wallettx

package
v0.0.0-...-a838072 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Sep 19, 2019 License: Unlicense Imports: 30 Imported by: 0

README

wallet

[Build Status] (https://travis-ci.org/btcsuite/btcwallet)

Feature Overview

TODO: Flesh out this section

Documentation

[GoDoc] (http://godoc.org/git.parallelcoin.io/dev/pod/walletmain/wallet)

Full go doc style documentation for the project can be viewed online without installing this package by using the GoDoc site here: http://godoc.org/git.parallelcoin.io/dev/pod/walletmain/wallet

You can also view the documentation locally once the package is installed with the godoc tool by running godoc -http=":6060" and pointing your browser to http://localhost:6060/pkg/git.parallelcoin.io/dev/pod/walletmain/wallet

Installation

$ go get git.parallelcoin.io/dev/pod/walletmain/wallet

Package wallet is licensed under the copyfree ISC License.

Documentation

Overview

Package wallettx provides ... TODO: Flesh out this section

Overview

Index

Constants

View Source
const (
	// InsecurePubPassphrase is the default outer encryption passphrase used
	// for public data (everything but private keys).  Using a non-default
	// public passphrase can prevent an attacker without the public
	// passphrase from discovering all past and future wallet addresses if
	// they gain access to the wallet database.
	//
	// NOTE: at time of writing, public encryption only applies to public
	// data in the waddrmgr namespace.  Transactions are not yet encrypted.
	InsecurePubPassphrase = ""
)
View Source
const (
	WalletDbName = "wallet.db"
)

A bunch of constants

Variables

View Source
var (
	// ErrLoaded describes the error condition of attempting to load or
	// create a wallet when the loader has already done so.
	ErrLoaded = errors.New("wallet already loaded")
	// ErrNotLoaded describes the error condition of attempting to close a
	// loaded wallet when a wallet has not been loaded.
	ErrNotLoaded = errors.New("wallet is not loaded")
	// ErrExists describes the error condition of attempting to create a new
	// wallet when one exists already.
	ErrExists = errors.New("wallet already exists")
)
View Source
var (
	// ErrNotSynced describes an error where an operation cannot complete
	// due wallet being out of sync (and perhaps currently syncing with)
	// the remote chain server.
	ErrNotSynced = errors.New("wallet is not synchronized with the chain server")
)
View Source
var Log = cl.NewSubSystem(pkgs.Name(_d), "info")

Functions

func Create

func Create(db walletdb.DB, pubPass, privPass, seed []byte, params *netparams.Params,
	birthday time.Time) error

Create creates an new wallet, writing it to an empty database. If the passed seed is non-nil, it is used. Otherwise, a secure random seed of the recommended length is generated.

func UseLogger

func UseLogger(logger *cl.SubSystem)

UseLogger uses a specified Logger to output package logging info. This should be used in preference to SetLogWriter if the caller is also using log.

Types

type AccountBalance

type AccountBalance struct {
	Account      uint32
	TotalBalance util.Amount
}

AccountBalance associates a total (zero confirmation) balance with an account. Balances for other minimum confirmation counts require more expensive logic and it is not clear which minimums a client is interested in, so they are not included.

type AccountBalanceResult

type AccountBalanceResult struct {
	AccountNumber  uint32
	AccountName    string
	AccountBalance util.Amount
}

AccountBalanceResult is a single result for the Wallet.AccountBalances method.

type AccountNotification

type AccountNotification struct {
	AccountNumber    uint32
	AccountName      string
	ExternalKeyCount uint32
	InternalKeyCount uint32
	ImportedKeyCount uint32
}

AccountNotification contains properties regarding an account, such as its name and the number of derived and imported keys. When any of these properties change, the notification is fired.

type AccountNotificationsClient

type AccountNotificationsClient struct {
	C chan *AccountNotification
	// contains filtered or unexported fields
}

AccountNotificationsClient receives AccountNotifications over the channel C.

func (*AccountNotificationsClient) Done

func (c *AccountNotificationsClient) Done()

Done deregisters the client from the server and drains any remaining messages. It must be called exactly once when the client is finished receiving notifications.

type AccountResult

type AccountResult struct {
	waddrmgr.AccountProperties
	TotalBalance util.Amount
}

AccountResult is a single account result for the AccountsResult type.

type AccountTotalReceivedResult

type AccountTotalReceivedResult struct {
	AccountNumber    uint32
	AccountName      string
	TotalReceived    util.Amount
	LastConfirmation int32
}

AccountTotalReceivedResult is a single result for the Wallet.TotalReceivedForAccounts method.

type AccountsResult

type AccountsResult struct {
	Accounts           []AccountResult
	CurrentBlockHash   *chainhash.Hash
	CurrentBlockHeight int32
}

AccountsResult is the resutl of the wallet's Accounts method. See that method for more details.

type Balances

type Balances struct {
	Total          util.Amount
	Spendable      util.Amount
	ImmatureReward util.Amount
}

Balances records total, spendable (by policy), and immature coinbase reward balance amounts.

type Block

type Block struct {
	Hash         *chainhash.Hash
	Height       int32
	Timestamp    int64
	Transactions []TransactionSummary
}

Block contains the properties and all relevant transactions of an attached block.

type BlockIdentifier

type BlockIdentifier struct {
	// contains filtered or unexported fields
}

BlockIdentifier identifies a block by either a height or a hash.

func NewBlockIdentifierFromHash

func NewBlockIdentifierFromHash(hash *chainhash.Hash) *BlockIdentifier

NewBlockIdentifierFromHash constructs a BlockIdentifier for a block hash.

func NewBlockIdentifierFromHeight

func NewBlockIdentifierFromHeight(height int32) *BlockIdentifier

NewBlockIdentifierFromHeight constructs a BlockIdentifier for a block height.

type BlockIdentity

type BlockIdentity struct {
	Hash   chainhash.Hash
	Height int32
}

BlockIdentity identifies a block, or the lack of one (used to describe an unmined transaction).

func (*BlockIdentity) None

func (b *BlockIdentity) None() bool

None returns whether there is no block described by the instance. When associated with a transaction, this indicates the transaction is unmined.

type BranchRecoveryState

type BranchRecoveryState struct {
	// contains filtered or unexported fields
}

BranchRecoveryState maintains the required state in-order to properly recover addresses derived from a particular account's internal or external derivation branch.

A branch recovery state supports operations for:

  • Expanding the look-ahead horizon based on which indexes have been found.
  • Registering derived addresses with indexes within the horizon.
  • Reporting an invalid child index that falls into the horizon.
  • Reporting that an address has been found.
  • Retrieving all currently derived addresses for the branch.
  • Looking up a particular address by its child index.

func NewBranchRecoveryState

func NewBranchRecoveryState(recoveryWindow uint32) *BranchRecoveryState

NewBranchRecoveryState creates a new BranchRecoveryState that can be used to track either the external or internal branch of an account's derivation path.

func (*BranchRecoveryState) AddAddr

func (brs *BranchRecoveryState) AddAddr(index uint32, addr util.Address)

AddAddr adds a freshly derived address from our lookahead into the map of known addresses for this branch.

func (*BranchRecoveryState) Addrs

func (brs *BranchRecoveryState) Addrs() map[uint32]util.Address

Addrs returns a map of all currently derived child indexes to the their corresponding addresses.

func (*BranchRecoveryState) ExtendHorizon

func (brs *BranchRecoveryState) ExtendHorizon() (uint32, uint32)

ExtendHorizon returns the current horizon and the number of addresses that must be derived in order to maintain the desired recovery window.

func (*BranchRecoveryState) GetAddr

func (brs *BranchRecoveryState) GetAddr(index uint32) util.Address

GetAddr returns the address derived from a given child index.

func (*BranchRecoveryState) MarkInvalidChild

func (brs *BranchRecoveryState) MarkInvalidChild(index uint32)

MarkInvalidChild records that a particular child index results in deriving an invalid address. In addition, the branch's horizon is increment, as we expect the caller to perform an additional derivation to replace the invalid child. This is used to ensure that we are always have the proper lookahead when an invalid child is encountered.

func (*BranchRecoveryState) NextUnfound

func (brs *BranchRecoveryState) NextUnfound() uint32

NextUnfound returns the child index of the successor to the highest found child index.

func (*BranchRecoveryState) NumInvalidInHorizon

func (brs *BranchRecoveryState) NumInvalidInHorizon() uint32

NumInvalidInHorizon computes the number of invalid child indexes that lie between the last found and current horizon. This informs how many additional indexes to derive in order to maintain the proper number of valid addresses within our horizon.

func (*BranchRecoveryState) ReportFound

func (brs *BranchRecoveryState) ReportFound(index uint32)

ReportFound updates the last found index if the reported index exceeds the current value.

type CreditCategory

type CreditCategory byte

CreditCategory describes the type of wallet transaction output. The category of "sent transactions" (debits) is always "send", and is not expressed by this type.

TODO: This is a requirement of the RPC server and should be moved.

const (
	CreditReceive CreditCategory = iota
	CreditGenerate
	CreditImmature
)

These constants define the possible credit categories.

func RecvCategory

func RecvCategory(details *wtxmgr.TxDetails, syncHeight int32, net *netparams.Params) CreditCategory

RecvCategory returns the category of received credit outputs from a transaction record. The passed block chain height is used to distinguish immature from mature coinbase outputs.

TODO: This is intended for use by the RPC server and should be moved out of this package at a later time.

func (CreditCategory) String

func (c CreditCategory) String() string

String returns the category as a string. This string may be used as the JSON string for categories as part of listtransactions and gettransaction RPC responses.

type GetTransactionsResult

type GetTransactionsResult struct {
	MinedTransactions   []Block
	UnminedTransactions []TransactionSummary
}

GetTransactionsResult is the result of the wallet's GetTransactions method. See GetTransactions for more details.

type Loader

type Loader struct {
	// contains filtered or unexported fields
}

Loader implements the creating of new and opening of existing wallets, while providing a callback system for other subsystems to handle the loading of a wallet. This is primarily intended for use by the RPC servers, to enable methods and services which require the wallet when the wallet is loaded by another subsystem.

Loader is safe for concurrent access.

func NewLoader

func NewLoader(chainParams *netparams.Params, dbDirPath string,
	recoveryWindow uint32) *Loader

NewLoader constructs a Loader with an optional recovery window. If the recovery window is non-zero, the wallet will attempt to recovery addresses starting from the last SyncedTo height.

func (*Loader) CreateNewWallet

func (l *Loader) CreateNewWallet(pubPassphrase, privPassphrase, seed []byte, bday time.Time) (*Wallet, error)

CreateNewWallet creates a new wallet using the provided public and private passphrases. The seed is optional. If non-nil, addresses are derived from this seed. If nil, a secure random seed is generated.

func (*Loader) LoadedWallet

func (l *Loader) LoadedWallet() (*Wallet, bool)

LoadedWallet returns the loaded wallet, if any, and a bool for whether the wallet has been loaded or not. If true, the wallet pointer should be safe to dereference.

func (*Loader) OpenExistingWallet

func (l *Loader) OpenExistingWallet(pubPassphrase []byte, canConsolePrompt bool) (*Wallet, error)

OpenExistingWallet opens the wallet from the loader's wallet database path and the public passphrase. If the loader is being called by a context where standard input prompts may be used during wallet upgrades, setting canConsolePrompt will enables these prompts.

func (*Loader) RunAfterLoad

func (l *Loader) RunAfterLoad(fn func(*Wallet))

RunAfterLoad adds a function to be executed when the loader creates or opens a wallet. Functions are executed in a single goroutine in the order they are added.

func (*Loader) UnloadWallet

func (l *Loader) UnloadWallet() error

UnloadWallet stops the loaded wallet, if any, and closes the wallet database. This returns ErrNotLoaded if the wallet has not been loaded with CreateNewWallet or LoadExistingWallet. The Loader may be reused if this function returns without error.

func (*Loader) WalletExists

func (l *Loader) WalletExists() (bool, error)

WalletExists returns whether a file exists at the loader's database path. This may return an error for unexpected I/O failures.

type NotificationServer

type NotificationServer struct {
	// contains filtered or unexported fields
}

NotificationServer is a server that interested clients may hook into to receive notifications of changes in a wallet. A client is created for each registered notification. Clients are guaranteed to receive messages in the order wallet created them, but there is no guaranteed synchronization between different clients.

func (*NotificationServer) AccountNotifications

func (s *NotificationServer) AccountNotifications() AccountNotificationsClient

AccountNotifications returns a client for receiving AccountNotifications over a channel. The channel is unbuffered. When finished, the client's Done method should be called to disassociate the client from the server.

func (*NotificationServer) AccountSpentnessNotifications

func (s *NotificationServer) AccountSpentnessNotifications(account uint32) SpentnessNotificationsClient

AccountSpentnessNotifications registers a client for spentness changes of outputs controlled by the account.

func (*NotificationServer) TransactionNotifications

func (s *NotificationServer) TransactionNotifications() TransactionNotificationsClient

TransactionNotifications returns a client for receiving TransactionNotifiations notifications over a channel. The channel is unbuffered.

When finished, the Done method should be called on the client to disassociate it from the server.

type OutputKind

type OutputKind byte

OutputKind describes a kind of transaction output. This is used to differentiate between coinbase, stakebase, and normal outputs.

const (
	OutputKindNormal OutputKind = iota
	OutputKindCoinbase
)

Defined OutputKind constants

type OutputRedeemer

type OutputRedeemer struct {
	TxHash     chainhash.Hash
	InputIndex uint32
}

OutputRedeemer identifies the transaction input which redeems an output.

type OutputSelectionPolicy

type OutputSelectionPolicy struct {
	Account               uint32
	RequiredConfirmations int32
}

OutputSelectionPolicy describes the rules for selecting an output from the wallet.

type P2SHMultiSigOutput

type P2SHMultiSigOutput struct {
	// TODO: Add a TransactionOutput member to this struct and remove these
	// fields which are duplicated by it.  This improves consistency.  Only
	// not done now because wtxmgr APIs don't support an efficient way of
	// fetching other Transactionoutput data together with the rest of the
	// multisig info.
	OutPoint        wire.OutPoint
	OutputAmount    util.Amount
	ContainingBlock BlockIdentity
	P2SHAddress     *util.AddressScriptHash
	RedeemScript    []byte
	M, N            uint8           // M of N signatures required to redeem
	Redeemer        *OutputRedeemer // nil unless spent
}

P2SHMultiSigOutput describes a transaction output with a pay-to-script-hash output script and an imported redemption script. Along with common details of the output, this structure also includes the P2SH address the script was created from and the number of signatures required to redeem it.

TODO: Could be useful to return how many of the required signatures can be created by this wallet.

type RecoveryManager

type RecoveryManager struct {
	// contains filtered or unexported fields
}

RecoveryManager maintains the state required to recover previously used addresses, and coordinates batched processing of the blocks to search.

func NewRecoveryManager

func NewRecoveryManager(recoveryWindow, batchSize uint32,
	chainParams *netparams.Params) *RecoveryManager

NewRecoveryManager initializes a new RecoveryManager with a derivation look-ahead of `recoveryWindow` child indexes, and pre-allocates a backing array for `batchSize` blocks to scan at once.

func (*RecoveryManager) AddToBlockBatch

func (rm *RecoveryManager) AddToBlockBatch(hash *chainhash.Hash, height int32,
	timestamp time.Time)

AddToBlockBatch appends the block information, consisting of hash and height, to the batch of blocks to be searched.

func (*RecoveryManager) BlockBatch

func (rm *RecoveryManager) BlockBatch() []wtxmgr.BlockMeta

BlockBatch returns a buffer of blocks that have not yet been searched.

func (*RecoveryManager) ResetBlockBatch

func (rm *RecoveryManager) ResetBlockBatch()

ResetBlockBatch resets the internal block buffer to conserve memory.

func (*RecoveryManager) Resurrect

func (rm *RecoveryManager) Resurrect(ns walletdb.ReadBucket,
	scopedMgrs map[waddrmgr.KeyScope]*waddrmgr.ScopedKeyManager,
	credits []wtxmgr.Credit) error

Resurrect restores all known addresses for the provided scopes that can be found in the walletdb namespace, in addition to restoring all outpoints that have been previously found. This method ensures that the recovery state's horizons properly start from the last found address of a prior recovery attempt.

func (*RecoveryManager) State

func (rm *RecoveryManager) State() *RecoveryState

State returns the current RecoveryState.

type RecoveryState

type RecoveryState struct {
	// contains filtered or unexported fields
}

RecoveryState manages the initialization and lookup of ScopeRecoveryStates for any actively used key scopes.

In order to ensure that all addresses are properly recovered, the window should be sized as the sum of maximum possible inter-block and intra-block gap between used addresses of a particular branch.

These are defined as:

  • Inter-Block Gap: The maximum difference between the derived child indexes of the last addresses used in any block and the next address consumed by a later block.
  • Intra-Block Gap: The maximum difference between the derived child indexes of the first address used in any block and the last address used in the same block.

func NewRecoveryState

func NewRecoveryState(recoveryWindow uint32) *RecoveryState

NewRecoveryState creates a new RecoveryState using the provided recoveryWindow. Each RecoveryState that is subsequently initialized for a particular key scope will receive the same recoveryWindow.

func (*RecoveryState) AddWatchedOutPoint

func (rs *RecoveryState) AddWatchedOutPoint(outPoint *wire.OutPoint,
	addr util.Address)

AddWatchedOutPoint updates the recovery state's set of known outpoints that we will monitor for spends during recovery.

func (*RecoveryState) StateForScope

func (rs *RecoveryState) StateForScope(
	keyScope waddrmgr.KeyScope) *ScopeRecoveryState

StateForScope returns a ScopeRecoveryState for the provided key scope. If one does not already exist, a new one will be generated with the RecoveryState's recoveryWindow.

func (*RecoveryState) WatchedOutPoints

func (rs *RecoveryState) WatchedOutPoints() map[wire.OutPoint]util.Address

WatchedOutPoints returns the global set of outpoints that are known to belong to the wallet during recovery.

type RescanFinishedMsg

type RescanFinishedMsg struct {
	Addresses    []util.Address
	Notification *chain.RescanFinished
}

RescanFinishedMsg reports the addresses that were rescanned when a rescanfinished message was received rescanning a batch of addresses.

type RescanJob

type RescanJob struct {
	InitialSync bool
	Addrs       []util.Address
	OutPoints   map[wire.OutPoint]util.Address
	BlockStamp  waddrmgr.BlockStamp
	// contains filtered or unexported fields
}

RescanJob is a job to be processed by the RescanManager. The job includes a set of wallet addresses, a starting height to begin the rescan, and outpoints spendable by the addresses thought to be unspent. After the rescan completes, the error result of the rescan RPC is sent on the Err channel.

type RescanProgressMsg

type RescanProgressMsg struct {
	Addresses    []util.Address
	Notification *chain.RescanProgress
}

RescanProgressMsg reports the current progress made by a rescan for a set of wallet addresses.

type ScopeRecoveryState

type ScopeRecoveryState struct {
	// ExternalBranch is the recovery state of addresses generated for
	// external use, i.e. receiving addresses.
	ExternalBranch *BranchRecoveryState
	// InternalBranch is the recovery state of addresses generated for
	// internal use, i.e. change addresses.
	InternalBranch *BranchRecoveryState
}

ScopeRecoveryState is used to manage the recovery of addresses generated under a particular BIP32 account. Each account tracks both an external and internal branch recovery state, both of which use the same recovery window.

func NewScopeRecoveryState

func NewScopeRecoveryState(recoveryWindow uint32) *ScopeRecoveryState

NewScopeRecoveryState initializes an ScopeRecoveryState with the chosen recovery window.

type SignatureError

type SignatureError struct {
	InputIndex uint32
	Error      error
}

SignatureError records the underlying error when validating a transaction input signature.

type SpentnessNotifications

type SpentnessNotifications struct {
	// contains filtered or unexported fields
}

SpentnessNotifications is a notification that is fired for transaction outputs controlled by some account's keys. The notification may be about a newly added unspent transaction output or that a previously unspent output is now spent. When spent, the notification includes the spending transaction's hash and input index.

func (*SpentnessNotifications) Hash

Hash returns the transaction hash of the spent output.

func (*SpentnessNotifications) Index

func (n *SpentnessNotifications) Index() uint32

Index returns the transaction output index of the spent output.

func (*SpentnessNotifications) Spender

func (n *SpentnessNotifications) Spender() (*chainhash.Hash, uint32, bool)

Spender returns the spending transction's hash and input index, if any. If the output is unspent, the final bool return is false.

type SpentnessNotificationsClient

type SpentnessNotificationsClient struct {
	C <-chan *SpentnessNotifications
	// contains filtered or unexported fields
}

SpentnessNotificationsClient receives SpentnessNotifications from the NotificationServer over the channel C.

func (*SpentnessNotificationsClient) Done

func (c *SpentnessNotificationsClient) Done()

Done deregisters the client from the server and drains any remaining messages. It must be called exactly once when the client is finished receiving notifications.

type TransactionNotifications

type TransactionNotifications struct {
	AttachedBlocks           []Block
	DetachedBlocks           []*chainhash.Hash
	UnminedTransactions      []TransactionSummary
	UnminedTransactionHashes []*chainhash.Hash
	NewBalances              []AccountBalance
}

TransactionNotifications is a notification of changes to the wallet's transaction set and the current chain tip that wallet is considered to be synced with. All transactions added to the blockchain are organized by the block they were mined in.

During a chain switch, all removed block hashes are included. Detached blocks are sorted in the reverse order they were mined. Attached blocks are sorted in the order mined.

All newly added unmined transactions are included. Removed unmined transactions are not explicitly included. Instead, the hashes of all transactions still unmined are included.

If any transactions were involved, each affected account's new total balance is included.

TODO: Because this includes stuff about blocks and can be fired without any changes to transactions, it needs a better name.

type TransactionNotificationsClient

type TransactionNotificationsClient struct {
	C <-chan *TransactionNotifications
	// contains filtered or unexported fields
}

TransactionNotificationsClient receives TransactionNotifications from the NotificationServer over the channel C.

func (*TransactionNotificationsClient) Done

Done deregisters the client from the server and drains any remaining messages. It must be called exactly once when the client is finished receiving notifications.

type TransactionOutput

type TransactionOutput struct {
	OutPoint   wire.OutPoint
	Output     wire.TxOut
	OutputKind OutputKind
	// These should be added later when the DB can return them more
	// efficiently:
	//TxLockTime      uint32
	//TxExpiry        uint32
	ContainingBlock BlockIdentity
	ReceiveTime     time.Time
}

TransactionOutput describes an output that was or is at least partially controlled by the wallet. Depending on context, this could refer to an unspent output, or a spent one.

type TransactionSummary

type TransactionSummary struct {
	Hash        *chainhash.Hash
	Transaction []byte
	MyInputs    []TransactionSummaryInput
	MyOutputs   []TransactionSummaryOutput
	Fee         util.Amount
	Timestamp   int64
}

TransactionSummary contains a transaction relevant to the wallet and marks which inputs and outputs were relevant.

type TransactionSummaryInput

type TransactionSummaryInput struct {
	Index           uint32
	PreviousAccount uint32
	PreviousAmount  util.Amount
}

TransactionSummaryInput describes a transaction input that is relevant to the wallet. The Index field marks the transaction input index of the transaction (not included here). The PreviousAccount and PreviousAmount fields describe how much this input debits from a wallet account.

type TransactionSummaryOutput

type TransactionSummaryOutput struct {
	Index    uint32
	Account  uint32
	Internal bool
}

TransactionSummaryOutput describes wallet properties of a transaction output controlled by the wallet. The Index field marks the transaction output index of the transaction (not included here).

type UnstableAPI

type UnstableAPI struct {
	// contains filtered or unexported fields
}

UnstableAPI exports unstable API

func ExposeUnstableAPI

func ExposeUnstableAPI(w *Wallet) UnstableAPI

ExposeUnstableAPI exposes additional unstable public APIs for a Wallet. These APIs may be changed or removed at any time. Currently this type exists to ease the transation (particularly for the legacy JSON-RPC server) from using exported manager packages to a unified wallet package that exposes all functionality by itself. New code should not be written using this API.

func (UnstableAPI) RangeTransactions

func (u UnstableAPI) RangeTransactions(begin, end int32, f func([]wtxmgr.TxDetails) (bool, error)) error

RangeTransactions calls wtxmgr.Store.RangeTransactions under a single database view tranasction.

func (UnstableAPI) TxDetails

func (u UnstableAPI) TxDetails(txHash *chainhash.Hash) (*wtxmgr.TxDetails, error)

TxDetails calls wtxmgr.Store.TxDetails under a single database view transaction.

type Wallet

type Wallet struct {
	Manager *waddrmgr.Manager
	TxStore *wtxmgr.Store

	// Information for reorganization handling.
	// reorganizingLock sync.Mutex
	// reorganizeToHash chainhash.Hash
	// reorganizing     bool
	NtfnServer *NotificationServer
	// contains filtered or unexported fields
}

Wallet is a structure containing all the components for a complete wallet. It contains the Armory-style key store addresses and keys),

func Open

func Open(db walletdb.DB, pubPass []byte, cbs *waddrmgr.OpenCallbacks, params *netparams.Params, recoveryWindow uint32) (*Wallet, error)

Open loads an already-created wallet from the passed database and namespaces.

func (*Wallet) AccountAddresses

func (w *Wallet) AccountAddresses(account uint32) (addrs []util.Address, err error)

AccountAddresses returns the addresses for every created address for an account.

func (*Wallet) AccountBalances

func (w *Wallet) AccountBalances(scope waddrmgr.KeyScope,
	requiredConfs int32) ([]AccountBalanceResult, error)

AccountBalances returns all accounts in the wallet and their balances. Balances are determined by excluding transactions that have not met requiredConfs confirmations.

func (*Wallet) AccountName

func (w *Wallet) AccountName(scope waddrmgr.KeyScope, accountNumber uint32) (string, error)

AccountName returns the name of an account.

func (*Wallet) AccountNumber

func (w *Wallet) AccountNumber(scope waddrmgr.KeyScope, accountName string) (uint32, error)

AccountNumber returns the account number for an account name under a particular key scope.

func (*Wallet) AccountOfAddress

func (w *Wallet) AccountOfAddress(a util.Address) (uint32, error)

AccountOfAddress finds the account that an address is associated with.

func (*Wallet) AccountProperties

func (w *Wallet) AccountProperties(scope waddrmgr.KeyScope, acct uint32) (*waddrmgr.AccountProperties, error)

AccountProperties returns the properties of an account, including address indexes and name. It first fetches the desynced information from the address manager, then updates the indexes based on the address pools.

func (*Wallet) Accounts

func (w *Wallet) Accounts(scope waddrmgr.KeyScope) (*AccountsResult, error)

Accounts returns the current names, numbers, and total balances of all accounts in the wallet restricted to a particular key scope. The current chain tip is included in the result for atomicity reasons.

TODO(jrick): Is the chain tip really needed, since only the total balances are included?

func (*Wallet) AddressInfo

func (w *Wallet) AddressInfo(a util.Address) (waddrmgr.ManagedAddress, error)

AddressInfo returns detailed information regarding a wallet address.

func (*Wallet) CalculateAccountBalances

func (w *Wallet) CalculateAccountBalances(account uint32, confirms int32) (Balances, error)

CalculateAccountBalances sums the amounts of all unspent transaction outputs to the given account of a wallet and returns the balance.

This function is much slower than it needs to be since transactions outputs are not indexed by the accounts they credit to, and all unspent transaction outputs must be iterated.

func (*Wallet) CalculateBalance

func (w *Wallet) CalculateBalance(confirms int32) (util.Amount, error)

CalculateBalance sums the amounts of all unspent transaction outputs to addresses of a wallet and returns the balance.

If confirmations is 0, all UTXOs, even those not present in a block (height -1), will be used to get the balance. Otherwise, a UTXO must be in a block. If confirmations is 1 or greater, the balance will be calculated based on how many how many blocks include a UTXO.

func (*Wallet) ChainClient

func (w *Wallet) ChainClient() chain.Interface

ChainClient returns the optional consensus RPC client associated with the wallet.

This function is unstable and will be removed once sync logic is moved out of the wallet.

func (*Wallet) ChainParams

func (w *Wallet) ChainParams() *netparams.Params

ChainParams returns the network parameters for the blockchain the wallet belongs to.

func (*Wallet) ChainSynced

func (w *Wallet) ChainSynced() bool

ChainSynced returns whether the wallet has been attached to a chain server and synced up to the best block on the main chain.

func (*Wallet) ChangePassphrases

func (w *Wallet) ChangePassphrases(publicOld, publicNew, privateOld,
	privateNew []byte) error

ChangePassphrases modifies the public and private passphrase of the wallet atomically.

func (*Wallet) ChangePrivatePassphrase

func (w *Wallet) ChangePrivatePassphrase(old, new []byte) error

ChangePrivatePassphrase attempts to change the passphrase for a wallet from old to new. Changing the passphrase is synchronized with all other address manager locking and unlocking. The lock state will be the same as it was before the password change.

func (*Wallet) ChangePublicPassphrase

func (w *Wallet) ChangePublicPassphrase(old, new []byte) error

ChangePublicPassphrase modifies the public passphrase of the wallet.

func (*Wallet) CreateSimpleTx

func (w *Wallet) CreateSimpleTx(account uint32, outputs []*wire.TxOut,
	minconf int32, satPerKb util.Amount) (*txauthor.AuthoredTx, error)

CreateSimpleTx creates a new signed transaction spending unspent P2PKH outputs with at laest minconf confirmations spending to any number of address/amount pairs. Change and an appropriate transaction fee are automatically included, if necessary. All transaction creation through this function is serialized to prevent the creation of many transactions which spend the same outputs.

func (*Wallet) CurrentAddress

func (w *Wallet) CurrentAddress(account uint32, scope waddrmgr.KeyScope) (util.Address, error)

CurrentAddress gets the most recently requested Bitcoin payment address from a wallet for a particular key-chain scope. If the address has already been used (there is at least one transaction spending to it in the blockchain or pod mempool), the next chained address is returned.

func (*Wallet) Database

func (w *Wallet) Database() walletdb.DB

Database returns the underlying walletdb database. This method is provided in order to allow applications wrapping btcwallet to store app-specific data with the wallet's database.

func (*Wallet) DumpPrivKeys

func (w *Wallet) DumpPrivKeys() ([]string, error)

DumpPrivKeys returns the WIF-encoded private keys for all addresses with private keys in a wallet.

func (*Wallet) DumpWIFPrivateKey

func (w *Wallet) DumpWIFPrivateKey(addr util.Address) (string, error)

DumpWIFPrivateKey returns the WIF encoded private key for a single wallet address.

func (*Wallet) GetTransactions

func (w *Wallet) GetTransactions(startBlock, endBlock *BlockIdentifier, cancel <-chan struct{}) (*GetTransactionsResult, error)

GetTransactions returns transaction results between a starting and ending block. BlockC in the block range may be specified by either a height or a hash.

Because this is a possibly lenghtly operation, a cancel channel is provided to cancel the task. If this channel unblocks, the results created thus far will be returned.

Transaction results are organized by blocks in ascending order and unmined transactions in an unspecified order. Mined transactions are saved in a Block structure which records properties about the block.

func (*Wallet) HaveAddress

func (w *Wallet) HaveAddress(a util.Address) (bool, error)

HaveAddress returns whether the wallet is the owner of the address a.

func (*Wallet) ImportP2SHRedeemScript

func (w *Wallet) ImportP2SHRedeemScript(script []byte) (*util.AddressScriptHash, error)

ImportP2SHRedeemScript adds a P2SH redeem script to the wallet.

func (*Wallet) ImportPrivateKey

func (w *Wallet) ImportPrivateKey(scope waddrmgr.KeyScope, wif *util.WIF,
	bs *waddrmgr.BlockStamp, rescan bool) (string, error)

ImportPrivateKey imports a private key to the wallet and writes the new wallet to disk.

func (*Wallet) ListAddressTransactions

func (w *Wallet) ListAddressTransactions(pkHashes map[string]struct{}) ([]json.ListTransactionsResult, error)

ListAddressTransactions returns a slice of objects with details about recorded transactions to or from any address belonging to a set. This is intended to be used for listaddresstransactions RPC replies.

func (*Wallet) ListAllTransactions

func (w *Wallet) ListAllTransactions() ([]json.ListTransactionsResult, error)

ListAllTransactions returns a slice of objects with details about a recorded transaction. This is intended to be used for listalltransactions RPC replies.

func (*Wallet) ListSinceBlock

func (w *Wallet) ListSinceBlock(start, end, syncHeight int32) ([]json.ListTransactionsResult, error)

ListSinceBlock returns a slice of objects with details about transactions since the given block. If the block is -1 then all transactions are included. This is intended to be used for listsinceblock RPC replies.

func (*Wallet) ListTransactions

func (w *Wallet) ListTransactions(from, count int) ([]json.ListTransactionsResult, error)

ListTransactions returns a slice of objects with details about a recorded transaction. This is intended to be used for listtransactions RPC replies.

func (*Wallet) ListUnspent

func (w *Wallet) ListUnspent(minconf, maxconf int32,
	addresses map[string]struct{}) ([]*json.ListUnspentResult, error)

ListUnspent returns a slice of objects representing the unspent wallet transactions fitting the given criteria. The confirmations will be more than minconf, less than maxconf and if addresses is populated only the addresses contained within it will be considered. If we know nothing about a transaction an empty array will be returned.

func (*Wallet) Lock

func (w *Wallet) Lock()

Lock locks the wallet's address manager.

func (*Wallet) LockOutpoint

func (w *Wallet) LockOutpoint(op wire.OutPoint)

LockOutpoint marks an outpoint as locked, that is, it should not be used as an input for newly created transactions.

func (*Wallet) Locked

func (w *Wallet) Locked() bool

Locked returns whether the account manager for a wallet is locked.

func (*Wallet) LockedOutpoint

func (w *Wallet) LockedOutpoint(op wire.OutPoint) bool

LockedOutpoint returns whether an outpoint has been marked as locked and should not be used as an input for created transactions.

func (*Wallet) LockedOutpoints

func (w *Wallet) LockedOutpoints() []json.TransactionInput

LockedOutpoints returns a slice of currently locked outpoints. This is intended to be used by marshaling the result as a JSON array for listlockunspent RPC results.

func (*Wallet) MakeMultiSigScript

func (w *Wallet) MakeMultiSigScript(addrs []util.Address, nRequired int) ([]byte, error)

MakeMultiSigScript creates a multi-signature script that can be redeemed with nRequired signatures of the passed keys and addresses. If the address is a P2PKH address, the associated pubkey is looked up by the wallet if possible, otherwise an error is returned for a missing pubkey.

This function only works with pubkeys and P2PKH addresses derived from them.

func (*Wallet) NewAddress

func (w *Wallet) NewAddress(account uint32,
	scope waddrmgr.KeyScope) (util.Address, error)

NewAddress returns the next external chained address for a wallet.

func (*Wallet) NewChangeAddress

func (w *Wallet) NewChangeAddress(account uint32,
	scope waddrmgr.KeyScope) (util.Address, error)

NewChangeAddress returns a new change address for a wallet.

func (*Wallet) NextAccount

func (w *Wallet) NextAccount(scope waddrmgr.KeyScope, name string) (uint32, error)

NextAccount creates the next account and returns its account number. The name must be unique to the account. In order to support automatic seed restoring, new accounts may not be created when all of the previous 100 accounts have no transaction history (this is a deviation from the BIP0044 spec, which allows no unused account gaps).

func (*Wallet) PrivKeyForAddress

func (w *Wallet) PrivKeyForAddress(a util.Address) (*ec.PrivateKey, error)

PrivKeyForAddress looks up the associated private key for a P2PKH or P2PK address.

func (*Wallet) PubKeyForAddress

func (w *Wallet) PubKeyForAddress(a util.Address) (*ec.PublicKey, error)

PubKeyForAddress looks up the associated public key for a P2PKH address.

func (*Wallet) PublishTransaction

func (w *Wallet) PublishTransaction(tx *wire.MsgTx) error

PublishTransaction sends the transaction to the consensus RPC server so it can be propagated to other nodes and eventually mined.

This function is unstable and will be removed once syncing code is moved out of the wallet.

func (*Wallet) RenameAccount

func (w *Wallet) RenameAccount(scope waddrmgr.KeyScope, account uint32, newName string) error

RenameAccount sets the name for an account number to newName.

func (*Wallet) Rescan

func (w *Wallet) Rescan(addrs []util.Address, unspent []wtxmgr.Credit) error

Rescan begins a rescan for all active addresses and unspent outputs of a wallet. This is intended to be used to sync a wallet back up to the current best block in the main chain, and is considered an initial sync rescan.

func (*Wallet) ResetLockedOutpoints

func (w *Wallet) ResetLockedOutpoints()

ResetLockedOutpoints resets the set of locked outpoints so all may be used as inputs for new transactions.

func (*Wallet) SendOutputs

func (w *Wallet) SendOutputs(outputs []*wire.TxOut, account uint32,
	minconf int32, satPerKb util.Amount) (*chainhash.Hash, error)

SendOutputs creates and sends payment transactions. It returns the transaction hash upon success.

func (*Wallet) SetChainSynced

func (w *Wallet) SetChainSynced(synced bool)

SetChainSynced marks whether the wallet is connected to and currently in sync with the latest block notified by the chain server.

NOTE: Due to an API limitation with rpcclient, this may return true after the client disconnected (and is attempting a reconnect). This will be unknown until the reconnect notification is received, at which point the wallet can be marked out of sync again until after the next rescan completes.

func (*Wallet) ShuttingDown

func (w *Wallet) ShuttingDown() bool

ShuttingDown returns whether the wallet is currently in the process of shutting down or not.

func (*Wallet) SignTransaction

func (w *Wallet) SignTransaction(tx *wire.MsgTx, hashType txscript.SigHashType,
	additionalPrevScripts map[wire.OutPoint][]byte,
	additionalKeysByAddress map[string]*util.WIF,
	p2shRedeemScriptsByAddress map[string][]byte) ([]SignatureError, error)

SignTransaction uses secrets of the wallet, as well as additional secrets passed in by the caller, to create and add input signatures to a transaction.

Transaction input script validation is used to confirm that all signatures are valid. For any invalid input, a SignatureError is added to the returns. The final error return is reserved for unexpected or fatal errors, such as being unable to determine a previous output script to redeem.

The transaction pointed to by tx is modified by this function.

func (*Wallet) SortedActivePaymentAddresses

func (w *Wallet) SortedActivePaymentAddresses() ([]string, error)

SortedActivePaymentAddresses returns a slice of all active payment addresses in a wallet.

func (*Wallet) Start

func (w *Wallet) Start()

Start starts the goroutines necessary to manage a wallet.

func (*Wallet) Stop

func (w *Wallet) Stop()

Stop signals all wallet goroutines to shutdown.

func (*Wallet) SubmitRescan

func (w *Wallet) SubmitRescan(job *RescanJob) <-chan error

SubmitRescan submits a RescanJob to the RescanManager. A channel is returned with the final error of the rescan. The channel is buffered and does not need to be read to prevent a deadlock. (ed: until the buffer is filled ;)

func (*Wallet) SynchronizeRPC

func (w *Wallet) SynchronizeRPC(chainClient chain.Interface)

SynchronizeRPC associates the wallet with the consensus RPC client, synchronizes the wallet with the latest changes to the blockchain, and continuously updates the wallet through RPC notifications.

This method is unstable and will be removed when all syncing logic is moved outside of the wallet package.

func (*Wallet) SynchronizingToNetwork

func (w *Wallet) SynchronizingToNetwork() bool

SynchronizingToNetwork returns whether the wallet is currently synchronizing with the Bitcoin network.

func (*Wallet) TotalReceivedForAccounts

func (w *Wallet) TotalReceivedForAccounts(scope waddrmgr.KeyScope,
	minConf int32) ([]AccountTotalReceivedResult, error)

TotalReceivedForAccounts iterates through a wallet's transaction history, returning the total amount of Bitcoin received for all accounts.

func (*Wallet) TotalReceivedForAddr

func (w *Wallet) TotalReceivedForAddr(addr util.Address, minConf int32) (util.Amount, error)

TotalReceivedForAddr iterates through a wallet's transaction history, returning the total amount of bitcoins received for a single wallet address.

func (*Wallet) Unlock

func (w *Wallet) Unlock(passphrase []byte, lock <-chan time.Time) error

Unlock unlocks the wallet's address manager and relocks it after timeout has expired. If the wallet is already unlocked and the new passphrase is correct, the current timeout is replaced with the new one. The wallet will be locked if the passphrase is incorrect or any other error occurs during the unlock.

func (*Wallet) UnlockOutpoint

func (w *Wallet) UnlockOutpoint(op wire.OutPoint)

UnlockOutpoint marks an outpoint as unlocked, that is, it may be used as an input for newly created transactions.

func (*Wallet) UnspentOutputs

func (w *Wallet) UnspentOutputs(policy OutputSelectionPolicy) ([]*TransactionOutput, error)

UnspentOutputs fetches all unspent outputs from the wallet that match rules described in the passed policy.

func (*Wallet) WaitForShutdown

func (w *Wallet) WaitForShutdown()

WaitForShutdown blocks until all wallet goroutines have finished executing.

Directories

Path Synopsis
Package txauthor provides transaction creation code for wallets.
Package txauthor provides transaction creation code for wallets.
Package wtxmgr provides an implementation of a transaction database handling spend tracking for a bitcoin wallet.
Package wtxmgr provides an implementation of a transaction database handling spend tracking for a bitcoin wallet.
Package txrules provides transaction rules that should be followed by transaction authors for wide mempool acceptance and quick mining.
Package txrules provides transaction rules that should be followed by transaction authors for wide mempool acceptance and quick mining.
Package txscript implements the bitcoin transaction script language.
Package txscript implements the bitcoin transaction script language.
Package txsort provides the transaction sorting according to BIP 69.
Package txsort provides the transaction sorting according to BIP 69.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL