowed value
is specified. (Beta) Using this field requires the AnyVolumeDataSource
feature gate to be enabled.'
properties:
apiGroup:
description: APIGroup is the group for the resource being referenced.
If APIGroup is not specified, the specified Kind must be in the
core API group. For any other third-party types, APIGroup is required.
type: string
kind:
description: Kind is the type of resource being referenced
type: string
name:
description: Name is the name of resource being referenced
type: string
namespace:
description: Namespace is the namespace of resource being referenced
Note that when a namespace is specified, a gateway.networking.k8s.io/ReferenceGrant
object is required in the referent namespace to allow that namespace's
owner to accept the reference. See the ReferenceGrant documentation
for details. (Alpha) This field requires the CrossNamespaceVolumeDataSource
feature gate to be enabled.
type: string
required:
- kind
- name
type: object
resources:
description: 'Resources represents the minimum resources the volume
should have. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources'
properties:
claims:
description: "Claims lists the names of resources, defined in spec.resourceClaims,
that are used by this container. \n This is an alpha field and
requires enabling the DynamicResourceAllocation feature gate.
\n This field is immutable. It can only be set for containers."
items:
description: ResourceClaim references one entry in PodSpec.ResourceClaims.
properties:
name:
description: Name must match the name of one entry in pod.spec.resourceClaims
of the Pod where this field is used. It makes that resource
available inside a container.
type: string
required:
- name
type: object
type: array
x-kubernetes-list-map-keys:
- name
x-kubernetes-list-type: map
limits:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: 'Limits describes the maximum amount of compute resources
allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
type: object
requests:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: 'Requests describes the minimum amount of compute resources
required. If Requests is omitted for a container, it defaults
to Limits if that is explicitly specified, otherwise to an implementation-defined
value. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
type: object
type: object
selector:
description: A label query over volumes to consider for binding.
properties:
matchExpressions:
description: matchExpressions is a list of label selector requirements.
The requirements are ANDed.
items:
description: A label selector requirement is a selector that contains
values, a key, and an operator that relates the key and values.
properties:
key:
description: key is the label key that the selector applies
to.
type: string
operator:
description: operator represents a key's relationship to a
set of values. Valid operators are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array of string values. If the operator
is In or NotIn, the values array must be non-empty. If the
operator is Exists or DoesNotExist, the values array must
be empty. This array is replaced during a strategic merge
patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value} pairs. A single
{key,value} in the matchLabels map is equivalent to an element
of matchExpressions, whose key field is "key", the operator is
"In", and the values array contains only "value". The requirements
are ANDed.
type: object
type: object
storageClassName:
description: 'Name of the StorageClass required by the claim. More info:
https://kubernetes.io/docs/concepts/storage/persistent-volumes#class-1'
type: string
volumeMode:
description: volumeMode defines what type of volume is required by the
claim. Value of Filesystem is implied when not included in claim spec.
type: string
volumeName:
description: VolumeName is the binding reference to the PersistentVolume
backing this claim.
type: string
type: object
type: object
status:
description: DataVolumeTemplateDummyStatus is here simply for backwards compatibility
with a previous API.
nullable: true
type: object
required:
- spec
type: object
`,
"kubevirt": `openAPIV3Schema:
description: KubeVirt represents the object deploying all KubeVirt resources
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest internal
value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this object
represents. Servers may infer this from the endpoint the client submits requests
to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
properties:
certificateRotateStrategy:
properties:
selfSigned:
properties:
ca:
description: CA configuration CA certs are kept in the CA bundle
as long as they are valid
properties:
duration:
description: The requested 'duration' (i.e. lifetime) of the
Certificate.
type: string
renewBefore:
description: The amount of time before the currently issued
certificate's "notAfter" time that we will begin to attempt
to renew the certificate.
type: string
type: object
caOverlapInterval:
description: Deprecated. Use CA.Duration and CA.RenewBefore instead
type: string
caRotateInterval:
description: Deprecated. Use CA.Duration instead
type: string
certRotateInterval:
description: Deprecated. Use Server.Duration instead
type: string
server:
description: Server configuration Certs are rotated and discarded
properties:
duration:
description: The requested 'duration' (i.e. lifetime) of the
Certificate.
type: string
renewBefore:
description: The amount of time before the currently issued
certificate's "notAfter" time that we will begin to attempt
to renew the certificate.
type: string
type: object
type: object
type: object
configuration:
description: holds kubevirt configurations. same as the virt-configMap
properties:
additionalGuestMemoryOverheadRatio:
description: AdditionalGuestMemoryOverheadRatio can be used to increase
the virtualization infrastructure overhead. This is useful, since
the calculation of this overhead is not accurate and cannot be entirely
known in advance. The ratio that is being set determines by which
factor to increase the overhead calculated by Kubevirt. A higher ratio
means that the VMs would be less compromised by node pressures, but
would mean that fewer VMs could be scheduled to a node. If not set,
the default is 1.
type: string
apiConfiguration:
description: ReloadableComponentConfiguration holds all generic k8s
configuration options which can be reloaded by components without
requiring a restart.
properties:
restClient:
description: RestClient can be used to tune certain aspects of the
k8s client in use.
properties:
rateLimiter:
description: RateLimiter allows selecting and configuring different
rate limiters for the k8s client.
properties:
tokenBucketRateLimiter:
properties:
burst:
description: Maximum burst for throttle. If it's zero,
the component default will be used
type: integer
qps:
description: QPS indicates the maximum QPS to the apiserver
from this client. If it's zero, the component default
will be used
type: number
required:
- burst
- qps
type: object
type: object
type: object
type: object
architectureConfiguration:
properties:
amd64:
properties:
emulatedMachines:
items:
type: string
type: array
x-kubernetes-list-type: atomic
machineType:
type: string
ovmfPath:
type: string
type: object
arm64:
properties:
emulatedMachines:
items:
type: string
type: array
x-kubernetes-list-type: atomic
machineType:
type: string
ovmfPath:
type: string
type: object
defaultArchitecture:
type: string
ppc64le:
properties:
emulatedMachines:
items:
type: string
type: array
x-kubernetes-list-type: atomic
machineType:
type: string
ovmfPath:
type: string
type: object
type: object
autoCPULimitNamespaceLabelSelector:
description: When set, AutoCPULimitNamespaceLabelSelector will set a
CPU limit on virt-launcher for VMIs running inside namespaces that
match the label selector. The CPU limit will equal the number of requested
vCPUs. This setting does not apply to VMIs with dedicated CPUs.
properties:
matchExpressions:
description: matchExpressions is a list of label selector requirements.
The requirements are ANDed.
items:
description: A label selector requirement is a selector that contains
values, a key, and an operator that relates the key and values.
properties:
key:
description: key is the label key that the selector applies
to.
type: string
operator:
description: operator represents a key's relationship to a
set of values. Valid operators are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array of string values. If the operator
is In or NotIn, the values array must be non-empty. If the
operator is Exists or DoesNotExist, the values array must
be empty. This array is replaced during a strategic merge
patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value} pairs. A single
{key,value} in the matchLabels map is equivalent to an element
of matchExpressions, whose key field is "key", the operator is
"In", and the values array contains only "value". The requirements
are ANDed.
type: object
type: object
controllerConfiguration:
description: ReloadableComponentConfiguration holds all generic k8s
configuration options which can be reloaded by components without
requiring a restart.
properties:
restClient:
description: RestClient can be used to tune certain aspects of the
k8s client in use.
properties:
rateLimiter:
description: RateLimiter allows selecting and configuring different
rate limiters for the k8s client.
properties:
tokenBucketRateLimiter:
properties:
burst:
description: Maximum burst for throttle. If it's zero,
the component default will be used
type: integer
qps:
description: QPS indicates the maximum QPS to the apiserver
from this client. If it's zero, the component default
will be used
type: number
required:
- burst
- qps
type: object
type: object
type: object
type: object
cpuModel:
type: string
cpuRequest:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
defaultRuntimeClass:
type: string
developerConfiguration:
description: DeveloperConfiguration holds developer options
properties:
cpuAllocationRatio:
description: 'For each requested virtual CPU, CPUAllocationRatio
defines how much physical CPU to request per VMI from the hosting
node. The value is in fraction of a CPU thread (or core on non-hyperthreaded
nodes). For example, a value of 1 means 1 physical CPU thread
per VMI CPU thread. A value of 100 would be 1% of a physical thread
allocated for each requested VMI thread. This option has no effect
on VMIs that request dedicated CPUs. More information at: https://kubevirt.io/user-guide/operations/node_overcommit/#node-cpu-allocation-ratio
Defaults to 10'
type: integer
diskVerification:
description: DiskVerification holds container disks verification
limits
properties:
memoryLimit:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
required:
- memoryLimit
type: object
featureGates:
description: FeatureGates is the list of experimental features to
enable. Defaults to none
items:
type: string
type: array
logVerbosity:
description: LogVerbosity sets log verbosity level of various components
properties:
nodeVerbosity:
additionalProperties:
type: integer
description: NodeVerbosity represents a map of nodes with a
specific verbosity level
type: object
virtAPI:
type: integer
virtController:
type: integer
virtHandler:
type: integer
virtLauncher:
type: integer
virtOperator:
type: integer
type: object
memoryOvercommit:
description: MemoryOvercommit is the percentage of memory we want
to give VMIs compared to the amount given to its parent pod (virt-launcher).
For example, a value of 102 means the VMI will "see" 2% more memory
than its parent pod. Values under 100 are effectively "undercommits".
Overcommits can lead to memory exhaustion, which in turn can lead
to crashes. Use carefully. Defaults to 100
type: integer
minimumClusterTSCFrequency:
description: Allow overriding the automatically determined minimum
TSC frequency of the cluster and fixate the minimum to this frequency.
format: int64
type: integer
minimumReservePVCBytes:
description: MinimumReservePVCBytes is the amount of space, in bytes,
to leave unused on disks. Defaults to 131072 (128KiB)
format: int64
type: integer
nodeSelectors:
additionalProperties:
type: string
description: NodeSelectors allows restricting VMI creation to nodes
that match a set of labels. Defaults to none
type: object
pvcTolerateLessSpaceUpToPercent:
description: LessPVCSpaceToleration determines how much smaller,
in percentage, disk PVCs are allowed to be compared to the requested
size (to account for various overheads). Defaults to 10
type: integer
useEmulation:
description: UseEmulation can be set to true to allow fallback to
software emulation in case hardware-assisted emulation is not
available. Defaults to false
type: boolean
type: object
emulatedMachines:
items:
type: string
type: array
evictionStrategy:
description: EvictionStrategy defines at the cluster level if the VirtualMachineInstance
should be migrated instead of shut-off in case of a node drain. If
the VirtualMachineInstance specific field is set it overrides the
cluster level one.
type: string
handlerConfiguration:
description: ReloadableComponentConfiguration holds all generic k8s
configuration options which can be reloaded by components without
requiring a restart.
properties:
restClient:
description: RestClient can be used to tune certain aspects of the
k8s client in use.
properties:
rateLimiter:
description: RateLimiter allows selecting and configuring different
rate limiters for the k8s client.
properties:
tokenBucketRateLimiter:
properties:
burst:
description: Maximum burst for throttle. If it's zero,
the component default will be used
type: integer
qps:
description: QPS indicates the maximum QPS to the apiserver
from this client. If it's zero, the component default
will be used
type: number
required:
- burst
- qps
type: object
type: object
type: object
type: object
imagePullPolicy:
description: PullPolicy describes a policy for if/when to pull a container
image
type: string
ksmConfiguration:
description: KSMConfiguration holds the information regarding the enabling
the KSM in the nodes (if available).
properties:
nodeLabelSelector:
description: NodeLabelSelector is a selector that filters in which
nodes the KSM will be enabled. Empty NodeLabelSelector will enable
ksm for every node.
properties:
matchExpressions:
description: matchExpressions is a list of label selector requirements.
The requirements are ANDed.
items:
description: A label selector requirement is a selector that
contains values, a key, and an operator that relates the
key and values.
properties:
key:
description: key is the label key that the selector applies
to.
type: string
operator:
description: operator represents a key's relationship
to a set of values. Valid operators are In, NotIn, Exists
and DoesNotExist.
type: string
values:
description: values is an array of string values. If the
operator is In or NotIn, the values array must be non-empty.
If the operator is Exists or DoesNotExist, the values
array must be empty. This array is replaced during a
strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value} pairs. A single
{key,value} in the matchLabels map is equivalent to an element
of matchExpressions, whose key field is "key", the operator
is "In", and the values array contains only "value". The requirements
are ANDed.
type: object
type: object
type: object
liveUpdateConfiguration:
description: LiveUpdateConfiguration holds defaults for live update
features
properties:
maxCpuSockets:
description: MaxCpuSockets holds the maximum amount of sockets that
can be hotplugged
format: int32
type: integer
maxGuest:
anyOf:
- type: integer
- type: string
description: MaxGuest defines the maximum amount memory that can
be allocated to the guest using hotplug.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
maxHotplugRatio:
description: 'MaxHotplugRatio is the ratio used to define the max
amount of a hotplug resource that can be made available to a VM
when the specific Max* setting is not defined (MaxCpuSockets,
MaxGuest) Example: VM is configured with 512Mi of guest memory,
if MaxGuest is not defined and MaxHotplugRatio is 2 then MaxGuest
= 1Gi defaults to 4'
format: int32
type: integer
type: object
machineType:
description: Deprecated. Use architectureConfiguration instead.
type: string
mediatedDevicesConfiguration:
description: MediatedDevicesConfiguration holds information about MDEV
types to be defined, if available
properties:
mediatedDeviceTypes:
items:
type: string
type: array
x-kubernetes-list-type: atomic
mediatedDevicesTypes:
description: Deprecated. Use mediatedDeviceTypes instead.
items:
type: string
type: array
x-kubernetes-list-type: atomic
nodeMediatedDeviceTypes:
items:
description: NodeMediatedDeviceTypesConfig holds information about
MDEV types to be defined in a specific node that matches the
NodeSelector field.
properties:
mediatedDeviceTypes:
items:
type: string
type: array
x-kubernetes-list-type: atomic
mediatedDevicesTypes:
description: Deprecated. Use mediatedDeviceTypes instead.
items:
type: string
type: array
x-kubernetes-list-type: atomic
nodeSelector:
additionalProperties:
type: string
description: 'NodeSelector is a selector which must be true
for the vmi to fit on a node. Selector which must match
a node''s labels for the vmi to be scheduled on that node.
More info: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/'
type: object
required:
- nodeSelector
type: object
type: array
x-kubernetes-list-type: atomic
type: object
memBalloonStatsPeriod:
format: int32
type: integer
migrations:
description: MigrationConfiguration holds migration options. Can be
overridden for specific groups of VMs though migration policies. Visit
https://kubevirt.io/user-guide/operations/migration_policies/ for
more information.
properties:
allowAutoConverge:
description: AllowAutoConverge allows the platform to compromise
performance/availability of VMIs to guarantee successful VMI live
migrations. Defaults to false
type: boolean
allowPostCopy:
description: AllowPostCopy enables post-copy live migrations. Such
migrations allow even the busiest VMIs to successfully live-migrate.
However, events like a network failure can cause a VMI crash.
If set to true, migrations will still start in pre-copy, but switch
to post-copy when CompletionTimeoutPerGiB triggers. Defaults to
false
type: boolean
bandwidthPerMigration:
anyOf:
- type: integer
- type: string
description: BandwidthPerMigration limits the amount of network
bandwidth live migrations are allowed to use. The value is in
quantity per second. Defaults to 0 (no limit)
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
completionTimeoutPerGiB:
description: CompletionTimeoutPerGiB is the maximum number of seconds
per GiB a migration is allowed to take. If a live-migration takes
longer to migrate than this value multiplied by the size of the
VMI, the migration will be cancelled, unless AllowPostCopy is
true. Defaults to 800
format: int64
type: integer
disableTLS:
description: When set to true, DisableTLS will disable the additional
layer of live migration encryption provided by KubeVirt. This
is usually a bad idea. Defaults to false
type: boolean
matchSELinuxLevelOnMigration:
description: By default, the SELinux level of target virt-launcher
pods is forced to the level of the source virt-launcher. When
set to true, MatchSELinuxLevelOnMigration lets the CRI auto-assign
a random level to the target. That will ensure the target virt-launcher
doesn't share categories with another pod on the node. However,
migrations will fail when using RWX volumes that don't automatically
deal with SELinux levels.
type: boolean
network:
description: Network is the name of the CNI network to use for live
migrations. By default, migrations go through the pod network.
type: string
nodeDrainTaintKey:
description: 'NodeDrainTaintKey defines the taint key that indicates
a node should be drained. Note: this option relies on the deprecated
node taint feature. Default: kubevirt.io/drain'
type: string
parallelMigrationsPerCluster:
description: ParallelMigrationsPerCluster is the total number of
concurrent live migrations allowed cluster-wide. Defaults to 5
format: int32
type: integer
parallelOutboundMigrationsPerNode:
description: ParallelOutboundMigrationsPerNode is the maximum number
of concurrent outgoing live migrations allowed per node. Defaults
to 2
format: int32
type: integer
progressTimeout:
description: ProgressTimeout is the maximum number of seconds a
live migration is allowed to make no progress. Hitting this timeout
means a migration transferred 0 data for that many seconds. The
migration is then considered stuck and therefore cancelled. Defaults
to 150
format: int64
type: integer
unsafeMigrationOverride:
description: UnsafeMigrationOverride allows live migrations to occur
even if the compatibility check indicates the migration will be
unsafe to the guest. Defaults to false
type: boolean
type: object
minCPUModel:
type: string
network:
description: NetworkConfiguration holds network options
properties:
binding:
additionalProperties:
properties:
domainAttachmentType:
description: 'DomainAttachmentType is a standard domain network
attachment method kubevirt supports. Supported values: "tap".
The standard domain attachment can be used instead or in
addition to the sidecarImage. version: 1alphav1'
type: string
migration:
description: 'Migration means the VM using the plugin can
be safely migrated version: 1alphav1'
properties:
method:
description: 'Method defines a pre-defined migration methodology
version: 1alphav1'
type: string
type: object
networkAttachmentDefinition:
description: 'NetworkAttachmentDefinition references to a
NetworkAttachmentDefinition CR object. Format: <name>, <namespace>/<name>.
If namespace is not specified, VMI namespace is assumed.
version: 1alphav1'
type: string
sidecarImage:
description: 'SidecarImage references a container image that
runs in the virt-launcher pod. The sidecar handles (libvirt)
domain configuration and optional services. version: 1alphav1'
type: string
type: object
type: object
defaultNetworkInterface:
type: string
permitBridgeInterfaceOnPodNetwork:
type: boolean
permitSlirpInterface:
type: boolean
type: object
obsoleteCPUModels:
additionalProperties:
type: boolean
type: object
ovmfPath:
type: string
permittedHostDevices:
description: PermittedHostDevices holds information about devices allowed
for passthrough
properties:
mediatedDevices:
items:
description: MediatedHostDevice represents a host mediated device
allowed for passthrough
properties:
externalResourceProvider:
type: boolean
mdevNameSelector:
type: string
resourceName:
type: string
required:
- mdevNameSelector
- resourceName
type: object
type: array
x-kubernetes-list-type: atomic
pciHostDevices:
items:
description: PciHostDevice represents a host PCI device allowed
for passthrough
properties:
externalResourceProvider:
description: If true, KubeVirt will leave the allocation and
monitoring to an external device plugin
type: boolean
pciVendorSelector:
description: The vendor_id:product_id tuple of the PCI device
type: string
resourceName:
description: The name of the resource that is representing
the device. Exposed by a device plugin and requested by
VMs. Typically of the form vendor.com/product_name
type: string
required:
- pciVendorSelector
- resourceName
type: object
type: array
x-kubernetes-list-type: atomic
usb:
items:
properties:
externalResourceProvider:
description: If true, KubeVirt will leave the allocation and
monitoring to an external device plugin
type: boolean
resourceName:
description: 'Identifies the list of USB host devices. e.g:
kubevirt.io/storage, kubevirt.io/bootable-usb, etc'
type: string
selectors:
items:
properties:
product:
type: string
vendor:
type: string
required:
- product
- vendor
type: object
type: array
x-kubernetes-list-type: atomic
required:
- resourceName
type: object
type: array
x-kubernetes-list-type: atomic
type: object
seccompConfiguration:
description: SeccompConfiguration holds Seccomp configuration for Kubevirt
components
properties:
virtualMachineInstanceProfile:
description: VirtualMachineInstanceProfile defines what profile
should be used with virt-launcher. Defaults to none
properties:
customProfile:
description: CustomProfile allows to request arbitrary profile
for virt-launcher
properties:
localhostProfile:
type: string
runtimeDefaultProfile:
type: boolean
type: object
type: object
type: object
selinuxLauncherType:
type: string
smbios:
properties:
family:
type: string
manufacturer:
type: string
product:
type: string
sku:
type: string
version:
type: string
type: object
supportContainerResources:
description: SupportContainerResources specifies the resource requirements
for various types of supporting containers such as container disks/virtiofs/sidecars
and hotplug attachment pods. If omitted a sensible default will be
supplied.
items:
description: SupportContainerResources are used to specify the cpu/memory
request and limits for the containers that support various features
of Virtual Machines. These containers are usually idle and don't
require a lot of memory or cpu.
properties:
resources:
description: ResourceRequirements describes the compute resource
requirements.
properties:
claims:
description: "Claims lists the names of resources, defined
in spec.resourceClaims, that are used by this container.
\n This is an alpha field and requires enabling the DynamicResourceAllocation
feature gate. \n This field is immutable. It can only be
set for containers."
items:
description: ResourceClaim references one entry in PodSpec.ResourceClaims.
properties:
name:
description: Name must match the name of one entry in
pod.spec.resourceClaims of the Pod where this field
is used. It makes that resource available inside a
container.
type: string
required:
- name
type: object
type: array
x-kubernetes-list-map-keys:
- name
x-kubernetes-list-type: map
limits:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: 'Limits describes the maximum amount of compute
resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
type: object
requests:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: 'Requests describes the minimum amount of compute
resources required. If Requests is omitted for a container,
it defaults to Limits if that is explicitly specified, otherwise
to an implementation-defined value. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
type: object
type: object
type:
type: string
required:
- resources
- type
type: object
type: array
x-kubernetes-list-map-keys:
- type
x-kubernetes-list-type: map
supportedGuestAgentVersions:
description: deprecated
items:
type: string
type: array
tlsConfiguration:
description: TLSConfiguration holds TLS options
properties:
ciphers:
items:
type: string
type: array
x-kubernetes-list-type: set
minTLSVersion:
description: "MinTLSVersion is a way to specify the minimum protocol
version that is acceptable for TLS connections. Protocol versions
are based on the following most common TLS configurations: \n
\ https://ssl-config.mozilla.org/ \n Note that SSLv3.0 is not
a supported protocol version due to well known vulnerabilities
such as POODLE: https://en.wikipedia.org/wiki/POODLE"
enum:
- VersionTLS10
- VersionTLS11
- VersionTLS12
- VersionTLS13
type: string
type: object
virtualMachineInstancesPerNode:
type: integer
virtualMachineOptions:
description: VirtualMachineOptions holds the cluster level information
regarding the virtual machine.
properties:
disableFreePageReporting:
description: DisableFreePageReporting disable the free page reporting
of memory balloon device https://libvirt.org/formatdomain.html#memory-balloon-device.
This will have effect only if AutoattachMemBalloon is not false
and the vmi is not requesting any high performance feature (dedicatedCPU/realtime/hugePages),
in which free page reporting is always disabled.
type: object
disableSerialConsoleLog:
description: DisableSerialConsoleLog disables logging the auto-attached
default serial console. If not set, serial console logs will be
written to a file and then streamed from a container named 'guest-console-log'.
The value can be individually overridden for each VM, not relevant
if AutoattachSerialConsole is disabled.
type: object
type: object
vmRolloutStrategy:
description: VMRolloutStrategy defines how changes to a VM object propagate
to its VMI
enum:
- Stage
- LiveUpdate
nullable: true
type: string
vmStateStorageClass:
description: VMStateStorageClass is the name of the storage class to
use for the PVCs created to preserve VM state, like TPM. The storage
class must support RWX in filesystem mode.
type: string
webhookConfiguration:
description: ReloadableComponentConfiguration holds all generic k8s
configuration options which can be reloaded by components without
requiring a restart.
properties:
restClient:
description: RestClient can be used to tune certain aspects of the
k8s client in use.
properties:
rateLimiter:
description: RateLimiter allows selecting and configuring different
rate limiters for the k8s client.
properties:
tokenBucketRateLimiter:
properties:
burst:
description: Maximum burst for throttle. If it's zero,
the component default will be used
type: integer
qps:
description: QPS indicates the maximum QPS to the apiserver
from this client. If it's zero, the component default
will be used
type: number
required:
- burst
- qps
type: object
type: object
type: object
type: object
type: object
customizeComponents:
properties:
flags:
description: Configure the value used for deployment and daemonset resources
properties:
api:
additionalProperties:
type: string
type: object
controller:
additionalProperties:
type: string
type: object
handler:
additionalProperties:
type: string
type: object
type: object
patches:
items:
properties:
patch:
type: string
resourceName:
minLength: 1
type: string
resourceType:
minLength: 1
type: string
type:
type: string
required:
- patch
- resourceName
- resourceType
- type
type: object
type: array
x-kubernetes-list-type: atomic
type: object
imagePullPolicy:
description: The ImagePullPolicy to use.
type: string
imagePullSecrets:
description: The imagePullSecrets to pull the container images from Defaults
to none
items:
description: LocalObjectReference contains enough information to let you
locate the referenced object inside the same namespace.
properties:
name:
description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind, uid?'
type: string
type: object
type: array
x-kubernetes-list-type: atomic
imageRegistry:
description: The image registry to pull the container images from Defaults
to the same registry the operator's container image is pulled from.
type: string
imageTag:
description: The image tag to use for the continer images installed. Defaults
to the same tag as the operator's container image.
type: string
infra:
description: selectors and tolerations that should apply to KubeVirt infrastructure
components
properties:
nodePlacement:
description: nodePlacement describes scheduling configuration for specific
KubeVirt components
properties:
affinity:
description: affinity enables pod affinity/anti-affinity placement
expanding the types of constraints that can be expressed with
nodeSelector. affinity is going to be applied to the relevant
kind of pods in parallel with nodeSelector See https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#affinity-and-anti-affinity
properties:
nodeAffinity:
description: Describes node affinity scheduling rules for the
pod.
properties:
preferredDuringSchedulingIgnoredDuringExecution:
description: The scheduler will prefer to schedule pods
to nodes that satisfy the affinity expressions specified
by this field, but it may choose a node that violates
one or more of the expressions. The node that is most
preferred is the one with the greatest sum of weights,
i.e. for each node that meets all of the scheduling requirements
(resource request, requiredDuringScheduling affinity expressions,
etc.), compute a sum by iterating through the elements
of this field and adding "weight" to the sum if the node
matches the corresponding matchExpressions; the node(s)
with the highest sum are the most preferred.
items:
description: An empty preferred scheduling term matches
all objects with implicit weight 0 (i.e. it's a no-op).
A null preferred scheduling term matches no objects
(i.e. is also a no-op).
properties:
preference:
description: A node selector term, associated with
the corresponding weight.
properties:
matchExpressions:
description: A list of node selector requirements
by node's labels.
items:
description: A node selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: The label key that the selector
applies to.
type: string
operator:
description: Represents a key's relationship
to a set of values. Valid operators are
In, NotIn, Exists, DoesNotExist. Gt, and
Lt.
type: string
values:
description: An array of string values.
If the operator is In or NotIn, the values
array must be non-empty. If the operator
is Exists or DoesNotExist, the values
array must be empty. If the operator is
Gt or Lt, the values array must have a
single element, which will be interpreted
as an integer. This array is replaced
during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchFields:
description: A list of node selector requirements
by node's fields.
items:
description: A node selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: The label key that the selector
applies to.
type: string
operator:
description: Represents a key's relationship
to a set of values. Valid operators are
In, NotIn, Exists, DoesNotExist. Gt, and
Lt.
type: string
values:
description: An array of string values.
If the operator is In or NotIn, the values
array must be non-empty. If the operator
is Exists or DoesNotExist, the values
array must be empty. If the operator is
Gt or Lt, the values array must have a
single element, which will be interpreted
as an integer. This array is replaced
during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
type: object
weight:
description: Weight associated with matching the corresponding
nodeSelectorTerm, in the range 1-100.
format: int32
type: integer
required:
- preference
- weight
type: object
type: array
requiredDuringSchedulingIgnoredDuringExecution:
description: If the affinity requirements specified by this
field are not met at scheduling time, the pod will not
be scheduled onto the node. If the affinity requirements
specified by this field cease to be met at some point
during pod execution (e.g. due to an update), the system
may or may not try to eventually evict the pod from its
node.
properties:
nodeSelectorTerms:
description: Required. A list of node selector terms.
The terms are ORed.
items:
description: A null or empty node selector term matches
no objects. The requirements of them are ANDed.
The TopologySelectorTerm type implements a subset
of the NodeSelectorTerm.
properties:
matchExpressions:
description: A list of node selector requirements
by node's labels.
items:
description: A node selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: The label key that the selector
applies to.
type: string
operator:
description: Represents a key's relationship
to a set of values. Valid operators are
In, NotIn, Exists, DoesNotExist. Gt, and
Lt.
type: string
values:
description: An array of string values.
If the operator is In or NotIn, the values
array must be non-empty. If the operator
is Exists or DoesNotExist, the values
array must be empty. If the operator is
Gt or Lt, the values array must have a
single element, which will be interpreted
as an integer. This array is replaced
during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchFields:
description: A list of node selector requirements
by node's fields.
items:
description: A node selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: The label key that the selector
applies to.
type: string
operator:
description: Represents a key's relationship
to a set of values. Valid operators are
In, NotIn, Exists, DoesNotExist. Gt, and
Lt.
type: string
values:
description: An array of string values.
If the operator is In or NotIn, the values
array must be non-empty. If the operator
is Exists or DoesNotExist, the values
array must be empty. If the operator is
Gt or Lt, the values array must have a
single element, which will be interpreted
as an integer. This array is replaced
during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
type: object
type: array
required:
- nodeSelectorTerms
type: object
type: object
podAffinity:
description: Describes pod affinity scheduling rules (e.g. co-locate
this pod in the same node, zone, etc. as some other pod(s)).
properties:
preferredDuringSchedulingIgnoredDuringExecution:
description: The scheduler will prefer to schedule pods
to nodes that satisfy the affinity expressions specified
by this field, but it may choose a node that violates
one or more of the expressions. The node that is most
preferred is the one with the greatest sum of weights,
i.e. for each node that meets all of the scheduling requirements
(resource request, requiredDuringScheduling affinity expressions,
etc.), compute a sum by iterating through the elements
of this field and adding "weight" to the sum if the node
has pods which matches the corresponding podAffinityTerm;
the node(s) with the highest sum are the most preferred.
items:
description: The weights of all of the matched WeightedPodAffinityTerm
fields are added per-node to find the most preferred
node(s)
properties:
podAffinityTerm:
description: Required. A pod affinity term, associated
with the corresponding weight.
properties:
labelSelector:
description: A label query over a set of resources,
in this case pods.
properties:
matchExpressions:
description: matchExpressions is a list of
label selector requirements. The requirements
are ANDed.
items:
description: A label selector requirement
is a selector that contains values, a
key, and an operator that relates the
key and values.
properties:
key:
description: key is the label key that
the selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty.
If the operator is Exists or DoesNotExist,
the values array must be empty. This
array is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is
"In", and the values array contains only
"value". The requirements are ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set of namespaces
that the term applies to. The term is applied
to the union of the namespaces selected by this
field and the ones listed in the namespaces
field. null selector and null or empty namespaces
list means "this pod's namespace". An empty
selector ({}) matches all namespaces.
properties:
matchExpressions:
description: matchExpressions is a list of
label selector requirements. The requirements
are ANDed.
items:
description: A label selector requirement
is a selector that contains values, a
key, and an operator that relates the
key and values.
properties:
key:
description: key is the label key that
the selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty.
If the operator is Exists or DoesNotExist,
the values array must be empty. This
array is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is
"In", and the values array contains only
"value". The requirements are ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static list
of namespace names that the term applies to.
The term is applied to the union of the namespaces
listed in this field and the ones selected by
namespaceSelector. null or empty namespaces
list and null namespaceSelector means "this
pod's namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located (affinity)
or not co-located (anti-affinity) with the pods
matching the labelSelector in the specified
namespaces, where co-located is defined as running
on a node whose value of the label with key
topologyKey matches that of any node on which
any of the selected pods is running. Empty topologyKey
is not allowed.
type: string
required:
- topologyKey
type: object
weight:
description: weight associated with matching the corresponding
podAffinityTerm, in the range 1-100.
format: int32
type: integer
required:
- podAffinityTerm
- weight
type: object
type: array
requiredDuringSchedulingIgnoredDuringExecution:
description: If the affinity requirements specified by this
field are not met at scheduling time, the pod will not
be scheduled onto the node. If the affinity requirements
specified by this field cease to be met at some point
during pod execution (e.g. due to a pod label update),
the system may or may not try to eventually evict the
pod from its node. When there are multiple elements, the
lists of nodes corresponding to each podAffinityTerm are
intersected, i.e. all terms must be satisfied.
items:
description: Defines a set of pods (namely those matching
the labelSelector relative to the given namespace(s))
that this pod should be co-located (affinity) or not
co-located (anti-affinity) with, where co-located is
defined as running on a node whose value of the label
with key <topologyKey> matches that of any node on which
a pod of the set of pods is running
properties:
labelSelector:
description: A label query over a set of resources,
in this case pods.
properties:
matchExpressions:
description: matchExpressions is a list of label
selector requirements. The requirements are
ANDed.
items:
description: A label selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: key is the label key that the
selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty. If
the operator is Exists or DoesNotExist,
the values array must be empty. This array
is replaced during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is "In",
and the values array contains only "value".
The requirements are ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set of namespaces
that the term applies to. The term is applied to
the union of the namespaces selected by this field
and the ones listed in the namespaces field. null
selector and null or empty namespaces list means
"this pod's namespace". An empty selector ({}) matches
all namespaces.
properties:
matchExpressions:
description: matchExpressions is a list of label
selector requirements. The requirements are
ANDed.
items:
description: A label selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: key is the label key that the
selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty. If
the operator is Exists or DoesNotExist,
the values array must be empty. This array
is replaced during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is "In",
and the values array contains only "value".
The requirements are ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static list of
namespace names that the term applies to. The term
is applied to the union of the namespaces listed
in this field and the ones selected by namespaceSelector.
null or empty namespaces list and null namespaceSelector
means "this pod's namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located (affinity)
or not co-located (anti-affinity) with the pods
matching the labelSelector in the specified namespaces,
where co-located is defined as running on a node
whose value of the label with key topologyKey matches
that of any node on which any of the selected pods
is running. Empty topologyKey is not allowed.
type: string
required:
- topologyKey
type: object
type: array
type: object
podAntiAffinity:
description: Describes pod anti-affinity scheduling rules (e.g.
avoid putting this pod in the same node, zone, etc. as some
other pod(s)).
properties:
preferredDuringSchedulingIgnoredDuringExecution:
description: The scheduler will prefer to schedule pods
to nodes that satisfy the anti-affinity expressions specified
by this field, but it may choose a node that violates
one or more of the expressions. The node that is most
preferred is the one with the greatest sum of weights,
i.e. for each node that meets all of the scheduling requirements
(resource request, requiredDuringScheduling anti-affinity
expressions, etc.), compute a sum by iterating through
the elements of this field and adding "weight" to the
sum if the node has pods which matches the corresponding
podAffinityTerm; the node(s) with the highest sum are
the most preferred.
items:
description: The weights of all of the matched WeightedPodAffinityTerm
fields are added per-node to find the most preferred
node(s)
properties:
podAffinityTerm:
description: Required. A pod affinity term, associated
with the corresponding weight.
properties:
labelSelector:
description: A label query over a set of resources,
in this case pods.
properties:
matchExpressions:
description: matchExpressions is a list of
label selector requirements. The requirements
are ANDed.
items:
description: A label selector requirement
is a selector that contains values, a
key, and an operator that relates the
key and values.
properties:
key:
description: key is the label key that
the selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty.
If the operator is Exists or DoesNotExist,
the values array must be empty. This
array is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is
"In", and the values array contains only
"value". The requirements are ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set of namespaces
that the term applies to. The term is applied
to the union of the namespaces selected by this
field and the ones listed in the namespaces
field. null selector and null or empty namespaces
list means "this pod's namespace". An empty
selector ({}) matches all namespaces.
properties:
matchExpressions:
description: matchExpressions is a list of
label selector requirements. The requirements
are ANDed.
items:
description: A label selector requirement
is a selector that contains values, a
key, and an operator that relates the
key and values.
properties:
key:
description: key is the label key that
the selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty.
If the operator is Exists or DoesNotExist,
the values array must be empty. This
array is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is
"In", and the values array contains only
"value". The requirements are ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static list
of namespace names that the term applies to.
The term is applied to the union of the namespaces
listed in this field and the ones selected by
namespaceSelector. null or empty namespaces
list and null namespaceSelector means "this
pod's namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located (affinity)
or not co-located (anti-affinity) with the pods
matching the labelSelector in the specified
namespaces, where co-located is defined as running
on a node whose value of the label with key
topologyKey matches that of any node on which
any of the selected pods is running. Empty topologyKey
is not allowed.
type: string
required:
- topologyKey
type: object
weight:
description: weight associated with matching the corresponding
podAffinityTerm, in the range 1-100.
format: int32
type: integer
required:
- podAffinityTerm
- weight
type: object
type: array
requiredDuringSchedulingIgnoredDuringExecution:
description: If the anti-affinity requirements specified
by this field are not met at scheduling time, the pod
will not be scheduled onto the node. If the anti-affinity
requirements specified by this field cease to be met at
some point during pod execution (e.g. due to a pod label
update), the system may or may not try to eventually evict
the pod from its node. When there are multiple elements,
the lists of nodes corresponding to each podAffinityTerm
are intersected, i.e. all terms must be satisfied.
items:
description: Defines a set of pods (namely those matching
the labelSelector relative to the given namespace(s))
that this pod should be co-located (affinity) or not
co-located (anti-affinity) with, where co-located is
defined as running on a node whose value of the label
with key <topologyKey> matches that of any node on which
a pod of the set of pods is running
properties:
labelSelector:
description: A label query over a set of resources,
in this case pods.
properties:
matchExpressions:
description: matchExpressions is a list of label
selector requirements. The requirements are
ANDed.
items:
description: A label selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: key is the label key that the
selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty. If
the operator is Exists or DoesNotExist,
the values array must be empty. This array
is replaced during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is "In",
and the values array contains only "value".
The requirements are ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set of namespaces
that the term applies to. The term is applied to
the union of the namespaces selected by this field
and the ones listed in the namespaces field. null
selector and null or empty namespaces list means
"this pod's namespace". An empty selector ({}) matches
all namespaces.
properties:
matchExpressions:
description: matchExpressions is a list of label
selector requirements. The requirements are
ANDed.
items:
description: A label selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: key is the label key that the
selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty. If
the operator is Exists or DoesNotExist,
the values array must be empty. This array
is replaced during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is "In",
and the values array contains only "value".
The requirements are ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static list of
namespace names that the term applies to. The term
is applied to the union of the namespaces listed
in this field and the ones selected by namespaceSelector.
null or empty namespaces list and null namespaceSelector
means "this pod's namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located (affinity)
or not co-located (anti-affinity) with the pods
matching the labelSelector in the specified namespaces,
where co-located is defined as running on a node
whose value of the label with key topologyKey matches
that of any node on which any of the selected pods
is running. Empty topologyKey is not allowed.
type: string
required:
- topologyKey
type: object
type: array
type: object
type: object
nodeSelector:
additionalProperties:
type: string
description: 'nodeSelector is the node selector applied to the relevant
kind of pods It specifies a map of key-value pairs: for the pod
to be eligible to run on a node, the node must have each of the
indicated key-value pairs as labels (it can have additional labels
as well). See https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#nodeselector'
type: object
tolerations:
description: tolerations is a list of tolerations applied to the
relevant kind of pods See https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
for more info. These are additional tolerations other than default
ones.
items:
description: The pod this Toleration is attached to tolerates
any taint that matches the triple <key,value,effect> using the
matching operator <operator>.
properties:
effect:
description: Effect indicates the taint effect to match. Empty
means match all taint effects. When specified, allowed values
are NoSchedule, PreferNoSchedule and NoExecute.
type: string
key:
description: Key is the taint key that the toleration applies
to. Empty means match all taint keys. If the key is empty,
operator must be Exists; this combination means to match
all values and all keys.
type: string
operator:
description: Operator represents a key's relationship to the
value. Valid operators are Exists and Equal. Defaults to
Equal. Exists is equivalent to wildcard for value, so that
a pod can tolerate all taints of a particular category.
type: string
tolerationSeconds:
description: TolerationSeconds represents the period of time
the toleration (which must be of effect NoExecute, otherwise
this field is ignored) tolerates the taint. By default,
it is not set, which means tolerate the taint forever (do
not evict). Zero and negative values will be treated as
0 (evict immediately) by the system.
format: int64
type: integer
value:
description: Value is the taint value the toleration matches
to. If the operator is Exists, the value should be empty,
otherwise just a regular string.
type: string
type: object
type: array
type: object
replicas:
description: 'replicas indicates how many replicas should be created
for each KubeVirt infrastructure component (like virt-api or virt-controller).
Defaults to 2. WARNING: this is an advanced feature that prevents
auto-scaling for core kubevirt components. Please use with caution!'
type: integer
type: object
monitorAccount:
description: The name of the Prometheus service account that needs read-access
to KubeVirt endpoints Defaults to prometheus-k8s
type: string
monitorNamespace:
description: The namespace Prometheus is deployed in Defaults to openshift-monitor
type: string
productComponent:
description: Designate the apps.kubevirt.io/component label for KubeVirt
components. Useful if KubeVirt is included as part of a product. If ProductComponent
is not specified, the component label default value is kubevirt.
type: string
productName:
description: Designate the apps.kubevirt.io/part-of label for KubeVirt components.
Useful if KubeVirt is included as part of a product. If ProductName is
not specified, the part-of label will be omitted.
type: string
productVersion:
description: Designate the apps.kubevirt.io/version label for KubeVirt components.
Useful if KubeVirt is included as part of a product. If ProductVersion
is not specified, KubeVirt's version will be used.
type: string
serviceMonitorNamespace:
description: The namespace the service monitor will be deployed When ServiceMonitorNamespace
is set, then we'll install the service monitor object in that namespace
otherwise we will use the monitoring namespace.
type: string
uninstallStrategy:
description: Specifies if kubevirt can be deleted if workloads are still
present. This is mainly a precaution to avoid accidental data loss
type: string
workloadUpdateStrategy:
description: WorkloadUpdateStrategy defines at the cluster level how to
handle automated workload updates
properties:
batchEvictionInterval:
description: "BatchEvictionInterval Represents the interval to wait
before issuing the next batch of shutdowns \n Defaults to 1 minute"
type: string
batchEvictionSize:
description: "BatchEvictionSize Represents the number of VMIs that can
be forced updated per the BatchShutdownInteral interval \n Defaults
to 10"
type: integer
workloadUpdateMethods:
description: "WorkloadUpdateMethods defines the methods that can be
used to disrupt workloads during automated workload updates. When
multiple methods are present, the least disruptive method takes precedence
over more disruptive methods. For example if both LiveMigrate and
Shutdown methods are listed, only VMs which are not live migratable
will be restarted/shutdown \n An empty list defaults to no automated
workload updating"
items:
type: string
type: array
x-kubernetes-list-type: atomic
type: object
workloads:
description: selectors and tolerations that should apply to KubeVirt workloads
properties:
nodePlacement:
description: nodePlacement describes scheduling configuration for specific
KubeVirt components
properties:
affinity:
description: affinity enables pod affinity/anti-affinity placement
expanding the types of constraints that can be expressed with
nodeSelector. affinity is going to be applied to the relevant
kind of pods in parallel with nodeSelector See https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#affinity-and-anti-affinity
properties:
nodeAffinity:
description: Describes node affinity scheduling rules for the
pod.
properties:
preferredDuringSchedulingIgnoredDuringExecution:
description: The scheduler will prefer to schedule pods
to nodes that satisfy the affinity expressions specified
by this field, but it may choose a node that violates
one or more of the expressions. The node that is most
preferred is the one with the greatest sum of weights,
i.e. for each node that meets all of the scheduling requirements
(resource request, requiredDuringScheduling affinity expressions,
etc.), compute a sum by iterating through the elements
of this field and adding "weight" to the sum if the node
matches the corresponding matchExpressions; the node(s)
with the highest sum are the most preferred.
items:
description: An empty preferred scheduling term matches
all objects with implicit weight 0 (i.e. it's a no-op).
A null preferred scheduling term matches no objects
(i.e. is also a no-op).
properties:
preference:
description: A node selector term, associated with
the corresponding weight.
properties:
matchExpressions:
description: A list of node selector requirements
by node's labels.
items:
description: A node selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: The label key that the selector
applies to.
type: string
operator:
description: Represents a key's relationship
to a set of values. Valid operators are
In, NotIn, Exists, DoesNotExist. Gt, and
Lt.
type: string
values:
description: An array of string values.
If the operator is In or NotIn, the values
array must be non-empty. If the operator
is Exists or DoesNotExist, the values
array must be empty. If the operator is
Gt or Lt, the values array must have a
single element, which will be interpreted
as an integer. This array is replaced
during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchFields:
description: A list of node selector requirements
by node's fields.
items:
description: A node selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: The label key that the selector
applies to.
type: string
operator:
description: Represents a key's relationship
to a set of values. Valid operators are
In, NotIn, Exists, DoesNotExist. Gt, and
Lt.
type: string
values:
description: An array of string values.
If the operator is In or NotIn, the values
array must be non-empty. If the operator
is Exists or DoesNotExist, the values
array must be empty. If the operator is
Gt or Lt, the values array must have a
single element, which will be interpreted
as an integer. This array is replaced
during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
type: object
weight:
description: Weight associated with matching the corresponding
nodeSelectorTerm, in the range 1-100.
format: int32
type: integer
required:
- preference
- weight
type: object
type: array
requiredDuringSchedulingIgnoredDuringExecution:
description: If the affinity requirements specified by this
field are not met at scheduling time, the pod will not
be scheduled onto the node. If the affinity requirements
specified by this field cease to be met at some point
during pod execution (e.g. due to an update), the system
may or may not try to eventually evict the pod from its
node.
properties:
nodeSelectorTerms:
description: Required. A list of node selector terms.
The terms are ORed.
items:
description: A null or empty node selector term matches
no objects. The requirements of them are ANDed.
The TopologySelectorTerm type implements a subset
of the NodeSelectorTerm.
properties:
matchExpressions:
description: A list of node selector requirements
by node's labels.
items:
description: A node selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: The label key that the selector
applies to.
type: string
operator:
description: Represents a key's relationship
to a set of values. Valid operators are
In, NotIn, Exists, DoesNotExist. Gt, and
Lt.
type: string
values:
description: An array of string values.
If the operator is In or NotIn, the values
array must be non-empty. If the operator
is Exists or DoesNotExist, the values
array must be empty. If the operator is
Gt or Lt, the values array must have a
single element, which will be interpreted
as an integer. This array is replaced
during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchFields:
description: A list of node selector requirements
by node's fields.
items:
description: A node selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: The label key that the selector
applies to.
type: string
operator:
description: Represents a key's relationship
to a set of values. Valid operators are
In, NotIn, Exists, DoesNotExist. Gt, and
Lt.
type: string
values:
description: An array of string values.
If the operator is In or NotIn, the values
array must be non-empty. If the operator
is Exists or DoesNotExist, the values
array must be empty. If the operator is
Gt or Lt, the values array must have a
single element, which will be interpreted
as an integer. This array is replaced
during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
type: object
type: array
required:
- nodeSelectorTerms
type: object
type: object
podAffinity:
description: Describes pod affinity scheduling rules (e.g. co-locate
this pod in the same node, zone, etc. as some other pod(s)).
properties:
preferredDuringSchedulingIgnoredDuringExecution:
description: The scheduler will prefer to schedule pods
to nodes that satisfy the affinity expressions specified
by this field, but it may choose a node that violates
one or more of the expressions. The node that is most
preferred is the one with the greatest sum of weights,
i.e. for each node that meets all of the scheduling requirements
(resource request, requiredDuringScheduling affinity expressions,
etc.), compute a sum by iterating through the elements
of this field and adding "weight" to the sum if the node
has pods which matches the corresponding podAffinityTerm;
the node(s) with the highest sum are the most preferred.
items:
description: The weights of all of the matched WeightedPodAffinityTerm
fields are added per-node to find the most preferred
node(s)
properties:
podAffinityTerm:
description: Required. A pod affinity term, associated
with the corresponding weight.
properties:
labelSelector:
description: A label query over a set of resources,
in this case pods.
properties:
matchExpressions:
description: matchExpressions is a list of
label selector requirements. The requirements
are ANDed.
items:
description: A label selector requirement
is a selector that contains values, a
key, and an operator that relates the
key and values.
properties:
key:
description: key is the label key that
the selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty.
If the operator is Exists or DoesNotExist,
the values array must be empty. This
array is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is
"In", and the values array contains only
"value". The requirements are ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set of namespaces
that the term applies to. The term is applied
to the union of the namespaces selected by this
field and the ones listed in the namespaces
field. null selector and null or empty namespaces
list means "this pod's namespace". An empty
selector ({}) matches all namespaces.
properties:
matchExpressions:
description: matchExpressions is a list of
label selector requirements. The requirements
are ANDed.
items:
description: A label selector requirement
is a selector that contains values, a
key, and an operator that relates the
key and values.
properties:
key:
description: key is the label key that
the selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty.
If the operator is Exists or DoesNotExist,
the values array must be empty. This
array is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is
"In", and the values array contains only
"value". The requirements are ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static list
of namespace names that the term applies to.
The term is applied to the union of the namespaces
listed in this field and the ones selected by
namespaceSelector. null or empty namespaces
list and null namespaceSelector means "this
pod's namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located (affinity)
or not co-located (anti-affinity) with the pods
matching the labelSelector in the specified
namespaces, where co-located is defined as running
on a node whose value of the label with key
topologyKey matches that of any node on which
any of the selected pods is running. Empty topologyKey
is not allowed.
type: string
required:
- topologyKey
type: object
weight:
description: weight associated with matching the corresponding
podAffinityTerm, in the range 1-100.
format: int32
type: integer
required:
- podAffinityTerm
- weight
type: object
type: array
requiredDuringSchedulingIgnoredDuringExecution:
description: If the affinity requirements specified by this
field are not met at scheduling time, the pod will not
be scheduled onto the node. If the affinity requirements
specified by this field cease to be met at some point
during pod execution (e.g. due to a pod label update),
the system may or may not try to eventually evict the
pod from its node. When there are multiple elements, the
lists of nodes corresponding to each podAffinityTerm are
intersected, i.e. all terms must be satisfied.
items:
description: Defines a set of pods (namely those matching
the labelSelector relative to the given namespace(s))
that this pod should be co-located (affinity) or not
co-located (anti-affinity) with, where co-located is
defined as running on a node whose value of the label
with key <topologyKey> matches that of any node on which
a pod of the set of pods is running
properties:
labelSelector:
description: A label query over a set of resources,
in this case pods.
properties:
matchExpressions:
description: matchExpressions is a list of label
selector requirements. The requirements are
ANDed.
items:
description: A label selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: key is the label key that the
selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty. If
the operator is Exists or DoesNotExist,
the values array must be empty. This array
is replaced during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is "In",
and the values array contains only "value".
The requirements are ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set of namespaces
that the term applies to. The term is applied to
the union of the namespaces selected by this field
and the ones listed in the namespaces field. null
selector and null or empty namespaces list means
"this pod's namespace". An empty selector ({}) matches
all namespaces.
properties:
matchExpressions:
description: matchExpressions is a list of label
selector requirements. The requirements are
ANDed.
items:
description: A label selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: key is the label key that the
selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty. If
the operator is Exists or DoesNotExist,
the values array must be empty. This array
is replaced during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is "In",
and the values array contains only "value".
The requirements are ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static list of
namespace names that the term applies to. The term
is applied to the union of the namespaces listed
in this field and the ones selected by namespaceSelector.
null or empty namespaces list and null namespaceSelector
means "this pod's namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located (affinity)
or not co-located (anti-affinity) with the pods
matching the labelSelector in the specified namespaces,
where co-located is defined as running on a node
whose value of the label with key topologyKey matches
that of any node on which any of the selected pods
is running. Empty topologyKey is not allowed.
type: string
required:
- topologyKey
type: object
type: array
type: object
podAntiAffinity:
description: Describes pod anti-affinity scheduling rules (e.g.
avoid putting this pod in the same node, zone, etc. as some
other pod(s)).
properties:
preferredDuringSchedulingIgnoredDuringExecution:
description: The scheduler will prefer to schedule pods
to nodes that satisfy the anti-affinity expressions specified
by this field, but it may choose a node that violates
one or more of the expressions. The node that is most
preferred is the one with the greatest sum of weights,
i.e. for each node that meets all of the scheduling requirements
(resource request, requiredDuringScheduling anti-affinity
expressions, etc.), compute a sum by iterating through
the elements of this field and adding "weight" to the
sum if the node has pods which matches the corresponding
podAffinityTerm; the node(s) with the highest sum are
the most preferred.
items:
description: The weights of all of the matched WeightedPodAffinityTerm
fields are added per-node to find the most preferred
node(s)
properties:
podAffinityTerm:
description: Required. A pod affinity term, associated
with the corresponding weight.
properties:
labelSelector:
description: A label query over a set of resources,
in this case pods.
properties:
matchExpressions:
description: matchExpressions is a list of
label selector requirements. The requirements
are ANDed.
items:
description: A label selector requirement
is a selector that contains values, a
key, and an operator that relates the
key and values.
properties:
key:
description: key is the label key that
the selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty.
If the operator is Exists or DoesNotExist,
the values array must be empty. This
array is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is
"In", and the values array contains only
"value". The requirements are ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set of namespaces
that the term applies to. The term is applied
to the union of the namespaces selected by this
field and the ones listed in the namespaces
field. null selector and null or empty namespaces
list means "this pod's namespace". An empty
selector ({}) matches all namespaces.
properties:
matchExpressions:
description: matchExpressions is a list of
label selector requirements. The requirements
are ANDed.
items:
description: A label selector requirement
is a selector that contains values, a
key, and an operator that relates the
key and values.
properties:
key:
description: key is the label key that
the selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty.
If the operator is Exists or DoesNotExist,
the values array must be empty. This
array is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is
"In", and the values array contains only
"value". The requirements are ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static list
of namespace names that the term applies to.
The term is applied to the union of the namespaces
listed in this field and the ones selected by
namespaceSelector. null or empty namespaces
list and null namespaceSelector means "this
pod's namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located (affinity)
or not co-located (anti-affinity) with the pods
matching the labelSelector in the specified
namespaces, where co-located is defined as running
on a node whose value of the label with key
topologyKey matches that of any node on which
any of the selected pods is running. Empty topologyKey
is not allowed.
type: string
required:
- topologyKey
type: object
weight:
description: weight associated with matching the corresponding
podAffinityTerm, in the range 1-100.
format: int32
type: integer
required:
- podAffinityTerm
- weight
type: object
type: array
requiredDuringSchedulingIgnoredDuringExecution:
description: If the anti-affinity requirements specified
by this field are not met at scheduling time, the pod
will not be scheduled onto the node. If the anti-affinity
requirements specified by this field cease to be met at
some point during pod execution (e.g. due to a pod label
update), the system may or may not try to eventually evict
the pod from its node. When there are multiple elements,
the lists of nodes corresponding to each podAffinityTerm
are intersected, i.e. all terms must be satisfied.
items:
description: Defines a set of pods (namely those matching
the labelSelector relative to the given namespace(s))
that this pod should be co-located (affinity) or not
co-located (anti-affinity) with, where co-located is
defined as running on a node whose value of the label
with key <topologyKey> matches that of any node on which
a pod of the set of pods is running
properties:
labelSelector:
description: A label query over a set of resources,
in this case pods.
properties:
matchExpressions:
description: matchExpressions is a list of label
selector requirements. The requirements are
ANDed.
items:
description: A label selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: key is the label key that the
selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty. If
the operator is Exists or DoesNotExist,
the values array must be empty. This array
is replaced during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is "In",
and the values array contains only "value".
The requirements are ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set of namespaces
that the term applies to. The term is applied to
the union of the namespaces selected by this field
and the ones listed in the namespaces field. null
selector and null or empty namespaces list means
"this pod's namespace". An empty selector ({}) matches
all namespaces.
properties:
matchExpressions:
description: matchExpressions is a list of label
selector requirements. The requirements are
ANDed.
items:
description: A label selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: key is the label key that the
selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty. If
the operator is Exists or DoesNotExist,
the values array must be empty. This array
is replaced during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is "In",
and the values array contains only "value".
The requirements are ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static list of
namespace names that the term applies to. The term
is applied to the union of the namespaces listed
in this field and the ones selected by namespaceSelector.
null or empty namespaces list and null namespaceSelector
means "this pod's namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located (affinity)
or not co-located (anti-affinity) with the pods
matching the labelSelector in the specified namespaces,
where co-located is defined as running on a node
whose value of the label with key topologyKey matches
that of any node on which any of the selected pods
is running. Empty topologyKey is not allowed.
type: string
required:
- topologyKey
type: object
type: array
type: object
type: object
nodeSelector:
additionalProperties:
type: string
description: 'nodeSelector is the node selector applied to the relevant
kind of pods It specifies a map of key-value pairs: for the pod
to be eligible to run on a node, the node must have each of the
indicated key-value pairs as labels (it can have additional labels
as well). See https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#nodeselector'
type: object
tolerations:
description: tolerations is a list of tolerations applied to the
relevant kind of pods See https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
for more info. These are additional tolerations other than default
ones.
items:
description: The pod this Toleration is attached to tolerates
any taint that matches the triple <key,value,effect> using the
matching operator <operator>.
properties:
effect:
description: Effect indicates the taint effect to match. Empty
means match all taint effects. When specified, allowed values
are NoSchedule, PreferNoSchedule and NoExecute.
type: string
key:
description: Key is the taint key that the toleration applies
to. Empty means match all taint keys. If the key is empty,
operator must be Exists; this combination means to match
all values and all keys.
type: string
operator:
description: Operator represents a key's relationship to the
value. Valid operators are Exists and Equal. Defaults to
Equal. Exists is equivalent to wildcard for value, so that
a pod can tolerate all taints of a particular category.
type: string
tolerationSeconds:
description: TolerationSeconds represents the period of time
the toleration (which must be of effect NoExecute, otherwise
this field is ignored) tolerates the taint. By default,
it is not set, which means tolerate the taint forever (do
not evict). Zero and negative values will be treated as
0 (evict immediately) by the system.
format: int64
type: integer
value:
description: Value is the taint value the toleration matches
to. If the operator is Exists, the value should be empty,
otherwise just a regular string.
type: string
type: object
type: array
type: object
replicas:
description: 'replicas indicates how many replicas should be created
for each KubeVirt infrastructure component (like virt-api or virt-controller).
Defaults to 2. WARNING: this is an advanced feature that prevents
auto-scaling for core kubevirt components. Please use with caution!'
type: integer
type: object
type: object
status:
description: KubeVirtStatus represents information pertaining to a KubeVirt
deployment.
properties:
conditions:
items:
description: KubeVirtCondition represents a condition of a KubeVirt deployment
properties:
lastProbeTime:
format: date-time
nullable: true
type: string
lastTransitionTime:
format: date-time
nullable: true
type: string
message:
type: string
reason:
type: string
status:
type: string
type:
type: string
required:
- status
- type
type: object
type: array
defaultArchitecture:
type: string
generations:
items:
description: GenerationStatus keeps track of the generation for a given
resource so that decisions about forced updates can be made.
properties:
group:
description: group is the group of the thing you're tracking
type: string
hash:
description: hash is an optional field set for resources without generation
that are content sensitive like secrets and configmaps
type: string
lastGeneration:
description: lastGeneration is the last generation of the workload
controller involved
format: int64
type: integer
name:
description: name is the name of the thing you're tracking
type: string
namespace:
description: namespace is where the thing you're tracking is
type: string
resource:
description: resource is the resource type of the thing you're tracking
type: string
required:
- group
- lastGeneration
- name
- resource
type: object
type: array
x-kubernetes-list-type: atomic
observedDeploymentConfig:
type: string
observedDeploymentID:
type: string
observedGeneration:
format: int64
type: integer
observedKubeVirtRegistry:
type: string
observedKubeVirtVersion:
type: string
operatorVersion:
type: string
outdatedVirtualMachineInstanceWorkloads:
type: integer
phase:
description: KubeVirtPhase is a label for the phase of a KubeVirt deployment
at the current time.
type: string
targetDeploymentConfig:
type: string
targetDeploymentID:
type: string
targetKubeVirtRegistry:
type: string
targetKubeVirtVersion:
type: string
type: object
required:
- spec
type: object
`,
"migrationpolicy": `openAPIV3Schema:
description: MigrationPolicy holds migration policy (i.e. configurations) to apply
to a VM or group of VMs
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest internal
value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this object
represents. Servers may infer this from the endpoint the client submits requests
to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
properties:
allowAutoConverge:
type: boolean
allowPostCopy:
type: boolean
bandwidthPerMigration:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
completionTimeoutPerGiB:
format: int64
type: integer
selectors:
properties:
namespaceSelector:
additionalProperties:
type: string
type: object
virtualMachineInstanceSelector:
additionalProperties:
type: string
type: object
type: object
required:
- selectors
type: object
status:
nullable: true
type: object
required:
- spec
type: object
`,
"virtualmachine": `openAPIV3Schema:
description: VirtualMachine handles the VirtualMachines that are not running or
are in a stopped state The VirtualMachine contains the template to create the
VirtualMachineInstance. It also mirrors the running state of the created VirtualMachineInstance
in its status.
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest internal
value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this object
represents. Servers may infer this from the endpoint the client submits requests
to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: Spec contains the specification of VirtualMachineInstance created
properties:
dataVolumeTemplates:
description: dataVolumeTemplates is a list of dataVolumes that the VirtualMachineInstance
template can reference. DataVolumes in this list are dynamically created
for the VirtualMachine and are tied to the VirtualMachine's life-cycle.
items:
nullable: true
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest
internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource
this object represents. Servers may infer this from the endpoint
the client submits requests to. Cannot be updated. In CamelCase.
More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
nullable: true
type: object
x-kubernetes-preserve-unknown-fields: true
spec:
description: DataVolumeSpec contains the DataVolume specification.
properties:
checkpoints:
description: Checkpoints is a list of DataVolumeCheckpoints, representing
stages in a multistage import.
items:
description: DataVolumeCheckpoint defines a stage in a warm
migration.
properties:
current:
description: Current is the identifier of the snapshot created
for this checkpoint.
type: string
previous:
description: Previous is the identifier of the snapshot
from the previous checkpoint.
type: string
required:
- current
- previous
type: object
type: array
contentType:
description: 'DataVolumeContentType options: "kubevirt", "archive"'
enum:
- kubevirt
- archive
type: string
finalCheckpoint:
description: FinalCheckpoint indicates whether the current DataVolumeCheckpoint
is the final checkpoint.
type: boolean
preallocation:
description: Preallocation controls whether storage for DataVolumes
should be allocated in advance.
type: boolean
priorityClassName:
description: PriorityClassName for Importer, Cloner and Uploader
pod
type: string
pvc:
description: PVC is the PVC specification
properties:
accessModes:
description: 'accessModes contains the desired access modes
the volume should have. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1'
items:
type: string
type: array
dataSource:
description: 'dataSource field can be used to specify either:
* An existing VolumeSnapshot object (snapshot.storage.k8s.io/VolumeSnapshot)
* An existing PVC (PersistentVolumeClaim) If the provisioner
or an external controller can support the specified data
source, it will create a new volume based on the contents
of the specified data source. When the AnyVolumeDataSource
feature gate is enabled, dataSource contents will be copied
to dataSourceRef, and dataSourceRef contents will be copied
to dataSource when dataSourceRef.namespace is not specified.
If the namespace is specified, then dataSourceRef will not
be copied to dataSource.'
properties:
apiGroup:
description: APIGroup is the group for the resource being
referenced. If APIGroup is not specified, the specified
Kind must be in the core API group. For any other third-party
types, APIGroup is required.
type: string
kind:
description: Kind is the type of resource being referenced
type: string
name:
description: Name is the name of resource being referenced
type: string
required:
- kind
- name
type: object
dataSourceRef:
description: 'dataSourceRef specifies the object from which
to populate the volume with data, if a non-empty volume
is desired. This may be any object from a non-empty API
group (non core object) or a PersistentVolumeClaim object.
When this field is specified, volume binding will only succeed
if the type of the specified object matches some installed
volume populator or dynamic provisioner. This field will
replace the functionality of the dataSource field and as
such if both fields are non-empty, they must have the same
value. For backwards compatibility, when namespace isn''t
specified in dataSourceRef, both fields (dataSource and
dataSourceRef) will be set to the same value automatically
if one of them is empty and the other is non-empty. When
namespace is specified in dataSourceRef, dataSource isn''t
set to the same value and must be empty. There are three
important differences between dataSource and dataSourceRef:
* While dataSource only allows two specific types of objects,
dataSourceRef allows any non-core object, as well as PersistentVolumeClaim
objects. * While dataSource ignores disallowed values (dropping
them), dataSourceRef preserves all values, and generates
an error if a disallowed value is specified. * While dataSource
only allows local objects, dataSourceRef allows objects in
any namespaces. (Beta) Using this field requires the AnyVolumeDataSource
feature gate to be enabled. (Alpha) Using the namespace
field of dataSourceRef requires the CrossNamespaceVolumeDataSource
feature gate to be enabled.'
properties:
apiGroup:
description: APIGroup is the group for the resource being
referenced. If APIGroup is not specified, the specified
Kind must be in the core API group. For any other third-party
types, APIGroup is required.
type: string
kind:
description: Kind is the type of resource being referenced
type: string
name:
description: Name is the name of resource being referenced
type: string
namespace:
description: Namespace is the namespace of resource being
referenced Note that when a namespace is specified,
a gateway.networking.k8s.io/ReferenceGrant object is
required in the referent namespace to allow that namespace's
owner to accept the reference. See the ReferenceGrant
documentation for details. (Alpha) This field requires
the CrossNamespaceVolumeDataSource feature gate to be
enabled.
type: string
required:
- kind
- name
type: object
resources:
description: 'resources represents the minimum resources the
volume should have. If RecoverVolumeExpansionFailure feature
is enabled users are allowed to specify resource requirements
that are lower than previous value but must still be higher
than capacity recorded in the status field of the claim.
More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources'
properties:
claims:
description: "Claims lists the names of resources, defined
in spec.resourceClaims, that are used by this container.
\n This is an alpha field and requires enabling the
DynamicResourceAllocation feature gate. \n This field
is immutable. It can only be set for containers."
items:
description: ResourceClaim references one entry in PodSpec.ResourceClaims.
properties:
name:
description: Name must match the name of one entry
in pod.spec.resourceClaims of the Pod where this
field is used. It makes that resource available
inside a container.
type: string
required:
- name
type: object
type: array
x-kubernetes-list-map-keys:
- name
x-kubernetes-list-type: map
limits:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: 'Limits describes the maximum amount of compute
resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
type: object
requests:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: 'Requests describes the minimum amount of
compute resources required. If Requests is omitted for
a container, it defaults to Limits if that is explicitly
specified, otherwise to an implementation-defined value.
More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
type: object
type: object
selector:
description: selector is a label query over volumes to consider
for binding.
properties:
matchExpressions:
description: matchExpressions is a list of label selector
requirements. The requirements are ANDed.
items:
description: A label selector requirement is a selector
that contains values, a key, and an operator that
relates the key and values.
properties:
key:
description: key is the label key that the selector
applies to.
type: string
operator:
description: operator represents a key's relationship
to a set of values. Valid operators are In, NotIn,
Exists and DoesNotExist.
type: string
values:
description: values is an array of string values.
If the operator is In or NotIn, the values array
must be non-empty. If the operator is Exists or
DoesNotExist, the values array must be empty.
This array is replaced during a strategic merge
patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value} pairs.
A single {key,value} in the matchLabels map is equivalent
to an element of matchExpressions, whose key field is
"key", the operator is "In", and the values array contains
only "value". The requirements are ANDed.
type: object
type: object
storageClassName:
description: 'storageClassName is the name of the StorageClass
required by the claim. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#class-1'
type: string
volumeMode:
description: volumeMode defines what type of volume is required
by the claim. Value of Filesystem is implied when not included
in claim spec.
type: string
volumeName:
description: volumeName is the binding reference to the PersistentVolume
backing this claim.
type: string
type: object
source:
description: Source is the src of the data for the requested DataVolume
properties:
blank:
description: DataVolumeBlankImage provides the parameters
to create a new raw blank image for the PVC
type: object
gcs:
description: DataVolumeSourceGCS provides the parameters to
create a Data Volume from an GCS source
properties:
secretRef:
description: SecretRef provides the secret reference needed
to access the GCS source
type: string
url:
description: URL is the url of the GCS source
type: string
required:
- url
type: object
http:
description: DataVolumeSourceHTTP can be either an http or
https endpoint, with an optional basic auth user name and
password, and an optional configmap containing additional
CAs
properties:
certConfigMap:
description: CertConfigMap is a configmap reference, containing
a Certificate Authority(CA) public key, and a base64
encoded pem certificate
type: string
extraHeaders:
description: ExtraHeaders is a list of strings containing
extra headers to include with HTTP transfer requests
items:
type: string
type: array
secretExtraHeaders:
description: SecretExtraHeaders is a list of Secret references,
each containing an extra HTTP header that may include
sensitive information
items:
type: string
type: array
secretRef:
description: SecretRef A Secret reference, the secret
should contain accessKeyId (user name) base64 encoded,
and secretKey (password) also base64 encoded
type: string
url:
description: URL is the URL of the http(s) endpoint
type: string
required:
- url
type: object
imageio:
description: DataVolumeSourceImageIO provides the parameters
to create a Data Volume from an imageio source
properties:
certConfigMap:
description: CertConfigMap provides a reference to the
CA cert
type: string
diskId:
description: DiskID provides id of a disk to be imported
type: string
secretRef:
description: SecretRef provides the secret reference needed
to access the ovirt-engine
type: string
url:
description: URL is the URL of the ovirt-engine
type: string
required:
- diskId
- url
type: object
pvc:
description: DataVolumeSourcePVC provides the parameters to
create a Data Volume from an existing PVC
properties:
name:
description: The name of the source PVC
type: string
namespace:
description: The namespace of the source PVC
type: string
required:
- name
- namespace
type: object
registry:
description: DataVolumeSourceRegistry provides the parameters
to create a Data Volume from an registry source
properties:
certConfigMap:
description: CertConfigMap provides a reference to the
Registry certs
type: string
imageStream:
description: ImageStream is the name of image stream for
import
type: string
pullMethod:
description: PullMethod can be either "pod" (default import),
or "node" (node docker cache based import)
type: string
secretRef:
description: SecretRef provides the secret reference needed
to access the Registry source
type: string
url:
description: 'URL is the url of the registry source (starting
with the scheme: docker, oci-archive)'
type: string
type: object
s3:
description: DataVolumeSourceS3 provides the parameters to
create a Data Volume from an S3 source
properties:
certConfigMap:
description: CertConfigMap is a configmap reference, containing
a Certificate Authority(CA) public key, and a base64
encoded pem certificate
type: string
secretRef:
description: SecretRef provides the secret reference needed
to access the S3 source
type: string
url:
description: URL is the url of the S3 source
type: string
required:
- url
type: object
snapshot:
description: DataVolumeSourceSnapshot provides the parameters
to create a Data Volume from an existing VolumeSnapshot
properties:
name:
description: The name of the source VolumeSnapshot
type: string
namespace:
description: The namespace of the source VolumeSnapshot
type: string
required:
- name
- namespace
type: object
upload:
description: DataVolumeSourceUpload provides the parameters
to create a Data Volume by uploading the source
type: object
vddk:
description: DataVolumeSourceVDDK provides the parameters
to create a Data Volume from a Vmware source
properties:
backingFile:
description: BackingFile is the path to the virtual hard
disk to migrate from vCenter/ESXi
type: string
initImageURL:
description: InitImageURL is an optional URL to an image
containing an extracted VDDK library, overrides v2v-vmware
config map
type: string
secretRef:
description: SecretRef provides a reference to a secret
containing the username and password needed to access
the vCenter or ESXi host
type: string
thumbprint:
description: Thumbprint is the certificate thumbprint
of the vCenter or ESXi host
type: string
url:
description: URL is the URL of the vCenter or ESXi host
with the VM to migrate
type: string
uuid:
description: UUID is the UUID of the virtual machine that
the backing file is attached to in vCenter/ESXi
type: string
type: object
type: object
sourceRef:
description: SourceRef is an indirect reference to the source
of data for the requested DataVolume
properties:
kind:
description: The kind of the source reference, currently only
"DataSource" is supported
type: string
name:
description: The name of the source reference
type: string
namespace:
description: The namespace of the source reference, defaults
to the DataVolume namespace
type: string
required:
- kind
- name
type: object
storage:
description: Storage is the requested storage specification
properties:
accessModes:
description: 'AccessModes contains the desired access modes
the volume should have. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1'
items:
type: string
type: array
dataSource:
description: 'This field can be used to specify either: *
An existing VolumeSnapshot object (snapshot.storage.k8s.io/VolumeSnapshot)
* An existing PVC (PersistentVolumeClaim) * An existing
custom resource that implements data population (Alpha)
In order to use custom resource types that implement data
population, the AnyVolumeDataSource feature gate must be
enabled. If the provisioner or an external controller can
support the specified data source, it will create a new
volume based on the contents of the specified data source.
If the AnyVolumeDataSource feature gate is enabled, this
field will always have the same contents as the DataSourceRef
field.'
properties:
apiGroup:
description: APIGroup is the group for the resource being
referenced. If APIGroup is not specified, the specified
Kind must be in the core API group. For any other third-party
types, APIGroup is required.
type: string
kind:
description: Kind is the type of resource being referenced
type: string
name:
description: Name is the name of resource being referenced
type: string
required:
- kind
- name
type: object
dataSourceRef:
description: 'Specifies the object from which to populate
the volume with data, if a non-empty volume is desired.
This may be any local object from a non-empty API group
(non core object) or a PersistentVolumeClaim object. When
this field is specified, volume binding will only succeed
if the type of the specified object matches some installed
volume populator or dynamic provisioner. This field will
replace the functionality of the DataSource field and as
such if both fields are non-empty, they must have the same
value. For backwards compatibility, both fields (DataSource
and DataSourceRef) will be set to the same value automatically
if one of them is empty and the other is non-empty. There
are two important differences between DataSource and DataSourceRef:
* While DataSource only allows two specific types of objects,
DataSourceRef allows any non-core object, as well as PersistentVolumeClaim
objects. * While DataSource ignores disallowed values (dropping
them), DataSourceRef preserves all values, and generates
an error if a disallowed value is specified. (Beta) Using
this field requires the AnyVolumeDataSource feature gate
to be enabled.'
properties:
apiGroup:
description: APIGroup is the group for the resource being
referenced. If APIGroup is not specified, the specified
Kind must be in the core API group. For any other third-party
types, APIGroup is required.
type: string
kind:
description: Kind is the type of resource being referenced
type: string
name:
description: Name is the name of resource being referenced
type: string
namespace:
description: Namespace is the namespace of resource being
referenced Note that when a namespace is specified,
a gateway.networking.k8s.io/ReferenceGrant object is
required in the referent namespace to allow that namespace's
owner to accept the reference. See the ReferenceGrant
documentation for details. (Alpha) This field requires
the CrossNamespaceVolumeDataSource feature gate to be
enabled.
type: string
required:
- kind
- name
type: object
resources:
description: 'Resources represents the minimum resources the
volume should have. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources'
properties:
claims:
description: "Claims lists the names of resources, defined
in spec.resourceClaims, that are used by this container.
\n This is an alpha field and requires enabling the
DynamicResourceAllocation feature gate. \n This field
is immutable. It can only be set for containers."
items:
description: ResourceClaim references one entry in PodSpec.ResourceClaims.
properties:
name:
description: Name must match the name of one entry
in pod.spec.resourceClaims of the Pod where this
field is used. It makes that resource available
inside a container.
type: string
required:
- name
type: object
type: array
x-kubernetes-list-map-keys:
- name
x-kubernetes-list-type: map
limits:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: 'Limits describes the maximum amount of compute
resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
type: object
requests:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: 'Requests describes the minimum amount of
compute resources required. If Requests is omitted for
a container, it defaults to Limits if that is explicitly
specified, otherwise to an implementation-defined value.
More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
type: object
type: object
selector:
description: A label query over volumes to consider for binding.
properties:
matchExpressions:
description: matchExpressions is a list of label selector
requirements. The requirements are ANDed.
items:
description: A label selector requirement is a selector
that contains values, a key, and an operator that
relates the key and values.
properties:
key:
description: key is the label key that the selector
applies to.
type: string
operator:
description: operator represents a key's relationship
to a set of values. Valid operators are In, NotIn,
Exists and DoesNotExist.
type: string
values:
description: values is an array of string values.
If the operator is In or NotIn, the values array
must be non-empty. If the operator is Exists or
DoesNotExist, the values array must be empty.
This array is replaced during a strategic merge
patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value} pairs.
A single {key,value} in the matchLabels map is equivalent
to an element of matchExpressions, whose key field is
"key", the operator is "In", and the values array contains
only "value". The requirements are ANDed.
type: object
type: object
storageClassName:
description: 'Name of the StorageClass required by the claim.
More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#class-1'
type: string
volumeMode:
description: volumeMode defines what type of volume is required
by the claim. Value of Filesystem is implied when not included
in claim spec.
type: string
volumeName:
description: VolumeName is the binding reference to the PersistentVolume
backing this claim.
type: string
type: object
type: object
status:
description: DataVolumeTemplateDummyStatus is here simply for backwards
compatibility with a previous API.
nullable: true
type: object
required:
- spec
type: object
type: array
instancetype:
description: InstancetypeMatcher references a instancetype that is used
to fill fields in Template
properties:
inferFromVolume:
description: InferFromVolume lists the name of a volume that should
be used to infer or discover the instancetype to be used through known
annotations on the underlying resource. Once applied to the InstancetypeMatcher
this field is removed.
type: string
inferFromVolumeFailurePolicy:
description: 'InferFromVolumeFailurePolicy controls what should happen
on failure when inferring the instancetype. Allowed values are: "RejectInferFromVolumeFailure"
and "IgnoreInferFromVolumeFailure". If not specified, "RejectInferFromVolumeFailure"
is used by default.'
type: string
kind:
description: 'Kind specifies which instancetype resource is referenced.
Allowed values are: "VirtualMachineInstancetype" and "VirtualMachineClusterInstancetype".
If not specified, "VirtualMachineClusterInstancetype" is used by default.'
type: string
name:
description: Name is the name of the VirtualMachineInstancetype or VirtualMachineClusterInstancetype
type: string
revisionName:
description: RevisionName specifies a ControllerRevision containing
a specific copy of the VirtualMachineInstancetype or VirtualMachineClusterInstancetype
to be used. This is initially captured the first time the instancetype
is applied to the VirtualMachineInstance.
type: string
type: object
preference:
description: PreferenceMatcher references a set of preference that is used
to fill fields in Template
properties:
inferFromVolume:
description: InferFromVolume lists the name of a volume that should
be used to infer or discover the preference to be used through known
annotations on the underlying resource. Once applied to the PreferenceMatcher
this field is removed.
type: string
inferFromVolumeFailurePolicy:
description: 'InferFromVolumeFailurePolicy controls what should happen
on failure when preference the instancetype. Allowed values are: "RejectInferFromVolumeFailure"
and "IgnoreInferFromVolumeFailure". If not specified, "RejectInferFromVolumeFailure"
is used by default.'
type: string
kind:
description: 'Kind specifies which preference resource is referenced.
Allowed values are: "VirtualMachinePreference" and "VirtualMachineClusterPreference".
If not specified, "VirtualMachineClusterPreference" is used by default.'
type: string
name:
description: Name is the name of the VirtualMachinePreference or VirtualMachineClusterPreference
type: string
revisionName:
description: RevisionName specifies a ControllerRevision containing
a specific copy of the VirtualMachinePreference or VirtualMachineClusterPreference
to be used. This is initially captured the first time the instancetype
is applied to the VirtualMachineInstance.
type: string
type: object
runStrategy:
description: Running state indicates the requested running state of the
VirtualMachineInstance mutually exclusive with Running
type: string
running:
description: Running controls whether the associatied VirtualMachineInstance
is created or not Mutually exclusive with RunStrategy
type: boolean
template:
description: Template is the direct specification of VirtualMachineInstance
properties:
metadata:
nullable: true
type: object
x-kubernetes-preserve-unknown-fields: true
spec:
description: VirtualMachineInstance Spec contains the VirtualMachineInstance
specification.
properties:
accessCredentials:
description: Specifies a set of public keys to inject into the vm
guest
items:
description: AccessCredential represents a credential source that
can be used to authorize remote access to the vm guest Only
one of its members may be specified.
properties:
sshPublicKey:
description: SSHPublicKey represents the source and method
of applying a ssh public key into a guest virtual machine.
properties:
propagationMethod:
description: PropagationMethod represents how the public
key is injected into the vm guest.
properties:
configDrive:
description: ConfigDrivePropagation means that the
ssh public keys are injected into the VM using metadata
using the configDrive cloud-init provider
type: object
noCloud:
description: NoCloudPropagation means that the ssh
public keys are injected into the VM using metadata
using the noCloud cloud-init provider
type: object
qemuGuestAgent:
description: QemuGuestAgentAccessCredentailPropagation
means ssh public keys are dynamically injected into
the vm at runtime via the qemu guest agent. This
feature requires the qemu guest agent to be running
within the guest.
properties:
users:
description: Users represents a list of guest
users that should have the ssh public keys added
to their authorized_keys file.
items:
type: string
type: array
x-kubernetes-list-type: set
required:
- users
type: object
type: object
source:
description: Source represents where the public keys are
pulled from
properties:
secret:
description: Secret means that the access credential
is pulled from a kubernetes secret
properties:
secretName:
description: SecretName represents the name of
the secret in the VMI's namespace
type: string
required:
- secretName
type: object
type: object
required:
- propagationMethod
- source
type: object
userPassword:
description: UserPassword represents the source and method
for applying a guest user's password
properties:
propagationMethod:
description: propagationMethod represents how the user
passwords are injected into the vm guest.
properties:
qemuGuestAgent:
description: QemuGuestAgentAccessCredentailPropagation
means passwords are dynamically injected into the
vm at runtime via the qemu guest agent. This feature
requires the qemu guest agent to be running within
the guest.
type: object
type: object
source:
description: Source represents where the user passwords
are pulled from
properties:
secret:
description: Secret means that the access credential
is pulled from a kubernetes secret
properties:
secretName:
description: SecretName represents the name of
the secret in the VMI's namespace
type: string
required:
- secretName
type: object
type: object
required:
- propagationMethod
- source
type: object
type: object
type: array
x-kubernetes-list-type: atomic
affinity:
description: If affinity is specifies, obey all the affinity rules
properties:
nodeAffinity:
description: Describes node affinity scheduling rules for the
pod.
properties:
preferredDuringSchedulingIgnoredDuringExecution:
description: The scheduler will prefer to schedule pods
to nodes that satisfy the affinity expressions specified
by this field, but it may choose a node that violates
one or more of the expressions. The node that is most
preferred is the one with the greatest sum of weights,
i.e. for each node that meets all of the scheduling requirements
(resource request, requiredDuringScheduling affinity expressions,
etc.), compute a sum by iterating through the elements
of this field and adding "weight" to the sum if the node
matches the corresponding matchExpressions; the node(s)
with the highest sum are the most preferred.
items:
description: An empty preferred scheduling term matches
all objects with implicit weight 0 (i.e. it's a no-op).
A null preferred scheduling term matches no objects
(i.e. is also a no-op).
properties:
preference:
description: A node selector term, associated with
the corresponding weight.
properties:
matchExpressions:
description: A list of node selector requirements
by node's labels.
items:
description: A node selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: The label key that the selector
applies to.
type: string
operator:
description: Represents a key's relationship
to a set of values. Valid operators are
In, NotIn, Exists, DoesNotExist. Gt, and
Lt.
type: string
values:
description: An array of string values.
If the operator is In or NotIn, the values
array must be non-empty. If the operator
is Exists or DoesNotExist, the values
array must be empty. If the operator is
Gt or Lt, the values array must have a
single element, which will be interpreted
as an integer. This array is replaced
during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchFields:
description: A list of node selector requirements
by node's fields.
items:
description: A node selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: The label key that the selector
applies to.
type: string
operator:
description: Represents a key's relationship
to a set of values. Valid operators are
In, NotIn, Exists, DoesNotExist. Gt, and
Lt.
type: string
values:
description: An array of string values.
If the operator is In or NotIn, the values
array must be non-empty. If the operator
is Exists or DoesNotExist, the values
array must be empty. If the operator is
Gt or Lt, the values array must have a
single element, which will be interpreted
as an integer. This array is replaced
during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
type: object
weight:
description: Weight associated with matching the corresponding
nodeSelectorTerm, in the range 1-100.
format: int32
type: integer
required:
- preference
- weight
type: object
type: array
requiredDuringSchedulingIgnoredDuringExecution:
description: If the affinity requirements specified by this
field are not met at scheduling time, the pod will not
be scheduled onto the node. If the affinity requirements
specified by this field cease to be met at some point
during pod execution (e.g. due to an update), the system
may or may not try to eventually evict the pod from its
node.
properties:
nodeSelectorTerms:
description: Required. A list of node selector terms.
The terms are ORed.
items:
description: A null or empty node selector term matches
no objects. The requirements of them are ANDed.
The TopologySelectorTerm type implements a subset
of the NodeSelectorTerm.
properties:
matchExpressions:
description: A list of node selector requirements
by node's labels.
items:
description: A node selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: The label key that the selector
applies to.
type: string
operator:
description: Represents a key's relationship
to a set of values. Valid operators are
In, NotIn, Exists, DoesNotExist. Gt, and
Lt.
type: string
values:
description: An array of string values.
If the operator is In or NotIn, the values
array must be non-empty. If the operator
is Exists or DoesNotExist, the values
array must be empty. If the operator is
Gt or Lt, the values array must have a
single element, which will be interpreted
as an integer. This array is replaced
during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchFields:
description: A list of node selector requirements
by node's fields.
items:
description: A node selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: The label key that the selector
applies to.
type: string
operator:
description: Represents a key's relationship
to a set of values. Valid operators are
In, NotIn, Exists, DoesNotExist. Gt, and
Lt.
type: string
values:
description: An array of string values.
If the operator is In or NotIn, the values
array must be non-empty. If the operator
is Exists or DoesNotExist, the values
array must be empty. If the operator is
Gt or Lt, the values array must have a
single element, which will be interpreted
as an integer. This array is replaced
during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
type: object
type: array
required:
- nodeSelectorTerms
type: object
type: object
podAffinity:
description: Describes pod affinity scheduling rules (e.g. co-locate
this pod in the same node, zone, etc. as some other pod(s)).
properties:
preferredDuringSchedulingIgnoredDuringExecution:
description: The scheduler will prefer to schedule pods
to nodes that satisfy the affinity expressions specified
by this field, but it may choose a node that violates
one or more of the expressions. The node that is most
preferred is the one with the greatest sum of weights,
i.e. for each node that meets all of the scheduling requirements
(resource request, requiredDuringScheduling affinity expressions,
etc.), compute a sum by iterating through the elements
of this field and adding "weight" to the sum if the node
has pods which matches the corresponding podAffinityTerm;
the node(s) with the highest sum are the most preferred.
items:
description: The weights of all of the matched WeightedPodAffinityTerm
fields are added per-node to find the most preferred
node(s)
properties:
podAffinityTerm:
description: Required. A pod affinity term, associated
with the corresponding weight.
properties:
labelSelector:
description: A label query over a set of resources,
in this case pods.
properties:
matchExpressions:
description: matchExpressions is a list of
label selector requirements. The requirements
are ANDed.
items:
description: A label selector requirement
is a selector that contains values, a
key, and an operator that relates the
key and values.
properties:
key:
description: key is the label key that
the selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty.
If the operator is Exists or DoesNotExist,
the values array must be empty. This
array is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is
"In", and the values array contains only
"value". The requirements are ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set of namespaces
that the term applies to. The term is applied
to the union of the namespaces selected by this
field and the ones listed in the namespaces
field. null selector and null or empty namespaces
list means "this pod's namespace". An empty
selector ({}) matches all namespaces.
properties:
matchExpressions:
description: matchExpressions is a list of
label selector requirements. The requirements
are ANDed.
items:
description: A label selector requirement
is a selector that contains values, a
key, and an operator that relates the
key and values.
properties:
key:
description: key is the label key that
the selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty.
If the operator is Exists or DoesNotExist,
the values array must be empty. This
array is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is
"In", and the values array contains only
"value". The requirements are ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static list
of namespace names that the term applies to.
The term is applied to the union of the namespaces
listed in this field and the ones selected by
namespaceSelector. null or empty namespaces
list and null namespaceSelector means "this
pod's namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located (affinity)
or not co-located (anti-affinity) with the pods
matching the labelSelector in the specified
namespaces, where co-located is defined as running
on a node whose value of the label with key
topologyKey matches that of any node on which
any of the selected pods is running. Empty topologyKey
is not allowed.
type: string
required:
- topologyKey
type: object
weight:
description: weight associated with matching the corresponding
podAffinityTerm, in the range 1-100.
format: int32
type: integer
required:
- podAffinityTerm
- weight
type: object
type: array
requiredDuringSchedulingIgnoredDuringExecution:
description: If the affinity requirements specified by this
field are not met at scheduling time, the pod will not
be scheduled onto the node. If the affinity requirements
specified by this field cease to be met at some point
during pod execution (e.g. due to a pod label update),
the system may or may not try to eventually evict the
pod from its node. When there are multiple elements, the
lists of nodes corresponding to each podAffinityTerm are
intersected, i.e. all terms must be satisfied.
items:
description: Defines a set of pods (namely those matching
the labelSelector relative to the given namespace(s))
that this pod should be co-located (affinity) or not
co-located (anti-affinity) with, where co-located is
defined as running on a node whose value of the label
with key <topologyKey> matches that of any node on which
a pod of the set of pods is running
properties:
labelSelector:
description: A label query over a set of resources,
in this case pods.
properties:
matchExpressions:
description: matchExpressions is a list of label
selector requirements. The requirements are
ANDed.
items:
description: A label selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: key is the label key that the
selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty. If
the operator is Exists or DoesNotExist,
the values array must be empty. This array
is replaced during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is "In",
and the values array contains only "value".
The requirements are ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set of namespaces
that the term applies to. The term is applied to
the union of the namespaces selected by this field
and the ones listed in the namespaces field. null
selector and null or empty namespaces list means
"this pod's namespace". An empty selector ({}) matches
all namespaces.
properties:
matchExpressions:
description: matchExpressions is a list of label
selector requirements. The requirements are
ANDed.
items:
description: A label selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: key is the label key that the
selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty. If
the operator is Exists or DoesNotExist,
the values array must be empty. This array
is replaced during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is "In",
and the values array contains only "value".
The requirements are ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static list of
namespace names that the term applies to. The term
is applied to the union of the namespaces listed
in this field and the ones selected by namespaceSelector.
null or empty namespaces list and null namespaceSelector
means "this pod's namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located (affinity)
or not co-located (anti-affinity) with the pods
matching the labelSelector in the specified namespaces,
where co-located is defined as running on a node
whose value of the label with key topologyKey matches
that of any node on which any of the selected pods
is running. Empty topologyKey is not allowed.
type: string
required:
- topologyKey
type: object
type: array
type: object
podAntiAffinity:
description: Describes pod anti-affinity scheduling rules (e.g.
avoid putting this pod in the same node, zone, etc. as some
other pod(s)).
properties:
preferredDuringSchedulingIgnoredDuringExecution:
description: The scheduler will prefer to schedule pods
to nodes that satisfy the anti-affinity expressions specified
by this field, but it may choose a node that violates
one or more of the expressions. The node that is most
preferred is the one with the greatest sum of weights,
i.e. for each node that meets all of the scheduling requirements
(resource request, requiredDuringScheduling anti-affinity
expressions, etc.), compute a sum by iterating through
the elements of this field and adding "weight" to the
sum if the node has pods which matches the corresponding
podAffinityTerm; the node(s) with the highest sum are
the most preferred.
items:
description: The weights of all of the matched WeightedPodAffinityTerm
fields are added per-node to find the most preferred
node(s)
properties:
podAffinityTerm:
description: Required. A pod affinity term, associated
with the corresponding weight.
properties:
labelSelector:
description: A label query over a set of resources,
in this case pods.
properties:
matchExpressions:
description: matchExpressions is a list of
label selector requirements. The requirements
are ANDed.
items:
description: A label selector requirement
is a selector that contains values, a
key, and an operator that relates the
key and values.
properties:
key:
description: key is the label key that
the selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty.
If the operator is Exists or DoesNotExist,
the values array must be empty. This
array is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is
"In", and the values array contains only
"value". The requirements are ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set of namespaces
that the term applies to. The term is applied
to the union of the namespaces selected by this
field and the ones listed in the namespaces
field. null selector and null or empty namespaces
list means "this pod's namespace". An empty
selector ({}) matches all namespaces.
properties:
matchExpressions:
description: matchExpressions is a list of
label selector requirements. The requirements
are ANDed.
items:
description: A label selector requirement
is a selector that contains values, a
key, and an operator that relates the
key and values.
properties:
key:
description: key is the label key that
the selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty.
If the operator is Exists or DoesNotExist,
the values array must be empty. This
array is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is
"In", and the values array contains only
"value". The requirements are ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static list
of namespace names that the term applies to.
The term is applied to the union of the namespaces
listed in this field and the ones selected by
namespaceSelector. null or empty namespaces
list and null namespaceSelector means "this
pod's namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located (affinity)
or not co-located (anti-affinity) with the pods
matching the labelSelector in the specified
namespaces, where co-located is defined as running
on a node whose value of the label with key
topologyKey matches that of any node on which
any of the selected pods is running. Empty topologyKey
is not allowed.
type: string
required:
- topologyKey
type: object
weight:
description: weight associated with matching the corresponding
podAffinityTerm, in the range 1-100.
format: int32
type: integer
required:
- podAffinityTerm
- weight
type: object
type: array
requiredDuringSchedulingIgnoredDuringExecution:
description: If the anti-affinity requirements specified
by this field are not met at scheduling time, the pod
will not be scheduled onto the node. If the anti-affinity
requirements specified by this field cease to be met at
some point during pod execution (e.g. due to a pod label
update), the system may or may not try to eventually evict
the pod from its node. When there are multiple elements,
the lists of nodes corresponding to each podAffinityTerm
are intersected, i.e. all terms must be satisfied.
items:
description: Defines a set of pods (namely those matching
the labelSelector relative to the given namespace(s))
that this pod should be co-located (affinity) or not
co-located (anti-affinity) with, where co-located is
defined as running on a node whose value of the label
with key <topologyKey> matches that of any node on which
a pod of the set of pods is running
properties:
labelSelector:
description: A label query over a set of resources,
in this case pods.
properties:
matchExpressions:
description: matchExpressions is a list of label
selector requirements. The requirements are
ANDed.
items:
description: A label selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: key is the label key that the
selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty. If
the operator is Exists or DoesNotExist,
the values array must be empty. This array
is replaced during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is "In",
and the values array contains only "value".
The requirements are ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set of namespaces
that the term applies to. The term is applied to
the union of the namespaces selected by this field
and the ones listed in the namespaces field. null
selector and null or empty namespaces list means
"this pod's namespace". An empty selector ({}) matches
all namespaces.
properties:
matchExpressions:
description: matchExpressions is a list of label
selector requirements. The requirements are
ANDed.
items:
description: A label selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: key is the label key that the
selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty. If
the operator is Exists or DoesNotExist,
the values array must be empty. This array
is replaced during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is "In",
and the values array contains only "value".
The requirements are ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static list of
namespace names that the term applies to. The term
is applied to the union of the namespaces listed
in this field and the ones selected by namespaceSelector.
null or empty namespaces list and null namespaceSelector
means "this pod's namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located (affinity)
or not co-located (anti-affinity) with the pods
matching the labelSelector in the specified namespaces,
where co-located is defined as running on a node
whose value of the label with key topologyKey matches
that of any node on which any of the selected pods
is running. Empty topologyKey is not allowed.
type: string
required:
- topologyKey
type: object
type: array
type: object
type: object
architecture:
description: Specifies the architecture of the vm guest you are
attempting to run. Defaults to the compiled architecture of the
KubeVirt components
type: string
dnsConfig:
description: Specifies the DNS parameters of a pod. Parameters specified
here will be merged to the generated DNS configuration based on
DNSPolicy.
properties:
nameservers:
description: A list of DNS name server IP addresses. This will
be appended to the base nameservers generated from DNSPolicy.
Duplicated nameservers will be removed.
items:
type: string
type: array
options:
description: A list of DNS resolver options. This will be merged
with the base options generated from DNSPolicy. Duplicated
entries will be removed. Resolution options given in Options
will override those that appear in the base DNSPolicy.
items:
description: PodDNSConfigOption defines DNS resolver options
of a pod.
properties:
name:
description: Required.
type: string
value:
type: string
type: object
type: array
searches:
description: A list of DNS search domains for host-name lookup.
This will be appended to the base search paths generated from
DNSPolicy. Duplicated search paths will be removed.
items:
type: string
type: array
type: object
dnsPolicy:
description: Set DNS policy for the pod. Defaults to "ClusterFirst".
Valid values are 'ClusterFirstWithHostNet', 'ClusterFirst', 'Default'
or 'None'. DNS parameters given in DNSConfig will be merged with
the policy selected with DNSPolicy. To have DNS options set along
with hostNetwork, you have to specify DNS policy explicitly to
'ClusterFirstWithHostNet'.
type: string
domain:
description: Specification of the desired behavior of the VirtualMachineInstance
on the host.
properties:
chassis:
description: Chassis specifies the chassis info passed to the
domain.
properties:
asset:
type: string
manufacturer:
type: string
serial:
type: string
sku:
type: string
version:
type: string
type: object
clock:
description: Clock sets the clock and timers of the vmi.
properties:
timer:
description: Timer specifies whih timers are attached to
the vmi.
properties:
hpet:
description: HPET (High Precision Event Timer) - multiple
timers with periodic interrupts.
properties:
present:
description: Enabled set to false makes sure that
the machine type or a preset can't add the timer.
Defaults to true.
type: boolean
tickPolicy:
description: TickPolicy determines what happens
when QEMU misses a deadline for injecting a tick
to the guest. One of "delay", "catchup", "merge",
"discard".
type: string
type: object
hyperv:
description: Hyperv (Hypervclock) - lets guests read
the host’s wall clock time (paravirtualized). For
windows guests.
properties:
present:
description: Enabled set to false makes sure that
the machine type or a preset can't add the timer.
Defaults to true.
type: boolean
type: object
kvm:
description: "KVM \t(KVM clock) - lets guests read the
host’s wall clock time (paravirtualized). For linux
guests."
properties:
present:
description: Enabled set to false makes sure that
the machine type or a preset can't add the timer.
Defaults to true.
type: boolean
type: object
pit:
description: PIT (Programmable Interval Timer) - a timer
with periodic interrupts.
properties:
present:
description: Enabled set to false makes sure that
the machine type or a preset can't add the timer.
Defaults to true.
type: boolean
tickPolicy:
description: TickPolicy determines what happens
when QEMU misses a deadline for injecting a tick
to the guest. One of "delay", "catchup", "discard".
type: string
type: object
rtc:
description: RTC (Real Time Clock) - a continuously
running timer with periodic interrupts.
properties:
present:
description: Enabled set to false makes sure that
the machine type or a preset can't add the timer.
Defaults to true.
type: boolean
tickPolicy:
description: TickPolicy determines what happens
when QEMU misses a deadline for injecting a tick
to the guest. One of "delay", "catchup".
type: string
track:
description: Track the guest or the wall clock.
type: string
type: object
type: object
timezone:
description: Timezone sets the guest clock to the specified
timezone. Zone name follows the TZ environment variable
format (e.g. 'America/New_York').
type: string
utc:
description: UTC sets the guest clock to UTC on each boot.
If an offset is specified, guest changes to the clock
will be kept during reboots and are not reset.
properties:
offsetSeconds:
description: OffsetSeconds specifies an offset in seconds,
relative to UTC. If set, guest changes to the clock
will be kept during reboots and not reset.
type: integer
type: object
type: object
cpu:
description: CPU allow specified the detailed CPU topology inside
the vmi.
properties:
cores:
description: Cores specifies the number of cores inside
the vmi. Must be a value greater or equal 1.
format: int32
type: integer
dedicatedCpuPlacement:
description: DedicatedCPUPlacement requests the scheduler
to place the VirtualMachineInstance on a node with enough
dedicated pCPUs and pin the vCPUs to it.
type: boolean
features:
description: Features specifies the CPU features list inside
the VMI.
items:
description: CPUFeature allows specifying a CPU feature.
properties:
name:
description: Name of the CPU feature
type: string
policy:
description: 'Policy is the CPU feature attribute
which can have the following attributes: force -
The virtual CPU will claim the feature is supported
regardless of it being supported by host CPU. require -
Guest creation will fail unless the feature is supported
by the host CPU or the hypervisor is able to emulate
it. optional - The feature will be supported by
virtual CPU if and only if it is supported by host
CPU. disable - The feature will not be supported
by virtual CPU. forbid - Guest creation will fail
if the feature is supported by host CPU. Defaults
to require'
type: string
required:
- name
type: object
type: array
isolateEmulatorThread:
description: IsolateEmulatorThread requests one more dedicated
pCPU to be allocated for the VMI to place the emulator
thread on it.
type: boolean
maxSockets:
description: MaxSockets specifies the maximum amount of
sockets that can be hotplugged
format: int32
type: integer
model:
description: Model specifies the CPU model inside the VMI.
List of available models https://github.com/libvirt/libvirt/tree/master/src/cpu_map.
It is possible to specify special cases like "host-passthrough"
to get the same CPU as the node and "host-model" to get
CPU closest to the node one. Defaults to host-model.
type: string
numa:
description: NUMA allows specifying settings for the guest
NUMA topology
properties:
guestMappingPassthrough:
description: GuestMappingPassthrough will create an
efficient guest topology based on host CPUs exclusively
assigned to a pod. The created topology ensures that
memory and CPUs on the virtual numa nodes never cross
boundaries of host numa nodes.
type: object
type: object
realtime:
description: Realtime instructs the virt-launcher to tune
the VMI for lower latency, optional for real time workloads
properties:
mask:
description: 'Mask defines the vcpu mask expression
that defines which vcpus are used for realtime. Format
matches libvirt''s expressions. Example: "0-3,^1","0,2,3","2-3"'
type: string
type: object
sockets:
description: Sockets specifies the number of sockets inside
the vmi. Must be a value greater or equal 1.
format: int32
type: integer
threads:
description: Threads specifies the number of threads inside
the vmi. Must be a value greater or equal 1.
format: int32
type: integer
type: object
devices:
description: Devices allows adding disks, network interfaces,
and others
properties:
autoattachGraphicsDevice:
description: Whether to attach the default graphics device
or not. VNC will not be available if set to false. Defaults
to true.
type: boolean
autoattachInputDevice:
description: Whether to attach an Input Device. Defaults
to false.
type: boolean
autoattachMemBalloon:
description: Whether to attach the Memory balloon device
with default period. Period can be adjusted in virt-config.
Defaults to true.
type: boolean
autoattachPodInterface:
description: Whether to attach a pod network interface.
Defaults to true.
type: boolean
autoattachSerialConsole:
description: Whether to attach the default virtio-serial
console or not. Serial console access will not be available
if set to false. Defaults to true.
type: boolean
autoattachVSOCK:
description: Whether to attach the VSOCK CID to the VM or
not. VSOCK access will be available if set to true. Defaults
to false.
type: boolean
blockMultiQueue:
description: Whether or not to enable virtio multi-queue
for block devices. Defaults to false.
type: boolean
clientPassthrough:
description: To configure and access client devices such
as redirecting USB
type: object
disableHotplug:
description: DisableHotplug disabled the ability to hotplug
disks.
type: boolean
disks:
description: Disks describes disks, cdroms and luns which
are connected to the vmi.
items:
properties:
blockSize:
description: If specified, the virtual disk will be
presented with the given block sizes.
properties:
custom:
description: CustomBlockSize represents the desired
logical and physical block size for a VM disk.
properties:
logical:
type: integer
physical:
type: integer
required:
- logical
- physical
type: object
matchVolume:
description: Represents if a feature is enabled
or disabled.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
type: object
type: object
bootOrder:
description: BootOrder is an integer value > 0, used
to determine ordering of boot devices. Lower values
take precedence. Each disk or interface that has
a boot order must have a unique value. Disks without
a boot order are not tried if a disk with a boot
order exists.
type: integer
cache:
description: 'Cache specifies which kvm disk cache
mode should be used. Supported values are: CacheNone,
CacheWriteThrough.'
type: string
cdrom:
description: Attach a volume as a cdrom to the vmi.
properties:
bus:
description: 'Bus indicates the type of disk device
to emulate. supported values: virtio, sata,
scsi.'
type: string
readonly:
description: ReadOnly. Defaults to true.
type: boolean
tray:
description: Tray indicates if the tray of the
device is open or closed. Allowed values are
"open" and "closed". Defaults to closed.
type: string
type: object
dedicatedIOThread:
description: dedicatedIOThread indicates this disk
should have an exclusive IO Thread. Enabling this
implies useIOThreads = true. Defaults to false.
type: boolean
disk:
description: Attach a volume as a disk to the vmi.
properties:
bus:
description: 'Bus indicates the type of disk device
to emulate. supported values: virtio, sata,
scsi, usb.'
type: string
pciAddress:
description: 'If specified, the virtual disk will
be placed on the guests pci address with the
specified PCI address. For example: 0000:81:01.10'
type: string
readonly:
description: ReadOnly. Defaults to false.
type: boolean
type: object
errorPolicy:
description: If specified, it can change the default
error policy (stop) for the disk
type: string
io:
description: 'IO specifies which QEMU disk IO mode
should be used. Supported values are: native, default,
threads.'
type: string
lun:
description: Attach a volume as a LUN to the vmi.
properties:
bus:
description: 'Bus indicates the type of disk device
to emulate. supported values: virtio, sata,
scsi.'
type: string
readonly:
description: ReadOnly. Defaults to false.
type: boolean
reservation:
description: Reservation indicates if the disk
needs to support the persistent reservation
for the SCSI disk
type: boolean
type: object
name:
description: Name is the device name
type: string
serial:
description: Serial provides the ability to specify
a serial number for the disk device.
type: string
shareable:
description: If specified the disk is made sharable
and multiple write from different VMs are permitted
type: boolean
tag:
description: If specified, disk address and its tag
will be provided to the guest via config drive metadata
type: string
required:
- name
type: object
type: array
downwardMetrics:
description: DownwardMetrics creates a virtio serials for
exposing the downward metrics to the vmi.
type: object
filesystems:
description: Filesystems describes filesystem which is connected
to the vmi.
items:
properties:
name:
description: Name is the device name
type: string
virtiofs:
description: Virtiofs is supported
type: object
required:
- name
- virtiofs
type: object
type: array
x-kubernetes-list-type: atomic
gpus:
description: Whether to attach a GPU device to the vmi.
items:
properties:
deviceName:
type: string
name:
description: Name of the GPU device as exposed by
a device plugin
type: string
tag:
description: If specified, the virtual network interface
address and its tag will be provided to the guest
via config drive
type: string
virtualGPUOptions:
properties:
display:
properties:
enabled:
description: Enabled determines if a display
addapter backed by a vGPU should be enabled
or disabled on the guest. Defaults to true.
type: boolean
ramFB:
description: Enables a boot framebuffer, until
the guest OS loads a real GPU driver Defaults
to true.
properties:
enabled:
description: Enabled determines if the
feature should be enabled or disabled
on the guest. Defaults to true.
type: boolean
type: object
type: object
type: object
required:
- deviceName
- name
type: object
type: array
x-kubernetes-list-type: atomic
hostDevices:
description: Whether to attach a host device to the vmi.
items:
properties:
deviceName:
description: DeviceName is the resource name of the
host device exposed by a device plugin
type: string
name:
type: string
tag:
description: If specified, the virtual network interface
address and its tag will be provided to the guest
via config drive
type: string
required:
- deviceName
- name
type: object
type: array
x-kubernetes-list-type: atomic
inputs:
description: Inputs describe input devices
items:
properties:
bus:
description: 'Bus indicates the bus of input device
to emulate. Supported values: virtio, usb.'
type: string
name:
description: Name is the device name
type: string
type:
description: 'Type indicated the type of input device.
Supported values: tablet.'
type: string
required:
- name
- type
type: object
type: array
interfaces:
description: Interfaces describe network interfaces which
are added to the vmi.
items:
properties:
acpiIndex:
description: If specified, the ACPI index is used
to provide network interface device naming, that
is stable across changes in PCI addresses assigned
to the device. This value is required to be unique
across all devices and be between 1 and (16*1024-1).
type: integer
binding:
description: 'Binding specifies the binding plugin
that will be used to connect the interface to the
guest. It provides an alternative to InterfaceBindingMethod.
version: 1alphav1'
properties:
name:
description: 'Name references to the binding name
as denined in the kubevirt CR. version: 1alphav1'
type: string
required:
- name
type: object
bootOrder:
description: BootOrder is an integer value > 0, used
to determine ordering of boot devices. Lower values
take precedence. Each interface or disk that has
a boot order must have a unique value. Interfaces
without a boot order are not tried.
type: integer
bridge:
description: InterfaceBridge connects to a given network
via a linux bridge.
type: object
dhcpOptions:
description: If specified the network interface will
pass additional DHCP options to the VMI
properties:
bootFileName:
description: If specified will pass option 67
to interface's DHCP server
type: string
ntpServers:
description: If specified will pass the configured
NTP server to the VM via DHCP option 042.
items:
type: string
type: array
privateOptions:
description: 'If specified will pass extra DHCP
options for private use, range: 224-254'
items:
description: DHCPExtraOptions defines Extra
DHCP options for a VM.
properties:
option:
description: Option is an Integer value
from 224-254 Required.
type: integer
value:
description: Value is a String value for
the Option provided Required.
type: string
required:
- option
- value
type: object
type: array
tftpServerName:
description: If specified will pass option 66
to interface's DHCP server
type: string
type: object
macAddress:
description: 'Interface MAC address. For example:
de:ad:00:00:be:af or DE-AD-00-00-BE-AF.'
type: string
macvtap:
description: Deprecated, please refer to Kubevirt
user guide for alternatives.
type: object
masquerade:
description: InterfaceMasquerade connects to a given
network using netfilter rules to nat the traffic.
type: object
model:
description: 'Interface model. One of: e1000, e1000e,
ne2k_pci, pcnet, rtl8139, virtio. Defaults to virtio.
TODO:(ihar) switch to enums once opengen-api supports
them. See: https://github.com/kubernetes/kube-openapi/issues/51'
type: string
name:
description: Logical name of the interface as well
as a reference to the associated networks. Must
match the Name of a Network.
type: string
passt:
description: Deprecated, please refer to Kubevirt
user guide for alternatives.
type: object
pciAddress:
description: 'If specified, the virtual network interface
will be placed on the guests pci address with the
specified PCI address. For example: 0000:81:01.10'
type: string
ports:
description: List of ports to be forwarded to the
virtual machine.
items:
description: Port represents a port to expose from
the virtual machine. Default protocol TCP. The
port field is mandatory
properties:
name:
description: If specified, this must be an IANA_SVC_NAME
and unique within the pod. Each named port
in a pod must have a unique name. Name for
the port that can be referred to by services.
type: string
port:
description: Number of port to expose for the
virtual machine. This must be a valid port
number, 0 < x < 65536.
format: int32
type: integer
protocol:
description: Protocol for port. Must be UDP
or TCP. Defaults to "TCP".
type: string
required:
- port
type: object
type: array
slirp:
description: InterfaceSlirp connects to a given network
using QEMU user networking mode.
type: object
sriov:
description: InterfaceSRIOV connects to a given network
by passing-through an SR-IOV PCI device via vfio.
type: object
state:
description: State represents the requested operational
state of the interface. The (only) value supported
is 'absent', expressing a request to remove the
interface.
type: string
tag:
description: If specified, the virtual network interface
address and its tag will be provided to the guest
via config drive
type: string
required:
- name
type: object
type: array
logSerialConsole:
description: Whether to log the auto-attached default serial
console or not. Serial console logs will be collect to
a file and then streamed from a named 'guest-console-log'.
Not relevant if autoattachSerialConsole is disabled. Defaults
to cluster wide setting on VirtualMachineOptions.
type: boolean
networkInterfaceMultiqueue:
description: If specified, virtual network interfaces configured
with a virtio bus will also enable the vhost multiqueue
feature for network devices. The number of queues created
depends on additional factors of the VirtualMachineInstance,
like the number of guest CPUs.
type: boolean
rng:
description: Whether to have random number generator from
host
type: object
sound:
description: Whether to emulate a sound device.
properties:
model:
description: 'We only support ich9 or ac97. If SoundDevice
is not set: No sound card is emulated. If SoundDevice
is set but Model is not: ich9'
type: string
name:
description: User's defined name for this sound device
type: string
required:
- name
type: object
tpm:
description: Whether to emulate a TPM device.
properties:
persistent:
description: Persistent indicates the state of the TPM
device should be kept accross reboots Defaults to
false
type: boolean
type: object
useVirtioTransitional:
description: Fall back to legacy virtio 0.9 support if virtio
bus is selected on devices. This is helpful for old machines
like CentOS6 or RHEL6 which do not understand virtio_non_transitional
(virtio 1.0).
type: boolean
watchdog:
description: Watchdog describes a watchdog device which
can be added to the vmi.
properties:
i6300esb:
description: i6300esb watchdog device.
properties:
action:
description: The action to take. Valid values are
poweroff, reset, shutdown. Defaults to reset.
type: string
type: object
name:
description: Name of the watchdog.
type: string
required:
- name
type: object
type: object
features:
description: Features like acpi, apic, hyperv, smm.
properties:
acpi:
description: ACPI enables/disables ACPI inside the guest.
Defaults to enabled.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
apic:
description: Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults to true.
type: boolean
endOfInterrupt:
description: EndOfInterrupt enables the end of interrupt
notification in the guest. Defaults to false.
type: boolean
type: object
hyperv:
description: Defaults to the machine type setting.
properties:
evmcs:
description: EVMCS Speeds up L2 vmexits, but disables
other virtualization features. Requires vapic. Defaults
to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
type: object
frequencies:
description: Frequencies improves the TSC clock source
handling for Hyper-V on KVM. Defaults to the machine
type setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
type: object
ipi:
description: IPI improves performances in overcommited
environments. Requires vpindex. Defaults to the machine
type setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
type: object
reenlightenment:
description: Reenlightenment enables the notifications
on TSC frequency changes. Defaults to the machine
type setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
type: object
relaxed:
description: Relaxed instructs the guest OS to disable
watchdog timeouts. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
type: object
reset:
description: Reset enables Hyperv reboot/reset for the
vmi. Requires synic. Defaults to the machine type
setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
type: object
runtime:
description: Runtime improves the time accounting to
improve scheduling in the guest. Defaults to the machine
type setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
type: object
spinlocks:
description: Spinlocks allows to configure the spinlock
retry attempts.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
spinlocks:
description: Retries indicates the number of retries.
Must be a value greater or equal 4096. Defaults
to 4096.
format: int32
type: integer
type: object
synic:
description: SyNIC enables the Synthetic Interrupt Controller.
Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
type: object
synictimer:
description: SyNICTimer enables Synthetic Interrupt
Controller Timers, reducing CPU load. Defaults to
the machine type setting.
properties:
direct:
description: Represents if a feature is enabled
or disabled.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
type: object
enabled:
type: boolean
type: object
tlbflush:
description: TLBFlush improves performances in overcommited
environments. Requires vpindex. Defaults to the machine
type setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
type: object
vapic:
description: VAPIC improves the paravirtualized handling
of interrupts. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
type: object
vendorid:
description: VendorID allows setting the hypervisor
vendor id. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
vendorid:
description: VendorID sets the hypervisor vendor
id, visible to the vmi. String up to twelve characters.
type: string
type: object
vpindex:
description: VPIndex enables the Virtual Processor Index
to help windows identifying virtual processors. Defaults
to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
type: object
type: object
kvm:
description: Configure how KVM presence is exposed to the
guest.
properties:
hidden:
description: Hide the KVM hypervisor from standard MSR
based discovery. Defaults to false
type: boolean
type: object
pvspinlock:
description: Notify the guest that the host supports paravirtual
spinlocks. For older kernels this feature should be explicitly
disabled.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
smm:
description: SMM enables/disables System Management Mode.
TSEG not yet implemented.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
type: object
firmware:
description: Firmware.
properties:
acpi:
description: Information that can be set in the ACPI table
properties:
slicNameRef:
description: 'SlicNameRef should match the volume name
of a secret object. The data in the secret should
be a binary blob that follows the ACPI SLIC standard,
see: https://learn.microsoft.com/en-us/previous-versions/windows/hardware/design/dn653305(v=vs.85)'
type: string
type: object
bootloader:
description: Settings to control the bootloader that is
used.
properties:
bios:
description: If set (default), BIOS will be used.
properties:
useSerial:
description: If set, the BIOS output will be transmitted
over serial
type: boolean
type: object
efi:
description: If set, EFI will be used instead of BIOS.
properties:
persistent:
description: If set to true, Persistent will persist
the EFI NVRAM across reboots. Defaults to false
type: boolean
secureBoot:
description: If set, SecureBoot will be enabled
and the OVMF roms will be swapped for SecureBoot-enabled
ones. Requires SMM to be enabled. Defaults to
true
type: boolean
type: object
type: object
kernelBoot:
description: Settings to set the kernel for booting.
properties:
container:
description: Container defines the container that containes
kernel artifacts
properties:
image:
description: Image that contains initrd / kernel
files.
type: string
imagePullPolicy:
description: 'Image pull policy. One of Always,
Never, IfNotPresent. Defaults to Always if :latest
tag is specified, or IfNotPresent otherwise. Cannot
be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images'
type: string
imagePullSecret:
description: ImagePullSecret is the name of the
Docker registry secret required to pull the image.
The secret must already exist.
type: string
initrdPath:
description: the fully-qualified path to the ramdisk
image in the host OS
type: string
kernelPath:
description: The fully-qualified path to the kernel
image in the host OS
type: string
required:
- image
type: object
kernelArgs:
description: Arguments to be passed to the kernel at
boot time
type: string
type: object
serial:
description: The system-serial-number in SMBIOS
type: string
uuid:
description: UUID reported by the vmi bios. Defaults to
a random generated uid.
type: string
type: object
ioThreadsPolicy:
description: 'Controls whether or not disks will share IOThreads.
Omitting IOThreadsPolicy disables use of IOThreads. One of:
shared, auto'
type: string
launchSecurity:
description: Launch Security setting of the vmi.
properties:
sev:
description: AMD Secure Encrypted Virtualization (SEV).
properties:
attestation:
description: If specified, run the attestation process
for a vmi.
type: object
dhCert:
description: Base64 encoded guest owner's Diffie-Hellman
key.
type: string
policy:
description: 'Guest policy flags as defined in AMD SEV
API specification. Note: due to security reasons it
is not allowed to enable guest debugging. Therefore
NoDebug flag is not exposed to users and is always
true.'
properties:
encryptedState:
description: SEV-ES is required. Defaults to false.
type: boolean
type: object
session:
description: Base64 encoded session blob.
type: string
type: object
type: object
machine:
description: Machine type.
properties:
type:
description: QEMU machine type is the actual chipset of
the VirtualMachineInstance.
type: string
type: object
memory:
description: Memory allow specifying the VMI memory features.
properties:
guest:
anyOf:
- type: integer
- type: string
description: Guest allows to specifying the amount of memory
which is visible inside the Guest OS. The Guest must lie
between Requests and Limits from the resources section.
Defaults to the requested memory in the resources section
if not specified.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
hugepages:
description: Hugepages allow to use hugepages for the VirtualMachineInstance
instead of regular memory.
properties:
pageSize:
description: PageSize specifies the hugepage size, for
x86_64 architecture valid values are 1Gi and 2Mi.
type: string
type: object
maxGuest:
anyOf:
- type: integer
- type: string
description: MaxGuest allows to specify the maximum amount
of memory which is visible inside the Guest OS. The delta
between MaxGuest and Guest is the amount of memory that
can be hot(un)plugged.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
type: object
resources:
description: Resources describes the Compute Resources required
by this vmi.
properties:
limits:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: Limits describes the maximum amount of compute
resources allowed. Valid resource keys are "memory" and
"cpu".
type: object
overcommitGuestOverhead:
description: Don't ask the scheduler to take the guest-management
overhead into account. Instead put the overhead only into
the container's memory limit. This can lead to crashes
if all memory is in use on a node. Defaults to false.
type: boolean
requests:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: Requests is a description of the initial vmi
resources. Valid resource keys are "memory" and "cpu".
type: object
type: object
required:
- devices
type: object
evictionStrategy:
description: 'EvictionStrategy describes the strategy to follow
when a node drain occurs. The possible options are: - "None":
No action will be taken, according to the specified ''RunStrategy''
the VirtualMachine will be restarted or shutdown. - "LiveMigrate":
the VirtualMachineInstance will be migrated instead of being shutdown.
- "LiveMigrateIfPossible": the same as "LiveMigrate" but only
if the VirtualMachine is Live-Migratable, otherwise it will behave
as "None". - "External": the VirtualMachineInstance will be protected
by a PDB and ''vmi.Status.EvacuationNodeName'' will be set on
eviction. This is mainly useful for cluster-api-provider-kubevirt
(capk) which needs a way for VMI''s to be blocked from eviction,
yet signal capk that eviction has been called on the VMI so the
capk controller can handle tearing the VMI down. Details can be
found in the commit description https://github.com/kubevirt/kubevirt/commit/c1d77face705c8b126696bac9a3ee3825f27f1fa.'
type: string
hostname:
description: Specifies the hostname of the vmi If not specified,
the hostname will be set to the name of the vmi, if dhcp or cloud-init
is configured properly.
type: string
livenessProbe:
description: 'Periodic probe of VirtualMachineInstance liveness.
VirtualmachineInstances will be stopped if the probe fails. Cannot
be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
properties:
exec:
description: One and only one of the following should be specified.
Exec specifies the action to take, it will be executed on
the guest through the qemu-guest-agent. If the guest agent
is not available, this probe will fail.
properties:
command:
description: Command is the command line to execute inside
the container, the working directory for the command is
root ('/') in the container's filesystem. The command
is simply exec'd, it is not run inside a shell, so traditional
shell instructions ('|', etc) won't work. To use a shell,
you need to explicitly call out to that shell. Exit status
of 0 is treated as live/healthy and non-zero is unhealthy.
items:
type: string
type: array
type: object
failureThreshold:
description: Minimum consecutive failures for the probe to be
considered failed after having succeeded. Defaults to 3. Minimum
value is 1.
format: int32
type: integer
guestAgentPing:
description: GuestAgentPing contacts the qemu-guest-agent for
availability checks.
type: object
httpGet:
description: HTTPGet specifies the http request to perform.
properties:
host:
description: Host name to connect to, defaults to the pod
IP. You probably want to set "Host" in httpHeaders instead.
type: string
httpHeaders:
description: Custom headers to set in the request. HTTP
allows repeated headers.
items:
description: HTTPHeader describes a custom header to be
used in HTTP probes
properties:
name:
description: The header field name
type: string
value:
description: The header field value
type: string
required:
- name
- value
type: object
type: array
path:
description: Path to access on the HTTP server.
type: string
port:
anyOf:
- type: integer
- type: string
description: Name or number of the port to access on the
container. Number must be in the range 1 to 65535. Name
must be an IANA_SVC_NAME.
x-kubernetes-int-or-string: true
scheme:
description: Scheme to use for connecting to the host. Defaults
to HTTP.
type: string
required:
- port
type: object
initialDelaySeconds:
description: 'Number of seconds after the VirtualMachineInstance
has started before liveness probes are initiated. More info:
https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
format: int32
type: integer
periodSeconds:
description: How often (in seconds) to perform the probe. Default
to 10 seconds. Minimum value is 1.
format: int32
type: integer
successThreshold:
description: Minimum consecutive successes for the probe to
be considered successful after having failed. Defaults to
1. Must be 1 for liveness. Minimum value is 1.
format: int32
type: integer
tcpSocket:
description: 'TCPSocket specifies an action involving a TCP
port. TCP hooks not yet supported TODO: implement a realistic
TCP lifecycle hook'
properties:
host:
description: 'Optional: Host name to connect to, defaults
to the pod IP.'
type: string
port:
anyOf:
- type: integer
- type: string
description: Number or name of the port to access on the
container. Number must be in the range 1 to 65535. Name
must be an IANA_SVC_NAME.
x-kubernetes-int-or-string: true
required:
- port
type: object
timeoutSeconds:
description: 'Number of seconds after which the probe times
out. For exec probes the timeout fails the probe but does
not terminate the command running on the guest. This means
a blocking command can result in an increasing load on the
guest. A small buffer will be added to the resulting workload
exec probe to compensate for delays caused by the qemu guest
exec mechanism. Defaults to 1 second. Minimum value is 1.
More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
format: int32
type: integer
type: object
networks:
description: List of networks that can be attached to a vm's virtual
interface.
items:
description: Network represents a network type and a resource
that should be connected to the vm.
properties:
multus:
description: Represents the multus cni network.
properties:
default:
description: Select the default network and add it to
the multus-cni.io/default-network annotation.
type: boolean
networkName:
description: 'References to a NetworkAttachmentDefinition
CRD object. Format: <networkName>, <namespace>/<networkName>.
If namespace is not specified, VMI namespace is assumed.'
type: string
required:
- networkName
type: object
name:
description: 'Network name. Must be a DNS_LABEL and unique
within the vm. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names'
type: string
pod:
description: Represents the stock pod network interface.
properties:
vmIPv6NetworkCIDR:
description: IPv6 CIDR for the vm network. Defaults to
fd10:0:2::/120 if not specified.
type: string
vmNetworkCIDR:
description: CIDR for vm network. Default 10.0.2.0/24
if not specified.
type: string
type: object
required:
- name
type: object
type: array
nodeSelector:
additionalProperties:
type: string
description: 'NodeSelector is a selector which must be true for
the vmi to fit on a node. Selector which must match a node''s
labels for the vmi to be scheduled on that node. More info: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/'
type: object
priorityClassName:
description: If specified, indicates the pod's priority. If not
specified, the pod priority will be default or zero if there is
no default.
type: string
readinessProbe:
description: 'Periodic probe of VirtualMachineInstance service readiness.
VirtualmachineInstances will be removed from service endpoints
if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
properties:
exec:
description: One and only one of the following should be specified.
Exec specifies the action to take, it will be executed on
the guest through the qemu-guest-agent. If the guest agent
is not available, this probe will fail.
properties:
command:
description: Command is the command line to execute inside
the container, the working directory for the command is
root ('/') in the container's filesystem. The command
is simply exec'd, it is not run inside a shell, so traditional
shell instructions ('|', etc) won't work. To use a shell,
you need to explicitly call out to that shell. Exit status
of 0 is treated as live/healthy and non-zero is unhealthy.
items:
type: string
type: array
type: object
failureThreshold:
description: Minimum consecutive failures for the probe to be
considered failed after having succeeded. Defaults to 3. Minimum
value is 1.
format: int32
type: integer
guestAgentPing:
description: GuestAgentPing contacts the qemu-guest-agent for
availability checks.
type: object
httpGet:
description: HTTPGet specifies the http request to perform.
properties:
host:
description: Host name to connect to, defaults to the pod
IP. You probably want to set "Host" in httpHeaders instead.
type: string
httpHeaders:
description: Custom headers to set in the request. HTTP
allows repeated headers.
items:
description: HTTPHeader describes a custom header to be
used in HTTP probes
properties:
name:
description: The header field name
type: string
value:
description: The header field value
type: string
required:
- name
- value
type: object
type: array
path:
description: Path to access on the HTTP server.
type: string
port:
anyOf:
- type: integer
- type: string
description: Name or number of the port to access on the
container. Number must be in the range 1 to 65535. Name
must be an IANA_SVC_NAME.
x-kubernetes-int-or-string: true
scheme:
description: Scheme to use for connecting to the host. Defaults
to HTTP.
type: string
required:
- port
type: object
initialDelaySeconds:
description: 'Number of seconds after the VirtualMachineInstance
has started before liveness probes are initiated. More info:
https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
format: int32
type: integer
periodSeconds:
description: How often (in seconds) to perform the probe. Default
to 10 seconds. Minimum value is 1.
format: int32
type: integer
successThreshold:
description: Minimum consecutive successes for the probe to
be considered successful after having failed. Defaults to
1. Must be 1 for liveness. Minimum value is 1.
format: int32
type: integer
tcpSocket:
description: 'TCPSocket specifies an action involving a TCP
port. TCP hooks not yet supported TODO: implement a realistic
TCP lifecycle hook'
properties:
host:
description: 'Optional: Host name to connect to, defaults
to the pod IP.'
type: string
port:
anyOf:
- type: integer
- type: string
description: Number or name of the port to access on the
container. Number must be in the range 1 to 65535. Name
must be an IANA_SVC_NAME.
x-kubernetes-int-or-string: true
required:
- port
type: object
timeoutSeconds:
description: 'Number of seconds after which the probe times
out. For exec probes the timeout fails the probe but does
not terminate the command running on the guest. This means
a blocking command can result in an increasing load on the
guest. A small buffer will be added to the resulting workload
exec probe to compensate for delays caused by the qemu guest
exec mechanism. Defaults to 1 second. Minimum value is 1.
More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
format: int32
type: integer
type: object
schedulerName:
description: If specified, the VMI will be dispatched by specified
scheduler. If not specified, the VMI will be dispatched by default
scheduler.
type: string
startStrategy:
description: StartStrategy can be set to "Paused" if Virtual Machine
should be started in paused state.
type: string
subdomain:
description: If specified, the fully qualified vmi hostname will
be "<hostname>.<subdomain>.<pod namespace>.svc.<cluster domain>".
If not specified, the vmi will not have a domainname at all. The
DNS entry will resolve to the vmi, no matter if the vmi itself
can pick up a hostname.
type: string
terminationGracePeriodSeconds:
description: Grace period observed after signalling a VirtualMachineInstance
to stop after which the VirtualMachineInstance is force terminated.
format: int64
type: integer
tolerations:
description: If toleration is specified, obey all the toleration
rules.
items:
description: The pod this Toleration is attached to tolerates
any taint that matches the triple <key,value,effect> using the
matching operator <operator>.
properties:
effect:
description: Effect indicates the taint effect to match. Empty
means match all taint effects. When specified, allowed values
are NoSchedule, PreferNoSchedule and NoExecute.
type: string
key:
description: Key is the taint key that the toleration applies
to. Empty means match all taint keys. If the key is empty,
operator must be Exists; this combination means to match
all values and all keys.
type: string
operator:
description: Operator represents a key's relationship to the
value. Valid operators are Exists and Equal. Defaults to
Equal. Exists is equivalent to wildcard for value, so that
a pod can tolerate all taints of a particular category.
type: string
tolerationSeconds:
description: TolerationSeconds represents the period of time
the toleration (which must be of effect NoExecute, otherwise
this field is ignored) tolerates the taint. By default,
it is not set, which means tolerate the taint forever (do
not evict). Zero and negative values will be treated as
0 (evict immediately) by the system.
format: int64
type: integer
value:
description: Value is the taint value the toleration matches
to. If the operator is Exists, the value should be empty,
otherwise just a regular string.
type: string
type: object
type: array
topologySpreadConstraints:
description: TopologySpreadConstraints describes how a group of
VMIs will be spread across a given topology domains. K8s scheduler
will schedule VMI pods in a way which abides by the constraints.
items:
description: TopologySpreadConstraint specifies how to spread
matching pods among the given topology.
properties:
labelSelector:
description: LabelSelector is used to find matching pods.
Pods that match this label selector are counted to determine
the number of pods in their corresponding topology domain.
properties:
matchExpressions:
description: matchExpressions is a list of label selector
requirements. The requirements are ANDed.
items:
description: A label selector requirement is a selector
that contains values, a key, and an operator that
relates the key and values.
properties:
key:
description: key is the label key that the selector
applies to.
type: string
operator:
description: operator represents a key's relationship
to a set of values. Valid operators are In, NotIn,
Exists and DoesNotExist.
type: string
values:
description: values is an array of string values.
If the operator is In or NotIn, the values array
must be non-empty. If the operator is Exists or
DoesNotExist, the values array must be empty.
This array is replaced during a strategic merge
patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value} pairs.
A single {key,value} in the matchLabels map is equivalent
to an element of matchExpressions, whose key field is
"key", the operator is "In", and the values array contains
only "value". The requirements are ANDed.
type: object
type: object
matchLabelKeys:
description: MatchLabelKeys is a set of pod label keys to
select the pods over which spreading will be calculated.
The keys are used to lookup values from the incoming pod
labels, those key-value labels are ANDed with labelSelector
to select the group of existing pods over which spreading
will be calculated for the incoming pod. Keys that don't
exist in the incoming pod labels will be ignored. A null
or empty list means only match against labelSelector.
items:
type: string
type: array
x-kubernetes-list-type: atomic
maxSkew:
description: 'MaxSkew describes the degree to which pods may
be unevenly distributed. When ''whenUnsatisfiable=DoNotSchedule'',
it is the maximum permitted difference between the number
of matching pods in the target topology and the global minimum.
The global minimum is the minimum number of matching pods
in an eligible domain or zero if the number of eligible
domains is less than MinDomains. For example, in a 3-zone
cluster, MaxSkew is set to 1, and pods with the same labelSelector
spread as 2/2/1: In this case, the global minimum is 1.
| zone1 | zone2 | zone3 | | P P | P P | P | - if
MaxSkew is 1, incoming pod can only be scheduled to zone3
to become 2/2/2; scheduling it onto zone1(zone2) would make
the ActualSkew(3-1) on zone1(zone2) violate MaxSkew(1).
- if MaxSkew is 2, incoming pod can be scheduled onto any
zone. When ''whenUnsatisfiable=ScheduleAnyway'', it is used
to give higher precedence to topologies that satisfy it.
It''s a required field. Default value is 1 and 0 is not
allowed.'
format: int32
type: integer
minDomains:
description: "MinDomains indicates a minimum number of eligible
domains. When the number of eligible domains with matching
topology keys is less than minDomains, Pod Topology Spread
treats \"global minimum\" as 0, and then the calculation
of Skew is performed. And when the number of eligible domains
with matching topology keys equals or greater than minDomains,
this value has no effect on scheduling. As a result, when
the number of eligible domains is less than minDomains,
scheduler won't schedule more than maxSkew Pods to those
domains. If value is nil, the constraint behaves as if MinDomains
is equal to 1. Valid values are integers greater than 0.
When value is not nil, WhenUnsatisfiable must be DoNotSchedule.
\n For example, in a 3-zone cluster, MaxSkew is set to 2,
MinDomains is set to 5 and pods with the same labelSelector
spread as 2/2/2: | zone1 | zone2 | zone3 | | P P | P
P | P P | The number of domains is less than 5(MinDomains),
so \"global minimum\" is treated as 0. In this situation,
new pod with the same labelSelector cannot be scheduled,
because computed skew will be 3(3 - 0) if new Pod is scheduled
to any of the three zones, it will violate MaxSkew. \n This
is a beta field and requires the MinDomainsInPodTopologySpread
feature gate to be enabled (enabled by default)."
format: int32
type: integer
nodeAffinityPolicy:
description: "NodeAffinityPolicy indicates how we will treat
Pod's nodeAffinity/nodeSelector when calculating pod topology
spread skew. Options are: - Honor: only nodes matching nodeAffinity/nodeSelector
are included in the calculations. - Ignore: nodeAffinity/nodeSelector
are ignored. All nodes are included in the calculations.
\n If this value is nil, the behavior is equivalent to the
Honor policy. This is a beta-level feature default enabled
by the NodeInclusionPolicyInPodTopologySpread feature flag."
type: string
nodeTaintsPolicy:
description: "NodeTaintsPolicy indicates how we will treat
node taints when calculating pod topology spread skew. Options
are: - Honor: nodes without taints, along with tainted nodes
for which the incoming pod has a toleration, are included.
- Ignore: node taints are ignored. All nodes are included.
\n If this value is nil, the behavior is equivalent to the
Ignore policy. This is a beta-level feature default enabled
by the NodeInclusionPolicyInPodTopologySpread feature flag."
type: string
topologyKey:
description: TopologyKey is the key of node labels. Nodes
that have a label with this key and identical values are
considered to be in the same topology. We consider each
<key, value> as a "bucket", and try to put balanced number
of pods into each bucket. We define a domain as a particular
instance of a topology. Also, we define an eligible domain
as a domain whose nodes meet the requirements of nodeAffinityPolicy
and nodeTaintsPolicy. e.g. If TopologyKey is "kubernetes.io/hostname",
each Node is a domain of that topology. And, if TopologyKey
is "topology.kubernetes.io/zone", each zone is a domain
of that topology. It's a required field.
type: string
whenUnsatisfiable:
description: 'WhenUnsatisfiable indicates how to deal with
a pod if it doesn''t satisfy the spread constraint. - DoNotSchedule
(default) tells the scheduler not to schedule it. - ScheduleAnyway
tells the scheduler to schedule the pod in any location, but
giving higher precedence to topologies that would help reduce
the skew. A constraint is considered "Unsatisfiable" for
an incoming pod if and only if every possible node assignment
for that pod would violate "MaxSkew" on some topology. For
example, in a 3-zone cluster, MaxSkew is set to 1, and pods
with the same labelSelector spread as 3/1/1: | zone1 | zone2
| zone3 | | P P P | P | P | If WhenUnsatisfiable
is set to DoNotSchedule, incoming pod can only be scheduled
to zone2(zone3) to become 3/2/1(3/1/2) as ActualSkew(2-1)
on zone2(zone3) satisfies MaxSkew(1). In other words, the
cluster can still be imbalanced, but scheduler won''t make
it *more* imbalanced. It''s a required field.'
type: string
required:
- maxSkew
- topologyKey
- whenUnsatisfiable
type: object
type: array
x-kubernetes-list-map-keys:
- topologyKey
- whenUnsatisfiable
x-kubernetes-list-type: map
volumes:
description: List of volumes that can be mounted by disks belonging
to the vmi.
items:
description: Volume represents a named volume in a vmi.
properties:
cloudInitConfigDrive:
description: 'CloudInitConfigDrive represents a cloud-init
Config Drive user-data source. The Config Drive data will
be added as a disk to the vmi. A proper cloud-init installation
is required inside the guest. More info: https://cloudinit.readthedocs.io/en/latest/topics/datasources/configdrive.html'
properties:
networkData:
description: NetworkData contains config drive inline
cloud-init networkdata.
type: string
networkDataBase64:
description: NetworkDataBase64 contains config drive cloud-init
networkdata as a base64 encoded string.
type: string
networkDataSecretRef:
description: NetworkDataSecretRef references a k8s secret
that contains config drive networkdata.
properties:
name:
description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind,
uid?'
type: string
type: object
secretRef:
description: UserDataSecretRef references a k8s secret
that contains config drive userdata.
properties:
name:
description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind,
uid?'
type: string
type: object
userData:
description: UserData contains config drive inline cloud-init
userdata.
type: string
userDataBase64:
description: UserDataBase64 contains config drive cloud-init
userdata as a base64 encoded string.
type: string
type: object
cloudInitNoCloud:
description: 'CloudInitNoCloud represents a cloud-init NoCloud
user-data source. The NoCloud data will be added as a disk
to the vmi. A proper cloud-init installation is required
inside the guest. More info: http://cloudinit.readthedocs.io/en/latest/topics/datasources/nocloud.html'
properties:
networkData:
description: NetworkData contains NoCloud inline cloud-init
networkdata.
type: string
networkDataBase64:
description: NetworkDataBase64 contains NoCloud cloud-init
networkdata as a base64 encoded string.
type: string
networkDataSecretRef:
description: NetworkDataSecretRef references a k8s secret
that contains NoCloud networkdata.
properties:
name:
description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind,
uid?'
type: string
type: object
secretRef:
description: UserDataSecretRef references a k8s secret
that contains NoCloud userdata.
properties:
name:
description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind,
uid?'
type: string
type: object
userData:
description: UserData contains NoCloud inline cloud-init
userdata.
type: string
userDataBase64:
description: UserDataBase64 contains NoCloud cloud-init
userdata as a base64 encoded string.
type: string
type: object
configMap:
description: 'ConfigMapSource represents a reference to a
ConfigMap in the same namespace. More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-pod-configmap/'
properties:
name:
description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind, uid?'
type: string
optional:
description: Specify whether the ConfigMap or it's keys
must be defined
type: boolean
volumeLabel:
description: The volume label of the resulting disk inside
the VMI. Different bootstrapping mechanisms require
different values. Typical values are "cidata" (cloud-init),
"config-2" (cloud-init) or "OEMDRV" (kickstart).
type: string
type: object
containerDisk:
description: 'ContainerDisk references a docker image, embedding
a qcow or raw disk. More info: https://kubevirt.gitbooks.io/user-guide/registry-disk.html'
properties:
image:
description: Image is the name of the image with the embedded
disk.
type: string
imagePullPolicy:
description: 'Image pull policy. One of Always, Never,
IfNotPresent. Defaults to Always if :latest tag is specified,
or IfNotPresent otherwise. Cannot be updated. More info:
https://kubernetes.io/docs/concepts/containers/images#updating-images'
type: string
imagePullSecret:
description: ImagePullSecret is the name of the Docker
registry secret required to pull the image. The secret
must already exist.
type: string
path:
description: Path defines the path to disk file in the
container
type: string
required:
- image
type: object
dataVolume:
description: DataVolume represents the dynamic creation a
PVC for this volume as well as the process of populating
that PVC with a disk image.
properties:
hotpluggable:
description: Hotpluggable indicates whether the volume
can be hotplugged and hotunplugged.
type: boolean
name:
description: Name of both the DataVolume and the PVC in
the same namespace. After PVC population the DataVolume
is garbage collected by default.
type: string
required:
- name
type: object
downwardAPI:
description: DownwardAPI represents downward API about the
pod that should populate this volume
properties:
fields:
description: Fields is a list of downward API volume file
items:
description: DownwardAPIVolumeFile represents information
to create the file containing the pod field
properties:
fieldRef:
description: 'Required: Selects a field of the pod:
only annotations, labels, name and namespace are
supported.'
properties:
apiVersion:
description: Version of the schema the FieldPath
is written in terms of, defaults to "v1".
type: string
fieldPath:
description: Path of the field to select in
the specified API version.
type: string
required:
- fieldPath
type: object
mode:
description: 'Optional: mode bits used to set permissions
on this file, must be an octal value between 0000
and 0777 or a decimal value between 0 and 511.
YAML accepts both octal and decimal values, JSON
requires decimal values for mode bits. If not
specified, the volume defaultMode will be used.
This might be in conflict with other options that
affect the file mode, like fsGroup, and the result
can be other mode bits set.'
format: int32
type: integer
path:
description: 'Required: Path is the relative path
name of the file to be created. Must not be absolute
or contain the ''..'' path. Must be utf-8 encoded.
The first item of the relative path must not start
with ''..'''
type: string
resourceFieldRef:
description: 'Selects a resource of the container:
only resources limits and requests (limits.cpu,
limits.memory, requests.cpu and requests.memory)
are currently supported.'
properties:
containerName:
description: 'Container name: required for volumes,
optional for env vars'
type: string
divisor:
anyOf:
- type: integer
- type: string
description: Specifies the output format of
the exposed resources, defaults to "1"
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
resource:
description: 'Required: resource to select'
type: string
required:
- resource
type: object
required:
- path
type: object
type: array
volumeLabel:
description: The volume label of the resulting disk inside
the VMI. Different bootstrapping mechanisms require
different values. Typical values are "cidata" (cloud-init),
"config-2" (cloud-init) or "OEMDRV" (kickstart).
type: string
type: object
downwardMetrics:
description: DownwardMetrics adds a very small disk to VMIs
which contains a limited view of host and guest metrics.
The disk content is compatible with vhostmd (https://github.com/vhostmd/vhostmd)
and vm-dump-metrics.
type: object
emptyDisk:
description: 'EmptyDisk represents a temporary disk which
shares the vmis lifecycle. More info: https://kubevirt.gitbooks.io/user-guide/disks-and-volumes.html'
properties:
capacity:
anyOf:
- type: integer
- type: string
description: Capacity of the sparse disk.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
required:
- capacity
type: object
ephemeral:
description: Ephemeral is a special volume source that "wraps"
specified source and provides copy-on-write image on top
of it.
properties:
persistentVolumeClaim:
description: 'PersistentVolumeClaimVolumeSource represents
a reference to a PersistentVolumeClaim in the same namespace.
Directly attached to the vmi via qemu. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
properties:
claimName:
description: 'claimName is the name of a PersistentVolumeClaim
in the same namespace as the pod using this volume.
More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
type: string
readOnly:
description: readOnly Will force the ReadOnly setting
in VolumeMounts. Default false.
type: boolean
required:
- claimName
type: object
type: object
hostDisk:
description: HostDisk represents a disk created on the cluster
level
properties:
capacity:
anyOf:
- type: integer
- type: string
description: Capacity of the sparse disk
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
path:
description: The path to HostDisk image located on the
cluster
type: string
shared:
description: Shared indicate whether the path is shared
between nodes
type: boolean
type:
description: Contains information if disk.img exists or
should be created allowed options are 'Disk' and 'DiskOrCreate'
type: string
required:
- path
- type
type: object
memoryDump:
description: MemoryDump is attached to the virt launcher and
is populated with a memory dump of the vmi
properties:
claimName:
description: 'claimName is the name of a PersistentVolumeClaim
in the same namespace as the pod using this volume.
More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
type: string
hotpluggable:
description: Hotpluggable indicates whether the volume
can be hotplugged and hotunplugged.
type: boolean
readOnly:
description: readOnly Will force the ReadOnly setting
in VolumeMounts. Default false.
type: boolean
required:
- claimName
type: object
name:
description: 'Volume''s name. Must be a DNS_LABEL and unique
within the vmi. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names'
type: string
persistentVolumeClaim:
description: 'PersistentVolumeClaimVolumeSource represents
a reference to a PersistentVolumeClaim in the same namespace.
Directly attached to the vmi via qemu. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
properties:
claimName:
description: 'claimName is the name of a PersistentVolumeClaim
in the same namespace as the pod using this volume.
More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
type: string
hotpluggable:
description: Hotpluggable indicates whether the volume
can be hotplugged and hotunplugged.
type: boolean
readOnly:
description: readOnly Will force the ReadOnly setting
in VolumeMounts. Default false.
type: boolean
required:
- claimName
type: object
secret:
description: 'SecretVolumeSource represents a reference to
a secret data in the same namespace. More info: https://kubernetes.io/docs/concepts/configuration/secret/'
properties:
optional:
description: Specify whether the Secret or it's keys must
be defined
type: boolean
secretName:
description: 'Name of the secret in the pod''s namespace
to use. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret'
type: string
volumeLabel:
description: The volume label of the resulting disk inside
the VMI. Different bootstrapping mechanisms require
different values. Typical values are "cidata" (cloud-init),
"config-2" (cloud-init) or "OEMDRV" (kickstart).
type: string
type: object
serviceAccount:
description: 'ServiceAccountVolumeSource represents a reference
to a service account. There can only be one volume of this
type! More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/'
properties:
serviceAccountName:
description: 'Name of the service account in the pod''s
namespace to use. More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/'
type: string
type: object
sysprep:
description: Represents a Sysprep volume source.
properties:
configMap:
description: ConfigMap references a ConfigMap that contains
Sysprep answer file named autounattend.xml that should
be attached as disk of CDROM type.
properties:
name:
description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind,
uid?'
type: string
type: object
secret:
description: Secret references a k8s Secret that contains
Sysprep answer file named autounattend.xml that should
be attached as disk of CDROM type.
properties:
name:
description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind,
uid?'
type: string
type: object
type: object
required:
- name
type: object
type: array
required:
- domain
type: object
type: object
required:
- template
type: object
status:
description: Status holds the current state of the controller and brief information
about its associated VirtualMachineInstance
properties:
conditions:
description: Hold the state information of the VirtualMachine and its VirtualMachineInstance
items:
description: VirtualMachineCondition represents the state of VirtualMachine
properties:
lastProbeTime:
format: date-time
nullable: true
type: string
lastTransitionTime:
format: date-time
nullable: true
type: string
message:
type: string
reason:
type: string
status:
type: string
type:
type: string
required:
- status
- type
type: object
type: array
created:
description: Created indicates if the virtual machine is created in the
cluster
type: boolean
desiredGeneration:
description: DesiredGeneration is the generation which is desired for the
VMI. This will be used in comparisons with ObservedGeneration to understand
when the VMI is out of sync. This will be changed at the same time as
ObservedGeneration to remove errors which could occur if Generation is
updated through an Update() before ObservedGeneration in Status.
format: int64
type: integer
memoryDumpRequest:
description: MemoryDumpRequest tracks memory dump request phase and info
of getting a memory dump to the given pvc
nullable: true
properties:
claimName:
description: ClaimName is the name of the pvc that will contain the
memory dump
type: string
endTimestamp:
description: EndTimestamp represents the time the memory dump was completed
format: date-time
type: string
fileName:
description: FileName represents the name of the output file
type: string
message:
description: Message is a detailed message about failure of the memory
dump
type: string
phase:
description: Phase represents the memory dump phase
type: string
remove:
description: Remove represents request of dissociating the memory dump
pvc
type: boolean
startTimestamp:
description: StartTimestamp represents the time the memory dump started
format: date-time
type: string
required:
- claimName
- phase
type: object
observedGeneration:
description: ObservedGeneration is the generation observed by the vmi when
started.
format: int64
type: integer
printableStatus:
default: Stopped
description: PrintableStatus is a human readable, high-level representation
of the status of the virtual machine
type: string
ready:
description: Ready indicates if the virtual machine is running and ready
type: boolean
restoreInProgress:
description: RestoreInProgress is the name of the VirtualMachineRestore
currently executing
type: string
snapshotInProgress:
description: SnapshotInProgress is the name of the VirtualMachineSnapshot
currently executing
type: string
startFailure:
description: StartFailure tracks consecutive VMI startup failures for the
purposes of crash loop backoffs
nullable: true
properties:
consecutiveFailCount:
type: integer
lastFailedVMIUID:
description: UID is a type that holds unique ID values, including UUIDs. Because
we don't ONLY use UUIDs, this is an alias to string. Being a type
captures intent and helps make sure that UIDs and names do not get
conflated.
type: string
retryAfterTimestamp:
format: date-time
type: string
type: object
stateChangeRequests:
description: StateChangeRequests indicates a list of actions that should
be taken on a VMI e.g. stop a specific VMI then start a new one.
items:
properties:
action:
description: Indicates the type of action that is requested. e.g.
Start or Stop
type: string
data:
additionalProperties:
type: string
description: Provides additional data in order to perform the Action
type: object
uid:
description: Indicates the UUID of an existing Virtual Machine Instance
that this change request applies to -- if applicable
type: string
required:
- action
type: object
type: array
volumeRequests:
description: VolumeRequests indicates a list of volumes add or remove from
the VMI template and hotplug on an active running VMI.
items:
properties:
addVolumeOptions:
description: AddVolumeOptions when set indicates a volume should be
added. The details within this field specify how to add the volume
properties:
disk:
description: Disk represents the hotplug disk that will be plugged
into the running VMI
properties:
blockSize:
description: If specified, the virtual disk will be presented
with the given block sizes.
properties:
custom:
description: CustomBlockSize represents the desired logical
and physical block size for a VM disk.
properties:
logical:
type: integer
physical:
type: integer
required:
- logical
- physical
type: object
matchVolume:
description: Represents if a feature is enabled or disabled.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults to
true.
type: boolean
type: object
type: object
bootOrder:
description: BootOrder is an integer value > 0, used to determine
ordering of boot devices. Lower values take precedence.
Each disk or interface that has a boot order must have a
unique value. Disks without a boot order are not tried if
a disk with a boot order exists.
type: integer
cache:
description: 'Cache specifies which kvm disk cache mode should
be used. Supported values are: CacheNone, CacheWriteThrough.'
type: string
cdrom:
description: Attach a volume as a cdrom to the vmi.
properties:
bus:
description: 'Bus indicates the type of disk device to
emulate. supported values: virtio, sata, scsi.'
type: string
readonly:
description: ReadOnly. Defaults to true.
type: boolean
tray:
description: Tray indicates if the tray of the device
is open or closed. Allowed values are "open" and "closed".
Defaults to closed.
type: string
type: object
dedicatedIOThread:
description: dedicatedIOThread indicates this disk should
have an exclusive IO Thread. Enabling this implies useIOThreads
= true. Defaults to false.
type: boolean
disk:
description: Attach a volume as a disk to the vmi.
properties:
bus:
description: 'Bus indicates the type of disk device to
emulate. supported values: virtio, sata, scsi, usb.'
type: string
pciAddress:
description: 'If specified, the virtual disk will be placed
on the guests pci address with the specified PCI address.
For example: 0000:81:01.10'
type: string
readonly:
description: ReadOnly. Defaults to false.
type: boolean
type: object
errorPolicy:
description: If specified, it can change the default error
policy (stop) for the disk
type: string
io:
description: 'IO specifies which QEMU disk IO mode should
be used. Supported values are: native, default, threads.'
type: string
lun:
description: Attach a volume as a LUN to the vmi.
properties:
bus:
description: 'Bus indicates the type of disk device to
emulate. supported values: virtio, sata, scsi.'
type: string
readonly:
description: ReadOnly. Defaults to false.
type: boolean
reservation:
description: Reservation indicates if the disk needs to
support the persistent reservation for the SCSI disk
type: boolean
type: object
name:
description: Name is the device name
type: string
serial:
description: Serial provides the ability to specify a serial
number for the disk device.
type: string
shareable:
description: If specified the disk is made sharable and multiple
write from different VMs are permitted
type: boolean
tag:
description: If specified, disk address and its tag will be
provided to the guest via config drive metadata
type: string
required:
- name
type: object
dryRun:
description: 'When present, indicates that modifications should
not be persisted. An invalid or unrecognized dryRun directive
will result in an error response and no further processing of
the request. Valid values are: - All: all dry run stages will
be processed'
items:
type: string
type: array
x-kubernetes-list-type: atomic
name:
description: Name represents the name that will be used to map
the disk to the corresponding volume. This overrides any name
set inside the Disk struct itself.
type: string
volumeSource:
description: VolumeSource represents the source of the volume
to map to the disk.
properties:
dataVolume:
description: DataVolume represents the dynamic creation a
PVC for this volume as well as the process of populating
that PVC with a disk image.
properties:
hotpluggable:
description: Hotpluggable indicates whether the volume
can be hotplugged and hotunplugged.
type: boolean
name:
description: Name of both the DataVolume and the PVC in
the same namespace. After PVC population the DataVolume
is garbage collected by default.
type: string
required:
- name
type: object
persistentVolumeClaim:
description: 'PersistentVolumeClaimVolumeSource represents
a reference to a PersistentVolumeClaim in the same namespace.
Directly attached to the vmi via qemu. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
properties:
claimName:
description: 'claimName is the name of a PersistentVolumeClaim
in the same namespace as the pod using this volume.
More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
type: string
hotpluggable:
description: Hotpluggable indicates whether the volume
can be hotplugged and hotunplugged.
type: boolean
readOnly:
description: readOnly Will force the ReadOnly setting
in VolumeMounts. Default false.
type: boolean
required:
- claimName
type: object
type: object
required:
- disk
- name
- volumeSource
type: object
removeVolumeOptions:
description: RemoveVolumeOptions when set indicates a volume should
be removed. The details within this field specify how to add the
volume
properties:
dryRun:
description: 'When present, indicates that modifications should
not be persisted. An invalid or unrecognized dryRun directive
will result in an error response and no further processing of
the request. Valid values are: - All: all dry run stages will
be processed'
items:
type: string
type: array
x-kubernetes-list-type: atomic
name:
description: Name represents the name that maps to both the disk
and volume that should be removed
type: string
required:
- name
type: object
type: object
type: array
x-kubernetes-list-type: atomic
volumeSnapshotStatuses:
description: VolumeSnapshotStatuses indicates a list of statuses whether
snapshotting is supported by each volume.
items:
properties:
enabled:
description: True if the volume supports snapshotting
type: boolean
name:
description: Volume name
type: string
reason:
description: Empty if snapshotting is enabled, contains reason otherwise
type: string
required:
- enabled
- name
type: object
type: array
type: object
required:
- spec
type: object
`,
"virtualmachineclone": `openAPIV3Schema:
description: VirtualMachineClone is a CRD that clones one VM into another.
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest internal
value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this object
represents. Servers may infer this from the endpoint the client submits requests
to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
properties:
annotationFilters:
description: 'Example use: "!some/key*". For a detailed description, please
refer to https://kubevirt.io/user-guide/operations/clone_api/#label-annotation-filters.'
items:
type: string
type: array
x-kubernetes-list-type: atomic
labelFilters:
description: 'Example use: "!some/key*". For a detailed description, please
refer to https://kubevirt.io/user-guide/operations/clone_api/#label-annotation-filters.'
items:
type: string
type: array
x-kubernetes-list-type: atomic
newMacAddresses:
additionalProperties:
type: string
description: NewMacAddresses manually sets that target interfaces' mac addresses.
The key is the interface name and the value is the new mac address. If
this field is not specified, a new MAC address will be generated automatically,
as for any interface that is not included in this map.
type: object
newSMBiosSerial:
description: NewSMBiosSerial manually sets that target's SMbios serial.
If this field is not specified, a new serial will be generated automatically.
type: string
source:
description: 'Source is the object that would be cloned. Currently supported
source types are: VirtualMachine of kubevirt.io API group, VirtualMachineSnapshot
of snapshot.kubevirt.io API group'
properties:
apiGroup:
description: APIGroup is the group for the resource being referenced.
If APIGroup is not specified, the specified Kind must be in the core
API group. For any other third-party types, APIGroup is required.
type: string
kind:
description: Kind is the type of resource being referenced
type: string
name:
description: Name is the name of resource being referenced
type: string
required:
- kind
- name
type: object
target:
description: 'Target is the outcome of the cloning process. Currently supported
source types are: - VirtualMachine of kubevirt.io API group - Empty (nil).
If the target is not provided, the target type would default to VirtualMachine
and a random name would be generated for the target. The target''s name
can be viewed by inspecting status "TargetName" field below.'
properties:
apiGroup:
description: APIGroup is the group for the resource being referenced.
If APIGroup is not specified, the specified Kind must be in the core
API group. For any other third-party types, APIGroup is required.
type: string
kind:
description: Kind is the type of resource being referenced
type: string
name:
description: Name is the name of resource being referenced
type: string
required:
- kind
- name
type: object
template:
description: For a detailed description, please refer to https://kubevirt.io/user-guide/operations/clone_api/#label-annotation-filters.
properties:
annotationFilters:
description: 'Example use: "!some/key*". For a detailed description,
please refer to https://kubevirt.io/user-guide/operations/clone_api/#label-annotation-filters.'
items:
type: string
type: array
x-kubernetes-list-type: atomic
labelFilters:
description: 'Example use: "!some/key*". For a detailed description,
please refer to https://kubevirt.io/user-guide/operations/clone_api/#label-annotation-filters.'
items:
type: string
type: array
x-kubernetes-list-type: atomic
type: object
required:
- source
type: object
status:
properties:
conditions:
items:
description: Condition defines conditions
properties:
lastProbeTime:
format: date-time
nullable: true
type: string
lastTransitionTime:
format: date-time
nullable: true
type: string
message:
type: string
reason:
type: string
status:
type: string
type:
description: ConditionType is the const type for Conditions
type: string
required:
- status
- type
type: object
type: array
x-kubernetes-list-type: atomic
creationTime:
format: date-time
nullable: true
type: string
phase:
type: string
restoreName:
nullable: true
type: string
snapshotName:
nullable: true
type: string
targetName:
nullable: true
type: string
type: object
required:
- spec
type: object
`,
"virtualmachineclusterinstancetype": `openAPIV3Schema:
description: VirtualMachineClusterInstancetype is a cluster scoped version of VirtualMachineInstancetype
resource.
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest internal
value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this object
represents. Servers may infer this from the endpoint the client submits requests
to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: Required spec describing the instancetype
properties:
annotations:
additionalProperties:
type: string
description: Optionally defines the required Annotations to be used by the
instance type and applied to the VirtualMachineInstance
type: object
cpu:
description: Required CPU related attributes of the instancetype.
properties:
dedicatedCPUPlacement:
description: DedicatedCPUPlacement requests the scheduler to place the
VirtualMachineInstance on a node with enough dedicated pCPUs and pin
the vCPUs to it.
type: boolean
guest:
description: "Required number of vCPUs to expose to the guest. \n The
resulting CPU topology being derived from the optional PreferredCPUTopology
attribute of CPUPreferences that itself defaults to PreferSockets."
format: int32
type: integer
isolateEmulatorThread:
description: IsolateEmulatorThread requests one more dedicated pCPU
to be allocated for the VMI to place the emulator thread on it.
type: boolean
model:
description: Model specifies the CPU model inside the VMI. List of available
models https://github.com/libvirt/libvirt/tree/master/src/cpu_map.
It is possible to specify special cases like "host-passthrough" to
get the same CPU as the node and "host-model" to get CPU closest to
the node one. Defaults to host-model.
type: string
numa:
description: NUMA allows specifying settings for the guest NUMA topology
properties:
guestMappingPassthrough:
description: GuestMappingPassthrough will create an efficient guest
topology based on host CPUs exclusively assigned to a pod. The
created topology ensures that memory and CPUs on the virtual numa
nodes never cross boundaries of host numa nodes.
type: object
type: object
realtime:
description: Realtime instructs the virt-launcher to tune the VMI for
lower latency, optional for real time workloads
properties:
mask:
description: 'Mask defines the vcpu mask expression that defines
which vcpus are used for realtime. Format matches libvirt''s expressions.
Example: "0-3,^1","0,2,3","2-3"'
type: string
type: object
required:
- guest
type: object
gpus:
description: Optionally defines any GPU devices associated with the instancetype.
items:
properties:
deviceName:
type: string
name:
description: Name of the GPU device as exposed by a device plugin
type: string
tag:
description: If specified, the virtual network interface address and
its tag will be provided to the guest via config drive
type: string
virtualGPUOptions:
properties:
display:
properties:
enabled:
description: Enabled determines if a display addapter backed
by a vGPU should be enabled or disabled on the guest. Defaults
to true.
type: boolean
ramFB:
description: Enables a boot framebuffer, until the guest OS
loads a real GPU driver Defaults to true.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
type: object
type: object
required:
- deviceName
- name
type: object
type: array
x-kubernetes-list-type: atomic
hostDevices:
description: Optionally defines any HostDevices associated with the instancetype.
items:
properties:
deviceName:
description: DeviceName is the resource name of the host device exposed
by a device plugin
type: string
name:
type: string
tag:
description: If specified, the virtual network interface address and
its tag will be provided to the guest via config drive
type: string
required:
- deviceName
- name
type: object
type: array
x-kubernetes-list-type: atomic
ioThreadsPolicy:
description: Optionally defines the IOThreadsPolicy to be used by the instancetype.
type: string
launchSecurity:
description: Optionally defines the LaunchSecurity to be used by the instancetype.
properties:
sev:
description: AMD Secure Encrypted Virtualization (SEV).
properties:
attestation:
description: If specified, run the attestation process for a vmi.
type: object
dhCert:
description: Base64 encoded guest owner's Diffie-Hellman key.
type: string
policy:
description: 'Guest policy flags as defined in AMD SEV API specification.
Note: due to security reasons it is not allowed to enable guest
debugging. Therefore NoDebug flag is not exposed to users and
is always true.'
properties:
encryptedState:
description: SEV-ES is required. Defaults to false.
type: boolean
type: object
session:
description: Base64 encoded session blob.
type: string
type: object
type: object
memory:
description: Required Memory related attributes of the instancetype.
properties:
guest:
anyOf:
- type: integer
- type: string
description: Required amount of memory which is visible inside the guest
OS.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
hugepages:
description: Optionally enables the use of hugepages for the VirtualMachineInstance
instead of regular memory.
properties:
pageSize:
description: PageSize specifies the hugepage size, for x86_64 architecture
valid values are 1Gi and 2Mi.
type: string
type: object
overcommitPercent:
description: OvercommitPercent is the percentage of the guest memory
which will be overcommitted. This means that the VMIs parent pod (virt-launcher)
will request less physical memory by a factor specified by the OvercommitPercent.
Overcommits can lead to memory exhaustion, which in turn can lead
to crashes. Use carefully. Defaults to 0
maximum: 100
minimum: 0
type: integer
required:
- guest
type: object
nodeSelector:
additionalProperties:
type: string
description: "NodeSelector is a selector which must be true for the vmi
to fit on a node. Selector which must match a node's labels for the vmi
to be scheduled on that node. More info: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/
\n NodeSelector is the name of the custom node selector for the instancetype."
type: object
schedulerName:
description: "If specified, the VMI will be dispatched by specified scheduler.
If not specified, the VMI will be dispatched by default scheduler. \n
SchedulerName is the name of the custom K8s scheduler for the instancetype."
type: string
required:
- cpu
- memory
type: object
required:
- spec
type: object
`,
"virtualmachineclusterpreference": `openAPIV3Schema:
description: VirtualMachineClusterPreference is a cluster scoped version of the
VirtualMachinePreference resource.
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest internal
value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this object
represents. Servers may infer this from the endpoint the client submits requests
to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: Required spec describing the preferences
properties:
annotations:
additionalProperties:
type: string
description: Optionally defines preferred Annotations to be applied to the
VirtualMachineInstance
type: object
clock:
description: Clock optionally defines preferences associated with the Clock
attribute of a VirtualMachineInstance DomainSpec
properties:
preferredClockOffset:
description: ClockOffset allows specifying the UTC offset or the timezone
of the guest clock.
properties:
timezone:
description: Timezone sets the guest clock to the specified timezone.
Zone name follows the TZ environment variable format (e.g. 'America/New_York').
type: string
utc:
description: UTC sets the guest clock to UTC on each boot. If an
offset is specified, guest changes to the clock will be kept during
reboots and are not reset.
properties:
offsetSeconds:
description: OffsetSeconds specifies an offset in seconds, relative
to UTC. If set, guest changes to the clock will be kept during
reboots and not reset.
type: integer
type: object
type: object
preferredTimer:
description: Timer specifies whih timers are attached to the vmi.
properties:
hpet:
description: HPET (High Precision Event Timer) - multiple timers
with periodic interrupts.
properties:
present:
description: Enabled set to false makes sure that the machine
type or a preset can't add the timer. Defaults to true.
type: boolean
tickPolicy:
description: TickPolicy determines what happens when QEMU misses
a deadline for injecting a tick to the guest. One of "delay",
"catchup", "merge", "discard".
type: string
type: object
hyperv:
description: Hyperv (Hypervclock) - lets guests read the host’s
wall clock time (paravirtualized). For windows guests.
properties:
present:
description: Enabled set to false makes sure that the machine
type or a preset can't add the timer. Defaults to true.
type: boolean
type: object
kvm:
description: "KVM \t(KVM clock) - lets guests read the host’s wall
clock time (paravirtualized). For linux guests."
properties:
present:
description: Enabled set to false makes sure that the machine
type or a preset can't add the timer. Defaults to true.
type: boolean
type: object
pit:
description: PIT (Programmable Interval Timer) - a timer with periodic
interrupts.
properties:
present:
description: Enabled set to false makes sure that the machine
type or a preset can't add the timer. Defaults to true.
type: boolean
tickPolicy:
description: TickPolicy determines what happens when QEMU misses
a deadline for injecting a tick to the guest. One of "delay",
"catchup", "discard".
type: string
type: object
rtc:
description: RTC (Real Time Clock) - a continuously running timer
with periodic interrupts.
properties:
present:
description: Enabled set to false makes sure that the machine
type or a preset can't add the timer. Defaults to true.
type: boolean
tickPolicy:
description: TickPolicy determines what happens when QEMU misses
a deadline for injecting a tick to the guest. One of "delay",
"catchup".
type: string
track:
description: Track the guest or the wall clock.
type: string
type: object
type: object
type: object
cpu:
description: CPU optionally defines preferences associated with the CPU
attribute of a VirtualMachineInstance DomainSpec
properties:
preferredCPUFeatures:
description: PreferredCPUFeatures optionally defines a slice of preferred
CPU features.
items:
description: CPUFeature allows specifying a CPU feature.
properties:
name:
description: Name of the CPU feature
type: string
policy:
description: 'Policy is the CPU feature attribute which can have
the following attributes: force - The virtual CPU will claim
the feature is supported regardless of it being supported by
host CPU. require - Guest creation will fail unless the feature
is supported by the host CPU or the hypervisor is able to emulate
it. optional - The feature will be supported by virtual CPU
if and only if it is supported by host CPU. disable - The feature
will not be supported by virtual CPU. forbid - Guest creation
will fail if the feature is supported by host CPU. Defaults
to require'
type: string
required:
- name
type: object
type: array
preferredCPUTopology:
description: PreferredCPUTopology optionally defines the preferred guest
visible CPU topology, defaults to PreferSockets.
type: string
type: object
devices:
description: Devices optionally defines preferences associated with the
Devices attribute of a VirtualMachineInstance DomainSpec
properties:
preferredAutoattachGraphicsDevice:
description: PreferredAutoattachGraphicsDevice optionally defines the
preferred value of AutoattachGraphicsDevice
type: boolean
preferredAutoattachInputDevice:
description: PreferredAutoattachInputDevice optionally defines the preferred
value of AutoattachInputDevice
type: boolean
preferredAutoattachMemBalloon:
description: PreferredAutoattachMemBalloon optionally defines the preferred
value of AutoattachMemBalloon
type: boolean
preferredAutoattachPodInterface:
description: PreferredAutoattachPodInterface optionally defines the
preferred value of AutoattachPodInterface
type: boolean
preferredAutoattachSerialConsole:
description: PreferredAutoattachSerialConsole optionally defines the
preferred value of AutoattachSerialConsole
type: boolean
preferredBlockMultiQueue:
description: PreferredBlockMultiQueue optionally enables the vhost multiqueue
feature for virtio disks.
type: boolean
preferredCdromBus:
description: PreferredCdromBus optionally defines the preferred bus
for Cdrom Disk devices.
type: string
preferredDisableHotplug:
description: PreferredDisableHotplug optionally defines the preferred
value of DisableHotplug
type: boolean
preferredDiskBlockSize:
description: PreferredBlockSize optionally defines the block size of
Disk devices.
properties:
custom:
description: CustomBlockSize represents the desired logical and
physical block size for a VM disk.
properties:
logical:
type: integer
physical:
type: integer
required:
- logical
- physical
type: object
matchVolume:
description: Represents if a feature is enabled or disabled.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
type: object
preferredDiskBus:
description: PreferredDiskBus optionally defines the preferred bus for
Disk Disk devices.
type: string
preferredDiskCache:
description: PreferredCache optionally defines the DriverCache to be
used by Disk devices.
type: string
preferredDiskDedicatedIoThread:
description: PreferredDedicatedIoThread optionally enables dedicated
IO threads for Disk devices.
type: boolean
preferredDiskIO:
description: PreferredIo optionally defines the QEMU disk IO mode to
be used by Disk devices.
type: string
preferredInputBus:
description: PreferredInputBus optionally defines the preferred bus
for Input devices.
type: string
preferredInputType:
description: PreferredInputType optionally defines the preferred type
for Input devices.
type: string
preferredInterfaceMasquerade:
description: PreferredInterfaceMasquerade optionally defines the preferred
masquerade configuration to use with each network interface.
type: object
preferredInterfaceModel:
description: PreferredInterfaceModel optionally defines the preferred
model to be used by Interface devices.
type: string
preferredLunBus:
description: PreferredLunBus optionally defines the preferred bus for
Lun Disk devices.
type: string
preferredNetworkInterfaceMultiQueue:
description: PreferredNetworkInterfaceMultiQueue optionally enables
the vhost multiqueue feature for virtio interfaces.
type: boolean
preferredRng:
description: PreferredRng optionally defines the preferred rng device
to be used.
type: object
preferredSoundModel:
description: PreferredSoundModel optionally defines the preferred model
for Sound devices.
type: string
preferredTPM:
description: PreferredTPM optionally defines the preferred TPM device
to be used.
properties:
persistent:
description: Persistent indicates the state of the TPM device should
be kept accross reboots Defaults to false
type: boolean
type: object
preferredUseVirtioTransitional:
description: PreferredUseVirtioTransitional optionally defines the preferred
value of UseVirtioTransitional
type: boolean
preferredVirtualGPUOptions:
description: PreferredVirtualGPUOptions optionally defines the preferred
value of VirtualGPUOptions
properties:
display:
properties:
enabled:
description: Enabled determines if a display addapter backed
by a vGPU should be enabled or disabled on the guest. Defaults
to true.
type: boolean
ramFB:
description: Enables a boot framebuffer, until the guest OS
loads a real GPU driver Defaults to true.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
type: object
type: object
type: object
features:
description: Features optionally defines preferences associated with the
Features attribute of a VirtualMachineInstance DomainSpec
properties:
preferredAcpi:
description: PreferredAcpi optionally enables the ACPI feature
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
preferredApic:
description: PreferredApic optionally enables and configures the APIC
feature
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
endOfInterrupt:
description: EndOfInterrupt enables the end of interrupt notification
in the guest. Defaults to false.
type: boolean
type: object
preferredHyperv:
description: PreferredHyperv optionally enables and configures HyperV
features
properties:
evmcs:
description: EVMCS Speeds up L2 vmexits, but disables other virtualization
features. Requires vapic. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
frequencies:
description: Frequencies improves the TSC clock source handling
for Hyper-V on KVM. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
ipi:
description: IPI improves performances in overcommited environments.
Requires vpindex. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
reenlightenment:
description: Reenlightenment enables the notifications on TSC frequency
changes. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
relaxed:
description: Relaxed instructs the guest OS to disable watchdog
timeouts. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
reset:
description: Reset enables Hyperv reboot/reset for the vmi. Requires
synic. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
runtime:
description: Runtime improves the time accounting to improve scheduling
in the guest. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
spinlocks:
description: Spinlocks allows to configure the spinlock retry attempts.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
spinlocks:
description: Retries indicates the number of retries. Must be
a value greater or equal 4096. Defaults to 4096.
format: int32
type: integer
type: object
synic:
description: SyNIC enables the Synthetic Interrupt Controller. Defaults
to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
synictimer:
description: SyNICTimer enables Synthetic Interrupt Controller Timers,
reducing CPU load. Defaults to the machine type setting.
properties:
direct:
description: Represents if a feature is enabled or disabled.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
enabled:
type: boolean
type: object
tlbflush:
description: TLBFlush improves performances in overcommited environments.
Requires vpindex. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
vapic:
description: VAPIC improves the paravirtualized handling of interrupts.
Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
vendorid:
description: VendorID allows setting the hypervisor vendor id. Defaults
to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
vendorid:
description: VendorID sets the hypervisor vendor id, visible
to the vmi. String up to twelve characters.
type: string
type: object
vpindex:
description: VPIndex enables the Virtual Processor Index to help
windows identifying virtual processors. Defaults to the machine
type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
type: object
preferredKvm:
description: PreferredKvm optionally enables and configures KVM features
properties:
hidden:
description: Hide the KVM hypervisor from standard MSR based discovery.
Defaults to false
type: boolean
type: object
preferredPvspinlock:
description: PreferredPvspinlock optionally enables the Pvspinlock feature
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
preferredSmm:
description: PreferredSmm optionally enables the SMM feature
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
type: object
firmware:
description: Firmware optionally defines preferences associated with the
Firmware attribute of a VirtualMachineInstance DomainSpec
properties:
preferredUseBios:
description: PreferredUseBios optionally enables BIOS
type: boolean
preferredUseBiosSerial:
description: "PreferredUseBiosSerial optionally transmitts BIOS output
over the serial. \n Requires PreferredUseBios to be enabled."
type: boolean
preferredUseEfi:
description: PreferredUseEfi optionally enables EFI
type: boolean
preferredUseSecureBoot:
description: "PreferredUseSecureBoot optionally enables SecureBoot and
the OVMF roms will be swapped for SecureBoot-enabled ones. \n Requires
PreferredUseEfi and PreferredSmm to be enabled."
type: boolean
type: object
machine:
description: Machine optionally defines preferences associated with the
Machine attribute of a VirtualMachineInstance DomainSpec
properties:
preferredMachineType:
description: PreferredMachineType optionally defines the preferred machine
type to use.
type: string
type: object
preferSpreadSocketToCoreRatio:
description: PreferSpreadSocketToCoreRatio defines the ratio to spread vCPUs
between cores and sockets, it defaults to 2.
format: int32
type: integer
preferredSubdomain:
description: Subdomain of the VirtualMachineInstance
type: string
preferredTerminationGracePeriodSeconds:
description: Grace period observed after signalling a VirtualMachineInstance
to stop after which the VirtualMachineInstance is force terminated.
format: int64
type: integer
requirements:
description: Requirements defines the minium amount of instance type defined
resources required by a set of preferences
properties:
cpu:
description: Required CPU related attributes of the instancetype.
properties:
guest:
description: Minimal number of vCPUs required by the preference.
format: int32
type: integer
required:
- guest
type: object
memory:
description: Required Memory related attributes of the instancetype.
properties:
guest:
anyOf:
- type: integer
- type: string
description: Minimal amount of memory required by the preference.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
required:
- guest
type: object
type: object
volumes:
description: Volumes optionally defines preferences associated with the
Volumes attribute of a VirtualMachineInstace DomainSpec
properties:
preferredStorageClassName:
description: PreffereedStorageClassName optionally defines the preferred
storageClass
type: string
type: object
type: object
required:
- spec
type: object
`,
"virtualmachineexport": `openAPIV3Schema:
description: VirtualMachineExport defines the operation of exporting a VM source
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest internal
value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this object
represents. Servers may infer this from the endpoint the client submits requests
to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: VirtualMachineExportSpec is the spec for a VirtualMachineExport
resource
properties:
source:
description: TypedLocalObjectReference contains enough information to let
you locate the typed referenced object inside the same namespace.
properties:
apiGroup:
description: APIGroup is the group for the resource being referenced.
If APIGroup is not specified, the specified Kind must be in the core
API group. For any other third-party types, APIGroup is required.
type: string
kind:
description: Kind is the type of resource being referenced
type: string
name:
description: Name is the name of resource being referenced
type: string
required:
- kind
- name
type: object
tokenSecretRef:
description: TokenSecretRef is the name of the custom-defined secret that
contains the token used by the export server pod
type: string
ttlDuration:
description: ttlDuration limits the lifetime of an export If this field
is set, after this duration has passed from counting from CreationTimestamp,
the export is eligible to be automatically deleted. If this field is omitted,
a reasonable default is applied.
type: string
required:
- source
type: object
status:
description: VirtualMachineExportStatus is the status for a VirtualMachineExport
resource
properties:
conditions:
items:
description: Condition defines conditions
properties:
lastProbeTime:
format: date-time
nullable: true
type: string
lastTransitionTime:
format: date-time
nullable: true
type: string
message:
type: string
reason:
type: string
status:
type: string
type:
description: ConditionType is the const type for Conditions
type: string
required:
- status
- type
type: object
type: array
x-kubernetes-list-type: atomic
links:
description: VirtualMachineExportLinks contains the links that point the
exported VM resources
properties:
external:
description: VirtualMachineExportLink contains a list of volumes available
for export, as well as the URLs to obtain these volumes
properties:
cert:
description: Cert is the public CA certificate base64 encoded
type: string
manifests:
description: Manifests is a list of available manifests for the
export
items:
description: VirtualMachineExportManifest contains the type and
URL of the exported manifest
properties:
type:
description: Type is the type of manifest returned
type: string
url:
description: Url is the url of the endpoint that returns the
manifest
type: string
required:
- type
- url
type: object
type: array
x-kubernetes-list-map-keys:
- type
x-kubernetes-list-type: map
volumes:
description: Volumes is a list of available volumes to export
items:
description: VirtualMachineExportVolume contains the name and
available formats for the exported volume
properties:
formats:
items:
description: VirtualMachineExportVolumeFormat contains the
format type and URL to get the volume in that format
properties:
format:
description: Format is the format of the image at the
specified URL
type: string
url:
description: Url is the url that contains the volume
in the format specified
type: string
required:
- format
- url
type: object
type: array
x-kubernetes-list-map-keys:
- format
x-kubernetes-list-type: map
name:
description: Name is the name of the exported volume
type: string
required:
- name
type: object
type: array
x-kubernetes-list-map-keys:
- name
x-kubernetes-list-type: map
required:
- cert
type: object
internal:
description: VirtualMachineExportLink contains a list of volumes available
for export, as well as the URLs to obtain these volumes
properties:
cert:
description: Cert is the public CA certificate base64 encoded
type: string
manifests:
description: Manifests is a list of available manifests for the
export
items:
description: VirtualMachineExportManifest contains the type and
URL of the exported manifest
properties:
type:
description: Type is the type of manifest returned
type: string
url:
description: Url is the url of the endpoint that returns the
manifest
type: string
required:
- type
- url
type: object
type: array
x-kubernetes-list-map-keys:
- type
x-kubernetes-list-type: map
volumes:
description: Volumes is a list of available volumes to export
items:
description: VirtualMachineExportVolume contains the name and
available formats for the exported volume
properties:
formats:
items:
description: VirtualMachineExportVolumeFormat contains the
format type and URL to get the volume in that format
properties:
format:
description: Format is the format of the image at the
specified URL
type: string
url:
description: Url is the url that contains the volume
in the format specified
type: string
required:
- format
- url
type: object
type: array
x-kubernetes-list-map-keys:
- format
x-kubernetes-list-type: map
name:
description: Name is the name of the exported volume
type: string
required:
- name
type: object
type: array
x-kubernetes-list-map-keys:
- name
x-kubernetes-list-type: map
required:
- cert
type: object
type: object
phase:
description: VirtualMachineExportPhase is the current phase of the VirtualMachineExport
type: string
serviceName:
description: ServiceName is the name of the service created associated with
the Virtual Machine export. It will be used to create the internal URLs
for downloading the images
type: string
tokenSecretRef:
description: TokenSecretRef is the name of the secret that contains the
token used by the export server pod
type: string
ttlExpirationTime:
description: The time at which the VM Export will be completely removed
according to specified TTL Formula is CreationTimestamp + TTL
format: date-time
type: string
virtualMachineName:
description: VirtualMachineName shows the name of the source virtual machine
if the source is either a VirtualMachine or a VirtualMachineSnapshot.
This is mainly to easily identify the source VirtualMachine in case of
a VirtualMachineSnapshot
type: string
type: object
required:
- spec
type: object
`,
"virtualmachineinstance": `openAPIV3Schema:
description: VirtualMachineInstance is *the* VirtualMachineInstance Definition.
It represents a virtual machine in the runtime environment of kubernetes.
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest internal
value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this object
represents. Servers may infer this from the endpoint the client submits requests
to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: VirtualMachineInstance Spec contains the VirtualMachineInstance
specification.
properties:
accessCredentials:
description: Specifies a set of public keys to inject into the vm guest
items:
description: AccessCredential represents a credential source that can
be used to authorize remote access to the vm guest Only one of its members
may be specified.
properties:
sshPublicKey:
description: SSHPublicKey represents the source and method of applying
a ssh public key into a guest virtual machine.
properties:
propagationMethod:
description: PropagationMethod represents how the public key is
injected into the vm guest.
properties:
configDrive:
description: ConfigDrivePropagation means that the ssh public
keys are injected into the VM using metadata using the configDrive
cloud-init provider
type: object
noCloud:
description: NoCloudPropagation means that the ssh public
keys are injected into the VM using metadata using the noCloud
cloud-init provider
type: object
qemuGuestAgent:
description: QemuGuestAgentAccessCredentailPropagation means
ssh public keys are dynamically injected into the vm at
runtime via the qemu guest agent. This feature requires
the qemu guest agent to be running within the guest.
properties:
users:
description: Users represents a list of guest users that
should have the ssh public keys added to their authorized_keys
file.
items:
type: string
type: array
x-kubernetes-list-type: set
required:
- users
type: object
type: object
source:
description: Source represents where the public keys are pulled
from
properties:
secret:
description: Secret means that the access credential is pulled
from a kubernetes secret
properties:
secretName:
description: SecretName represents the name of the secret
in the VMI's namespace
type: string
required:
- secretName
type: object
type: object
required:
- propagationMethod
- source
type: object
userPassword:
description: UserPassword represents the source and method for applying
a guest user's password
properties:
propagationMethod:
description: propagationMethod represents how the user passwords
are injected into the vm guest.
properties:
qemuGuestAgent:
description: QemuGuestAgentAccessCredentailPropagation means
passwords are dynamically injected into the vm at runtime
via the qemu guest agent. This feature requires the qemu
guest agent to be running within the guest.
type: object
type: object
source:
description: Source represents where the user passwords are pulled
from
properties:
secret:
description: Secret means that the access credential is pulled
from a kubernetes secret
properties:
secretName:
description: SecretName represents the name of the secret
in the VMI's namespace
type: string
required:
- secretName
type: object
type: object
required:
- propagationMethod
- source
type: object
type: object
type: array
x-kubernetes-list-type: atomic
affinity:
description: If affinity is specifies, obey all the affinity rules
properties:
nodeAffinity:
description: Describes node affinity scheduling rules for the pod.
properties:
preferredDuringSchedulingIgnoredDuringExecution:
description: The scheduler will prefer to schedule pods to nodes
that satisfy the affinity expressions specified by this field,
but it may choose a node that violates one or more of the expressions.
The node that is most preferred is the one with the greatest sum
of weights, i.e. for each node that meets all of the scheduling
requirements (resource request, requiredDuringScheduling affinity
expressions, etc.), compute a sum by iterating through the elements
of this field and adding "weight" to the sum if the node matches
the corresponding matchExpressions; the node(s) with the highest
sum are the most preferred.
items:
description: An empty preferred scheduling term matches all objects
with implicit weight 0 (i.e. it's a no-op). A null preferred
scheduling term matches no objects (i.e. is also a no-op).
properties:
preference:
description: A node selector term, associated with the corresponding
weight.
properties:
matchExpressions:
description: A list of node selector requirements by node's
labels.
items:
description: A node selector requirement is a selector
that contains values, a key, and an operator that
relates the key and values.
properties:
key:
description: The label key that the selector applies
to.
type: string
operator:
description: Represents a key's relationship to
a set of values. Valid operators are In, NotIn,
Exists, DoesNotExist. Gt, and Lt.
type: string
values:
description: An array of string values. If the operator
is In or NotIn, the values array must be non-empty.
If the operator is Exists or DoesNotExist, the
values array must be empty. If the operator is
Gt or Lt, the values array must have a single
element, which will be interpreted as an integer.
This array is replaced during a strategic merge
patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchFields:
description: A list of node selector requirements by node's
fields.
items:
description: A node selector requirement is a selector
that contains values, a key, and an operator that
relates the key and values.
properties:
key:
description: The label key that the selector applies
to.
type: string
operator:
description: Represents a key's relationship to
a set of values. Valid operators are In, NotIn,
Exists, DoesNotExist. Gt, and Lt.
type: string
values:
description: An array of string values. If the operator
is In or NotIn, the values array must be non-empty.
If the operator is Exists or DoesNotExist, the
values array must be empty. If the operator is
Gt or Lt, the values array must have a single
element, which will be interpreted as an integer.
This array is replaced during a strategic merge
patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
type: object
weight:
description: Weight associated with matching the corresponding
nodeSelectorTerm, in the range 1-100.
format: int32
type: integer
required:
- preference
- weight
type: object
type: array
requiredDuringSchedulingIgnoredDuringExecution:
description: If the affinity requirements specified by this field
are not met at scheduling time, the pod will not be scheduled
onto the node. If the affinity requirements specified by this
field cease to be met at some point during pod execution (e.g.
due to an update), the system may or may not try to eventually
evict the pod from its node.
properties:
nodeSelectorTerms:
description: Required. A list of node selector terms. The terms
are ORed.
items:
description: A null or empty node selector term matches no
objects. The requirements of them are ANDed. The TopologySelectorTerm
type implements a subset of the NodeSelectorTerm.
properties:
matchExpressions:
description: A list of node selector requirements by node's
labels.
items:
description: A node selector requirement is a selector
that contains values, a key, and an operator that
relates the key and values.
properties:
key:
description: The label key that the selector applies
to.
type: string
operator:
description: Represents a key's relationship to
a set of values. Valid operators are In, NotIn,
Exists, DoesNotExist. Gt, and Lt.
type: string
values:
description: An array of string values. If the operator
is In or NotIn, the values array must be non-empty.
If the operator is Exists or DoesNotExist, the
values array must be empty. If the operator is
Gt or Lt, the values array must have a single
element, which will be interpreted as an integer.
This array is replaced during a strategic merge
patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchFields:
description: A list of node selector requirements by node's
fields.
items:
description: A node selector requirement is a selector
that contains values, a key, and an operator that
relates the key and values.
properties:
key:
description: The label key that the selector applies
to.
type: string
operator:
description: Represents a key's relationship to
a set of values. Valid operators are In, NotIn,
Exists, DoesNotExist. Gt, and Lt.
type: string
values:
description: An array of string values. If the operator
is In or NotIn, the values array must be non-empty.
If the operator is Exists or DoesNotExist, the
values array must be empty. If the operator is
Gt or Lt, the values array must have a single
element, which will be interpreted as an integer.
This array is replaced during a strategic merge
patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
type: object
type: array
required:
- nodeSelectorTerms
type: object
type: object
podAffinity:
description: Describes pod affinity scheduling rules (e.g. co-locate
this pod in the same node, zone, etc. as some other pod(s)).
properties:
preferredDuringSchedulingIgnoredDuringExecution:
description: The scheduler will prefer to schedule pods to nodes
that satisfy the affinity expressions specified by this field,
but it may choose a node that violates one or more of the expressions.
The node that is most preferred is the one with the greatest sum
of weights, i.e. for each node that meets all of the scheduling
requirements (resource request, requiredDuringScheduling affinity
expressions, etc.), compute a sum by iterating through the elements
of this field and adding "weight" to the sum if the node has pods
which matches the corresponding podAffinityTerm; the node(s) with
the highest sum are the most preferred.
items:
description: The weights of all of the matched WeightedPodAffinityTerm
fields are added per-node to find the most preferred node(s)
properties:
podAffinityTerm:
description: Required. A pod affinity term, associated with
the corresponding weight.
properties:
labelSelector:
description: A label query over a set of resources, in
this case pods.
properties:
matchExpressions:
description: matchExpressions is a list of label selector
requirements. The requirements are ANDed.
items:
description: A label selector requirement is a selector
that contains values, a key, and an operator that
relates the key and values.
properties:
key:
description: key is the label key that the selector
applies to.
type: string
operator:
description: operator represents a key's relationship
to a set of values. Valid operators are In,
NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string values.
If the operator is In or NotIn, the values
array must be non-empty. If the operator is
Exists or DoesNotExist, the values array must
be empty. This array is replaced during a
strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value} pairs.
A single {key,value} in the matchLabels map is equivalent
to an element of matchExpressions, whose key field
is "key", the operator is "In", and the values array
contains only "value". The requirements are ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set of namespaces
that the term applies to. The term is applied to the
union of the namespaces selected by this field and the
ones listed in the namespaces field. null selector and
null or empty namespaces list means "this pod's namespace".
An empty selector ({}) matches all namespaces.
properties:
matchExpressions:
description: matchExpressions is a list of label selector
requirements. The requirements are ANDed.
items:
description: A label selector requirement is a selector
that contains values, a key, and an operator that
relates the key and values.
properties:
key:
description: key is the label key that the selector
applies to.
type: string
operator:
description: operator represents a key's relationship
to a set of values. Valid operators are In,
NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string values.
If the operator is In or NotIn, the values
array must be non-empty. If the operator is
Exists or DoesNotExist, the values array must
be empty. This array is replaced during a
strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value} pairs.
A single {key,value} in the matchLabels map is equivalent
to an element of matchExpressions, whose key field
is "key", the operator is "In", and the values array
contains only "value". The requirements are ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static list of namespace
names that the term applies to. The term is applied
to the union of the namespaces listed in this field
and the ones selected by namespaceSelector. null or
empty namespaces list and null namespaceSelector means
"this pod's namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located (affinity)
or not co-located (anti-affinity) with the pods matching
the labelSelector in the specified namespaces, where
co-located is defined as running on a node whose value
of the label with key topologyKey matches that of any
node on which any of the selected pods is running. Empty
topologyKey is not allowed.
type: string
required:
- topologyKey
type: object
weight:
description: weight associated with matching the corresponding
podAffinityTerm, in the range 1-100.
format: int32
type: integer
required:
- podAffinityTerm
- weight
type: object
type: array
requiredDuringSchedulingIgnoredDuringExecution:
description: If the affinity requirements specified by this field
are not met at scheduling time, the pod will not be scheduled
onto the node. If the affinity requirements specified by this
field cease to be met at some point during pod execution (e.g.
due to a pod label update), the system may or may not try to eventually
evict the pod from its node. When there are multiple elements,
the lists of nodes corresponding to each podAffinityTerm are intersected,
i.e. all terms must be satisfied.
items:
description: Defines a set of pods (namely those matching the
labelSelector relative to the given namespace(s)) that this
pod should be co-located (affinity) or not co-located (anti-affinity)
with, where co-located is defined as running on a node whose
value of the label with key <topologyKey> matches that of any
node on which a pod of the set of pods is running
properties:
labelSelector:
description: A label query over a set of resources, in this
case pods.
properties:
matchExpressions:
description: matchExpressions is a list of label selector
requirements. The requirements are ANDed.
items:
description: A label selector requirement is a selector
that contains values, a key, and an operator that
relates the key and values.
properties:
key:
description: key is the label key that the selector
applies to.
type: string
operator:
description: operator represents a key's relationship
to a set of values. Valid operators are In, NotIn,
Exists and DoesNotExist.
type: string
values:
description: values is an array of string values.
If the operator is In or NotIn, the values array
must be non-empty. If the operator is Exists or
DoesNotExist, the values array must be empty.
This array is replaced during a strategic merge
patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value} pairs.
A single {key,value} in the matchLabels map is equivalent
to an element of matchExpressions, whose key field is
"key", the operator is "In", and the values array contains
only "value". The requirements are ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set of namespaces that
the term applies to. The term is applied to the union of
the namespaces selected by this field and the ones listed
in the namespaces field. null selector and null or empty
namespaces list means "this pod's namespace". An empty selector
({}) matches all namespaces.
properties:
matchExpressions:
description: matchExpressions is a list of label selector
requirements. The requirements are ANDed.
items:
description: A label selector requirement is a selector
that contains values, a key, and an operator that
relates the key and values.
properties:
key:
description: key is the label key that the selector
applies to.
type: string
operator:
description: operator represents a key's relationship
to a set of values. Valid operators are In, NotIn,
Exists and DoesNotExist.
type: string
values:
description: values is an array of string values.
If the operator is In or NotIn, the values array
must be non-empty. If the operator is Exists or
DoesNotExist, the values array must be empty.
This array is replaced during a strategic merge
patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value} pairs.
A single {key,value} in the matchLabels map is equivalent
to an element of matchExpressions, whose key field is
"key", the operator is "In", and the values array contains
only "value". The requirements are ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static list of namespace
names that the term applies to. The term is applied to the
union of the namespaces listed in this field and the ones
selected by namespaceSelector. null or empty namespaces
list and null namespaceSelector means "this pod's namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located (affinity) or not
co-located (anti-affinity) with the pods matching the labelSelector
in the specified namespaces, where co-located is defined
as running on a node whose value of the label with key topologyKey
matches that of any node on which any of the selected pods
is running. Empty topologyKey is not allowed.
type: string
required:
- topologyKey
type: object
type: array
type: object
podAntiAffinity:
description: Describes pod anti-affinity scheduling rules (e.g. avoid
putting this pod in the same node, zone, etc. as some other pod(s)).
properties:
preferredDuringSchedulingIgnoredDuringExecution:
description: The scheduler will prefer to schedule pods to nodes
that satisfy the anti-affinity expressions specified by this field,
but it may choose a node that violates one or more of the expressions.
The node that is most preferred is the one with the greatest sum
of weights, i.e. for each node that meets all of the scheduling
requirements (resource request, requiredDuringScheduling anti-affinity
expressions, etc.), compute a sum by iterating through the elements
of this field and adding "weight" to the sum if the node has pods
which matches the corresponding podAffinityTerm; the node(s) with
the highest sum are the most preferred.
items:
description: The weights of all of the matched WeightedPodAffinityTerm
fields are added per-node to find the most preferred node(s)
properties:
podAffinityTerm:
description: Required. A pod affinity term, associated with
the corresponding weight.
properties:
labelSelector:
description: A label query over a set of resources, in
this case pods.
properties:
matchExpressions:
description: matchExpressions is a list of label selector
requirements. The requirements are ANDed.
items:
description: A label selector requirement is a selector
that contains values, a key, and an operator that
relates the key and values.
properties:
key:
description: key is the label key that the selector
applies to.
type: string
operator:
description: operator represents a key's relationship
to a set of values. Valid operators are In,
NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string values.
If the operator is In or NotIn, the values
array must be non-empty. If the operator is
Exists or DoesNotExist, the values array must
be empty. This array is replaced during a
strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value} pairs.
A single {key,value} in the matchLabels map is equivalent
to an element of matchExpressions, whose key field
is "key", the operator is "In", and the values array
contains only "value". The requirements are ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set of namespaces
that the term applies to. The term is applied to the
union of the namespaces selected by this field and the
ones listed in the namespaces field. null selector and
null or empty namespaces list means "this pod's namespace".
An empty selector ({}) matches all namespaces.
properties:
matchExpressions:
description: matchExpressions is a list of label selector
requirements. The requirements are ANDed.
items:
description: A label selector requirement is a selector
that contains values, a key, and an operator that
relates the key and values.
properties:
key:
description: key is the label key that the selector
applies to.
type: string
operator:
description: operator represents a key's relationship
to a set of values. Valid operators are In,
NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string values.
If the operator is In or NotIn, the values
array must be non-empty. If the operator is
Exists or DoesNotExist, the values array must
be empty. This array is replaced during a
strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value} pairs.
A single {key,value} in the matchLabels map is equivalent
to an element of matchExpressions, whose key field
is "key", the operator is "In", and the values array
contains only "value". The requirements are ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static list of namespace
names that the term applies to. The term is applied
to the union of the namespaces listed in this field
and the ones selected by namespaceSelector. null or
empty namespaces list and null namespaceSelector means
"this pod's namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located (affinity)
or not co-located (anti-affinity) with the pods matching
the labelSelector in the specified namespaces, where
co-located is defined as running on a node whose value
of the label with key topologyKey matches that of any
node on which any of the selected pods is running. Empty
topologyKey is not allowed.
type: string
required:
- topologyKey
type: object
weight:
description: weight associated with matching the corresponding
podAffinityTerm, in the range 1-100.
format: int32
type: integer
required:
- podAffinityTerm
- weight
type: object
type: array
requiredDuringSchedulingIgnoredDuringExecution:
description: If the anti-affinity requirements specified by this
field are not met at scheduling time, the pod will not be scheduled
onto the node. If the anti-affinity requirements specified by
this field cease to be met at some point during pod execution
(e.g. due to a pod label update), the system may or may not try
to eventually evict the pod from its node. When there are multiple
elements, the lists of nodes corresponding to each podAffinityTerm
are intersected, i.e. all terms must be satisfied.
items:
description: Defines a set of pods (namely those matching the
labelSelector relative to the given namespace(s)) that this
pod should be co-located (affinity) or not co-located (anti-affinity)
with, where co-located is defined as running on a node whose
value of the label with key <topologyKey> matches that of any
node on which a pod of the set of pods is running
properties:
labelSelector:
description: A label query over a set of resources, in this
case pods.
properties:
matchExpressions:
description: matchExpressions is a list of label selector
requirements. The requirements are ANDed.
items:
description: A label selector requirement is a selector
that contains values, a key, and an operator that
relates the key and values.
properties:
key:
description: key is the label key that the selector
applies to.
type: string
operator:
description: operator represents a key's relationship
to a set of values. Valid operators are In, NotIn,
Exists and DoesNotExist.
type: string
values:
description: values is an array of string values.
If the operator is In or NotIn, the values array
must be non-empty. If the operator is Exists or
DoesNotExist, the values array must be empty.
This array is replaced during a strategic merge
patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value} pairs.
A single {key,value} in the matchLabels map is equivalent
to an element of matchExpressions, whose key field is
"key", the operator is "In", and the values array contains
only "value". The requirements are ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set of namespaces that
the term applies to. The term is applied to the union of
the namespaces selected by this field and the ones listed
in the namespaces field. null selector and null or empty
namespaces list means "this pod's namespace". An empty selector
({}) matches all namespaces.
properties:
matchExpressions:
description: matchExpressions is a list of label selector
requirements. The requirements are ANDed.
items:
description: A label selector requirement is a selector
that contains values, a key, and an operator that
relates the key and values.
properties:
key:
description: key is the label key that the selector
applies to.
type: string
operator:
description: operator represents a key's relationship
to a set of values. Valid operators are In, NotIn,
Exists and DoesNotExist.
type: string
values:
description: values is an array of string values.
If the operator is In or NotIn, the values array
must be non-empty. If the operator is Exists or
DoesNotExist, the values array must be empty.
This array is replaced during a strategic merge
patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value} pairs.
A single {key,value} in the matchLabels map is equivalent
to an element of matchExpressions, whose key field is
"key", the operator is "In", and the values array contains
only "value". The requirements are ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static list of namespace
names that the term applies to. The term is applied to the
union of the namespaces listed in this field and the ones
selected by namespaceSelector. null or empty namespaces
list and null namespaceSelector means "this pod's namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located (affinity) or not
co-located (anti-affinity) with the pods matching the labelSelector
in the specified namespaces, where co-located is defined
as running on a node whose value of the label with key topologyKey
matches that of any node on which any of the selected pods
is running. Empty topologyKey is not allowed.
type: string
required:
- topologyKey
type: object
type: array
type: object
type: object
architecture:
description: Specifies the architecture of the vm guest you are attempting
to run. Defaults to the compiled architecture of the KubeVirt components
type: string
dnsConfig:
description: Specifies the DNS parameters of a pod. Parameters specified
here will be merged to the generated DNS configuration based on DNSPolicy.
properties:
nameservers:
description: A list of DNS name server IP addresses. This will be appended
to the base nameservers generated from DNSPolicy. Duplicated nameservers
will be removed.
items:
type: string
type: array
options:
description: A list of DNS resolver options. This will be merged with
the base options generated from DNSPolicy. Duplicated entries will
be removed. Resolution options given in Options will override those
that appear in the base DNSPolicy.
items:
description: PodDNSConfigOption defines DNS resolver options of a
pod.
properties:
name:
description: Required.
type: string
value:
type: string
type: object
type: array
searches:
description: A list of DNS search domains for host-name lookup. This
will be appended to the base search paths generated from DNSPolicy.
Duplicated search paths will be removed.
items:
type: string
type: array
type: object
dnsPolicy:
description: Set DNS policy for the pod. Defaults to "ClusterFirst". Valid
values are 'ClusterFirstWithHostNet', 'ClusterFirst', 'Default' or 'None'.
DNS parameters given in DNSConfig will be merged with the policy selected
with DNSPolicy. To have DNS options set along with hostNetwork, you have
to specify DNS policy explicitly to 'ClusterFirstWithHostNet'.
type: string
domain:
description: Specification of the desired behavior of the VirtualMachineInstance
on the host.
properties:
chassis:
description: Chassis specifies the chassis info passed to the domain.
properties:
asset:
type: string
manufacturer:
type: string
serial:
type: string
sku:
type: string
version:
type: string
type: object
clock:
description: Clock sets the clock and timers of the vmi.
properties:
timer:
description: Timer specifies whih timers are attached to the vmi.
properties:
hpet:
description: HPET (High Precision Event Timer) - multiple timers
with periodic interrupts.
properties:
present:
description: Enabled set to false makes sure that the machine
type or a preset can't add the timer. Defaults to true.
type: boolean
tickPolicy:
description: TickPolicy determines what happens when QEMU
misses a deadline for injecting a tick to the guest. One
of "delay", "catchup", "merge", "discard".
type: string
type: object
hyperv:
description: Hyperv (Hypervclock) - lets guests read the host’s
wall clock time (paravirtualized). For windows guests.
properties:
present:
description: Enabled set to false makes sure that the machine
type or a preset can't add the timer. Defaults to true.
type: boolean
type: object
kvm:
description: "KVM \t(KVM clock) - lets guests read the host’s
wall clock time (paravirtualized). For linux guests."
properties:
present:
description: Enabled set to false makes sure that the machine
type or a preset can't add the timer. Defaults to true.
type: boolean
type: object
pit:
description: PIT (Programmable Interval Timer) - a timer with
periodic interrupts.
properties:
present:
description: Enabled set to false makes sure that the machine
type or a preset can't add the timer. Defaults to true.
type: boolean
tickPolicy:
description: TickPolicy determines what happens when QEMU
misses a deadline for injecting a tick to the guest. One
of "delay", "catchup", "discard".
type: string
type: object
rtc:
description: RTC (Real Time Clock) - a continuously running
timer with periodic interrupts.
properties:
present:
description: Enabled set to false makes sure that the machine
type or a preset can't add the timer. Defaults to true.
type: boolean
tickPolicy:
description: TickPolicy determines what happens when QEMU
misses a deadline for injecting a tick to the guest. One
of "delay", "catchup".
type: string
track:
description: Track the guest or the wall clock.
type: string
type: object
type: object
timezone:
description: Timezone sets the guest clock to the specified timezone.
Zone name follows the TZ environment variable format (e.g. 'America/New_York').
type: string
utc:
description: UTC sets the guest clock to UTC on each boot. If an
offset is specified, guest changes to the clock will be kept during
reboots and are not reset.
properties:
offsetSeconds:
description: OffsetSeconds specifies an offset in seconds, relative
to UTC. If set, guest changes to the clock will be kept during
reboots and not reset.
type: integer
type: object
type: object
cpu:
description: CPU allow specified the detailed CPU topology inside the
vmi.
properties:
cores:
description: Cores specifies the number of cores inside the vmi.
Must be a value greater or equal 1.
format: int32
type: integer
dedicatedCpuPlacement:
description: DedicatedCPUPlacement requests the scheduler to place
the VirtualMachineInstance on a node with enough dedicated pCPUs
and pin the vCPUs to it.
type: boolean
features:
description: Features specifies the CPU features list inside the
VMI.
items:
description: CPUFeature allows specifying a CPU feature.
properties:
name:
description: Name of the CPU feature
type: string
policy:
description: 'Policy is the CPU feature attribute which can
have the following attributes: force - The virtual CPU
will claim the feature is supported regardless of it being
supported by host CPU. require - Guest creation will fail
unless the feature is supported by the host CPU or the hypervisor
is able to emulate it. optional - The feature will be supported
by virtual CPU if and only if it is supported by host CPU.
disable - The feature will not be supported by virtual
CPU. forbid - Guest creation will fail if the feature
is supported by host CPU. Defaults to require'
type: string
required:
- name
type: object
type: array
isolateEmulatorThread:
description: IsolateEmulatorThread requests one more dedicated pCPU
to be allocated for the VMI to place the emulator thread on it.
type: boolean
maxSockets:
description: MaxSockets specifies the maximum amount of sockets
that can be hotplugged
format: int32
type: integer
model:
description: Model specifies the CPU model inside the VMI. List
of available models https://github.com/libvirt/libvirt/tree/master/src/cpu_map.
It is possible to specify special cases like "host-passthrough"
to get the same CPU as the node and "host-model" to get CPU closest
to the node one. Defaults to host-model.
type: string
numa:
description: NUMA allows specifying settings for the guest NUMA
topology
properties:
guestMappingPassthrough:
description: GuestMappingPassthrough will create an efficient
guest topology based on host CPUs exclusively assigned to
a pod. The created topology ensures that memory and CPUs on
the virtual numa nodes never cross boundaries of host numa
nodes.
type: object
type: object
realtime:
description: Realtime instructs the virt-launcher to tune the VMI
for lower latency, optional for real time workloads
properties:
mask:
description: 'Mask defines the vcpu mask expression that defines
which vcpus are used for realtime. Format matches libvirt''s
expressions. Example: "0-3,^1","0,2,3","2-3"'
type: string
type: object
sockets:
description: Sockets specifies the number of sockets inside the
vmi. Must be a value greater or equal 1.
format: int32
type: integer
threads:
description: Threads specifies the number of threads inside the
vmi. Must be a value greater or equal 1.
format: int32
type: integer
type: object
devices:
description: Devices allows adding disks, network interfaces, and others
properties:
autoattachGraphicsDevice:
description: Whether to attach the default graphics device or not.
VNC will not be available if set to false. Defaults to true.
type: boolean
autoattachInputDevice:
description: Whether to attach an Input Device. Defaults to false.
type: boolean
autoattachMemBalloon:
description: Whether to attach the Memory balloon device with default
period. Period can be adjusted in virt-config. Defaults to true.
type: boolean
autoattachPodInterface:
description: Whether to attach a pod network interface. Defaults
to true.
type: boolean
autoattachSerialConsole:
description: Whether to attach the default virtio-serial console
or not. Serial console access will not be available if set to
false. Defaults to true.
type: boolean
autoattachVSOCK:
description: Whether to attach the VSOCK CID to the VM or not. VSOCK
access will be available if set to true. Defaults to false.
type: boolean
blockMultiQueue:
description: Whether or not to enable virtio multi-queue for block
devices. Defaults to false.
type: boolean
clientPassthrough:
description: To configure and access client devices such as redirecting
USB
type: object
disableHotplug:
description: DisableHotplug disabled the ability to hotplug disks.
type: boolean
disks:
description: Disks describes disks, cdroms and luns which are connected
to the vmi.
items:
properties:
blockSize:
description: If specified, the virtual disk will be presented
with the given block sizes.
properties:
custom:
description: CustomBlockSize represents the desired logical
and physical block size for a VM disk.
properties:
logical:
type: integer
physical:
type: integer
required:
- logical
- physical
type: object
matchVolume:
description: Represents if a feature is enabled or disabled.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults to
true.
type: boolean
type: object
type: object
bootOrder:
description: BootOrder is an integer value > 0, used to determine
ordering of boot devices. Lower values take precedence.
Each disk or interface that has a boot order must have a
unique value. Disks without a boot order are not tried if
a disk with a boot order exists.
type: integer
cache:
description: 'Cache specifies which kvm disk cache mode should
be used. Supported values are: CacheNone, CacheWriteThrough.'
type: string
cdrom:
description: Attach a volume as a cdrom to the vmi.
properties:
bus:
description: 'Bus indicates the type of disk device to
emulate. supported values: virtio, sata, scsi.'
type: string
readonly:
description: ReadOnly. Defaults to true.
type: boolean
tray:
description: Tray indicates if the tray of the device
is open or closed. Allowed values are "open" and "closed".
Defaults to closed.
type: string
type: object
dedicatedIOThread:
description: dedicatedIOThread indicates this disk should
have an exclusive IO Thread. Enabling this implies useIOThreads
= true. Defaults to false.
type: boolean
disk:
description: Attach a volume as a disk to the vmi.
properties:
bus:
description: 'Bus indicates the type of disk device to
emulate. supported values: virtio, sata, scsi, usb.'
type: string
pciAddress:
description: 'If specified, the virtual disk will be placed
on the guests pci address with the specified PCI address.
For example: 0000:81:01.10'
type: string
readonly:
description: ReadOnly. Defaults to false.
type: boolean
type: object
errorPolicy:
description: If specified, it can change the default error
policy (stop) for the disk
type: string
io:
description: 'IO specifies which QEMU disk IO mode should
be used. Supported values are: native, default, threads.'
type: string
lun:
description: Attach a volume as a LUN to the vmi.
properties:
bus:
description: 'Bus indicates the type of disk device to
emulate. supported values: virtio, sata, scsi.'
type: string
readonly:
description: ReadOnly. Defaults to false.
type: boolean
reservation:
description: Reservation indicates if the disk needs to
support the persistent reservation for the SCSI disk
type: boolean
type: object
name:
description: Name is the device name
type: string
serial:
description: Serial provides the ability to specify a serial
number for the disk device.
type: string
shareable:
description: If specified the disk is made sharable and multiple
write from different VMs are permitted
type: boolean
tag:
description: If specified, disk address and its tag will be
provided to the guest via config drive metadata
type: string
required:
- name
type: object
type: array
downwardMetrics:
description: DownwardMetrics creates a virtio serials for exposing
the downward metrics to the vmi.
type: object
filesystems:
description: Filesystems describes filesystem which is connected
to the vmi.
items:
properties:
name:
description: Name is the device name
type: string
virtiofs:
description: Virtiofs is supported
type: object
required:
- name
- virtiofs
type: object
type: array
x-kubernetes-list-type: atomic
gpus:
description: Whether to attach a GPU device to the vmi.
items:
properties:
deviceName:
type: string
name:
description: Name of the GPU device as exposed by a device
plugin
type: string
tag:
description: If specified, the virtual network interface address
and its tag will be provided to the guest via config drive
type: string
virtualGPUOptions:
properties:
display:
properties:
enabled:
description: Enabled determines if a display addapter
backed by a vGPU should be enabled or disabled on
the guest. Defaults to true.
type: boolean
ramFB:
description: Enables a boot framebuffer, until the
guest OS loads a real GPU driver Defaults to true.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
type: object
type: object
type: object
required:
- deviceName
- name
type: object
type: array
x-kubernetes-list-type: atomic
hostDevices:
description: Whether to attach a host device to the vmi.
items:
properties:
deviceName:
description: DeviceName is the resource name of the host device
exposed by a device plugin
type: string
name:
type: string
tag:
description: If specified, the virtual network interface address
and its tag will be provided to the guest via config drive
type: string
required:
- deviceName
- name
type: object
type: array
x-kubernetes-list-type: atomic
inputs:
description: Inputs describe input devices
items:
properties:
bus:
description: 'Bus indicates the bus of input device to emulate.
Supported values: virtio, usb.'
type: string
name:
description: Name is the device name
type: string
type:
description: 'Type indicated the type of input device. Supported
values: tablet.'
type: string
required:
- name
- type
type: object
type: array
interfaces:
description: Interfaces describe network interfaces which are added
to the vmi.
items:
properties:
acpiIndex:
description: If specified, the ACPI index is used to provide
network interface device naming, that is stable across changes
in PCI addresses assigned to the device. This value is required
to be unique across all devices and be between 1 and (16*1024-1).
type: integer
binding:
description: 'Binding specifies the binding plugin that will
be used to connect the interface to the guest. It provides
an alternative to InterfaceBindingMethod. version: 1alphav1'
properties:
name:
description: 'Name references to the binding name as denined
in the kubevirt CR. version: 1alphav1'
type: string
required:
- name
type: object
bootOrder:
description: BootOrder is an integer value > 0, used to determine
ordering of boot devices. Lower values take precedence.
Each interface or disk that has a boot order must have a
unique value. Interfaces without a boot order are not tried.
type: integer
bridge:
description: InterfaceBridge connects to a given network via
a linux bridge.
type: object
dhcpOptions:
description: If specified the network interface will pass
additional DHCP options to the VMI
properties:
bootFileName:
description: If specified will pass option 67 to interface's
DHCP server
type: string
ntpServers:
description: If specified will pass the configured NTP
server to the VM via DHCP option 042.
items:
type: string
type: array
privateOptions:
description: 'If specified will pass extra DHCP options
for private use, range: 224-254'
items:
description: DHCPExtraOptions defines Extra DHCP options
for a VM.
properties:
option:
description: Option is an Integer value from 224-254
Required.
type: integer
value:
description: Value is a String value for the Option
provided Required.
type: string
required:
- option
- value
type: object
type: array
tftpServerName:
description: If specified will pass option 66 to interface's
DHCP server
type: string
type: object
macAddress:
description: 'Interface MAC address. For example: de:ad:00:00:be:af
or DE-AD-00-00-BE-AF.'
type: string
macvtap:
description: Deprecated, please refer to Kubevirt user guide
for alternatives.
type: object
masquerade:
description: InterfaceMasquerade connects to a given network
using netfilter rules to nat the traffic.
type: object
model:
description: 'Interface model. One of: e1000, e1000e, ne2k_pci,
pcnet, rtl8139, virtio. Defaults to virtio. TODO:(ihar)
switch to enums once opengen-api supports them. See: https://github.com/kubernetes/kube-openapi/issues/51'
type: string
name:
description: Logical name of the interface as well as a reference
to the associated networks. Must match the Name of a Network.
type: string
passt:
description: Deprecated, please refer to Kubevirt user guide
for alternatives.
type: object
pciAddress:
description: 'If specified, the virtual network interface
will be placed on the guests pci address with the specified
PCI address. For example: 0000:81:01.10'
type: string
ports:
description: List of ports to be forwarded to the virtual
machine.
items:
description: Port represents a port to expose from the virtual
machine. Default protocol TCP. The port field is mandatory
properties:
name:
description: If specified, this must be an IANA_SVC_NAME
and unique within the pod. Each named port in a pod
must have a unique name. Name for the port that can
be referred to by services.
type: string
port:
description: Number of port to expose for the virtual
machine. This must be a valid port number, 0 < x <
65536.
format: int32
type: integer
protocol:
description: Protocol for port. Must be UDP or TCP.
Defaults to "TCP".
type: string
required:
- port
type: object
type: array
slirp:
description: InterfaceSlirp connects to a given network using
QEMU user networking mode.
type: object
sriov:
description: InterfaceSRIOV connects to a given network by
passing-through an SR-IOV PCI device via vfio.
type: object
state:
description: State represents the requested operational state
of the interface. The (only) value supported is 'absent',
expressing a request to remove the interface.
type: string
tag:
description: If specified, the virtual network interface address
and its tag will be provided to the guest via config drive
type: string
required:
- name
type: object
type: array
logSerialConsole:
description: Whether to log the auto-attached default serial console
or not. Serial console logs will be collect to a file and then
streamed from a named 'guest-console-log'. Not relevant if autoattachSerialConsole
is disabled. Defaults to cluster wide setting on VirtualMachineOptions.
type: boolean
networkInterfaceMultiqueue:
description: If specified, virtual network interfaces configured
with a virtio bus will also enable the vhost multiqueue feature
for network devices. The number of queues created depends on additional
factors of the VirtualMachineInstance, like the number of guest
CPUs.
type: boolean
rng:
description: Whether to have random number generator from host
type: object
sound:
description: Whether to emulate a sound device.
properties:
model:
description: 'We only support ich9 or ac97. If SoundDevice is
not set: No sound card is emulated. If SoundDevice is set
but Model is not: ich9'
type: string
name:
description: User's defined name for this sound device
type: string
required:
- name
type: object
tpm:
description: Whether to emulate a TPM device.
properties:
persistent:
description: Persistent indicates the state of the TPM device
should be kept accross reboots Defaults to false
type: boolean
type: object
useVirtioTransitional:
description: Fall back to legacy virtio 0.9 support if virtio bus
is selected on devices. This is helpful for old machines like
CentOS6 or RHEL6 which do not understand virtio_non_transitional
(virtio 1.0).
type: boolean
watchdog:
description: Watchdog describes a watchdog device which can be added
to the vmi.
properties:
i6300esb:
description: i6300esb watchdog device.
properties:
action:
description: The action to take. Valid values are poweroff,
reset, shutdown. Defaults to reset.
type: string
type: object
name:
description: Name of the watchdog.
type: string
required:
- name
type: object
type: object
features:
description: Features like acpi, apic, hyperv, smm.
properties:
acpi:
description: ACPI enables/disables ACPI inside the guest. Defaults
to enabled.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
apic:
description: Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
endOfInterrupt:
description: EndOfInterrupt enables the end of interrupt notification
in the guest. Defaults to false.
type: boolean
type: object
hyperv:
description: Defaults to the machine type setting.
properties:
evmcs:
description: EVMCS Speeds up L2 vmexits, but disables other
virtualization features. Requires vapic. Defaults to the machine
type setting.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
frequencies:
description: Frequencies improves the TSC clock source handling
for Hyper-V on KVM. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
ipi:
description: IPI improves performances in overcommited environments.
Requires vpindex. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
reenlightenment:
description: Reenlightenment enables the notifications on TSC
frequency changes. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
relaxed:
description: Relaxed instructs the guest OS to disable watchdog
timeouts. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
reset:
description: Reset enables Hyperv reboot/reset for the vmi.
Requires synic. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
runtime:
description: Runtime improves the time accounting to improve
scheduling in the guest. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
spinlocks:
description: Spinlocks allows to configure the spinlock retry
attempts.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
spinlocks:
description: Retries indicates the number of retries. Must
be a value greater or equal 4096. Defaults to 4096.
format: int32
type: integer
type: object
synic:
description: SyNIC enables the Synthetic Interrupt Controller.
Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
synictimer:
description: SyNICTimer enables Synthetic Interrupt Controller
Timers, reducing CPU load. Defaults to the machine type setting.
properties:
direct:
description: Represents if a feature is enabled or disabled.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
enabled:
type: boolean
type: object
tlbflush:
description: TLBFlush improves performances in overcommited
environments. Requires vpindex. Defaults to the machine type
setting.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
vapic:
description: VAPIC improves the paravirtualized handling of
interrupts. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
vendorid:
description: VendorID allows setting the hypervisor vendor id.
Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
vendorid:
description: VendorID sets the hypervisor vendor id, visible
to the vmi. String up to twelve characters.
type: string
type: object
vpindex:
description: VPIndex enables the Virtual Processor Index to
help windows identifying virtual processors. Defaults to the
machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
type: object
kvm:
description: Configure how KVM presence is exposed to the guest.
properties:
hidden:
description: Hide the KVM hypervisor from standard MSR based
discovery. Defaults to false
type: boolean
type: object
pvspinlock:
description: Notify the guest that the host supports paravirtual
spinlocks. For older kernels this feature should be explicitly
disabled.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
smm:
description: SMM enables/disables System Management Mode. TSEG not
yet implemented.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
type: object
firmware:
description: Firmware.
properties:
acpi:
description: Information that can be set in the ACPI table
properties:
slicNameRef:
description: 'SlicNameRef should match the volume name of a
secret object. The data in the secret should be a binary blob
that follows the ACPI SLIC standard, see: https://learn.microsoft.com/en-us/previous-versions/windows/hardware/design/dn653305(v=vs.85)'
type: string
type: object
bootloader:
description: Settings to control the bootloader that is used.
properties:
bios:
description: If set (default), BIOS will be used.
properties:
useSerial:
description: If set, the BIOS output will be transmitted
over serial
type: boolean
type: object
efi:
description: If set, EFI will be used instead of BIOS.
properties:
persistent:
description: If set to true, Persistent will persist the
EFI NVRAM across reboots. Defaults to false
type: boolean
secureBoot:
description: If set, SecureBoot will be enabled and the
OVMF roms will be swapped for SecureBoot-enabled ones.
Requires SMM to be enabled. Defaults to true
type: boolean
type: object
type: object
kernelBoot:
description: Settings to set the kernel for booting.
properties:
container:
description: Container defines the container that containes
kernel artifacts
properties:
image:
description: Image that contains initrd / kernel files.
type: string
imagePullPolicy:
description: 'Image pull policy. One of Always, Never, IfNotPresent.
Defaults to Always if :latest tag is specified, or IfNotPresent
otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images'
type: string
imagePullSecret:
description: ImagePullSecret is the name of the Docker registry
secret required to pull the image. The secret must already
exist.
type: string
initrdPath:
description: the fully-qualified path to the ramdisk image
in the host OS
type: string
kernelPath:
description: The fully-qualified path to the kernel image
in the host OS
type: string
required:
- image
type: object
kernelArgs:
description: Arguments to be passed to the kernel at boot time
type: string
type: object
serial:
description: The system-serial-number in SMBIOS
type: string
uuid:
description: UUID reported by the vmi bios. Defaults to a random
generated uid.
type: string
type: object
ioThreadsPolicy:
description: 'Controls whether or not disks will share IOThreads. Omitting
IOThreadsPolicy disables use of IOThreads. One of: shared, auto'
type: string
launchSecurity:
description: Launch Security setting of the vmi.
properties:
sev:
description: AMD Secure Encrypted Virtualization (SEV).
properties:
attestation:
description: If specified, run the attestation process for a
vmi.
type: object
dhCert:
description: Base64 encoded guest owner's Diffie-Hellman key.
type: string
policy:
description: 'Guest policy flags as defined in AMD SEV API specification.
Note: due to security reasons it is not allowed to enable
guest debugging. Therefore NoDebug flag is not exposed to
users and is always true.'
properties:
encryptedState:
description: SEV-ES is required. Defaults to false.
type: boolean
type: object
session:
description: Base64 encoded session blob.
type: string
type: object
type: object
machine:
description: Machine type.
properties:
type:
description: QEMU machine type is the actual chipset of the VirtualMachineInstance.
type: string
type: object
memory:
description: Memory allow specifying the VMI memory features.
properties:
guest:
anyOf:
- type: integer
- type: string
description: Guest allows to specifying the amount of memory which
is visible inside the Guest OS. The Guest must lie between Requests
and Limits from the resources section. Defaults to the requested
memory in the resources section if not specified.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
hugepages:
description: Hugepages allow to use hugepages for the VirtualMachineInstance
instead of regular memory.
properties:
pageSize:
description: PageSize specifies the hugepage size, for x86_64
architecture valid values are 1Gi and 2Mi.
type: string
type: object
maxGuest:
anyOf:
- type: integer
- type: string
description: MaxGuest allows to specify the maximum amount of memory
which is visible inside the Guest OS. The delta between MaxGuest
and Guest is the amount of memory that can be hot(un)plugged.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
type: object
resources:
description: Resources describes the Compute Resources required by this
vmi.
properties:
limits:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: Limits describes the maximum amount of compute resources
allowed. Valid resource keys are "memory" and "cpu".
type: object
overcommitGuestOverhead:
description: Don't ask the scheduler to take the guest-management
overhead into account. Instead put the overhead only into the
container's memory limit. This can lead to crashes if all memory
is in use on a node. Defaults to false.
type: boolean
requests:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: Requests is a description of the initial vmi resources.
Valid resource keys are "memory" and "cpu".
type: object
type: object
required:
- devices
type: object
evictionStrategy:
description: 'EvictionStrategy describes the strategy to follow when a node
drain occurs. The possible options are: - "None": No action will be taken,
according to the specified ''RunStrategy'' the VirtualMachine will be
restarted or shutdown. - "LiveMigrate": the VirtualMachineInstance will
be migrated instead of being shutdown. - "LiveMigrateIfPossible": the
same as "LiveMigrate" but only if the VirtualMachine is Live-Migratable,
otherwise it will behave as "None". - "External": the VirtualMachineInstance
will be protected by a PDB and ''vmi.Status.EvacuationNodeName'' will
be set on eviction. This is mainly useful for cluster-api-provider-kubevirt
(capk) which needs a way for VMI''s to be blocked from eviction, yet signal
capk that eviction has been called on the VMI so the capk controller can
handle tearing the VMI down. Details can be found in the commit description
https://github.com/kubevirt/kubevirt/commit/c1d77face705c8b126696bac9a3ee3825f27f1fa.'
type: string
hostname:
description: Specifies the hostname of the vmi If not specified, the hostname
will be set to the name of the vmi, if dhcp or cloud-init is configured
properly.
type: string
livenessProbe:
description: 'Periodic probe of VirtualMachineInstance liveness. VirtualmachineInstances
will be stopped if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
properties:
exec:
description: One and only one of the following should be specified.
Exec specifies the action to take, it will be executed on the guest
through the qemu-guest-agent. If the guest agent is not available,
this probe will fail.
properties:
command:
description: Command is the command line to execute inside the container,
the working directory for the command is root ('/') in the container's
filesystem. The command is simply exec'd, it is not run inside
a shell, so traditional shell instructions ('|', etc) won't work.
To use a shell, you need to explicitly call out to that shell.
Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
items:
type: string
type: array
type: object
failureThreshold:
description: Minimum consecutive failures for the probe to be considered
failed after having succeeded. Defaults to 3. Minimum value is 1.
format: int32
type: integer
guestAgentPing:
description: GuestAgentPing contacts the qemu-guest-agent for availability
checks.
type: object
httpGet:
description: HTTPGet specifies the http request to perform.
properties:
host:
description: Host name to connect to, defaults to the pod IP. You
probably want to set "Host" in httpHeaders instead.
type: string
httpHeaders:
description: Custom headers to set in the request. HTTP allows repeated
headers.
items:
description: HTTPHeader describes a custom header to be used in
HTTP probes
properties:
name:
description: The header field name
type: string
value:
description: The header field value
type: string
required:
- name
- value
type: object
type: array
path:
description: Path to access on the HTTP server.
type: string
port:
anyOf:
- type: integer
- type: string
description: Name or number of the port to access on the container.
Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
x-kubernetes-int-or-string: true
scheme:
description: Scheme to use for connecting to the host. Defaults
to HTTP.
type: string
required:
- port
type: object
initialDelaySeconds:
description: 'Number of seconds after the VirtualMachineInstance has
started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
format: int32
type: integer
periodSeconds:
description: How often (in seconds) to perform the probe. Default to
10 seconds. Minimum value is 1.
format: int32
type: integer
successThreshold:
description: Minimum consecutive successes for the probe to be considered
successful after having failed. Defaults to 1. Must be 1 for liveness.
Minimum value is 1.
format: int32
type: integer
tcpSocket:
description: 'TCPSocket specifies an action involving a TCP port. TCP
hooks not yet supported TODO: implement a realistic TCP lifecycle
hook'
properties:
host:
description: 'Optional: Host name to connect to, defaults to the
pod IP.'
type: string
port:
anyOf:
- type: integer
- type: string
description: Number or name of the port to access on the container.
Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
x-kubernetes-int-or-string: true
required:
- port
type: object
timeoutSeconds:
description: 'Number of seconds after which the probe times out. For
exec probes the timeout fails the probe but does not terminate the
command running on the guest. This means a blocking command can result
in an increasing load on the guest. A small buffer will be added to
the resulting workload exec probe to compensate for delays caused
by the qemu guest exec mechanism. Defaults to 1 second. Minimum value
is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
format: int32
type: integer
type: object
networks:
description: List of networks that can be attached to a vm's virtual interface.
items:
description: Network represents a network type and a resource that should
be connected to the vm.
properties:
multus:
description: Represents the multus cni network.
properties:
default:
description: Select the default network and add it to the multus-cni.io/default-network
annotation.
type: boolean
networkName:
description: 'References to a NetworkAttachmentDefinition CRD
object. Format: <networkName>, <namespace>/<networkName>. If
namespace is not specified, VMI namespace is assumed.'
type: string
required:
- networkName
type: object
name:
description: 'Network name. Must be a DNS_LABEL and unique within
the vm. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names'
type: string
pod:
description: Represents the stock pod network interface.
properties:
vmIPv6NetworkCIDR:
description: IPv6 CIDR for the vm network. Defaults to fd10:0:2::/120
if not specified.
type: string
vmNetworkCIDR:
description: CIDR for vm network. Default 10.0.2.0/24 if not specified.
type: string
type: object
required:
- name
type: object
type: array
nodeSelector:
additionalProperties:
type: string
description: 'NodeSelector is a selector which must be true for the vmi
to fit on a node. Selector which must match a node''s labels for the vmi
to be scheduled on that node. More info: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/'
type: object
priorityClassName:
description: If specified, indicates the pod's priority. If not specified,
the pod priority will be default or zero if there is no default.
type: string
readinessProbe:
description: 'Periodic probe of VirtualMachineInstance service readiness.
VirtualmachineInstances will be removed from service endpoints if the
probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
properties:
exec:
description: One and only one of the following should be specified.
Exec specifies the action to take, it will be executed on the guest
through the qemu-guest-agent. If the guest agent is not available,
this probe will fail.
properties:
command:
description: Command is the command line to execute inside the container,
the working directory for the command is root ('/') in the container's
filesystem. The command is simply exec'd, it is not run inside
a shell, so traditional shell instructions ('|', etc) won't work.
To use a shell, you need to explicitly call out to that shell.
Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
items:
type: string
type: array
type: object
failureThreshold:
description: Minimum consecutive failures for the probe to be considered
failed after having succeeded. Defaults to 3. Minimum value is 1.
format: int32
type: integer
guestAgentPing:
description: GuestAgentPing contacts the qemu-guest-agent for availability
checks.
type: object
httpGet:
description: HTTPGet specifies the http request to perform.
properties:
host:
description: Host name to connect to, defaults to the pod IP. You
probably want to set "Host" in httpHeaders instead.
type: string
httpHeaders:
description: Custom headers to set in the request. HTTP allows repeated
headers.
items:
description: HTTPHeader describes a custom header to be used in
HTTP probes
properties:
name:
description: The header field name
type: string
value:
description: The header field value
type: string
required:
- name
- value
type: object
type: array
path:
description: Path to access on the HTTP server.
type: string
port:
anyOf:
- type: integer
- type: string
description: Name or number of the port to access on the container.
Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
x-kubernetes-int-or-string: true
scheme:
description: Scheme to use for connecting to the host. Defaults
to HTTP.
type: string
required:
- port
type: object
initialDelaySeconds:
description: 'Number of seconds after the VirtualMachineInstance has
started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
format: int32
type: integer
periodSeconds:
description: How often (in seconds) to perform the probe. Default to
10 seconds. Minimum value is 1.
format: int32
type: integer
successThreshold:
description: Minimum consecutive successes for the probe to be considered
successful after having failed. Defaults to 1. Must be 1 for liveness.
Minimum value is 1.
format: int32
type: integer
tcpSocket:
description: 'TCPSocket specifies an action involving a TCP port. TCP
hooks not yet supported TODO: implement a realistic TCP lifecycle
hook'
properties:
host:
description: 'Optional: Host name to connect to, defaults to the
pod IP.'
type: string
port:
anyOf:
- type: integer
- type: string
description: Number or name of the port to access on the container.
Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
x-kubernetes-int-or-string: true
required:
- port
type: object
timeoutSeconds:
description: 'Number of seconds after which the probe times out. For
exec probes the timeout fails the probe but does not terminate the
command running on the guest. This means a blocking command can result
in an increasing load on the guest. A small buffer will be added to
the resulting workload exec probe to compensate for delays caused
by the qemu guest exec mechanism. Defaults to 1 second. Minimum value
is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
format: int32
type: integer
type: object
schedulerName:
description: If specified, the VMI will be dispatched by specified scheduler.
If not specified, the VMI will be dispatched by default scheduler.
type: string
startStrategy:
description: StartStrategy can be set to "Paused" if Virtual Machine should
be started in paused state.
type: string
subdomain:
description: If specified, the fully qualified vmi hostname will be "<hostname>.<subdomain>.<pod
namespace>.svc.<cluster domain>". If not specified, the vmi will not have
a domainname at all. The DNS entry will resolve to the vmi, no matter
if the vmi itself can pick up a hostname.
type: string
terminationGracePeriodSeconds:
description: Grace period observed after signalling a VirtualMachineInstance
to stop after which the VirtualMachineInstance is force terminated.
format: int64
type: integer
tolerations:
description: If toleration is specified, obey all the toleration rules.
items:
description: The pod this Toleration is attached to tolerates any taint
that matches the triple <key,value,effect> using the matching operator
<operator>.
properties:
effect:
description: Effect indicates the taint effect to match. Empty means
match all taint effects. When specified, allowed values are NoSchedule,
PreferNoSchedule and NoExecute.
type: string
key:
description: Key is the taint key that the toleration applies to.
Empty means match all taint keys. If the key is empty, operator
must be Exists; this combination means to match all values and all
keys.
type: string
operator:
description: Operator represents a key's relationship to the value.
Valid operators are Exists and Equal. Defaults to Equal. Exists
is equivalent to wildcard for value, so that a pod can tolerate
all taints of a particular category.
type: string
tolerationSeconds:
description: TolerationSeconds represents the period of time the toleration
(which must be of effect NoExecute, otherwise this field is ignored)
tolerates the taint. By default, it is not set, which means tolerate
the taint forever (do not evict). Zero and negative values will
be treated as 0 (evict immediately) by the system.
format: int64
type: integer
value:
description: Value is the taint value the toleration matches to. If
the operator is Exists, the value should be empty, otherwise just
a regular string.
type: string
type: object
type: array
topologySpreadConstraints:
description: TopologySpreadConstraints describes how a group of VMIs will
be spread across a given topology domains. K8s scheduler will schedule
VMI pods in a way which abides by the constraints.
items:
description: TopologySpreadConstraint specifies how to spread matching
pods among the given topology.
properties:
labelSelector:
description: LabelSelector is used to find matching pods. Pods that
match this label selector are counted to determine the number of
pods in their corresponding topology domain.
properties:
matchExpressions:
description: matchExpressions is a list of label selector requirements.
The requirements are ANDed.
items:
description: A label selector requirement is a selector that
contains values, a key, and an operator that relates the key
and values.
properties:
key:
description: key is the label key that the selector applies
to.
type: string
operator:
description: operator represents a key's relationship to
a set of values. Valid operators are In, NotIn, Exists
and DoesNotExist.
type: string
values:
description: values is an array of string values. If the
operator is In or NotIn, the values array must be non-empty.
If the operator is Exists or DoesNotExist, the values
array must be empty. This array is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value} pairs. A single
{key,value} in the matchLabels map is equivalent to an element
of matchExpressions, whose key field is "key", the operator
is "In", and the values array contains only "value". The requirements
are ANDed.
type: object
type: object
matchLabelKeys:
description: MatchLabelKeys is a set of pod label keys to select the
pods over which spreading will be calculated. The keys are used
to lookup values from the incoming pod labels, those key-value labels
are ANDed with labelSelector to select the group of existing pods
over which spreading will be calculated for the incoming pod. Keys
that don't exist in the incoming pod labels will be ignored. A null
or empty list means only match against labelSelector.
items:
type: string
type: array
x-kubernetes-list-type: atomic
maxSkew:
description: 'MaxSkew describes the degree to which pods may be unevenly
distributed. When ''whenUnsatisfiable=DoNotSchedule'', it is the
maximum permitted difference between the number of matching pods
in the target topology and the global minimum. The global minimum
is the minimum number of matching pods in an eligible domain or
zero if the number of eligible domains is less than MinDomains.
For example, in a 3-zone cluster, MaxSkew is set to 1, and pods
with the same labelSelector spread as 2/2/1: In this case, the global
minimum is 1. | zone1 | zone2 | zone3 | | P P | P P | P |
- if MaxSkew is 1, incoming pod can only be scheduled to zone3 to
become 2/2/2; scheduling it onto zone1(zone2) would make the ActualSkew(3-1)
on zone1(zone2) violate MaxSkew(1). - if MaxSkew is 2, incoming
pod can be scheduled onto any zone. When ''whenUnsatisfiable=ScheduleAnyway'',
it is used to give higher precedence to topologies that satisfy
it. It''s a required field. Default value is 1 and 0 is not allowed.'
format: int32
type: integer
minDomains:
description: "MinDomains indicates a minimum number of eligible domains.
When the number of eligible domains with matching topology keys
is less than minDomains, Pod Topology Spread treats \"global minimum\"
as 0, and then the calculation of Skew is performed. And when the
number of eligible domains with matching topology keys equals or
greater than minDomains, this value has no effect on scheduling.
As a result, when the number of eligible domains is less than minDomains,
scheduler won't schedule more than maxSkew Pods to those domains.
If value is nil, the constraint behaves as if MinDomains is equal
to 1. Valid values are integers greater than 0. When value is not
nil, WhenUnsatisfiable must be DoNotSchedule. \n For example, in
a 3-zone cluster, MaxSkew is set to 2, MinDomains is set to 5 and
pods with the same labelSelector spread as 2/2/2: | zone1 | zone2
| zone3 | | P P | P P | P P | The number of domains is less
than 5(MinDomains), so \"global minimum\" is treated as 0. In this
situation, new pod with the same labelSelector cannot be scheduled,
because computed skew will be 3(3 - 0) if new Pod is scheduled to
any of the three zones, it will violate MaxSkew. \n This is a beta
field and requires the MinDomainsInPodTopologySpread feature gate
to be enabled (enabled by default)."
format: int32
type: integer
nodeAffinityPolicy:
description: "NodeAffinityPolicy indicates how we will treat Pod's
nodeAffinity/nodeSelector when calculating pod topology spread skew.
Options are: - Honor: only nodes matching nodeAffinity/nodeSelector
are included in the calculations. - Ignore: nodeAffinity/nodeSelector
are ignored. All nodes are included in the calculations. \n If this
value is nil, the behavior is equivalent to the Honor policy. This
is a beta-level feature default enabled by the NodeInclusionPolicyInPodTopologySpread
feature flag."
type: string
nodeTaintsPolicy:
description: "NodeTaintsPolicy indicates how we will treat node taints
when calculating pod topology spread skew. Options are: - Honor:
nodes without taints, along with tainted nodes for which the incoming
pod has a toleration, are included. - Ignore: node taints are ignored.
All nodes are included. \n If this value is nil, the behavior is
equivalent to the Ignore policy. This is a beta-level feature default
enabled by the NodeInclusionPolicyInPodTopologySpread feature flag."
type: string
topologyKey:
description: TopologyKey is the key of node labels. Nodes that have
a label with this key and identical values are considered to be
in the same topology. We consider each <key, value> as a "bucket",
and try to put balanced number of pods into each bucket. We define
a domain as a particular instance of a topology. Also, we define
an eligible domain as a domain whose nodes meet the requirements
of nodeAffinityPolicy and nodeTaintsPolicy. e.g. If TopologyKey
is "kubernetes.io/hostname", each Node is a domain of that topology.
And, if TopologyKey is "topology.kubernetes.io/zone", each zone
is a domain of that topology. It's a required field.
type: string
whenUnsatisfiable:
description: 'WhenUnsatisfiable indicates how to deal with a pod if
it doesn''t satisfy the spread constraint. - DoNotSchedule (default)
tells the scheduler not to schedule it. - ScheduleAnyway tells the
scheduler to schedule the pod in any location, but giving higher
precedence to topologies that would help reduce the skew. A constraint
is considered "Unsatisfiable" for an incoming pod if and only if
every possible node assignment for that pod would violate "MaxSkew"
on some topology. For example, in a 3-zone cluster, MaxSkew is set
to 1, and pods with the same labelSelector spread as 3/1/1: | zone1
| zone2 | zone3 | | P P P | P | P | If WhenUnsatisfiable
is set to DoNotSchedule, incoming pod can only be scheduled to zone2(zone3)
to become 3/2/1(3/1/2) as ActualSkew(2-1) on zone2(zone3) satisfies
MaxSkew(1). In other words, the cluster can still be imbalanced,
but scheduler won''t make it *more* imbalanced. It''s a required
field.'
type: string
required:
- maxSkew
- topologyKey
- whenUnsatisfiable
type: object
type: array
x-kubernetes-list-map-keys:
- topologyKey
- whenUnsatisfiable
x-kubernetes-list-type: map
volumes:
description: List of volumes that can be mounted by disks belonging to the
vmi.
items:
description: Volume represents a named volume in a vmi.
properties:
cloudInitConfigDrive:
description: 'CloudInitConfigDrive represents a cloud-init Config
Drive user-data source. The Config Drive data will be added as a
disk to the vmi. A proper cloud-init installation is required inside
the guest. More info: https://cloudinit.readthedocs.io/en/latest/topics/datasources/configdrive.html'
properties:
networkData:
description: NetworkData contains config drive inline cloud-init
networkdata.
type: string
networkDataBase64:
description: NetworkDataBase64 contains config drive cloud-init
networkdata as a base64 encoded string.
type: string
networkDataSecretRef:
description: NetworkDataSecretRef references a k8s secret that
contains config drive networkdata.
properties:
name:
description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind, uid?'
type: string
type: object
secretRef:
description: UserDataSecretRef references a k8s secret that contains
config drive userdata.
properties:
name:
description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind, uid?'
type: string
type: object
userData:
description: UserData contains config drive inline cloud-init
userdata.
type: string
userDataBase64:
description: UserDataBase64 contains config drive cloud-init userdata
as a base64 encoded string.
type: string
type: object
cloudInitNoCloud:
description: 'CloudInitNoCloud represents a cloud-init NoCloud user-data
source. The NoCloud data will be added as a disk to the vmi. A proper
cloud-init installation is required inside the guest. More info:
http://cloudinit.readthedocs.io/en/latest/topics/datasources/nocloud.html'
properties:
networkData:
description: NetworkData contains NoCloud inline cloud-init networkdata.
type: string
networkDataBase64:
description: NetworkDataBase64 contains NoCloud cloud-init networkdata
as a base64 encoded string.
type: string
networkDataSecretRef:
description: NetworkDataSecretRef references a k8s secret that
contains NoCloud networkdata.
properties:
name:
description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind, uid?'
type: string
type: object
secretRef:
description: UserDataSecretRef references a k8s secret that contains
NoCloud userdata.
properties:
name:
description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind, uid?'
type: string
type: object
userData:
description: UserData contains NoCloud inline cloud-init userdata.
type: string
userDataBase64:
description: UserDataBase64 contains NoCloud cloud-init userdata
as a base64 encoded string.
type: string
type: object
configMap:
description: 'ConfigMapSource represents a reference to a ConfigMap
in the same namespace. More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-pod-configmap/'
properties:
name:
description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind, uid?'
type: string
optional:
description: Specify whether the ConfigMap or it's keys must be
defined
type: boolean
volumeLabel:
description: The volume label of the resulting disk inside the
VMI. Different bootstrapping mechanisms require different values.
Typical values are "cidata" (cloud-init), "config-2" (cloud-init)
or "OEMDRV" (kickstart).
type: string
type: object
containerDisk:
description: 'ContainerDisk references a docker image, embedding a
qcow or raw disk. More info: https://kubevirt.gitbooks.io/user-guide/registry-disk.html'
properties:
image:
description: Image is the name of the image with the embedded
disk.
type: string
imagePullPolicy:
description: 'Image pull policy. One of Always, Never, IfNotPresent.
Defaults to Always if :latest tag is specified, or IfNotPresent
otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images'
type: string
imagePullSecret:
description: ImagePullSecret is the name of the Docker registry
secret required to pull the image. The secret must already exist.
type: string
path:
description: Path defines the path to disk file in the container
type: string
required:
- image
type: object
dataVolume:
description: DataVolume represents the dynamic creation a PVC for
this volume as well as the process of populating that PVC with a
disk image.
properties:
hotpluggable:
description: Hotpluggable indicates whether the volume can be
hotplugged and hotunplugged.
type: boolean
name:
description: Name of both the DataVolume and the PVC in the same
namespace. After PVC population the DataVolume is garbage collected
by default.
type: string
required:
- name
type: object
downwardAPI:
description: DownwardAPI represents downward API about the pod that
should populate this volume
properties:
fields:
description: Fields is a list of downward API volume file
items:
description: DownwardAPIVolumeFile represents information to
create the file containing the pod field
properties:
fieldRef:
description: 'Required: Selects a field of the pod: only
annotations, labels, name and namespace are supported.'
properties:
apiVersion:
description: Version of the schema the FieldPath is
written in terms of, defaults to "v1".
type: string
fieldPath:
description: Path of the field to select in the specified
API version.
type: string
required:
- fieldPath
type: object
mode:
description: 'Optional: mode bits used to set permissions
on this file, must be an octal value between 0000 and
0777 or a decimal value between 0 and 511. YAML accepts
both octal and decimal values, JSON requires decimal values
for mode bits. If not specified, the volume defaultMode
will be used. This might be in conflict with other options
that affect the file mode, like fsGroup, and the result
can be other mode bits set.'
format: int32
type: integer
path:
description: 'Required: Path is the relative path name
of the file to be created. Must not be absolute or contain
the ''..'' path. Must be utf-8 encoded. The first item
of the relative path must not start with ''..'''
type: string
resourceFieldRef:
description: 'Selects a resource of the container: only
resources limits and requests (limits.cpu, limits.memory,
requests.cpu and requests.memory) are currently supported.'
properties:
containerName:
description: 'Container name: required for volumes,
optional for env vars'
type: string
divisor:
anyOf:
- type: integer
- type: string
description: Specifies the output format of the exposed
resources, defaults to "1"
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
resource:
description: 'Required: resource to select'
type: string
required:
- resource
type: object
required:
- path
type: object
type: array
volumeLabel:
description: The volume label of the resulting disk inside the
VMI. Different bootstrapping mechanisms require different values.
Typical values are "cidata" (cloud-init), "config-2" (cloud-init)
or "OEMDRV" (kickstart).
type: string
type: object
downwardMetrics:
description: DownwardMetrics adds a very small disk to VMIs which
contains a limited view of host and guest metrics. The disk content
is compatible with vhostmd (https://github.com/vhostmd/vhostmd)
and vm-dump-metrics.
type: object
emptyDisk:
description: 'EmptyDisk represents a temporary disk which shares the
vmis lifecycle. More info: https://kubevirt.gitbooks.io/user-guide/disks-and-volumes.html'
properties:
capacity:
anyOf:
- type: integer
- type: string
description: Capacity of the sparse disk.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
required:
- capacity
type: object
ephemeral:
description: Ephemeral is a special volume source that "wraps" specified
source and provides copy-on-write image on top of it.
properties:
persistentVolumeClaim:
description: 'PersistentVolumeClaimVolumeSource represents a reference
to a PersistentVolumeClaim in the same namespace. Directly attached
to the vmi via qemu. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
properties:
claimName:
description: 'claimName is the name of a PersistentVolumeClaim
in the same namespace as the pod using this volume. More
info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
type: string
readOnly:
description: readOnly Will force the ReadOnly setting in VolumeMounts.
Default false.
type: boolean
required:
- claimName
type: object
type: object
hostDisk:
description: HostDisk represents a disk created on the cluster level
properties:
capacity:
anyOf:
- type: integer
- type: string
description: Capacity of the sparse disk
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
path:
description: The path to HostDisk image located on the cluster
type: string
shared:
description: Shared indicate whether the path is shared between
nodes
type: boolean
type:
description: Contains information if disk.img exists or should
be created allowed options are 'Disk' and 'DiskOrCreate'
type: string
required:
- path
- type
type: object
memoryDump:
description: MemoryDump is attached to the virt launcher and is populated
with a memory dump of the vmi
properties:
claimName:
description: 'claimName is the name of a PersistentVolumeClaim
in the same namespace as the pod using this volume. More info:
https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
type: string
hotpluggable:
description: Hotpluggable indicates whether the volume can be
hotplugged and hotunplugged.
type: boolean
readOnly:
description: readOnly Will force the ReadOnly setting in VolumeMounts.
Default false.
type: boolean
required:
- claimName
type: object
name:
description: 'Volume''s name. Must be a DNS_LABEL and unique within
the vmi. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names'
type: string
persistentVolumeClaim:
description: 'PersistentVolumeClaimVolumeSource represents a reference
to a PersistentVolumeClaim in the same namespace. Directly attached
to the vmi via qemu. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
properties:
claimName:
description: 'claimName is the name of a PersistentVolumeClaim
in the same namespace as the pod using this volume. More info:
https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
type: string
hotpluggable:
description: Hotpluggable indicates whether the volume can be
hotplugged and hotunplugged.
type: boolean
readOnly:
description: readOnly Will force the ReadOnly setting in VolumeMounts.
Default false.
type: boolean
required:
- claimName
type: object
secret:
description: 'SecretVolumeSource represents a reference to a secret
data in the same namespace. More info: https://kubernetes.io/docs/concepts/configuration/secret/'
properties:
optional:
description: Specify whether the Secret or it's keys must be defined
type: boolean
secretName:
description: 'Name of the secret in the pod''s namespace to use.
More info: https://kubernetes.io/docs/concepts/storage/volumes#secret'
type: string
volumeLabel:
description: The volume label of the resulting disk inside the
VMI. Different bootstrapping mechanisms require different values.
Typical values are "cidata" (cloud-init), "config-2" (cloud-init)
or "OEMDRV" (kickstart).
type: string
type: object
serviceAccount:
description: 'ServiceAccountVolumeSource represents a reference to
a service account. There can only be one volume of this type! More
info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/'
properties:
serviceAccountName:
description: 'Name of the service account in the pod''s namespace
to use. More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/'
type: string
type: object
sysprep:
description: Represents a Sysprep volume source.
properties:
configMap:
description: ConfigMap references a ConfigMap that contains Sysprep
answer file named autounattend.xml that should be attached as
disk of CDROM type.
properties:
name:
description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind, uid?'
type: string
type: object
secret:
description: Secret references a k8s Secret that contains Sysprep
answer file named autounattend.xml that should be attached as
disk of CDROM type.
properties:
name:
description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind, uid?'
type: string
type: object
type: object
required:
- name
type: object
type: array
required:
- domain
type: object
status:
description: Status is the high level overview of how the VirtualMachineInstance
is doing. It contains information available to controllers and users.
properties:
VSOCKCID:
description: VSOCKCID is used to track the allocated VSOCK CID in the VM.
format: int32
type: integer
activePods:
additionalProperties:
type: string
description: ActivePods is a mapping of pod UID to node name. It is possible
for multiple pods to be running for a single VMI during migration.
type: object
conditions:
description: Conditions are specific points in VirtualMachineInstance's
pod runtime.
items:
properties:
lastProbeTime:
format: date-time
nullable: true
type: string
lastTransitionTime:
format: date-time
nullable: true
type: string
message:
type: string
reason:
type: string
status:
type: string
type:
type: string
required:
- status
- type
type: object
type: array
currentCPUTopology:
description: CurrentCPUTopology specifies the current CPU topology used
by the VM workload. Current topology may differ from the desired topology
in the spec while CPU hotplug takes place.
properties:
cores:
description: Cores specifies the number of cores inside the vmi. Must
be a value greater or equal 1.
format: int32
type: integer
sockets:
description: Sockets specifies the number of sockets inside the vmi.
Must be a value greater or equal 1.
format: int32
type: integer
threads:
description: Threads specifies the number of threads inside the vmi.
Must be a value greater or equal 1.
format: int32
type: integer
type: object
evacuationNodeName:
description: EvacuationNodeName is used to track the eviction process of
a VMI. It stores the name of the node that we want to evacuate. It is
meant to be used by KubeVirt core components only and can't be set or
modified by users.
type: string
fsFreezeStatus:
description: FSFreezeStatus is the state of the fs of the guest it can be
either frozen or thawed
type: string
guestOSInfo:
description: Guest OS Information
properties:
id:
description: Guest OS Id
type: string
kernelRelease:
description: Guest OS Kernel Release
type: string
kernelVersion:
description: Kernel version of the Guest OS
type: string
machine:
description: Machine type of the Guest OS
type: string
name:
description: Name of the Guest OS
type: string
prettyName:
description: Guest OS Pretty Name
type: string
version:
description: Guest OS Version
type: string
versionId:
description: Version ID of the Guest OS
type: string
type: object
interfaces:
description: Interfaces represent the details of available network interfaces.
items:
properties:
infoSource:
description: 'Specifies the origin of the interface data collected.
values: domain, guest-agent, multus-status.'
type: string
interfaceName:
description: The interface name inside the Virtual Machine
type: string
ipAddress:
description: IP address of a Virtual Machine interface. It is always
the first item of IPs
type: string
ipAddresses:
description: List of all IP addresses of a Virtual Machine interface
items:
type: string
type: array
mac:
description: Hardware address of a Virtual Machine interface
type: string
name:
description: Name of the interface, corresponds to name of the network
assigned to the interface
type: string
queueCount:
description: Specifies how many queues are allocated by MultiQueue
format: int32
type: integer
type: object
type: array
kernelBootStatus:
description: KernelBootStatus contains info about the kernelBootContainer
properties:
initrdInfo:
description: InitrdInfo show info about the initrd file
properties:
checksum:
description: Checksum is the checksum of the initrd file
format: int32
type: integer
type: object
kernelInfo:
description: KernelInfo show info about the kernel image
properties:
checksum:
description: Checksum is the checksum of the kernel image
format: int32
type: integer
type: object
type: object
launcherContainerImageVersion:
description: LauncherContainerImageVersion indicates what container image
is currently active for the vmi.
type: string
machine:
description: Machine shows the final resulting qemu machine type. This can
be different than the machine type selected in the spec, due to qemus
machine type alias mechanism.
properties:
type:
description: QEMU machine type is the actual chipset of the VirtualMachineInstance.
type: string
type: object
memory:
description: Memory shows various informations about the VirtualMachine
memory.
properties:
guestAtBoot:
anyOf:
- type: integer
- type: string
description: GuestAtBoot specifies with how much memory the VirtualMachine
intiallly booted with.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
guestCurrent:
anyOf:
- type: integer
- type: string
description: GuestCurrent specifies how much memory is currently available
for the VirtualMachine.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
guestRequested:
anyOf:
- type: integer
- type: string
description: GuestRequested specifies how much memory was requested
(hotplug) for the VirtualMachine.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
type: object
migrationMethod:
description: 'Represents the method using which the vmi can be migrated:
live migration or block migration'
type: string
migrationState:
description: Represents the status of a live migration
properties:
abortRequested:
description: Indicates that the migration has been requested to abort
type: boolean
abortStatus:
description: Indicates the final status of the live migration abortion
type: string
completed:
description: Indicates the migration completed
type: boolean
endTimestamp:
description: The time the migration action ended
format: date-time
nullable: true
type: string
failed:
description: Indicates that the migration failed
type: boolean
migrationConfiguration:
description: Migration configurations to apply
properties:
allowAutoConverge:
description: AllowAutoConverge allows the platform to compromise
performance/availability of VMIs to guarantee successful VMI live
migrations. Defaults to false
type: boolean
allowPostCopy:
description: AllowPostCopy enables post-copy live migrations. Such
migrations allow even the busiest VMIs to successfully live-migrate.
However, events like a network failure can cause a VMI crash.
If set to true, migrations will still start in pre-copy, but switch
to post-copy when CompletionTimeoutPerGiB triggers. Defaults to
false
type: boolean
bandwidthPerMigration:
anyOf:
- type: integer
- type: string
description: BandwidthPerMigration limits the amount of network
bandwidth live migrations are allowed to use. The value is in
quantity per second. Defaults to 0 (no limit)
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
completionTimeoutPerGiB:
description: CompletionTimeoutPerGiB is the maximum number of seconds
per GiB a migration is allowed to take. If a live-migration takes
longer to migrate than this value multiplied by the size of the
VMI, the migration will be cancelled, unless AllowPostCopy is
true. Defaults to 800
format: int64
type: integer
disableTLS:
description: When set to true, DisableTLS will disable the additional
layer of live migration encryption provided by KubeVirt. This
is usually a bad idea. Defaults to false
type: boolean
matchSELinuxLevelOnMigration:
description: By default, the SELinux level of target virt-launcher
pods is forced to the level of the source virt-launcher. When
set to true, MatchSELinuxLevelOnMigration lets the CRI auto-assign
a random level to the target. That will ensure the target virt-launcher
doesn't share categories with another pod on the node. However,
migrations will fail when using RWX volumes that don't automatically
deal with SELinux levels.
type: boolean
network:
description: Network is the name of the CNI network to use for live
migrations. By default, migrations go through the pod network.
type: string
nodeDrainTaintKey:
description: 'NodeDrainTaintKey defines the taint key that indicates
a node should be drained. Note: this option relies on the deprecated
node taint feature. Default: kubevirt.io/drain'
type: string
parallelMigrationsPerCluster:
description: ParallelMigrationsPerCluster is the total number of
concurrent live migrations allowed cluster-wide. Defaults to 5
format: int32
type: integer
parallelOutboundMigrationsPerNode:
description: ParallelOutboundMigrationsPerNode is the maximum number
of concurrent outgoing live migrations allowed per node. Defaults
to 2
format: int32
type: integer
progressTimeout:
description: ProgressTimeout is the maximum number of seconds a
live migration is allowed to make no progress. Hitting this timeout
means a migration transferred 0 data for that many seconds. The
migration is then considered stuck and therefore cancelled. Defaults
to 150
format: int64
type: integer
unsafeMigrationOverride:
description: UnsafeMigrationOverride allows live migrations to occur
even if the compatibility check indicates the migration will be
unsafe to the guest. Defaults to false
type: boolean
type: object
migrationPolicyName:
description: Name of the migration policy. If string is empty, no policy
is matched
type: string
migrationUid:
description: The VirtualMachineInstanceMigration object associated with
this migration
type: string
mode:
description: Lets us know if the vmi is currently running pre or post
copy migration
type: string
sourceNode:
description: The source node that the VMI originated on
type: string
startTimestamp:
description: The time the migration action began
format: date-time
nullable: true
type: string
targetAttachmentPodUID:
description: The UID of the target attachment pod for hotplug volumes
type: string
targetCPUSet:
description: If the VMI requires dedicated CPUs, this field will hold
the dedicated CPU set on the target node
items:
type: integer
type: array
x-kubernetes-list-type: atomic
targetDirectMigrationNodePorts:
additionalProperties:
type: integer
description: The list of ports opened for live migration on the destination
node
type: object
targetNode:
description: The target node that the VMI is moving to
type: string
targetNodeAddress:
description: The address of the target node to use for the migration
type: string
targetNodeDomainDetected:
description: The Target Node has seen the Domain Start Event
type: boolean
targetNodeDomainReadyTimestamp:
description: The timestamp at which the target node detects the domain
is active
format: date-time
type: string
targetNodeTopology:
description: If the VMI requires dedicated CPUs, this field will hold
the numa topology on the target node
type: string
targetPod:
description: The target pod that the VMI is moving to
type: string
type: object
migrationTransport:
description: This represents the migration transport
type: string
nodeName:
description: NodeName is the name where the VirtualMachineInstance is currently
running.
type: string
phase:
description: Phase is the status of the VirtualMachineInstance in kubernetes
world. It is not the VirtualMachineInstance status, but partially correlates
to it.
type: string
phaseTransitionTimestamps:
description: PhaseTransitionTimestamp is the timestamp of when the last
phase change occurred
items:
description: VirtualMachineInstancePhaseTransitionTimestamp gives a timestamp
in relation to when a phase is set on a vmi
properties:
phase:
description: Phase is the status of the VirtualMachineInstance in
kubernetes world. It is not the VirtualMachineInstance status, but
partially correlates to it.
type: string
phaseTransitionTimestamp:
description: PhaseTransitionTimestamp is the timestamp of when the
phase change occurred
format: date-time
type: string
type: object
type: array
x-kubernetes-list-type: atomic
qosClass:
description: 'The Quality of Service (QOS) classification assigned to the
virtual machine instance based on resource requirements See PodQOSClass
type for available QOS classes More info: https://git.k8s.io/community/contributors/design-proposals/node/resource-qos.md'
type: string
reason:
description: A brief CamelCase message indicating details about why the
VMI is in this state. e.g. 'NodeUnresponsive'
type: string
runtimeUser:
description: RuntimeUser is used to determine what user will be used in
launcher
format: int64
type: integer
selinuxContext:
description: SELinuxContext is the actual SELinux context of the virt-launcher
pod
type: string
topologyHints:
properties:
tscFrequency:
format: int64
type: integer
type: object
virtualMachineRevisionName:
description: VirtualMachineRevisionName is used to get the vm revision of
the vmi when doing an online vm snapshot
type: string
volumeStatus:
description: VolumeStatus contains the statuses of all the volumes
items:
description: VolumeStatus represents information about the status of volumes
attached to the VirtualMachineInstance.
properties:
containerDiskVolume:
description: ContainerDiskVolume shows info about the containerdisk,
if the volume is a containerdisk
properties:
checksum:
description: Checksum is the checksum of the rootdisk or kernel
artifacts inside the containerdisk
format: int32
type: integer
type: object
hotplugVolume:
description: If the volume is hotplug, this will contain the hotplug
status.
properties:
attachPodName:
description: AttachPodName is the name of the pod used to attach
the volume to the node.
type: string
attachPodUID:
description: AttachPodUID is the UID of the pod used to attach
the volume to the node.
type: string
type: object
memoryDumpVolume:
description: If the volume is memorydump volume, this will contain
the memorydump info.
properties:
claimName:
description: ClaimName is the name of the pvc the memory was dumped
to
type: string
endTimestamp:
description: EndTimestamp is the time when the memory dump completed
format: date-time
type: string
startTimestamp:
description: StartTimestamp is the time when the memory dump started
format: date-time
type: string
targetFileName:
description: TargetFileName is the name of the memory dump output
type: string
type: object
message:
description: Message is a detailed message about the current hotplug
volume phase
type: string
name:
description: Name is the name of the volume
type: string
persistentVolumeClaimInfo:
description: PersistentVolumeClaimInfo is information about the PVC
that handler requires during start flow
properties:
accessModes:
description: 'AccessModes contains the desired access modes the
volume should have. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1'
items:
type: string
type: array
x-kubernetes-list-type: atomic
capacity:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: Capacity represents the capacity set on the corresponding
PVC status
type: object
filesystemOverhead:
description: Percentage of filesystem's size to be reserved when
resizing the PVC
pattern: ^(0(?:\.\d{1,3})?|1)$
type: string
preallocated:
description: Preallocated indicates if the PVC's storage is preallocated
or not
type: boolean
requests:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: Requests represents the resources requested by the
corresponding PVC spec
type: object
volumeMode:
description: VolumeMode defines what type of volume is required
by the claim. Value of Filesystem is implied when not included
in claim spec.
type: string
type: object
phase:
description: Phase is the phase
type: string
reason:
description: Reason is a brief description of why we are in the current
hotplug volume phase
type: string
size:
description: Represents the size of the volume
format: int64
type: integer
target:
description: 'Target is the target name used when adding the volume
to the VM, eg: vda'
type: string
required:
- name
- target
type: object
type: array
x-kubernetes-list-type: atomic
type: object
required:
- spec
type: object
`,
"virtualmachineinstancemigration": `openAPIV3Schema:
description: VirtualMachineInstanceMigration represents the object tracking a VMI's
migration to another host in the cluster
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest internal
value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this object
represents. Servers may infer this from the endpoint the client submits requests
to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
properties:
vmiName:
description: The name of the VMI to perform the migration on. VMI must exist
in the migration objects namespace
type: string
type: object
status:
description: VirtualMachineInstanceMigration reprents information pertaining
to a VMI's migration.
properties:
conditions:
items:
properties:
lastProbeTime:
format: date-time
nullable: true
type: string
lastTransitionTime:
format: date-time
nullable: true
type: string
message:
type: string
reason:
type: string
status:
type: string
type:
type: string
required:
- status
- type
type: object
type: array
migrationState:
description: Represents the status of a live migration
properties:
abortRequested:
description: Indicates that the migration has been requested to abort
type: boolean
abortStatus:
description: Indicates the final status of the live migration abortion
type: string
completed:
description: Indicates the migration completed
type: boolean
endTimestamp:
description: The time the migration action ended
format: date-time
nullable: true
type: string
failed:
description: Indicates that the migration failed
type: boolean
migrationConfiguration:
description: Migration configurations to apply
properties:
allowAutoConverge:
description: AllowAutoConverge allows the platform to compromise
performance/availability of VMIs to guarantee successful VMI live
migrations. Defaults to false
type: boolean
allowPostCopy:
description: AllowPostCopy enables post-copy live migrations. Such
migrations allow even the busiest VMIs to successfully live-migrate.
However, events like a network failure can cause a VMI crash.
If set to true, migrations will still start in pre-copy, but switch
to post-copy when CompletionTimeoutPerGiB triggers. Defaults to
false
type: boolean
bandwidthPerMigration:
anyOf:
- type: integer
- type: string
description: BandwidthPerMigration limits the amount of network
bandwidth live migrations are allowed to use. The value is in
quantity per second. Defaults to 0 (no limit)
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
completionTimeoutPerGiB:
description: CompletionTimeoutPerGiB is the maximum number of seconds
per GiB a migration is allowed to take. If a live-migration takes
longer to migrate than this value multiplied by the size of the
VMI, the migration will be cancelled, unless AllowPostCopy is
true. Defaults to 800
format: int64
type: integer
disableTLS:
description: When set to true, DisableTLS will disable the additional
layer of live migration encryption provided by KubeVirt. This
is usually a bad idea. Defaults to false
type: boolean
matchSELinuxLevelOnMigration:
description: By default, the SELinux level of target virt-launcher
pods is forced to the level of the source virt-launcher. When
set to true, MatchSELinuxLevelOnMigration lets the CRI auto-assign
a random level to the target. That will ensure the target virt-launcher
doesn't share categories with another pod on the node. However,
migrations will fail when using RWX volumes that don't automatically
deal with SELinux levels.
type: boolean
network:
description: Network is the name of the CNI network to use for live
migrations. By default, migrations go through the pod network.
type: string
nodeDrainTaintKey:
description: 'NodeDrainTaintKey defines the taint key that indicates
a node should be drained. Note: this option relies on the deprecated
node taint feature. Default: kubevirt.io/drain'
type: string
parallelMigrationsPerCluster:
description: ParallelMigrationsPerCluster is the total number of
concurrent live migrations allowed cluster-wide. Defaults to 5
format: int32
type: integer
parallelOutboundMigrationsPerNode:
description: ParallelOutboundMigrationsPerNode is the maximum number
of concurrent outgoing live migrations allowed per node. Defaults
to 2
format: int32
type: integer
progressTimeout:
description: ProgressTimeout is the maximum number of seconds a
live migration is allowed to make no progress. Hitting this timeout
means a migration transferred 0 data for that many seconds. The
migration is then considered stuck and therefore cancelled. Defaults
to 150
format: int64
type: integer
unsafeMigrationOverride:
description: UnsafeMigrationOverride allows live migrations to occur
even if the compatibility check indicates the migration will be
unsafe to the guest. Defaults to false
type: boolean
type: object
migrationPolicyName:
description: Name of the migration policy. If string is empty, no policy
is matched
type: string
migrationUid:
description: The VirtualMachineInstanceMigration object associated with
this migration
type: string
mode:
description: Lets us know if the vmi is currently running pre or post
copy migration
type: string
sourceNode:
description: The source node that the VMI originated on
type: string
startTimestamp:
description: The time the migration action began
format: date-time
nullable: true
type: string
targetAttachmentPodUID:
description: The UID of the target attachment pod for hotplug volumes
type: string
targetCPUSet:
description: If the VMI requires dedicated CPUs, this field will hold
the dedicated CPU set on the target node
items:
type: integer
type: array
x-kubernetes-list-type: atomic
targetDirectMigrationNodePorts:
additionalProperties:
type: integer
description: The list of ports opened for live migration on the destination
node
type: object
targetNode:
description: The target node that the VMI is moving to
type: string
targetNodeAddress:
description: The address of the target node to use for the migration
type: string
targetNodeDomainDetected:
description: The Target Node has seen the Domain Start Event
type: boolean
targetNodeDomainReadyTimestamp:
description: The timestamp at which the target node detects the domain
is active
format: date-time
type: string
targetNodeTopology:
description: If the VMI requires dedicated CPUs, this field will hold
the numa topology on the target node
type: string
targetPod:
description: The target pod that the VMI is moving to
type: string
type: object
phase:
description: VirtualMachineInstanceMigrationPhase is a label for the condition
of a VirtualMachineInstanceMigration at the current time.
type: string
phaseTransitionTimestamps:
description: PhaseTransitionTimestamp is the timestamp of when the last
phase change occurred
items:
description: VirtualMachineInstanceMigrationPhaseTransitionTimestamp gives
a timestamp in relation to when a phase is set on a vmi
properties:
phase:
description: Phase is the status of the VirtualMachineInstanceMigrationPhase
in kubernetes world. It is not the VirtualMachineInstanceMigrationPhase
status, but partially correlates to it.
type: string
phaseTransitionTimestamp:
description: PhaseTransitionTimestamp is the timestamp of when the
phase change occurred
format: date-time
type: string
type: object
type: array
x-kubernetes-list-type: atomic
type: object
required:
- spec
type: object
`,
"virtualmachineinstancepreset": `openAPIV3Schema:
description: "Deprecated for removal in v2, please use VirtualMachineInstanceType
and VirtualMachinePreference instead. \n VirtualMachineInstancePreset defines
a VMI spec.domain to be applied to all VMIs that match the provided label selector
More info: https://kubevirt.io/user-guide/virtual_machines/presets/#overrides"
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest internal
value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this object
represents. Servers may infer this from the endpoint the client submits requests
to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: VirtualMachineInstance Spec contains the VirtualMachineInstance
specification.
properties:
domain:
description: Domain is the same object type as contained in VirtualMachineInstanceSpec
properties:
chassis:
description: Chassis specifies the chassis info passed to the domain.
properties:
asset:
type: string
manufacturer:
type: string
serial:
type: string
sku:
type: string
version:
type: string
type: object
clock:
description: Clock sets the clock and timers of the vmi.
properties:
timer:
description: Timer specifies whih timers are attached to the vmi.
properties:
hpet:
description: HPET (High Precision Event Timer) - multiple timers
with periodic interrupts.
properties:
present:
description: Enabled set to false makes sure that the machine
type or a preset can't add the timer. Defaults to true.
type: boolean
tickPolicy:
description: TickPolicy determines what happens when QEMU
misses a deadline for injecting a tick to the guest. One
of "delay", "catchup", "merge", "discard".
type: string
type: object
hyperv:
description: Hyperv (Hypervclock) - lets guests read the host’s
wall clock time (paravirtualized). For windows guests.
properties:
present:
description: Enabled set to false makes sure that the machine
type or a preset can't add the timer. Defaults to true.
type: boolean
type: object
kvm:
description: "KVM \t(KVM clock) - lets guests read the host’s
wall clock time (paravirtualized). For linux guests."
properties:
present:
description: Enabled set to false makes sure that the machine
type or a preset can't add the timer. Defaults to true.
type: boolean
type: object
pit:
description: PIT (Programmable Interval Timer) - a timer with
periodic interrupts.
properties:
present:
description: Enabled set to false makes sure that the machine
type or a preset can't add the timer. Defaults to true.
type: boolean
tickPolicy:
description: TickPolicy determines what happens when QEMU
misses a deadline for injecting a tick to the guest. One
of "delay", "catchup", "discard".
type: string
type: object
rtc:
description: RTC (Real Time Clock) - a continuously running
timer with periodic interrupts.
properties:
present:
description: Enabled set to false makes sure that the machine
type or a preset can't add the timer. Defaults to true.
type: boolean
tickPolicy:
description: TickPolicy determines what happens when QEMU
misses a deadline for injecting a tick to the guest. One
of "delay", "catchup".
type: string
track:
description: Track the guest or the wall clock.
type: string
type: object
type: object
timezone:
description: Timezone sets the guest clock to the specified timezone.
Zone name follows the TZ environment variable format (e.g. 'America/New_York').
type: string
utc:
description: UTC sets the guest clock to UTC on each boot. If an
offset is specified, guest changes to the clock will be kept during
reboots and are not reset.
properties:
offsetSeconds:
description: OffsetSeconds specifies an offset in seconds, relative
to UTC. If set, guest changes to the clock will be kept during
reboots and not reset.
type: integer
type: object
type: object
cpu:
description: CPU allow specified the detailed CPU topology inside the
vmi.
properties:
cores:
description: Cores specifies the number of cores inside the vmi.
Must be a value greater or equal 1.
format: int32
type: integer
dedicatedCpuPlacement:
description: DedicatedCPUPlacement requests the scheduler to place
the VirtualMachineInstance on a node with enough dedicated pCPUs
and pin the vCPUs to it.
type: boolean
features:
description: Features specifies the CPU features list inside the
VMI.
items:
description: CPUFeature allows specifying a CPU feature.
properties:
name:
description: Name of the CPU feature
type: string
policy:
description: 'Policy is the CPU feature attribute which can
have the following attributes: force - The virtual CPU
will claim the feature is supported regardless of it being
supported by host CPU. require - Guest creation will fail
unless the feature is supported by the host CPU or the hypervisor
is able to emulate it. optional - The feature will be supported
by virtual CPU if and only if it is supported by host CPU.
disable - The feature will not be supported by virtual
CPU. forbid - Guest creation will fail if the feature
is supported by host CPU. Defaults to require'
type: string
required:
- name
type: object
type: array
isolateEmulatorThread:
description: IsolateEmulatorThread requests one more dedicated pCPU
to be allocated for the VMI to place the emulator thread on it.
type: boolean
maxSockets:
description: MaxSockets specifies the maximum amount of sockets
that can be hotplugged
format: int32
type: integer
model:
description: Model specifies the CPU model inside the VMI. List
of available models https://github.com/libvirt/libvirt/tree/master/src/cpu_map.
It is possible to specify special cases like "host-passthrough"
to get the same CPU as the node and "host-model" to get CPU closest
to the node one. Defaults to host-model.
type: string
numa:
description: NUMA allows specifying settings for the guest NUMA
topology
properties:
guestMappingPassthrough:
description: GuestMappingPassthrough will create an efficient
guest topology based on host CPUs exclusively assigned to
a pod. The created topology ensures that memory and CPUs on
the virtual numa nodes never cross boundaries of host numa
nodes.
type: object
type: object
realtime:
description: Realtime instructs the virt-launcher to tune the VMI
for lower latency, optional for real time workloads
properties:
mask:
description: 'Mask defines the vcpu mask expression that defines
which vcpus are used for realtime. Format matches libvirt''s
expressions. Example: "0-3,^1","0,2,3","2-3"'
type: string
type: object
sockets:
description: Sockets specifies the number of sockets inside the
vmi. Must be a value greater or equal 1.
format: int32
type: integer
threads:
description: Threads specifies the number of threads inside the
vmi. Must be a value greater or equal 1.
format: int32
type: integer
type: object
devices:
description: Devices allows adding disks, network interfaces, and others
properties:
autoattachGraphicsDevice:
description: Whether to attach the default graphics device or not.
VNC will not be available if set to false. Defaults to true.
type: boolean
autoattachInputDevice:
description: Whether to attach an Input Device. Defaults to false.
type: boolean
autoattachMemBalloon:
description: Whether to attach the Memory balloon device with default
period. Period can be adjusted in virt-config. Defaults to true.
type: boolean
autoattachPodInterface:
description: Whether to attach a pod network interface. Defaults
to true.
type: boolean
autoattachSerialConsole:
description: Whether to attach the default virtio-serial console
or not. Serial console access will not be available if set to
false. Defaults to true.
type: boolean
autoattachVSOCK:
description: Whether to attach the VSOCK CID to the VM or not. VSOCK
access will be available if set to true. Defaults to false.
type: boolean
blockMultiQueue:
description: Whether or not to enable virtio multi-queue for block
devices. Defaults to false.
type: boolean
clientPassthrough:
description: To configure and access client devices such as redirecting
USB
type: object
disableHotplug:
description: DisableHotplug disabled the ability to hotplug disks.
type: boolean
disks:
description: Disks describes disks, cdroms and luns which are connected
to the vmi.
items:
properties:
blockSize:
description: If specified, the virtual disk will be presented
with the given block sizes.
properties:
custom:
description: CustomBlockSize represents the desired logical
and physical block size for a VM disk.
properties:
logical:
type: integer
physical:
type: integer
required:
- logical
- physical
type: object
matchVolume:
description: Represents if a feature is enabled or disabled.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults to
true.
type: boolean
type: object
type: object
bootOrder:
description: BootOrder is an integer value > 0, used to determine
ordering of boot devices. Lower values take precedence.
Each disk or interface that has a boot order must have a
unique value. Disks without a boot order are not tried if
a disk with a boot order exists.
type: integer
cache:
description: 'Cache specifies which kvm disk cache mode should
be used. Supported values are: CacheNone, CacheWriteThrough.'
type: string
cdrom:
description: Attach a volume as a cdrom to the vmi.
properties:
bus:
description: 'Bus indicates the type of disk device to
emulate. supported values: virtio, sata, scsi.'
type: string
readonly:
description: ReadOnly. Defaults to true.
type: boolean
tray:
description: Tray indicates if the tray of the device
is open or closed. Allowed values are "open" and "closed".
Defaults to closed.
type: string
type: object
dedicatedIOThread:
description: dedicatedIOThread indicates this disk should
have an exclusive IO Thread. Enabling this implies useIOThreads
= true. Defaults to false.
type: boolean
disk:
description: Attach a volume as a disk to the vmi.
properties:
bus:
description: 'Bus indicates the type of disk device to
emulate. supported values: virtio, sata, scsi, usb.'
type: string
pciAddress:
description: 'If specified, the virtual disk will be placed
on the guests pci address with the specified PCI address.
For example: 0000:81:01.10'
type: string
readonly:
description: ReadOnly. Defaults to false.
type: boolean
type: object
errorPolicy:
description: If specified, it can change the default error
policy (stop) for the disk
type: string
io:
description: 'IO specifies which QEMU disk IO mode should
be used. Supported values are: native, default, threads.'
type: string
lun:
description: Attach a volume as a LUN to the vmi.
properties:
bus:
description: 'Bus indicates the type of disk device to
emulate. supported values: virtio, sata, scsi.'
type: string
readonly:
description: ReadOnly. Defaults to false.
type: boolean
reservation:
description: Reservation indicates if the disk needs to
support the persistent reservation for the SCSI disk
type: boolean
type: object
name:
description: Name is the device name
type: string
serial:
description: Serial provides the ability to specify a serial
number for the disk device.
type: string
shareable:
description: If specified the disk is made sharable and multiple
write from different VMs are permitted
type: boolean
tag:
description: If specified, disk address and its tag will be
provided to the guest via config drive metadata
type: string
required:
- name
type: object
type: array
downwardMetrics:
description: DownwardMetrics creates a virtio serials for exposing
the downward metrics to the vmi.
type: object
filesystems:
description: Filesystems describes filesystem which is connected
to the vmi.
items:
properties:
name:
description: Name is the device name
type: string
virtiofs:
description: Virtiofs is supported
type: object
required:
- name
- virtiofs
type: object
type: array
x-kubernetes-list-type: atomic
gpus:
description: Whether to attach a GPU device to the vmi.
items:
properties:
deviceName:
type: string
name:
description: Name of the GPU device as exposed by a device
plugin
type: string
tag:
description: If specified, the virtual network interface address
and its tag will be provided to the guest via config drive
type: string
virtualGPUOptions:
properties:
display:
properties:
enabled:
description: Enabled determines if a display addapter
backed by a vGPU should be enabled or disabled on
the guest. Defaults to true.
type: boolean
ramFB:
description: Enables a boot framebuffer, until the
guest OS loads a real GPU driver Defaults to true.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
type: object
type: object
type: object
required:
- deviceName
- name
type: object
type: array
x-kubernetes-list-type: atomic
hostDevices:
description: Whether to attach a host device to the vmi.
items:
properties:
deviceName:
description: DeviceName is the resource name of the host device
exposed by a device plugin
type: string
name:
type: string
tag:
description: If specified, the virtual network interface address
and its tag will be provided to the guest via config drive
type: string
required:
- deviceName
- name
type: object
type: array
x-kubernetes-list-type: atomic
inputs:
description: Inputs describe input devices
items:
properties:
bus:
description: 'Bus indicates the bus of input device to emulate.
Supported values: virtio, usb.'
type: string
name:
description: Name is the device name
type: string
type:
description: 'Type indicated the type of input device. Supported
values: tablet.'
type: string
required:
- name
- type
type: object
type: array
interfaces:
description: Interfaces describe network interfaces which are added
to the vmi.
items:
properties:
acpiIndex:
description: If specified, the ACPI index is used to provide
network interface device naming, that is stable across changes
in PCI addresses assigned to the device. This value is required
to be unique across all devices and be between 1 and (16*1024-1).
type: integer
binding:
description: 'Binding specifies the binding plugin that will
be used to connect the interface to the guest. It provides
an alternative to InterfaceBindingMethod. version: 1alphav1'
properties:
name:
description: 'Name references to the binding name as denined
in the kubevirt CR. version: 1alphav1'
type: string
required:
- name
type: object
bootOrder:
description: BootOrder is an integer value > 0, used to determine
ordering of boot devices. Lower values take precedence.
Each interface or disk that has a boot order must have a
unique value. Interfaces without a boot order are not tried.
type: integer
bridge:
description: InterfaceBridge connects to a given network via
a linux bridge.
type: object
dhcpOptions:
description: If specified the network interface will pass
additional DHCP options to the VMI
properties:
bootFileName:
description: If specified will pass option 67 to interface's
DHCP server
type: string
ntpServers:
description: If specified will pass the configured NTP
server to the VM via DHCP option 042.
items:
type: string
type: array
privateOptions:
description: 'If specified will pass extra DHCP options
for private use, range: 224-254'
items:
description: DHCPExtraOptions defines Extra DHCP options
for a VM.
properties:
option:
description: Option is an Integer value from 224-254
Required.
type: integer
value:
description: Value is a String value for the Option
provided Required.
type: string
required:
- option
- value
type: object
type: array
tftpServerName:
description: If specified will pass option 66 to interface's
DHCP server
type: string
type: object
macAddress:
description: 'Interface MAC address. For example: de:ad:00:00:be:af
or DE-AD-00-00-BE-AF.'
type: string
macvtap:
description: Deprecated, please refer to Kubevirt user guide
for alternatives.
type: object
masquerade:
description: InterfaceMasquerade connects to a given network
using netfilter rules to nat the traffic.
type: object
model:
description: 'Interface model. One of: e1000, e1000e, ne2k_pci,
pcnet, rtl8139, virtio. Defaults to virtio. TODO:(ihar)
switch to enums once opengen-api supports them. See: https://github.com/kubernetes/kube-openapi/issues/51'
type: string
name:
description: Logical name of the interface as well as a reference
to the associated networks. Must match the Name of a Network.
type: string
passt:
description: Deprecated, please refer to Kubevirt user guide
for alternatives.
type: object
pciAddress:
description: 'If specified, the virtual network interface
will be placed on the guests pci address with the specified
PCI address. For example: 0000:81:01.10'
type: string
ports:
description: List of ports to be forwarded to the virtual
machine.
items:
description: Port represents a port to expose from the virtual
machine. Default protocol TCP. The port field is mandatory
properties:
name:
description: If specified, this must be an IANA_SVC_NAME
and unique within the pod. Each named port in a pod
must have a unique name. Name for the port that can
be referred to by services.
type: string
port:
description: Number of port to expose for the virtual
machine. This must be a valid port number, 0 < x <
65536.
format: int32
type: integer
protocol:
description: Protocol for port. Must be UDP or TCP.
Defaults to "TCP".
type: string
required:
- port
type: object
type: array
slirp:
description: InterfaceSlirp connects to a given network using
QEMU user networking mode.
type: object
sriov:
description: InterfaceSRIOV connects to a given network by
passing-through an SR-IOV PCI device via vfio.
type: object
state:
description: State represents the requested operational state
of the interface. The (only) value supported is 'absent',
expressing a request to remove the interface.
type: string
tag:
description: If specified, the virtual network interface address
and its tag will be provided to the guest via config drive
type: string
required:
- name
type: object
type: array
logSerialConsole:
description: Whether to log the auto-attached default serial console
or not. Serial console logs will be collect to a file and then
streamed from a named 'guest-console-log'. Not relevant if autoattachSerialConsole
is disabled. Defaults to cluster wide setting on VirtualMachineOptions.
type: boolean
networkInterfaceMultiqueue:
description: If specified, virtual network interfaces configured
with a virtio bus will also enable the vhost multiqueue feature
for network devices. The number of queues created depends on additional
factors of the VirtualMachineInstance, like the number of guest
CPUs.
type: boolean
rng:
description: Whether to have random number generator from host
type: object
sound:
description: Whether to emulate a sound device.
properties:
model:
description: 'We only support ich9 or ac97. If SoundDevice is
not set: No sound card is emulated. If SoundDevice is set
but Model is not: ich9'
type: string
name:
description: User's defined name for this sound device
type: string
required:
- name
type: object
tpm:
description: Whether to emulate a TPM device.
properties:
persistent:
description: Persistent indicates the state of the TPM device
should be kept accross reboots Defaults to false
type: boolean
type: object
useVirtioTransitional:
description: Fall back to legacy virtio 0.9 support if virtio bus
is selected on devices. This is helpful for old machines like
CentOS6 or RHEL6 which do not understand virtio_non_transitional
(virtio 1.0).
type: boolean
watchdog:
description: Watchdog describes a watchdog device which can be added
to the vmi.
properties:
i6300esb:
description: i6300esb watchdog device.
properties:
action:
description: The action to take. Valid values are poweroff,
reset, shutdown. Defaults to reset.
type: string
type: object
name:
description: Name of the watchdog.
type: string
required:
- name
type: object
type: object
features:
description: Features like acpi, apic, hyperv, smm.
properties:
acpi:
description: ACPI enables/disables ACPI inside the guest. Defaults
to enabled.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
apic:
description: Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
endOfInterrupt:
description: EndOfInterrupt enables the end of interrupt notification
in the guest. Defaults to false.
type: boolean
type: object
hyperv:
description: Defaults to the machine type setting.
properties:
evmcs:
description: EVMCS Speeds up L2 vmexits, but disables other
virtualization features. Requires vapic. Defaults to the machine
type setting.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
frequencies:
description: Frequencies improves the TSC clock source handling
for Hyper-V on KVM. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
ipi:
description: IPI improves performances in overcommited environments.
Requires vpindex. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
reenlightenment:
description: Reenlightenment enables the notifications on TSC
frequency changes. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
relaxed:
description: Relaxed instructs the guest OS to disable watchdog
timeouts. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
reset:
description: Reset enables Hyperv reboot/reset for the vmi.
Requires synic. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
runtime:
description: Runtime improves the time accounting to improve
scheduling in the guest. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
spinlocks:
description: Spinlocks allows to configure the spinlock retry
attempts.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
spinlocks:
description: Retries indicates the number of retries. Must
be a value greater or equal 4096. Defaults to 4096.
format: int32
type: integer
type: object
synic:
description: SyNIC enables the Synthetic Interrupt Controller.
Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
synictimer:
description: SyNICTimer enables Synthetic Interrupt Controller
Timers, reducing CPU load. Defaults to the machine type setting.
properties:
direct:
description: Represents if a feature is enabled or disabled.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
enabled:
type: boolean
type: object
tlbflush:
description: TLBFlush improves performances in overcommited
environments. Requires vpindex. Defaults to the machine type
setting.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
vapic:
description: VAPIC improves the paravirtualized handling of
interrupts. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
vendorid:
description: VendorID allows setting the hypervisor vendor id.
Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
vendorid:
description: VendorID sets the hypervisor vendor id, visible
to the vmi. String up to twelve characters.
type: string
type: object
vpindex:
description: VPIndex enables the Virtual Processor Index to
help windows identifying virtual processors. Defaults to the
machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
type: object
kvm:
description: Configure how KVM presence is exposed to the guest.
properties:
hidden:
description: Hide the KVM hypervisor from standard MSR based
discovery. Defaults to false
type: boolean
type: object
pvspinlock:
description: Notify the guest that the host supports paravirtual
spinlocks. For older kernels this feature should be explicitly
disabled.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
smm:
description: SMM enables/disables System Management Mode. TSEG not
yet implemented.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
type: object
firmware:
description: Firmware.
properties:
acpi:
description: Information that can be set in the ACPI table
properties:
slicNameRef:
description: 'SlicNameRef should match the volume name of a
secret object. The data in the secret should be a binary blob
that follows the ACPI SLIC standard, see: https://learn.microsoft.com/en-us/previous-versions/windows/hardware/design/dn653305(v=vs.85)'
type: string
type: object
bootloader:
description: Settings to control the bootloader that is used.
properties:
bios:
description: If set (default), BIOS will be used.
properties:
useSerial:
description: If set, the BIOS output will be transmitted
over serial
type: boolean
type: object
efi:
description: If set, EFI will be used instead of BIOS.
properties:
persistent:
description: If set to true, Persistent will persist the
EFI NVRAM across reboots. Defaults to false
type: boolean
secureBoot:
description: If set, SecureBoot will be enabled and the
OVMF roms will be swapped for SecureBoot-enabled ones.
Requires SMM to be enabled. Defaults to true
type: boolean
type: object
type: object
kernelBoot:
description: Settings to set the kernel for booting.
properties:
container:
description: Container defines the container that containes
kernel artifacts
properties:
image:
description: Image that contains initrd / kernel files.
type: string
imagePullPolicy:
description: 'Image pull policy. One of Always, Never, IfNotPresent.
Defaults to Always if :latest tag is specified, or IfNotPresent
otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images'
type: string
imagePullSecret:
description: ImagePullSecret is the name of the Docker registry
secret required to pull the image. The secret must already
exist.
type: string
initrdPath:
description: the fully-qualified path to the ramdisk image
in the host OS
type: string
kernelPath:
description: The fully-qualified path to the kernel image
in the host OS
type: string
required:
- image
type: object
kernelArgs:
description: Arguments to be passed to the kernel at boot time
type: string
type: object
serial:
description: The system-serial-number in SMBIOS
type: string
uuid:
description: UUID reported by the vmi bios. Defaults to a random
generated uid.
type: string
type: object
ioThreadsPolicy:
description: 'Controls whether or not disks will share IOThreads. Omitting
IOThreadsPolicy disables use of IOThreads. One of: shared, auto'
type: string
launchSecurity:
description: Launch Security setting of the vmi.
properties:
sev:
description: AMD Secure Encrypted Virtualization (SEV).
properties:
attestation:
description: If specified, run the attestation process for a
vmi.
type: object
dhCert:
description: Base64 encoded guest owner's Diffie-Hellman key.
type: string
policy:
description: 'Guest policy flags as defined in AMD SEV API specification.
Note: due to security reasons it is not allowed to enable
guest debugging. Therefore NoDebug flag is not exposed to
users and is always true.'
properties:
encryptedState:
description: SEV-ES is required. Defaults to false.
type: boolean
type: object
session:
description: Base64 encoded session blob.
type: string
type: object
type: object
machine:
description: Machine type.
properties:
type:
description: QEMU machine type is the actual chipset of the VirtualMachineInstance.
type: string
type: object
memory:
description: Memory allow specifying the VMI memory features.
properties:
guest:
anyOf:
- type: integer
- type: string
description: Guest allows to specifying the amount of memory which
is visible inside the Guest OS. The Guest must lie between Requests
and Limits from the resources section. Defaults to the requested
memory in the resources section if not specified.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
hugepages:
description: Hugepages allow to use hugepages for the VirtualMachineInstance
instead of regular memory.
properties:
pageSize:
description: PageSize specifies the hugepage size, for x86_64
architecture valid values are 1Gi and 2Mi.
type: string
type: object
maxGuest:
anyOf:
- type: integer
- type: string
description: MaxGuest allows to specify the maximum amount of memory
which is visible inside the Guest OS. The delta between MaxGuest
and Guest is the amount of memory that can be hot(un)plugged.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
type: object
resources:
description: Resources describes the Compute Resources required by this
vmi.
properties:
limits:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: Limits describes the maximum amount of compute resources
allowed. Valid resource keys are "memory" and "cpu".
type: object
overcommitGuestOverhead:
description: Don't ask the scheduler to take the guest-management
overhead into account. Instead put the overhead only into the
container's memory limit. This can lead to crashes if all memory
is in use on a node. Defaults to false.
type: boolean
requests:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: Requests is a description of the initial vmi resources.
Valid resource keys are "memory" and "cpu".
type: object
type: object
required:
- devices
type: object
selector:
description: Selector is a label query over a set of VMIs. Required.
properties:
matchExpressions:
description: matchExpressions is a list of label selector requirements.
The requirements are ANDed.
items:
description: A label selector requirement is a selector that contains
values, a key, and an operator that relates the key and values.
properties:
key:
description: key is the label key that the selector applies to.
type: string
operator:
description: operator represents a key's relationship to a set
of values. Valid operators are In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string values. If the operator
is In or NotIn, the values array must be non-empty. If the operator
is Exists or DoesNotExist, the values array must be empty. This
array is replaced during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value} pairs. A single {key,value}
in the matchLabels map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is "In", and the values array
contains only "value". The requirements are ANDed.
type: object
type: object
required:
- selector
type: object
type: object
`,
"virtualmachineinstancereplicaset": `openAPIV3Schema:
description: VirtualMachineInstance is *the* VirtualMachineInstance Definition.
It represents a virtual machine in the runtime environment of kubernetes.
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest internal
value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this object
represents. Servers may infer this from the endpoint the client submits requests
to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: VirtualMachineInstance Spec contains the VirtualMachineInstance
specification.
properties:
paused:
description: Indicates that the replica set is paused.
type: boolean
replicas:
description: Number of desired pods. This is a pointer to distinguish between
explicit zero and not specified. Defaults to 1.
format: int32
type: integer
selector:
description: Label selector for pods. Existing ReplicaSets whose pods are
selected by this will be the ones affected by this deployment.
properties:
matchExpressions:
description: matchExpressions is a list of label selector requirements.
The requirements are ANDed.
items:
description: A label selector requirement is a selector that contains
values, a key, and an operator that relates the key and values.
properties:
key:
description: key is the label key that the selector applies to.
type: string
operator:
description: operator represents a key's relationship to a set
of values. Valid operators are In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string values. If the operator
is In or NotIn, the values array must be non-empty. If the operator
is Exists or DoesNotExist, the values array must be empty. This
array is replaced during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value} pairs. A single {key,value}
in the matchLabels map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is "In", and the values array
contains only "value". The requirements are ANDed.
type: object
type: object
template:
description: Template describes the pods that will be created.
properties:
metadata:
nullable: true
type: object
x-kubernetes-preserve-unknown-fields: true
spec:
description: VirtualMachineInstance Spec contains the VirtualMachineInstance
specification.
properties:
accessCredentials:
description: Specifies a set of public keys to inject into the vm
guest
items:
description: AccessCredential represents a credential source that
can be used to authorize remote access to the vm guest Only
one of its members may be specified.
properties:
sshPublicKey:
description: SSHPublicKey represents the source and method
of applying a ssh public key into a guest virtual machine.
properties:
propagationMethod:
description: PropagationMethod represents how the public
key is injected into the vm guest.
properties:
configDrive:
description: ConfigDrivePropagation means that the
ssh public keys are injected into the VM using metadata
using the configDrive cloud-init provider
type: object
noCloud:
description: NoCloudPropagation means that the ssh
public keys are injected into the VM using metadata
using the noCloud cloud-init provider
type: object
qemuGuestAgent:
description: QemuGuestAgentAccessCredentailPropagation
means ssh public keys are dynamically injected into
the vm at runtime via the qemu guest agent. This
feature requires the qemu guest agent to be running
within the guest.
properties:
users:
description: Users represents a list of guest
users that should have the ssh public keys added
to their authorized_keys file.
items:
type: string
type: array
x-kubernetes-list-type: set
required:
- users
type: object
type: object
source:
description: Source represents where the public keys are
pulled from
properties:
secret:
description: Secret means that the access credential
is pulled from a kubernetes secret
properties:
secretName:
description: SecretName represents the name of
the secret in the VMI's namespace
type: string
required:
- secretName
type: object
type: object
required:
- propagationMethod
- source
type: object
userPassword:
description: UserPassword represents the source and method
for applying a guest user's password
properties:
propagationMethod:
description: propagationMethod represents how the user
passwords are injected into the vm guest.
properties:
qemuGuestAgent:
description: QemuGuestAgentAccessCredentailPropagation
means passwords are dynamically injected into the
vm at runtime via the qemu guest agent. This feature
requires the qemu guest agent to be running within
the guest.
type: object
type: object
source:
description: Source represents where the user passwords
are pulled from
properties:
secret:
description: Secret means that the access credential
is pulled from a kubernetes secret
properties:
secretName:
description: SecretName represents the name of
the secret in the VMI's namespace
type: string
required:
- secretName
type: object
type: object
required:
- propagationMethod
- source
type: object
type: object
type: array
x-kubernetes-list-type: atomic
affinity:
description: If affinity is specifies, obey all the affinity rules
properties:
nodeAffinity:
description: Describes node affinity scheduling rules for the
pod.
properties:
preferredDuringSchedulingIgnoredDuringExecution:
description: The scheduler will prefer to schedule pods
to nodes that satisfy the affinity expressions specified
by this field, but it may choose a node that violates
one or more of the expressions. The node that is most
preferred is the one with the greatest sum of weights,
i.e. for each node that meets all of the scheduling requirements
(resource request, requiredDuringScheduling affinity expressions,
etc.), compute a sum by iterating through the elements
of this field and adding "weight" to the sum if the node
matches the corresponding matchExpressions; the node(s)
with the highest sum are the most preferred.
items:
description: An empty preferred scheduling term matches
all objects with implicit weight 0 (i.e. it's a no-op).
A null preferred scheduling term matches no objects
(i.e. is also a no-op).
properties:
preference:
description: A node selector term, associated with
the corresponding weight.
properties:
matchExpressions:
description: A list of node selector requirements
by node's labels.
items:
description: A node selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: The label key that the selector
applies to.
type: string
operator:
description: Represents a key's relationship
to a set of values. Valid operators are
In, NotIn, Exists, DoesNotExist. Gt, and
Lt.
type: string
values:
description: An array of string values.
If the operator is In or NotIn, the values
array must be non-empty. If the operator
is Exists or DoesNotExist, the values
array must be empty. If the operator is
Gt or Lt, the values array must have a
single element, which will be interpreted
as an integer. This array is replaced
during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchFields:
description: A list of node selector requirements
by node's fields.
items:
description: A node selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: The label key that the selector
applies to.
type: string
operator:
description: Represents a key's relationship
to a set of values. Valid operators are
In, NotIn, Exists, DoesNotExist. Gt, and
Lt.
type: string
values:
description: An array of string values.
If the operator is In or NotIn, the values
array must be non-empty. If the operator
is Exists or DoesNotExist, the values
array must be empty. If the operator is
Gt or Lt, the values array must have a
single element, which will be interpreted
as an integer. This array is replaced
during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
type: object
weight:
description: Weight associated with matching the corresponding
nodeSelectorTerm, in the range 1-100.
format: int32
type: integer
required:
- preference
- weight
type: object
type: array
requiredDuringSchedulingIgnoredDuringExecution:
description: If the affinity requirements specified by this
field are not met at scheduling time, the pod will not
be scheduled onto the node. If the affinity requirements
specified by this field cease to be met at some point
during pod execution (e.g. due to an update), the system
may or may not try to eventually evict the pod from its
node.
properties:
nodeSelectorTerms:
description: Required. A list of node selector terms.
The terms are ORed.
items:
description: A null or empty node selector term matches
no objects. The requirements of them are ANDed.
The TopologySelectorTerm type implements a subset
of the NodeSelectorTerm.
properties:
matchExpressions:
description: A list of node selector requirements
by node's labels.
items:
description: A node selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: The label key that the selector
applies to.
type: string
operator:
description: Represents a key's relationship
to a set of values. Valid operators are
In, NotIn, Exists, DoesNotExist. Gt, and
Lt.
type: string
values:
description: An array of string values.
If the operator is In or NotIn, the values
array must be non-empty. If the operator
is Exists or DoesNotExist, the values
array must be empty. If the operator is
Gt or Lt, the values array must have a
single element, which will be interpreted
as an integer. This array is replaced
during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchFields:
description: A list of node selector requirements
by node's fields.
items:
description: A node selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: The label key that the selector
applies to.
type: string
operator:
description: Represents a key's relationship
to a set of values. Valid operators are
In, NotIn, Exists, DoesNotExist. Gt, and
Lt.
type: string
values:
description: An array of string values.
If the operator is In or NotIn, the values
array must be non-empty. If the operator
is Exists or DoesNotExist, the values
array must be empty. If the operator is
Gt or Lt, the values array must have a
single element, which will be interpreted
as an integer. This array is replaced
during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
type: object
type: array
required:
- nodeSelectorTerms
type: object
type: object
podAffinity:
description: Describes pod affinity scheduling rules (e.g. co-locate
this pod in the same node, zone, etc. as some other pod(s)).
properties:
preferredDuringSchedulingIgnoredDuringExecution:
description: The scheduler will prefer to schedule pods
to nodes that satisfy the affinity expressions specified
by this field, but it may choose a node that violates
one or more of the expressions. The node that is most
preferred is the one with the greatest sum of weights,
i.e. for each node that meets all of the scheduling requirements
(resource request, requiredDuringScheduling affinity expressions,
etc.), compute a sum by iterating through the elements
of this field and adding "weight" to the sum if the node
has pods which matches the corresponding podAffinityTerm;
the node(s) with the highest sum are the most preferred.
items:
description: The weights of all of the matched WeightedPodAffinityTerm
fields are added per-node to find the most preferred
node(s)
properties:
podAffinityTerm:
description: Required. A pod affinity term, associated
with the corresponding weight.
properties:
labelSelector:
description: A label query over a set of resources,
in this case pods.
properties:
matchExpressions:
description: matchExpressions is a list of
label selector requirements. The requirements
are ANDed.
items:
description: A label selector requirement
is a selector that contains values, a
key, and an operator that relates the
key and values.
properties:
key:
description: key is the label key that
the selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty.
If the operator is Exists or DoesNotExist,
the values array must be empty. This
array is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is
"In", and the values array contains only
"value". The requirements are ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set of namespaces
that the term applies to. The term is applied
to the union of the namespaces selected by this
field and the ones listed in the namespaces
field. null selector and null or empty namespaces
list means "this pod's namespace". An empty
selector ({}) matches all namespaces.
properties:
matchExpressions:
description: matchExpressions is a list of
label selector requirements. The requirements
are ANDed.
items:
description: A label selector requirement
is a selector that contains values, a
key, and an operator that relates the
key and values.
properties:
key:
description: key is the label key that
the selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty.
If the operator is Exists or DoesNotExist,
the values array must be empty. This
array is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is
"In", and the values array contains only
"value". The requirements are ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static list
of namespace names that the term applies to.
The term is applied to the union of the namespaces
listed in this field and the ones selected by
namespaceSelector. null or empty namespaces
list and null namespaceSelector means "this
pod's namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located (affinity)
or not co-located (anti-affinity) with the pods
matching the labelSelector in the specified
namespaces, where co-located is defined as running
on a node whose value of the label with key
topologyKey matches that of any node on which
any of the selected pods is running. Empty topologyKey
is not allowed.
type: string
required:
- topologyKey
type: object
weight:
description: weight associated with matching the corresponding
podAffinityTerm, in the range 1-100.
format: int32
type: integer
required:
- podAffinityTerm
- weight
type: object
type: array
requiredDuringSchedulingIgnoredDuringExecution:
description: If the affinity requirements specified by this
field are not met at scheduling time, the pod will not
be scheduled onto the node. If the affinity requirements
specified by this field cease to be met at some point
during pod execution (e.g. due to a pod label update),
the system may or may not try to eventually evict the
pod from its node. When there are multiple elements, the
lists of nodes corresponding to each podAffinityTerm are
intersected, i.e. all terms must be satisfied.
items:
description: Defines a set of pods (namely those matching
the labelSelector relative to the given namespace(s))
that this pod should be co-located (affinity) or not
co-located (anti-affinity) with, where co-located is
defined as running on a node whose value of the label
with key <topologyKey> matches that of any node on which
a pod of the set of pods is running
properties:
labelSelector:
description: A label query over a set of resources,
in this case pods.
properties:
matchExpressions:
description: matchExpressions is a list of label
selector requirements. The requirements are
ANDed.
items:
description: A label selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: key is the label key that the
selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty. If
the operator is Exists or DoesNotExist,
the values array must be empty. This array
is replaced during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is "In",
and the values array contains only "value".
The requirements are ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set of namespaces
that the term applies to. The term is applied to
the union of the namespaces selected by this field
and the ones listed in the namespaces field. null
selector and null or empty namespaces list means
"this pod's namespace". An empty selector ({}) matches
all namespaces.
properties:
matchExpressions:
description: matchExpressions is a list of label
selector requirements. The requirements are
ANDed.
items:
description: A label selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: key is the label key that the
selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty. If
the operator is Exists or DoesNotExist,
the values array must be empty. This array
is replaced during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is "In",
and the values array contains only "value".
The requirements are ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static list of
namespace names that the term applies to. The term
is applied to the union of the namespaces listed
in this field and the ones selected by namespaceSelector.
null or empty namespaces list and null namespaceSelector
means "this pod's namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located (affinity)
or not co-located (anti-affinity) with the pods
matching the labelSelector in the specified namespaces,
where co-located is defined as running on a node
whose value of the label with key topologyKey matches
that of any node on which any of the selected pods
is running. Empty topologyKey is not allowed.
type: string
required:
- topologyKey
type: object
type: array
type: object
podAntiAffinity:
description: Describes pod anti-affinity scheduling rules (e.g.
avoid putting this pod in the same node, zone, etc. as some
other pod(s)).
properties:
preferredDuringSchedulingIgnoredDuringExecution:
description: The scheduler will prefer to schedule pods
to nodes that satisfy the anti-affinity expressions specified
by this field, but it may choose a node that violates
one or more of the expressions. The node that is most
preferred is the one with the greatest sum of weights,
i.e. for each node that meets all of the scheduling requirements
(resource request, requiredDuringScheduling anti-affinity
expressions, etc.), compute a sum by iterating through
the elements of this field and adding "weight" to the
sum if the node has pods which matches the corresponding
podAffinityTerm; the node(s) with the highest sum are
the most preferred.
items:
description: The weights of all of the matched WeightedPodAffinityTerm
fields are added per-node to find the most preferred
node(s)
properties:
podAffinityTerm:
description: Required. A pod affinity term, associated
with the corresponding weight.
properties:
labelSelector:
description: A label query over a set of resources,
in this case pods.
properties:
matchExpressions:
description: matchExpressions is a list of
label selector requirements. The requirements
are ANDed.
items:
description: A label selector requirement
is a selector that contains values, a
key, and an operator that relates the
key and values.
properties:
key:
description: key is the label key that
the selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty.
If the operator is Exists or DoesNotExist,
the values array must be empty. This
array is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is
"In", and the values array contains only
"value". The requirements are ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set of namespaces
that the term applies to. The term is applied
to the union of the namespaces selected by this
field and the ones listed in the namespaces
field. null selector and null or empty namespaces
list means "this pod's namespace". An empty
selector ({}) matches all namespaces.
properties:
matchExpressions:
description: matchExpressions is a list of
label selector requirements. The requirements
are ANDed.
items:
description: A label selector requirement
is a selector that contains values, a
key, and an operator that relates the
key and values.
properties:
key:
description: key is the label key that
the selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty.
If the operator is Exists or DoesNotExist,
the values array must be empty. This
array is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is
"In", and the values array contains only
"value". The requirements are ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static list
of namespace names that the term applies to.
The term is applied to the union of the namespaces
listed in this field and the ones selected by
namespaceSelector. null or empty namespaces
list and null namespaceSelector means "this
pod's namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located (affinity)
or not co-located (anti-affinity) with the pods
matching the labelSelector in the specified
namespaces, where co-located is defined as running
on a node whose value of the label with key
topologyKey matches that of any node on which
any of the selected pods is running. Empty topologyKey
is not allowed.
type: string
required:
- topologyKey
type: object
weight:
description: weight associated with matching the corresponding
podAffinityTerm, in the range 1-100.
format: int32
type: integer
required:
- podAffinityTerm
- weight
type: object
type: array
requiredDuringSchedulingIgnoredDuringExecution:
description: If the anti-affinity requirements specified
by this field are not met at scheduling time, the pod
will not be scheduled onto the node. If the anti-affinity
requirements specified by this field cease to be met at
some point during pod execution (e.g. due to a pod label
update), the system may or may not try to eventually evict
the pod from its node. When there are multiple elements,
the lists of nodes corresponding to each podAffinityTerm
are intersected, i.e. all terms must be satisfied.
items:
description: Defines a set of pods (namely those matching
the labelSelector relative to the given namespace(s))
that this pod should be co-located (affinity) or not
co-located (anti-affinity) with, where co-located is
defined as running on a node whose value of the label
with key <topologyKey> matches that of any node on which
a pod of the set of pods is running
properties:
labelSelector:
description: A label query over a set of resources,
in this case pods.
properties:
matchExpressions:
description: matchExpressions is a list of label
selector requirements. The requirements are
ANDed.
items:
description: A label selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: key is the label key that the
selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty. If
the operator is Exists or DoesNotExist,
the values array must be empty. This array
is replaced during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is "In",
and the values array contains only "value".
The requirements are ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set of namespaces
that the term applies to. The term is applied to
the union of the namespaces selected by this field
and the ones listed in the namespaces field. null
selector and null or empty namespaces list means
"this pod's namespace". An empty selector ({}) matches
all namespaces.
properties:
matchExpressions:
description: matchExpressions is a list of label
selector requirements. The requirements are
ANDed.
items:
description: A label selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: key is the label key that the
selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty. If
the operator is Exists or DoesNotExist,
the values array must be empty. This array
is replaced during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is "In",
and the values array contains only "value".
The requirements are ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static list of
namespace names that the term applies to. The term
is applied to the union of the namespaces listed
in this field and the ones selected by namespaceSelector.
null or empty namespaces list and null namespaceSelector
means "this pod's namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located (affinity)
or not co-located (anti-affinity) with the pods
matching the labelSelector in the specified namespaces,
where co-located is defined as running on a node
whose value of the label with key topologyKey matches
that of any node on which any of the selected pods
is running. Empty topologyKey is not allowed.
type: string
required:
- topologyKey
type: object
type: array
type: object
type: object
architecture:
description: Specifies the architecture of the vm guest you are
attempting to run. Defaults to the compiled architecture of the
KubeVirt components
type: string
dnsConfig:
description: Specifies the DNS parameters of a pod. Parameters specified
here will be merged to the generated DNS configuration based on
DNSPolicy.
properties:
nameservers:
description: A list of DNS name server IP addresses. This will
be appended to the base nameservers generated from DNSPolicy.
Duplicated nameservers will be removed.
items:
type: string
type: array
options:
description: A list of DNS resolver options. This will be merged
with the base options generated from DNSPolicy. Duplicated
entries will be removed. Resolution options given in Options
will override those that appear in the base DNSPolicy.
items:
description: PodDNSConfigOption defines DNS resolver options
of a pod.
properties:
name:
description: Required.
type: string
value:
type: string
type: object
type: array
searches:
description: A list of DNS search domains for host-name lookup.
This will be appended to the base search paths generated from
DNSPolicy. Duplicated search paths will be removed.
items:
type: string
type: array
type: object
dnsPolicy:
description: Set DNS policy for the pod. Defaults to "ClusterFirst".
Valid values are 'ClusterFirstWithHostNet', 'ClusterFirst', 'Default'
or 'None'. DNS parameters given in DNSConfig will be merged with
the policy selected with DNSPolicy. To have DNS options set along
with hostNetwork, you have to specify DNS policy explicitly to
'ClusterFirstWithHostNet'.
type: string
domain:
description: Specification of the desired behavior of the VirtualMachineInstance
on the host.
properties:
chassis:
description: Chassis specifies the chassis info passed to the
domain.
properties:
asset:
type: string
manufacturer:
type: string
serial:
type: string
sku:
type: string
version:
type: string
type: object
clock:
description: Clock sets the clock and timers of the vmi.
properties:
timer:
description: Timer specifies whih timers are attached to
the vmi.
properties:
hpet:
description: HPET (High Precision Event Timer) - multiple
timers with periodic interrupts.
properties:
present:
description: Enabled set to false makes sure that
the machine type or a preset can't add the timer.
Defaults to true.
type: boolean
tickPolicy:
description: TickPolicy determines what happens
when QEMU misses a deadline for injecting a tick
to the guest. One of "delay", "catchup", "merge",
"discard".
type: string
type: object
hyperv:
description: Hyperv (Hypervclock) - lets guests read
the host’s wall clock time (paravirtualized). For
windows guests.
properties:
present:
description: Enabled set to false makes sure that
the machine type or a preset can't add the timer.
Defaults to true.
type: boolean
type: object
kvm:
description: "KVM \t(KVM clock) - lets guests read the
host’s wall clock time (paravirtualized). For linux
guests."
properties:
present:
description: Enabled set to false makes sure that
the machine type or a preset can't add the timer.
Defaults to true.
type: boolean
type: object
pit:
description: PIT (Programmable Interval Timer) - a timer
with periodic interrupts.
properties:
present:
description: Enabled set to false makes sure that
the machine type or a preset can't add the timer.
Defaults to true.
type: boolean
tickPolicy:
description: TickPolicy determines what happens
when QEMU misses a deadline for injecting a tick
to the guest. One of "delay", "catchup", "discard".
type: string
type: object
rtc:
description: RTC (Real Time Clock) - a continuously
running timer with periodic interrupts.
properties:
present:
description: Enabled set to false makes sure that
the machine type or a preset can't add the timer.
Defaults to true.
type: boolean
tickPolicy:
description: TickPolicy determines what happens
when QEMU misses a deadline for injecting a tick
to the guest. One of "delay", "catchup".
type: string
track:
description: Track the guest or the wall clock.
type: string
type: object
type: object
timezone:
description: Timezone sets the guest clock to the specified
timezone. Zone name follows the TZ environment variable
format (e.g. 'America/New_York').
type: string
utc:
description: UTC sets the guest clock to UTC on each boot.
If an offset is specified, guest changes to the clock
will be kept during reboots and are not reset.
properties:
offsetSeconds:
description: OffsetSeconds specifies an offset in seconds,
relative to UTC. If set, guest changes to the clock
will be kept during reboots and not reset.
type: integer
type: object
type: object
cpu:
description: CPU allow specified the detailed CPU topology inside
the vmi.
properties:
cores:
description: Cores specifies the number of cores inside
the vmi. Must be a value greater or equal 1.
format: int32
type: integer
dedicatedCpuPlacement:
description: DedicatedCPUPlacement requests the scheduler
to place the VirtualMachineInstance on a node with enough
dedicated pCPUs and pin the vCPUs to it.
type: boolean
features:
description: Features specifies the CPU features list inside
the VMI.
items:
description: CPUFeature allows specifying a CPU feature.
properties:
name:
description: Name of the CPU feature
type: string
policy:
description: 'Policy is the CPU feature attribute
which can have the following attributes: force -
The virtual CPU will claim the feature is supported
regardless of it being supported by host CPU. require -
Guest creation will fail unless the feature is supported
by the host CPU or the hypervisor is able to emulate
it. optional - The feature will be supported by
virtual CPU if and only if it is supported by host
CPU. disable - The feature will not be supported
by virtual CPU. forbid - Guest creation will fail
if the feature is supported by host CPU. Defaults
to require'
type: string
required:
- name
type: object
type: array
isolateEmulatorThread:
description: IsolateEmulatorThread requests one more dedicated
pCPU to be allocated for the VMI to place the emulator
thread on it.
type: boolean
maxSockets:
description: MaxSockets specifies the maximum amount of
sockets that can be hotplugged
format: int32
type: integer
model:
description: Model specifies the CPU model inside the VMI.
List of available models https://github.com/libvirt/libvirt/tree/master/src/cpu_map.
It is possible to specify special cases like "host-passthrough"
to get the same CPU as the node and "host-model" to get
CPU closest to the node one. Defaults to host-model.
type: string
numa:
description: NUMA allows specifying settings for the guest
NUMA topology
properties:
guestMappingPassthrough:
description: GuestMappingPassthrough will create an
efficient guest topology based on host CPUs exclusively
assigned to a pod. The created topology ensures that
memory and CPUs on the virtual numa nodes never cross
boundaries of host numa nodes.
type: object
type: object
realtime:
description: Realtime instructs the virt-launcher to tune
the VMI for lower latency, optional for real time workloads
properties:
mask:
description: 'Mask defines the vcpu mask expression
that defines which vcpus are used for realtime. Format
matches libvirt''s expressions. Example: "0-3,^1","0,2,3","2-3"'
type: string
type: object
sockets:
description: Sockets specifies the number of sockets inside
the vmi. Must be a value greater or equal 1.
format: int32
type: integer
threads:
description: Threads specifies the number of threads inside
the vmi. Must be a value greater or equal 1.
format: int32
type: integer
type: object
devices:
description: Devices allows adding disks, network interfaces,
and others
properties:
autoattachGraphicsDevice:
description: Whether to attach the default graphics device
or not. VNC will not be available if set to false. Defaults
to true.
type: boolean
autoattachInputDevice:
description: Whether to attach an Input Device. Defaults
to false.
type: boolean
autoattachMemBalloon:
description: Whether to attach the Memory balloon device
with default period. Period can be adjusted in virt-config.
Defaults to true.
type: boolean
autoattachPodInterface:
description: Whether to attach a pod network interface.
Defaults to true.
type: boolean
autoattachSerialConsole:
description: Whether to attach the default virtio-serial
console or not. Serial console access will not be available
if set to false. Defaults to true.
type: boolean
autoattachVSOCK:
description: Whether to attach the VSOCK CID to the VM or
not. VSOCK access will be available if set to true. Defaults
to false.
type: boolean
blockMultiQueue:
description: Whether or not to enable virtio multi-queue
for block devices. Defaults to false.
type: boolean
clientPassthrough:
description: To configure and access client devices such
as redirecting USB
type: object
disableHotplug:
description: DisableHotplug disabled the ability to hotplug
disks.
type: boolean
disks:
description: Disks describes disks, cdroms and luns which
are connected to the vmi.
items:
properties:
blockSize:
description: If specified, the virtual disk will be
presented with the given block sizes.
properties:
custom:
description: CustomBlockSize represents the desired
logical and physical block size for a VM disk.
properties:
logical:
type: integer
physical:
type: integer
required:
- logical
- physical
type: object
matchVolume:
description: Represents if a feature is enabled
or disabled.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
type: object
type: object
bootOrder:
description: BootOrder is an integer value > 0, used
to determine ordering of boot devices. Lower values
take precedence. Each disk or interface that has
a boot order must have a unique value. Disks without
a boot order are not tried if a disk with a boot
order exists.
type: integer
cache:
description: 'Cache specifies which kvm disk cache
mode should be used. Supported values are: CacheNone,
CacheWriteThrough.'
type: string
cdrom:
description: Attach a volume as a cdrom to the vmi.
properties:
bus:
description: 'Bus indicates the type of disk device
to emulate. supported values: virtio, sata,
scsi.'
type: string
readonly:
description: ReadOnly. Defaults to true.
type: boolean
tray:
description: Tray indicates if the tray of the
device is open or closed. Allowed values are
"open" and "closed". Defaults to closed.
type: string
type: object
dedicatedIOThread:
description: dedicatedIOThread indicates this disk
should have an exclusive IO Thread. Enabling this
implies useIOThreads = true. Defaults to false.
type: boolean
disk:
description: Attach a volume as a disk to the vmi.
properties:
bus:
description: 'Bus indicates the type of disk device
to emulate. supported values: virtio, sata,
scsi, usb.'
type: string
pciAddress:
description: 'If specified, the virtual disk will
be placed on the guests pci address with the
specified PCI address. For example: 0000:81:01.10'
type: string
readonly:
description: ReadOnly. Defaults to false.
type: boolean
type: object
errorPolicy:
description: If specified, it can change the default
error policy (stop) for the disk
type: string
io:
description: 'IO specifies which QEMU disk IO mode
should be used. Supported values are: native, default,
threads.'
type: string
lun:
description: Attach a volume as a LUN to the vmi.
properties:
bus:
description: 'Bus indicates the type of disk device
to emulate. supported values: virtio, sata,
scsi.'
type: string
readonly:
description: ReadOnly. Defaults to false.
type: boolean
reservation:
description: Reservation indicates if the disk
needs to support the persistent reservation
for the SCSI disk
type: boolean
type: object
name:
description: Name is the device name
type: string
serial:
description: Serial provides the ability to specify
a serial number for the disk device.
type: string
shareable:
description: If specified the disk is made sharable
and multiple write from different VMs are permitted
type: boolean
tag:
description: If specified, disk address and its tag
will be provided to the guest via config drive metadata
type: string
required:
- name
type: object
type: array
downwardMetrics:
description: DownwardMetrics creates a virtio serials for
exposing the downward metrics to the vmi.
type: object
filesystems:
description: Filesystems describes filesystem which is connected
to the vmi.
items:
properties:
name:
description: Name is the device name
type: string
virtiofs:
description: Virtiofs is supported
type: object
required:
- name
- virtiofs
type: object
type: array
x-kubernetes-list-type: atomic
gpus:
description: Whether to attach a GPU device to the vmi.
items:
properties:
deviceName:
type: string
name:
description: Name of the GPU device as exposed by
a device plugin
type: string
tag:
description: If specified, the virtual network interface
address and its tag will be provided to the guest
via config drive
type: string
virtualGPUOptions:
properties:
display:
properties:
enabled:
description: Enabled determines if a display
addapter backed by a vGPU should be enabled
or disabled on the guest. Defaults to true.
type: boolean
ramFB:
description: Enables a boot framebuffer, until
the guest OS loads a real GPU driver Defaults
to true.
properties:
enabled:
description: Enabled determines if the
feature should be enabled or disabled
on the guest. Defaults to true.
type: boolean
type: object
type: object
type: object
required:
- deviceName
- name
type: object
type: array
x-kubernetes-list-type: atomic
hostDevices:
description: Whether to attach a host device to the vmi.
items:
properties:
deviceName:
description: DeviceName is the resource name of the
host device exposed by a device plugin
type: string
name:
type: string
tag:
description: If specified, the virtual network interface
address and its tag will be provided to the guest
via config drive
type: string
required:
- deviceName
- name
type: object
type: array
x-kubernetes-list-type: atomic
inputs:
description: Inputs describe input devices
items:
properties:
bus:
description: 'Bus indicates the bus of input device
to emulate. Supported values: virtio, usb.'
type: string
name:
description: Name is the device name
type: string
type:
description: 'Type indicated the type of input device.
Supported values: tablet.'
type: string
required:
- name
- type
type: object
type: array
interfaces:
description: Interfaces describe network interfaces which
are added to the vmi.
items:
properties:
acpiIndex:
description: If specified, the ACPI index is used
to provide network interface device naming, that
is stable across changes in PCI addresses assigned
to the device. This value is required to be unique
across all devices and be between 1 and (16*1024-1).
type: integer
binding:
description: 'Binding specifies the binding plugin
that will be used to connect the interface to the
guest. It provides an alternative to InterfaceBindingMethod.
version: 1alphav1'
properties:
name:
description: 'Name references to the binding name
as denined in the kubevirt CR. version: 1alphav1'
type: string
required:
- name
type: object
bootOrder:
description: BootOrder is an integer value > 0, used
to determine ordering of boot devices. Lower values
take precedence. Each interface or disk that has
a boot order must have a unique value. Interfaces
without a boot order are not tried.
type: integer
bridge:
description: InterfaceBridge connects to a given network
via a linux bridge.
type: object
dhcpOptions:
description: If specified the network interface will
pass additional DHCP options to the VMI
properties:
bootFileName:
description: If specified will pass option 67
to interface's DHCP server
type: string
ntpServers:
description: If specified will pass the configured
NTP server to the VM via DHCP option 042.
items:
type: string
type: array
privateOptions:
description: 'If specified will pass extra DHCP
options for private use, range: 224-254'
items:
description: DHCPExtraOptions defines Extra
DHCP options for a VM.
properties:
option:
description: Option is an Integer value
from 224-254 Required.
type: integer
value:
description: Value is a String value for
the Option provided Required.
type: string
required:
- option
- value
type: object
type: array
tftpServerName:
description: If specified will pass option 66
to interface's DHCP server
type: string
type: object
macAddress:
description: 'Interface MAC address. For example:
de:ad:00:00:be:af or DE-AD-00-00-BE-AF.'
type: string
macvtap:
description: Deprecated, please refer to Kubevirt
user guide for alternatives.
type: object
masquerade:
description: InterfaceMasquerade connects to a given
network using netfilter rules to nat the traffic.
type: object
model:
description: 'Interface model. One of: e1000, e1000e,
ne2k_pci, pcnet, rtl8139, virtio. Defaults to virtio.
TODO:(ihar) switch to enums once opengen-api supports
them. See: https://github.com/kubernetes/kube-openapi/issues/51'
type: string
name:
description: Logical name of the interface as well
as a reference to the associated networks. Must
match the Name of a Network.
type: string
passt:
description: Deprecated, please refer to Kubevirt
user guide for alternatives.
type: object
pciAddress:
description: 'If specified, the virtual network interface
will be placed on the guests pci address with the
specified PCI address. For example: 0000:81:01.10'
type: string
ports:
description: List of ports to be forwarded to the
virtual machine.
items:
description: Port represents a port to expose from
the virtual machine. Default protocol TCP. The
port field is mandatory
properties:
name:
description: If specified, this must be an IANA_SVC_NAME
and unique within the pod. Each named port
in a pod must have a unique name. Name for
the port that can be referred to by services.
type: string
port:
description: Number of port to expose for the
virtual machine. This must be a valid port
number, 0 < x < 65536.
format: int32
type: integer
protocol:
description: Protocol for port. Must be UDP
or TCP. Defaults to "TCP".
type: string
required:
- port
type: object
type: array
slirp:
description: InterfaceSlirp connects to a given network
using QEMU user networking mode.
type: object
sriov:
description: InterfaceSRIOV connects to a given network
by passing-through an SR-IOV PCI device via vfio.
type: object
state:
description: State represents the requested operational
state of the interface. The (only) value supported
is 'absent', expressing a request to remove the
interface.
type: string
tag:
description: If specified, the virtual network interface
address and its tag will be provided to the guest
via config drive
type: string
required:
- name
type: object
type: array
logSerialConsole:
description: Whether to log the auto-attached default serial
console or not. Serial console logs will be collect to
a file and then streamed from a named 'guest-console-log'.
Not relevant if autoattachSerialConsole is disabled. Defaults
to cluster wide setting on VirtualMachineOptions.
type: boolean
networkInterfaceMultiqueue:
description: If specified, virtual network interfaces configured
with a virtio bus will also enable the vhost multiqueue
feature for network devices. The number of queues created
depends on additional factors of the VirtualMachineInstance,
like the number of guest CPUs.
type: boolean
rng:
description: Whether to have random number generator from
host
type: object
sound:
description: Whether to emulate a sound device.
properties:
model:
description: 'We only support ich9 or ac97. If SoundDevice
is not set: No sound card is emulated. If SoundDevice
is set but Model is not: ich9'
type: string
name:
description: User's defined name for this sound device
type: string
required:
- name
type: object
tpm:
description: Whether to emulate a TPM device.
properties:
persistent:
description: Persistent indicates the state of the TPM
device should be kept accross reboots Defaults to
false
type: boolean
type: object
useVirtioTransitional:
description: Fall back to legacy virtio 0.9 support if virtio
bus is selected on devices. This is helpful for old machines
like CentOS6 or RHEL6 which do not understand virtio_non_transitional
(virtio 1.0).
type: boolean
watchdog:
description: Watchdog describes a watchdog device which
can be added to the vmi.
properties:
i6300esb:
description: i6300esb watchdog device.
properties:
action:
description: The action to take. Valid values are
poweroff, reset, shutdown. Defaults to reset.
type: string
type: object
name:
description: Name of the watchdog.
type: string
required:
- name
type: object
type: object
features:
description: Features like acpi, apic, hyperv, smm.
properties:
acpi:
description: ACPI enables/disables ACPI inside the guest.
Defaults to enabled.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
apic:
description: Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults to true.
type: boolean
endOfInterrupt:
description: EndOfInterrupt enables the end of interrupt
notification in the guest. Defaults to false.
type: boolean
type: object
hyperv:
description: Defaults to the machine type setting.
properties:
evmcs:
description: EVMCS Speeds up L2 vmexits, but disables
other virtualization features. Requires vapic. Defaults
to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
type: object
frequencies:
description: Frequencies improves the TSC clock source
handling for Hyper-V on KVM. Defaults to the machine
type setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
type: object
ipi:
description: IPI improves performances in overcommited
environments. Requires vpindex. Defaults to the machine
type setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
type: object
reenlightenment:
description: Reenlightenment enables the notifications
on TSC frequency changes. Defaults to the machine
type setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
type: object
relaxed:
description: Relaxed instructs the guest OS to disable
watchdog timeouts. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
type: object
reset:
description: Reset enables Hyperv reboot/reset for the
vmi. Requires synic. Defaults to the machine type
setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
type: object
runtime:
description: Runtime improves the time accounting to
improve scheduling in the guest. Defaults to the machine
type setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
type: object
spinlocks:
description: Spinlocks allows to configure the spinlock
retry attempts.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
spinlocks:
description: Retries indicates the number of retries.
Must be a value greater or equal 4096. Defaults
to 4096.
format: int32
type: integer
type: object
synic:
description: SyNIC enables the Synthetic Interrupt Controller.
Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
type: object
synictimer:
description: SyNICTimer enables Synthetic Interrupt
Controller Timers, reducing CPU load. Defaults to
the machine type setting.
properties:
direct:
description: Represents if a feature is enabled
or disabled.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
type: object
enabled:
type: boolean
type: object
tlbflush:
description: TLBFlush improves performances in overcommited
environments. Requires vpindex. Defaults to the machine
type setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
type: object
vapic:
description: VAPIC improves the paravirtualized handling
of interrupts. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
type: object
vendorid:
description: VendorID allows setting the hypervisor
vendor id. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
vendorid:
description: VendorID sets the hypervisor vendor
id, visible to the vmi. String up to twelve characters.
type: string
type: object
vpindex:
description: VPIndex enables the Virtual Processor Index
to help windows identifying virtual processors. Defaults
to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults
to true.
type: boolean
type: object
type: object
kvm:
description: Configure how KVM presence is exposed to the
guest.
properties:
hidden:
description: Hide the KVM hypervisor from standard MSR
based discovery. Defaults to false
type: boolean
type: object
pvspinlock:
description: Notify the guest that the host supports paravirtual
spinlocks. For older kernels this feature should be explicitly
disabled.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
smm:
description: SMM enables/disables System Management Mode.
TSEG not yet implemented.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
type: object
firmware:
description: Firmware.
properties:
acpi:
description: Information that can be set in the ACPI table
properties:
slicNameRef:
description: 'SlicNameRef should match the volume name
of a secret object. The data in the secret should
be a binary blob that follows the ACPI SLIC standard,
see: https://learn.microsoft.com/en-us/previous-versions/windows/hardware/design/dn653305(v=vs.85)'
type: string
type: object
bootloader:
description: Settings to control the bootloader that is
used.
properties:
bios:
description: If set (default), BIOS will be used.
properties:
useSerial:
description: If set, the BIOS output will be transmitted
over serial
type: boolean
type: object
efi:
description: If set, EFI will be used instead of BIOS.
properties:
persistent:
description: If set to true, Persistent will persist
the EFI NVRAM across reboots. Defaults to false
type: boolean
secureBoot:
description: If set, SecureBoot will be enabled
and the OVMF roms will be swapped for SecureBoot-enabled
ones. Requires SMM to be enabled. Defaults to
true
type: boolean
type: object
type: object
kernelBoot:
description: Settings to set the kernel for booting.
properties:
container:
description: Container defines the container that containes
kernel artifacts
properties:
image:
description: Image that contains initrd / kernel
files.
type: string
imagePullPolicy:
description: 'Image pull policy. One of Always,
Never, IfNotPresent. Defaults to Always if :latest
tag is specified, or IfNotPresent otherwise. Cannot
be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images'
type: string
imagePullSecret:
description: ImagePullSecret is the name of the
Docker registry secret required to pull the image.
The secret must already exist.
type: string
initrdPath:
description: the fully-qualified path to the ramdisk
image in the host OS
type: string
kernelPath:
description: The fully-qualified path to the kernel
image in the host OS
type: string
required:
- image
type: object
kernelArgs:
description: Arguments to be passed to the kernel at
boot time
type: string
type: object
serial:
description: The system-serial-number in SMBIOS
type: string
uuid:
description: UUID reported by the vmi bios. Defaults to
a random generated uid.
type: string
type: object
ioThreadsPolicy:
description: 'Controls whether or not disks will share IOThreads.
Omitting IOThreadsPolicy disables use of IOThreads. One of:
shared, auto'
type: string
launchSecurity:
description: Launch Security setting of the vmi.
properties:
sev:
description: AMD Secure Encrypted Virtualization (SEV).
properties:
attestation:
description: If specified, run the attestation process
for a vmi.
type: object
dhCert:
description: Base64 encoded guest owner's Diffie-Hellman
key.
type: string
policy:
description: 'Guest policy flags as defined in AMD SEV
API specification. Note: due to security reasons it
is not allowed to enable guest debugging. Therefore
NoDebug flag is not exposed to users and is always
true.'
properties:
encryptedState:
description: SEV-ES is required. Defaults to false.
type: boolean
type: object
session:
description: Base64 encoded session blob.
type: string
type: object
type: object
machine:
description: Machine type.
properties:
type:
description: QEMU machine type is the actual chipset of
the VirtualMachineInstance.
type: string
type: object
memory:
description: Memory allow specifying the VMI memory features.
properties:
guest:
anyOf:
- type: integer
- type: string
description: Guest allows to specifying the amount of memory
which is visible inside the Guest OS. The Guest must lie
between Requests and Limits from the resources section.
Defaults to the requested memory in the resources section
if not specified.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
hugepages:
description: Hugepages allow to use hugepages for the VirtualMachineInstance
instead of regular memory.
properties:
pageSize:
description: PageSize specifies the hugepage size, for
x86_64 architecture valid values are 1Gi and 2Mi.
type: string
type: object
maxGuest:
anyOf:
- type: integer
- type: string
description: MaxGuest allows to specify the maximum amount
of memory which is visible inside the Guest OS. The delta
between MaxGuest and Guest is the amount of memory that
can be hot(un)plugged.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
type: object
resources:
description: Resources describes the Compute Resources required
by this vmi.
properties:
limits:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: Limits describes the maximum amount of compute
resources allowed. Valid resource keys are "memory" and
"cpu".
type: object
overcommitGuestOverhead:
description: Don't ask the scheduler to take the guest-management
overhead into account. Instead put the overhead only into
the container's memory limit. This can lead to crashes
if all memory is in use on a node. Defaults to false.
type: boolean
requests:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: Requests is a description of the initial vmi
resources. Valid resource keys are "memory" and "cpu".
type: object
type: object
required:
- devices
type: object
evictionStrategy:
description: 'EvictionStrategy describes the strategy to follow
when a node drain occurs. The possible options are: - "None":
No action will be taken, according to the specified ''RunStrategy''
the VirtualMachine will be restarted or shutdown. - "LiveMigrate":
the VirtualMachineInstance will be migrated instead of being shutdown.
- "LiveMigrateIfPossible": the same as "LiveMigrate" but only
if the VirtualMachine is Live-Migratable, otherwise it will behave
as "None". - "External": the VirtualMachineInstance will be protected
by a PDB and ''vmi.Status.EvacuationNodeName'' will be set on
eviction. This is mainly useful for cluster-api-provider-kubevirt
(capk) which needs a way for VMI''s to be blocked from eviction,
yet signal capk that eviction has been called on the VMI so the
capk controller can handle tearing the VMI down. Details can be
found in the commit description https://github.com/kubevirt/kubevirt/commit/c1d77face705c8b126696bac9a3ee3825f27f1fa.'
type: string
hostname:
description: Specifies the hostname of the vmi If not specified,
the hostname will be set to the name of the vmi, if dhcp or cloud-init
is configured properly.
type: string
livenessProbe:
description: 'Periodic probe of VirtualMachineInstance liveness.
VirtualmachineInstances will be stopped if the probe fails. Cannot
be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
properties:
exec:
description: One and only one of the following should be specified.
Exec specifies the action to take, it will be executed on
the guest through the qemu-guest-agent. If the guest agent
is not available, this probe will fail.
properties:
command:
description: Command is the command line to execute inside
the container, the working directory for the command is
root ('/') in the container's filesystem. The command
is simply exec'd, it is not run inside a shell, so traditional
shell instructions ('|', etc) won't work. To use a shell,
you need to explicitly call out to that shell. Exit status
of 0 is treated as live/healthy and non-zero is unhealthy.
items:
type: string
type: array
type: object
failureThreshold:
description: Minimum consecutive failures for the probe to be
considered failed after having succeeded. Defaults to 3. Minimum
value is 1.
format: int32
type: integer
guestAgentPing:
description: GuestAgentPing contacts the qemu-guest-agent for
availability checks.
type: object
httpGet:
description: HTTPGet specifies the http request to perform.
properties:
host:
description: Host name to connect to, defaults to the pod
IP. You probably want to set "Host" in httpHeaders instead.
type: string
httpHeaders:
description: Custom headers to set in the request. HTTP
allows repeated headers.
items:
description: HTTPHeader describes a custom header to be
used in HTTP probes
properties:
name:
description: The header field name
type: string
value:
description: The header field value
type: string
required:
- name
- value
type: object
type: array
path:
description: Path to access on the HTTP server.
type: string
port:
anyOf:
- type: integer
- type: string
description: Name or number of the port to access on the
container. Number must be in the range 1 to 65535. Name
must be an IANA_SVC_NAME.
x-kubernetes-int-or-string: true
scheme:
description: Scheme to use for connecting to the host. Defaults
to HTTP.
type: string
required:
- port
type: object
initialDelaySeconds:
description: 'Number of seconds after the VirtualMachineInstance
has started before liveness probes are initiated. More info:
https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
format: int32
type: integer
periodSeconds:
description: How often (in seconds) to perform the probe. Default
to 10 seconds. Minimum value is 1.
format: int32
type: integer
successThreshold:
description: Minimum consecutive successes for the probe to
be considered successful after having failed. Defaults to
1. Must be 1 for liveness. Minimum value is 1.
format: int32
type: integer
tcpSocket:
description: 'TCPSocket specifies an action involving a TCP
port. TCP hooks not yet supported TODO: implement a realistic
TCP lifecycle hook'
properties:
host:
description: 'Optional: Host name to connect to, defaults
to the pod IP.'
type: string
port:
anyOf:
- type: integer
- type: string
description: Number or name of the port to access on the
container. Number must be in the range 1 to 65535. Name
must be an IANA_SVC_NAME.
x-kubernetes-int-or-string: true
required:
- port
type: object
timeoutSeconds:
description: 'Number of seconds after which the probe times
out. For exec probes the timeout fails the probe but does
not terminate the command running on the guest. This means
a blocking command can result in an increasing load on the
guest. A small buffer will be added to the resulting workload
exec probe to compensate for delays caused by the qemu guest
exec mechanism. Defaults to 1 second. Minimum value is 1.
More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
format: int32
type: integer
type: object
networks:
description: List of networks that can be attached to a vm's virtual
interface.
items:
description: Network represents a network type and a resource
that should be connected to the vm.
properties:
multus:
description: Represents the multus cni network.
properties:
default:
description: Select the default network and add it to
the multus-cni.io/default-network annotation.
type: boolean
networkName:
description: 'References to a NetworkAttachmentDefinition
CRD object. Format: <networkName>, <namespace>/<networkName>.
If namespace is not specified, VMI namespace is assumed.'
type: string
required:
- networkName
type: object
name:
description: 'Network name. Must be a DNS_LABEL and unique
within the vm. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names'
type: string
pod:
description: Represents the stock pod network interface.
properties:
vmIPv6NetworkCIDR:
description: IPv6 CIDR for the vm network. Defaults to
fd10:0:2::/120 if not specified.
type: string
vmNetworkCIDR:
description: CIDR for vm network. Default 10.0.2.0/24
if not specified.
type: string
type: object
required:
- name
type: object
type: array
nodeSelector:
additionalProperties:
type: string
description: 'NodeSelector is a selector which must be true for
the vmi to fit on a node. Selector which must match a node''s
labels for the vmi to be scheduled on that node. More info: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/'
type: object
priorityClassName:
description: If specified, indicates the pod's priority. If not
specified, the pod priority will be default or zero if there is
no default.
type: string
readinessProbe:
description: 'Periodic probe of VirtualMachineInstance service readiness.
VirtualmachineInstances will be removed from service endpoints
if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
properties:
exec:
description: One and only one of the following should be specified.
Exec specifies the action to take, it will be executed on
the guest through the qemu-guest-agent. If the guest agent
is not available, this probe will fail.
properties:
command:
description: Command is the command line to execute inside
the container, the working directory for the command is
root ('/') in the container's filesystem. The command
is simply exec'd, it is not run inside a shell, so traditional
shell instructions ('|', etc) won't work. To use a shell,
you need to explicitly call out to that shell. Exit status
of 0 is treated as live/healthy and non-zero is unhealthy.
items:
type: string
type: array
type: object
failureThreshold:
description: Minimum consecutive failures for the probe to be
considered failed after having succeeded. Defaults to 3. Minimum
value is 1.
format: int32
type: integer
guestAgentPing:
description: GuestAgentPing contacts the qemu-guest-agent for
availability checks.
type: object
httpGet:
description: HTTPGet specifies the http request to perform.
properties:
host:
description: Host name to connect to, defaults to the pod
IP. You probably want to set "Host" in httpHeaders instead.
type: string
httpHeaders:
description: Custom headers to set in the request. HTTP
allows repeated headers.
items:
description: HTTPHeader describes a custom header to be
used in HTTP probes
properties:
name:
description: The header field name
type: string
value:
description: The header field value
type: string
required:
- name
- value
type: object
type: array
path:
description: Path to access on the HTTP server.
type: string
port:
anyOf:
- type: integer
- type: string
description: Name or number of the port to access on the
container. Number must be in the range 1 to 65535. Name
must be an IANA_SVC_NAME.
x-kubernetes-int-or-string: true
scheme:
description: Scheme to use for connecting to the host. Defaults
to HTTP.
type: string
required:
- port
type: object
initialDelaySeconds:
description: 'Number of seconds after the VirtualMachineInstance
has started before liveness probes are initiated. More info:
https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
format: int32
type: integer
periodSeconds:
description: How often (in seconds) to perform the probe. Default
to 10 seconds. Minimum value is 1.
format: int32
type: integer
successThreshold:
description: Minimum consecutive successes for the probe to
be considered successful after having failed. Defaults to
1. Must be 1 for liveness. Minimum value is 1.
format: int32
type: integer
tcpSocket:
description: 'TCPSocket specifies an action involving a TCP
port. TCP hooks not yet supported TODO: implement a realistic
TCP lifecycle hook'
properties:
host:
description: 'Optional: Host name to connect to, defaults
to the pod IP.'
type: string
port:
anyOf:
- type: integer
- type: string
description: Number or name of the port to access on the
container. Number must be in the range 1 to 65535. Name
must be an IANA_SVC_NAME.
x-kubernetes-int-or-string: true
required:
- port
type: object
timeoutSeconds:
description: 'Number of seconds after which the probe times
out. For exec probes the timeout fails the probe but does
not terminate the command running on the guest. This means
a blocking command can result in an increasing load on the
guest. A small buffer will be added to the resulting workload
exec probe to compensate for delays caused by the qemu guest
exec mechanism. Defaults to 1 second. Minimum value is 1.
More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
format: int32
type: integer
type: object
schedulerName:
description: If specified, the VMI will be dispatched by specified
scheduler. If not specified, the VMI will be dispatched by default
scheduler.
type: string
startStrategy:
description: StartStrategy can be set to "Paused" if Virtual Machine
should be started in paused state.
type: string
subdomain:
description: If specified, the fully qualified vmi hostname will
be "<hostname>.<subdomain>.<pod namespace>.svc.<cluster domain>".
If not specified, the vmi will not have a domainname at all. The
DNS entry will resolve to the vmi, no matter if the vmi itself
can pick up a hostname.
type: string
terminationGracePeriodSeconds:
description: Grace period observed after signalling a VirtualMachineInstance
to stop after which the VirtualMachineInstance is force terminated.
format: int64
type: integer
tolerations:
description: If toleration is specified, obey all the toleration
rules.
items:
description: The pod this Toleration is attached to tolerates
any taint that matches the triple <key,value,effect> using the
matching operator <operator>.
properties:
effect:
description: Effect indicates the taint effect to match. Empty
means match all taint effects. When specified, allowed values
are NoSchedule, PreferNoSchedule and NoExecute.
type: string
key:
description: Key is the taint key that the toleration applies
to. Empty means match all taint keys. If the key is empty,
operator must be Exists; this combination means to match
all values and all keys.
type: string
operator:
description: Operator represents a key's relationship to the
value. Valid operators are Exists and Equal. Defaults to
Equal. Exists is equivalent to wildcard for value, so that
a pod can tolerate all taints of a particular category.
type: string
tolerationSeconds:
description: TolerationSeconds represents the period of time
the toleration (which must be of effect NoExecute, otherwise
this field is ignored) tolerates the taint. By default,
it is not set, which means tolerate the taint forever (do
not evict). Zero and negative values will be treated as
0 (evict immediately) by the system.
format: int64
type: integer
value:
description: Value is the taint value the toleration matches
to. If the operator is Exists, the value should be empty,
otherwise just a regular string.
type: string
type: object
type: array
topologySpreadConstraints:
description: TopologySpreadConstraints describes how a group of
VMIs will be spread across a given topology domains. K8s scheduler
will schedule VMI pods in a way which abides by the constraints.
items:
description: TopologySpreadConstraint specifies how to spread
matching pods among the given topology.
properties:
labelSelector:
description: LabelSelector is used to find matching pods.
Pods that match this label selector are counted to determine
the number of pods in their corresponding topology domain.
properties:
matchExpressions:
description: matchExpressions is a list of label selector
requirements. The requirements are ANDed.
items:
description: A label selector requirement is a selector
that contains values, a key, and an operator that
relates the key and values.
properties:
key:
description: key is the label key that the selector
applies to.
type: string
operator:
description: operator represents a key's relationship
to a set of values. Valid operators are In, NotIn,
Exists and DoesNotExist.
type: string
values:
description: values is an array of string values.
If the operator is In or NotIn, the values array
must be non-empty. If the operator is Exists or
DoesNotExist, the values array must be empty.
This array is replaced during a strategic merge
patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value} pairs.
A single {key,value} in the matchLabels map is equivalent
to an element of matchExpressions, whose key field is
"key", the operator is "In", and the values array contains
only "value". The requirements are ANDed.
type: object
type: object
matchLabelKeys:
description: MatchLabelKeys is a set of pod label keys to
select the pods over which spreading will be calculated.
The keys are used to lookup values from the incoming pod
labels, those key-value labels are ANDed with labelSelector
to select the group of existing pods over which spreading
will be calculated for the incoming pod. Keys that don't
exist in the incoming pod labels will be ignored. A null
or empty list means only match against labelSelector.
items:
type: string
type: array
x-kubernetes-list-type: atomic
maxSkew:
description: 'MaxSkew describes the degree to which pods may
be unevenly distributed. When ''whenUnsatisfiable=DoNotSchedule'',
it is the maximum permitted difference between the number
of matching pods in the target topology and the global minimum.
The global minimum is the minimum number of matching pods
in an eligible domain or zero if the number of eligible
domains is less than MinDomains. For example, in a 3-zone
cluster, MaxSkew is set to 1, and pods with the same labelSelector
spread as 2/2/1: In this case, the global minimum is 1.
| zone1 | zone2 | zone3 | | P P | P P | P | - if
MaxSkew is 1, incoming pod can only be scheduled to zone3
to become 2/2/2; scheduling it onto zone1(zone2) would make
the ActualSkew(3-1) on zone1(zone2) violate MaxSkew(1).
- if MaxSkew is 2, incoming pod can be scheduled onto any
zone. When ''whenUnsatisfiable=ScheduleAnyway'', it is used
to give higher precedence to topologies that satisfy it.
It''s a required field. Default value is 1 and 0 is not
allowed.'
format: int32
type: integer
minDomains:
description: "MinDomains indicates a minimum number of eligible
domains. When the number of eligible domains with matching
topology keys is less than minDomains, Pod Topology Spread
treats \"global minimum\" as 0, and then the calculation
of Skew is performed. And when the number of eligible domains
with matching topology keys equals or greater than minDomains,
this value has no effect on scheduling. As a result, when
the number of eligible domains is less than minDomains,
scheduler won't schedule more than maxSkew Pods to those
domains. If value is nil, the constraint behaves as if MinDomains
is equal to 1. Valid values are integers greater than 0.
When value is not nil, WhenUnsatisfiable must be DoNotSchedule.
\n For example, in a 3-zone cluster, MaxSkew is set to 2,
MinDomains is set to 5 and pods with the same labelSelector
spread as 2/2/2: | zone1 | zone2 | zone3 | | P P | P
P | P P | The number of domains is less than 5(MinDomains),
so \"global minimum\" is treated as 0. In this situation,
new pod with the same labelSelector cannot be scheduled,
because computed skew will be 3(3 - 0) if new Pod is scheduled
to any of the three zones, it will violate MaxSkew. \n This
is a beta field and requires the MinDomainsInPodTopologySpread
feature gate to be enabled (enabled by default)."
format: int32
type: integer
nodeAffinityPolicy:
description: "NodeAffinityPolicy indicates how we will treat
Pod's nodeAffinity/nodeSelector when calculating pod topology
spread skew. Options are: - Honor: only nodes matching nodeAffinity/nodeSelector
are included in the calculations. - Ignore: nodeAffinity/nodeSelector
are ignored. All nodes are included in the calculations.
\n If this value is nil, the behavior is equivalent to the
Honor policy. This is a beta-level feature default enabled
by the NodeInclusionPolicyInPodTopologySpread feature flag."
type: string
nodeTaintsPolicy:
description: "NodeTaintsPolicy indicates how we will treat
node taints when calculating pod topology spread skew. Options
are: - Honor: nodes without taints, along with tainted nodes
for which the incoming pod has a toleration, are included.
- Ignore: node taints are ignored. All nodes are included.
\n If this value is nil, the behavior is equivalent to the
Ignore policy. This is a beta-level feature default enabled
by the NodeInclusionPolicyInPodTopologySpread feature flag."
type: string
topologyKey:
description: TopologyKey is the key of node labels. Nodes
that have a label with this key and identical values are
considered to be in the same topology. We consider each
<key, value> as a "bucket", and try to put balanced number
of pods into each bucket. We define a domain as a particular
instance of a topology. Also, we define an eligible domain
as a domain whose nodes meet the requirements of nodeAffinityPolicy
and nodeTaintsPolicy. e.g. If TopologyKey is "kubernetes.io/hostname",
each Node is a domain of that topology. And, if TopologyKey
is "topology.kubernetes.io/zone", each zone is a domain
of that topology. It's a required field.
type: string
whenUnsatisfiable:
description: 'WhenUnsatisfiable indicates how to deal with
a pod if it doesn''t satisfy the spread constraint. - DoNotSchedule
(default) tells the scheduler not to schedule it. - ScheduleAnyway
tells the scheduler to schedule the pod in any location, but
giving higher precedence to topologies that would help reduce
the skew. A constraint is considered "Unsatisfiable" for
an incoming pod if and only if every possible node assignment
for that pod would violate "MaxSkew" on some topology. For
example, in a 3-zone cluster, MaxSkew is set to 1, and pods
with the same labelSelector spread as 3/1/1: | zone1 | zone2
| zone3 | | P P P | P | P | If WhenUnsatisfiable
is set to DoNotSchedule, incoming pod can only be scheduled
to zone2(zone3) to become 3/2/1(3/1/2) as ActualSkew(2-1)
on zone2(zone3) satisfies MaxSkew(1). In other words, the
cluster can still be imbalanced, but scheduler won''t make
it *more* imbalanced. It''s a required field.'
type: string
required:
- maxSkew
- topologyKey
- whenUnsatisfiable
type: object
type: array
x-kubernetes-list-map-keys:
- topologyKey
- whenUnsatisfiable
x-kubernetes-list-type: map
volumes:
description: List of volumes that can be mounted by disks belonging
to the vmi.
items:
description: Volume represents a named volume in a vmi.
properties:
cloudInitConfigDrive:
description: 'CloudInitConfigDrive represents a cloud-init
Config Drive user-data source. The Config Drive data will
be added as a disk to the vmi. A proper cloud-init installation
is required inside the guest. More info: https://cloudinit.readthedocs.io/en/latest/topics/datasources/configdrive.html'
properties:
networkData:
description: NetworkData contains config drive inline
cloud-init networkdata.
type: string
networkDataBase64:
description: NetworkDataBase64 contains config drive cloud-init
networkdata as a base64 encoded string.
type: string
networkDataSecretRef:
description: NetworkDataSecretRef references a k8s secret
that contains config drive networkdata.
properties:
name:
description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind,
uid?'
type: string
type: object
secretRef:
description: UserDataSecretRef references a k8s secret
that contains config drive userdata.
properties:
name:
description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind,
uid?'
type: string
type: object
userData:
description: UserData contains config drive inline cloud-init
userdata.
type: string
userDataBase64:
description: UserDataBase64 contains config drive cloud-init
userdata as a base64 encoded string.
type: string
type: object
cloudInitNoCloud:
description: 'CloudInitNoCloud represents a cloud-init NoCloud
user-data source. The NoCloud data will be added as a disk
to the vmi. A proper cloud-init installation is required
inside the guest. More info: http://cloudinit.readthedocs.io/en/latest/topics/datasources/nocloud.html'
properties:
networkData:
description: NetworkData contains NoCloud inline cloud-init
networkdata.
type: string
networkDataBase64:
description: NetworkDataBase64 contains NoCloud cloud-init
networkdata as a base64 encoded string.
type: string
networkDataSecretRef:
description: NetworkDataSecretRef references a k8s secret
that contains NoCloud networkdata.
properties:
name:
description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind,
uid?'
type: string
type: object
secretRef:
description: UserDataSecretRef references a k8s secret
that contains NoCloud userdata.
properties:
name:
description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind,
uid?'
type: string
type: object
userData:
description: UserData contains NoCloud inline cloud-init
userdata.
type: string
userDataBase64:
description: UserDataBase64 contains NoCloud cloud-init
userdata as a base64 encoded string.
type: string
type: object
configMap:
description: 'ConfigMapSource represents a reference to a
ConfigMap in the same namespace. More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-pod-configmap/'
properties:
name:
description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind, uid?'
type: string
optional:
description: Specify whether the ConfigMap or it's keys
must be defined
type: boolean
volumeLabel:
description: The volume label of the resulting disk inside
the VMI. Different bootstrapping mechanisms require
different values. Typical values are "cidata" (cloud-init),
"config-2" (cloud-init) or "OEMDRV" (kickstart).
type: string
type: object
containerDisk:
description: 'ContainerDisk references a docker image, embedding
a qcow or raw disk. More info: https://kubevirt.gitbooks.io/user-guide/registry-disk.html'
properties:
image:
description: Image is the name of the image with the embedded
disk.
type: string
imagePullPolicy:
description: 'Image pull policy. One of Always, Never,
IfNotPresent. Defaults to Always if :latest tag is specified,
or IfNotPresent otherwise. Cannot be updated. More info:
https://kubernetes.io/docs/concepts/containers/images#updating-images'
type: string
imagePullSecret:
description: ImagePullSecret is the name of the Docker
registry secret required to pull the image. The secret
must already exist.
type: string
path:
description: Path defines the path to disk file in the
container
type: string
required:
- image
type: object
dataVolume:
description: DataVolume represents the dynamic creation a
PVC for this volume as well as the process of populating
that PVC with a disk image.
properties:
hotpluggable:
description: Hotpluggable indicates whether the volume
can be hotplugged and hotunplugged.
type: boolean
name:
description: Name of both the DataVolume and the PVC in
the same namespace. After PVC population the DataVolume
is garbage collected by default.
type: string
required:
- name
type: object
downwardAPI:
description: DownwardAPI represents downward API about the
pod that should populate this volume
properties:
fields:
description: Fields is a list of downward API volume file
items:
description: DownwardAPIVolumeFile represents information
to create the file containing the pod field
properties:
fieldRef:
description: 'Required: Selects a field of the pod:
only annotations, labels, name and namespace are
supported.'
properties:
apiVersion:
description: Version of the schema the FieldPath
is written in terms of, defaults to "v1".
type: string
fieldPath:
description: Path of the field to select in
the specified API version.
type: string
required:
- fieldPath
type: object
mode:
description: 'Optional: mode bits used to set permissions
on this file, must be an octal value between 0000
and 0777 or a decimal value between 0 and 511.
YAML accepts both octal and decimal values, JSON
requires decimal values for mode bits. If not
specified, the volume defaultMode will be used.
This might be in conflict with other options that
affect the file mode, like fsGroup, and the result
can be other mode bits set.'
format: int32
type: integer
path:
description: 'Required: Path is the relative path
name of the file to be created. Must not be absolute
or contain the ''..'' path. Must be utf-8 encoded.
The first item of the relative path must not start
with ''..'''
type: string
resourceFieldRef:
description: 'Selects a resource of the container:
only resources limits and requests (limits.cpu,
limits.memory, requests.cpu and requests.memory)
are currently supported.'
properties:
containerName:
description: 'Container name: required for volumes,
optional for env vars'
type: string
divisor:
anyOf:
- type: integer
- type: string
description: Specifies the output format of
the exposed resources, defaults to "1"
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
resource:
description: 'Required: resource to select'
type: string
required:
- resource
type: object
required:
- path
type: object
type: array
volumeLabel:
description: The volume label of the resulting disk inside
the VMI. Different bootstrapping mechanisms require
different values. Typical values are "cidata" (cloud-init),
"config-2" (cloud-init) or "OEMDRV" (kickstart).
type: string
type: object
downwardMetrics:
description: DownwardMetrics adds a very small disk to VMIs
which contains a limited view of host and guest metrics.
The disk content is compatible with vhostmd (https://github.com/vhostmd/vhostmd)
and vm-dump-metrics.
type: object
emptyDisk:
description: 'EmptyDisk represents a temporary disk which
shares the vmis lifecycle. More info: https://kubevirt.gitbooks.io/user-guide/disks-and-volumes.html'
properties:
capacity:
anyOf:
- type: integer
- type: string
description: Capacity of the sparse disk.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
required:
- capacity
type: object
ephemeral:
description: Ephemeral is a special volume source that "wraps"
specified source and provides copy-on-write image on top
of it.
properties:
persistentVolumeClaim:
description: 'PersistentVolumeClaimVolumeSource represents
a reference to a PersistentVolumeClaim in the same namespace.
Directly attached to the vmi via qemu. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
properties:
claimName:
description: 'claimName is the name of a PersistentVolumeClaim
in the same namespace as the pod using this volume.
More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
type: string
readOnly:
description: readOnly Will force the ReadOnly setting
in VolumeMounts. Default false.
type: boolean
required:
- claimName
type: object
type: object
hostDisk:
description: HostDisk represents a disk created on the cluster
level
properties:
capacity:
anyOf:
- type: integer
- type: string
description: Capacity of the sparse disk
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
path:
description: The path to HostDisk image located on the
cluster
type: string
shared:
description: Shared indicate whether the path is shared
between nodes
type: boolean
type:
description: Contains information if disk.img exists or
should be created allowed options are 'Disk' and 'DiskOrCreate'
type: string
required:
- path
- type
type: object
memoryDump:
description: MemoryDump is attached to the virt launcher and
is populated with a memory dump of the vmi
properties:
claimName:
description: 'claimName is the name of a PersistentVolumeClaim
in the same namespace as the pod using this volume.
More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
type: string
hotpluggable:
description: Hotpluggable indicates whether the volume
can be hotplugged and hotunplugged.
type: boolean
readOnly:
description: readOnly Will force the ReadOnly setting
in VolumeMounts. Default false.
type: boolean
required:
- claimName
type: object
name:
description: 'Volume''s name. Must be a DNS_LABEL and unique
within the vmi. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names'
type: string
persistentVolumeClaim:
description: 'PersistentVolumeClaimVolumeSource represents
a reference to a PersistentVolumeClaim in the same namespace.
Directly attached to the vmi via qemu. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
properties:
claimName:
description: 'claimName is the name of a PersistentVolumeClaim
in the same namespace as the pod using this volume.
More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
type: string
hotpluggable:
description: Hotpluggable indicates whether the volume
can be hotplugged and hotunplugged.
type: boolean
readOnly:
description: readOnly Will force the ReadOnly setting
in VolumeMounts. Default false.
type: boolean
required:
- claimName
type: object
secret:
description: 'SecretVolumeSource represents a reference to
a secret data in the same namespace. More info: https://kubernetes.io/docs/concepts/configuration/secret/'
properties:
optional:
description: Specify whether the Secret or it's keys must
be defined
type: boolean
secretName:
description: 'Name of the secret in the pod''s namespace
to use. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret'
type: string
volumeLabel:
description: The volume label of the resulting disk inside
the VMI. Different bootstrapping mechanisms require
different values. Typical values are "cidata" (cloud-init),
"config-2" (cloud-init) or "OEMDRV" (kickstart).
type: string
type: object
serviceAccount:
description: 'ServiceAccountVolumeSource represents a reference
to a service account. There can only be one volume of this
type! More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/'
properties:
serviceAccountName:
description: 'Name of the service account in the pod''s
namespace to use. More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/'
type: string
type: object
sysprep:
description: Represents a Sysprep volume source.
properties:
configMap:
description: ConfigMap references a ConfigMap that contains
Sysprep answer file named autounattend.xml that should
be attached as disk of CDROM type.
properties:
name:
description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind,
uid?'
type: string
type: object
secret:
description: Secret references a k8s Secret that contains
Sysprep answer file named autounattend.xml that should
be attached as disk of CDROM type.
properties:
name:
description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind,
uid?'
type: string
type: object
type: object
required:
- name
type: object
type: array
required:
- domain
type: object
type: object
required:
- selector
- template
type: object
status:
description: Status is the high level overview of how the VirtualMachineInstance
is doing. It contains information available to controllers and users.
nullable: true
properties:
conditions:
items:
properties:
lastProbeTime:
format: date-time
nullable: true
type: string
lastTransitionTime:
format: date-time
nullable: true
type: string
message:
type: string
reason:
type: string
status:
type: string
type:
type: string
required:
- status
- type
type: object
type: array
labelSelector:
description: Canonical form of the label selector for HPA which consumes
it through the scale subresource.
type: string
readyReplicas:
description: The number of ready replicas for this replica set.
format: int32
type: integer
replicas:
description: Total number of non-terminated pods targeted by this deployment
(their labels match the selector).
format: int32
type: integer
type: object
required:
- spec
type: object
`,
"virtualmachineinstancetype": `openAPIV3Schema:
description: VirtualMachineInstancetype resource contains quantitative and resource
related VirtualMachine configuration that can be used by multiple VirtualMachine
resources.
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest internal
value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this object
represents. Servers may infer this from the endpoint the client submits requests
to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: Required spec describing the instancetype
properties:
annotations:
additionalProperties:
type: string
description: Optionally defines the required Annotations to be used by the
instance type and applied to the VirtualMachineInstance
type: object
cpu:
description: Required CPU related attributes of the instancetype.
properties:
dedicatedCPUPlacement:
description: DedicatedCPUPlacement requests the scheduler to place the
VirtualMachineInstance on a node with enough dedicated pCPUs and pin
the vCPUs to it.
type: boolean
guest:
description: "Required number of vCPUs to expose to the guest. \n The
resulting CPU topology being derived from the optional PreferredCPUTopology
attribute of CPUPreferences that itself defaults to PreferSockets."
format: int32
type: integer
isolateEmulatorThread:
description: IsolateEmulatorThread requests one more dedicated pCPU
to be allocated for the VMI to place the emulator thread on it.
type: boolean
model:
description: Model specifies the CPU model inside the VMI. List of available
models https://github.com/libvirt/libvirt/tree/master/src/cpu_map.
It is possible to specify special cases like "host-passthrough" to
get the same CPU as the node and "host-model" to get CPU closest to
the node one. Defaults to host-model.
type: string
numa:
description: NUMA allows specifying settings for the guest NUMA topology
properties:
guestMappingPassthrough:
description: GuestMappingPassthrough will create an efficient guest
topology based on host CPUs exclusively assigned to a pod. The
created topology ensures that memory and CPUs on the virtual numa
nodes never cross boundaries of host numa nodes.
type: object
type: object
realtime:
description: Realtime instructs the virt-launcher to tune the VMI for
lower latency, optional for real time workloads
properties:
mask:
description: 'Mask defines the vcpu mask expression that defines
which vcpus are used for realtime. Format matches libvirt''s expressions.
Example: "0-3,^1","0,2,3","2-3"'
type: string
type: object
required:
- guest
type: object
gpus:
description: Optionally defines any GPU devices associated with the instancetype.
items:
properties:
deviceName:
type: string
name:
description: Name of the GPU device as exposed by a device plugin
type: string
tag:
description: If specified, the virtual network interface address and
its tag will be provided to the guest via config drive
type: string
virtualGPUOptions:
properties:
display:
properties:
enabled:
description: Enabled determines if a display addapter backed
by a vGPU should be enabled or disabled on the guest. Defaults
to true.
type: boolean
ramFB:
description: Enables a boot framebuffer, until the guest OS
loads a real GPU driver Defaults to true.
properties:
enabled:
description: Enabled determines if the feature should
be enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
type: object
type: object
required:
- deviceName
- name
type: object
type: array
x-kubernetes-list-type: atomic
hostDevices:
description: Optionally defines any HostDevices associated with the instancetype.
items:
properties:
deviceName:
description: DeviceName is the resource name of the host device exposed
by a device plugin
type: string
name:
type: string
tag:
description: If specified, the virtual network interface address and
its tag will be provided to the guest via config drive
type: string
required:
- deviceName
- name
type: object
type: array
x-kubernetes-list-type: atomic
ioThreadsPolicy:
description: Optionally defines the IOThreadsPolicy to be used by the instancetype.
type: string
launchSecurity:
description: Optionally defines the LaunchSecurity to be used by the instancetype.
properties:
sev:
description: AMD Secure Encrypted Virtualization (SEV).
properties:
attestation:
description: If specified, run the attestation process for a vmi.
type: object
dhCert:
description: Base64 encoded guest owner's Diffie-Hellman key.
type: string
policy:
description: 'Guest policy flags as defined in AMD SEV API specification.
Note: due to security reasons it is not allowed to enable guest
debugging. Therefore NoDebug flag is not exposed to users and
is always true.'
properties:
encryptedState:
description: SEV-ES is required. Defaults to false.
type: boolean
type: object
session:
description: Base64 encoded session blob.
type: string
type: object
type: object
memory:
description: Required Memory related attributes of the instancetype.
properties:
guest:
anyOf:
- type: integer
- type: string
description: Required amount of memory which is visible inside the guest
OS.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
hugepages:
description: Optionally enables the use of hugepages for the VirtualMachineInstance
instead of regular memory.
properties:
pageSize:
description: PageSize specifies the hugepage size, for x86_64 architecture
valid values are 1Gi and 2Mi.
type: string
type: object
overcommitPercent:
description: OvercommitPercent is the percentage of the guest memory
which will be overcommitted. This means that the VMIs parent pod (virt-launcher)
will request less physical memory by a factor specified by the OvercommitPercent.
Overcommits can lead to memory exhaustion, which in turn can lead
to crashes. Use carefully. Defaults to 0
maximum: 100
minimum: 0
type: integer
required:
- guest
type: object
nodeSelector:
additionalProperties:
type: string
description: "NodeSelector is a selector which must be true for the vmi
to fit on a node. Selector which must match a node's labels for the vmi
to be scheduled on that node. More info: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/
\n NodeSelector is the name of the custom node selector for the instancetype."
type: object
schedulerName:
description: "If specified, the VMI will be dispatched by specified scheduler.
If not specified, the VMI will be dispatched by default scheduler. \n
SchedulerName is the name of the custom K8s scheduler for the instancetype."
type: string
required:
- cpu
- memory
type: object
required:
- spec
type: object
`,
"virtualmachinepool": `openAPIV3Schema:
description: VirtualMachinePool resource contains a VirtualMachine configuration
that can be used to replicate multiple VirtualMachine resources.
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest internal
value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this object
represents. Servers may infer this from the endpoint the client submits requests
to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
properties:
paused:
description: Indicates that the pool is paused.
type: boolean
replicas:
description: Number of desired pods. This is a pointer to distinguish between
explicit zero and not specified. Defaults to 1.
format: int32
type: integer
selector:
description: Label selector for pods. Existing Poolss whose pods are selected
by this will be the ones affected by this deployment.
properties:
matchExpressions:
description: matchExpressions is a list of label selector requirements.
The requirements are ANDed.
items:
description: A label selector requirement is a selector that contains
values, a key, and an operator that relates the key and values.
properties:
key:
description: key is the label key that the selector applies to.
type: string
operator:
description: operator represents a key's relationship to a set
of values. Valid operators are In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string values. If the operator
is In or NotIn, the values array must be non-empty. If the operator
is Exists or DoesNotExist, the values array must be empty. This
array is replaced during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value} pairs. A single {key,value}
in the matchLabels map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is "In", and the values array
contains only "value". The requirements are ANDed.
type: object
type: object
virtualMachineTemplate:
description: Template describes the VM that will be created.
properties:
metadata:
nullable: true
type: object
x-kubernetes-preserve-unknown-fields: true
spec:
description: VirtualMachineSpec contains the VirtualMachine specification.
properties:
dataVolumeTemplates:
description: dataVolumeTemplates is a list of dataVolumes that the
VirtualMachineInstance template can reference. DataVolumes in
this list are dynamically created for the VirtualMachine and are
tied to the VirtualMachine's life-cycle.
items:
nullable: true
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this
representation of an object. Servers should convert recognized
schemas to the latest internal value, and may reject unrecognized
values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST
resource this object represents. Servers may infer this
from the endpoint the client submits requests to. Cannot
be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
nullable: true
type: object
x-kubernetes-preserve-unknown-fields: true
spec:
description: DataVolumeSpec contains the DataVolume specification.
properties:
checkpoints:
description: Checkpoints is a list of DataVolumeCheckpoints,
representing stages in a multistage import.
items:
description: DataVolumeCheckpoint defines a stage in
a warm migration.
properties:
current:
description: Current is the identifier of the snapshot
created for this checkpoint.
type: string
previous:
description: Previous is the identifier of the snapshot
from the previous checkpoint.
type: string
required:
- current
- previous
type: object
type: array
contentType:
description: 'DataVolumeContentType options: "kubevirt",
"archive"'
enum:
- kubevirt
- archive
type: string
finalCheckpoint:
description: FinalCheckpoint indicates whether the current
DataVolumeCheckpoint is the final checkpoint.
type: boolean
preallocation:
description: Preallocation controls whether storage for
DataVolumes should be allocated in advance.
type: boolean
priorityClassName:
description: PriorityClassName for Importer, Cloner and
Uploader pod
type: string
pvc:
description: PVC is the PVC specification
properties:
accessModes:
description: 'accessModes contains the desired access
modes the volume should have. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1'
items:
type: string
type: array
dataSource:
description: 'dataSource field can be used to specify
either: * An existing VolumeSnapshot object (snapshot.storage.k8s.io/VolumeSnapshot)
* An existing PVC (PersistentVolumeClaim) If the
provisioner or an external controller can support
the specified data source, it will create a new
volume based on the contents of the specified data
source. When the AnyVolumeDataSource feature gate
is enabled, dataSource contents will be copied to
dataSourceRef, and dataSourceRef contents will be
copied to dataSource when dataSourceRef.namespace
is not specified. If the namespace is specified,
then dataSourceRef will not be copied to dataSource.'
properties:
apiGroup:
description: APIGroup is the group for the resource
being referenced. If APIGroup is not specified,
the specified Kind must be in the core API group.
For any other third-party types, APIGroup is
required.
type: string
kind:
description: Kind is the type of resource being
referenced
type: string
name:
description: Name is the name of resource being
referenced
type: string
required:
- kind
- name
type: object
dataSourceRef:
description: 'dataSourceRef specifies the object from
which to populate the volume with data, if a non-empty
volume is desired. This may be any object from a
non-empty API group (non core object) or a PersistentVolumeClaim
object. When this field is specified, volume binding
will only succeed if the type of the specified object
matches some installed volume populator or dynamic
provisioner. This field will replace the functionality
of the dataSource field and as such if both fields
are non-empty, they must have the same value. For
backwards compatibility, when namespace isn''t specified
in dataSourceRef, both fields (dataSource and dataSourceRef)
will be set to the same value automatically if one
of them is empty and the other is non-empty. When
namespace is specified in dataSourceRef, dataSource
isn''t set to the same value and must be empty.
There are three important differences between dataSource
and dataSourceRef: * While dataSource only allows
two specific types of objects, dataSourceRef allows
any non-core object, as well as PersistentVolumeClaim
objects. * While dataSource ignores disallowed values
(dropping them), dataSourceRef preserves all values,
and generates an error if a disallowed value is specified.
* While dataSource only allows local objects, dataSourceRef
allows objects in any namespaces. (Beta) Using
this field requires the AnyVolumeDataSource feature
gate to be enabled. (Alpha) Using the namespace
field of dataSourceRef requires the CrossNamespaceVolumeDataSource
feature gate to be enabled.'
properties:
apiGroup:
description: APIGroup is the group for the resource
being referenced. If APIGroup is not specified,
the specified Kind must be in the core API group.
For any other third-party types, APIGroup is
required.
type: string
kind:
description: Kind is the type of resource being
referenced
type: string
name:
description: Name is the name of resource being
referenced
type: string
namespace:
description: Namespace is the namespace of resource
being referenced Note that when a namespace
is specified, a gateway.networking.k8s.io/ReferenceGrant
object is required in the referent namespace
to allow that namespace's owner to accept the
reference. See the ReferenceGrant documentation
for details. (Alpha) This field requires the
CrossNamespaceVolumeDataSource feature gate
to be enabled.
type: string
required:
- kind
- name
type: object
resources:
description: 'resources represents the minimum resources
the volume should have. If RecoverVolumeExpansionFailure
feature is enabled users are allowed to specify
resource requirements that are lower than previous
value but must still be higher than capacity recorded
in the status field of the claim. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources'
properties:
claims:
description: "Claims lists the names of resources,
defined in spec.resourceClaims, that are used
by this container. \n This is an alpha field
and requires enabling the DynamicResourceAllocation
feature gate. \n This field is immutable. It
can only be set for containers."
items:
description: ResourceClaim references one entry
in PodSpec.ResourceClaims.
properties:
name:
description: Name must match the name of
one entry in pod.spec.resourceClaims of
the Pod where this field is used. It makes
that resource available inside a container.
type: string
required:
- name
type: object
type: array
x-kubernetes-list-map-keys:
- name
x-kubernetes-list-type: map
limits:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: 'Limits describes the maximum amount
of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
type: object
requests:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: 'Requests describes the minimum amount
of compute resources required. If Requests is
omitted for a container, it defaults to Limits
if that is explicitly specified, otherwise to
an implementation-defined value. More info:
https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
type: object
type: object
selector:
description: selector is a label query over volumes
to consider for binding.
properties:
matchExpressions:
description: matchExpressions is a list of label
selector requirements. The requirements are
ANDed.
items:
description: A label selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: key is the label key that the
selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty. If
the operator is Exists or DoesNotExist,
the values array must be empty. This array
is replaced during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is "In",
and the values array contains only "value".
The requirements are ANDed.
type: object
type: object
storageClassName:
description: 'storageClassName is the name of the
StorageClass required by the claim. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#class-1'
type: string
volumeMode:
description: volumeMode defines what type of volume
is required by the claim. Value of Filesystem is
implied when not included in claim spec.
type: string
volumeName:
description: volumeName is the binding reference to
the PersistentVolume backing this claim.
type: string
type: object
source:
description: Source is the src of the data for the requested
DataVolume
properties:
blank:
description: DataVolumeBlankImage provides the parameters
to create a new raw blank image for the PVC
type: object
gcs:
description: DataVolumeSourceGCS provides the parameters
to create a Data Volume from an GCS source
properties:
secretRef:
description: SecretRef provides the secret reference
needed to access the GCS source
type: string
url:
description: URL is the url of the GCS source
type: string
required:
- url
type: object
http:
description: DataVolumeSourceHTTP can be either an
http or https endpoint, with an optional basic auth
user name and password, and an optional configmap
containing additional CAs
properties:
certConfigMap:
description: CertConfigMap is a configmap reference,
containing a Certificate Authority(CA) public
key, and a base64 encoded pem certificate
type: string
extraHeaders:
description: ExtraHeaders is a list of strings
containing extra headers to include with HTTP
transfer requests
items:
type: string
type: array
secretExtraHeaders:
description: SecretExtraHeaders is a list of Secret
references, each containing an extra HTTP header
that may include sensitive information
items:
type: string
type: array
secretRef:
description: SecretRef A Secret reference, the
secret should contain accessKeyId (user name)
base64 encoded, and secretKey (password) also
base64 encoded
type: string
url:
description: URL is the URL of the http(s) endpoint
type: string
required:
- url
type: object
imageio:
description: DataVolumeSourceImageIO provides the
parameters to create a Data Volume from an imageio
source
properties:
certConfigMap:
description: CertConfigMap provides a reference
to the CA cert
type: string
diskId:
description: DiskID provides id of a disk to be
imported
type: string
secretRef:
description: SecretRef provides the secret reference
needed to access the ovirt-engine
type: string
url:
description: URL is the URL of the ovirt-engine
type: string
required:
- diskId
- url
type: object
pvc:
description: DataVolumeSourcePVC provides the parameters
to create a Data Volume from an existing PVC
properties:
name:
description: The name of the source PVC
type: string
namespace:
description: The namespace of the source PVC
type: string
required:
- name
- namespace
type: object
registry:
description: DataVolumeSourceRegistry provides the
parameters to create a Data Volume from an registry
source
properties:
certConfigMap:
description: CertConfigMap provides a reference
to the Registry certs
type: string
imageStream:
description: ImageStream is the name of image
stream for import
type: string
pullMethod:
description: PullMethod can be either "pod" (default
import), or "node" (node docker cache based
import)
type: string
secretRef:
description: SecretRef provides the secret reference
needed to access the Registry source
type: string
url:
description: 'URL is the url of the registry source
(starting with the scheme: docker, oci-archive)'
type: string
type: object
s3:
description: DataVolumeSourceS3 provides the parameters
to create a Data Volume from an S3 source
properties:
certConfigMap:
description: CertConfigMap is a configmap reference,
containing a Certificate Authority(CA) public
key, and a base64 encoded pem certificate
type: string
secretRef:
description: SecretRef provides the secret reference
needed to access the S3 source
type: string
url:
description: URL is the url of the S3 source
type: string
required:
- url
type: object
snapshot:
description: DataVolumeSourceSnapshot provides the
parameters to create a Data Volume from an existing
VolumeSnapshot
properties:
name:
description: The name of the source VolumeSnapshot
type: string
namespace:
description: The namespace of the source VolumeSnapshot
type: string
required:
- name
- namespace
type: object
upload:
description: DataVolumeSourceUpload provides the parameters
to create a Data Volume by uploading the source
type: object
vddk:
description: DataVolumeSourceVDDK provides the parameters
to create a Data Volume from a Vmware source
properties:
backingFile:
description: BackingFile is the path to the virtual
hard disk to migrate from vCenter/ESXi
type: string
initImageURL:
description: InitImageURL is an optional URL to
an image containing an extracted VDDK library,
overrides v2v-vmware config map
type: string
secretRef:
description: SecretRef provides a reference to
a secret containing the username and password
needed to access the vCenter or ESXi host
type: string
thumbprint:
description: Thumbprint is the certificate thumbprint
of the vCenter or ESXi host
type: string
url:
description: URL is the URL of the vCenter or
ESXi host with the VM to migrate
type: string
uuid:
description: UUID is the UUID of the virtual machine
that the backing file is attached to in vCenter/ESXi
type: string
type: object
type: object
sourceRef:
description: SourceRef is an indirect reference to the
source of data for the requested DataVolume
properties:
kind:
description: The kind of the source reference, currently
only "DataSource" is supported
type: string
name:
description: The name of the source reference
type: string
namespace:
description: The namespace of the source reference,
defaults to the DataVolume namespace
type: string
required:
- kind
- name
type: object
storage:
description: Storage is the requested storage specification
properties:
accessModes:
description: 'AccessModes contains the desired access
modes the volume should have. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1'
items:
type: string
type: array
dataSource:
description: 'This field can be used to specify either:
* An existing VolumeSnapshot object (snapshot.storage.k8s.io/VolumeSnapshot)
* An existing PVC (PersistentVolumeClaim) * An existing
custom resource that implements data population
(Alpha) In order to use custom resource types that
implement data population, the AnyVolumeDataSource
feature gate must be enabled. If the provisioner
or an external controller can support the specified
data source, it will create a new volume based on
the contents of the specified data source. If the
AnyVolumeDataSource feature gate is enabled, this
field will always have the same contents as the
DataSourceRef field.'
properties:
apiGroup:
description: APIGroup is the group for the resource
being referenced. If APIGroup is not specified,
the specified Kind must be in the core API group.
For any other third-party types, APIGroup is
required.
type: string
kind:
description: Kind is the type of resource being
referenced
type: string
name:
description: Name is the name of resource being
referenced
type: string
required:
- kind
- name
type: object
dataSourceRef:
description: 'Specifies the object from which to populate
the volume with data, if a non-empty volume is desired.
This may be any local object from a non-empty API
group (non core object) or a PersistentVolumeClaim
object. When this field is specified, volume binding
will only succeed if the type of the specified object
matches some installed volume populator or dynamic
provisioner. This field will replace the functionality
of the DataSource field and as such if both fields
are non-empty, they must have the same value. For
backwards compatibility, both fields (DataSource
and DataSourceRef) will be set to the same value
automatically if one of them is empty and the other
is non-empty. There are two important differences
between DataSource and DataSourceRef: * While DataSource
only allows two specific types of objects, DataSourceRef
allows any non-core object, as well as PersistentVolumeClaim
objects. * While DataSource ignores disallowed values
(dropping them), DataSourceRef preserves all values,
and generates an error if a disallowed value is
specified. (Beta) Using this field requires the
AnyVolumeDataSource feature gate to be enabled.'
properties:
apiGroup:
description: APIGroup is the group for the resource
being referenced. If APIGroup is not specified,
the specified Kind must be in the core API group.
For any other third-party types, APIGroup is
required.
type: string
kind:
description: Kind is the type of resource being
referenced
type: string
name:
description: Name is the name of resource being
referenced
type: string
namespace:
description: Namespace is the namespace of resource
being referenced Note that when a namespace
is specified, a gateway.networking.k8s.io/ReferenceGrant
object is required in the referent namespace
to allow that namespace's owner to accept the
reference. See the ReferenceGrant documentation
for details. (Alpha) This field requires the
CrossNamespaceVolumeDataSource feature gate
to be enabled.
type: string
required:
- kind
- name
type: object
resources:
description: 'Resources represents the minimum resources
the volume should have. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources'
properties:
claims:
description: "Claims lists the names of resources,
defined in spec.resourceClaims, that are used
by this container. \n This is an alpha field
and requires enabling the DynamicResourceAllocation
feature gate. \n This field is immutable. It
can only be set for containers."
items:
description: ResourceClaim references one entry
in PodSpec.ResourceClaims.
properties:
name:
description: Name must match the name of
one entry in pod.spec.resourceClaims of
the Pod where this field is used. It makes
that resource available inside a container.
type: string
required:
- name
type: object
type: array
x-kubernetes-list-map-keys:
- name
x-kubernetes-list-type: map
limits:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: 'Limits describes the maximum amount
of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
type: object
requests:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: 'Requests describes the minimum amount
of compute resources required. If Requests is
omitted for a container, it defaults to Limits
if that is explicitly specified, otherwise to
an implementation-defined value. More info:
https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
type: object
type: object
selector:
description: A label query over volumes to consider
for binding.
properties:
matchExpressions:
description: matchExpressions is a list of label
selector requirements. The requirements are
ANDed.
items:
description: A label selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: key is the label key that the
selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty. If
the operator is Exists or DoesNotExist,
the values array must be empty. This array
is replaced during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is "In",
and the values array contains only "value".
The requirements are ANDed.
type: object
type: object
storageClassName:
description: 'Name of the StorageClass required by
the claim. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#class-1'
type: string
volumeMode:
description: volumeMode defines what type of volume
is required by the claim. Value of Filesystem is
implied when not included in claim spec.
type: string
volumeName:
description: VolumeName is the binding reference to
the PersistentVolume backing this claim.
type: string
type: object
type: object
status:
description: DataVolumeTemplateDummyStatus is here simply
for backwards compatibility with a previous API.
nullable: true
type: object
required:
- spec
type: object
type: array
instancetype:
description: InstancetypeMatcher references a instancetype that
is used to fill fields in Template
properties:
inferFromVolume:
description: InferFromVolume lists the name of a volume that
should be used to infer or discover the instancetype to be
used through known annotations on the underlying resource.
Once applied to the InstancetypeMatcher this field is removed.
type: string
inferFromVolumeFailurePolicy:
description: 'InferFromVolumeFailurePolicy controls what should
happen on failure when inferring the instancetype. Allowed
values are: "RejectInferFromVolumeFailure" and "IgnoreInferFromVolumeFailure".
If not specified, "RejectInferFromVolumeFailure" is used by
default.'
type: string
kind:
description: 'Kind specifies which instancetype resource is
referenced. Allowed values are: "VirtualMachineInstancetype"
and "VirtualMachineClusterInstancetype". If not specified,
"VirtualMachineClusterInstancetype" is used by default.'
type: string
name:
description: Name is the name of the VirtualMachineInstancetype
or VirtualMachineClusterInstancetype
type: string
revisionName:
description: RevisionName specifies a ControllerRevision containing
a specific copy of the VirtualMachineInstancetype or VirtualMachineClusterInstancetype
to be used. This is initially captured the first time the
instancetype is applied to the VirtualMachineInstance.
type: string
type: object
preference:
description: PreferenceMatcher references a set of preference that
is used to fill fields in Template
properties:
inferFromVolume:
description: InferFromVolume lists the name of a volume that
should be used to infer or discover the preference to be used
through known annotations on the underlying resource. Once
applied to the PreferenceMatcher this field is removed.
type: string
inferFromVolumeFailurePolicy:
description: 'InferFromVolumeFailurePolicy controls what should
happen on failure when preference the instancetype. Allowed
values are: "RejectInferFromVolumeFailure" and "IgnoreInferFromVolumeFailure".
If not specified, "RejectInferFromVolumeFailure" is used by
default.'
type: string
kind:
description: 'Kind specifies which preference resource is referenced.
Allowed values are: "VirtualMachinePreference" and "VirtualMachineClusterPreference".
If not specified, "VirtualMachineClusterPreference" is used
by default.'
type: string
name:
description: Name is the name of the VirtualMachinePreference
or VirtualMachineClusterPreference
type: string
revisionName:
description: RevisionName specifies a ControllerRevision containing
a specific copy of the VirtualMachinePreference or VirtualMachineClusterPreference
to be used. This is initially captured the first time the
instancetype is applied to the VirtualMachineInstance.
type: string
type: object
runStrategy:
description: Running state indicates the requested running state
of the VirtualMachineInstance mutually exclusive with Running
type: string
running:
description: Running controls whether the associatied VirtualMachineInstance
is created or not Mutually exclusive with RunStrategy
type: boolean
template:
description: Template is the direct specification of VirtualMachineInstance
properties:
metadata:
nullable: true
type: object
x-kubernetes-preserve-unknown-fields: true
spec:
description: VirtualMachineInstance Spec contains the VirtualMachineInstance
specification.
properties:
accessCredentials:
description: Specifies a set of public keys to inject into
the vm guest
items:
description: AccessCredential represents a credential
source that can be used to authorize remote access to
the vm guest Only one of its members may be specified.
properties:
sshPublicKey:
description: SSHPublicKey represents the source and
method of applying a ssh public key into a guest
virtual machine.
properties:
propagationMethod:
description: PropagationMethod represents how
the public key is injected into the vm guest.
properties:
configDrive:
description: ConfigDrivePropagation means
that the ssh public keys are injected into
the VM using metadata using the configDrive
cloud-init provider
type: object
noCloud:
description: NoCloudPropagation means that
the ssh public keys are injected into the
VM using metadata using the noCloud cloud-init
provider
type: object
qemuGuestAgent:
description: QemuGuestAgentAccessCredentailPropagation
means ssh public keys are dynamically injected
into the vm at runtime via the qemu guest
agent. This feature requires the qemu guest
agent to be running within the guest.
properties:
users:
description: Users represents a list of
guest users that should have the ssh
public keys added to their authorized_keys
file.
items:
type: string
type: array
x-kubernetes-list-type: set
required:
- users
type: object
type: object
source:
description: Source represents where the public
keys are pulled from
properties:
secret:
description: Secret means that the access
credential is pulled from a kubernetes secret
properties:
secretName:
description: SecretName represents the
name of the secret in the VMI's namespace
type: string
required:
- secretName
type: object
type: object
required:
- propagationMethod
- source
type: object
userPassword:
description: UserPassword represents the source and
method for applying a guest user's password
properties:
propagationMethod:
description: propagationMethod represents how
the user passwords are injected into the vm
guest.
properties:
qemuGuestAgent:
description: QemuGuestAgentAccessCredentailPropagation
means passwords are dynamically injected
into the vm at runtime via the qemu guest
agent. This feature requires the qemu guest
agent to be running within the guest.
type: object
type: object
source:
description: Source represents where the user
passwords are pulled from
properties:
secret:
description: Secret means that the access
credential is pulled from a kubernetes secret
properties:
secretName:
description: SecretName represents the
name of the secret in the VMI's namespace
type: string
required:
- secretName
type: object
type: object
required:
- propagationMethod
- source
type: object
type: object
type: array
x-kubernetes-list-type: atomic
affinity:
description: If affinity is specifies, obey all the affinity
rules
properties:
nodeAffinity:
description: Describes node affinity scheduling rules
for the pod.
properties:
preferredDuringSchedulingIgnoredDuringExecution:
description: The scheduler will prefer to schedule
pods to nodes that satisfy the affinity expressions
specified by this field, but it may choose a node
that violates one or more of the expressions.
The node that is most preferred is the one with
the greatest sum of weights, i.e. for each node
that meets all of the scheduling requirements
(resource request, requiredDuringScheduling affinity
expressions, etc.), compute a sum by iterating
through the elements of this field and adding
"weight" to the sum if the node matches the corresponding
matchExpressions; the node(s) with the highest
sum are the most preferred.
items:
description: An empty preferred scheduling term
matches all objects with implicit weight 0 (i.e.
it's a no-op). A null preferred scheduling term
matches no objects (i.e. is also a no-op).
properties:
preference:
description: A node selector term, associated
with the corresponding weight.
properties:
matchExpressions:
description: A list of node selector requirements
by node's labels.
items:
description: A node selector requirement
is a selector that contains values,
a key, and an operator that relates
the key and values.
properties:
key:
description: The label key that
the selector applies to.
type: string
operator:
description: Represents a key's
relationship to a set of values.
Valid operators are In, NotIn,
Exists, DoesNotExist. Gt, and
Lt.
type: string
values:
description: An array of string
values. If the operator is In
or NotIn, the values array must
be non-empty. If the operator
is Exists or DoesNotExist, the
values array must be empty. If
the operator is Gt or Lt, the
values array must have a single
element, which will be interpreted
as an integer. This array is replaced
during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchFields:
description: A list of node selector requirements
by node's fields.
items:
description: A node selector requirement
is a selector that contains values,
a key, and an operator that relates
the key and values.
properties:
key:
description: The label key that
the selector applies to.
type: string
operator:
description: Represents a key's
relationship to a set of values.
Valid operators are In, NotIn,
Exists, DoesNotExist. Gt, and
Lt.
type: string
values:
description: An array of string
values. If the operator is In
or NotIn, the values array must
be non-empty. If the operator
is Exists or DoesNotExist, the
values array must be empty. If
the operator is Gt or Lt, the
values array must have a single
element, which will be interpreted
as an integer. This array is replaced
during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
type: object
weight:
description: Weight associated with matching
the corresponding nodeSelectorTerm, in the
range 1-100.
format: int32
type: integer
required:
- preference
- weight
type: object
type: array
requiredDuringSchedulingIgnoredDuringExecution:
description: If the affinity requirements specified
by this field are not met at scheduling time,
the pod will not be scheduled onto the node. If
the affinity requirements specified by this field
cease to be met at some point during pod execution
(e.g. due to an update), the system may or may
not try to eventually evict the pod from its node.
properties:
nodeSelectorTerms:
description: Required. A list of node selector
terms. The terms are ORed.
items:
description: A null or empty node selector
term matches no objects. The requirements
of them are ANDed. The TopologySelectorTerm
type implements a subset of the NodeSelectorTerm.
properties:
matchExpressions:
description: A list of node selector requirements
by node's labels.
items:
description: A node selector requirement
is a selector that contains values,
a key, and an operator that relates
the key and values.
properties:
key:
description: The label key that
the selector applies to.
type: string
operator:
description: Represents a key's
relationship to a set of values.
Valid operators are In, NotIn,
Exists, DoesNotExist. Gt, and
Lt.
type: string
values:
description: An array of string
values. If the operator is In
or NotIn, the values array must
be non-empty. If the operator
is Exists or DoesNotExist, the
values array must be empty. If
the operator is Gt or Lt, the
values array must have a single
element, which will be interpreted
as an integer. This array is replaced
during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchFields:
description: A list of node selector requirements
by node's fields.
items:
description: A node selector requirement
is a selector that contains values,
a key, and an operator that relates
the key and values.
properties:
key:
description: The label key that
the selector applies to.
type: string
operator:
description: Represents a key's
relationship to a set of values.
Valid operators are In, NotIn,
Exists, DoesNotExist. Gt, and
Lt.
type: string
values:
description: An array of string
values. If the operator is In
or NotIn, the values array must
be non-empty. If the operator
is Exists or DoesNotExist, the
values array must be empty. If
the operator is Gt or Lt, the
values array must have a single
element, which will be interpreted
as an integer. This array is replaced
during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
type: object
type: array
required:
- nodeSelectorTerms
type: object
type: object
podAffinity:
description: Describes pod affinity scheduling rules
(e.g. co-locate this pod in the same node, zone, etc.
as some other pod(s)).
properties:
preferredDuringSchedulingIgnoredDuringExecution:
description: The scheduler will prefer to schedule
pods to nodes that satisfy the affinity expressions
specified by this field, but it may choose a node
that violates one or more of the expressions.
The node that is most preferred is the one with
the greatest sum of weights, i.e. for each node
that meets all of the scheduling requirements
(resource request, requiredDuringScheduling affinity
expressions, etc.), compute a sum by iterating
through the elements of this field and adding
"weight" to the sum if the node has pods which
matches the corresponding podAffinityTerm; the
node(s) with the highest sum are the most preferred.
items:
description: The weights of all of the matched
WeightedPodAffinityTerm fields are added per-node
to find the most preferred node(s)
properties:
podAffinityTerm:
description: Required. A pod affinity term,
associated with the corresponding weight.
properties:
labelSelector:
description: A label query over a set
of resources, in this case pods.
properties:
matchExpressions:
description: matchExpressions is a
list of label selector requirements.
The requirements are ANDed.
items:
description: A label selector requirement
is a selector that contains values,
a key, and an operator that relates
the key and values.
properties:
key:
description: key is the label
key that the selector applies
to.
type: string
operator:
description: operator represents
a key's relationship to a
set of values. Valid operators
are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array
of string values. If the operator
is In or NotIn, the values
array must be non-empty. If
the operator is Exists or
DoesNotExist, the values array
must be empty. This array
is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map
of {key,value} pairs. A single {key,value}
in the matchLabels map is equivalent
to an element of matchExpressions,
whose key field is "key", the operator
is "In", and the values array contains
only "value". The requirements are
ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set
of namespaces that the term applies
to. The term is applied to the union
of the namespaces selected by this field
and the ones listed in the namespaces
field. null selector and null or empty
namespaces list means "this pod's namespace".
An empty selector ({}) matches all namespaces.
properties:
matchExpressions:
description: matchExpressions is a
list of label selector requirements.
The requirements are ANDed.
items:
description: A label selector requirement
is a selector that contains values,
a key, and an operator that relates
the key and values.
properties:
key:
description: key is the label
key that the selector applies
to.
type: string
operator:
description: operator represents
a key's relationship to a
set of values. Valid operators
are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array
of string values. If the operator
is In or NotIn, the values
array must be non-empty. If
the operator is Exists or
DoesNotExist, the values array
must be empty. This array
is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map
of {key,value} pairs. A single {key,value}
in the matchLabels map is equivalent
to an element of matchExpressions,
whose key field is "key", the operator
is "In", and the values array contains
only "value". The requirements are
ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static
list of namespace names that the term
applies to. The term is applied to the
union of the namespaces listed in this
field and the ones selected by namespaceSelector.
null or empty namespaces list and null
namespaceSelector means "this pod's
namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located
(affinity) or not co-located (anti-affinity)
with the pods matching the labelSelector
in the specified namespaces, where co-located
is defined as running on a node whose
value of the label with key topologyKey
matches that of any node on which any
of the selected pods is running. Empty
topologyKey is not allowed.
type: string
required:
- topologyKey
type: object
weight:
description: weight associated with matching
the corresponding podAffinityTerm, in the
range 1-100.
format: int32
type: integer
required:
- podAffinityTerm
- weight
type: object
type: array
requiredDuringSchedulingIgnoredDuringExecution:
description: If the affinity requirements specified
by this field are not met at scheduling time,
the pod will not be scheduled onto the node. If
the affinity requirements specified by this field
cease to be met at some point during pod execution
(e.g. due to a pod label update), the system may
or may not try to eventually evict the pod from
its node. When there are multiple elements, the
lists of nodes corresponding to each podAffinityTerm
are intersected, i.e. all terms must be satisfied.
items:
description: Defines a set of pods (namely those
matching the labelSelector relative to the given
namespace(s)) that this pod should be co-located
(affinity) or not co-located (anti-affinity)
with, where co-located is defined as running
on a node whose value of the label with key
<topologyKey> matches that of any node on which
a pod of the set of pods is running
properties:
labelSelector:
description: A label query over a set of resources,
in this case pods.
properties:
matchExpressions:
description: matchExpressions is a list
of label selector requirements. The
requirements are ANDed.
items:
description: A label selector requirement
is a selector that contains values,
a key, and an operator that relates
the key and values.
properties:
key:
description: key is the label key
that the selector applies to.
type: string
operator:
description: operator represents
a key's relationship to a set
of values. Valid operators are
In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array
of string values. If the operator
is In or NotIn, the values array
must be non-empty. If the operator
is Exists or DoesNotExist, the
values array must be empty. This
array is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator
is "In", and the values array contains
only "value". The requirements are ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set of
namespaces that the term applies to. The
term is applied to the union of the namespaces
selected by this field and the ones listed
in the namespaces field. null selector and
null or empty namespaces list means "this
pod's namespace". An empty selector ({})
matches all namespaces.
properties:
matchExpressions:
description: matchExpressions is a list
of label selector requirements. The
requirements are ANDed.
items:
description: A label selector requirement
is a selector that contains values,
a key, and an operator that relates
the key and values.
properties:
key:
description: key is the label key
that the selector applies to.
type: string
operator:
description: operator represents
a key's relationship to a set
of values. Valid operators are
In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array
of string values. If the operator
is In or NotIn, the values array
must be non-empty. If the operator
is Exists or DoesNotExist, the
values array must be empty. This
array is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator
is "In", and the values array contains
only "value". The requirements are ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static
list of namespace names that the term applies
to. The term is applied to the union of
the namespaces listed in this field and
the ones selected by namespaceSelector.
null or empty namespaces list and null namespaceSelector
means "this pod's namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located
(affinity) or not co-located (anti-affinity)
with the pods matching the labelSelector
in the specified namespaces, where co-located
is defined as running on a node whose value
of the label with key topologyKey matches
that of any node on which any of the selected
pods is running. Empty topologyKey is not
allowed.
type: string
required:
- topologyKey
type: object
type: array
type: object
podAntiAffinity:
description: Describes pod anti-affinity scheduling
rules (e.g. avoid putting this pod in the same node,
zone, etc. as some other pod(s)).
properties:
preferredDuringSchedulingIgnoredDuringExecution:
description: The scheduler will prefer to schedule
pods to nodes that satisfy the anti-affinity expressions
specified by this field, but it may choose a node
that violates one or more of the expressions.
The node that is most preferred is the one with
the greatest sum of weights, i.e. for each node
that meets all of the scheduling requirements
(resource request, requiredDuringScheduling anti-affinity
expressions, etc.), compute a sum by iterating
through the elements of this field and adding
"weight" to the sum if the node has pods which
matches the corresponding podAffinityTerm; the
node(s) with the highest sum are the most preferred.
items:
description: The weights of all of the matched
WeightedPodAffinityTerm fields are added per-node
to find the most preferred node(s)
properties:
podAffinityTerm:
description: Required. A pod affinity term,
associated with the corresponding weight.
properties:
labelSelector:
description: A label query over a set
of resources, in this case pods.
properties:
matchExpressions:
description: matchExpressions is a
list of label selector requirements.
The requirements are ANDed.
items:
description: A label selector requirement
is a selector that contains values,
a key, and an operator that relates
the key and values.
properties:
key:
description: key is the label
key that the selector applies
to.
type: string
operator:
description: operator represents
a key's relationship to a
set of values. Valid operators
are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array
of string values. If the operator
is In or NotIn, the values
array must be non-empty. If
the operator is Exists or
DoesNotExist, the values array
must be empty. This array
is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map
of {key,value} pairs. A single {key,value}
in the matchLabels map is equivalent
to an element of matchExpressions,
whose key field is "key", the operator
is "In", and the values array contains
only "value". The requirements are
ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set
of namespaces that the term applies
to. The term is applied to the union
of the namespaces selected by this field
and the ones listed in the namespaces
field. null selector and null or empty
namespaces list means "this pod's namespace".
An empty selector ({}) matches all namespaces.
properties:
matchExpressions:
description: matchExpressions is a
list of label selector requirements.
The requirements are ANDed.
items:
description: A label selector requirement
is a selector that contains values,
a key, and an operator that relates
the key and values.
properties:
key:
description: key is the label
key that the selector applies
to.
type: string
operator:
description: operator represents
a key's relationship to a
set of values. Valid operators
are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array
of string values. If the operator
is In or NotIn, the values
array must be non-empty. If
the operator is Exists or
DoesNotExist, the values array
must be empty. This array
is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map
of {key,value} pairs. A single {key,value}
in the matchLabels map is equivalent
to an element of matchExpressions,
whose key field is "key", the operator
is "In", and the values array contains
only "value". The requirements are
ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static
list of namespace names that the term
applies to. The term is applied to the
union of the namespaces listed in this
field and the ones selected by namespaceSelector.
null or empty namespaces list and null
namespaceSelector means "this pod's
namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located
(affinity) or not co-located (anti-affinity)
with the pods matching the labelSelector
in the specified namespaces, where co-located
is defined as running on a node whose
value of the label with key topologyKey
matches that of any node on which any
of the selected pods is running. Empty
topologyKey is not allowed.
type: string
required:
- topologyKey
type: object
weight:
description: weight associated with matching
the corresponding podAffinityTerm, in the
range 1-100.
format: int32
type: integer
required:
- podAffinityTerm
- weight
type: object
type: array
requiredDuringSchedulingIgnoredDuringExecution:
description: If the anti-affinity requirements specified
by this field are not met at scheduling time,
the pod will not be scheduled onto the node. If
the anti-affinity requirements specified by this
field cease to be met at some point during pod
execution (e.g. due to a pod label update), the
system may or may not try to eventually evict
the pod from its node. When there are multiple
elements, the lists of nodes corresponding to
each podAffinityTerm are intersected, i.e. all
terms must be satisfied.
items:
description: Defines a set of pods (namely those
matching the labelSelector relative to the given
namespace(s)) that this pod should be co-located
(affinity) or not co-located (anti-affinity)
with, where co-located is defined as running
on a node whose value of the label with key
<topologyKey> matches that of any node on which
a pod of the set of pods is running
properties:
labelSelector:
description: A label query over a set of resources,
in this case pods.
properties:
matchExpressions:
description: matchExpressions is a list
of label selector requirements. The
requirements are ANDed.
items:
description: A label selector requirement
is a selector that contains values,
a key, and an operator that relates
the key and values.
properties:
key:
description: key is the label key
that the selector applies to.
type: string
operator:
description: operator represents
a key's relationship to a set
of values. Valid operators are
In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array
of string values. If the operator
is In or NotIn, the values array
must be non-empty. If the operator
is Exists or DoesNotExist, the
values array must be empty. This
array is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator
is "In", and the values array contains
only "value". The requirements are ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set of
namespaces that the term applies to. The
term is applied to the union of the namespaces
selected by this field and the ones listed
in the namespaces field. null selector and
null or empty namespaces list means "this
pod's namespace". An empty selector ({})
matches all namespaces.
properties:
matchExpressions:
description: matchExpressions is a list
of label selector requirements. The
requirements are ANDed.
items:
description: A label selector requirement
is a selector that contains values,
a key, and an operator that relates
the key and values.
properties:
key:
description: key is the label key
that the selector applies to.
type: string
operator:
description: operator represents
a key's relationship to a set
of values. Valid operators are
In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array
of string values. If the operator
is In or NotIn, the values array
must be non-empty. If the operator
is Exists or DoesNotExist, the
values array must be empty. This
array is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator
is "In", and the values array contains
only "value". The requirements are ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static
list of namespace names that the term applies
to. The term is applied to the union of
the namespaces listed in this field and
the ones selected by namespaceSelector.
null or empty namespaces list and null namespaceSelector
means "this pod's namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located
(affinity) or not co-located (anti-affinity)
with the pods matching the labelSelector
in the specified namespaces, where co-located
is defined as running on a node whose value
of the label with key topologyKey matches
that of any node on which any of the selected
pods is running. Empty topologyKey is not
allowed.
type: string
required:
- topologyKey
type: object
type: array
type: object
type: object
architecture:
description: Specifies the architecture of the vm guest
you are attempting to run. Defaults to the compiled architecture
of the KubeVirt components
type: string
dnsConfig:
description: Specifies the DNS parameters of a pod. Parameters
specified here will be merged to the generated DNS configuration
based on DNSPolicy.
properties:
nameservers:
description: A list of DNS name server IP addresses.
This will be appended to the base nameservers generated
from DNSPolicy. Duplicated nameservers will be removed.
items:
type: string
type: array
options:
description: A list of DNS resolver options. This will
be merged with the base options generated from DNSPolicy.
Duplicated entries will be removed. Resolution options
given in Options will override those that appear in
the base DNSPolicy.
items:
description: PodDNSConfigOption defines DNS resolver
options of a pod.
properties:
name:
description: Required.
type: string
value:
type: string
type: object
type: array
searches:
description: A list of DNS search domains for host-name
lookup. This will be appended to the base search paths
generated from DNSPolicy. Duplicated search paths
will be removed.
items:
type: string
type: array
type: object
dnsPolicy:
description: Set DNS policy for the pod. Defaults to "ClusterFirst".
Valid values are 'ClusterFirstWithHostNet', 'ClusterFirst',
'Default' or 'None'. DNS parameters given in DNSConfig
will be merged with the policy selected with DNSPolicy.
To have DNS options set along with hostNetwork, you have
to specify DNS policy explicitly to 'ClusterFirstWithHostNet'.
type: string
domain:
description: Specification of the desired behavior of the
VirtualMachineInstance on the host.
properties:
chassis:
description: Chassis specifies the chassis info passed
to the domain.
properties:
asset:
type: string
manufacturer:
type: string
serial:
type: string
sku:
type: string
version:
type: string
type: object
clock:
description: Clock sets the clock and timers of the
vmi.
properties:
timer:
description: Timer specifies whih timers are attached
to the vmi.
properties:
hpet:
description: HPET (High Precision Event Timer)
- multiple timers with periodic interrupts.
properties:
present:
description: Enabled set to false makes
sure that the machine type or a preset
can't add the timer. Defaults to true.
type: boolean
tickPolicy:
description: TickPolicy determines what
happens when QEMU misses a deadline for
injecting a tick to the guest. One of
"delay", "catchup", "merge", "discard".
type: string
type: object
hyperv:
description: Hyperv (Hypervclock) - lets guests
read the host’s wall clock time (paravirtualized).
For windows guests.
properties:
present:
description: Enabled set to false makes
sure that the machine type or a preset
can't add the timer. Defaults to true.
type: boolean
type: object
kvm:
description: "KVM \t(KVM clock) - lets guests
read the host’s wall clock time (paravirtualized).
For linux guests."
properties:
present:
description: Enabled set to false makes
sure that the machine type or a preset
can't add the timer. Defaults to true.
type: boolean
type: object
pit:
description: PIT (Programmable Interval Timer)
- a timer with periodic interrupts.
properties:
present:
description: Enabled set to false makes
sure that the machine type or a preset
can't add the timer. Defaults to true.
type: boolean
tickPolicy:
description: TickPolicy determines what
happens when QEMU misses a deadline for
injecting a tick to the guest. One of
"delay", "catchup", "discard".
type: string
type: object
rtc:
description: RTC (Real Time Clock) - a continuously
running timer with periodic interrupts.
properties:
present:
description: Enabled set to false makes
sure that the machine type or a preset
can't add the timer. Defaults to true.
type: boolean
tickPolicy:
description: TickPolicy determines what
happens when QEMU misses a deadline for
injecting a tick to the guest. One of
"delay", "catchup".
type: string
track:
description: Track the guest or the wall
clock.
type: string
type: object
type: object
timezone:
description: Timezone sets the guest clock to the
specified timezone. Zone name follows the TZ environment
variable format (e.g. 'America/New_York').
type: string
utc:
description: UTC sets the guest clock to UTC on
each boot. If an offset is specified, guest changes
to the clock will be kept during reboots and are
not reset.
properties:
offsetSeconds:
description: OffsetSeconds specifies an offset
in seconds, relative to UTC. If set, guest
changes to the clock will be kept during reboots
and not reset.
type: integer
type: object
type: object
cpu:
description: CPU allow specified the detailed CPU topology
inside the vmi.
properties:
cores:
description: Cores specifies the number of cores
inside the vmi. Must be a value greater or equal
1.
format: int32
type: integer
dedicatedCpuPlacement:
description: DedicatedCPUPlacement requests the
scheduler to place the VirtualMachineInstance
on a node with enough dedicated pCPUs and pin
the vCPUs to it.
type: boolean
features:
description: Features specifies the CPU features
list inside the VMI.
items:
description: CPUFeature allows specifying a CPU
feature.
properties:
name:
description: Name of the CPU feature
type: string
policy:
description: 'Policy is the CPU feature attribute
which can have the following attributes:
force - The virtual CPU will claim the
feature is supported regardless of it being
supported by host CPU. require - Guest
creation will fail unless the feature is
supported by the host CPU or the hypervisor
is able to emulate it. optional - The feature
will be supported by virtual CPU if and
only if it is supported by host CPU. disable -
The feature will not be supported by virtual
CPU. forbid - Guest creation will fail
if the feature is supported by host CPU.
Defaults to require'
type: string
required:
- name
type: object
type: array
isolateEmulatorThread:
description: IsolateEmulatorThread requests one
more dedicated pCPU to be allocated for the VMI
to place the emulator thread on it.
type: boolean
maxSockets:
description: MaxSockets specifies the maximum amount
of sockets that can be hotplugged
format: int32
type: integer
model:
description: Model specifies the CPU model inside
the VMI. List of available models https://github.com/libvirt/libvirt/tree/master/src/cpu_map.
It is possible to specify special cases like "host-passthrough"
to get the same CPU as the node and "host-model"
to get CPU closest to the node one. Defaults to
host-model.
type: string
numa:
description: NUMA allows specifying settings for
the guest NUMA topology
properties:
guestMappingPassthrough:
description: GuestMappingPassthrough will create
an efficient guest topology based on host
CPUs exclusively assigned to a pod. The created
topology ensures that memory and CPUs on the
virtual numa nodes never cross boundaries
of host numa nodes.
type: object
type: object
realtime:
description: Realtime instructs the virt-launcher
to tune the VMI for lower latency, optional for
real time workloads
properties:
mask:
description: 'Mask defines the vcpu mask expression
that defines which vcpus are used for realtime.
Format matches libvirt''s expressions. Example:
"0-3,^1","0,2,3","2-3"'
type: string
type: object
sockets:
description: Sockets specifies the number of sockets
inside the vmi. Must be a value greater or equal
1.
format: int32
type: integer
threads:
description: Threads specifies the number of threads
inside the vmi. Must be a value greater or equal
1.
format: int32
type: integer
type: object
devices:
description: Devices allows adding disks, network interfaces,
and others
properties:
autoattachGraphicsDevice:
description: Whether to attach the default graphics
device or not. VNC will not be available if set
to false. Defaults to true.
type: boolean
autoattachInputDevice:
description: Whether to attach an Input Device.
Defaults to false.
type: boolean
autoattachMemBalloon:
description: Whether to attach the Memory balloon
device with default period. Period can be adjusted
in virt-config. Defaults to true.
type: boolean
autoattachPodInterface:
description: Whether to attach a pod network interface.
Defaults to true.
type: boolean
autoattachSerialConsole:
description: Whether to attach the default virtio-serial
console or not. Serial console access will not
be available if set to false. Defaults to true.
type: boolean
autoattachVSOCK:
description: Whether to attach the VSOCK CID to
the VM or not. VSOCK access will be available
if set to true. Defaults to false.
type: boolean
blockMultiQueue:
description: Whether or not to enable virtio multi-queue
for block devices. Defaults to false.
type: boolean
clientPassthrough:
description: To configure and access client devices
such as redirecting USB
type: object
disableHotplug:
description: DisableHotplug disabled the ability
to hotplug disks.
type: boolean
disks:
description: Disks describes disks, cdroms and luns
which are connected to the vmi.
items:
properties:
blockSize:
description: If specified, the virtual disk
will be presented with the given block sizes.
properties:
custom:
description: CustomBlockSize represents
the desired logical and physical block
size for a VM disk.
properties:
logical:
type: integer
physical:
type: integer
required:
- logical
- physical
type: object
matchVolume:
description: Represents if a feature is
enabled or disabled.
properties:
enabled:
description: Enabled determines if
the feature should be enabled or
disabled on the guest. Defaults
to true.
type: boolean
type: object
type: object
bootOrder:
description: BootOrder is an integer value
> 0, used to determine ordering of boot
devices. Lower values take precedence. Each
disk or interface that has a boot order
must have a unique value. Disks without
a boot order are not tried if a disk with
a boot order exists.
type: integer
cache:
description: 'Cache specifies which kvm disk
cache mode should be used. Supported values
are: CacheNone, CacheWriteThrough.'
type: string
cdrom:
description: Attach a volume as a cdrom to
the vmi.
properties:
bus:
description: 'Bus indicates the type of
disk device to emulate. supported values:
virtio, sata, scsi.'
type: string
readonly:
description: ReadOnly. Defaults to true.
type: boolean
tray:
description: Tray indicates if the tray
of the device is open or closed. Allowed
values are "open" and "closed". Defaults
to closed.
type: string
type: object
dedicatedIOThread:
description: dedicatedIOThread indicates this
disk should have an exclusive IO Thread.
Enabling this implies useIOThreads = true.
Defaults to false.
type: boolean
disk:
description: Attach a volume as a disk to
the vmi.
properties:
bus:
description: 'Bus indicates the type of
disk device to emulate. supported values:
virtio, sata, scsi, usb.'
type: string
pciAddress:
description: 'If specified, the virtual
disk will be placed on the guests pci
address with the specified PCI address.
For example: 0000:81:01.10'
type: string
readonly:
description: ReadOnly. Defaults to false.
type: boolean
type: object
errorPolicy:
description: If specified, it can change the
default error policy (stop) for the disk
type: string
io:
description: 'IO specifies which QEMU disk
IO mode should be used. Supported values
are: native, default, threads.'
type: string
lun:
description: Attach a volume as a LUN to the
vmi.
properties:
bus:
description: 'Bus indicates the type of
disk device to emulate. supported values:
virtio, sata, scsi.'
type: string
readonly:
description: ReadOnly. Defaults to false.
type: boolean
reservation:
description: Reservation indicates if
the disk needs to support the persistent
reservation for the SCSI disk
type: boolean
type: object
name:
description: Name is the device name
type: string
serial:
description: Serial provides the ability to
specify a serial number for the disk device.
type: string
shareable:
description: If specified the disk is made
sharable and multiple write from different
VMs are permitted
type: boolean
tag:
description: If specified, disk address and
its tag will be provided to the guest via
config drive metadata
type: string
required:
- name
type: object
type: array
downwardMetrics:
description: DownwardMetrics creates a virtio serials
for exposing the downward metrics to the vmi.
type: object
filesystems:
description: Filesystems describes filesystem which
is connected to the vmi.
items:
properties:
name:
description: Name is the device name
type: string
virtiofs:
description: Virtiofs is supported
type: object
required:
- name
- virtiofs
type: object
type: array
x-kubernetes-list-type: atomic
gpus:
description: Whether to attach a GPU device to the
vmi.
items:
properties:
deviceName:
type: string
name:
description: Name of the GPU device as exposed
by a device plugin
type: string
tag:
description: If specified, the virtual network
interface address and its tag will be provided
to the guest via config drive
type: string
virtualGPUOptions:
properties:
display:
properties:
enabled:
description: Enabled determines if
a display addapter backed by a vGPU
should be enabled or disabled on
the guest. Defaults to true.
type: boolean
ramFB:
description: Enables a boot framebuffer,
until the guest OS loads a real
GPU driver Defaults to true.
properties:
enabled:
description: Enabled determines
if the feature should be enabled
or disabled on the guest. Defaults
to true.
type: boolean
type: object
type: object
type: object
required:
- deviceName
- name
type: object
type: array
x-kubernetes-list-type: atomic
hostDevices:
description: Whether to attach a host device to
the vmi.
items:
properties:
deviceName:
description: DeviceName is the resource name
of the host device exposed by a device plugin
type: string
name:
type: string
tag:
description: If specified, the virtual network
interface address and its tag will be provided
to the guest via config drive
type: string
required:
- deviceName
- name
type: object
type: array
x-kubernetes-list-type: atomic
inputs:
description: Inputs describe input devices
items:
properties:
bus:
description: 'Bus indicates the bus of input
device to emulate. Supported values: virtio,
usb.'
type: string
name:
description: Name is the device name
type: string
type:
description: 'Type indicated the type of input
device. Supported values: tablet.'
type: string
required:
- name
- type
type: object
type: array
interfaces:
description: Interfaces describe network interfaces
which are added to the vmi.
items:
properties:
acpiIndex:
description: If specified, the ACPI index
is used to provide network interface device
naming, that is stable across changes in
PCI addresses assigned to the device. This
value is required to be unique across all
devices and be between 1 and (16*1024-1).
type: integer
binding:
description: 'Binding specifies the binding
plugin that will be used to connect the
interface to the guest. It provides an alternative
to InterfaceBindingMethod. version: 1alphav1'
properties:
name:
description: 'Name references to the binding
name as denined in the kubevirt CR.
version: 1alphav1'
type: string
required:
- name
type: object
bootOrder:
description: BootOrder is an integer value
> 0, used to determine ordering of boot
devices. Lower values take precedence. Each
interface or disk that has a boot order
must have a unique value. Interfaces without
a boot order are not tried.
type: integer
bridge:
description: InterfaceBridge connects to a
given network via a linux bridge.
type: object
dhcpOptions:
description: If specified the network interface
will pass additional DHCP options to the
VMI
properties:
bootFileName:
description: If specified will pass option
67 to interface's DHCP server
type: string
ntpServers:
description: If specified will pass the
configured NTP server to the VM via
DHCP option 042.
items:
type: string
type: array
privateOptions:
description: 'If specified will pass extra
DHCP options for private use, range:
224-254'
items:
description: DHCPExtraOptions defines
Extra DHCP options for a VM.
properties:
option:
description: Option is an Integer
value from 224-254 Required.
type: integer
value:
description: Value is a String value
for the Option provided Required.
type: string
required:
- option
- value
type: object
type: array
tftpServerName:
description: If specified will pass option
66 to interface's DHCP server
type: string
type: object
macAddress:
description: 'Interface MAC address. For example:
de:ad:00:00:be:af or DE-AD-00-00-BE-AF.'
type: string
macvtap:
description: Deprecated, please refer to Kubevirt
user guide for alternatives.
type: object
masquerade:
description: InterfaceMasquerade connects
to a given network using netfilter rules
to nat the traffic.
type: object
model:
description: 'Interface model. One of: e1000,
e1000e, ne2k_pci, pcnet, rtl8139, virtio.
Defaults to virtio. TODO:(ihar) switch to
enums once opengen-api supports them. See:
https://github.com/kubernetes/kube-openapi/issues/51'
type: string
name:
description: Logical name of the interface
as well as a reference to the associated
networks. Must match the Name of a Network.
type: string
passt:
description: Deprecated, please refer to Kubevirt
user guide for alternatives.
type: object
pciAddress:
description: 'If specified, the virtual network
interface will be placed on the guests pci
address with the specified PCI address.
For example: 0000:81:01.10'
type: string
ports:
description: List of ports to be forwarded
to the virtual machine.
items:
description: Port represents a port to expose
from the virtual machine. Default protocol
TCP. The port field is mandatory
properties:
name:
description: If specified, this must
be an IANA_SVC_NAME and unique within
the pod. Each named port in a pod
must have a unique name. Name for
the port that can be referred to by
services.
type: string
port:
description: Number of port to expose
for the virtual machine. This must
be a valid port number, 0 < x < 65536.
format: int32
type: integer
protocol:
description: Protocol for port. Must
be UDP or TCP. Defaults to "TCP".
type: string
required:
- port
type: object
type: array
slirp:
description: InterfaceSlirp connects to a
given network using QEMU user networking
mode.
type: object
sriov:
description: InterfaceSRIOV connects to a
given network by passing-through an SR-IOV
PCI device via vfio.
type: object
state:
description: State represents the requested
operational state of the interface. The
(only) value supported is 'absent', expressing
a request to remove the interface.
type: string
tag:
description: If specified, the virtual network
interface address and its tag will be provided
to the guest via config drive
type: string
required:
- name
type: object
type: array
logSerialConsole:
description: Whether to log the auto-attached default
serial console or not. Serial console logs will
be collect to a file and then streamed from a
named 'guest-console-log'. Not relevant if autoattachSerialConsole
is disabled. Defaults to cluster wide setting
on VirtualMachineOptions.
type: boolean
networkInterfaceMultiqueue:
description: If specified, virtual network interfaces
configured with a virtio bus will also enable
the vhost multiqueue feature for network devices.
The number of queues created depends on additional
factors of the VirtualMachineInstance, like the
number of guest CPUs.
type: boolean
rng:
description: Whether to have random number generator
from host
type: object
sound:
description: Whether to emulate a sound device.
properties:
model:
description: 'We only support ich9 or ac97.
If SoundDevice is not set: No sound card is
emulated. If SoundDevice is set but Model
is not: ich9'
type: string
name:
description: User's defined name for this sound
device
type: string
required:
- name
type: object
tpm:
description: Whether to emulate a TPM device.
properties:
persistent:
description: Persistent indicates the state
of the TPM device should be kept accross reboots
Defaults to false
type: boolean
type: object
useVirtioTransitional:
description: Fall back to legacy virtio 0.9 support
if virtio bus is selected on devices. This is
helpful for old machines like CentOS6 or RHEL6
which do not understand virtio_non_transitional
(virtio 1.0).
type: boolean
watchdog:
description: Watchdog describes a watchdog device
which can be added to the vmi.
properties:
i6300esb:
description: i6300esb watchdog device.
properties:
action:
description: The action to take. Valid values
are poweroff, reset, shutdown. Defaults
to reset.
type: string
type: object
name:
description: Name of the watchdog.
type: string
required:
- name
type: object
type: object
features:
description: Features like acpi, apic, hyperv, smm.
properties:
acpi:
description: ACPI enables/disables ACPI inside the
guest. Defaults to enabled.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
type: object
apic:
description: Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
endOfInterrupt:
description: EndOfInterrupt enables the end
of interrupt notification in the guest. Defaults
to false.
type: boolean
type: object
hyperv:
description: Defaults to the machine type setting.
properties:
evmcs:
description: EVMCS Speeds up L2 vmexits, but
disables other virtualization features. Requires
vapic. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
type: object
frequencies:
description: Frequencies improves the TSC clock
source handling for Hyper-V on KVM. Defaults
to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
type: object
ipi:
description: IPI improves performances in overcommited
environments. Requires vpindex. Defaults to
the machine type setting.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
type: object
reenlightenment:
description: Reenlightenment enables the notifications
on TSC frequency changes. Defaults to the
machine type setting.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
type: object
relaxed:
description: Relaxed instructs the guest OS
to disable watchdog timeouts. Defaults to
the machine type setting.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
type: object
reset:
description: Reset enables Hyperv reboot/reset
for the vmi. Requires synic. Defaults to the
machine type setting.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
type: object
runtime:
description: Runtime improves the time accounting
to improve scheduling in the guest. Defaults
to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
type: object
spinlocks:
description: Spinlocks allows to configure the
spinlock retry attempts.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
spinlocks:
description: Retries indicates the number
of retries. Must be a value greater or
equal 4096. Defaults to 4096.
format: int32
type: integer
type: object
synic:
description: SyNIC enables the Synthetic Interrupt
Controller. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
type: object
synictimer:
description: SyNICTimer enables Synthetic Interrupt
Controller Timers, reducing CPU load. Defaults
to the machine type setting.
properties:
direct:
description: Represents if a feature is
enabled or disabled.
properties:
enabled:
description: Enabled determines if the
feature should be enabled or disabled
on the guest. Defaults to true.
type: boolean
type: object
enabled:
type: boolean
type: object
tlbflush:
description: TLBFlush improves performances
in overcommited environments. Requires vpindex.
Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
type: object
vapic:
description: VAPIC improves the paravirtualized
handling of interrupts. Defaults to the machine
type setting.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
type: object
vendorid:
description: VendorID allows setting the hypervisor
vendor id. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
vendorid:
description: VendorID sets the hypervisor
vendor id, visible to the vmi. String
up to twelve characters.
type: string
type: object
vpindex:
description: VPIndex enables the Virtual Processor
Index to help windows identifying virtual
processors. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
type: object
type: object
kvm:
description: Configure how KVM presence is exposed
to the guest.
properties:
hidden:
description: Hide the KVM hypervisor from standard
MSR based discovery. Defaults to false
type: boolean
type: object
pvspinlock:
description: Notify the guest that the host supports
paravirtual spinlocks. For older kernels this
feature should be explicitly disabled.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
type: object
smm:
description: SMM enables/disables System Management
Mode. TSEG not yet implemented.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
type: object
type: object
firmware:
description: Firmware.
properties:
acpi:
description: Information that can be set in the
ACPI table
properties:
slicNameRef:
description: 'SlicNameRef should match the volume
name of a secret object. The data in the secret
should be a binary blob that follows the ACPI
SLIC standard, see: https://learn.microsoft.com/en-us/previous-versions/windows/hardware/design/dn653305(v=vs.85)'
type: string
type: object
bootloader:
description: Settings to control the bootloader
that is used.
properties:
bios:
description: If set (default), BIOS will be
used.
properties:
useSerial:
description: If set, the BIOS output will
be transmitted over serial
type: boolean
type: object
efi:
description: If set, EFI will be used instead
of BIOS.
properties:
persistent:
description: If set to true, Persistent
will persist the EFI NVRAM across reboots.
Defaults to false
type: boolean
secureBoot:
description: If set, SecureBoot will be
enabled and the OVMF roms will be swapped
for SecureBoot-enabled ones. Requires
SMM to be enabled. Defaults to true
type: boolean
type: object
type: object
kernelBoot:
description: Settings to set the kernel for booting.
properties:
container:
description: Container defines the container
that containes kernel artifacts
properties:
image:
description: Image that contains initrd
/ kernel files.
type: string
imagePullPolicy:
description: 'Image pull policy. One of
Always, Never, IfNotPresent. Defaults
to Always if :latest tag is specified,
or IfNotPresent otherwise. Cannot be updated.
More info: https://kubernetes.io/docs/concepts/containers/images#updating-images'
type: string
imagePullSecret:
description: ImagePullSecret is the name
of the Docker registry secret required
to pull the image. The secret must already
exist.
type: string
initrdPath:
description: the fully-qualified path to
the ramdisk image in the host OS
type: string
kernelPath:
description: The fully-qualified path to
the kernel image in the host OS
type: string
required:
- image
type: object
kernelArgs:
description: Arguments to be passed to the kernel
at boot time
type: string
type: object
serial:
description: The system-serial-number in SMBIOS
type: string
uuid:
description: UUID reported by the vmi bios. Defaults
to a random generated uid.
type: string
type: object
ioThreadsPolicy:
description: 'Controls whether or not disks will share
IOThreads. Omitting IOThreadsPolicy disables use of
IOThreads. One of: shared, auto'
type: string
launchSecurity:
description: Launch Security setting of the vmi.
properties:
sev:
description: AMD Secure Encrypted Virtualization
(SEV).
properties:
attestation:
description: If specified, run the attestation
process for a vmi.
type: object
dhCert:
description: Base64 encoded guest owner's Diffie-Hellman
key.
type: string
policy:
description: 'Guest policy flags as defined
in AMD SEV API specification. Note: due to
security reasons it is not allowed to enable
guest debugging. Therefore NoDebug flag is
not exposed to users and is always true.'
properties:
encryptedState:
description: SEV-ES is required. Defaults
to false.
type: boolean
type: object
session:
description: Base64 encoded session blob.
type: string
type: object
type: object
machine:
description: Machine type.
properties:
type:
description: QEMU machine type is the actual chipset
of the VirtualMachineInstance.
type: string
type: object
memory:
description: Memory allow specifying the VMI memory
features.
properties:
guest:
anyOf:
- type: integer
- type: string
description: Guest allows to specifying the amount
of memory which is visible inside the Guest OS.
The Guest must lie between Requests and Limits
from the resources section. Defaults to the requested
memory in the resources section if not specified.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
hugepages:
description: Hugepages allow to use hugepages for
the VirtualMachineInstance instead of regular
memory.
properties:
pageSize:
description: PageSize specifies the hugepage
size, for x86_64 architecture valid values
are 1Gi and 2Mi.
type: string
type: object
maxGuest:
anyOf:
- type: integer
- type: string
description: MaxGuest allows to specify the maximum
amount of memory which is visible inside the Guest
OS. The delta between MaxGuest and Guest is the
amount of memory that can be hot(un)plugged.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
type: object
resources:
description: Resources describes the Compute Resources
required by this vmi.
properties:
limits:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: Limits describes the maximum amount
of compute resources allowed. Valid resource keys
are "memory" and "cpu".
type: object
overcommitGuestOverhead:
description: Don't ask the scheduler to take the
guest-management overhead into account. Instead
put the overhead only into the container's memory
limit. This can lead to crashes if all memory
is in use on a node. Defaults to false.
type: boolean
requests:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: Requests is a description of the initial
vmi resources. Valid resource keys are "memory"
and "cpu".
type: object
type: object
required:
- devices
type: object
evictionStrategy:
description: 'EvictionStrategy describes the strategy to
follow when a node drain occurs. The possible options
are: - "None": No action will be taken, according to the
specified ''RunStrategy'' the VirtualMachine will be restarted
or shutdown. - "LiveMigrate": the VirtualMachineInstance
will be migrated instead of being shutdown. - "LiveMigrateIfPossible":
the same as "LiveMigrate" but only if the VirtualMachine
is Live-Migratable, otherwise it will behave as "None".
- "External": the VirtualMachineInstance will be protected
by a PDB and ''vmi.Status.EvacuationNodeName'' will be
set on eviction. This is mainly useful for cluster-api-provider-kubevirt
(capk) which needs a way for VMI''s to be blocked from
eviction, yet signal capk that eviction has been called
on the VMI so the capk controller can handle tearing the
VMI down. Details can be found in the commit description
https://github.com/kubevirt/kubevirt/commit/c1d77face705c8b126696bac9a3ee3825f27f1fa.'
type: string
hostname:
description: Specifies the hostname of the vmi If not specified,
the hostname will be set to the name of the vmi, if dhcp
or cloud-init is configured properly.
type: string
livenessProbe:
description: 'Periodic probe of VirtualMachineInstance liveness.
VirtualmachineInstances will be stopped if the probe fails.
Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
properties:
exec:
description: One and only one of the following should
be specified. Exec specifies the action to take, it
will be executed on the guest through the qemu-guest-agent.
If the guest agent is not available, this probe will
fail.
properties:
command:
description: Command is the command line to execute
inside the container, the working directory for
the command is root ('/') in the container's
filesystem. The command is simply exec'd, it is
not run inside a shell, so traditional shell instructions
('|', etc) won't work. To use a shell, you need
to explicitly call out to that shell. Exit status
of 0 is treated as live/healthy and non-zero is
unhealthy.
items:
type: string
type: array
type: object
failureThreshold:
description: Minimum consecutive failures for the probe
to be considered failed after having succeeded. Defaults
to 3. Minimum value is 1.
format: int32
type: integer
guestAgentPing:
description: GuestAgentPing contacts the qemu-guest-agent
for availability checks.
type: object
httpGet:
description: HTTPGet specifies the http request to perform.
properties:
host:
description: Host name to connect to, defaults to
the pod IP. You probably want to set "Host" in
httpHeaders instead.
type: string
httpHeaders:
description: Custom headers to set in the request.
HTTP allows repeated headers.
items:
description: HTTPHeader describes a custom header
to be used in HTTP probes
properties:
name:
description: The header field name
type: string
value:
description: The header field value
type: string
required:
- name
- value
type: object
type: array
path:
description: Path to access on the HTTP server.
type: string
port:
anyOf:
- type: integer
- type: string
description: Name or number of the port to access
on the container. Number must be in the range
1 to 65535. Name must be an IANA_SVC_NAME.
x-kubernetes-int-or-string: true
scheme:
description: Scheme to use for connecting to the
host. Defaults to HTTP.
type: string
required:
- port
type: object
initialDelaySeconds:
description: 'Number of seconds after the VirtualMachineInstance
has started before liveness probes are initiated.
More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
format: int32
type: integer
periodSeconds:
description: How often (in seconds) to perform the probe.
Default to 10 seconds. Minimum value is 1.
format: int32
type: integer
successThreshold:
description: Minimum consecutive successes for the probe
to be considered successful after having failed. Defaults
to 1. Must be 1 for liveness. Minimum value is 1.
format: int32
type: integer
tcpSocket:
description: 'TCPSocket specifies an action involving
a TCP port. TCP hooks not yet supported TODO: implement
a realistic TCP lifecycle hook'
properties:
host:
description: 'Optional: Host name to connect to,
defaults to the pod IP.'
type: string
port:
anyOf:
- type: integer
- type: string
description: Number or name of the port to access
on the container. Number must be in the range
1 to 65535. Name must be an IANA_SVC_NAME.
x-kubernetes-int-or-string: true
required:
- port
type: object
timeoutSeconds:
description: 'Number of seconds after which the probe
times out. For exec probes the timeout fails the probe
but does not terminate the command running on the
guest. This means a blocking command can result in
an increasing load on the guest. A small buffer will
be added to the resulting workload exec probe to compensate
for delays caused by the qemu guest exec mechanism.
Defaults to 1 second. Minimum value is 1. More info:
https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
format: int32
type: integer
type: object
networks:
description: List of networks that can be attached to a
vm's virtual interface.
items:
description: Network represents a network type and a resource
that should be connected to the vm.
properties:
multus:
description: Represents the multus cni network.
properties:
default:
description: Select the default network and add
it to the multus-cni.io/default-network annotation.
type: boolean
networkName:
description: 'References to a NetworkAttachmentDefinition
CRD object. Format: <networkName>, <namespace>/<networkName>.
If namespace is not specified, VMI namespace
is assumed.'
type: string
required:
- networkName
type: object
name:
description: 'Network name. Must be a DNS_LABEL and
unique within the vm. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names'
type: string
pod:
description: Represents the stock pod network interface.
properties:
vmIPv6NetworkCIDR:
description: IPv6 CIDR for the vm network. Defaults
to fd10:0:2::/120 if not specified.
type: string
vmNetworkCIDR:
description: CIDR for vm network. Default 10.0.2.0/24
if not specified.
type: string
type: object
required:
- name
type: object
type: array
nodeSelector:
additionalProperties:
type: string
description: 'NodeSelector is a selector which must be true
for the vmi to fit on a node. Selector which must match
a node''s labels for the vmi to be scheduled on that node.
More info: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/'
type: object
priorityClassName:
description: If specified, indicates the pod's priority.
If not specified, the pod priority will be default or
zero if there is no default.
type: string
readinessProbe:
description: 'Periodic probe of VirtualMachineInstance service
readiness. VirtualmachineInstances will be removed from
service endpoints if the probe fails. Cannot be updated.
More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
properties:
exec:
description: One and only one of the following should
be specified. Exec specifies the action to take, it
will be executed on the guest through the qemu-guest-agent.
If the guest agent is not available, this probe will
fail.
properties:
command:
description: Command is the command line to execute
inside the container, the working directory for
the command is root ('/') in the container's
filesystem. The command is simply exec'd, it is
not run inside a shell, so traditional shell instructions
('|', etc) won't work. To use a shell, you need
to explicitly call out to that shell. Exit status
of 0 is treated as live/healthy and non-zero is
unhealthy.
items:
type: string
type: array
type: object
failureThreshold:
description: Minimum consecutive failures for the probe
to be considered failed after having succeeded. Defaults
to 3. Minimum value is 1.
format: int32
type: integer
guestAgentPing:
description: GuestAgentPing contacts the qemu-guest-agent
for availability checks.
type: object
httpGet:
description: HTTPGet specifies the http request to perform.
properties:
host:
description: Host name to connect to, defaults to
the pod IP. You probably want to set "Host" in
httpHeaders instead.
type: string
httpHeaders:
description: Custom headers to set in the request.
HTTP allows repeated headers.
items:
description: HTTPHeader describes a custom header
to be used in HTTP probes
properties:
name:
description: The header field name
type: string
value:
description: The header field value
type: string
required:
- name
- value
type: object
type: array
path:
description: Path to access on the HTTP server.
type: string
port:
anyOf:
- type: integer
- type: string
description: Name or number of the port to access
on the container. Number must be in the range
1 to 65535. Name must be an IANA_SVC_NAME.
x-kubernetes-int-or-string: true
scheme:
description: Scheme to use for connecting to the
host. Defaults to HTTP.
type: string
required:
- port
type: object
initialDelaySeconds:
description: 'Number of seconds after the VirtualMachineInstance
has started before liveness probes are initiated.
More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
format: int32
type: integer
periodSeconds:
description: How often (in seconds) to perform the probe.
Default to 10 seconds. Minimum value is 1.
format: int32
type: integer
successThreshold:
description: Minimum consecutive successes for the probe
to be considered successful after having failed. Defaults
to 1. Must be 1 for liveness. Minimum value is 1.
format: int32
type: integer
tcpSocket:
description: 'TCPSocket specifies an action involving
a TCP port. TCP hooks not yet supported TODO: implement
a realistic TCP lifecycle hook'
properties:
host:
description: 'Optional: Host name to connect to,
defaults to the pod IP.'
type: string
port:
anyOf:
- type: integer
- type: string
description: Number or name of the port to access
on the container. Number must be in the range
1 to 65535. Name must be an IANA_SVC_NAME.
x-kubernetes-int-or-string: true
required:
- port
type: object
timeoutSeconds:
description: 'Number of seconds after which the probe
times out. For exec probes the timeout fails the probe
but does not terminate the command running on the
guest. This means a blocking command can result in
an increasing load on the guest. A small buffer will
be added to the resulting workload exec probe to compensate
for delays caused by the qemu guest exec mechanism.
Defaults to 1 second. Minimum value is 1. More info:
https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
format: int32
type: integer
type: object
schedulerName:
description: If specified, the VMI will be dispatched by
specified scheduler. If not specified, the VMI will be
dispatched by default scheduler.
type: string
startStrategy:
description: StartStrategy can be set to "Paused" if Virtual
Machine should be started in paused state.
type: string
subdomain:
description: If specified, the fully qualified vmi hostname
will be "<hostname>.<subdomain>.<pod namespace>.svc.<cluster
domain>". If not specified, the vmi will not have a domainname
at all. The DNS entry will resolve to the vmi, no matter
if the vmi itself can pick up a hostname.
type: string
terminationGracePeriodSeconds:
description: Grace period observed after signalling a VirtualMachineInstance
to stop after which the VirtualMachineInstance is force
terminated.
format: int64
type: integer
tolerations:
description: If toleration is specified, obey all the toleration
rules.
items:
description: The pod this Toleration is attached to tolerates
any taint that matches the triple <key,value,effect>
using the matching operator <operator>.
properties:
effect:
description: Effect indicates the taint effect to
match. Empty means match all taint effects. When
specified, allowed values are NoSchedule, PreferNoSchedule
and NoExecute.
type: string
key:
description: Key is the taint key that the toleration
applies to. Empty means match all taint keys. If
the key is empty, operator must be Exists; this
combination means to match all values and all keys.
type: string
operator:
description: Operator represents a key's relationship
to the value. Valid operators are Exists and Equal.
Defaults to Equal. Exists is equivalent to wildcard
for value, so that a pod can tolerate all taints
of a particular category.
type: string
tolerationSeconds:
description: TolerationSeconds represents the period
of time the toleration (which must be of effect
NoExecute, otherwise this field is ignored) tolerates
the taint. By default, it is not set, which means
tolerate the taint forever (do not evict). Zero
and negative values will be treated as 0 (evict
immediately) by the system.
format: int64
type: integer
value:
description: Value is the taint value the toleration
matches to. If the operator is Exists, the value
should be empty, otherwise just a regular string.
type: string
type: object
type: array
topologySpreadConstraints:
description: TopologySpreadConstraints describes how a group
of VMIs will be spread across a given topology domains.
K8s scheduler will schedule VMI pods in a way which abides
by the constraints.
items:
description: TopologySpreadConstraint specifies how to
spread matching pods among the given topology.
properties:
labelSelector:
description: LabelSelector is used to find matching
pods. Pods that match this label selector are counted
to determine the number of pods in their corresponding
topology domain.
properties:
matchExpressions:
description: matchExpressions is a list of label
selector requirements. The requirements are
ANDed.
items:
description: A label selector requirement is
a selector that contains values, a key, and
an operator that relates the key and values.
properties:
key:
description: key is the label key that the
selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty. If
the operator is Exists or DoesNotExist,
the values array must be empty. This array
is replaced during a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is "In",
and the values array contains only "value".
The requirements are ANDed.
type: object
type: object
matchLabelKeys:
description: MatchLabelKeys is a set of pod label
keys to select the pods over which spreading will
be calculated. The keys are used to lookup values
from the incoming pod labels, those key-value labels
are ANDed with labelSelector to select the group
of existing pods over which spreading will be calculated
for the incoming pod. Keys that don't exist in the
incoming pod labels will be ignored. A null or empty
list means only match against labelSelector.
items:
type: string
type: array
x-kubernetes-list-type: atomic
maxSkew:
description: 'MaxSkew describes the degree to which
pods may be unevenly distributed. When ''whenUnsatisfiable=DoNotSchedule'',
it is the maximum permitted difference between the
number of matching pods in the target topology and
the global minimum. The global minimum is the minimum
number of matching pods in an eligible domain or
zero if the number of eligible domains is less than
MinDomains. For example, in a 3-zone cluster, MaxSkew
is set to 1, and pods with the same labelSelector
spread as 2/2/1: In this case, the global minimum
is 1. | zone1 | zone2 | zone3 | | P P | P P | P |
- if MaxSkew is 1, incoming pod can only be scheduled
to zone3 to become 2/2/2; scheduling it onto zone1(zone2)
would make the ActualSkew(3-1) on zone1(zone2) violate
MaxSkew(1). - if MaxSkew is 2, incoming pod can
be scheduled onto any zone. When ''whenUnsatisfiable=ScheduleAnyway'',
it is used to give higher precedence to topologies
that satisfy it. It''s a required field. Default
value is 1 and 0 is not allowed.'
format: int32
type: integer
minDomains:
description: "MinDomains indicates a minimum number
of eligible domains. When the number of eligible
domains with matching topology keys is less than
minDomains, Pod Topology Spread treats \"global
minimum\" as 0, and then the calculation of Skew
is performed. And when the number of eligible domains
with matching topology keys equals or greater than
minDomains, this value has no effect on scheduling.
As a result, when the number of eligible domains
is less than minDomains, scheduler won't schedule
more than maxSkew Pods to those domains. If value
is nil, the constraint behaves as if MinDomains
is equal to 1. Valid values are integers greater
than 0. When value is not nil, WhenUnsatisfiable
must be DoNotSchedule. \n For example, in a 3-zone
cluster, MaxSkew is set to 2, MinDomains is set
to 5 and pods with the same labelSelector spread
as 2/2/2: | zone1 | zone2 | zone3 | | P P | P
P | P P | The number of domains is less than
5(MinDomains), so \"global minimum\" is treated
as 0. In this situation, new pod with the same labelSelector
cannot be scheduled, because computed skew will
be 3(3 - 0) if new Pod is scheduled to any of the
three zones, it will violate MaxSkew. \n This is
a beta field and requires the MinDomainsInPodTopologySpread
feature gate to be enabled (enabled by default)."
format: int32
type: integer
nodeAffinityPolicy:
description: "NodeAffinityPolicy indicates how we
will treat Pod's nodeAffinity/nodeSelector when
calculating pod topology spread skew. Options are:
- Honor: only nodes matching nodeAffinity/nodeSelector
are included in the calculations. - Ignore: nodeAffinity/nodeSelector
are ignored. All nodes are included in the calculations.
\n If this value is nil, the behavior is equivalent
to the Honor policy. This is a beta-level feature
default enabled by the NodeInclusionPolicyInPodTopologySpread
feature flag."
type: string
nodeTaintsPolicy:
description: "NodeTaintsPolicy indicates how we will
treat node taints when calculating pod topology
spread skew. Options are: - Honor: nodes without
taints, along with tainted nodes for which the incoming
pod has a toleration, are included. - Ignore: node
taints are ignored. All nodes are included. \n If
this value is nil, the behavior is equivalent to
the Ignore policy. This is a beta-level feature
default enabled by the NodeInclusionPolicyInPodTopologySpread
feature flag."
type: string
topologyKey:
description: TopologyKey is the key of node labels.
Nodes that have a label with this key and identical
values are considered to be in the same topology.
We consider each <key, value> as a "bucket", and
try to put balanced number of pods into each bucket.
We define a domain as a particular instance of a
topology. Also, we define an eligible domain as
a domain whose nodes meet the requirements of nodeAffinityPolicy
and nodeTaintsPolicy. e.g. If TopologyKey is "kubernetes.io/hostname",
each Node is a domain of that topology. And, if
TopologyKey is "topology.kubernetes.io/zone", each
zone is a domain of that topology. It's a required
field.
type: string
whenUnsatisfiable:
description: 'WhenUnsatisfiable indicates how to deal
with a pod if it doesn''t satisfy the spread constraint.
- DoNotSchedule (default) tells the scheduler not
to schedule it. - ScheduleAnyway tells the scheduler
to schedule the pod in any location, but giving
higher precedence to topologies that would help
reduce the skew. A constraint is considered "Unsatisfiable"
for an incoming pod if and only if every possible
node assignment for that pod would violate "MaxSkew"
on some topology. For example, in a 3-zone cluster,
MaxSkew is set to 1, and pods with the same labelSelector
spread as 3/1/1: | zone1 | zone2 | zone3 | | P P
P | P | P | If WhenUnsatisfiable is set
to DoNotSchedule, incoming pod can only be scheduled
to zone2(zone3) to become 3/2/1(3/1/2) as ActualSkew(2-1)
on zone2(zone3) satisfies MaxSkew(1). In other words,
the cluster can still be imbalanced, but scheduler
won''t make it *more* imbalanced. It''s a required
field.'
type: string
required:
- maxSkew
- topologyKey
- whenUnsatisfiable
type: object
type: array
x-kubernetes-list-map-keys:
- topologyKey
- whenUnsatisfiable
x-kubernetes-list-type: map
volumes:
description: List of volumes that can be mounted by disks
belonging to the vmi.
items:
description: Volume represents a named volume in a vmi.
properties:
cloudInitConfigDrive:
description: 'CloudInitConfigDrive represents a cloud-init
Config Drive user-data source. The Config Drive
data will be added as a disk to the vmi. A proper
cloud-init installation is required inside the guest.
More info: https://cloudinit.readthedocs.io/en/latest/topics/datasources/configdrive.html'
properties:
networkData:
description: NetworkData contains config drive
inline cloud-init networkdata.
type: string
networkDataBase64:
description: NetworkDataBase64 contains config
drive cloud-init networkdata as a base64 encoded
string.
type: string
networkDataSecretRef:
description: NetworkDataSecretRef references a
k8s secret that contains config drive networkdata.
properties:
name:
description: 'Name of the referent. More info:
https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion,
kind, uid?'
type: string
type: object
secretRef:
description: UserDataSecretRef references a k8s
secret that contains config drive userdata.
properties:
name:
description: 'Name of the referent. More info:
https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion,
kind, uid?'
type: string
type: object
userData:
description: UserData contains config drive inline
cloud-init userdata.
type: string
userDataBase64:
description: UserDataBase64 contains config drive
cloud-init userdata as a base64 encoded string.
type: string
type: object
cloudInitNoCloud:
description: 'CloudInitNoCloud represents a cloud-init
NoCloud user-data source. The NoCloud data will
be added as a disk to the vmi. A proper cloud-init
installation is required inside the guest. More
info: http://cloudinit.readthedocs.io/en/latest/topics/datasources/nocloud.html'
properties:
networkData:
description: NetworkData contains NoCloud inline
cloud-init networkdata.
type: string
networkDataBase64:
description: NetworkDataBase64 contains NoCloud
cloud-init networkdata as a base64 encoded string.
type: string
networkDataSecretRef:
description: NetworkDataSecretRef references a
k8s secret that contains NoCloud networkdata.
properties:
name:
description: 'Name of the referent. More info:
https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion,
kind, uid?'
type: string
type: object
secretRef:
description: UserDataSecretRef references a k8s
secret that contains NoCloud userdata.
properties:
name:
description: 'Name of the referent. More info:
https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion,
kind, uid?'
type: string
type: object
userData:
description: UserData contains NoCloud inline
cloud-init userdata.
type: string
userDataBase64:
description: UserDataBase64 contains NoCloud cloud-init
userdata as a base64 encoded string.
type: string
type: object
configMap:
description: 'ConfigMapSource represents a reference
to a ConfigMap in the same namespace. More info:
https://kubernetes.io/docs/tasks/configure-pod-container/configure-pod-configmap/'
properties:
name:
description: 'Name of the referent. More info:
https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind,
uid?'
type: string
optional:
description: Specify whether the ConfigMap or
it's keys must be defined
type: boolean
volumeLabel:
description: The volume label of the resulting
disk inside the VMI. Different bootstrapping
mechanisms require different values. Typical
values are "cidata" (cloud-init), "config-2"
(cloud-init) or "OEMDRV" (kickstart).
type: string
type: object
containerDisk:
description: 'ContainerDisk references a docker image,
embedding a qcow or raw disk. More info: https://kubevirt.gitbooks.io/user-guide/registry-disk.html'
properties:
image:
description: Image is the name of the image with
the embedded disk.
type: string
imagePullPolicy:
description: 'Image pull policy. One of Always,
Never, IfNotPresent. Defaults to Always if :latest
tag is specified, or IfNotPresent otherwise.
Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images'
type: string
imagePullSecret:
description: ImagePullSecret is the name of the
Docker registry secret required to pull the
image. The secret must already exist.
type: string
path:
description: Path defines the path to disk file
in the container
type: string
required:
- image
type: object
dataVolume:
description: DataVolume represents the dynamic creation
a PVC for this volume as well as the process of
populating that PVC with a disk image.
properties:
hotpluggable:
description: Hotpluggable indicates whether the
volume can be hotplugged and hotunplugged.
type: boolean
name:
description: Name of both the DataVolume and the
PVC in the same namespace. After PVC population
the DataVolume is garbage collected by default.
type: string
required:
- name
type: object
downwardAPI:
description: DownwardAPI represents downward API about
the pod that should populate this volume
properties:
fields:
description: Fields is a list of downward API
volume file
items:
description: DownwardAPIVolumeFile represents
information to create the file containing
the pod field
properties:
fieldRef:
description: 'Required: Selects a field
of the pod: only annotations, labels,
name and namespace are supported.'
properties:
apiVersion:
description: Version of the schema the
FieldPath is written in terms of,
defaults to "v1".
type: string
fieldPath:
description: Path of the field to select
in the specified API version.
type: string
required:
- fieldPath
type: object
mode:
description: 'Optional: mode bits used to
set permissions on this file, must be
an octal value between 0000 and 0777 or
a decimal value between 0 and 511. YAML
accepts both octal and decimal values,
JSON requires decimal values for mode
bits. If not specified, the volume defaultMode
will be used. This might be in conflict
with other options that affect the file
mode, like fsGroup, and the result can
be other mode bits set.'
format: int32
type: integer
path:
description: 'Required: Path is the relative
path name of the file to be created. Must
not be absolute or contain the ''..''
path. Must be utf-8 encoded. The first
item of the relative path must not start
with ''..'''
type: string
resourceFieldRef:
description: 'Selects a resource of the
container: only resources limits and requests
(limits.cpu, limits.memory, requests.cpu
and requests.memory) are currently supported.'
properties:
containerName:
description: 'Container name: required
for volumes, optional for env vars'
type: string
divisor:
anyOf:
- type: integer
- type: string
description: Specifies the output format
of the exposed resources, defaults
to "1"
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
resource:
description: 'Required: resource to
select'
type: string
required:
- resource
type: object
required:
- path
type: object
type: array
volumeLabel:
description: The volume label of the resulting
disk inside the VMI. Different bootstrapping
mechanisms require different values. Typical
values are "cidata" (cloud-init), "config-2"
(cloud-init) or "OEMDRV" (kickstart).
type: string
type: object
downwardMetrics:
description: DownwardMetrics adds a very small disk
to VMIs which contains a limited view of host and
guest metrics. The disk content is compatible with
vhostmd (https://github.com/vhostmd/vhostmd) and
vm-dump-metrics.
type: object
emptyDisk:
description: 'EmptyDisk represents a temporary disk
which shares the vmis lifecycle. More info: https://kubevirt.gitbooks.io/user-guide/disks-and-volumes.html'
properties:
capacity:
anyOf:
- type: integer
- type: string
description: Capacity of the sparse disk.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
required:
- capacity
type: object
ephemeral:
description: Ephemeral is a special volume source
that "wraps" specified source and provides copy-on-write
image on top of it.
properties:
persistentVolumeClaim:
description: 'PersistentVolumeClaimVolumeSource
represents a reference to a PersistentVolumeClaim
in the same namespace. Directly attached to
the vmi via qemu. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
properties:
claimName:
description: 'claimName is the name of a PersistentVolumeClaim
in the same namespace as the pod using this
volume. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
type: string
readOnly:
description: readOnly Will force the ReadOnly
setting in VolumeMounts. Default false.
type: boolean
required:
- claimName
type: object
type: object
hostDisk:
description: HostDisk represents a disk created on
the cluster level
properties:
capacity:
anyOf:
- type: integer
- type: string
description: Capacity of the sparse disk
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
path:
description: The path to HostDisk image located
on the cluster
type: string
shared:
description: Shared indicate whether the path
is shared between nodes
type: boolean
type:
description: Contains information if disk.img
exists or should be created allowed options
are 'Disk' and 'DiskOrCreate'
type: string
required:
- path
- type
type: object
memoryDump:
description: MemoryDump is attached to the virt launcher
and is populated with a memory dump of the vmi
properties:
claimName:
description: 'claimName is the name of a PersistentVolumeClaim
in the same namespace as the pod using this
volume. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
type: string
hotpluggable:
description: Hotpluggable indicates whether the
volume can be hotplugged and hotunplugged.
type: boolean
readOnly:
description: readOnly Will force the ReadOnly
setting in VolumeMounts. Default false.
type: boolean
required:
- claimName
type: object
name:
description: 'Volume''s name. Must be a DNS_LABEL
and unique within the vmi. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names'
type: string
persistentVolumeClaim:
description: 'PersistentVolumeClaimVolumeSource represents
a reference to a PersistentVolumeClaim in the same
namespace. Directly attached to the vmi via qemu.
More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
properties:
claimName:
description: 'claimName is the name of a PersistentVolumeClaim
in the same namespace as the pod using this
volume. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
type: string
hotpluggable:
description: Hotpluggable indicates whether the
volume can be hotplugged and hotunplugged.
type: boolean
readOnly:
description: readOnly Will force the ReadOnly
setting in VolumeMounts. Default false.
type: boolean
required:
- claimName
type: object
secret:
description: 'SecretVolumeSource represents a reference
to a secret data in the same namespace. More info:
https://kubernetes.io/docs/concepts/configuration/secret/'
properties:
optional:
description: Specify whether the Secret or it's
keys must be defined
type: boolean
secretName:
description: 'Name of the secret in the pod''s
namespace to use. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret'
type: string
volumeLabel:
description: The volume label of the resulting
disk inside the VMI. Different bootstrapping
mechanisms require different values. Typical
values are "cidata" (cloud-init), "config-2"
(cloud-init) or "OEMDRV" (kickstart).
type: string
type: object
serviceAccount:
description: 'ServiceAccountVolumeSource represents
a reference to a service account. There can only
be one volume of this type! More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/'
properties:
serviceAccountName:
description: 'Name of the service account in the
pod''s namespace to use. More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/'
type: string
type: object
sysprep:
description: Represents a Sysprep volume source.
properties:
configMap:
description: ConfigMap references a ConfigMap
that contains Sysprep answer file named autounattend.xml
that should be attached as disk of CDROM type.
properties:
name:
description: 'Name of the referent. More info:
https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion,
kind, uid?'
type: string
type: object
secret:
description: Secret references a k8s Secret that
contains Sysprep answer file named autounattend.xml
that should be attached as disk of CDROM type.
properties:
name:
description: 'Name of the referent. More info:
https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion,
kind, uid?'
type: string
type: object
type: object
required:
- name
type: object
type: array
required:
- domain
type: object
type: object
required:
- template
type: object
type: object
required:
- selector
- virtualMachineTemplate
type: object
status:
properties:
conditions:
items:
properties:
lastProbeTime:
format: date-time
nullable: true
type: string
lastTransitionTime:
format: date-time
nullable: true
type: string
message:
type: string
reason:
type: string
status:
type: string
type:
type: string
required:
- status
- type
type: object
type: array
x-kubernetes-list-type: atomic
labelSelector:
description: Canonical form of the label selector for HPA which consumes
it through the scale subresource.
type: string
readyReplicas:
format: int32
type: integer
replicas:
format: int32
type: integer
type: object
required:
- spec
type: object
`,
"virtualmachinepreference": `openAPIV3Schema:
description: VirtualMachinePreference resource contains optional preferences related
to the VirtualMachine.
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest internal
value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this object
represents. Servers may infer this from the endpoint the client submits requests
to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: Required spec describing the preferences
properties:
annotations:
additionalProperties:
type: string
description: Optionally defines preferred Annotations to be applied to the
VirtualMachineInstance
type: object
clock:
description: Clock optionally defines preferences associated with the Clock
attribute of a VirtualMachineInstance DomainSpec
properties:
preferredClockOffset:
description: ClockOffset allows specifying the UTC offset or the timezone
of the guest clock.
properties:
timezone:
description: Timezone sets the guest clock to the specified timezone.
Zone name follows the TZ environment variable format (e.g. 'America/New_York').
type: string
utc:
description: UTC sets the guest clock to UTC on each boot. If an
offset is specified, guest changes to the clock will be kept during
reboots and are not reset.
properties:
offsetSeconds:
description: OffsetSeconds specifies an offset in seconds, relative
to UTC. If set, guest changes to the clock will be kept during
reboots and not reset.
type: integer
type: object
type: object
preferredTimer:
description: Timer specifies whih timers are attached to the vmi.
properties:
hpet:
description: HPET (High Precision Event Timer) - multiple timers
with periodic interrupts.
properties:
present:
description: Enabled set to false makes sure that the machine
type or a preset can't add the timer. Defaults to true.
type: boolean
tickPolicy:
description: TickPolicy determines what happens when QEMU misses
a deadline for injecting a tick to the guest. One of "delay",
"catchup", "merge", "discard".
type: string
type: object
hyperv:
description: Hyperv (Hypervclock) - lets guests read the host’s
wall clock time (paravirtualized). For windows guests.
properties:
present:
description: Enabled set to false makes sure that the machine
type or a preset can't add the timer. Defaults to true.
type: boolean
type: object
kvm:
description: "KVM \t(KVM clock) - lets guests read the host’s wall
clock time (paravirtualized). For linux guests."
properties:
present:
description: Enabled set to false makes sure that the machine
type or a preset can't add the timer. Defaults to true.
type: boolean
type: object
pit:
description: PIT (Programmable Interval Timer) - a timer with periodic
interrupts.
properties:
present:
description: Enabled set to false makes sure that the machine
type or a preset can't add the timer. Defaults to true.
type: boolean
tickPolicy:
description: TickPolicy determines what happens when QEMU misses
a deadline for injecting a tick to the guest. One of "delay",
"catchup", "discard".
type: string
type: object
rtc:
description: RTC (Real Time Clock) - a continuously running timer
with periodic interrupts.
properties:
present:
description: Enabled set to false makes sure that the machine
type or a preset can't add the timer. Defaults to true.
type: boolean
tickPolicy:
description: TickPolicy determines what happens when QEMU misses
a deadline for injecting a tick to the guest. One of "delay",
"catchup".
type: string
track:
description: Track the guest or the wall clock.
type: string
type: object
type: object
type: object
cpu:
description: CPU optionally defines preferences associated with the CPU
attribute of a VirtualMachineInstance DomainSpec
properties:
preferredCPUFeatures:
description: PreferredCPUFeatures optionally defines a slice of preferred
CPU features.
items:
description: CPUFeature allows specifying a CPU feature.
properties:
name:
description: Name of the CPU feature
type: string
policy:
description: 'Policy is the CPU feature attribute which can have
the following attributes: force - The virtual CPU will claim
the feature is supported regardless of it being supported by
host CPU. require - Guest creation will fail unless the feature
is supported by the host CPU or the hypervisor is able to emulate
it. optional - The feature will be supported by virtual CPU
if and only if it is supported by host CPU. disable - The feature
will not be supported by virtual CPU. forbid - Guest creation
will fail if the feature is supported by host CPU. Defaults
to require'
type: string
required:
- name
type: object
type: array
preferredCPUTopology:
description: PreferredCPUTopology optionally defines the preferred guest
visible CPU topology, defaults to PreferSockets.
type: string
type: object
devices:
description: Devices optionally defines preferences associated with the
Devices attribute of a VirtualMachineInstance DomainSpec
properties:
preferredAutoattachGraphicsDevice:
description: PreferredAutoattachGraphicsDevice optionally defines the
preferred value of AutoattachGraphicsDevice
type: boolean
preferredAutoattachInputDevice:
description: PreferredAutoattachInputDevice optionally defines the preferred
value of AutoattachInputDevice
type: boolean
preferredAutoattachMemBalloon:
description: PreferredAutoattachMemBalloon optionally defines the preferred
value of AutoattachMemBalloon
type: boolean
preferredAutoattachPodInterface:
description: PreferredAutoattachPodInterface optionally defines the
preferred value of AutoattachPodInterface
type: boolean
preferredAutoattachSerialConsole:
description: PreferredAutoattachSerialConsole optionally defines the
preferred value of AutoattachSerialConsole
type: boolean
preferredBlockMultiQueue:
description: PreferredBlockMultiQueue optionally enables the vhost multiqueue
feature for virtio disks.
type: boolean
preferredCdromBus:
description: PreferredCdromBus optionally defines the preferred bus
for Cdrom Disk devices.
type: string
preferredDisableHotplug:
description: PreferredDisableHotplug optionally defines the preferred
value of DisableHotplug
type: boolean
preferredDiskBlockSize:
description: PreferredBlockSize optionally defines the block size of
Disk devices.
properties:
custom:
description: CustomBlockSize represents the desired logical and
physical block size for a VM disk.
properties:
logical:
type: integer
physical:
type: integer
required:
- logical
- physical
type: object
matchVolume:
description: Represents if a feature is enabled or disabled.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
type: object
preferredDiskBus:
description: PreferredDiskBus optionally defines the preferred bus for
Disk Disk devices.
type: string
preferredDiskCache:
description: PreferredCache optionally defines the DriverCache to be
used by Disk devices.
type: string
preferredDiskDedicatedIoThread:
description: PreferredDedicatedIoThread optionally enables dedicated
IO threads for Disk devices.
type: boolean
preferredDiskIO:
description: PreferredIo optionally defines the QEMU disk IO mode to
be used by Disk devices.
type: string
preferredInputBus:
description: PreferredInputBus optionally defines the preferred bus
for Input devices.
type: string
preferredInputType:
description: PreferredInputType optionally defines the preferred type
for Input devices.
type: string
preferredInterfaceMasquerade:
description: PreferredInterfaceMasquerade optionally defines the preferred
masquerade configuration to use with each network interface.
type: object
preferredInterfaceModel:
description: PreferredInterfaceModel optionally defines the preferred
model to be used by Interface devices.
type: string
preferredLunBus:
description: PreferredLunBus optionally defines the preferred bus for
Lun Disk devices.
type: string
preferredNetworkInterfaceMultiQueue:
description: PreferredNetworkInterfaceMultiQueue optionally enables
the vhost multiqueue feature for virtio interfaces.
type: boolean
preferredRng:
description: PreferredRng optionally defines the preferred rng device
to be used.
type: object
preferredSoundModel:
description: PreferredSoundModel optionally defines the preferred model
for Sound devices.
type: string
preferredTPM:
description: PreferredTPM optionally defines the preferred TPM device
to be used.
properties:
persistent:
description: Persistent indicates the state of the TPM device should
be kept accross reboots Defaults to false
type: boolean
type: object
preferredUseVirtioTransitional:
description: PreferredUseVirtioTransitional optionally defines the preferred
value of UseVirtioTransitional
type: boolean
preferredVirtualGPUOptions:
description: PreferredVirtualGPUOptions optionally defines the preferred
value of VirtualGPUOptions
properties:
display:
properties:
enabled:
description: Enabled determines if a display addapter backed
by a vGPU should be enabled or disabled on the guest. Defaults
to true.
type: boolean
ramFB:
description: Enables a boot framebuffer, until the guest OS
loads a real GPU driver Defaults to true.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
type: object
type: object
type: object
features:
description: Features optionally defines preferences associated with the
Features attribute of a VirtualMachineInstance DomainSpec
properties:
preferredAcpi:
description: PreferredAcpi optionally enables the ACPI feature
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
preferredApic:
description: PreferredApic optionally enables and configures the APIC
feature
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
endOfInterrupt:
description: EndOfInterrupt enables the end of interrupt notification
in the guest. Defaults to false.
type: boolean
type: object
preferredHyperv:
description: PreferredHyperv optionally enables and configures HyperV
features
properties:
evmcs:
description: EVMCS Speeds up L2 vmexits, but disables other virtualization
features. Requires vapic. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
frequencies:
description: Frequencies improves the TSC clock source handling
for Hyper-V on KVM. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
ipi:
description: IPI improves performances in overcommited environments.
Requires vpindex. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
reenlightenment:
description: Reenlightenment enables the notifications on TSC frequency
changes. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
relaxed:
description: Relaxed instructs the guest OS to disable watchdog
timeouts. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
reset:
description: Reset enables Hyperv reboot/reset for the vmi. Requires
synic. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
runtime:
description: Runtime improves the time accounting to improve scheduling
in the guest. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
spinlocks:
description: Spinlocks allows to configure the spinlock retry attempts.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
spinlocks:
description: Retries indicates the number of retries. Must be
a value greater or equal 4096. Defaults to 4096.
format: int32
type: integer
type: object
synic:
description: SyNIC enables the Synthetic Interrupt Controller. Defaults
to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
synictimer:
description: SyNICTimer enables Synthetic Interrupt Controller Timers,
reducing CPU load. Defaults to the machine type setting.
properties:
direct:
description: Represents if a feature is enabled or disabled.
properties:
enabled:
description: Enabled determines if the feature should be
enabled or disabled on the guest. Defaults to true.
type: boolean
type: object
enabled:
type: boolean
type: object
tlbflush:
description: TLBFlush improves performances in overcommited environments.
Requires vpindex. Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
vapic:
description: VAPIC improves the paravirtualized handling of interrupts.
Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
vendorid:
description: VendorID allows setting the hypervisor vendor id. Defaults
to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
vendorid:
description: VendorID sets the hypervisor vendor id, visible
to the vmi. String up to twelve characters.
type: string
type: object
vpindex:
description: VPIndex enables the Virtual Processor Index to help
windows identifying virtual processors. Defaults to the machine
type setting.
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
type: object
preferredKvm:
description: PreferredKvm optionally enables and configures KVM features
properties:
hidden:
description: Hide the KVM hypervisor from standard MSR based discovery.
Defaults to false
type: boolean
type: object
preferredPvspinlock:
description: PreferredPvspinlock optionally enables the Pvspinlock feature
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
preferredSmm:
description: PreferredSmm optionally enables the SMM feature
properties:
enabled:
description: Enabled determines if the feature should be enabled
or disabled on the guest. Defaults to true.
type: boolean
type: object
type: object
firmware:
description: Firmware optionally defines preferences associated with the
Firmware attribute of a VirtualMachineInstance DomainSpec
properties:
preferredUseBios:
description: PreferredUseBios optionally enables BIOS
type: boolean
preferredUseBiosSerial:
description: "PreferredUseBiosSerial optionally transmitts BIOS output
over the serial. \n Requires PreferredUseBios to be enabled."
type: boolean
preferredUseEfi:
description: PreferredUseEfi optionally enables EFI
type: boolean
preferredUseSecureBoot:
description: "PreferredUseSecureBoot optionally enables SecureBoot and
the OVMF roms will be swapped for SecureBoot-enabled ones. \n Requires
PreferredUseEfi and PreferredSmm to be enabled."
type: boolean
type: object
machine:
description: Machine optionally defines preferences associated with the
Machine attribute of a VirtualMachineInstance DomainSpec
properties:
preferredMachineType:
description: PreferredMachineType optionally defines the preferred machine
type to use.
type: string
type: object
preferSpreadSocketToCoreRatio:
description: PreferSpreadSocketToCoreRatio defines the ratio to spread vCPUs
between cores and sockets, it defaults to 2.
format: int32
type: integer
preferredSubdomain:
description: Subdomain of the VirtualMachineInstance
type: string
preferredTerminationGracePeriodSeconds:
description: Grace period observed after signalling a VirtualMachineInstance
to stop after which the VirtualMachineInstance is force terminated.
format: int64
type: integer
requirements:
description: Requirements defines the minium amount of instance type defined
resources required by a set of preferences
properties:
cpu:
description: Required CPU related attributes of the instancetype.
properties:
guest:
description: Minimal number of vCPUs required by the preference.
format: int32
type: integer
required:
- guest
type: object
memory:
description: Required Memory related attributes of the instancetype.
properties:
guest:
anyOf:
- type: integer
- type: string
description: Minimal amount of memory required by the preference.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
required:
- guest
type: object
type: object
volumes:
description: Volumes optionally defines preferences associated with the
Volumes attribute of a VirtualMachineInstace DomainSpec
properties:
preferredStorageClassName:
description: PreffereedStorageClassName optionally defines the preferred
storageClass
type: string
type: object
type: object
required:
- spec
type: object
`,
"virtualmachinerestore": `openAPIV3Schema:
description: VirtualMachineRestore defines the operation of restoring a VM
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest internal
value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this object
represents. Servers may infer this from the endpoint the client submits requests
to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: VirtualMachineRestoreSpec is the spec for a VirtualMachineRestoreresource
properties:
patches:
description: "If the target for the restore does not exist, it will be created.
Patches holds JSON patches that would be applied to the target manifest
before it's created. Patches should fit the target's Kind. \n Example
for a patch: {\"op\": \"replace\", \"path\": \"/metadata/name\", \"value\":
\"new-vm-name\"}"
items:
type: string
type: array
x-kubernetes-list-type: atomic
target:
description: initially only VirtualMachine type supported
properties:
apiGroup:
description: APIGroup is the group for the resource being referenced.
If APIGroup is not specified, the specified Kind must be in the core
API group. For any other third-party types, APIGroup is required.
type: string
kind:
description: Kind is the type of resource being referenced
type: string
name:
description: Name is the name of resource being referenced
type: string
required:
- kind
- name
type: object
virtualMachineSnapshotName:
type: string
required:
- target
- virtualMachineSnapshotName
type: object
status:
description: VirtualMachineRestoreStatus is the spec for a VirtualMachineRestoreresource
properties:
complete:
type: boolean
conditions:
items:
description: Condition defines conditions
properties:
lastProbeTime:
format: date-time
nullable: true
type: string
lastTransitionTime:
format: date-time
nullable: true
type: string
message:
type: string
reason:
type: string
status:
type: string
type:
description: ConditionType is the const type for Conditions
type: string
required:
- status
- type
type: object
type: array
deletedDataVolumes:
items:
type: string
type: array
restoreTime:
format: date-time
type: string
restores:
items:
description: VolumeRestore contains the data neeed to restore a PVC
properties:
dataVolumeName:
type: string
persistentVolumeClaim:
type: string
volumeName:
type: string
volumeSnapshotName:
type: string
required:
- persistentVolumeClaim
- volumeName
- volumeSnapshotName
type: object
type: array
type: object
required:
- spec
type: object
`,
"virtualmachinesnapshot": `openAPIV3Schema:
description: VirtualMachineSnapshot defines the operation of snapshotting a VM
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest internal
value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this object
represents. Servers may infer this from the endpoint the client submits requests
to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: VirtualMachineSnapshotSpec is the spec for a VirtualMachineSnapshot
resource
properties:
deletionPolicy:
description: DeletionPolicy defines that to do with VirtualMachineSnapshot
when VirtualMachineSnapshot is deleted
type: string
failureDeadline:
description: This time represents the number of seconds we permit the vm
snapshot to take. In case we pass this deadline we mark this snapshot
as failed. Defaults to DefaultFailureDeadline - 5min
type: string
source:
description: TypedLocalObjectReference contains enough information to let
you locate the typed referenced object inside the same namespace.
properties:
apiGroup:
description: APIGroup is the group for the resource being referenced.
If APIGroup is not specified, the specified Kind must be in the core
API group. For any other third-party types, APIGroup is required.
type: string
kind:
description: Kind is the type of resource being referenced
type: string
name:
description: Name is the name of resource being referenced
type: string
required:
- kind
- name
type: object
required:
- source
type: object
status:
description: VirtualMachineSnapshotStatus is the status for a VirtualMachineSnapshot
resource
properties:
conditions:
items:
description: Condition defines conditions
properties:
lastProbeTime:
format: date-time
nullable: true
type: string
lastTransitionTime:
format: date-time
nullable: true
type: string
message:
type: string
reason:
type: string
status:
type: string
type:
description: ConditionType is the const type for Conditions
type: string
required:
- status
- type
type: object
type: array
creationTime:
format: date-time
nullable: true
type: string
error:
description: Error is the last error encountered during the snapshot/restore
properties:
message:
type: string
time:
format: date-time
type: string
type: object
indications:
items:
description: Indication is a way to indicate the state of the vm when
taking the snapshot
type: string
type: array
x-kubernetes-list-type: set
phase:
description: VirtualMachineSnapshotPhase is the current phase of the VirtualMachineSnapshot
type: string
readyToUse:
type: boolean
snapshotVolumes:
description: SnapshotVolumesLists includes the list of volumes which were
included in the snapshot and volumes which were excluded from the snapshot
properties:
excludedVolumes:
items:
type: string
type: array
x-kubernetes-list-type: set
includedVolumes:
items:
type: string
type: array
x-kubernetes-list-type: set
type: object
sourceUID:
description: UID is a type that holds unique ID values, including UUIDs. Because
we don't ONLY use UUIDs, this is an alias to string. Being a type captures
intent and helps make sure that UIDs and names do not get conflated.
type: string
virtualMachineSnapshotContentName:
type: string
type: object
required:
- spec
type: object
`,
"virtualmachinesnapshotcontent": `openAPIV3Schema:
description: VirtualMachineSnapshotContent contains the snapshot data
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest internal
value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this object
represents. Servers may infer this from the endpoint the client submits requests
to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: VirtualMachineSnapshotContentSpec is the spec for a VirtualMachineSnapshotContent
resource
properties:
source:
description: SourceSpec contains the appropriate spec for the resource being
snapshotted
properties:
virtualMachine:
properties:
metadata:
nullable: true
type: object
x-kubernetes-preserve-unknown-fields: true
spec:
description: VirtualMachineSpec contains the VirtualMachine specification.
properties:
dataVolumeTemplates:
description: dataVolumeTemplates is a list of dataVolumes that
the VirtualMachineInstance template can reference. DataVolumes
in this list are dynamically created for the VirtualMachine
and are tied to the VirtualMachine's life-cycle.
items:
nullable: true
properties:
apiVersion:
description: 'APIVersion defines the versioned schema
of this representation of an object. Servers should
convert recognized schemas to the latest internal value,
and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the
REST resource this object represents. Servers may infer
this from the endpoint the client submits requests to.
Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
nullable: true
type: object
x-kubernetes-preserve-unknown-fields: true
spec:
description: DataVolumeSpec contains the DataVolume specification.
properties:
checkpoints:
description: Checkpoints is a list of DataVolumeCheckpoints,
representing stages in a multistage import.
items:
description: DataVolumeCheckpoint defines a stage
in a warm migration.
properties:
current:
description: Current is the identifier of the
snapshot created for this checkpoint.
type: string
previous:
description: Previous is the identifier of the
snapshot from the previous checkpoint.
type: string
required:
- current
- previous
type: object
type: array
contentType:
description: 'DataVolumeContentType options: "kubevirt",
"archive"'
enum:
- kubevirt
- archive
type: string
finalCheckpoint:
description: FinalCheckpoint indicates whether the
current DataVolumeCheckpoint is the final checkpoint.
type: boolean
preallocation:
description: Preallocation controls whether storage
for DataVolumes should be allocated in advance.
type: boolean
priorityClassName:
description: PriorityClassName for Importer, Cloner
and Uploader pod
type: string
pvc:
description: PVC is the PVC specification
properties:
accessModes:
description: 'accessModes contains the desired
access modes the volume should have. More info:
https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1'
items:
type: string
type: array
dataSource:
description: 'dataSource field can be used to
specify either: * An existing VolumeSnapshot
object (snapshot.storage.k8s.io/VolumeSnapshot)
* An existing PVC (PersistentVolumeClaim) If
the provisioner or an external controller can
support the specified data source, it will create
a new volume based on the contents of the specified
data source. When the AnyVolumeDataSource feature
gate is enabled, dataSource contents will be
copied to dataSourceRef, and dataSourceRef contents
will be copied to dataSource when dataSourceRef.namespace
is not specified. If the namespace is specified,
then dataSourceRef will not be copied to dataSource.'
properties:
apiGroup:
description: APIGroup is the group for the
resource being referenced. If APIGroup is
not specified, the specified Kind must be
in the core API group. For any other third-party
types, APIGroup is required.
type: string
kind:
description: Kind is the type of resource
being referenced
type: string
name:
description: Name is the name of resource
being referenced
type: string
required:
- kind
- name
type: object
dataSourceRef:
description: 'dataSourceRef specifies the object
from which to populate the volume with data,
if a non-empty volume is desired. This may be
any object from a non-empty API group (non core
object) or a PersistentVolumeClaim object. When
this field is specified, volume binding will
only succeed if the type of the specified object
matches some installed volume populator or dynamic
provisioner. This field will replace the functionality
of the dataSource field and as such if both
fields are non-empty, they must have the same
value. For backwards compatibility, when namespace
isn''t specified in dataSourceRef, both fields
(dataSource and dataSourceRef) will be set to
the same value automatically if one of them
is empty and the other is non-empty. When namespace
is specified in dataSourceRef, dataSource isn''t
set to the same value and must be empty. There
are three important differences between dataSource
and dataSourceRef: * While dataSource only allows
two specific types of objects, dataSourceRef allows
any non-core object, as well as PersistentVolumeClaim
objects. * While dataSource ignores disallowed
values (dropping them), dataSourceRef preserves
all values, and generates an error if a disallowed
value is specified. * While dataSource only
allows local objects, dataSourceRef allows objects in
any namespaces. (Beta) Using this field requires
the AnyVolumeDataSource feature gate to be enabled.
(Alpha) Using the namespace field of dataSourceRef
requires the CrossNamespaceVolumeDataSource
feature gate to be enabled.'
properties:
apiGroup:
description: APIGroup is the group for the
resource being referenced. If APIGroup is
not specified, the specified Kind must be
in the core API group. For any other third-party
types, APIGroup is required.
type: string
kind:
description: Kind is the type of resource
being referenced
type: string
name:
description: Name is the name of resource
being referenced
type: string
namespace:
description: Namespace is the namespace of
resource being referenced Note that when
a namespace is specified, a gateway.networking.k8s.io/ReferenceGrant
object is required in the referent namespace
to allow that namespace's owner to accept
the reference. See the ReferenceGrant documentation
for details. (Alpha) This field requires
the CrossNamespaceVolumeDataSource feature
gate to be enabled.
type: string
required:
- kind
- name
type: object
resources:
description: 'resources represents the minimum
resources the volume should have. If RecoverVolumeExpansionFailure
feature is enabled users are allowed to specify
resource requirements that are lower than previous
value but must still be higher than capacity
recorded in the status field of the claim. More
info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources'
properties:
claims:
description: "Claims lists the names of resources,
defined in spec.resourceClaims, that are
used by this container. \n This is an alpha
field and requires enabling the DynamicResourceAllocation
feature gate. \n This field is immutable.
It can only be set for containers."
items:
description: ResourceClaim references one
entry in PodSpec.ResourceClaims.
properties:
name:
description: Name must match the name
of one entry in pod.spec.resourceClaims
of the Pod where this field is used.
It makes that resource available inside
a container.
type: string
required:
- name
type: object
type: array
x-kubernetes-list-map-keys:
- name
x-kubernetes-list-type: map
limits:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: 'Limits describes the maximum
amount of compute resources allowed. More
info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
type: object
requests:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: 'Requests describes the minimum
amount of compute resources required. If
Requests is omitted for a container, it
defaults to Limits if that is explicitly
specified, otherwise to an implementation-defined
value. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
type: object
type: object
selector:
description: selector is a label query over volumes
to consider for binding.
properties:
matchExpressions:
description: matchExpressions is a list of
label selector requirements. The requirements
are ANDed.
items:
description: A label selector requirement
is a selector that contains values, a
key, and an operator that relates the
key and values.
properties:
key:
description: key is the label key that
the selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty.
If the operator is Exists or DoesNotExist,
the values array must be empty. This
array is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is
"In", and the values array contains only
"value". The requirements are ANDed.
type: object
type: object
storageClassName:
description: 'storageClassName is the name of
the StorageClass required by the claim. More
info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#class-1'
type: string
volumeMode:
description: volumeMode defines what type of volume
is required by the claim. Value of Filesystem
is implied when not included in claim spec.
type: string
volumeName:
description: volumeName is the binding reference
to the PersistentVolume backing this claim.
type: string
type: object
source:
description: Source is the src of the data for the
requested DataVolume
properties:
blank:
description: DataVolumeBlankImage provides the
parameters to create a new raw blank image for
the PVC
type: object
gcs:
description: DataVolumeSourceGCS provides the
parameters to create a Data Volume from an GCS
source
properties:
secretRef:
description: SecretRef provides the secret
reference needed to access the GCS source
type: string
url:
description: URL is the url of the GCS source
type: string
required:
- url
type: object
http:
description: DataVolumeSourceHTTP can be either
an http or https endpoint, with an optional
basic auth user name and password, and an optional
configmap containing additional CAs
properties:
certConfigMap:
description: CertConfigMap is a configmap
reference, containing a Certificate Authority(CA)
public key, and a base64 encoded pem certificate
type: string
extraHeaders:
description: ExtraHeaders is a list of strings
containing extra headers to include with
HTTP transfer requests
items:
type: string
type: array
secretExtraHeaders:
description: SecretExtraHeaders is a list
of Secret references, each containing an
extra HTTP header that may include sensitive
information
items:
type: string
type: array
secretRef:
description: SecretRef A Secret reference,
the secret should contain accessKeyId (user
name) base64 encoded, and secretKey (password)
also base64 encoded
type: string
url:
description: URL is the URL of the http(s)
endpoint
type: string
required:
- url
type: object
imageio:
description: DataVolumeSourceImageIO provides
the parameters to create a Data Volume from
an imageio source
properties:
certConfigMap:
description: CertConfigMap provides a reference
to the CA cert
type: string
diskId:
description: DiskID provides id of a disk
to be imported
type: string
secretRef:
description: SecretRef provides the secret
reference needed to access the ovirt-engine
type: string
url:
description: URL is the URL of the ovirt-engine
type: string
required:
- diskId
- url
type: object
pvc:
description: DataVolumeSourcePVC provides the
parameters to create a Data Volume from an existing
PVC
properties:
name:
description: The name of the source PVC
type: string
namespace:
description: The namespace of the source PVC
type: string
required:
- name
- namespace
type: object
registry:
description: DataVolumeSourceRegistry provides
the parameters to create a Data Volume from
an registry source
properties:
certConfigMap:
description: CertConfigMap provides a reference
to the Registry certs
type: string
imageStream:
description: ImageStream is the name of image
stream for import
type: string
pullMethod:
description: PullMethod can be either "pod"
(default import), or "node" (node docker
cache based import)
type: string
secretRef:
description: SecretRef provides the secret
reference needed to access the Registry
source
type: string
url:
description: 'URL is the url of the registry
source (starting with the scheme: docker,
oci-archive)'
type: string
type: object
s3:
description: DataVolumeSourceS3 provides the parameters
to create a Data Volume from an S3 source
properties:
certConfigMap:
description: CertConfigMap is a configmap
reference, containing a Certificate Authority(CA)
public key, and a base64 encoded pem certificate
type: string
secretRef:
description: SecretRef provides the secret
reference needed to access the S3 source
type: string
url:
description: URL is the url of the S3 source
type: string
required:
- url
type: object
snapshot:
description: DataVolumeSourceSnapshot provides
the parameters to create a Data Volume from
an existing VolumeSnapshot
properties:
name:
description: The name of the source VolumeSnapshot
type: string
namespace:
description: The namespace of the source VolumeSnapshot
type: string
required:
- name
- namespace
type: object
upload:
description: DataVolumeSourceUpload provides the
parameters to create a Data Volume by uploading
the source
type: object
vddk:
description: DataVolumeSourceVDDK provides the
parameters to create a Data Volume from a Vmware
source
properties:
backingFile:
description: BackingFile is the path to the
virtual hard disk to migrate from vCenter/ESXi
type: string
initImageURL:
description: InitImageURL is an optional URL
to an image containing an extracted VDDK
library, overrides v2v-vmware config map
type: string
secretRef:
description: SecretRef provides a reference
to a secret containing the username and
password needed to access the vCenter or
ESXi host
type: string
thumbprint:
description: Thumbprint is the certificate
thumbprint of the vCenter or ESXi host
type: string
url:
description: URL is the URL of the vCenter
or ESXi host with the VM to migrate
type: string
uuid:
description: UUID is the UUID of the virtual
machine that the backing file is attached
to in vCenter/ESXi
type: string
type: object
type: object
sourceRef:
description: SourceRef is an indirect reference to
the source of data for the requested DataVolume
properties:
kind:
description: The kind of the source reference,
currently only "DataSource" is supported
type: string
name:
description: The name of the source reference
type: string
namespace:
description: The namespace of the source reference,
defaults to the DataVolume namespace
type: string
required:
- kind
- name
type: object
storage:
description: Storage is the requested storage specification
properties:
accessModes:
description: 'AccessModes contains the desired
access modes the volume should have. More info:
https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1'
items:
type: string
type: array
dataSource:
description: 'This field can be used to specify
either: * An existing VolumeSnapshot object
(snapshot.storage.k8s.io/VolumeSnapshot) * An
existing PVC (PersistentVolumeClaim) * An existing
custom resource that implements data population
(Alpha) In order to use custom resource types
that implement data population, the AnyVolumeDataSource
feature gate must be enabled. If the provisioner
or an external controller can support the specified
data source, it will create a new volume based
on the contents of the specified data source.
If the AnyVolumeDataSource feature gate is enabled,
this field will always have the same contents
as the DataSourceRef field.'
properties:
apiGroup:
description: APIGroup is the group for the
resource being referenced. If APIGroup is
not specified, the specified Kind must be
in the core API group. For any other third-party
types, APIGroup is required.
type: string
kind:
description: Kind is the type of resource
being referenced
type: string
name:
description: Name is the name of resource
being referenced
type: string
required:
- kind
- name
type: object
dataSourceRef:
description: 'Specifies the object from which
to populate the volume with data, if a non-empty
volume is desired. This may be any local object
from a non-empty API group (non core object)
or a PersistentVolumeClaim object. When this
field is specified, volume binding will only
succeed if the type of the specified object
matches some installed volume populator or dynamic
provisioner. This field will replace the functionality
of the DataSource field and as such if both
fields are non-empty, they must have the same
value. For backwards compatibility, both fields
(DataSource and DataSourceRef) will be set to
the same value automatically if one of them
is empty and the other is non-empty. There are
two important differences between DataSource
and DataSourceRef: * While DataSource only allows
two specific types of objects, DataSourceRef
allows any non-core object, as well as PersistentVolumeClaim
objects. * While DataSource ignores disallowed
values (dropping them), DataSourceRef preserves
all values, and generates an error if a disallowed
value is specified. (Beta) Using this field
requires the AnyVolumeDataSource feature gate
to be enabled.'
properties:
apiGroup:
description: APIGroup is the group for the
resource being referenced. If APIGroup is
not specified, the specified Kind must be
in the core API group. For any other third-party
types, APIGroup is required.
type: string
kind:
description: Kind is the type of resource
being referenced
type: string
name:
description: Name is the name of resource
being referenced
type: string
namespace:
description: Namespace is the namespace of
resource being referenced Note that when
a namespace is specified, a gateway.networking.k8s.io/ReferenceGrant
object is required in the referent namespace
to allow that namespace's owner to accept
the reference. See the ReferenceGrant documentation
for details. (Alpha) This field requires
the CrossNamespaceVolumeDataSource feature
gate to be enabled.
type: string
required:
- kind
- name
type: object
resources:
description: 'Resources represents the minimum
resources the volume should have. More info:
https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources'
properties:
claims:
description: "Claims lists the names of resources,
defined in spec.resourceClaims, that are
used by this container. \n This is an alpha
field and requires enabling the DynamicResourceAllocation
feature gate. \n This field is immutable.
It can only be set for containers."
items:
description: ResourceClaim references one
entry in PodSpec.ResourceClaims.
properties:
name:
description: Name must match the name
of one entry in pod.spec.resourceClaims
of the Pod where this field is used.
It makes that resource available inside
a container.
type: string
required:
- name
type: object
type: array
x-kubernetes-list-map-keys:
- name
x-kubernetes-list-type: map
limits:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: 'Limits describes the maximum
amount of compute resources allowed. More
info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
type: object
requests:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: 'Requests describes the minimum
amount of compute resources required. If
Requests is omitted for a container, it
defaults to Limits if that is explicitly
specified, otherwise to an implementation-defined
value. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
type: object
type: object
selector:
description: A label query over volumes to consider
for binding.
properties:
matchExpressions:
description: matchExpressions is a list of
label selector requirements. The requirements
are ANDed.
items:
description: A label selector requirement
is a selector that contains values, a
key, and an operator that relates the
key and values.
properties:
key:
description: key is the label key that
the selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty.
If the operator is Exists or DoesNotExist,
the values array must be empty. This
array is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is
"In", and the values array contains only
"value". The requirements are ANDed.
type: object
type: object
storageClassName:
description: 'Name of the StorageClass required
by the claim. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#class-1'
type: string
volumeMode:
description: volumeMode defines what type of volume
is required by the claim. Value of Filesystem
is implied when not included in claim spec.
type: string
volumeName:
description: VolumeName is the binding reference
to the PersistentVolume backing this claim.
type: string
type: object
type: object
status:
description: DataVolumeTemplateDummyStatus is here simply
for backwards compatibility with a previous API.
nullable: true
type: object
required:
- spec
type: object
type: array
instancetype:
description: InstancetypeMatcher references a instancetype that
is used to fill fields in Template
properties:
inferFromVolume:
description: InferFromVolume lists the name of a volume
that should be used to infer or discover the instancetype
to be used through known annotations on the underlying
resource. Once applied to the InstancetypeMatcher this
field is removed.
type: string
inferFromVolumeFailurePolicy:
description: 'InferFromVolumeFailurePolicy controls what
should happen on failure when inferring the instancetype.
Allowed values are: "RejectInferFromVolumeFailure" and
"IgnoreInferFromVolumeFailure". If not specified, "RejectInferFromVolumeFailure"
is used by default.'
type: string
kind:
description: 'Kind specifies which instancetype resource
is referenced. Allowed values are: "VirtualMachineInstancetype"
and "VirtualMachineClusterInstancetype". If not specified,
"VirtualMachineClusterInstancetype" is used by default.'
type: string
name:
description: Name is the name of the VirtualMachineInstancetype
or VirtualMachineClusterInstancetype
type: string
revisionName:
description: RevisionName specifies a ControllerRevision
containing a specific copy of the VirtualMachineInstancetype
or VirtualMachineClusterInstancetype to be used. This
is initially captured the first time the instancetype
is applied to the VirtualMachineInstance.
type: string
type: object
preference:
description: PreferenceMatcher references a set of preference
that is used to fill fields in Template
properties:
inferFromVolume:
description: InferFromVolume lists the name of a volume
that should be used to infer or discover the preference
to be used through known annotations on the underlying
resource. Once applied to the PreferenceMatcher this field
is removed.
type: string
inferFromVolumeFailurePolicy:
description: 'InferFromVolumeFailurePolicy controls what
should happen on failure when preference the instancetype.
Allowed values are: "RejectInferFromVolumeFailure" and
"IgnoreInferFromVolumeFailure". If not specified, "RejectInferFromVolumeFailure"
is used by default.'
type: string
kind:
description: 'Kind specifies which preference resource is
referenced. Allowed values are: "VirtualMachinePreference"
and "VirtualMachineClusterPreference". If not specified,
"VirtualMachineClusterPreference" is used by default.'
type: string
name:
description: Name is the name of the VirtualMachinePreference
or VirtualMachineClusterPreference
type: string
revisionName:
description: RevisionName specifies a ControllerRevision
containing a specific copy of the VirtualMachinePreference
or VirtualMachineClusterPreference to be used. This is
initially captured the first time the instancetype is
applied to the VirtualMachineInstance.
type: string
type: object
runStrategy:
description: Running state indicates the requested running state
of the VirtualMachineInstance mutually exclusive with Running
type: string
running:
description: Running controls whether the associatied VirtualMachineInstance
is created or not Mutually exclusive with RunStrategy
type: boolean
template:
description: Template is the direct specification of VirtualMachineInstance
properties:
metadata:
nullable: true
type: object
x-kubernetes-preserve-unknown-fields: true
spec:
description: VirtualMachineInstance Spec contains the VirtualMachineInstance
specification.
properties:
accessCredentials:
description: Specifies a set of public keys to inject
into the vm guest
items:
description: AccessCredential represents a credential
source that can be used to authorize remote access
to the vm guest Only one of its members may be specified.
properties:
sshPublicKey:
description: SSHPublicKey represents the source
and method of applying a ssh public key into
a guest virtual machine.
properties:
propagationMethod:
description: PropagationMethod represents
how the public key is injected into the
vm guest.
properties:
configDrive:
description: ConfigDrivePropagation means
that the ssh public keys are injected
into the VM using metadata using the
configDrive cloud-init provider
type: object
noCloud:
description: NoCloudPropagation means
that the ssh public keys are injected
into the VM using metadata using the
noCloud cloud-init provider
type: object
qemuGuestAgent:
description: QemuGuestAgentAccessCredentailPropagation
means ssh public keys are dynamically
injected into the vm at runtime via
the qemu guest agent. This feature requires
the qemu guest agent to be running within
the guest.
properties:
users:
description: Users represents a list
of guest users that should have
the ssh public keys added to their
authorized_keys file.
items:
type: string
type: array
x-kubernetes-list-type: set
required:
- users
type: object
type: object
source:
description: Source represents where the public
keys are pulled from
properties:
secret:
description: Secret means that the access
credential is pulled from a kubernetes
secret
properties:
secretName:
description: SecretName represents
the name of the secret in the VMI's
namespace
type: string
required:
- secretName
type: object
type: object
required:
- propagationMethod
- source
type: object
userPassword:
description: UserPassword represents the source
and method for applying a guest user's password
properties:
propagationMethod:
description: propagationMethod represents
how the user passwords are injected into
the vm guest.
properties:
qemuGuestAgent:
description: QemuGuestAgentAccessCredentailPropagation
means passwords are dynamically injected
into the vm at runtime via the qemu
guest agent. This feature requires the
qemu guest agent to be running within
the guest.
type: object
type: object
source:
description: Source represents where the user
passwords are pulled from
properties:
secret:
description: Secret means that the access
credential is pulled from a kubernetes
secret
properties:
secretName:
description: SecretName represents
the name of the secret in the VMI's
namespace
type: string
required:
- secretName
type: object
type: object
required:
- propagationMethod
- source
type: object
type: object
type: array
x-kubernetes-list-type: atomic
affinity:
description: If affinity is specifies, obey all the
affinity rules
properties:
nodeAffinity:
description: Describes node affinity scheduling
rules for the pod.
properties:
preferredDuringSchedulingIgnoredDuringExecution:
description: The scheduler will prefer to schedule
pods to nodes that satisfy the affinity expressions
specified by this field, but it may choose
a node that violates one or more of the expressions.
The node that is most preferred is the one
with the greatest sum of weights, i.e. for
each node that meets all of the scheduling
requirements (resource request, requiredDuringScheduling
affinity expressions, etc.), compute a sum
by iterating through the elements of this
field and adding "weight" to the sum if the
node matches the corresponding matchExpressions;
the node(s) with the highest sum are the most
preferred.
items:
description: An empty preferred scheduling
term matches all objects with implicit weight
0 (i.e. it's a no-op). A null preferred
scheduling term matches no objects (i.e.
is also a no-op).
properties:
preference:
description: A node selector term, associated
with the corresponding weight.
properties:
matchExpressions:
description: A list of node selector
requirements by node's labels.
items:
description: A node selector requirement
is a selector that contains values,
a key, and an operator that relates
the key and values.
properties:
key:
description: The label key that
the selector applies to.
type: string
operator:
description: Represents a key's
relationship to a set of values.
Valid operators are In, NotIn,
Exists, DoesNotExist. Gt,
and Lt.
type: string
values:
description: An array of string
values. If the operator is
In or NotIn, the values array
must be non-empty. If the
operator is Exists or DoesNotExist,
the values array must be empty.
If the operator is Gt or Lt,
the values array must have
a single element, which will
be interpreted as an integer.
This array is replaced during
a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchFields:
description: A list of node selector
requirements by node's fields.
items:
description: A node selector requirement
is a selector that contains values,
a key, and an operator that relates
the key and values.
properties:
key:
description: The label key that
the selector applies to.
type: string
operator:
description: Represents a key's
relationship to a set of values.
Valid operators are In, NotIn,
Exists, DoesNotExist. Gt,
and Lt.
type: string
values:
description: An array of string
values. If the operator is
In or NotIn, the values array
must be non-empty. If the
operator is Exists or DoesNotExist,
the values array must be empty.
If the operator is Gt or Lt,
the values array must have
a single element, which will
be interpreted as an integer.
This array is replaced during
a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
type: object
weight:
description: Weight associated with matching
the corresponding nodeSelectorTerm,
in the range 1-100.
format: int32
type: integer
required:
- preference
- weight
type: object
type: array
requiredDuringSchedulingIgnoredDuringExecution:
description: If the affinity requirements specified
by this field are not met at scheduling time,
the pod will not be scheduled onto the node.
If the affinity requirements specified by
this field cease to be met at some point during
pod execution (e.g. due to an update), the
system may or may not try to eventually evict
the pod from its node.
properties:
nodeSelectorTerms:
description: Required. A list of node selector
terms. The terms are ORed.
items:
description: A null or empty node selector
term matches no objects. The requirements
of them are ANDed. The TopologySelectorTerm
type implements a subset of the NodeSelectorTerm.
properties:
matchExpressions:
description: A list of node selector
requirements by node's labels.
items:
description: A node selector requirement
is a selector that contains values,
a key, and an operator that relates
the key and values.
properties:
key:
description: The label key that
the selector applies to.
type: string
operator:
description: Represents a key's
relationship to a set of values.
Valid operators are In, NotIn,
Exists, DoesNotExist. Gt,
and Lt.
type: string
values:
description: An array of string
values. If the operator is
In or NotIn, the values array
must be non-empty. If the
operator is Exists or DoesNotExist,
the values array must be empty.
If the operator is Gt or Lt,
the values array must have
a single element, which will
be interpreted as an integer.
This array is replaced during
a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchFields:
description: A list of node selector
requirements by node's fields.
items:
description: A node selector requirement
is a selector that contains values,
a key, and an operator that relates
the key and values.
properties:
key:
description: The label key that
the selector applies to.
type: string
operator:
description: Represents a key's
relationship to a set of values.
Valid operators are In, NotIn,
Exists, DoesNotExist. Gt,
and Lt.
type: string
values:
description: An array of string
values. If the operator is
In or NotIn, the values array
must be non-empty. If the
operator is Exists or DoesNotExist,
the values array must be empty.
If the operator is Gt or Lt,
the values array must have
a single element, which will
be interpreted as an integer.
This array is replaced during
a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
type: object
type: array
required:
- nodeSelectorTerms
type: object
type: object
podAffinity:
description: Describes pod affinity scheduling rules
(e.g. co-locate this pod in the same node, zone,
etc. as some other pod(s)).
properties:
preferredDuringSchedulingIgnoredDuringExecution:
description: The scheduler will prefer to schedule
pods to nodes that satisfy the affinity expressions
specified by this field, but it may choose
a node that violates one or more of the expressions.
The node that is most preferred is the one
with the greatest sum of weights, i.e. for
each node that meets all of the scheduling
requirements (resource request, requiredDuringScheduling
affinity expressions, etc.), compute a sum
by iterating through the elements of this
field and adding "weight" to the sum if the
node has pods which matches the corresponding
podAffinityTerm; the node(s) with the highest
sum are the most preferred.
items:
description: The weights of all of the matched
WeightedPodAffinityTerm fields are added
per-node to find the most preferred node(s)
properties:
podAffinityTerm:
description: Required. A pod affinity
term, associated with the corresponding
weight.
properties:
labelSelector:
description: A label query over a
set of resources, in this case pods.
properties:
matchExpressions:
description: matchExpressions
is a list of label selector
requirements. The requirements
are ANDed.
items:
description: A label selector
requirement is a selector
that contains values, a key,
and an operator that relates
the key and values.
properties:
key:
description: key is the
label key that the selector
applies to.
type: string
operator:
description: operator represents
a key's relationship to
a set of values. Valid
operators are In, NotIn,
Exists and DoesNotExist.
type: string
values:
description: values is an
array of string values.
If the operator is In
or NotIn, the values array
must be non-empty. If
the operator is Exists
or DoesNotExist, the values
array must be empty. This
array is replaced during
a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a
map of {key,value} pairs. A
single {key,value} in the matchLabels
map is equivalent to an element
of matchExpressions, whose key
field is "key", the operator
is "In", and the values array
contains only "value". The requirements
are ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the
set of namespaces that the term
applies to. The term is applied
to the union of the namespaces selected
by this field and the ones listed
in the namespaces field. null selector
and null or empty namespaces list
means "this pod's namespace". An
empty selector ({}) matches all
namespaces.
properties:
matchExpressions:
description: matchExpressions
is a list of label selector
requirements. The requirements
are ANDed.
items:
description: A label selector
requirement is a selector
that contains values, a key,
and an operator that relates
the key and values.
properties:
key:
description: key is the
label key that the selector
applies to.
type: string
operator:
description: operator represents
a key's relationship to
a set of values. Valid
operators are In, NotIn,
Exists and DoesNotExist.
type: string
values:
description: values is an
array of string values.
If the operator is In
or NotIn, the values array
must be non-empty. If
the operator is Exists
or DoesNotExist, the values
array must be empty. This
array is replaced during
a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a
map of {key,value} pairs. A
single {key,value} in the matchLabels
map is equivalent to an element
of matchExpressions, whose key
field is "key", the operator
is "In", and the values array
contains only "value". The requirements
are ANDed.
type: object
type: object
namespaces:
description: namespaces specifies
a static list of namespace names
that the term applies to. The term
is applied to the union of the namespaces
listed in this field and the ones
selected by namespaceSelector. null
or empty namespaces list and null
namespaceSelector means "this pod's
namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located
(affinity) or not co-located (anti-affinity)
with the pods matching the labelSelector
in the specified namespaces, where
co-located is defined as running
on a node whose value of the label
with key topologyKey matches that
of any node on which any of the
selected pods is running. Empty
topologyKey is not allowed.
type: string
required:
- topologyKey
type: object
weight:
description: weight associated with matching
the corresponding podAffinityTerm, in
the range 1-100.
format: int32
type: integer
required:
- podAffinityTerm
- weight
type: object
type: array
requiredDuringSchedulingIgnoredDuringExecution:
description: If the affinity requirements specified
by this field are not met at scheduling time,
the pod will not be scheduled onto the node.
If the affinity requirements specified by
this field cease to be met at some point during
pod execution (e.g. due to a pod label update),
the system may or may not try to eventually
evict the pod from its node. When there are
multiple elements, the lists of nodes corresponding
to each podAffinityTerm are intersected, i.e.
all terms must be satisfied.
items:
description: Defines a set of pods (namely
those matching the labelSelector relative
to the given namespace(s)) that this pod
should be co-located (affinity) or not co-located
(anti-affinity) with, where co-located is
defined as running on a node whose value
of the label with key <topologyKey> matches
that of any node on which a pod of the set
of pods is running
properties:
labelSelector:
description: A label query over a set
of resources, in this case pods.
properties:
matchExpressions:
description: matchExpressions is a
list of label selector requirements.
The requirements are ANDed.
items:
description: A label selector requirement
is a selector that contains values,
a key, and an operator that relates
the key and values.
properties:
key:
description: key is the label
key that the selector applies
to.
type: string
operator:
description: operator represents
a key's relationship to a
set of values. Valid operators
are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array
of string values. If the operator
is In or NotIn, the values
array must be non-empty. If
the operator is Exists or
DoesNotExist, the values array
must be empty. This array
is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map
of {key,value} pairs. A single {key,value}
in the matchLabels map is equivalent
to an element of matchExpressions,
whose key field is "key", the operator
is "In", and the values array contains
only "value". The requirements are
ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set
of namespaces that the term applies
to. The term is applied to the union
of the namespaces selected by this field
and the ones listed in the namespaces
field. null selector and null or empty
namespaces list means "this pod's namespace".
An empty selector ({}) matches all namespaces.
properties:
matchExpressions:
description: matchExpressions is a
list of label selector requirements.
The requirements are ANDed.
items:
description: A label selector requirement
is a selector that contains values,
a key, and an operator that relates
the key and values.
properties:
key:
description: key is the label
key that the selector applies
to.
type: string
operator:
description: operator represents
a key's relationship to a
set of values. Valid operators
are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array
of string values. If the operator
is In or NotIn, the values
array must be non-empty. If
the operator is Exists or
DoesNotExist, the values array
must be empty. This array
is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map
of {key,value} pairs. A single {key,value}
in the matchLabels map is equivalent
to an element of matchExpressions,
whose key field is "key", the operator
is "In", and the values array contains
only "value". The requirements are
ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static
list of namespace names that the term
applies to. The term is applied to the
union of the namespaces listed in this
field and the ones selected by namespaceSelector.
null or empty namespaces list and null
namespaceSelector means "this pod's
namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located
(affinity) or not co-located (anti-affinity)
with the pods matching the labelSelector
in the specified namespaces, where co-located
is defined as running on a node whose
value of the label with key topologyKey
matches that of any node on which any
of the selected pods is running. Empty
topologyKey is not allowed.
type: string
required:
- topologyKey
type: object
type: array
type: object
podAntiAffinity:
description: Describes pod anti-affinity scheduling
rules (e.g. avoid putting this pod in the same
node, zone, etc. as some other pod(s)).
properties:
preferredDuringSchedulingIgnoredDuringExecution:
description: The scheduler will prefer to schedule
pods to nodes that satisfy the anti-affinity
expressions specified by this field, but it
may choose a node that violates one or more
of the expressions. The node that is most
preferred is the one with the greatest sum
of weights, i.e. for each node that meets
all of the scheduling requirements (resource
request, requiredDuringScheduling anti-affinity
expressions, etc.), compute a sum by iterating
through the elements of this field and adding
"weight" to the sum if the node has pods which
matches the corresponding podAffinityTerm;
the node(s) with the highest sum are the most
preferred.
items:
description: The weights of all of the matched
WeightedPodAffinityTerm fields are added
per-node to find the most preferred node(s)
properties:
podAffinityTerm:
description: Required. A pod affinity
term, associated with the corresponding
weight.
properties:
labelSelector:
description: A label query over a
set of resources, in this case pods.
properties:
matchExpressions:
description: matchExpressions
is a list of label selector
requirements. The requirements
are ANDed.
items:
description: A label selector
requirement is a selector
that contains values, a key,
and an operator that relates
the key and values.
properties:
key:
description: key is the
label key that the selector
applies to.
type: string
operator:
description: operator represents
a key's relationship to
a set of values. Valid
operators are In, NotIn,
Exists and DoesNotExist.
type: string
values:
description: values is an
array of string values.
If the operator is In
or NotIn, the values array
must be non-empty. If
the operator is Exists
or DoesNotExist, the values
array must be empty. This
array is replaced during
a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a
map of {key,value} pairs. A
single {key,value} in the matchLabels
map is equivalent to an element
of matchExpressions, whose key
field is "key", the operator
is "In", and the values array
contains only "value". The requirements
are ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the
set of namespaces that the term
applies to. The term is applied
to the union of the namespaces selected
by this field and the ones listed
in the namespaces field. null selector
and null or empty namespaces list
means "this pod's namespace". An
empty selector ({}) matches all
namespaces.
properties:
matchExpressions:
description: matchExpressions
is a list of label selector
requirements. The requirements
are ANDed.
items:
description: A label selector
requirement is a selector
that contains values, a key,
and an operator that relates
the key and values.
properties:
key:
description: key is the
label key that the selector
applies to.
type: string
operator:
description: operator represents
a key's relationship to
a set of values. Valid
operators are In, NotIn,
Exists and DoesNotExist.
type: string
values:
description: values is an
array of string values.
If the operator is In
or NotIn, the values array
must be non-empty. If
the operator is Exists
or DoesNotExist, the values
array must be empty. This
array is replaced during
a strategic merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a
map of {key,value} pairs. A
single {key,value} in the matchLabels
map is equivalent to an element
of matchExpressions, whose key
field is "key", the operator
is "In", and the values array
contains only "value". The requirements
are ANDed.
type: object
type: object
namespaces:
description: namespaces specifies
a static list of namespace names
that the term applies to. The term
is applied to the union of the namespaces
listed in this field and the ones
selected by namespaceSelector. null
or empty namespaces list and null
namespaceSelector means "this pod's
namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located
(affinity) or not co-located (anti-affinity)
with the pods matching the labelSelector
in the specified namespaces, where
co-located is defined as running
on a node whose value of the label
with key topologyKey matches that
of any node on which any of the
selected pods is running. Empty
topologyKey is not allowed.
type: string
required:
- topologyKey
type: object
weight:
description: weight associated with matching
the corresponding podAffinityTerm, in
the range 1-100.
format: int32
type: integer
required:
- podAffinityTerm
- weight
type: object
type: array
requiredDuringSchedulingIgnoredDuringExecution:
description: If the anti-affinity requirements
specified by this field are not met at scheduling
time, the pod will not be scheduled onto the
node. If the anti-affinity requirements specified
by this field cease to be met at some point
during pod execution (e.g. due to a pod label
update), the system may or may not try to
eventually evict the pod from its node. When
there are multiple elements, the lists of
nodes corresponding to each podAffinityTerm
are intersected, i.e. all terms must be satisfied.
items:
description: Defines a set of pods (namely
those matching the labelSelector relative
to the given namespace(s)) that this pod
should be co-located (affinity) or not co-located
(anti-affinity) with, where co-located is
defined as running on a node whose value
of the label with key <topologyKey> matches
that of any node on which a pod of the set
of pods is running
properties:
labelSelector:
description: A label query over a set
of resources, in this case pods.
properties:
matchExpressions:
description: matchExpressions is a
list of label selector requirements.
The requirements are ANDed.
items:
description: A label selector requirement
is a selector that contains values,
a key, and an operator that relates
the key and values.
properties:
key:
description: key is the label
key that the selector applies
to.
type: string
operator:
description: operator represents
a key's relationship to a
set of values. Valid operators
are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array
of string values. If the operator
is In or NotIn, the values
array must be non-empty. If
the operator is Exists or
DoesNotExist, the values array
must be empty. This array
is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map
of {key,value} pairs. A single {key,value}
in the matchLabels map is equivalent
to an element of matchExpressions,
whose key field is "key", the operator
is "In", and the values array contains
only "value". The requirements are
ANDed.
type: object
type: object
namespaceSelector:
description: A label query over the set
of namespaces that the term applies
to. The term is applied to the union
of the namespaces selected by this field
and the ones listed in the namespaces
field. null selector and null or empty
namespaces list means "this pod's namespace".
An empty selector ({}) matches all namespaces.
properties:
matchExpressions:
description: matchExpressions is a
list of label selector requirements.
The requirements are ANDed.
items:
description: A label selector requirement
is a selector that contains values,
a key, and an operator that relates
the key and values.
properties:
key:
description: key is the label
key that the selector applies
to.
type: string
operator:
description: operator represents
a key's relationship to a
set of values. Valid operators
are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array
of string values. If the operator
is In or NotIn, the values
array must be non-empty. If
the operator is Exists or
DoesNotExist, the values array
must be empty. This array
is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map
of {key,value} pairs. A single {key,value}
in the matchLabels map is equivalent
to an element of matchExpressions,
whose key field is "key", the operator
is "In", and the values array contains
only "value". The requirements are
ANDed.
type: object
type: object
namespaces:
description: namespaces specifies a static
list of namespace names that the term
applies to. The term is applied to the
union of the namespaces listed in this
field and the ones selected by namespaceSelector.
null or empty namespaces list and null
namespaceSelector means "this pod's
namespace".
items:
type: string
type: array
topologyKey:
description: This pod should be co-located
(affinity) or not co-located (anti-affinity)
with the pods matching the labelSelector
in the specified namespaces, where co-located
is defined as running on a node whose
value of the label with key topologyKey
matches that of any node on which any
of the selected pods is running. Empty
topologyKey is not allowed.
type: string
required:
- topologyKey
type: object
type: array
type: object
type: object
architecture:
description: Specifies the architecture of the vm guest
you are attempting to run. Defaults to the compiled
architecture of the KubeVirt components
type: string
dnsConfig:
description: Specifies the DNS parameters of a pod.
Parameters specified here will be merged to the generated
DNS configuration based on DNSPolicy.
properties:
nameservers:
description: A list of DNS name server IP addresses.
This will be appended to the base nameservers
generated from DNSPolicy. Duplicated nameservers
will be removed.
items:
type: string
type: array
options:
description: A list of DNS resolver options. This
will be merged with the base options generated
from DNSPolicy. Duplicated entries will be removed.
Resolution options given in Options will override
those that appear in the base DNSPolicy.
items:
description: PodDNSConfigOption defines DNS resolver
options of a pod.
properties:
name:
description: Required.
type: string
value:
type: string
type: object
type: array
searches:
description: A list of DNS search domains for host-name
lookup. This will be appended to the base search
paths generated from DNSPolicy. Duplicated search
paths will be removed.
items:
type: string
type: array
type: object
dnsPolicy:
description: Set DNS policy for the pod. Defaults to
"ClusterFirst". Valid values are 'ClusterFirstWithHostNet',
'ClusterFirst', 'Default' or 'None'. DNS parameters
given in DNSConfig will be merged with the policy
selected with DNSPolicy. To have DNS options set along
with hostNetwork, you have to specify DNS policy explicitly
to 'ClusterFirstWithHostNet'.
type: string
domain:
description: Specification of the desired behavior of
the VirtualMachineInstance on the host.
properties:
chassis:
description: Chassis specifies the chassis info
passed to the domain.
properties:
asset:
type: string
manufacturer:
type: string
serial:
type: string
sku:
type: string
version:
type: string
type: object
clock:
description: Clock sets the clock and timers of
the vmi.
properties:
timer:
description: Timer specifies whih timers are
attached to the vmi.
properties:
hpet:
description: HPET (High Precision Event
Timer) - multiple timers with periodic
interrupts.
properties:
present:
description: Enabled set to false makes
sure that the machine type or a preset
can't add the timer. Defaults to true.
type: boolean
tickPolicy:
description: TickPolicy determines what
happens when QEMU misses a deadline
for injecting a tick to the guest.
One of "delay", "catchup", "merge",
"discard".
type: string
type: object
hyperv:
description: Hyperv (Hypervclock) - lets
guests read the host’s wall clock time
(paravirtualized). For windows guests.
properties:
present:
description: Enabled set to false makes
sure that the machine type or a preset
can't add the timer. Defaults to true.
type: boolean
type: object
kvm:
description: "KVM \t(KVM clock) - lets guests
read the host’s wall clock time (paravirtualized).
For linux guests."
properties:
present:
description: Enabled set to false makes
sure that the machine type or a preset
can't add the timer. Defaults to true.
type: boolean
type: object
pit:
description: PIT (Programmable Interval
Timer) - a timer with periodic interrupts.
properties:
present:
description: Enabled set to false makes
sure that the machine type or a preset
can't add the timer. Defaults to true.
type: boolean
tickPolicy:
description: TickPolicy determines what
happens when QEMU misses a deadline
for injecting a tick to the guest.
One of "delay", "catchup", "discard".
type: string
type: object
rtc:
description: RTC (Real Time Clock) - a continuously
running timer with periodic interrupts.
properties:
present:
description: Enabled set to false makes
sure that the machine type or a preset
can't add the timer. Defaults to true.
type: boolean
tickPolicy:
description: TickPolicy determines what
happens when QEMU misses a deadline
for injecting a tick to the guest.
One of "delay", "catchup".
type: string
track:
description: Track the guest or the
wall clock.
type: string
type: object
type: object
timezone:
description: Timezone sets the guest clock to
the specified timezone. Zone name follows
the TZ environment variable format (e.g. 'America/New_York').
type: string
utc:
description: UTC sets the guest clock to UTC
on each boot. If an offset is specified, guest
changes to the clock will be kept during reboots
and are not reset.
properties:
offsetSeconds:
description: OffsetSeconds specifies an
offset in seconds, relative to UTC. If
set, guest changes to the clock will be
kept during reboots and not reset.
type: integer
type: object
type: object
cpu:
description: CPU allow specified the detailed CPU
topology inside the vmi.
properties:
cores:
description: Cores specifies the number of cores
inside the vmi. Must be a value greater or
equal 1.
format: int32
type: integer
dedicatedCpuPlacement:
description: DedicatedCPUPlacement requests
the scheduler to place the VirtualMachineInstance
on a node with enough dedicated pCPUs and
pin the vCPUs to it.
type: boolean
features:
description: Features specifies the CPU features
list inside the VMI.
items:
description: CPUFeature allows specifying
a CPU feature.
properties:
name:
description: Name of the CPU feature
type: string
policy:
description: 'Policy is the CPU feature
attribute which can have the following
attributes: force - The virtual CPU
will claim the feature is supported
regardless of it being supported by
host CPU. require - Guest creation
will fail unless the feature is supported
by the host CPU or the hypervisor is
able to emulate it. optional - The feature
will be supported by virtual CPU if
and only if it is supported by host
CPU. disable - The feature will not
be supported by virtual CPU. forbid -
Guest creation will fail if the feature
is supported by host CPU. Defaults to
require'
type: string
required:
- name
type: object
type: array
isolateEmulatorThread:
description: IsolateEmulatorThread requests
one more dedicated pCPU to be allocated for
the VMI to place the emulator thread on it.
type: boolean
maxSockets:
description: MaxSockets specifies the maximum
amount of sockets that can be hotplugged
format: int32
type: integer
model:
description: Model specifies the CPU model inside
the VMI. List of available models https://github.com/libvirt/libvirt/tree/master/src/cpu_map.
It is possible to specify special cases like
"host-passthrough" to get the same CPU as
the node and "host-model" to get CPU closest
to the node one. Defaults to host-model.
type: string
numa:
description: NUMA allows specifying settings
for the guest NUMA topology
properties:
guestMappingPassthrough:
description: GuestMappingPassthrough will
create an efficient guest topology based
on host CPUs exclusively assigned to a
pod. The created topology ensures that
memory and CPUs on the virtual numa nodes
never cross boundaries of host numa nodes.
type: object
type: object
realtime:
description: Realtime instructs the virt-launcher
to tune the VMI for lower latency, optional
for real time workloads
properties:
mask:
description: 'Mask defines the vcpu mask
expression that defines which vcpus are
used for realtime. Format matches libvirt''s
expressions. Example: "0-3,^1","0,2,3","2-3"'
type: string
type: object
sockets:
description: Sockets specifies the number of
sockets inside the vmi. Must be a value greater
or equal 1.
format: int32
type: integer
threads:
description: Threads specifies the number of
threads inside the vmi. Must be a value greater
or equal 1.
format: int32
type: integer
type: object
devices:
description: Devices allows adding disks, network
interfaces, and others
properties:
autoattachGraphicsDevice:
description: Whether to attach the default graphics
device or not. VNC will not be available if
set to false. Defaults to true.
type: boolean
autoattachInputDevice:
description: Whether to attach an Input Device.
Defaults to false.
type: boolean
autoattachMemBalloon:
description: Whether to attach the Memory balloon
device with default period. Period can be
adjusted in virt-config. Defaults to true.
type: boolean
autoattachPodInterface:
description: Whether to attach a pod network
interface. Defaults to true.
type: boolean
autoattachSerialConsole:
description: Whether to attach the default virtio-serial
console or not. Serial console access will
not be available if set to false. Defaults
to true.
type: boolean
autoattachVSOCK:
description: Whether to attach the VSOCK CID
to the VM or not. VSOCK access will be available
if set to true. Defaults to false.
type: boolean
blockMultiQueue:
description: Whether or not to enable virtio
multi-queue for block devices. Defaults to
false.
type: boolean
clientPassthrough:
description: To configure and access client
devices such as redirecting USB
type: object
disableHotplug:
description: DisableHotplug disabled the ability
to hotplug disks.
type: boolean
disks:
description: Disks describes disks, cdroms and
luns which are connected to the vmi.
items:
properties:
blockSize:
description: If specified, the virtual
disk will be presented with the given
block sizes.
properties:
custom:
description: CustomBlockSize represents
the desired logical and physical
block size for a VM disk.
properties:
logical:
type: integer
physical:
type: integer
required:
- logical
- physical
type: object
matchVolume:
description: Represents if a feature
is enabled or disabled.
properties:
enabled:
description: Enabled determines
if the feature should be enabled
or disabled on the guest. Defaults
to true.
type: boolean
type: object
type: object
bootOrder:
description: BootOrder is an integer value
> 0, used to determine ordering of boot
devices. Lower values take precedence.
Each disk or interface that has a boot
order must have a unique value. Disks
without a boot order are not tried if
a disk with a boot order exists.
type: integer
cache:
description: 'Cache specifies which kvm
disk cache mode should be used. Supported
values are: CacheNone, CacheWriteThrough.'
type: string
cdrom:
description: Attach a volume as a cdrom
to the vmi.
properties:
bus:
description: 'Bus indicates the type
of disk device to emulate. supported
values: virtio, sata, scsi.'
type: string
readonly:
description: ReadOnly. Defaults to
true.
type: boolean
tray:
description: Tray indicates if the
tray of the device is open or closed.
Allowed values are "open" and "closed".
Defaults to closed.
type: string
type: object
dedicatedIOThread:
description: dedicatedIOThread indicates
this disk should have an exclusive IO
Thread. Enabling this implies useIOThreads
= true. Defaults to false.
type: boolean
disk:
description: Attach a volume as a disk
to the vmi.
properties:
bus:
description: 'Bus indicates the type
of disk device to emulate. supported
values: virtio, sata, scsi, usb.'
type: string
pciAddress:
description: 'If specified, the virtual
disk will be placed on the guests
pci address with the specified PCI
address. For example: 0000:81:01.10'
type: string
readonly:
description: ReadOnly. Defaults to
false.
type: boolean
type: object
errorPolicy:
description: If specified, it can change
the default error policy (stop) for
the disk
type: string
io:
description: 'IO specifies which QEMU
disk IO mode should be used. Supported
values are: native, default, threads.'
type: string
lun:
description: Attach a volume as a LUN
to the vmi.
properties:
bus:
description: 'Bus indicates the type
of disk device to emulate. supported
values: virtio, sata, scsi.'
type: string
readonly:
description: ReadOnly. Defaults to
false.
type: boolean
reservation:
description: Reservation indicates
if the disk needs to support the
persistent reservation for the SCSI
disk
type: boolean
type: object
name:
description: Name is the device name
type: string
serial:
description: Serial provides the ability
to specify a serial number for the disk
device.
type: string
shareable:
description: If specified the disk is
made sharable and multiple write from
different VMs are permitted
type: boolean
tag:
description: If specified, disk address
and its tag will be provided to the
guest via config drive metadata
type: string
required:
- name
type: object
type: array
downwardMetrics:
description: DownwardMetrics creates a virtio
serials for exposing the downward metrics
to the vmi.
type: object
filesystems:
description: Filesystems describes filesystem
which is connected to the vmi.
items:
properties:
name:
description: Name is the device name
type: string
virtiofs:
description: Virtiofs is supported
type: object
required:
- name
- virtiofs
type: object
type: array
x-kubernetes-list-type: atomic
gpus:
description: Whether to attach a GPU device
to the vmi.
items:
properties:
deviceName:
type: string
name:
description: Name of the GPU device as
exposed by a device plugin
type: string
tag:
description: If specified, the virtual
network interface address and its tag
will be provided to the guest via config
drive
type: string
virtualGPUOptions:
properties:
display:
properties:
enabled:
description: Enabled determines
if a display addapter backed
by a vGPU should be enabled
or disabled on the guest. Defaults
to true.
type: boolean
ramFB:
description: Enables a boot framebuffer,
until the guest OS loads a real
GPU driver Defaults to true.
properties:
enabled:
description: Enabled determines
if the feature should be
enabled or disabled on the
guest. Defaults to true.
type: boolean
type: object
type: object
type: object
required:
- deviceName
- name
type: object
type: array
x-kubernetes-list-type: atomic
hostDevices:
description: Whether to attach a host device
to the vmi.
items:
properties:
deviceName:
description: DeviceName is the resource
name of the host device exposed by a
device plugin
type: string
name:
type: string
tag:
description: If specified, the virtual
network interface address and its tag
will be provided to the guest via config
drive
type: string
required:
- deviceName
- name
type: object
type: array
x-kubernetes-list-type: atomic
inputs:
description: Inputs describe input devices
items:
properties:
bus:
description: 'Bus indicates the bus of
input device to emulate. Supported values:
virtio, usb.'
type: string
name:
description: Name is the device name
type: string
type:
description: 'Type indicated the type
of input device. Supported values: tablet.'
type: string
required:
- name
- type
type: object
type: array
interfaces:
description: Interfaces describe network interfaces
which are added to the vmi.
items:
properties:
acpiIndex:
description: If specified, the ACPI index
is used to provide network interface
device naming, that is stable across
changes in PCI addresses assigned to
the device. This value is required to
be unique across all devices and be
between 1 and (16*1024-1).
type: integer
binding:
description: 'Binding specifies the binding
plugin that will be used to connect
the interface to the guest. It provides
an alternative to InterfaceBindingMethod.
version: 1alphav1'
properties:
name:
description: 'Name references to the
binding name as denined in the kubevirt
CR. version: 1alphav1'
type: string
required:
- name
type: object
bootOrder:
description: BootOrder is an integer value
> 0, used to determine ordering of boot
devices. Lower values take precedence.
Each interface or disk that has a boot
order must have a unique value. Interfaces
without a boot order are not tried.
type: integer
bridge:
description: InterfaceBridge connects
to a given network via a linux bridge.
type: object
dhcpOptions:
description: If specified the network
interface will pass additional DHCP
options to the VMI
properties:
bootFileName:
description: If specified will pass
option 67 to interface's DHCP server
type: string
ntpServers:
description: If specified will pass
the configured NTP server to the
VM via DHCP option 042.
items:
type: string
type: array
privateOptions:
description: 'If specified will pass
extra DHCP options for private use,
range: 224-254'
items:
description: DHCPExtraOptions defines
Extra DHCP options for a VM.
properties:
option:
description: Option is an Integer
value from 224-254 Required.
type: integer
value:
description: Value is a String
value for the Option provided
Required.
type: string
required:
- option
- value
type: object
type: array
tftpServerName:
description: If specified will pass
option 66 to interface's DHCP server
type: string
type: object
macAddress:
description: 'Interface MAC address. For
example: de:ad:00:00:be:af or DE-AD-00-00-BE-AF.'
type: string
macvtap:
description: Deprecated, please refer
to Kubevirt user guide for alternatives.
type: object
masquerade:
description: InterfaceMasquerade connects
to a given network using netfilter rules
to nat the traffic.
type: object
model:
description: 'Interface model. One of:
e1000, e1000e, ne2k_pci, pcnet, rtl8139,
virtio. Defaults to virtio. TODO:(ihar)
switch to enums once opengen-api supports
them. See: https://github.com/kubernetes/kube-openapi/issues/51'
type: string
name:
description: Logical name of the interface
as well as a reference to the associated
networks. Must match the Name of a Network.
type: string
passt:
description: Deprecated, please refer
to Kubevirt user guide for alternatives.
type: object
pciAddress:
description: 'If specified, the virtual
network interface will be placed on
the guests pci address with the specified
PCI address. For example: 0000:81:01.10'
type: string
ports:
description: List of ports to be forwarded
to the virtual machine.
items:
description: Port represents a port
to expose from the virtual machine.
Default protocol TCP. The port field
is mandatory
properties:
name:
description: If specified, this
must be an IANA_SVC_NAME and unique
within the pod. Each named port
in a pod must have a unique name.
Name for the port that can be
referred to by services.
type: string
port:
description: Number of port to expose
for the virtual machine. This
must be a valid port number, 0
< x < 65536.
format: int32
type: integer
protocol:
description: Protocol for port.
Must be UDP or TCP. Defaults to
"TCP".
type: string
required:
- port
type: object
type: array
slirp:
description: InterfaceSlirp connects to
a given network using QEMU user networking
mode.
type: object
sriov:
description: InterfaceSRIOV connects to
a given network by passing-through an
SR-IOV PCI device via vfio.
type: object
state:
description: State represents the requested
operational state of the interface.
The (only) value supported is 'absent',
expressing a request to remove the interface.
type: string
tag:
description: If specified, the virtual
network interface address and its tag
will be provided to the guest via config
drive
type: string
required:
- name
type: object
type: array
logSerialConsole:
description: Whether to log the auto-attached
default serial console or not. Serial console
logs will be collect to a file and then streamed
from a named 'guest-console-log'. Not relevant
if autoattachSerialConsole is disabled. Defaults
to cluster wide setting on VirtualMachineOptions.
type: boolean
networkInterfaceMultiqueue:
description: If specified, virtual network interfaces
configured with a virtio bus will also enable
the vhost multiqueue feature for network devices.
The number of queues created depends on additional
factors of the VirtualMachineInstance, like
the number of guest CPUs.
type: boolean
rng:
description: Whether to have random number generator
from host
type: object
sound:
description: Whether to emulate a sound device.
properties:
model:
description: 'We only support ich9 or ac97.
If SoundDevice is not set: No sound card
is emulated. If SoundDevice is set but
Model is not: ich9'
type: string
name:
description: User's defined name for this
sound device
type: string
required:
- name
type: object
tpm:
description: Whether to emulate a TPM device.
properties:
persistent:
description: Persistent indicates the state
of the TPM device should be kept accross
reboots Defaults to false
type: boolean
type: object
useVirtioTransitional:
description: Fall back to legacy virtio 0.9
support if virtio bus is selected on devices.
This is helpful for old machines like CentOS6
or RHEL6 which do not understand virtio_non_transitional
(virtio 1.0).
type: boolean
watchdog:
description: Watchdog describes a watchdog device
which can be added to the vmi.
properties:
i6300esb:
description: i6300esb watchdog device.
properties:
action:
description: The action to take. Valid
values are poweroff, reset, shutdown.
Defaults to reset.
type: string
type: object
name:
description: Name of the watchdog.
type: string
required:
- name
type: object
type: object
features:
description: Features like acpi, apic, hyperv, smm.
properties:
acpi:
description: ACPI enables/disables ACPI inside
the guest. Defaults to enabled.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
type: object
apic:
description: Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
endOfInterrupt:
description: EndOfInterrupt enables the
end of interrupt notification in the guest.
Defaults to false.
type: boolean
type: object
hyperv:
description: Defaults to the machine type setting.
properties:
evmcs:
description: EVMCS Speeds up L2 vmexits,
but disables other virtualization features.
Requires vapic. Defaults to the machine
type setting.
properties:
enabled:
description: Enabled determines if the
feature should be enabled or disabled
on the guest. Defaults to true.
type: boolean
type: object
frequencies:
description: Frequencies improves the TSC
clock source handling for Hyper-V on KVM.
Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the
feature should be enabled or disabled
on the guest. Defaults to true.
type: boolean
type: object
ipi:
description: IPI improves performances in
overcommited environments. Requires vpindex.
Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the
feature should be enabled or disabled
on the guest. Defaults to true.
type: boolean
type: object
reenlightenment:
description: Reenlightenment enables the
notifications on TSC frequency changes.
Defaults to the machine type setting.
properties:
enabled:
description: Enabled determines if the
feature should be enabled or disabled
on the guest. Defaults to true.
type: boolean
type: object
relaxed:
description: Relaxed instructs the guest
OS to disable watchdog timeouts. Defaults
to the machine type setting.
properties:
enabled:
description: Enabled determines if the
feature should be enabled or disabled
on the guest. Defaults to true.
type: boolean
type: object
reset:
description: Reset enables Hyperv reboot/reset
for the vmi. Requires synic. Defaults
to the machine type setting.
properties:
enabled:
description: Enabled determines if the
feature should be enabled or disabled
on the guest. Defaults to true.
type: boolean
type: object
runtime:
description: Runtime improves the time accounting
to improve scheduling in the guest. Defaults
to the machine type setting.
properties:
enabled:
description: Enabled determines if the
feature should be enabled or disabled
on the guest. Defaults to true.
type: boolean
type: object
spinlocks:
description: Spinlocks allows to configure
the spinlock retry attempts.
properties:
enabled:
description: Enabled determines if the
feature should be enabled or disabled
on the guest. Defaults to true.
type: boolean
spinlocks:
description: Retries indicates the number
of retries. Must be a value greater
or equal 4096. Defaults to 4096.
format: int32
type: integer
type: object
synic:
description: SyNIC enables the Synthetic
Interrupt Controller. Defaults to the
machine type setting.
properties:
enabled:
description: Enabled determines if the
feature should be enabled or disabled
on the guest. Defaults to true.
type: boolean
type: object
synictimer:
description: SyNICTimer enables Synthetic
Interrupt Controller Timers, reducing
CPU load. Defaults to the machine type
setting.
properties:
direct:
description: Represents if a feature
is enabled or disabled.
properties:
enabled:
description: Enabled determines
if the feature should be enabled
or disabled on the guest. Defaults
to true.
type: boolean
type: object
enabled:
type: boolean
type: object
tlbflush:
description: TLBFlush improves performances
in overcommited environments. Requires
vpindex. Defaults to the machine type
setting.
properties:
enabled:
description: Enabled determines if the
feature should be enabled or disabled
on the guest. Defaults to true.
type: boolean
type: object
vapic:
description: VAPIC improves the paravirtualized
handling of interrupts. Defaults to the
machine type setting.
properties:
enabled:
description: Enabled determines if the
feature should be enabled or disabled
on the guest. Defaults to true.
type: boolean
type: object
vendorid:
description: VendorID allows setting the
hypervisor vendor id. Defaults to the
machine type setting.
properties:
enabled:
description: Enabled determines if the
feature should be enabled or disabled
on the guest. Defaults to true.
type: boolean
vendorid:
description: VendorID sets the hypervisor
vendor id, visible to the vmi. String
up to twelve characters.
type: string
type: object
vpindex:
description: VPIndex enables the Virtual
Processor Index to help windows identifying
virtual processors. Defaults to the machine
type setting.
properties:
enabled:
description: Enabled determines if the
feature should be enabled or disabled
on the guest. Defaults to true.
type: boolean
type: object
type: object
kvm:
description: Configure how KVM presence is exposed
to the guest.
properties:
hidden:
description: Hide the KVM hypervisor from
standard MSR based discovery. Defaults
to false
type: boolean
type: object
pvspinlock:
description: Notify the guest that the host
supports paravirtual spinlocks. For older
kernels this feature should be explicitly
disabled.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
type: object
smm:
description: SMM enables/disables System Management
Mode. TSEG not yet implemented.
properties:
enabled:
description: Enabled determines if the feature
should be enabled or disabled on the guest.
Defaults to true.
type: boolean
type: object
type: object
firmware:
description: Firmware.
properties:
acpi:
description: Information that can be set in
the ACPI table
properties:
slicNameRef:
description: 'SlicNameRef should match the
volume name of a secret object. The data
in the secret should be a binary blob
that follows the ACPI SLIC standard, see:
https://learn.microsoft.com/en-us/previous-versions/windows/hardware/design/dn653305(v=vs.85)'
type: string
type: object
bootloader:
description: Settings to control the bootloader
that is used.
properties:
bios:
description: If set (default), BIOS will
be used.
properties:
useSerial:
description: If set, the BIOS output
will be transmitted over serial
type: boolean
type: object
efi:
description: If set, EFI will be used instead
of BIOS.
properties:
persistent:
description: If set to true, Persistent
will persist the EFI NVRAM across
reboots. Defaults to false
type: boolean
secureBoot:
description: If set, SecureBoot will
be enabled and the OVMF roms will
be swapped for SecureBoot-enabled
ones. Requires SMM to be enabled.
Defaults to true
type: boolean
type: object
type: object
kernelBoot:
description: Settings to set the kernel for
booting.
properties:
container:
description: Container defines the container
that containes kernel artifacts
properties:
image:
description: Image that contains initrd
/ kernel files.
type: string
imagePullPolicy:
description: 'Image pull policy. One
of Always, Never, IfNotPresent. Defaults
to Always if :latest tag is specified,
or IfNotPresent otherwise. Cannot
be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images'
type: string
imagePullSecret:
description: ImagePullSecret is the
name of the Docker registry secret
required to pull the image. The secret
must already exist.
type: string
initrdPath:
description: the fully-qualified path
to the ramdisk image in the host OS
type: string
kernelPath:
description: The fully-qualified path
to the kernel image in the host OS
type: string
required:
- image
type: object
kernelArgs:
description: Arguments to be passed to the
kernel at boot time
type: string
type: object
serial:
description: The system-serial-number in SMBIOS
type: string
uuid:
description: UUID reported by the vmi bios.
Defaults to a random generated uid.
type: string
type: object
ioThreadsPolicy:
description: 'Controls whether or not disks will
share IOThreads. Omitting IOThreadsPolicy disables
use of IOThreads. One of: shared, auto'
type: string
launchSecurity:
description: Launch Security setting of the vmi.
properties:
sev:
description: AMD Secure Encrypted Virtualization
(SEV).
properties:
attestation:
description: If specified, run the attestation
process for a vmi.
type: object
dhCert:
description: Base64 encoded guest owner's
Diffie-Hellman key.
type: string
policy:
description: 'Guest policy flags as defined
in AMD SEV API specification. Note: due
to security reasons it is not allowed
to enable guest debugging. Therefore NoDebug
flag is not exposed to users and is always
true.'
properties:
encryptedState:
description: SEV-ES is required. Defaults
to false.
type: boolean
type: object
session:
description: Base64 encoded session blob.
type: string
type: object
type: object
machine:
description: Machine type.
properties:
type:
description: QEMU machine type is the actual
chipset of the VirtualMachineInstance.
type: string
type: object
memory:
description: Memory allow specifying the VMI memory
features.
properties:
guest:
anyOf:
- type: integer
- type: string
description: Guest allows to specifying the
amount of memory which is visible inside the
Guest OS. The Guest must lie between Requests
and Limits from the resources section. Defaults
to the requested memory in the resources section
if not specified.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
hugepages:
description: Hugepages allow to use hugepages
for the VirtualMachineInstance instead of
regular memory.
properties:
pageSize:
description: PageSize specifies the hugepage
size, for x86_64 architecture valid values
are 1Gi and 2Mi.
type: string
type: object
maxGuest:
anyOf:
- type: integer
- type: string
description: MaxGuest allows to specify the
maximum amount of memory which is visible
inside the Guest OS. The delta between MaxGuest
and Guest is the amount of memory that can
be hot(un)plugged.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
type: object
resources:
description: Resources describes the Compute Resources
required by this vmi.
properties:
limits:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: Limits describes the maximum amount
of compute resources allowed. Valid resource
keys are "memory" and "cpu".
type: object
overcommitGuestOverhead:
description: Don't ask the scheduler to take
the guest-management overhead into account.
Instead put the overhead only into the container's
memory limit. This can lead to crashes if
all memory is in use on a node. Defaults to
false.
type: boolean
requests:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: Requests is a description of the
initial vmi resources. Valid resource keys
are "memory" and "cpu".
type: object
type: object
required:
- devices
type: object
evictionStrategy:
description: 'EvictionStrategy describes the strategy
to follow when a node drain occurs. The possible options
are: - "None": No action will be taken, according
to the specified ''RunStrategy'' the VirtualMachine
will be restarted or shutdown. - "LiveMigrate": the
VirtualMachineInstance will be migrated instead of
being shutdown. - "LiveMigrateIfPossible": the same
as "LiveMigrate" but only if the VirtualMachine is
Live-Migratable, otherwise it will behave as "None".
- "External": the VirtualMachineInstance will be protected
by a PDB and ''vmi.Status.EvacuationNodeName'' will
be set on eviction. This is mainly useful for cluster-api-provider-kubevirt
(capk) which needs a way for VMI''s to be blocked
from eviction, yet signal capk that eviction has been
called on the VMI so the capk controller can handle
tearing the VMI down. Details can be found in the
commit description https://github.com/kubevirt/kubevirt/commit/c1d77face705c8b126696bac9a3ee3825f27f1fa.'
type: string
hostname:
description: Specifies the hostname of the vmi If not
specified, the hostname will be set to the name of
the vmi, if dhcp or cloud-init is configured properly.
type: string
livenessProbe:
description: 'Periodic probe of VirtualMachineInstance
liveness. VirtualmachineInstances will be stopped
if the probe fails. Cannot be updated. More info:
https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
properties:
exec:
description: One and only one of the following should
be specified. Exec specifies the action to take,
it will be executed on the guest through the qemu-guest-agent.
If the guest agent is not available, this probe
will fail.
properties:
command:
description: Command is the command line to
execute inside the container, the working
directory for the command is root ('/') in
the container's filesystem. The command is
simply exec'd, it is not run inside a shell,
so traditional shell instructions ('|', etc)
won't work. To use a shell, you need to explicitly
call out to that shell. Exit status of 0 is
treated as live/healthy and non-zero is unhealthy.
items:
type: string
type: array
type: object
failureThreshold:
description: Minimum consecutive failures for the
probe to be considered failed after having succeeded.
Defaults to 3. Minimum value is 1.
format: int32
type: integer
guestAgentPing:
description: GuestAgentPing contacts the qemu-guest-agent
for availability checks.
type: object
httpGet:
description: HTTPGet specifies the http request
to perform.
properties:
host:
description: Host name to connect to, defaults
to the pod IP. You probably want to set "Host"
in httpHeaders instead.
type: string
httpHeaders:
description: Custom headers to set in the request.
HTTP allows repeated headers.
items:
description: HTTPHeader describes a custom
header to be used in HTTP probes
properties:
name:
description: The header field name
type: string
value:
description: The header field value
type: string
required:
- name
- value
type: object
type: array
path:
description: Path to access on the HTTP server.
type: string
port:
anyOf:
- type: integer
- type: string
description: Name or number of the port to access
on the container. Number must be in the range
1 to 65535. Name must be an IANA_SVC_NAME.
x-kubernetes-int-or-string: true
scheme:
description: Scheme to use for connecting to
the host. Defaults to HTTP.
type: string
required:
- port
type: object
initialDelaySeconds:
description: 'Number of seconds after the VirtualMachineInstance
has started before liveness probes are initiated.
More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
format: int32
type: integer
periodSeconds:
description: How often (in seconds) to perform the
probe. Default to 10 seconds. Minimum value is
1.
format: int32
type: integer
successThreshold:
description: Minimum consecutive successes for the
probe to be considered successful after having
failed. Defaults to 1. Must be 1 for liveness.
Minimum value is 1.
format: int32
type: integer
tcpSocket:
description: 'TCPSocket specifies an action involving
a TCP port. TCP hooks not yet supported TODO:
implement a realistic TCP lifecycle hook'
properties:
host:
description: 'Optional: Host name to connect
to, defaults to the pod IP.'
type: string
port:
anyOf:
- type: integer
- type: string
description: Number or name of the port to access
on the container. Number must be in the range
1 to 65535. Name must be an IANA_SVC_NAME.
x-kubernetes-int-or-string: true
required:
- port
type: object
timeoutSeconds:
description: 'Number of seconds after which the
probe times out. For exec probes the timeout fails
the probe but does not terminate the command running
on the guest. This means a blocking command can
result in an increasing load on the guest. A small
buffer will be added to the resulting workload
exec probe to compensate for delays caused by
the qemu guest exec mechanism. Defaults to 1 second.
Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
format: int32
type: integer
type: object
networks:
description: List of networks that can be attached to
a vm's virtual interface.
items:
description: Network represents a network type and
a resource that should be connected to the vm.
properties:
multus:
description: Represents the multus cni network.
properties:
default:
description: Select the default network and
add it to the multus-cni.io/default-network
annotation.
type: boolean
networkName:
description: 'References to a NetworkAttachmentDefinition
CRD object. Format: <networkName>, <namespace>/<networkName>.
If namespace is not specified, VMI namespace
is assumed.'
type: string
required:
- networkName
type: object
name:
description: 'Network name. Must be a DNS_LABEL
and unique within the vm. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names'
type: string
pod:
description: Represents the stock pod network
interface.
properties:
vmIPv6NetworkCIDR:
description: IPv6 CIDR for the vm network.
Defaults to fd10:0:2::/120 if not specified.
type: string
vmNetworkCIDR:
description: CIDR for vm network. Default
10.0.2.0/24 if not specified.
type: string
type: object
required:
- name
type: object
type: array
nodeSelector:
additionalProperties:
type: string
description: 'NodeSelector is a selector which must
be true for the vmi to fit on a node. Selector which
must match a node''s labels for the vmi to be scheduled
on that node. More info: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/'
type: object
priorityClassName:
description: If specified, indicates the pod's priority.
If not specified, the pod priority will be default
or zero if there is no default.
type: string
readinessProbe:
description: 'Periodic probe of VirtualMachineInstance
service readiness. VirtualmachineInstances will be
removed from service endpoints if the probe fails.
Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
properties:
exec:
description: One and only one of the following should
be specified. Exec specifies the action to take,
it will be executed on the guest through the qemu-guest-agent.
If the guest agent is not available, this probe
will fail.
properties:
command:
description: Command is the command line to
execute inside the container, the working
directory for the command is root ('/') in
the container's filesystem. The command is
simply exec'd, it is not run inside a shell,
so traditional shell instructions ('|', etc)
won't work. To use a shell, you need to explicitly
call out to that shell. Exit status of 0 is
treated as live/healthy and non-zero is unhealthy.
items:
type: string
type: array
type: object
failureThreshold:
description: Minimum consecutive failures for the
probe to be considered failed after having succeeded.
Defaults to 3. Minimum value is 1.
format: int32
type: integer
guestAgentPing:
description: GuestAgentPing contacts the qemu-guest-agent
for availability checks.
type: object
httpGet:
description: HTTPGet specifies the http request
to perform.
properties:
host:
description: Host name to connect to, defaults
to the pod IP. You probably want to set "Host"
in httpHeaders instead.
type: string
httpHeaders:
description: Custom headers to set in the request.
HTTP allows repeated headers.
items:
description: HTTPHeader describes a custom
header to be used in HTTP probes
properties:
name:
description: The header field name
type: string
value:
description: The header field value
type: string
required:
- name
- value
type: object
type: array
path:
description: Path to access on the HTTP server.
type: string
port:
anyOf:
- type: integer
- type: string
description: Name or number of the port to access
on the container. Number must be in the range
1 to 65535. Name must be an IANA_SVC_NAME.
x-kubernetes-int-or-string: true
scheme:
description: Scheme to use for connecting to
the host. Defaults to HTTP.
type: string
required:
- port
type: object
initialDelaySeconds:
description: 'Number of seconds after the VirtualMachineInstance
has started before liveness probes are initiated.
More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
format: int32
type: integer
periodSeconds:
description: How often (in seconds) to perform the
probe. Default to 10 seconds. Minimum value is
1.
format: int32
type: integer
successThreshold:
description: Minimum consecutive successes for the
probe to be considered successful after having
failed. Defaults to 1. Must be 1 for liveness.
Minimum value is 1.
format: int32
type: integer
tcpSocket:
description: 'TCPSocket specifies an action involving
a TCP port. TCP hooks not yet supported TODO:
implement a realistic TCP lifecycle hook'
properties:
host:
description: 'Optional: Host name to connect
to, defaults to the pod IP.'
type: string
port:
anyOf:
- type: integer
- type: string
description: Number or name of the port to access
on the container. Number must be in the range
1 to 65535. Name must be an IANA_SVC_NAME.
x-kubernetes-int-or-string: true
required:
- port
type: object
timeoutSeconds:
description: 'Number of seconds after which the
probe times out. For exec probes the timeout fails
the probe but does not terminate the command running
on the guest. This means a blocking command can
result in an increasing load on the guest. A small
buffer will be added to the resulting workload
exec probe to compensate for delays caused by
the qemu guest exec mechanism. Defaults to 1 second.
Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
format: int32
type: integer
type: object
schedulerName:
description: If specified, the VMI will be dispatched
by specified scheduler. If not specified, the VMI
will be dispatched by default scheduler.
type: string
startStrategy:
description: StartStrategy can be set to "Paused" if
Virtual Machine should be started in paused state.
type: string
subdomain:
description: If specified, the fully qualified vmi hostname
will be "<hostname>.<subdomain>.<pod namespace>.svc.<cluster
domain>". If not specified, the vmi will not have
a domainname at all. The DNS entry will resolve to
the vmi, no matter if the vmi itself can pick up a
hostname.
type: string
terminationGracePeriodSeconds:
description: Grace period observed after signalling
a VirtualMachineInstance to stop after which the VirtualMachineInstance
is force terminated.
format: int64
type: integer
tolerations:
description: If toleration is specified, obey all the
toleration rules.
items:
description: The pod this Toleration is attached to
tolerates any taint that matches the triple <key,value,effect>
using the matching operator <operator>.
properties:
effect:
description: Effect indicates the taint effect
to match. Empty means match all taint effects.
When specified, allowed values are NoSchedule,
PreferNoSchedule and NoExecute.
type: string
key:
description: Key is the taint key that the toleration
applies to. Empty means match all taint keys.
If the key is empty, operator must be Exists;
this combination means to match all values and
all keys.
type: string
operator:
description: Operator represents a key's relationship
to the value. Valid operators are Exists and
Equal. Defaults to Equal. Exists is equivalent
to wildcard for value, so that a pod can tolerate
all taints of a particular category.
type: string
tolerationSeconds:
description: TolerationSeconds represents the
period of time the toleration (which must be
of effect NoExecute, otherwise this field is
ignored) tolerates the taint. By default, it
is not set, which means tolerate the taint forever
(do not evict). Zero and negative values will
be treated as 0 (evict immediately) by the system.
format: int64
type: integer
value:
description: Value is the taint value the toleration
matches to. If the operator is Exists, the value
should be empty, otherwise just a regular string.
type: string
type: object
type: array
topologySpreadConstraints:
description: TopologySpreadConstraints describes how
a group of VMIs will be spread across a given topology
domains. K8s scheduler will schedule VMI pods in a
way which abides by the constraints.
items:
description: TopologySpreadConstraint specifies how
to spread matching pods among the given topology.
properties:
labelSelector:
description: LabelSelector is used to find matching
pods. Pods that match this label selector are
counted to determine the number of pods in their
corresponding topology domain.
properties:
matchExpressions:
description: matchExpressions is a list of
label selector requirements. The requirements
are ANDed.
items:
description: A label selector requirement
is a selector that contains values, a
key, and an operator that relates the
key and values.
properties:
key:
description: key is the label key that
the selector applies to.
type: string
operator:
description: operator represents a key's
relationship to a set of values. Valid
operators are In, NotIn, Exists and
DoesNotExist.
type: string
values:
description: values is an array of string
values. If the operator is In or NotIn,
the values array must be non-empty.
If the operator is Exists or DoesNotExist,
the values array must be empty. This
array is replaced during a strategic
merge patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value}
pairs. A single {key,value} in the matchLabels
map is equivalent to an element of matchExpressions,
whose key field is "key", the operator is
"In", and the values array contains only
"value". The requirements are ANDed.
type: object
type: object
matchLabelKeys:
description: MatchLabelKeys is a set of pod label
keys to select the pods over which spreading
will be calculated. The keys are used to lookup
values from the incoming pod labels, those key-value
labels are ANDed with labelSelector to select
the group of existing pods over which spreading
will be calculated for the incoming pod. Keys
that don't exist in the incoming pod labels
will be ignored. A null or empty list means
only match against labelSelector.
items:
type: string
type: array
x-kubernetes-list-type: atomic
maxSkew:
description: 'MaxSkew describes the degree to
which pods may be unevenly distributed. When
''whenUnsatisfiable=DoNotSchedule'', it is the
maximum permitted difference between the number
of matching pods in the target topology and
the global minimum. The global minimum is the
minimum number of matching pods in an eligible
domain or zero if the number of eligible domains
is less than MinDomains. For example, in a 3-zone
cluster, MaxSkew is set to 1, and pods with
the same labelSelector spread as 2/2/1: In this
case, the global minimum is 1. | zone1 | zone2
| zone3 | | P P | P P | P | - if MaxSkew
is 1, incoming pod can only be scheduled to
zone3 to become 2/2/2; scheduling it onto zone1(zone2)
would make the ActualSkew(3-1) on zone1(zone2)
violate MaxSkew(1). - if MaxSkew is 2, incoming
pod can be scheduled onto any zone. When ''whenUnsatisfiable=ScheduleAnyway'',
it is used to give higher precedence to topologies
that satisfy it. It''s a required field. Default
value is 1 and 0 is not allowed.'
format: int32
type: integer
minDomains:
description: "MinDomains indicates a minimum number
of eligible domains. When the number of eligible
domains with matching topology keys is less
than minDomains, Pod Topology Spread treats
\"global minimum\" as 0, and then the calculation
of Skew is performed. And when the number of
eligible domains with matching topology keys
equals or greater than minDomains, this value
has no effect on scheduling. As a result, when
the number of eligible domains is less than
minDomains, scheduler won't schedule more than
maxSkew Pods to those domains. If value is nil,
the constraint behaves as if MinDomains is equal
to 1. Valid values are integers greater than
0. When value is not nil, WhenUnsatisfiable
must be DoNotSchedule. \n For example, in a
3-zone cluster, MaxSkew is set to 2, MinDomains
is set to 5 and pods with the same labelSelector
spread as 2/2/2: | zone1 | zone2 | zone3 | |
\ P P | P P | P P | The number of domains
is less than 5(MinDomains), so \"global minimum\"
is treated as 0. In this situation, new pod
with the same labelSelector cannot be scheduled,
because computed skew will be 3(3 - 0) if new
Pod is scheduled to any of the three zones,
it will violate MaxSkew. \n This is a beta field
and requires the MinDomainsInPodTopologySpread
feature gate to be enabled (enabled by default)."
format: int32
type: integer
nodeAffinityPolicy:
description: "NodeAffinityPolicy indicates how
we will treat Pod's nodeAffinity/nodeSelector
when calculating pod topology spread skew. Options
are: - Honor: only nodes matching nodeAffinity/nodeSelector
are included in the calculations. - Ignore:
nodeAffinity/nodeSelector are ignored. All nodes
are included in the calculations. \n If this
value is nil, the behavior is equivalent to
the Honor policy. This is a beta-level feature
default enabled by the NodeInclusionPolicyInPodTopologySpread
feature flag."
type: string
nodeTaintsPolicy:
description: "NodeTaintsPolicy indicates how we
will treat node taints when calculating pod
topology spread skew. Options are: - Honor:
nodes without taints, along with tainted nodes
for which the incoming pod has a toleration,
are included. - Ignore: node taints are ignored.
All nodes are included. \n If this value is
nil, the behavior is equivalent to the Ignore
policy. This is a beta-level feature default
enabled by the NodeInclusionPolicyInPodTopologySpread
feature flag."
type: string
topologyKey:
description: TopologyKey is the key of node labels.
Nodes that have a label with this key and identical
values are considered to be in the same topology.
We consider each <key, value> as a "bucket",
and try to put balanced number of pods into
each bucket. We define a domain as a particular
instance of a topology. Also, we define an eligible
domain as a domain whose nodes meet the requirements
of nodeAffinityPolicy and nodeTaintsPolicy.
e.g. If TopologyKey is "kubernetes.io/hostname",
each Node is a domain of that topology. And,
if TopologyKey is "topology.kubernetes.io/zone",
each zone is a domain of that topology. It's
a required field.
type: string
whenUnsatisfiable:
description: 'WhenUnsatisfiable indicates how
to deal with a pod if it doesn''t satisfy the
spread constraint. - DoNotSchedule (default)
tells the scheduler not to schedule it. - ScheduleAnyway
tells the scheduler to schedule the pod in any
location, but giving higher precedence to
topologies that would help reduce the skew.
A constraint is considered "Unsatisfiable" for
an incoming pod if and only if every possible
node assignment for that pod would violate "MaxSkew"
on some topology. For example, in a 3-zone cluster,
MaxSkew is set to 1, and pods with the same
labelSelector spread as 3/1/1: | zone1 | zone2
| zone3 | | P P P | P | P | If WhenUnsatisfiable
is set to DoNotSchedule, incoming pod can only
be scheduled to zone2(zone3) to become 3/2/1(3/1/2)
as ActualSkew(2-1) on zone2(zone3) satisfies
MaxSkew(1). In other words, the cluster can
still be imbalanced, but scheduler won''t make
it *more* imbalanced. It''s a required field.'
type: string
required:
- maxSkew
- topologyKey
- whenUnsatisfiable
type: object
type: array
x-kubernetes-list-map-keys:
- topologyKey
- whenUnsatisfiable
x-kubernetes-list-type: map
volumes:
description: List of volumes that can be mounted by
disks belonging to the vmi.
items:
description: Volume represents a named volume in a
vmi.
properties:
cloudInitConfigDrive:
description: 'CloudInitConfigDrive represents
a cloud-init Config Drive user-data source.
The Config Drive data will be added as a disk
to the vmi. A proper cloud-init installation
is required inside the guest. More info: https://cloudinit.readthedocs.io/en/latest/topics/datasources/configdrive.html'
properties:
networkData:
description: NetworkData contains config drive
inline cloud-init networkdata.
type: string
networkDataBase64:
description: NetworkDataBase64 contains config
drive cloud-init networkdata as a base64
encoded string.
type: string
networkDataSecretRef:
description: NetworkDataSecretRef references
a k8s secret that contains config drive
networkdata.
properties:
name:
description: 'Name of the referent. More
info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion,
kind, uid?'
type: string
type: object
secretRef:
description: UserDataSecretRef references
a k8s secret that contains config drive
userdata.
properties:
name:
description: 'Name of the referent. More
info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion,
kind, uid?'
type: string
type: object
userData:
description: UserData contains config drive
inline cloud-init userdata.
type: string
userDataBase64:
description: UserDataBase64 contains config
drive cloud-init userdata as a base64 encoded
string.
type: string
type: object
cloudInitNoCloud:
description: 'CloudInitNoCloud represents a cloud-init
NoCloud user-data source. The NoCloud data will
be added as a disk to the vmi. A proper cloud-init
installation is required inside the guest. More
info: http://cloudinit.readthedocs.io/en/latest/topics/datasources/nocloud.html'
properties:
networkData:
description: NetworkData contains NoCloud
inline cloud-init networkdata.
type: string
networkDataBase64:
description: NetworkDataBase64 contains NoCloud
cloud-init networkdata as a base64 encoded
string.
type: string
networkDataSecretRef:
description: NetworkDataSecretRef references
a k8s secret that contains NoCloud networkdata.
properties:
name:
description: 'Name of the referent. More
info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion,
kind, uid?'
type: string
type: object
secretRef:
description: UserDataSecretRef references
a k8s secret that contains NoCloud userdata.
properties:
name:
description: 'Name of the referent. More
info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion,
kind, uid?'
type: string
type: object
userData:
description: UserData contains NoCloud inline
cloud-init userdata.
type: string
userDataBase64:
description: UserDataBase64 contains NoCloud
cloud-init userdata as a base64 encoded
string.
type: string
type: object
configMap:
description: 'ConfigMapSource represents a reference
to a ConfigMap in the same namespace. More info:
https://kubernetes.io/docs/tasks/configure-pod-container/configure-pod-configmap/'
properties:
name:
description: 'Name of the referent. More info:
https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion,
kind, uid?'
type: string
optional:
description: Specify whether the ConfigMap
or it's keys must be defined
type: boolean
volumeLabel:
description: The volume label of the resulting
disk inside the VMI. Different bootstrapping
mechanisms require different values. Typical
values are "cidata" (cloud-init), "config-2"
(cloud-init) or "OEMDRV" (kickstart).
type: string
type: object
containerDisk:
description: 'ContainerDisk references a docker
image, embedding a qcow or raw disk. More info:
https://kubevirt.gitbooks.io/user-guide/registry-disk.html'
properties:
image:
description: Image is the name of the image
with the embedded disk.
type: string
imagePullPolicy:
description: 'Image pull policy. One of Always,
Never, IfNotPresent. Defaults to Always
if :latest tag is specified, or IfNotPresent
otherwise. Cannot be updated. More info:
https://kubernetes.io/docs/concepts/containers/images#updating-images'
type: string
imagePullSecret:
description: ImagePullSecret is the name of
the Docker registry secret required to pull
the image. The secret must already exist.
type: string
path:
description: Path defines the path to disk
file in the container
type: string
required:
- image
type: object
dataVolume:
description: DataVolume represents the dynamic
creation a PVC for this volume as well as the
process of populating that PVC with a disk image.
properties:
hotpluggable:
description: Hotpluggable indicates whether
the volume can be hotplugged and hotunplugged.
type: boolean
name:
description: Name of both the DataVolume and
the PVC in the same namespace. After PVC
population the DataVolume is garbage collected
by default.
type: string
required:
- name
type: object
downwardAPI:
description: DownwardAPI represents downward API
about the pod that should populate this volume
properties:
fields:
description: Fields is a list of downward
API volume file
items:
description: DownwardAPIVolumeFile represents
information to create the file containing
the pod field
properties:
fieldRef:
description: 'Required: Selects a field
of the pod: only annotations, labels,
name and namespace are supported.'
properties:
apiVersion:
description: Version of the schema
the FieldPath is written in terms
of, defaults to "v1".
type: string
fieldPath:
description: Path of the field to
select in the specified API version.
type: string
required:
- fieldPath
type: object
mode:
description: 'Optional: mode bits used
to set permissions on this file, must
be an octal value between 0000 and
0777 or a decimal value between 0
and 511. YAML accepts both octal and
decimal values, JSON requires decimal
values for mode bits. If not specified,
the volume defaultMode will be used.
This might be in conflict with other
options that affect the file mode,
like fsGroup, and the result can be
other mode bits set.'
format: int32
type: integer
path:
description: 'Required: Path is the
relative path name of the file to
be created. Must not be absolute or
contain the ''..'' path. Must be utf-8
encoded. The first item of the relative
path must not start with ''..'''
type: string
resourceFieldRef:
description: 'Selects a resource of
the container: only resources limits
and requests (limits.cpu, limits.memory,
requests.cpu and requests.memory)
are currently supported.'
properties:
containerName:
description: 'Container name: required
for volumes, optional for env
vars'
type: string
divisor:
anyOf:
- type: integer
- type: string
description: Specifies the output
format of the exposed resources,
defaults to "1"
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
resource:
description: 'Required: resource
to select'
type: string
required:
- resource
type: object
required:
- path
type: object
type: array
volumeLabel:
description: The volume label of the resulting
disk inside the VMI. Different bootstrapping
mechanisms require different values. Typical
values are "cidata" (cloud-init), "config-2"
(cloud-init) or "OEMDRV" (kickstart).
type: string
type: object
downwardMetrics:
description: DownwardMetrics adds a very small
disk to VMIs which contains a limited view of
host and guest metrics. The disk content is
compatible with vhostmd (https://github.com/vhostmd/vhostmd)
and vm-dump-metrics.
type: object
emptyDisk:
description: 'EmptyDisk represents a temporary
disk which shares the vmis lifecycle. More info:
https://kubevirt.gitbooks.io/user-guide/disks-and-volumes.html'
properties:
capacity:
anyOf:
- type: integer
- type: string
description: Capacity of the sparse disk.
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
required:
- capacity
type: object
ephemeral:
description: Ephemeral is a special volume source
that "wraps" specified source and provides copy-on-write
image on top of it.
properties:
persistentVolumeClaim:
description: 'PersistentVolumeClaimVolumeSource
represents a reference to a PersistentVolumeClaim
in the same namespace. Directly attached
to the vmi via qemu. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
properties:
claimName:
description: 'claimName is the name of
a PersistentVolumeClaim in the same
namespace as the pod using this volume.
More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
type: string
readOnly:
description: readOnly Will force the ReadOnly
setting in VolumeMounts. Default false.
type: boolean
required:
- claimName
type: object
type: object
hostDisk:
description: HostDisk represents a disk created
on the cluster level
properties:
capacity:
anyOf:
- type: integer
- type: string
description: Capacity of the sparse disk
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
path:
description: The path to HostDisk image located
on the cluster
type: string
shared:
description: Shared indicate whether the path
is shared between nodes
type: boolean
type:
description: Contains information if disk.img
exists or should be created allowed options
are 'Disk' and 'DiskOrCreate'
type: string
required:
- path
- type
type: object
memoryDump:
description: MemoryDump is attached to the virt
launcher and is populated with a memory dump
of the vmi
properties:
claimName:
description: 'claimName is the name of a PersistentVolumeClaim
in the same namespace as the pod using this
volume. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
type: string
hotpluggable:
description: Hotpluggable indicates whether
the volume can be hotplugged and hotunplugged.
type: boolean
readOnly:
description: readOnly Will force the ReadOnly
setting in VolumeMounts. Default false.
type: boolean
required:
- claimName
type: object
name:
description: 'Volume''s name. Must be a DNS_LABEL
and unique within the vmi. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names'
type: string
persistentVolumeClaim:
description: 'PersistentVolumeClaimVolumeSource
represents a reference to a PersistentVolumeClaim
in the same namespace. Directly attached to
the vmi via qemu. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
properties:
claimName:
description: 'claimName is the name of a PersistentVolumeClaim
in the same namespace as the pod using this
volume. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
type: string
hotpluggable:
description: Hotpluggable indicates whether
the volume can be hotplugged and hotunplugged.
type: boolean
readOnly:
description: readOnly Will force the ReadOnly
setting in VolumeMounts. Default false.
type: boolean
required:
- claimName
type: object
secret:
description: 'SecretVolumeSource represents a
reference to a secret data in the same namespace.
More info: https://kubernetes.io/docs/concepts/configuration/secret/'
properties:
optional:
description: Specify whether the Secret or
it's keys must be defined
type: boolean
secretName:
description: 'Name of the secret in the pod''s
namespace to use. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret'
type: string
volumeLabel:
description: The volume label of the resulting
disk inside the VMI. Different bootstrapping
mechanisms require different values. Typical
values are "cidata" (cloud-init), "config-2"
(cloud-init) or "OEMDRV" (kickstart).
type: string
type: object
serviceAccount:
description: 'ServiceAccountVolumeSource represents
a reference to a service account. There can
only be one volume of this type! More info:
https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/'
properties:
serviceAccountName:
description: 'Name of the service account
in the pod''s namespace to use. More info:
https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/'
type: string
type: object
sysprep:
description: Represents a Sysprep volume source.
properties:
configMap:
description: ConfigMap references a ConfigMap
that contains Sysprep answer file named
autounattend.xml that should be attached
as disk of CDROM type.
properties:
name:
description: 'Name of the referent. More
info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion,
kind, uid?'
type: string
type: object
secret:
description: Secret references a k8s Secret
that contains Sysprep answer file named
autounattend.xml that should be attached
as disk of CDROM type.
properties:
name:
description: 'Name of the referent. More
info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion,
kind, uid?'
type: string
type: object
type: object
required:
- name
type: object
type: array
required:
- domain
type: object
type: object
required:
- template
type: object
status:
description: Status holds the current state of the controller and
brief information about its associated VirtualMachineInstance
properties:
conditions:
description: Hold the state information of the VirtualMachine
and its VirtualMachineInstance
items:
description: VirtualMachineCondition represents the state
of VirtualMachine
properties:
lastProbeTime:
format: date-time
nullable: true
type: string
lastTransitionTime:
format: date-time
nullable: true
type: string
message:
type: string
reason:
type: string
status:
type: string
type:
type: string
required:
- status
- type
type: object
type: array
created:
description: Created indicates if the virtual machine is created
in the cluster
type: boolean
desiredGeneration:
description: DesiredGeneration is the generation which is desired
for the VMI. This will be used in comparisons with ObservedGeneration
to understand when the VMI is out of sync. This will be changed
at the same time as ObservedGeneration to remove errors which
could occur if Generation is updated through an Update() before
ObservedGeneration in Status.
format: int64
type: integer
memoryDumpRequest:
description: MemoryDumpRequest tracks memory dump request phase
and info of getting a memory dump to the given pvc
nullable: true
properties:
claimName:
description: ClaimName is the name of the pvc that will
contain the memory dump
type: string
endTimestamp:
description: EndTimestamp represents the time the memory
dump was completed
format: date-time
type: string
fileName:
description: FileName represents the name of the output
file
type: string
message:
description: Message is a detailed message about failure
of the memory dump
type: string
phase:
description: Phase represents the memory dump phase
type: string
remove:
description: Remove represents request of dissociating the
memory dump pvc
type: boolean
startTimestamp:
description: StartTimestamp represents the time the memory
dump started
format: date-time
type: string
required:
- claimName
- phase
type: object
observedGeneration:
description: ObservedGeneration is the generation observed by
the vmi when started.
format: int64
type: integer
printableStatus:
default: Stopped
description: PrintableStatus is a human readable, high-level
representation of the status of the virtual machine
type: string
ready:
description: Ready indicates if the virtual machine is running
and ready
type: boolean
restoreInProgress:
description: RestoreInProgress is the name of the VirtualMachineRestore
currently executing
type: string
snapshotInProgress:
description: SnapshotInProgress is the name of the VirtualMachineSnapshot
currently executing
type: string
startFailure:
description: StartFailure tracks consecutive VMI startup failures
for the purposes of crash loop backoffs
nullable: true
properties:
consecutiveFailCount:
type: integer
lastFailedVMIUID:
description: UID is a type that holds unique ID values,
including UUIDs. Because we don't ONLY use UUIDs, this
is an alias to string. Being a type captures intent and
helps make sure that UIDs and names do not get conflated.
type: string
retryAfterTimestamp:
format: date-time
type: string
type: object
stateChangeRequests:
description: StateChangeRequests indicates a list of actions
that should be taken on a VMI e.g. stop a specific VMI then
start a new one.
items:
properties:
action:
description: Indicates the type of action that is requested.
e.g. Start or Stop
type: string
data:
additionalProperties:
type: string
description: Provides additional data in order to perform
the Action
type: object
uid:
description: Indicates the UUID of an existing Virtual
Machine Instance that this change request applies to
-- if applicable
type: string
required:
- action
type: object
type: array
volumeRequests:
description: VolumeRequests indicates a list of volumes add
or remove from the VMI template and hotplug on an active running
VMI.
items:
properties:
addVolumeOptions:
description: AddVolumeOptions when set indicates a volume
should be added. The details within this field specify
how to add the volume
properties:
disk:
description: Disk represents the hotplug disk that
will be plugged into the running VMI
properties:
blockSize:
description: If specified, the virtual disk will
be presented with the given block sizes.
properties:
custom:
description: CustomBlockSize represents the
desired logical and physical block size
for a VM disk.
properties:
logical:
type: integer
physical:
type: integer
required:
- logical
- physical
type: object
matchVolume:
description: Represents if a feature is enabled
or disabled.
properties:
enabled:
description: Enabled determines if the
feature should be enabled or disabled
on the guest. Defaults to true.
type: boolean
type: object
type: object
bootOrder:
description: BootOrder is an integer value > 0,
used to determine ordering of boot devices.
Lower values take precedence. Each disk or interface
that has a boot order must have a unique value.
Disks without a boot order are not tried if
a disk with a boot order exists.
type: integer
cache:
description: 'Cache specifies which kvm disk cache
mode should be used. Supported values are: CacheNone,
CacheWriteThrough.'
type: string
cdrom:
description: Attach a volume as a cdrom to the
vmi.
properties:
bus:
description: 'Bus indicates the type of disk
device to emulate. supported values: virtio,
sata, scsi.'
type: string
readonly:
description: ReadOnly. Defaults to true.
type: boolean
tray:
description: Tray indicates if the tray of
the device is open or closed. Allowed values
are "open" and "closed". Defaults to closed.
type: string
type: object
dedicatedIOThread:
description: dedicatedIOThread indicates this
disk should have an exclusive IO Thread. Enabling
this implies useIOThreads = true. Defaults to
false.
type: boolean
disk:
description: Attach a volume as a disk to the
vmi.
properties:
bus:
description: 'Bus indicates the type of disk
device to emulate. supported values: virtio,
sata, scsi, usb.'
type: string
pciAddress:
description: 'If specified, the virtual disk
will be placed on the guests pci address
with the specified PCI address. For example:
0000:81:01.10'
type: string
readonly:
description: ReadOnly. Defaults to false.
type: boolean
type: object
errorPolicy:
description: If specified, it can change the default
error policy (stop) for the disk
type: string
io:
description: 'IO specifies which QEMU disk IO
mode should be used. Supported values are: native,
default, threads.'
type: string
lun:
description: Attach a volume as a LUN to the vmi.
properties:
bus:
description: 'Bus indicates the type of disk
device to emulate. supported values: virtio,
sata, scsi.'
type: string
readonly:
description: ReadOnly. Defaults to false.
type: boolean
reservation:
description: Reservation indicates if the
disk needs to support the persistent reservation
for the SCSI disk
type: boolean
type: object
name:
description: Name is the device name
type: string
serial:
description: Serial provides the ability to specify
a serial number for the disk device.
type: string
shareable:
description: If specified the disk is made sharable
and multiple write from different VMs are permitted
type: boolean
tag:
description: If specified, disk address and its
tag will be provided to the guest via config
drive metadata
type: string
required:
- name
type: object
dryRun:
description: 'When present, indicates that modifications
should not be persisted. An invalid or unrecognized
dryRun directive will result in an error response
and no further processing of the request. Valid
values are: - All: all dry run stages will be processed'
items:
type: string
type: array
x-kubernetes-list-type: atomic
name:
description: Name represents the name that will be
used to map the disk to the corresponding volume.
This overrides any name set inside the Disk struct
itself.
type: string
volumeSource:
description: VolumeSource represents the source of
the volume to map to the disk.
properties:
dataVolume:
description: DataVolume represents the dynamic
creation a PVC for this volume as well as the
process of populating that PVC with a disk image.
properties:
hotpluggable:
description: Hotpluggable indicates whether
the volume can be hotplugged and hotunplugged.
type: boolean
name:
description: Name of both the DataVolume and
the PVC in the same namespace. After PVC
population the DataVolume is garbage collected
by default.
type: string
required:
- name
type: object
persistentVolumeClaim:
description: 'PersistentVolumeClaimVolumeSource
represents a reference to a PersistentVolumeClaim
in the same namespace. Directly attached to
the vmi via qemu. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
properties:
claimName:
description: 'claimName is the name of a PersistentVolumeClaim
in the same namespace as the pod using this
volume. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
type: string
hotpluggable:
description: Hotpluggable indicates whether
the volume can be hotplugged and hotunplugged.
type: boolean
readOnly:
description: readOnly Will force the ReadOnly
setting in VolumeMounts. Default false.
type: boolean
required:
- claimName
type: object
type: object
required:
- disk
- name
- volumeSource
type: object
removeVolumeOptions:
description: RemoveVolumeOptions when set indicates a
volume should be removed. The details within this field
specify how to add the volume
properties:
dryRun:
description: 'When present, indicates that modifications
should not be persisted. An invalid or unrecognized
dryRun directive will result in an error response
and no further processing of the request. Valid
values are: - All: all dry run stages will be processed'
items:
type: string
type: array
x-kubernetes-list-type: atomic
name:
description: Name represents the name that maps to
both the disk and volume that should be removed
type: string
required:
- name
type: object
type: object
type: array
x-kubernetes-list-type: atomic
volumeSnapshotStatuses:
description: VolumeSnapshotStatuses indicates a list of statuses
whether snapshotting is supported by each volume.
items:
properties:
enabled:
description: True if the volume supports snapshotting
type: boolean
name:
description: Volume name
type: string
reason:
description: Empty if snapshotting is enabled, contains
reason otherwise
type: string
required:
- enabled
- name
type: object
type: array
type: object
type: object
type: object
virtualMachineSnapshotName:
type: string
volumeBackups:
items:
description: VolumeBackup contains the data neeed to restore a PVC
properties:
persistentVolumeClaim:
properties:
metadata:
description: 'Standard object''s metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata'
type: object
x-kubernetes-preserve-unknown-fields: true
spec:
description: 'Spec defines the desired characteristics of a volume
requested by a pod author. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
properties:
accessModes:
description: 'accessModes contains the desired access modes
the volume should have. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1'
items:
type: string
type: array
dataSource:
description: 'dataSource field can be used to specify either:
* An existing VolumeSnapshot object (snapshot.storage.k8s.io/VolumeSnapshot)
* An existing PVC (PersistentVolumeClaim) If the provisioner
or an external controller can support the specified data
source, it will create a new volume based on the contents
of the specified data source. When the AnyVolumeDataSource
feature gate is enabled, dataSource contents will be copied
to dataSourceRef, and dataSourceRef contents will be copied
to dataSource when dataSourceRef.namespace is not specified.
If the namespace is specified, then dataSourceRef will not
be copied to dataSource.'
properties:
apiGroup:
description: APIGroup is the group for the resource being
referenced. If APIGroup is not specified, the specified
Kind must be in the core API group. For any other third-party
types, APIGroup is required.
type: string
kind:
description: Kind is the type of resource being referenced
type: string
name:
description: Name is the name of resource being referenced
type: string
required:
- kind
- name
type: object
dataSourceRef:
description: 'dataSourceRef specifies the object from which
to populate the volume with data, if a non-empty volume
is desired. This may be any object from a non-empty API
group (non core object) or a PersistentVolumeClaim object.
When this field is specified, volume binding will only succeed
if the type of the specified object matches some installed
volume populator or dynamic provisioner. This field will
replace the functionality of the dataSource field and as
such if both fields are non-empty, they must have the same
value. For backwards compatibility, when namespace isn''t
specified in dataSourceRef, both fields (dataSource and
dataSourceRef) will be set to the same value automatically
if one of them is empty and the other is non-empty. When
namespace is specified in dataSourceRef, dataSource isn''t
set to the same value and must be empty. There are three
important differences between dataSource and dataSourceRef:
* While dataSource only allows two specific types of objects,
dataSourceRef allows any non-core object, as well as PersistentVolumeClaim
objects. * While dataSource ignores disallowed values (dropping
them), dataSourceRef preserves all values, and generates
an error if a disallowed value is specified. * While dataSource
only allows local objects, dataSourceRef allows objects in
any namespaces. (Beta) Using this field requires the AnyVolumeDataSource
feature gate to be enabled. (Alpha) Using the namespace
field of dataSourceRef requires the CrossNamespaceVolumeDataSource
feature gate to be enabled.'
properties:
apiGroup:
description: APIGroup is the group for the resource being
referenced. If APIGroup is not specified, the specified
Kind must be in the core API group. For any other third-party
types, APIGroup is required.
type: string
kind:
description: Kind is the type of resource being referenced
type: string
name:
description: Name is the name of resource being referenced
type: string
namespace:
description: Namespace is the namespace of resource being
referenced Note that when a namespace is specified,
a gateway.networking.k8s.io/ReferenceGrant object is
required in the referent namespace to allow that namespace's
owner to accept the reference. See the ReferenceGrant
documentation for details. (Alpha) This field requires
the CrossNamespaceVolumeDataSource feature gate to be
enabled.
type: string
required:
- kind
- name
type: object
resources:
description: 'resources represents the minimum resources the
volume should have. If RecoverVolumeExpansionFailure feature
is enabled users are allowed to specify resource requirements
that are lower than previous value but must still be higher
than capacity recorded in the status field of the claim.
More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources'
properties:
claims:
description: "Claims lists the names of resources, defined
in spec.resourceClaims, that are used by this container.
\n This is an alpha field and requires enabling the
DynamicResourceAllocation feature gate. \n This field
is immutable. It can only be set for containers."
items:
description: ResourceClaim references one entry in PodSpec.ResourceClaims.
properties:
name:
description: Name must match the name of one entry
in pod.spec.resourceClaims of the Pod where this
field is used. It makes that resource available
inside a container.
type: string
required:
- name
type: object
type: array
x-kubernetes-list-map-keys:
- name
x-kubernetes-list-type: map
limits:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: 'Limits describes the maximum amount of compute
resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
type: object
requests:
additionalProperties:
anyOf:
- type: integer
- type: string
pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
x-kubernetes-int-or-string: true
description: 'Requests describes the minimum amount of
compute resources required. If Requests is omitted for
a container, it defaults to Limits if that is explicitly
specified, otherwise to an implementation-defined value.
More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
type: object
type: object
selector:
description: selector is a label query over volumes to consider
for binding.
properties:
matchExpressions:
description: matchExpressions is a list of label selector
requirements. The requirements are ANDed.
items:
description: A label selector requirement is a selector
that contains values, a key, and an operator that
relates the key and values.
properties:
key:
description: key is the label key that the selector
applies to.
type: string
operator:
description: operator represents a key's relationship
to a set of values. Valid operators are In, NotIn,
Exists and DoesNotExist.
type: string
values:
description: values is an array of string values.
If the operator is In or NotIn, the values array
must be non-empty. If the operator is Exists or
DoesNotExist, the values array must be empty.
This array is replaced during a strategic merge
patch.
items:
type: string
type: array
required:
- key
- operator
type: object
type: array
matchLabels:
additionalProperties:
type: string
description: matchLabels is a map of {key,value} pairs.
A single {key,value} in the matchLabels map is equivalent
to an element of matchExpressions, whose key field is
"key", the operator is "In", and the values array contains
only "value". The requirements are ANDed.
type: object
type: object
storageClassName:
description: 'storageClassName is the name of the StorageClass
required by the claim. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#class-1'
type: string
volumeMode:
description: volumeMode defines what type of volume is required
by the claim. Value of Filesystem is implied when not included
in claim spec.
type: string
volumeName:
description: volumeName is the binding reference to the PersistentVolume
backing this claim.
type: string
type: object
type: object
volumeName:
type: string
volumeSnapshotName:
type: string
required:
- persistentVolumeClaim
- volumeName
type: object
type: array
required:
- source
type: object
status:
description: VirtualMachineSnapshotContentStatus is the status for a VirtualMachineSnapshotStatus
resource
properties:
creationTime:
format: date-time
nullable: true
type: string
error:
description: Error is the last error encountered during the snapshot/restore
properties:
message:
type: string
time:
format: date-time
type: string
type: object
readyToUse:
type: boolean
volumeSnapshotStatus:
items:
description: VolumeSnapshotStatus is the status of a VolumeSnapshot
properties:
creationTime:
format: date-time
nullable: true
type: string
error:
description: Error is the last error encountered during the snapshot/restore
properties:
message:
type: string
time:
format: date-time
type: string
type: object
readyToUse:
type: boolean
volumeSnapshotName:
type: string
required:
- volumeSnapshotName
type: object
type: array
type: object
required:
- spec
type: object
`,
}
Functions ¶
func GetAllRoutes ¶ added in v0.55.0
func GetAllSCC ¶
func GetAllSCC(namespace string) []*secv1.SecurityContextConstraints
func LoadCertificates ¶
func LoadCertificates(secret *k8sv1.Secret) (serverCrt *tls.Certificate, err error)
func MergeCABundle ¶
func NewApiServerDeployment ¶
func NewApiServerDeployment(namespace, repository, imagePrefix, version, productName, productVersion, productComponent, image string, pullPolicy corev1.PullPolicy, imagePullSecrets []corev1.LocalObjectReference, verbosity string, extraEnv map[string]string) (*appsv1.Deployment, error)
func NewApiServerService ¶
func NewCACertSecrets ¶ added in v0.55.0
func NewCAConfigMaps ¶ added in v0.55.0
func NewCertSecrets ¶
func NewClusterInstancetypes ¶ added in v1.1.0
func NewClusterInstancetypes() ([]*instancetypev1beta1.VirtualMachineClusterInstancetype, error)
func NewClusterPreferences ¶ added in v1.1.0
func NewClusterPreferences() ([]*instancetypev1beta1.VirtualMachineClusterPreference, error)
func NewControllerDeployment ¶
func NewControllerDeployment(namespace, repository, imagePrefix, controllerVersion, launcherVersion, exportServerVersion, productName, productVersion, productComponent, image, launcherImage, exporterImage string, pullPolicy corev1.PullPolicy, imagePullSecrets []corev1.LocalObjectReference, verbosity string, extraEnv map[string]string) (*appsv1.Deployment, error)
func NewExportProxyDeployment ¶ added in v0.55.0
func NewExportProxyDeployment(namespace, repository, imagePrefix, version, productName, productVersion, productComponent, image string, pullPolicy corev1.PullPolicy, imagePullSecrets []corev1.LocalObjectReference, verbosity string, extraEnv map[string]string) (*appsv1.Deployment, error)
func NewExportProxyRoute ¶ added in v0.55.0
func NewExportProxyService ¶ added in v0.55.0
func NewHandlerDaemonSet ¶
func NewHandlerDaemonSet(namespace, repository, imagePrefix, version, launcherVersion, prHelperVersion, productName, productVersion, productComponent, image, launcherImage, prHelperImage string, pullPolicy corev1.PullPolicy, imagePullSecrets []corev1.LocalObjectReference, migrationNetwork *string, verbosity string, extraEnv map[string]string, enablePrHelper bool) (*appsv1.DaemonSet, error)
func NewKubeVirtControllerSCC ¶
func NewKubeVirtControllerSCC(namespace string) *secv1.SecurityContextConstraints
func NewKubeVirtCrd ¶
func NewKubeVirtCrd() (*extv1.CustomResourceDefinition, error)
Used by manifest generation If you change something here, you probably need to change the CSV manifest too, see /manifests/release/kubevirt.VERSION.csv.yaml.in
func NewKubeVirtHandlerSCC ¶
func NewKubeVirtHandlerSCC(namespace string) *secv1.SecurityContextConstraints
func NewKubeVirtPriorityClassCR ¶
func NewKubeVirtPriorityClassCR() *schedulingv1.PriorityClass
NewKubeVirtPriorityClassCR is used for manifest generation
func NewMigrationPolicyCrd ¶ added in v0.49.0
func NewMigrationPolicyCrd() (*extv1.CustomResourceDefinition, error)
func NewOperatorDeployment ¶
func NewOperatorDeployment(namespace, repository, imagePrefix, version, verbosity, kubeVirtVersionEnv, virtApiShaEnv, virtControllerShaEnv, virtHandlerShaEnv, virtLauncherShaEnv, virtExportProxyShaEnv, virtExportServerShaEnv, gsShaEnv, prHelperShaEnv, runbookURLTemplate, virtApiImageEnv, virtControllerImageEnv, virtHandlerImageEnv, virtLauncherImageEnv, virtExportProxyImageEnv, virtExportServerImageEnv, gsImage, prHelperImage, image string, pullPolicy corev1.PullPolicy) (*appsv1.Deployment, error)
Used for manifest generation only
func NewOpertorValidatingWebhookConfiguration ¶
func NewOpertorValidatingWebhookConfiguration(operatorNamespace string) *admissionregistrationv1.ValidatingWebhookConfiguration
func NewPodDisruptionBudgetForDeployment ¶
func NewPodDisruptionBudgetForDeployment(deployment *appsv1.Deployment) *policyv1.PodDisruptionBudget
func NewPresetCrd ¶
func NewPresetCrd() (*extv1.CustomResourceDefinition, error)
func NewPrometheusService ¶
func NewReplicaSetCrd ¶
func NewReplicaSetCrd() (*extv1.CustomResourceDefinition, error)
func NewServiceMonitorCR ¶
func NewServiceMonitorCR(namespace string, monitorNamespace string, insecureSkipVerify bool) *promv1.ServiceMonitor
func NewVirtAPIAPIServices ¶
func NewVirtAPIAPIServices(installNamespace string) []*apiregv1.APIService
func NewVirtAPIMutatingWebhookConfiguration ¶
func NewVirtAPIMutatingWebhookConfiguration(installNamespace string) *admissionregistrationv1.MutatingWebhookConfiguration
func NewVirtAPIValidatingWebhookConfiguration ¶
func NewVirtAPIValidatingWebhookConfiguration(installNamespace string) *admissionregistrationv1.ValidatingWebhookConfiguration
func NewVirtualMachineCloneCrd ¶ added in v0.55.0
func NewVirtualMachineCloneCrd() (*extv1.CustomResourceDefinition, error)
func NewVirtualMachineClusterInstancetypeCrd ¶ added in v0.56.0
func NewVirtualMachineClusterInstancetypeCrd() (*extv1.CustomResourceDefinition, error)
func NewVirtualMachineClusterPreferenceCrd ¶ added in v0.54.0
func NewVirtualMachineClusterPreferenceCrd() (*extv1.CustomResourceDefinition, error)
func NewVirtualMachineCrd ¶
func NewVirtualMachineCrd() (*extv1.CustomResourceDefinition, error)
func NewVirtualMachineExportCrd ¶ added in v0.55.0
func NewVirtualMachineExportCrd() (*extv1.CustomResourceDefinition, error)
func NewVirtualMachineInstanceCrd ¶
func NewVirtualMachineInstanceCrd() (*extv1.CustomResourceDefinition, error)
func NewVirtualMachineInstanceMigrationCrd ¶
func NewVirtualMachineInstanceMigrationCrd() (*extv1.CustomResourceDefinition, error)
func NewVirtualMachineInstancetypeCrd ¶ added in v0.56.0
func NewVirtualMachineInstancetypeCrd() (*extv1.CustomResourceDefinition, error)
func NewVirtualMachinePoolCrd ¶ added in v0.49.0
func NewVirtualMachinePoolCrd() (*extv1.CustomResourceDefinition, error)
func NewVirtualMachinePreferenceCrd ¶ added in v0.54.0
func NewVirtualMachinePreferenceCrd() (*extv1.CustomResourceDefinition, error)
func NewVirtualMachineRestoreCrd ¶
func NewVirtualMachineRestoreCrd() (*extv1.CustomResourceDefinition, error)
func NewVirtualMachineSnapshotContentCrd ¶
func NewVirtualMachineSnapshotContentCrd() (*extv1.CustomResourceDefinition, error)
func NewVirtualMachineSnapshotCrd ¶
func NewVirtualMachineSnapshotCrd() (*extv1.CustomResourceDefinition, error)
func NextRotationDeadline ¶
func NextRotationDeadline(cert *tls.Certificate, ca *tls.Certificate, renewBefore *metav1.Duration, caRenewBefore *metav1.Duration) time.Time
nextRotationDeadline returns a value for the threshold at which the current certificate should be rotated, 80% of the expiration of the certificate.
func RenderPrHelperContainer ¶ added in v1.0.0
func RenderPrHelperContainer(image string, pullPolicy corev1.PullPolicy) corev1.Container
func ValidateSecret ¶
Types ¶
type CertificateCreationCallback ¶
type CertificateCreationCallback func(secret *k8sv1.Secret, caCert *tls.Certificate, duration time.Duration) (cert *x509.Certificate, key *ecdsa.PrivateKey)
Source Files
Click to show internal directories.
Click to hide internal directories.