ethereum

package module
v1.4.1 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: May 6, 2019 License: GPL-3.0 Imports: 5 Imported by: 0

README

Tomochain

Build Status

About Tomochain

TomoChain is an innovative solution to the scalability problem with the Ethereum blockchain. Our mission is to be a leading force in building the Internet of Value, and its infrastructure. We are working to create an alternative, scalable financial system which is more secure, transparent, efficient, inclusive, and equitable for everyone.

TomoChain relies on a system of 150 Masternodes with a Proof of Stake Voting consensus that can support near-zero fee, and 2-second transaction confirmation times. Security, stability, and chain finality are guaranteed via novel techniques such as double validation, staking via smart-contracts, and "true" randomization processes.

Tomochain supports all EVM-compatible smart-contracts, protocols, and atomic cross-chain token transfers. New scaling techniques such as sharding, private-chain generation, and hardware integration will be continuously researched and incorporated into Tomochain's masternode architecture. This architecture will be an ideal scalable smart-contract public blockchain for decentralized apps, token issuances, and token integrations for small and big businesses.

More details can be found at our technical white paper

Read more about us on:

Building the source

Tomochain provides a client binary called tomo for both running a masternode and running a full-node. Building tomo requires both a Go (1.7+) and C compiler; install both of these.

Once the dependencies are installed, just run the below commands:

$ git clone https://github.com/tomochain/tomochain tomochain
$ cd tomochain
$ make tomo

Alternatively, you could quickly download our pre-complied binary from our github release page

Running tomo

Running a tomo masternode

Please refer to the official documentation on how to run a node if your goal is to run a masternode. The recommanded ways of running a node and applying to become a masternode are explained in detail there.

Attaching to the Tomochain test network

We published our test network 2.0 with full implementation of PoSV consensus at https://stats.testnet.tomochain.com. If you'd like to experiment with smart contract creation and DApps, you might be interested to give these a try on our Testnet.

In order to connect to one of the masternodes on the Testnet, just run the command below:

$ tomo attach https://testnet.tomochain.com

This will open the JavaScript console and let you query the blockchain directly via RPC.

Running tomo locally

If you would like to run tomo locally to see how it works under the hood and have a copy of the blockchain, you can try it on our Testnet by running the commands below:

// 1. create a folder to store tomochain data on your machine
$ export DATA_DIR=/path/to/your/data/folder
$ mkdir -p $DATA_DIR/tomo

// 2. download our genesis file
$ export GENESIS_PATH=$DATA_DIR/genesis.json
$ curl -L https://raw.githubusercontent.com/tomochain/tomochain/master/genesis/testnet.json -o $GENESIS_PATH

// 3. init the chain from genesis
$ tomo init $GENESIS_PATH --datadir $DATA_DIR

// 4. get a test account. Create a new one if you don't have any:
$ export KEYSTORE_DIR=keystore
$ touch $DATA_DIR/password && echo 'your-password' > $DATA_DIR/password
$ tomo account new \
      --datadir $DATA_DIR \
      --keystore $KEYSTORE_DIR \
      --password $DATA_DIR/password

// if you already have a test account, import it now
$ tomo  account import ./private_key \
      --datadir $DATA_DIR \
      --keystore $KEYSTORE_DIR \
      --password $DATA_DIR/password

// get the account
$ account=$(
  tomo account list --datadir $DATA_DIR  --keystore $KEYSTORE_DIR \
  2> /dev/null \
  | head -n 1 \
  | cut -d"{" -f 2 | cut -d"}" -f 1
)

// 5. prepare the bootnodes list
$ export BOOTNODES="enode://4d3c2cc0ce7135c1778c6f1cfda623ab44b4b6db55289543d48ecfde7d7111fd420c42174a9f2fea511a04cf6eac4ec69b4456bfaaae0e5bd236107d3172b013@52.221.28.223:30301,enode://298780104303fcdb37a84c5702ebd9ec660971629f68a933fd91f7350c54eea0e294b0857f1fd2e8dba2869fcc36b83e6de553c386cf4ff26f19672955d9f312@13.251.101.216:30301,enode://46dba3a8721c589bede3c134d755eb1a38ae7c5a4c69249b8317c55adc8d46a369f98b06514ecec4b4ff150712085176818d18f59a9e6311a52dbe68cff5b2ae@13.250.94.232:30301"

// 6. Start up tomo now
$ export NAME=YOUR_NODE_NAME
$ tomo \
  --verbosity 4 \
  --datadir $DATA_DIR \
  --keystore $KEYSTORE_DIR \
  --identity $NAME \
  --password $DATA_DIR \
  --networkid 89 \
  --port 30303 \
  --rpc \
  --rpccorsdomain "*" \
  --rpcaddr 0.0.0.0 \
  --rpcport 8545 \
  --rpcvhosts "*" \
  --ws \
  --wsaddr 0.0.0.0 \
  --wsport 8546 \
  --wsorigins "*" \
  --mine \
  --gasprice "1" \
  --targetgaslimit "420000000"

Some explanations on the flags

--verbosity: log level from 1 to 5. Here we're using 4 for debug messages
--datadir: path to your data directory created above.
--keystore: path to your account's keystore created above.
--identity: your full-node's name.
--password: your account's password.
--networkid: our testnet network ID.
--port: your full-node's listening port (default to 30303)
--rpc, --rpccorsdomain, --rpcaddr, --rpcport, --rpcvhosts: your full-node will accept RPC requests at 8545 TCP.
--ws, --wsaddr, --wsport, --wsorigins: your full-node will accept Websocket requests at 8546 TCP.
--mine: your full-node wants to register to be a candidate for masternode selection.
--gasprice: Minimal gas price to accept for mining a transaction.
--targetgaslimit: Target gas limit sets the artificial target gas floor for the blocks to mine (default: 4712388)

Road map

The implementation of the following features is being studied by our research team:

  • Layer 2 scalability with state sharding
  • DEX integration
  • Spam filtering
  • Multi-chain interoperabilty

Contributing and technical discussion

Thank you for considering to try out our network and/or help out with the source code. We would love to get your help; feel free to lend a hand. Even the smallest bit of code, bug reporting, or just discussing ideas are highly appreciated.

If you would like to contribute to the tomochain source code, please refer to our Developer Guide for details on configuring development environment, managing dependencies, compiling, testing and submitting your code changes to our repo.

Please also make sure your contributions adhere to the base coding guidelines:

  • Code must adhere to official Go formatting guidelines (i.e uses gofmt).
  • Code comments must adhere to the official Go commentary guidelines.
  • Pull requests need to be based on and opened against the master branch.
  • Any code you are trying to contribute must be well-explained as an issue on our github issue page
  • Commit messages should be short but clear enough and should refer to the corresponding pre-logged issue mentioned above.

For technical discussion, feel free to join our chat at Gitter.

Documentation

Overview

Package ethereum defines interfaces for interacting with Ethereum.

Index

Constants

This section is empty.

Variables

View Source
var NotFound = errors.New("not found")

NotFound is returned by API methods if the requested item does not exist.

Functions

This section is empty.

Types

type CallMsg

type CallMsg struct {
	From     common.Address  // the sender of the 'transaction'
	To       *common.Address // the destination contract (nil for contract creation)
	Gas      uint64          // if 0, the call executes with near-infinite gas
	GasPrice *big.Int        // wei <-> gas exchange ratio
	Value    *big.Int        // amount of wei sent along with the call
	Data     []byte          // input data, usually an ABI-encoded contract method invocation
}

CallMsg contains parameters for contract calls.

type ChainReader

type ChainReader interface {
	BlockByHash(ctx context.Context, hash common.Hash) (*types.Block, error)
	BlockByNumber(ctx context.Context, number *big.Int) (*types.Block, error)
	HeaderByHash(ctx context.Context, hash common.Hash) (*types.Header, error)
	HeaderByNumber(ctx context.Context, number *big.Int) (*types.Header, error)
	TransactionCount(ctx context.Context, blockHash common.Hash) (uint, error)
	TransactionInBlock(ctx context.Context, blockHash common.Hash, index uint) (*types.Transaction, error)

	// This method subscribes to notifications about changes of the head block of
	// the canonical chain.
	SubscribeNewHead(ctx context.Context, ch chan<- *types.Header) (Subscription, error)
}

ChainReader provides access to the blockchain. The methods in this interface access raw data from either the canonical chain (when requesting by block number) or any blockchain fork that was previously downloaded and processed by the node. The block number argument can be nil to select the latest canonical block. Reading block headers should be preferred over full blocks whenever possible.

The returned error is NotFound if the requested item does not exist.

type ChainStateReader

type ChainStateReader interface {
	BalanceAt(ctx context.Context, account common.Address, blockNumber *big.Int) (*big.Int, error)
	StorageAt(ctx context.Context, account common.Address, key common.Hash, blockNumber *big.Int) ([]byte, error)
	CodeAt(ctx context.Context, account common.Address, blockNumber *big.Int) ([]byte, error)
	NonceAt(ctx context.Context, account common.Address, blockNumber *big.Int) (uint64, error)
}

ChainStateReader wraps access to the state trie of the canonical blockchain. Note that implementations of the interface may be unable to return state values for old blocks. In many cases, using CallContract can be preferable to reading raw contract storage.

type ChainSyncReader

type ChainSyncReader interface {
	SyncProgress(ctx context.Context) (*SyncProgress, error)
}

ChainSyncReader wraps access to the node's current sync status. If there's no sync currently running, it returns nil.

type ContractCaller

type ContractCaller interface {
	CallContract(ctx context.Context, call CallMsg, blockNumber *big.Int) ([]byte, error)
}

A ContractCaller provides contract calls, essentially transactions that are executed by the EVM but not mined into the blockchain. ContractCall is a low-level method to execute such calls. For applications which are structured around specific contracts, the abigen tool provides a nicer, properly typed way to perform calls.

type FilterQuery

type FilterQuery struct {
	FromBlock *big.Int         // beginning of the queried range, nil means genesis block
	ToBlock   *big.Int         // end of the range, nil means latest block
	Addresses []common.Address // restricts matches to events created by specific contracts

	// The Topic list restricts matches to particular event topics. Each event has a list
	// of topics. Topics matches a prefix of that list. An empty element slice matches any
	// topic. Non-empty elements represent an alternative that matches any of the
	// contained topics.
	//
	// Examples:
	// {} or nil          matches any topic list
	// {{A}}              matches topic A in first position
	// {{}, {B}}          matches any topic in first position, B in second position
	// {{A}}, {B}}        matches topic A in first position, B in second position
	// {{A, B}}, {C, D}}  matches topic (A OR B) in first position, (C OR D) in second position
	Topics [][]common.Hash
}

FilterQuery contains options for contract log filtering.

type GasEstimator

type GasEstimator interface {
	EstimateGas(ctx context.Context, call CallMsg) (uint64, error)
}

GasEstimator wraps EstimateGas, which tries to estimate the gas needed to execute a specific transaction based on the pending state. There is no guarantee that this is the true gas limit requirement as other transactions may be added or removed by miners, but it should provide a basis for setting a reasonable default.

type GasPricer

type GasPricer interface {
	SuggestGasPrice(ctx context.Context) (*big.Int, error)
}

GasPricer wraps the gas price oracle, which monitors the blockchain to determine the optimal gas price given current fee market conditions.

type LogFilterer

type LogFilterer interface {
	FilterLogs(ctx context.Context, q FilterQuery) ([]types.Log, error)
	SubscribeFilterLogs(ctx context.Context, q FilterQuery, ch chan<- types.Log) (Subscription, error)
}

LogFilterer provides access to contract log events using a one-off query or continuous event subscription.

Logs received through a streaming query subscription may have Removed set to true, indicating that the log was reverted due to a chain reorganisation.

type PendingContractCaller

type PendingContractCaller interface {
	PendingCallContract(ctx context.Context, call CallMsg) ([]byte, error)
}

PendingContractCaller can be used to perform calls against the pending state.

type PendingStateEventer

type PendingStateEventer interface {
	SubscribePendingTransactions(ctx context.Context, ch chan<- *types.Transaction) (Subscription, error)
}

A PendingStateEventer provides access to real time notifications about changes to the pending state.

type PendingStateReader

type PendingStateReader interface {
	PendingBalanceAt(ctx context.Context, account common.Address) (*big.Int, error)
	PendingStorageAt(ctx context.Context, account common.Address, key common.Hash) ([]byte, error)
	PendingCodeAt(ctx context.Context, account common.Address) ([]byte, error)
	PendingNonceAt(ctx context.Context, account common.Address) (uint64, error)
	PendingTransactionCount(ctx context.Context) (uint, error)
}

A PendingStateReader provides access to the pending state, which is the result of all known executable transactions which have not yet been included in the blockchain. It is commonly used to display the result of ’unconfirmed’ actions (e.g. wallet value transfers) initiated by the user. The PendingNonceAt operation is a good way to retrieve the next available transaction nonce for a specific account.

type Subscription

type Subscription interface {
	// Unsubscribe cancels the sending of events to the data channel
	// and closes the error channel.
	Unsubscribe()
	// Err returns the subscription error channel. The error channel receives
	// a value if there is an issue with the subscription (e.g. the network connection
	// delivering the events has been closed). Only one value will ever be sent.
	// The error channel is closed by Unsubscribe.
	Err() <-chan error
}

Subscription represents an event subscription where events are delivered on a data channel.

type SyncProgress

type SyncProgress struct {
	StartingBlock uint64 // Block number where sync began
	CurrentBlock  uint64 // Current block number where sync is at
	HighestBlock  uint64 // Highest alleged block number in the chain
	PulledStates  uint64 // Number of state trie entries already downloaded
	KnownStates   uint64 // Total number of state trie entries known about
}

SyncProgress gives progress indications when the node is synchronising with the Ethereum network.

type TransactionReader

type TransactionReader interface {
	// TransactionByHash checks the pool of pending transactions in addition to the
	// blockchain. The isPending return value indicates whether the transaction has been
	// mined yet. Note that the transaction may not be part of the canonical chain even if
	// it's not pending.
	TransactionByHash(ctx context.Context, txHash common.Hash) (tx *types.Transaction, isPending bool, err error)
	// TransactionReceipt returns the receipt of a mined transaction. Note that the
	// transaction may not be included in the current canonical chain even if a receipt
	// exists.
	TransactionReceipt(ctx context.Context, txHash common.Hash) (*types.Receipt, error)
}

TransactionReader provides access to past transactions and their receipts. Implementations may impose arbitrary restrictions on the transactions and receipts that can be retrieved. Historic transactions may not be available.

Avoid relying on this interface if possible. Contract logs (through the LogFilterer interface) are more reliable and usually safer in the presence of chain reorganisations.

The returned error is NotFound if the requested item does not exist.

type TransactionSender

type TransactionSender interface {
	SendTransaction(ctx context.Context, tx *types.Transaction) error
}

TransactionSender wraps transaction sending. The SendTransaction method injects a signed transaction into the pending transaction pool for execution. If the transaction was a contract creation, the TransactionReceipt method can be used to retrieve the contract address after the transaction has been mined.

The transaction must be signed and have a valid nonce to be included. Consumers of the API can use package accounts to maintain local private keys and need can retrieve the next available nonce using PendingNonceAt.

Directories

Path Synopsis
Package accounts implements high level Ethereum account management.
Package accounts implements high level Ethereum account management.
abi
Package abi implements the Ethereum ABI (Application Binary Interface).
Package abi implements the Ethereum ABI (Application Binary Interface).
abi/bind
Package bind generates Ethereum contract Go bindings.
Package bind generates Ethereum contract Go bindings.
keystore
Package keystore implements encrypted storage of secp256k1 private keys.
Package keystore implements encrypted storage of secp256k1 private keys.
usbwallet
Package usbwallet implements support for USB hardware wallets.
Package usbwallet implements support for USB hardware wallets.
usbwallet/internal/trezor
Package trezor contains the wire protocol wrapper in Go.
Package trezor contains the wire protocol wrapper in Go.
Package bmt provides a binary merkle tree implementation
Package bmt provides a binary merkle tree implementation
cmd
bootnode
bootnode runs a bootstrap node for the Ethereum Discovery Protocol.
bootnode runs a bootstrap node for the Ethereum Discovery Protocol.
evm
evm executes EVM code snippets.
evm executes EVM code snippets.
faucet
faucet is a Ether faucet backed by a light client.
faucet is a Ether faucet backed by a light client.
gc
internal/browser
Package browser provides utilities for interacting with users' browsers.
Package browser provides utilities for interacting with users' browsers.
p2psim
p2psim provides a command-line client for a simulation HTTP API.
p2psim provides a command-line client for a simulation HTTP API.
puppeth
puppeth is a command to assemble and maintain private networks.
puppeth is a command to assemble and maintain private networks.
rlpdump
rlpdump is a pretty-printer for RLP data.
rlpdump is a pretty-printer for RLP data.
swarm
Command bzzhash computes a swarm tree hash.
Command bzzhash computes a swarm tree hash.
utils
Package utils contains internal helper functions for go-ethereum commands.
Package utils contains internal helper functions for go-ethereum commands.
Package common contains various helper functions.
Package common contains various helper functions.
bitutil
Package bitutil implements fast bitwise operations.
Package bitutil implements fast bitwise operations.
compiler
Package compiler wraps the Solidity compiler executable (solc).
Package compiler wraps the Solidity compiler executable (solc).
hexutil
Package hexutil implements hex encoding with 0x prefix.
Package hexutil implements hex encoding with 0x prefix.
math
Package math provides integer math utilities.
Package math provides integer math utilities.
mclock
package mclock is a wrapper for a monotonic clock source
package mclock is a wrapper for a monotonic clock source
compression
rle
Package rle implements the run-length encoding used for Ethereum data.
Package rle implements the run-length encoding used for Ethereum data.
Package consensus implements different Ethereum consensus engines.
Package consensus implements different Ethereum consensus engines.
clique
Package clique implements the proof-of-authority consensus engine.
Package clique implements the proof-of-authority consensus engine.
ethash
Package ethash implements the ethash proof-of-work consensus engine.
Package ethash implements the ethash proof-of-work consensus engine.
posv
Package posv implements the proof-of-stake-voting consensus engine.
Package posv implements the proof-of-stake-voting consensus engine.
chequebook
Package chequebook package wraps the 'chequebook' Ethereum smart contract.
Package chequebook package wraps the 'chequebook' Ethereum smart contract.
ens
Package core implements the Ethereum consensus protocol.
Package core implements the Ethereum consensus protocol.
asm
Provides support for dealing with EVM assembly instructions (e.g., disassembling them).
Provides support for dealing with EVM assembly instructions (e.g., disassembling them).
bloombits
Package bloombits implements bloom filtering on batches of data.
Package bloombits implements bloom filtering on batches of data.
state
Package state provides a caching layer atop the Ethereum state trie.
Package state provides a caching layer atop the Ethereum state trie.
types
Package types contains data types related to Ethereum consensus.
Package types contains data types related to Ethereum consensus.
vm
Package vm implements the Ethereum Virtual Machine.
Package vm implements the Ethereum Virtual Machine.
vm/runtime
Package runtime provides a basic execution model for executing EVM code.
Package runtime provides a basic execution model for executing EVM code.
bn256
Package bn256 implements the Optimal Ate pairing over a 256-bit Barreto-Naehrig curve.
Package bn256 implements the Optimal Ate pairing over a 256-bit Barreto-Naehrig curve.
bn256/cloudflare
Package bn256 implements a particular bilinear group at the 128-bit security level.
Package bn256 implements a particular bilinear group at the 128-bit security level.
bn256/google
Package bn256 implements a particular bilinear group.
Package bn256 implements a particular bilinear group.
secp256k1
Package secp256k1 wraps the bitcoin secp256k1 C library.
Package secp256k1 wraps the bitcoin secp256k1 C library.
sha3
Package sha3 implements the SHA-3 fixed-output-length hash functions and the SHAKE variable-output-length hash functions defined by FIPS-202.
Package sha3 implements the SHA-3 fixed-output-length hash functions and the SHAKE variable-output-length hash functions defined by FIPS-202.
eth
Package eth implements the Ethereum protocol.
Package eth implements the Ethereum protocol.
downloader
Package downloader contains the manual full chain synchronisation.
Package downloader contains the manual full chain synchronisation.
fetcher
Package fetcher contains the block announcement based synchronisation.
Package fetcher contains the block announcement based synchronisation.
filters
Package filters implements an ethereum filtering system for block, transactions and log events.
Package filters implements an ethereum filtering system for block, transactions and log events.
tracers
Package tracers is a collection of JavaScript transaction tracers.
Package tracers is a collection of JavaScript transaction tracers.
tracers/internal/tracers
Package tracers contains the actual JavaScript tracer assets.
Package tracers contains the actual JavaScript tracer assets.
Package ethclient provides a client for the Ethereum RPC API.
Package ethclient provides a client for the Ethereum RPC API.
Package ethstats implements the network stats reporting service.
Package ethstats implements the network stats reporting service.
Package event deals with subscriptions to real-time events.
Package event deals with subscriptions to real-time events.
filter
Package filter implements event filters.
Package filter implements event filters.
internal
debug
Package debug interfaces Go runtime debugging facilities.
Package debug interfaces Go runtime debugging facilities.
ethapi
Package ethapi implements the general Ethereum API functions.
Package ethapi implements the general Ethereum API functions.
guide
Package guide is a small test suite to ensure snippets in the dev guide work.
Package guide is a small test suite to ensure snippets in the dev guide work.
jsre
Package jsre provides execution environment for JavaScript.
Package jsre provides execution environment for JavaScript.
jsre/deps
Package deps contains the console JavaScript dependencies Go embedded.
Package deps contains the console JavaScript dependencies Go embedded.
web3ext
package web3ext contains geth specific web3.js extensions.
package web3ext contains geth specific web3.js extensions.
les
Package les implements the Light Ethereum Subprotocol.
Package les implements the Light Ethereum Subprotocol.
flowcontrol
Package flowcontrol implements a client side flow control mechanism
Package flowcontrol implements a client side flow control mechanism
Package light implements on-demand retrieval capable state and chain objects for the Ethereum Light Client.
Package light implements on-demand retrieval capable state and chain objects for the Ethereum Light Client.
log
Package log15 provides an opinionated, simple toolkit for best-practice logging that is both human and machine readable.
Package log15 provides an opinionated, simple toolkit for best-practice logging that is both human and machine readable.
Go port of Coda Hale's Metrics library
Go port of Coda Hale's Metrics library
exp
Hook go-metrics into expvar on any /debug/metrics request, load all vars from the registry into expvar, and execute regular expvar handler
Hook go-metrics into expvar on any /debug/metrics request, load all vars from the registry into expvar, and execute regular expvar handler
Package miner implements Ethereum block creation and mining.
Package miner implements Ethereum block creation and mining.
Package geth contains the simplified mobile APIs to go-ethereum.
Package geth contains the simplified mobile APIs to go-ethereum.
Package node sets up multi-protocol Ethereum nodes.
Package node sets up multi-protocol Ethereum nodes.
p2p
Package p2p implements the Ethereum p2p network protocols.
Package p2p implements the Ethereum p2p network protocols.
discover
Package discover implements the Node Discovery Protocol.
Package discover implements the Node Discovery Protocol.
discv5
Package discv5 implements the RLPx v5 Topic Discovery Protocol.
Package discv5 implements the RLPx v5 Topic Discovery Protocol.
enr
Package enr implements Ethereum Node Records as defined in EIP-778.
Package enr implements Ethereum Node Records as defined in EIP-778.
nat
Package nat provides access to common network port mapping protocols.
Package nat provides access to common network port mapping protocols.
netutil
Package netutil contains extensions to the net package.
Package netutil contains extensions to the net package.
protocols
Package protocols is an extension to p2p.
Package protocols is an extension to p2p.
simulations
Package simulations simulates p2p networks.
Package simulations simulates p2p networks.
Package rlp implements the RLP serialization format.
Package rlp implements the RLP serialization format.
Package rpc provides access to the exported methods of an object across a network or other I/O connection.
Package rpc provides access to the exported methods of an object across a network or other I/O connection.
api
api/http
Show nicely (but simple) formatted HTML error pages (or respond with JSON if the appropriate `Accept` header is set)) for the http package.
Show nicely (but simple) formatted HTML error pages (or respond with JSON if the appropriate `Accept` header is set)) for the http package.
Package tests implements execution of Ethereum JSON tests.
Package tests implements execution of Ethereum JSON tests.
Package trie implements Merkle Patricia Tries.
Package trie implements Merkle Patricia Tries.
whisper
whisperv5
Package whisper implements the Whisper protocol (version 5).
Package whisper implements the Whisper protocol (version 5).

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL