core

package
v1.8.6 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Apr 23, 2018 License: GPL-3.0 Imports: 37 Imported by: 0

Documentation

Overview

Package core implements the Ethereum consensus protocol.

Index

Examples

Constants

View Source
const (

	// BlockChainVersion ensures that an incompatible database forces a resync from scratch.
	BlockChainVersion = 3
)

Variables

View Source
var (

	// Chain index prefixes (use `i` + single byte to avoid mixing data types).
	BloomBitsIndexPrefix = []byte("iB") // BloomBitsIndexPrefix is the data table of a chain indexer to track its progress

	ErrChainConfigNotFound = errors.New("ChainConfig not found") // general config not found error

)
View Source
var (
	// ErrKnownBlock is returned when a block to import is already known locally.
	ErrKnownBlock = errors.New("block already known")

	// ErrGasLimitReached is returned by the gas pool if the amount of gas required
	// by a transaction is higher than what's left in the block.
	ErrGasLimitReached = errors.New("gas limit reached")

	// ErrBlacklistedHash is returned if a block to import is on the blacklist.
	ErrBlacklistedHash = errors.New("blacklisted hash")

	// ErrNonceTooHigh is returned if the nonce of a transaction is higher than the
	// next one expected based on the local chain.
	ErrNonceTooHigh = errors.New("nonce too high")
)
View Source
var (
	// ErrInvalidSender is returned if the transaction contains an invalid signature.
	ErrInvalidSender = errors.New("invalid sender")

	// ErrNonceTooLow is returned if the nonce of a transaction is lower than the
	// one present in the local chain.
	ErrNonceTooLow = errors.New("nonce too low")

	// ErrUnderpriced is returned if a transaction's gas price is below the minimum
	// configured for the transaction pool.
	ErrUnderpriced = errors.New("transaction underpriced")

	// ErrReplaceUnderpriced is returned if a transaction is attempted to be replaced
	// with a different one without the required price bump.
	ErrReplaceUnderpriced = errors.New("replacement transaction underpriced")

	// ErrInsufficientFunds is returned if the total cost of executing a transaction
	// is higher than the balance of the user's account.
	ErrInsufficientFunds = errors.New("insufficient funds for gas * price + value")

	// ErrIntrinsicGas is returned if the transaction is specified to use less gas
	// than required to start the invocation.
	ErrIntrinsicGas = errors.New("intrinsic gas too low")

	// ErrGasLimit is returned if a transaction's requested gas limit exceeds the
	// maximum allowance of the current block.
	ErrGasLimit = errors.New("exceeds block gas limit")

	// ErrNegativeValue is a sanity error to ensure noone is able to specify a
	// transaction with a negative value.
	ErrNegativeValue = errors.New("negative value")

	// ErrOversizedData is returned if the input data of a transaction is greater
	// than some meaningful limit a user might use. This is not a consensus error
	// making the transaction invalid, rather a DOS protection.
	ErrOversizedData = errors.New("oversized data")
)
View Source
var BadHashes = map[common.Hash]bool{
	common.HexToHash("05bef30ef572270f654746da22639a7a0c97dd97a7050b9e252391996aaeb689"): true,
	common.HexToHash("7d05d08cbc596a2e5e4f13b80a743e53e09221b5323c3a61946b20873e58583f"): true,
}

BadHashes represent a set of manually tracked bad hashes (usually hard forks)

View Source
var DefaultTxPoolConfig = TxPoolConfig{
	Journal:   "transactions.rlp",
	Rejournal: time.Hour,

	PriceLimit: 1,
	PriceBump:  10,

	AccountSlots: 16,
	GlobalSlots:  4096,
	AccountQueue: 64,
	GlobalQueue:  1024,

	Lifetime: 3 * time.Hour,
}

DefaultTxPoolConfig contains the default configurations for the transaction pool.

View Source
var (
	ErrNoGenesis = errors.New("Genesis not found in chain")
)

Functions

func ApplyMessage added in v0.9.17

func ApplyMessage(evm *vm.EVM, msg Message, gp *GasPool) ([]byte, uint64, bool, error)

ApplyMessage computes the new state by applying the given message against the old state within the environment.

ApplyMessage returns the bytes returned by any EVM execution (if it took place), the gas used (which includes gas refunds) and an error if it failed. An error always indicates a core error meaning that the message would always fail for that particular state and would never be accepted within a block.

func ApplyTransaction added in v1.3.2

func ApplyTransaction(config *params.ChainConfig, bc *BlockChain, author *common.Address, gp *GasPool, statedb *state.StateDB, header *types.Header, tx *types.Transaction, usedGas *uint64, cfg vm.Config) (*types.Receipt, uint64, error)

ApplyTransaction attempts to apply a transaction to the given state database and uses the input parameters for its environment. It returns the receipt for the transaction, gas used and an error if the transaction failed, indicating the block was invalid.

func CalcGasLimit added in v0.8.4

func CalcGasLimit(parent *types.Block) uint64

CalcGasLimit computes the gas limit of the next block after parent. This is miner strategy, not consensus protocol.

func CanTransfer added in v1.5.5

func CanTransfer(db vm.StateDB, addr common.Address, amount *big.Int) bool

CanTransfer checks wether there are enough funds in the address' account to make a transfer. This does not take the necessary gas in to account to make the transfer valid.

func DeleteBlock added in v1.2.2

func DeleteBlock(db DatabaseDeleter, hash common.Hash, number uint64)

DeleteBlock removes all block data associated with a hash.

func DeleteBlockReceipts added in v1.3.2

func DeleteBlockReceipts(db DatabaseDeleter, hash common.Hash, number uint64)

DeleteBlockReceipts removes all receipt data associated with a block hash.

func DeleteBody added in v1.2.2

func DeleteBody(db DatabaseDeleter, hash common.Hash, number uint64)

DeleteBody removes all block body data associated with a hash.

func DeleteCanonicalHash added in v1.2.2

func DeleteCanonicalHash(db DatabaseDeleter, number uint64)

DeleteCanonicalHash removes the number to hash canonical mapping.

func DeleteHeader added in v1.2.2

func DeleteHeader(db DatabaseDeleter, hash common.Hash, number uint64)

DeleteHeader removes all block header data associated with a hash.

func DeleteTd added in v1.2.2

func DeleteTd(db DatabaseDeleter, hash common.Hash, number uint64)

DeleteTd removes all block total difficulty data associated with a hash.

func DeleteTxLookupEntry added in v1.7.0

func DeleteTxLookupEntry(db DatabaseDeleter, hash common.Hash)

DeleteTxLookupEntry removes all transaction data associated with a hash.

func FindCommonAncestor added in v1.5.0

func FindCommonAncestor(db DatabaseReader, a, b *types.Header) *types.Header

FindCommonAncestor returns the last common ancestor of two block headers

func GenerateChain added in v0.9.34

func GenerateChain(config *params.ChainConfig, parent *types.Block, engine consensus.Engine, db ethdb.Database, n int, gen func(int, *BlockGen)) ([]*types.Block, []types.Receipts)

GenerateChain creates a chain of n blocks. The first block's parent will be the provided parent. db is used to store intermediate states and should contain the parent's state trie.

The generator function is called with a new block generator for every block. Any transactions and uncles added to the generator become part of the block. If gen is nil, the blocks will be empty and their coinbase will be the zero address.

Blocks created by GenerateChain do not contain valid proof of work values. Inserting them into BlockChain requires use of FakePow or a similar non-validating proof of work implementation.

Example
var (
	key1, _ = crypto.HexToECDSA("b71c71a67e1177ad4e901695e1b4b9ee17ae16c6668d313eac2f96dbcda3f291")
	key2, _ = crypto.HexToECDSA("8a1f9a8f95be41cd7ccb6168179afb4504aefe388d1e14474d32c45c72ce7b7a")
	key3, _ = crypto.HexToECDSA("49a7b37aa6f6645917e7b807e9d1c00d4fa71f18343b0d4122a4d2df64dd6fee")
	addr1   = crypto.PubkeyToAddress(key1.PublicKey)
	addr2   = crypto.PubkeyToAddress(key2.PublicKey)
	addr3   = crypto.PubkeyToAddress(key3.PublicKey)
	db, _   = ethdb.NewMemDatabase()
)

// Ensure that key1 has some funds in the genesis block.
gspec := &Genesis{
	Config: &params.ChainConfig{HomesteadBlock: new(big.Int)},
	Alloc:  GenesisAlloc{addr1: {Balance: big.NewInt(1000000)}},
}
genesis := gspec.MustCommit(db)

// This call generates a chain of 5 blocks. The function runs for
// each block and adds different features to gen based on the
// block index.
signer := types.HomesteadSigner{}
chain, _ := GenerateChain(gspec.Config, genesis, ethash.NewFaker(), db, 5, func(i int, gen *BlockGen) {
	switch i {
	case 0:
		// In block 1, addr1 sends addr2 some ether.
		tx, _ := types.SignTx(types.NewTransaction(gen.TxNonce(addr1), addr2, big.NewInt(10000), params.TxGas, nil, nil), signer, key1)
		gen.AddTx(tx)
	case 1:
		// In block 2, addr1 sends some more ether to addr2.
		// addr2 passes it on to addr3.
		tx1, _ := types.SignTx(types.NewTransaction(gen.TxNonce(addr1), addr2, big.NewInt(1000), params.TxGas, nil, nil), signer, key1)
		tx2, _ := types.SignTx(types.NewTransaction(gen.TxNonce(addr2), addr3, big.NewInt(1000), params.TxGas, nil, nil), signer, key2)
		gen.AddTx(tx1)
		gen.AddTx(tx2)
	case 2:
		// Block 3 is empty but was mined by addr3.
		gen.SetCoinbase(addr3)
		gen.SetExtra([]byte("yeehaw"))
	case 3:
		// Block 4 includes blocks 2 and 3 as uncle headers (with modified extra data).
		b2 := gen.PrevBlock(1).Header()
		b2.Extra = []byte("foo")
		gen.AddUncle(b2)
		b3 := gen.PrevBlock(2).Header()
		b3.Extra = []byte("foo")
		gen.AddUncle(b3)
	}
})

// Import the chain. This runs all block validation rules.
blockchain, _ := NewBlockChain(db, nil, gspec.Config, ethash.NewFaker(), vm.Config{})
defer blockchain.Stop()

if i, err := blockchain.InsertChain(chain); err != nil {
	fmt.Printf("insert error (block %d): %v\n", chain[i].NumberU64(), err)
	return
}

state, _ := blockchain.State()
fmt.Printf("last block: #%d\n", blockchain.CurrentBlock().Number())
fmt.Println("balance of addr1:", state.GetBalance(addr1))
fmt.Println("balance of addr2:", state.GetBalance(addr2))
fmt.Println("balance of addr3:", state.GetBalance(addr3))
Output:

last block: #5
balance of addr1: 989000
balance of addr2: 10000
balance of addr3: 19687500000000001000

func GenesisBlockForTesting added in v0.9.34

func GenesisBlockForTesting(db ethdb.Database, addr common.Address, balance *big.Int) *types.Block

GenesisBlockForTesting creates and writes a block in which addr has the given wei balance.

func GetBlock added in v1.2.2

func GetBlock(db DatabaseReader, hash common.Hash, number uint64) *types.Block

GetBlock retrieves an entire block corresponding to the hash, assembling it back from the stored header and body. If either the header or body could not be retrieved nil is returned.

Note, due to concurrent download of header and block body the header and thus canonical hash can be stored in the database but the body data not (yet).

func GetBlockChainVersion added in v1.4.0

func GetBlockChainVersion(db DatabaseReader) int

GetBlockChainVersion reads the version number from db.

func GetBlockNumber added in v1.5.0

func GetBlockNumber(db DatabaseReader, hash common.Hash) uint64

GetBlockNumber returns the block number assigned to a block hash if the corresponding header is present in the database

func GetBlockReceipts added in v0.9.39

func GetBlockReceipts(db DatabaseReader, hash common.Hash, number uint64) types.Receipts

GetBlockReceipts retrieves the receipts generated by the transactions included in a block given by its hash.

func GetBloomBits added in v1.7.0

func GetBloomBits(db DatabaseReader, bit uint, section uint64, head common.Hash) ([]byte, error)

GetBloomBits retrieves the compressed bloom bit vector belonging to the given section and bit index from the.

func GetBody added in v1.2.2

func GetBody(db DatabaseReader, hash common.Hash, number uint64) *types.Body

GetBody retrieves the block body (transactons, uncles) corresponding to the hash, nil if none found.

func GetBodyRLP added in v1.2.2

func GetBodyRLP(db DatabaseReader, hash common.Hash, number uint64) rlp.RawValue

GetBodyRLP retrieves the block body (transactions and uncles) in RLP encoding.

func GetCanonicalHash added in v1.2.2

func GetCanonicalHash(db DatabaseReader, number uint64) common.Hash

GetCanonicalHash retrieves a hash assigned to a canonical block number.

func GetChainConfig added in v1.4.0

func GetChainConfig(db DatabaseReader, hash common.Hash) (*params.ChainConfig, error)

GetChainConfig will fetch the network settings based on the given hash.

func GetHashFn added in v1.4.0

func GetHashFn(ref *types.Header, chain ChainContext) func(n uint64) common.Hash

GetHashFn returns a GetHashFunc which retrieves header hashes by number

func GetHeadBlockHash added in v1.2.2

func GetHeadBlockHash(db DatabaseReader) common.Hash

GetHeadBlockHash retrieves the hash of the current canonical head block.

func GetHeadFastBlockHash added in v1.3.1

func GetHeadFastBlockHash(db DatabaseReader) common.Hash

GetHeadFastBlockHash retrieves the hash of the current canonical head block during fast synchronization. The difference between this and GetHeadBlockHash is that whereas the last block hash is only updated upon a full block import, the last fast hash is updated when importing pre-processed blocks.

func GetHeadHeaderHash added in v1.2.2

func GetHeadHeaderHash(db DatabaseReader) common.Hash

GetHeadHeaderHash retrieves the hash of the current canonical head block's header. The difference between this and GetHeadBlockHash is that whereas the last block hash is only updated upon a full block import, the last header hash is updated already at header import, allowing head tracking for the light synchronization mechanism.

func GetHeader added in v1.2.2

func GetHeader(db DatabaseReader, hash common.Hash, number uint64) *types.Header

GetHeader retrieves the block header corresponding to the hash, nil if none found.

func GetHeaderRLP added in v1.2.2

func GetHeaderRLP(db DatabaseReader, hash common.Hash, number uint64) rlp.RawValue

GetHeaderRLP retrieves a block header in its raw RLP database encoding, or nil if the header's not found.

func GetReceipt added in v0.9.36

func GetReceipt(db DatabaseReader, hash common.Hash) (*types.Receipt, common.Hash, uint64, uint64)

GetReceipt retrieves a specific transaction receipt from the database, along with its added positional metadata.

func GetTd added in v1.2.2

func GetTd(db DatabaseReader, hash common.Hash, number uint64) *big.Int

GetTd retrieves a block's total difficulty corresponding to the hash, nil if none found.

func GetTransaction added in v1.2.2

func GetTransaction(db DatabaseReader, hash common.Hash) (*types.Transaction, common.Hash, uint64, uint64)

GetTransaction retrieves a specific transaction from the database, along with its added positional metadata.

func GetTrieSyncProgress added in v1.8.2

func GetTrieSyncProgress(db DatabaseReader) uint64

GetTrieSyncProgress retrieves the number of tries nodes fast synced to allow reportinc correct numbers across restarts.

func GetTxLookupEntry added in v1.7.0

func GetTxLookupEntry(db DatabaseReader, hash common.Hash) (common.Hash, uint64, uint64)

GetTxLookupEntry retrieves the positional metadata associated with a transaction hash to allow retrieving the transaction or receipt by hash.

func IntrinsicGas added in v0.9.17

func IntrinsicGas(data []byte, contractCreation, homestead bool) (uint64, error)

IntrinsicGas computes the 'intrinsic gas' for a message with the given data.

func NewEVMContext added in v1.5.5

func NewEVMContext(msg Message, header *types.Header, chain ChainContext, author *common.Address) vm.Context

NewEVMContext creates a new context for use in the EVM.

func PreimageTable added in v1.5.8

func PreimageTable(db ethdb.Database) ethdb.Database

PreimageTable returns a Database instance with the key prefix for preimage entries.

func SetReceiptsData added in v1.5.0

func SetReceiptsData(config *params.ChainConfig, block *types.Block, receipts types.Receipts) error

SetReceiptsData computes all the non-consensus fields of the receipts

func SetupGenesisBlock added in v1.6.0

func SetupGenesisBlock(db ethdb.Database, genesis *Genesis) (*params.ChainConfig, common.Hash, error)

SetupGenesisBlock writes or updates the genesis block in db. The block that will be used is:

                     genesis == nil       genesis != nil
                  +------------------------------------------
db has no genesis |  main-net default  |  genesis
db has genesis    |  from DB           |  genesis (if compatible)

The stored chain configuration will be updated if it is compatible (i.e. does not specify a fork block below the local head block). In case of a conflict, the error is a *params.ConfigCompatError and the new, unwritten config is returned.

The returned chain configuration is never nil.

func Transfer added in v1.3.1

func Transfer(db vm.StateDB, sender, recipient common.Address, amount *big.Int)

Transfer subtracts amount from sender and adds amount to recipient using the given Db

func WriteBlock added in v0.9.39

func WriteBlock(db ethdb.Putter, block *types.Block) error

WriteBlock serializes a block into the database, header and body separately.

func WriteBlockChainVersion added in v1.4.0

func WriteBlockChainVersion(db ethdb.Putter, vsn int)

WriteBlockChainVersion writes vsn as the version number to db.

func WriteBlockReceipts added in v1.3.2

func WriteBlockReceipts(db ethdb.Putter, hash common.Hash, number uint64, receipts types.Receipts) error

WriteBlockReceipts stores all the transaction receipts belonging to a block as a single receipt slice. This is used during chain reorganisations for rescheduling dropped transactions.

func WriteBloomBits added in v1.7.0

func WriteBloomBits(db ethdb.Putter, bit uint, section uint64, head common.Hash, bits []byte)

WriteBloomBits writes the compressed bloom bits vector belonging to the given section and bit index.

func WriteBody added in v1.2.2

func WriteBody(db ethdb.Putter, hash common.Hash, number uint64, body *types.Body) error

WriteBody serializes the body of a block into the database.

func WriteBodyRLP added in v1.5.0

func WriteBodyRLP(db ethdb.Putter, hash common.Hash, number uint64, rlp rlp.RawValue) error

WriteBodyRLP writes a serialized body of a block into the database.

func WriteCanonicalHash added in v1.2.2

func WriteCanonicalHash(db ethdb.Putter, hash common.Hash, number uint64) error

WriteCanonicalHash stores the canonical hash for the given block number.

func WriteChainConfig added in v1.4.0

func WriteChainConfig(db ethdb.Putter, hash common.Hash, cfg *params.ChainConfig) error

WriteChainConfig writes the chain config settings to the database.

func WriteHeadBlockHash added in v1.2.2

func WriteHeadBlockHash(db ethdb.Putter, hash common.Hash) error

WriteHeadBlockHash stores the head block's hash.

func WriteHeadFastBlockHash added in v1.3.1

func WriteHeadFastBlockHash(db ethdb.Putter, hash common.Hash) error

WriteHeadFastBlockHash stores the fast head block's hash.

func WriteHeadHeaderHash added in v1.2.2

func WriteHeadHeaderHash(db ethdb.Putter, hash common.Hash) error

WriteHeadHeaderHash stores the head header's hash.

func WriteHeader added in v1.2.2

func WriteHeader(db ethdb.Putter, header *types.Header) error

WriteHeader serializes a block header into the database.

func WritePreimages added in v1.5.8

func WritePreimages(db ethdb.Database, number uint64, preimages map[common.Hash][]byte) error

WritePreimages writes the provided set of preimages to the database. `number` is the current block number, and is used for debug messages only.

func WriteTd added in v1.2.2

func WriteTd(db ethdb.Putter, hash common.Hash, number uint64, td *big.Int) error

WriteTd serializes the total difficulty of a block into the database.

func WriteTrieSyncProgress added in v1.8.2

func WriteTrieSyncProgress(db ethdb.Putter, count uint64) error

WriteTrieSyncProgress stores the fast sync trie process counter to support retrieving it across restarts.

func WriteTxLookupEntries added in v1.7.0

func WriteTxLookupEntries(db ethdb.Putter, block *types.Block) error

WriteTxLookupEntries stores a positional metadata for every transaction from a block, enabling hash based transaction and receipt lookups.

Types

type BadBlockArgs added in v1.6.0

type BadBlockArgs struct {
	Hash   common.Hash   `json:"hash"`
	Header *types.Header `json:"header"`
}

BadBlockArgs represents the entries in the list returned when bad blocks are queried.

type BlockChain added in v1.3.1

type BlockChain struct {
	// contains filtered or unexported fields
}

BlockChain represents the canonical chain given a database with a genesis block. The Blockchain manages chain imports, reverts, chain reorganisations.

Importing blocks in to the block chain happens according to the set of rules defined by the two stage Validator. Processing of blocks is done using the Processor which processes the included transaction. The validation of the state is done in the second part of the Validator. Failing results in aborting of the import.

The BlockChain also helps in returning blocks from **any** chain included in the database as well as blocks that represents the canonical chain. It's important to note that GetBlock can return any block and does not need to be included in the canonical one where as GetBlockByNumber always represents the canonical chain.

func NewBlockChain added in v1.3.1

func NewBlockChain(db ethdb.Database, cacheConfig *CacheConfig, chainConfig *params.ChainConfig, engine consensus.Engine, vmConfig vm.Config) (*BlockChain, error)

NewBlockChain returns a fully initialised block chain using information available in the database. It initialises the default Ethereum Validator and Processor.

func (*BlockChain) BadBlocks added in v1.6.0

func (bc *BlockChain) BadBlocks() ([]BadBlockArgs, error)

BadBlocks returns a list of the last 'bad blocks' that the client has seen on the network

func (*BlockChain) Config added in v1.4.1

func (bc *BlockChain) Config() *params.ChainConfig

Config retrieves the blockchain's chain configuration.

func (*BlockChain) CurrentBlock added in v1.3.1

func (bc *BlockChain) CurrentBlock() *types.Block

CurrentBlock retrieves the current head block of the canonical chain. The block is retrieved from the blockchain's internal cache.

func (*BlockChain) CurrentFastBlock added in v1.3.1

func (bc *BlockChain) CurrentFastBlock() *types.Block

CurrentFastBlock retrieves the current fast-sync head block of the canonical chain. The block is retrieved from the blockchain's internal cache.

func (*BlockChain) CurrentHeader added in v1.3.1

func (bc *BlockChain) CurrentHeader() *types.Header

CurrentHeader retrieves the current head header of the canonical chain. The header is retrieved from the HeaderChain's internal cache.

func (*BlockChain) Engine added in v1.6.0

func (bc *BlockChain) Engine() consensus.Engine

Engine retrieves the blockchain's consensus engine.

func (*BlockChain) Export added in v1.3.1

func (bc *BlockChain) Export(w io.Writer) error

Export writes the active chain to the given writer.

func (*BlockChain) ExportN added in v1.3.1

func (bc *BlockChain) ExportN(w io.Writer, first uint64, last uint64) error

ExportN writes a subset of the active chain to the given writer.

func (*BlockChain) FastSyncCommitHead added in v1.3.1

func (bc *BlockChain) FastSyncCommitHead(hash common.Hash) error

FastSyncCommitHead sets the current head block to the one defined by the hash irrelevant what the chain contents were prior.

func (*BlockChain) GasLimit added in v1.3.1

func (bc *BlockChain) GasLimit() uint64

GasLimit returns the gas limit of the current HEAD block.

func (*BlockChain) Genesis added in v1.3.1

func (bc *BlockChain) Genesis() *types.Block

Genesis retrieves the chain's genesis block.

func (*BlockChain) GetBlock added in v1.3.1

func (bc *BlockChain) GetBlock(hash common.Hash, number uint64) *types.Block

GetBlock retrieves a block from the database by hash and number, caching it if found.

func (*BlockChain) GetBlockByHash added in v1.5.0

func (bc *BlockChain) GetBlockByHash(hash common.Hash) *types.Block

GetBlockByHash retrieves a block from the database by hash, caching it if found.

func (*BlockChain) GetBlockByNumber added in v1.3.1

func (bc *BlockChain) GetBlockByNumber(number uint64) *types.Block

GetBlockByNumber retrieves a block from the database by number, caching it (associated with its hash) if found.

func (*BlockChain) GetBlockHashesFromHash added in v1.3.1

func (bc *BlockChain) GetBlockHashesFromHash(hash common.Hash, max uint64) []common.Hash

GetBlockHashesFromHash retrieves a number of block hashes starting at a given hash, fetching towards the genesis block.

func (*BlockChain) GetBlocksFromHash added in v1.3.1

func (bc *BlockChain) GetBlocksFromHash(hash common.Hash, n int) (blocks []*types.Block)

GetBlocksFromHash returns the block corresponding to hash and up to n-1 ancestors. [deprecated by eth/62]

func (*BlockChain) GetBody added in v1.3.1

func (bc *BlockChain) GetBody(hash common.Hash) *types.Body

GetBody retrieves a block body (transactions and uncles) from the database by hash, caching it if found.

func (*BlockChain) GetBodyRLP added in v1.3.1

func (bc *BlockChain) GetBodyRLP(hash common.Hash) rlp.RawValue

GetBodyRLP retrieves a block body in RLP encoding from the database by hash, caching it if found.

func (*BlockChain) GetHeader added in v1.3.1

func (bc *BlockChain) GetHeader(hash common.Hash, number uint64) *types.Header

GetHeader retrieves a block header from the database by hash and number, caching it if found.

func (*BlockChain) GetHeaderByHash added in v1.5.0

func (bc *BlockChain) GetHeaderByHash(hash common.Hash) *types.Header

GetHeaderByHash retrieves a block header from the database by hash, caching it if found.

func (*BlockChain) GetHeaderByNumber added in v1.3.1

func (bc *BlockChain) GetHeaderByNumber(number uint64) *types.Header

GetHeaderByNumber retrieves a block header from the database by number, caching it (associated with its hash) if found.

func (*BlockChain) GetReceiptsByHash added in v1.8.0

func (bc *BlockChain) GetReceiptsByHash(hash common.Hash) types.Receipts

GetReceiptsByHash retrieves the receipts for all transactions in a given block.

func (*BlockChain) GetTd added in v1.3.1

func (bc *BlockChain) GetTd(hash common.Hash, number uint64) *big.Int

GetTd retrieves a block's total difficulty in the canonical chain from the database by hash and number, caching it if found.

func (*BlockChain) GetTdByHash added in v1.5.0

func (bc *BlockChain) GetTdByHash(hash common.Hash) *big.Int

GetTdByHash retrieves a block's total difficulty in the canonical chain from the database by hash, caching it if found.

func (*BlockChain) GetUnclesInChain added in v1.3.1

func (bc *BlockChain) GetUnclesInChain(block *types.Block, length int) []*types.Header

GetUnclesInChain retrieves all the uncles from a given block backwards until a specific distance is reached.

func (*BlockChain) HasBlock added in v1.3.1

func (bc *BlockChain) HasBlock(hash common.Hash, number uint64) bool

HasBlock checks if a block is fully present in the database or not.

func (*BlockChain) HasBlockAndState added in v1.3.3

func (bc *BlockChain) HasBlockAndState(hash common.Hash, number uint64) bool

HasBlockAndState checks if a block and associated state trie is fully present in the database or not, caching it if present.

func (*BlockChain) HasHeader added in v1.3.1

func (bc *BlockChain) HasHeader(hash common.Hash, number uint64) bool

HasHeader checks if a block header is present in the database or not, caching it if present.

func (*BlockChain) HasState added in v1.8.0

func (bc *BlockChain) HasState(hash common.Hash) bool

HasState checks if state trie is fully present in the database or not.

func (*BlockChain) InsertChain added in v1.3.1

func (bc *BlockChain) InsertChain(chain types.Blocks) (int, error)

InsertChain attempts to insert the given batch of blocks in to the canonical chain or, otherwise, create a fork. If an error is returned it will return the index number of the failing block as well an error describing what went wrong.

After insertion is done, all accumulated events will be fired.

func (*BlockChain) InsertHeaderChain added in v1.3.1

func (bc *BlockChain) InsertHeaderChain(chain []*types.Header, checkFreq int) (int, error)

InsertHeaderChain attempts to insert the given header chain in to the local chain, possibly creating a reorg. If an error is returned, it will return the index number of the failing header as well an error describing what went wrong.

The verify parameter can be used to fine tune whether nonce verification should be done or not. The reason behind the optional check is because some of the header retrieval mechanisms already need to verify nonces, as well as because nonces can be verified sparsely, not needing to check each.

func (*BlockChain) InsertReceiptChain added in v1.3.1

func (bc *BlockChain) InsertReceiptChain(blockChain types.Blocks, receiptChain []types.Receipts) (int, error)

InsertReceiptChain attempts to complete an already existing header chain with transaction and receipt data.

func (*BlockChain) PostChainEvents added in v1.7.0

func (bc *BlockChain) PostChainEvents(events []interface{}, logs []*types.Log)

PostChainEvents iterates over the events generated by a chain insertion and posts them into the event feed. TODO: Should not expose PostChainEvents. The chain events should be posted in WriteBlock.

func (*BlockChain) Processor added in v1.3.2

func (bc *BlockChain) Processor() Processor

Processor returns the current processor.

func (*BlockChain) Reset added in v1.3.1

func (bc *BlockChain) Reset() error

Reset purges the entire blockchain, restoring it to its genesis state.

func (*BlockChain) ResetWithGenesisBlock added in v1.3.1

func (bc *BlockChain) ResetWithGenesisBlock(genesis *types.Block) error

ResetWithGenesisBlock purges the entire blockchain, restoring it to the specified genesis state.

func (*BlockChain) Rollback added in v1.3.1

func (bc *BlockChain) Rollback(chain []common.Hash)

Rollback is designed to remove a chain of links from the database that aren't certain enough to be valid.

func (*BlockChain) SetHead added in v1.3.1

func (bc *BlockChain) SetHead(head uint64) error

SetHead rewinds the local chain to a new head. In the case of headers, everything above the new head will be deleted and the new one set. In the case of blocks though, the head may be further rewound if block bodies are missing (non-archive nodes after a fast sync).

func (*BlockChain) SetProcessor added in v1.3.1

func (bc *BlockChain) SetProcessor(processor Processor)

SetProcessor sets the processor required for making state modifications.

func (*BlockChain) SetValidator added in v1.3.2

func (bc *BlockChain) SetValidator(validator Validator)

SetValidator sets the validator which is used to validate incoming blocks.

func (*BlockChain) State added in v1.3.1

func (bc *BlockChain) State() (*state.StateDB, error)

State returns a new mutable state based on the current HEAD block.

func (*BlockChain) StateAt added in v1.4.14

func (bc *BlockChain) StateAt(root common.Hash) (*state.StateDB, error)

StateAt returns a new mutable state based on a particular point in time.

func (*BlockChain) Stop added in v1.3.1

func (bc *BlockChain) Stop()

Stop stops the blockchain service. If any imports are currently in progress it will abort them using the procInterrupt.

func (*BlockChain) SubscribeChainEvent added in v1.7.0

func (bc *BlockChain) SubscribeChainEvent(ch chan<- ChainEvent) event.Subscription

SubscribeChainEvent registers a subscription of ChainEvent.

func (*BlockChain) SubscribeChainHeadEvent added in v1.7.0

func (bc *BlockChain) SubscribeChainHeadEvent(ch chan<- ChainHeadEvent) event.Subscription

SubscribeChainHeadEvent registers a subscription of ChainHeadEvent.

func (*BlockChain) SubscribeChainSideEvent added in v1.7.0

func (bc *BlockChain) SubscribeChainSideEvent(ch chan<- ChainSideEvent) event.Subscription

SubscribeChainSideEvent registers a subscription of ChainSideEvent.

func (*BlockChain) SubscribeLogsEvent added in v1.7.0

func (bc *BlockChain) SubscribeLogsEvent(ch chan<- []*types.Log) event.Subscription

SubscribeLogsEvent registers a subscription of []*types.Log.

func (*BlockChain) SubscribeRemovedLogsEvent added in v1.7.0

func (bc *BlockChain) SubscribeRemovedLogsEvent(ch chan<- RemovedLogsEvent) event.Subscription

SubscribeRemovedLogsEvent registers a subscription of RemovedLogsEvent.

func (*BlockChain) TrieNode added in v1.8.0

func (bc *BlockChain) TrieNode(hash common.Hash) ([]byte, error)

TrieNode retrieves a blob of data associated with a trie node (or code hash) either from ephemeral in-memory cache, or from persistent storage.

func (*BlockChain) Validator added in v1.3.2

func (bc *BlockChain) Validator() Validator

Validator returns the current validator.

func (*BlockChain) WriteBlockWithState added in v1.8.0

func (bc *BlockChain) WriteBlockWithState(block *types.Block, receipts []*types.Receipt, state *state.StateDB) (status WriteStatus, err error)

WriteBlockWithState writes the block and all associated state to the database.

func (*BlockChain) WriteBlockWithoutState added in v1.8.0

func (bc *BlockChain) WriteBlockWithoutState(block *types.Block, td *big.Int) (err error)

WriteBlockWithoutState writes only the block and its metadata to the database, but does not write any state. This is used to construct competing side forks up to the point where they exceed the canonical total difficulty.

type BlockGen added in v0.9.34

type BlockGen struct {
	// contains filtered or unexported fields
}

BlockGen creates blocks for testing. See GenerateChain for a detailed explanation.

func (*BlockGen) AddTx added in v0.9.34

func (b *BlockGen) AddTx(tx *types.Transaction)

AddTx adds a transaction to the generated block. If no coinbase has been set, the block's coinbase is set to the zero address.

AddTx panics if the transaction cannot be executed. In addition to the protocol-imposed limitations (gas limit, etc.), there are some further limitations on the content of transactions that can be added. Notably, contract code relying on the BLOCKHASH instruction will panic during execution.

func (*BlockGen) AddTxWithChain added in v1.8.3

func (b *BlockGen) AddTxWithChain(bc *BlockChain, tx *types.Transaction)

AddTxWithChain adds a transaction to the generated block. If no coinbase has been set, the block's coinbase is set to the zero address.

AddTxWithChain panics if the transaction cannot be executed. In addition to the protocol-imposed limitations (gas limit, etc.), there are some further limitations on the content of transactions that can be added. If contract code relies on the BLOCKHASH instruction, the block in chain will be returned.

func (*BlockGen) AddUncheckedReceipt added in v1.3.1

func (b *BlockGen) AddUncheckedReceipt(receipt *types.Receipt)

AddUncheckedReceipt forcefully adds a receipts to the block without a backing transaction.

AddUncheckedReceipt will cause consensus failures when used during real chain processing. This is best used in conjunction with raw block insertion.

func (*BlockGen) AddUncle added in v0.9.34

func (b *BlockGen) AddUncle(h *types.Header)

AddUncle adds an uncle header to the generated block.

func (*BlockGen) Number added in v1.4.0

func (b *BlockGen) Number() *big.Int

Number returns the block number of the block being generated.

func (*BlockGen) OffsetTime added in v1.2.2

func (b *BlockGen) OffsetTime(seconds int64)

OffsetTime modifies the time instance of a block, implicitly changing its associated difficulty. It's useful to test scenarios where forking is not tied to chain length directly.

func (*BlockGen) PrevBlock added in v0.9.34

func (b *BlockGen) PrevBlock(index int) *types.Block

PrevBlock returns a previously generated block by number. It panics if num is greater or equal to the number of the block being generated. For index -1, PrevBlock returns the parent block given to GenerateChain.

func (*BlockGen) SetCoinbase added in v0.9.34

func (b *BlockGen) SetCoinbase(addr common.Address)

SetCoinbase sets the coinbase of the generated block. It can be called at most once.

func (*BlockGen) SetExtra added in v0.9.34

func (b *BlockGen) SetExtra(data []byte)

SetExtra sets the extra data field of the generated block.

func (*BlockGen) TxNonce added in v0.9.34

func (b *BlockGen) TxNonce(addr common.Address) uint64

TxNonce returns the next valid transaction nonce for the account at addr. It panics if the account does not exist.

type BlockValidator added in v1.3.2

type BlockValidator struct {
	// contains filtered or unexported fields
}

BlockValidator is responsible for validating block headers, uncles and processed state.

BlockValidator implements Validator.

func NewBlockValidator added in v1.3.2

func NewBlockValidator(config *params.ChainConfig, blockchain *BlockChain, engine consensus.Engine) *BlockValidator

NewBlockValidator returns a new block validator which is safe for re-use

func (*BlockValidator) ValidateBody added in v1.6.0

func (v *BlockValidator) ValidateBody(block *types.Block) error

ValidateBody validates the given block's uncles and verifies the the block header's transaction and uncle roots. The headers are assumed to be already validated at this point.

func (*BlockValidator) ValidateState added in v1.3.2

func (v *BlockValidator) ValidateState(block, parent *types.Block, statedb *state.StateDB, receipts types.Receipts, usedGas uint64) error

ValidateState validates the various changes that happen after a state transition, such as amount of used gas, the receipt roots and the state root itself. ValidateState returns a database batch if the validation was a success otherwise nil and an error is returned.

type CacheConfig added in v1.8.0

type CacheConfig struct {
	Disabled      bool          // Whether to disable trie write caching (archive node)
	TrieNodeLimit int           // Memory limit (MB) at which to flush the current in-memory trie to disk
	TrieTimeLimit time.Duration // Time limit after which to flush the current in-memory trie to disk
}

CacheConfig contains the configuration values for the trie caching/pruning that's resident in a blockchain.

type ChainContext added in v1.6.0

type ChainContext interface {
	// Engine retrieves the chain's consensus engine.
	Engine() consensus.Engine

	// GetHeader returns the hash corresponding to their hash.
	GetHeader(common.Hash, uint64) *types.Header
}

ChainContext supports retrieving headers and consensus parameters from the current blockchain to be used during transaction processing.

type ChainEvent added in v0.8.4

type ChainEvent struct {
	Block *types.Block
	Hash  common.Hash
	Logs  []*types.Log
}

type ChainHeadEvent added in v0.9.17

type ChainHeadEvent struct{ Block *types.Block }

type ChainIndexer added in v1.7.0

type ChainIndexer struct {
	// contains filtered or unexported fields
}

ChainIndexer does a post-processing job for equally sized sections of the canonical chain (like BlooomBits and CHT structures). A ChainIndexer is connected to the blockchain through the event system by starting a ChainEventLoop in a goroutine.

Further child ChainIndexers can be added which use the output of the parent section indexer. These child indexers receive new head notifications only after an entire section has been finished or in case of rollbacks that might affect already finished sections.

func NewChainIndexer added in v1.7.0

func NewChainIndexer(chainDb, indexDb ethdb.Database, backend ChainIndexerBackend, section, confirm uint64, throttling time.Duration, kind string) *ChainIndexer

NewChainIndexer creates a new chain indexer to do background processing on chain segments of a given size after certain number of confirmations passed. The throttling parameter might be used to prevent database thrashing.

func (*ChainIndexer) AddChildIndexer added in v1.7.0

func (c *ChainIndexer) AddChildIndexer(indexer *ChainIndexer)

AddChildIndexer adds a child ChainIndexer that can use the output of this one

func (*ChainIndexer) AddKnownSectionHead added in v1.7.3

func (c *ChainIndexer) AddKnownSectionHead(section uint64, shead common.Hash)

AddKnownSectionHead marks a new section head as known/processed if it is newer than the already known best section head

func (*ChainIndexer) Close added in v1.7.0

func (c *ChainIndexer) Close() error

Close tears down all goroutines belonging to the indexer and returns any error that might have occurred internally.

func (*ChainIndexer) SectionHead added in v1.7.3

func (c *ChainIndexer) SectionHead(section uint64) common.Hash

SectionHead retrieves the last block hash of a processed section from the index database.

func (*ChainIndexer) Sections added in v1.7.0

func (c *ChainIndexer) Sections() (uint64, uint64, common.Hash)

Sections returns the number of processed sections maintained by the indexer and also the information about the last header indexed for potential canonical verifications.

func (*ChainIndexer) Start added in v1.7.0

func (c *ChainIndexer) Start(chain ChainIndexerChain)

Start creates a goroutine to feed chain head events into the indexer for cascading background processing. Children do not need to be started, they are notified about new events by their parents.

type ChainIndexerBackend added in v1.7.0

type ChainIndexerBackend interface {
	// Reset initiates the processing of a new chain segment, potentially terminating
	// any partially completed operations (in case of a reorg).
	Reset(section uint64, prevHead common.Hash) error

	// Process crunches through the next header in the chain segment. The caller
	// will ensure a sequential order of headers.
	Process(header *types.Header)

	// Commit finalizes the section metadata and stores it into the database.
	Commit() error
}

ChainIndexerBackend defines the methods needed to process chain segments in the background and write the segment results into the database. These can be used to create filter blooms or CHTs.

type ChainIndexerChain added in v1.7.3

type ChainIndexerChain interface {
	// CurrentHeader retrieves the latest locally known header.
	CurrentHeader() *types.Header

	// SubscribeChainEvent subscribes to new head header notifications.
	SubscribeChainEvent(ch chan<- ChainEvent) event.Subscription
}

ChainIndexerChain interface is used for connecting the indexer to a blockchain

type ChainSideEvent added in v0.9.17

type ChainSideEvent struct {
	Block *types.Block
}

type DatabaseDeleter added in v1.7.0

type DatabaseDeleter interface {
	Delete(key []byte) error
}

DatabaseDeleter wraps the Delete method of a backing data store.

type DatabaseReader added in v1.7.0

type DatabaseReader interface {
	Get(key []byte) (value []byte, err error)
}

DatabaseReader wraps the Get method of a backing data store.

type DeleteCallback added in v1.4.0

type DeleteCallback func(common.Hash, uint64)

DeleteCallback is a callback function that is called by SetHead before each header is deleted.

type GasPool added in v1.0.3

type GasPool uint64

GasPool tracks the amount of gas available during execution of the transactions in a block. The zero value is a pool with zero gas available.

func (*GasPool) AddGas added in v1.0.3

func (gp *GasPool) AddGas(amount uint64) *GasPool

AddGas makes gas available for execution.

func (*GasPool) Gas added in v1.8.0

func (gp *GasPool) Gas() uint64

Gas returns the amount of gas remaining in the pool.

func (*GasPool) String added in v1.3.1

func (gp *GasPool) String() string

func (*GasPool) SubGas added in v1.0.3

func (gp *GasPool) SubGas(amount uint64) error

SubGas deducts the given amount from the pool if enough gas is available and returns an error otherwise.

type Genesis

type Genesis struct {
	Config     *params.ChainConfig `json:"config"`
	Nonce      uint64              `json:"nonce"`
	Timestamp  uint64              `json:"timestamp"`
	ExtraData  []byte              `json:"extraData"`
	GasLimit   uint64              `json:"gasLimit"   gencodec:"required"`
	Difficulty *big.Int            `json:"difficulty" gencodec:"required"`
	Mixhash    common.Hash         `json:"mixHash"`
	Coinbase   common.Address      `json:"coinbase"`
	Alloc      GenesisAlloc        `json:"alloc"      gencodec:"required"`

	// These fields are used for consensus tests. Please don't use them
	// in actual genesis blocks.
	Number     uint64      `json:"number"`
	GasUsed    uint64      `json:"gasUsed"`
	ParentHash common.Hash `json:"parentHash"`
}

Genesis specifies the header fields, state of a genesis block. It also defines hard fork switch-over blocks through the chain configuration.

func DefaultGenesisBlock added in v1.4.0

func DefaultGenesisBlock() *Genesis

DefaultGenesisBlock returns the Ethereum main net genesis block.

func DefaultRinkebyGenesisBlock added in v1.6.1

func DefaultRinkebyGenesisBlock() *Genesis

DefaultRinkebyGenesisBlock returns the Rinkeby network genesis block.

func DefaultTestnetGenesisBlock added in v1.5.3

func DefaultTestnetGenesisBlock() *Genesis

DefaultTestnetGenesisBlock returns the Ropsten network genesis block.

func DeveloperGenesisBlock added in v1.7.3

func DeveloperGenesisBlock(period uint64, faucet common.Address) *Genesis

DeveloperGenesisBlock returns the 'geth --dev' genesis block. Note, this must be seeded with the

func (*Genesis) Commit added in v1.6.0

func (g *Genesis) Commit(db ethdb.Database) (*types.Block, error)

Commit writes the block and state of a genesis specification to the database. The block is committed as the canonical head block.

func (Genesis) MarshalJSON added in v1.6.0

func (g Genesis) MarshalJSON() ([]byte, error)

func (*Genesis) MustCommit added in v1.6.0

func (g *Genesis) MustCommit(db ethdb.Database) *types.Block

MustCommit writes the genesis block and state to db, panicking on error. The block is committed as the canonical head block.

func (*Genesis) ToBlock added in v1.6.0

func (g *Genesis) ToBlock(db ethdb.Database) *types.Block

ToBlock creates the genesis block and writes state of a genesis specification to the given database (or discards it if nil).

func (*Genesis) UnmarshalJSON added in v1.6.0

func (g *Genesis) UnmarshalJSON(input []byte) error

type GenesisAccount added in v1.2.2

type GenesisAccount struct {
	Code       []byte                      `json:"code,omitempty"`
	Storage    map[common.Hash]common.Hash `json:"storage,omitempty"`
	Balance    *big.Int                    `json:"balance" gencodec:"required"`
	Nonce      uint64                      `json:"nonce,omitempty"`
	PrivateKey []byte                      `json:"secretKey,omitempty"` // for tests
}

GenesisAccount is an account in the state of the genesis block.

func (GenesisAccount) MarshalJSON added in v1.6.0

func (g GenesisAccount) MarshalJSON() ([]byte, error)

func (*GenesisAccount) UnmarshalJSON added in v1.6.0

func (g *GenesisAccount) UnmarshalJSON(input []byte) error

type GenesisAlloc added in v1.6.0

type GenesisAlloc map[common.Address]GenesisAccount

GenesisAlloc specifies the initial state that is part of the genesis block.

func (*GenesisAlloc) UnmarshalJSON added in v1.6.7

func (ga *GenesisAlloc) UnmarshalJSON(data []byte) error

type GenesisMismatchError added in v1.6.0

type GenesisMismatchError struct {
	Stored, New common.Hash
}

GenesisMismatchError is raised when trying to overwrite an existing genesis block with an incompatible one.

func (*GenesisMismatchError) Error added in v1.6.0

func (e *GenesisMismatchError) Error() string

type HeaderChain added in v1.4.0

type HeaderChain struct {
	// contains filtered or unexported fields
}

HeaderChain implements the basic block header chain logic that is shared by core.BlockChain and light.LightChain. It is not usable in itself, only as a part of either structure. It is not thread safe either, the encapsulating chain structures should do the necessary mutex locking/unlocking.

func NewHeaderChain added in v1.4.0

func NewHeaderChain(chainDb ethdb.Database, config *params.ChainConfig, engine consensus.Engine, procInterrupt func() bool) (*HeaderChain, error)

NewHeaderChain creates a new HeaderChain structure.

getValidator should return the parent's validator
procInterrupt points to the parent's interrupt semaphore
wg points to the parent's shutdown wait group

func (*HeaderChain) Config added in v1.6.0

func (hc *HeaderChain) Config() *params.ChainConfig

Config retrieves the header chain's chain configuration.

func (*HeaderChain) CurrentHeader added in v1.4.0

func (hc *HeaderChain) CurrentHeader() *types.Header

CurrentHeader retrieves the current head header of the canonical chain. The header is retrieved from the HeaderChain's internal cache.

func (*HeaderChain) Engine added in v1.6.0

func (hc *HeaderChain) Engine() consensus.Engine

Engine retrieves the header chain's consensus engine.

func (*HeaderChain) GetBlock added in v1.6.0

func (hc *HeaderChain) GetBlock(hash common.Hash, number uint64) *types.Block

GetBlock implements consensus.ChainReader, and returns nil for every input as a header chain does not have blocks available for retrieval.

func (*HeaderChain) GetBlockHashesFromHash added in v1.4.0

func (hc *HeaderChain) GetBlockHashesFromHash(hash common.Hash, max uint64) []common.Hash

GetBlockHashesFromHash retrieves a number of block hashes starting at a given hash, fetching towards the genesis block.

func (*HeaderChain) GetBlockNumber added in v1.5.0

func (hc *HeaderChain) GetBlockNumber(hash common.Hash) uint64

GetBlockNumber retrieves the block number belonging to the given hash from the cache or database

func (*HeaderChain) GetHeader added in v1.4.0

func (hc *HeaderChain) GetHeader(hash common.Hash, number uint64) *types.Header

GetHeader retrieves a block header from the database by hash and number, caching it if found.

func (*HeaderChain) GetHeaderByHash added in v1.5.0

func (hc *HeaderChain) GetHeaderByHash(hash common.Hash) *types.Header

GetHeaderByHash retrieves a block header from the database by hash, caching it if found.

func (*HeaderChain) GetHeaderByNumber added in v1.4.0

func (hc *HeaderChain) GetHeaderByNumber(number uint64) *types.Header

GetHeaderByNumber retrieves a block header from the database by number, caching it (associated with its hash) if found.

func (*HeaderChain) GetTd added in v1.4.0

func (hc *HeaderChain) GetTd(hash common.Hash, number uint64) *big.Int

GetTd retrieves a block's total difficulty in the canonical chain from the database by hash and number, caching it if found.

func (*HeaderChain) GetTdByHash added in v1.5.0

func (hc *HeaderChain) GetTdByHash(hash common.Hash) *big.Int

GetTdByHash retrieves a block's total difficulty in the canonical chain from the database by hash, caching it if found.

func (*HeaderChain) HasHeader added in v1.4.0

func (hc *HeaderChain) HasHeader(hash common.Hash, number uint64) bool

HasHeader checks if a block header is present in the database or not.

func (*HeaderChain) InsertHeaderChain added in v1.4.0

func (hc *HeaderChain) InsertHeaderChain(chain []*types.Header, writeHeader WhCallback, start time.Time) (int, error)

InsertHeaderChain attempts to insert the given header chain in to the local chain, possibly creating a reorg. If an error is returned, it will return the index number of the failing header as well an error describing what went wrong.

The verify parameter can be used to fine tune whether nonce verification should be done or not. The reason behind the optional check is because some of the header retrieval mechanisms already need to verfy nonces, as well as because nonces can be verified sparsely, not needing to check each.

func (*HeaderChain) SetCurrentHeader added in v1.4.0

func (hc *HeaderChain) SetCurrentHeader(head *types.Header)

SetCurrentHeader sets the current head header of the canonical chain.

func (*HeaderChain) SetGenesis added in v1.4.0

func (hc *HeaderChain) SetGenesis(head *types.Header)

SetGenesis sets a new genesis block header for the chain

func (*HeaderChain) SetHead added in v1.4.0

func (hc *HeaderChain) SetHead(head uint64, delFn DeleteCallback)

SetHead rewinds the local chain to a new head. Everything above the new head will be deleted and the new one set.

func (*HeaderChain) ValidateHeaderChain added in v1.6.0

func (hc *HeaderChain) ValidateHeaderChain(chain []*types.Header, checkFreq int) (int, error)

func (*HeaderChain) WriteHeader added in v1.4.0

func (hc *HeaderChain) WriteHeader(header *types.Header) (status WriteStatus, err error)

WriteHeader writes a header into the local chain, given that its parent is already known. If the total difficulty of the newly inserted header becomes greater than the current known TD, the canonical chain is re-routed.

Note: This method is not concurrent-safe with inserting blocks simultaneously into the chain, as side effects caused by reorganisations cannot be emulated without the real blocks. Hence, writing headers directly should only be done in two scenarios: pure-header mode of operation (light clients), or properly separated header/block phases (non-archive clients).

func (*HeaderChain) WriteTd added in v1.4.0

func (hc *HeaderChain) WriteTd(hash common.Hash, number uint64, td *big.Int) error

WriteTd stores a block's total difficulty into the database, also caching it along the way.

type Message

type Message interface {
	From() common.Address
	//FromFrontier() (common.Address, error)
	To() *common.Address

	GasPrice() *big.Int
	Gas() uint64
	Value() *big.Int

	Nonce() uint64
	CheckNonce() bool
	Data() []byte
}

Message represents a message sent to a contract.

type NewMinedBlockEvent added in v0.8.4

type NewMinedBlockEvent struct{ Block *types.Block }

NewMinedBlockEvent is posted when a block has been imported.

type PendingLogsEvent added in v1.4.0

type PendingLogsEvent struct {
	Logs []*types.Log
}

PendingLogsEvent is posted pre mining and notifies of pending logs.

type PendingStateEvent added in v1.4.0

type PendingStateEvent struct{}

PendingStateEvent is posted pre mining and notifies of pending state changes.

type Processor added in v1.3.2

type Processor interface {
	Process(block *types.Block, statedb *state.StateDB, cfg vm.Config) (types.Receipts, []*types.Log, uint64, error)
}

Processor is an interface for processing blocks using a given initial state.

Process takes the block to be processed and the statedb upon which the initial state is based. It should return the receipts generated, amount of gas used in the process and return an error if any of the internal rules failed.

type RemovedLogsEvent added in v1.4.0

type RemovedLogsEvent struct{ Logs []*types.Log }

RemovedLogsEvent is posted when a reorg happens

type RemovedTransactionEvent added in v1.2.2

type RemovedTransactionEvent struct{ Txs types.Transactions }

RemovedTransactionEvent is posted when a reorg happens

type StateProcessor added in v1.3.2

type StateProcessor struct {
	// contains filtered or unexported fields
}

StateProcessor is a basic Processor, which takes care of transitioning state from one point to another.

StateProcessor implements Processor.

func NewStateProcessor added in v1.3.2

func NewStateProcessor(config *params.ChainConfig, bc *BlockChain, engine consensus.Engine) *StateProcessor

NewStateProcessor initialises a new StateProcessor.

func (*StateProcessor) Process added in v1.3.2

func (p *StateProcessor) Process(block *types.Block, statedb *state.StateDB, cfg vm.Config) (types.Receipts, []*types.Log, uint64, error)

Process processes the state changes according to the Ethereum rules by running the transaction messages using the statedb and applying any rewards to both the processor (coinbase) and any included uncles.

Process returns the receipts and logs accumulated during the process and returns the amount of gas that was used in the process. If any of the transactions failed to execute due to insufficient gas it will return an error.

type StateTransition

type StateTransition struct {
	// contains filtered or unexported fields
}

The State Transitioning Model

A state transition is a change made when a transaction is applied to the current world state The state transitioning model does all all the necessary work to work out a valid new state root.

1) Nonce handling 2) Pre pay gas 3) Create a new state object if the recipient is \0*32 4) Value transfer == If contract creation ==

4a) Attempt to run transaction data
4b) If valid, use result as code for the new state object

== end == 5) Run Script section 6) Derive new state root

func NewStateTransition

func NewStateTransition(evm *vm.EVM, msg Message, gp *GasPool) *StateTransition

NewStateTransition initialises and returns a new state transition object.

func (*StateTransition) TransitionDb added in v1.4.0

func (st *StateTransition) TransitionDb() (ret []byte, usedGas uint64, failed bool, err error)

TransitionDb will transition the state by applying the current message and returning the result including the the used gas. It returns an error if it failed. An error indicates a consensus issue.

type TxLookupEntry added in v1.7.3

type TxLookupEntry struct {
	BlockHash  common.Hash
	BlockIndex uint64
	Index      uint64
}

TxLookupEntry is a positional metadata to help looking up the data content of a transaction or receipt given only its hash.

type TxPool

type TxPool struct {
	// contains filtered or unexported fields
}

TxPool contains all currently known transactions. Transactions enter the pool when they are received from the network or submitted locally. They exit the pool when they are included in the blockchain.

The pool separates processable transactions (which can be applied to the current state) and future transactions. Transactions move between those two states over time as they are received and processed.

func NewTxPool

func NewTxPool(config TxPoolConfig, chainconfig *params.ChainConfig, chain blockChain) *TxPool

NewTxPool creates a new transaction pool to gather, sort and filter inbound transactions from the network.

func (*TxPool) AddLocal added in v1.6.7

func (pool *TxPool) AddLocal(tx *types.Transaction) error

AddLocal enqueues a single transaction into the pool if it is valid, marking the sender as a local one in the mean time, ensuring it goes around the local pricing constraints.

func (*TxPool) AddLocals added in v1.6.7

func (pool *TxPool) AddLocals(txs []*types.Transaction) []error

AddLocals enqueues a batch of transactions into the pool if they are valid, marking the senders as a local ones in the mean time, ensuring they go around the local pricing constraints.

func (*TxPool) AddRemote added in v1.6.7

func (pool *TxPool) AddRemote(tx *types.Transaction) error

AddRemote enqueues a single transaction into the pool if it is valid. If the sender is not among the locally tracked ones, full pricing constraints will apply.

func (*TxPool) AddRemotes added in v1.6.7

func (pool *TxPool) AddRemotes(txs []*types.Transaction) []error

AddRemotes enqueues a batch of transactions into the pool if they are valid. If the senders are not among the locally tracked ones, full pricing constraints will apply.

func (*TxPool) Content added in v1.4.0

func (pool *TxPool) Content() (map[common.Address]types.Transactions, map[common.Address]types.Transactions)

Content retrieves the data content of the transaction pool, returning all the pending as well as queued transactions, grouped by account and sorted by nonce.

func (*TxPool) GasPrice added in v1.6.2

func (pool *TxPool) GasPrice() *big.Int

GasPrice returns the current gas price enforced by the transaction pool.

func (*TxPool) Get added in v1.4.17

func (pool *TxPool) Get(hash common.Hash) *types.Transaction

Get returns a transaction if it is contained in the pool and nil otherwise.

func (*TxPool) Pending added in v1.4.17

func (pool *TxPool) Pending() (map[common.Address]types.Transactions, error)

Pending retrieves all currently processable transactions, groupped by origin account and sorted by nonce. The returned transaction set is a copy and can be freely modified by calling code.

func (*TxPool) SetGasPrice added in v1.6.2

func (pool *TxPool) SetGasPrice(price *big.Int)

SetGasPrice updates the minimum price required by the transaction pool for a new transaction, and drops all transactions below this threshold.

func (*TxPool) State added in v0.9.28

func (pool *TxPool) State() *state.ManagedState

State returns the virtual managed state of the transaction pool.

func (*TxPool) Stats added in v0.9.36

func (pool *TxPool) Stats() (int, int)

Stats retrieves the current pool stats, namely the number of pending and the number of queued (non-executable) transactions.

func (*TxPool) Status added in v1.7.3

func (pool *TxPool) Status(hashes []common.Hash) []TxStatus

Status returns the status (unknown/pending/queued) of a batch of transactions identified by their hashes.

func (*TxPool) Stop

func (pool *TxPool) Stop()

Stop terminates the transaction pool.

func (*TxPool) SubscribeTxPreEvent added in v1.7.0

func (pool *TxPool) SubscribeTxPreEvent(ch chan<- TxPreEvent) event.Subscription

SubscribeTxPreEvent registers a subscription of TxPreEvent and starts sending event to the given channel.

type TxPoolConfig added in v1.6.2

type TxPoolConfig struct {
	NoLocals  bool          // Whether local transaction handling should be disabled
	Journal   string        // Journal of local transactions to survive node restarts
	Rejournal time.Duration // Time interval to regenerate the local transaction journal

	PriceLimit uint64 // Minimum gas price to enforce for acceptance into the pool
	PriceBump  uint64 // Minimum price bump percentage to replace an already existing transaction (nonce)

	AccountSlots uint64 // Minimum number of executable transaction slots guaranteed per account
	GlobalSlots  uint64 // Maximum number of executable transaction slots for all accounts
	AccountQueue uint64 // Maximum number of non-executable transaction slots permitted per account
	GlobalQueue  uint64 // Maximum number of non-executable transaction slots for all accounts

	Lifetime time.Duration // Maximum amount of time non-executable transaction are queued
}

TxPoolConfig are the configuration parameters of the transaction pool.

type TxPreEvent

type TxPreEvent struct{ Tx *types.Transaction }

TxPreEvent is posted when a transaction enters the transaction pool.

type TxStatus added in v1.7.3

type TxStatus uint

TxStatus is the current status of a transaction as seen by the pool.

const (
	TxStatusUnknown TxStatus = iota
	TxStatusQueued
	TxStatusPending
	TxStatusIncluded
)

type Validator added in v1.3.2

type Validator interface {
	// ValidateBody validates the given block's content.
	ValidateBody(block *types.Block) error

	// ValidateState validates the given statedb and optionally the receipts and
	// gas used.
	ValidateState(block, parent *types.Block, state *state.StateDB, receipts types.Receipts, usedGas uint64) error
}

Validator is an interface which defines the standard for block validation. It is only responsible for validating block contents, as the header validation is done by the specific consensus engines.

type WhCallback added in v1.4.0

type WhCallback func(*types.Header) error

WhCallback is a callback function for inserting individual headers. A callback is used for two reasons: first, in a LightChain, status should be processed and light chain events sent, while in a BlockChain this is not necessary since chain events are sent after inserting blocks. Second, the header writes should be protected by the parent chain mutex individually.

type WriteStatus added in v1.4.0

type WriteStatus byte

WriteStatus status of write

const (
	NonStatTy WriteStatus = iota
	CanonStatTy
	SideStatTy
)

Directories

Path Synopsis
Provides support for dealing with EVM assembly instructions (e.g., disassembling them).
Provides support for dealing with EVM assembly instructions (e.g., disassembling them).
Package bloombits implements bloom filtering on batches of data.
Package bloombits implements bloom filtering on batches of data.
Package state provides a caching layer atop the Ethereum state trie.
Package state provides a caching layer atop the Ethereum state trie.
Package types contains data types related to Ethereum consensus.
Package types contains data types related to Ethereum consensus.
vm
Package vm implements the Ethereum Virtual Machine.
Package vm implements the Ethereum Virtual Machine.
runtime
Package runtime provides a basic execution model for executing EVM code.
Package runtime provides a basic execution model for executing EVM code.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL