utils

package
v1.6.5 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Jun 1, 2017 License: GPL-3.0 Imports: 48 Imported by: 0

Documentation

Overview

Package utils contains internal helper functions for go-ethereum commands.

Package utils contains internal helper functions for go-ethereum commands.

Index

Constants

This section is empty.

Variables

View Source
var (
	// General settings
	DataDirFlag = DirectoryFlag{
		Name:  "datadir",
		Usage: "Data directory for the databases and keystore",
		Value: DirectoryString{node.DefaultDataDir()},
	}
	KeyStoreDirFlag = DirectoryFlag{
		Name:  "keystore",
		Usage: "Directory for the keystore (default = inside the datadir)",
	}
	NoUSBFlag = cli.BoolFlag{
		Name:  "nousb",
		Usage: "Disables monitoring for and managine USB hardware wallets",
	}
	NetworkIdFlag = cli.Uint64Flag{
		Name:  "networkid",
		Usage: "Network identifier (integer, 1=Frontier, 2=Morden (disused), 3=Ropsten, 4=Rinkeby)",
		Value: eth.DefaultConfig.NetworkId,
	}
	TestnetFlag = cli.BoolFlag{
		Name:  "testnet",
		Usage: "Ropsten network: pre-configured proof-of-work test network",
	}
	RinkebyFlag = cli.BoolFlag{
		Name:  "rinkeby",
		Usage: "Rinkeby network: pre-configured proof-of-authority test network",
	}
	DevModeFlag = cli.BoolFlag{
		Name:  "dev",
		Usage: "Developer mode: pre-configured private network with several debugging flags",
	}
	IdentityFlag = cli.StringFlag{
		Name:  "identity",
		Usage: "Custom node name",
	}
	DocRootFlag = DirectoryFlag{
		Name:  "docroot",
		Usage: "Document Root for HTTPClient file scheme",
		Value: DirectoryString{homeDir()},
	}
	FastSyncFlag = cli.BoolFlag{
		Name:  "fast",
		Usage: "Enable fast syncing through state downloads",
	}
	LightModeFlag = cli.BoolFlag{
		Name:  "light",
		Usage: "Enable light client mode",
	}

	SyncModeFlag = TextMarshalerFlag{
		Name:  "syncmode",
		Usage: `Blockchain sync mode ("fast", "full", or "light")`,
		Value: &defaultSyncMode,
	}

	LightServFlag = cli.IntFlag{
		Name:  "lightserv",
		Usage: "Maximum percentage of time allowed for serving LES requests (0-90)",
		Value: 0,
	}
	LightPeersFlag = cli.IntFlag{
		Name:  "lightpeers",
		Usage: "Maximum number of LES client peers",
		Value: 20,
	}
	LightKDFFlag = cli.BoolFlag{
		Name:  "lightkdf",
		Usage: "Reduce key-derivation RAM & CPU usage at some expense of KDF strength",
	}
	// Ethash settings
	EthashCacheDirFlag = DirectoryFlag{
		Name:  "ethash.cachedir",
		Usage: "Directory to store the ethash verification caches (default = inside the datadir)",
	}
	EthashCachesInMemoryFlag = cli.IntFlag{
		Name:  "ethash.cachesinmem",
		Usage: "Number of recent ethash caches to keep in memory (16MB each)",
		Value: eth.DefaultConfig.EthashCachesInMem,
	}
	EthashCachesOnDiskFlag = cli.IntFlag{
		Name:  "ethash.cachesondisk",
		Usage: "Number of recent ethash caches to keep on disk (16MB each)",
		Value: eth.DefaultConfig.EthashCachesOnDisk,
	}
	EthashDatasetDirFlag = DirectoryFlag{
		Name:  "ethash.dagdir",
		Usage: "Directory to store the ethash mining DAGs (default = inside home folder)",
		Value: DirectoryString{eth.DefaultConfig.EthashDatasetDir},
	}
	EthashDatasetsInMemoryFlag = cli.IntFlag{
		Name:  "ethash.dagsinmem",
		Usage: "Number of recent ethash mining DAGs to keep in memory (1+GB each)",
		Value: eth.DefaultConfig.EthashDatasetsInMem,
	}
	EthashDatasetsOnDiskFlag = cli.IntFlag{
		Name:  "ethash.dagsondisk",
		Usage: "Number of recent ethash mining DAGs to keep on disk (1+GB each)",
		Value: eth.DefaultConfig.EthashDatasetsOnDisk,
	}
	// Transaction pool settings
	TxPoolPriceLimitFlag = cli.Uint64Flag{
		Name:  "txpool.pricelimit",
		Usage: "Minimum gas price limit to enforce for acceptance into the pool",
		Value: eth.DefaultConfig.TxPool.PriceLimit,
	}
	TxPoolPriceBumpFlag = cli.Uint64Flag{
		Name:  "txpool.pricebump",
		Usage: "Price bump percentage to replace an already existing transaction",
		Value: eth.DefaultConfig.TxPool.PriceBump,
	}
	TxPoolAccountSlotsFlag = cli.Uint64Flag{
		Name:  "txpool.accountslots",
		Usage: "Minimum number of executable transaction slots guaranteed per account",
		Value: eth.DefaultConfig.TxPool.AccountSlots,
	}
	TxPoolGlobalSlotsFlag = cli.Uint64Flag{
		Name:  "txpool.globalslots",
		Usage: "Maximum number of executable transaction slots for all accounts",
		Value: eth.DefaultConfig.TxPool.GlobalSlots,
	}
	TxPoolAccountQueueFlag = cli.Uint64Flag{
		Name:  "txpool.accountqueue",
		Usage: "Maximum number of non-executable transaction slots permitted per account",
		Value: eth.DefaultConfig.TxPool.AccountQueue,
	}
	TxPoolGlobalQueueFlag = cli.Uint64Flag{
		Name:  "txpool.globalqueue",
		Usage: "Maximum number of non-executable transaction slots for all accounts",
		Value: eth.DefaultConfig.TxPool.GlobalQueue,
	}
	TxPoolLifetimeFlag = cli.DurationFlag{
		Name:  "txpool.lifetime",
		Usage: "Maximum amount of time non-executable transaction are queued",
		Value: eth.DefaultConfig.TxPool.Lifetime,
	}
	// Performance tuning settings
	CacheFlag = cli.IntFlag{
		Name:  "cache",
		Usage: "Megabytes of memory allocated to internal caching (min 16MB / database forced)",
		Value: 128,
	}
	TrieCacheGenFlag = cli.IntFlag{
		Name:  "trie-cache-gens",
		Usage: "Number of trie node generations to keep in memory",
		Value: int(state.MaxTrieCacheGen),
	}
	// Miner settings
	MiningEnabledFlag = cli.BoolFlag{
		Name:  "mine",
		Usage: "Enable mining",
	}
	MinerThreadsFlag = cli.IntFlag{
		Name:  "minerthreads",
		Usage: "Number of CPU threads to use for mining",
		Value: runtime.NumCPU(),
	}
	TargetGasLimitFlag = cli.Uint64Flag{
		Name:  "targetgaslimit",
		Usage: "Target gas limit sets the artificial target gas floor for the blocks to mine",
		Value: params.GenesisGasLimit.Uint64(),
	}
	EtherbaseFlag = cli.StringFlag{
		Name:  "etherbase",
		Usage: "Public address for block mining rewards (default = first account created)",
		Value: "0",
	}
	GasPriceFlag = BigFlag{
		Name:  "gasprice",
		Usage: "Minimal gas price to accept for mining a transactions",
		Value: eth.DefaultConfig.GasPrice,
	}
	ExtraDataFlag = cli.StringFlag{
		Name:  "extradata",
		Usage: "Block extra data set by the miner (default = client version)",
	}
	// Account settings
	UnlockedAccountFlag = cli.StringFlag{
		Name:  "unlock",
		Usage: "Comma separated list of accounts to unlock",
		Value: "",
	}
	PasswordFileFlag = cli.StringFlag{
		Name:  "password",
		Usage: "Password file to use for non-inteactive password input",
		Value: "",
	}

	VMEnableDebugFlag = cli.BoolFlag{
		Name:  "vmdebug",
		Usage: "Record information useful for VM and contract debugging",
	}
	// Logging and debug settings
	EthStatsURLFlag = cli.StringFlag{
		Name:  "ethstats",
		Usage: "Reporting URL of a ethstats service (nodename:secret@host:port)",
	}
	MetricsEnabledFlag = cli.BoolFlag{
		Name:  metrics.MetricsEnabledFlag,
		Usage: "Enable metrics collection and reporting",
	}
	FakePoWFlag = cli.BoolFlag{
		Name:  "fakepow",
		Usage: "Disables proof-of-work verification",
	}
	NoCompactionFlag = cli.BoolFlag{
		Name:  "nocompaction",
		Usage: "Disables db compaction after import",
	}
	// RPC settings
	RPCEnabledFlag = cli.BoolFlag{
		Name:  "rpc",
		Usage: "Enable the HTTP-RPC server",
	}
	RPCListenAddrFlag = cli.StringFlag{
		Name:  "rpcaddr",
		Usage: "HTTP-RPC server listening interface",
		Value: node.DefaultHTTPHost,
	}
	RPCPortFlag = cli.IntFlag{
		Name:  "rpcport",
		Usage: "HTTP-RPC server listening port",
		Value: node.DefaultHTTPPort,
	}
	RPCCORSDomainFlag = cli.StringFlag{
		Name:  "rpccorsdomain",
		Usage: "Comma separated list of domains from which to accept cross origin requests (browser enforced)",
		Value: "",
	}
	RPCApiFlag = cli.StringFlag{
		Name:  "rpcapi",
		Usage: "API's offered over the HTTP-RPC interface",
		Value: "",
	}
	IPCDisabledFlag = cli.BoolFlag{
		Name:  "ipcdisable",
		Usage: "Disable the IPC-RPC server",
	}
	IPCPathFlag = DirectoryFlag{
		Name:  "ipcpath",
		Usage: "Filename for IPC socket/pipe within the datadir (explicit paths escape it)",
	}
	WSEnabledFlag = cli.BoolFlag{
		Name:  "ws",
		Usage: "Enable the WS-RPC server",
	}
	WSListenAddrFlag = cli.StringFlag{
		Name:  "wsaddr",
		Usage: "WS-RPC server listening interface",
		Value: node.DefaultWSHost,
	}
	WSPortFlag = cli.IntFlag{
		Name:  "wsport",
		Usage: "WS-RPC server listening port",
		Value: node.DefaultWSPort,
	}
	WSApiFlag = cli.StringFlag{
		Name:  "wsapi",
		Usage: "API's offered over the WS-RPC interface",
		Value: "",
	}
	WSAllowedOriginsFlag = cli.StringFlag{
		Name:  "wsorigins",
		Usage: "Origins from which to accept websockets requests",
		Value: "",
	}
	ExecFlag = cli.StringFlag{
		Name:  "exec",
		Usage: "Execute JavaScript statement",
	}
	PreloadJSFlag = cli.StringFlag{
		Name:  "preload",
		Usage: "Comma separated list of JavaScript files to preload into the console",
	}

	// Network Settings
	MaxPeersFlag = cli.IntFlag{
		Name:  "maxpeers",
		Usage: "Maximum number of network peers (network disabled if set to 0)",
		Value: 25,
	}
	MaxPendingPeersFlag = cli.IntFlag{
		Name:  "maxpendpeers",
		Usage: "Maximum number of pending connection attempts (defaults used if set to 0)",
		Value: 0,
	}
	ListenPortFlag = cli.IntFlag{
		Name:  "port",
		Usage: "Network listening port",
		Value: 30303,
	}
	BootnodesFlag = cli.StringFlag{
		Name:  "bootnodes",
		Usage: "Comma separated enode URLs for P2P discovery bootstrap (set v4+v5 instead for light servers)",
		Value: "",
	}
	BootnodesV4Flag = cli.StringFlag{
		Name:  "bootnodesv4",
		Usage: "Comma separated enode URLs for P2P v4 discovery bootstrap (light server, full nodes)",
		Value: "",
	}
	BootnodesV5Flag = cli.StringFlag{
		Name:  "bootnodesv5",
		Usage: "Comma separated enode URLs for P2P v5 discovery bootstrap (light server, light nodes)",
		Value: "",
	}
	NodeKeyFileFlag = cli.StringFlag{
		Name:  "nodekey",
		Usage: "P2P node key file",
	}
	NodeKeyHexFlag = cli.StringFlag{
		Name:  "nodekeyhex",
		Usage: "P2P node key as hex (for testing)",
	}
	NATFlag = cli.StringFlag{
		Name:  "nat",
		Usage: "NAT port mapping mechanism (any|none|upnp|pmp|extip:<IP>)",
		Value: "any",
	}
	NoDiscoverFlag = cli.BoolFlag{
		Name:  "nodiscover",
		Usage: "Disables the peer discovery mechanism (manual peer addition)",
	}
	DiscoveryV5Flag = cli.BoolFlag{
		Name:  "v5disc",
		Usage: "Enables the experimental RLPx V5 (Topic Discovery) mechanism",
	}
	NetrestrictFlag = cli.StringFlag{
		Name:  "netrestrict",
		Usage: "Restricts network communication to the given IP networks (CIDR masks)",
	}

	WhisperEnabledFlag = cli.BoolFlag{
		Name:  "shh",
		Usage: "Enable Whisper",
	}

	// ATM the url is left to the user and deployment to
	JSpathFlag = cli.StringFlag{
		Name:  "jspath",
		Usage: "JavaScript root path for `loadScript`",
		Value: ".",
	}

	// Gas price oracle settings
	GpoBlocksFlag = cli.IntFlag{
		Name:  "gpoblocks",
		Usage: "Number of recent blocks to check for gas prices",
		Value: eth.DefaultConfig.GPO.Blocks,
	}
	GpoPercentileFlag = cli.IntFlag{
		Name:  "gpopercentile",
		Usage: "Suggested gas price is the given percentile of a set of recent transaction gas prices",
		Value: eth.DefaultConfig.GPO.Percentile,
	}
)
View Source
var (
	CommandHelpTemplate = `` /* 486-byte string literal not displayed */

)

Functions

func ExportAppendChain added in v0.9.32

func ExportAppendChain(blockchain *core.BlockChain, fn string, first uint64, last uint64) error

func ExportChain added in v0.9.17

func ExportChain(blockchain *core.BlockChain, fn string) error

func Fatalf added in v0.9.17

func Fatalf(format string, args ...interface{})

Fatalf formats a message to standard error and exits the program. The message is also printed to standard output if standard error is redirected to a different file.

func GlobalBig added in v1.6.0

func GlobalBig(ctx *cli.Context, name string) *big.Int

GlobalBig returns the value of a BigFlag from the global flag set.

func ImportChain added in v0.9.17

func ImportChain(chain *core.BlockChain, fn string) error

func MakeAddress added in v1.4.2

func MakeAddress(ks *keystore.KeyStore, account string) (accounts.Account, error)

MakeAddress converts an account specified directly as a hex encoded string or a key index in the key store to an internal account representation.

func MakeChain added in v0.9.26

func MakeChain(ctx *cli.Context, stack *node.Node) (chain *core.BlockChain, chainDb ethdb.Database)

MakeChain creates a chain manager from set command line flags.

func MakeChainDatabase added in v1.4.2

func MakeChainDatabase(ctx *cli.Context, stack *node.Node) ethdb.Database

MakeChainDatabase open an LevelDB using the flags passed to the client and will hard crash if it fails.

func MakeConsolePreloads added in v1.4.6

func MakeConsolePreloads(ctx *cli.Context) []string

MakeConsolePreloads retrieves the absolute paths for the console JavaScript scripts to preload before starting.

func MakeDataDir added in v1.5.1

func MakeDataDir(ctx *cli.Context) string

MakeDataDir retrieves the currently requested data directory, terminating if none (or the empty string) is specified. If the node is starting a testnet, the a subdirectory of the specified datadir will be used.

func MakeGenesis added in v1.6.0

func MakeGenesis(ctx *cli.Context) *core.Genesis

func MakePasswordList added in v1.4.2

func MakePasswordList(ctx *cli.Context) []string

MakePasswordList reads password lines from the file specified by the global --password flag.

func MigrateFlags added in v1.6.4

func MigrateFlags(action func(ctx *cli.Context) error) func(*cli.Context) error

MigrateFlags sets the global flag from a local flag when it's set. This is a temporary function used for migrating old command/flags to the new format.

e.g. geth account new --keystore /tmp/mykeystore --lightkdf

is equivalent after calling this method with:

geth --keystore /tmp/mykeystore --lightkdf account new

This allows the use of the existing configuration functionality. When all flags are migrated this function can be removed and the existing configuration functionality must be changed that is uses local flags

func NewApp added in v0.9.17

func NewApp(gitCommit, usage string) *cli.App

NewApp creates an app with sane defaults.

func RegisterEthService added in v1.5.1

func RegisterEthService(stack *node.Node, cfg *eth.Config)

RegisterEthService adds an Ethereum client to the stack.

func RegisterEthStatsService added in v1.5.5

func RegisterEthStatsService(stack *node.Node, url string)

RegisterEthStatsService configures the Ethereum Stats daemon and adds it to th egiven node.

func RegisterShhService added in v1.5.1

func RegisterShhService(stack *node.Node)

RegisterShhService configures Whisper and adds it to the given node.

func SetEthConfig added in v1.6.0

func SetEthConfig(ctx *cli.Context, stack *node.Node, cfg *eth.Config)

SetEthConfig applies eth-related command line flags to the config.

func SetNodeConfig added in v1.6.0

func SetNodeConfig(ctx *cli.Context, cfg *node.Config)

SetNodeConfig applies node-related command line flags to the config.

func SetP2PConfig added in v1.6.0

func SetP2PConfig(ctx *cli.Context, cfg *p2p.Config)

func SetupNetwork added in v1.3.1

func SetupNetwork(ctx *cli.Context)

SetupNetwork configures the system for either the main net or some test network.

func StartNode added in v1.4.2

func StartNode(stack *node.Node)

Types

type BigFlag added in v1.6.0

type BigFlag struct {
	Name  string
	Value *big.Int
	Usage string
}

BigFlag is a command line flag that accepts 256 bit big integers in decimal or hexadecimal syntax.

func (BigFlag) Apply added in v1.6.0

func (f BigFlag) Apply(set *flag.FlagSet)

func (BigFlag) GetName added in v1.6.0

func (f BigFlag) GetName() string

func (BigFlag) String added in v1.6.0

func (f BigFlag) String() string

type DirectoryFlag added in v0.9.17

type DirectoryFlag struct {
	Name  string
	Value DirectoryString
	Usage string
}

Custom cli.Flag type which expand the received string to an absolute path. e.g. ~/.ethereum -> /home/username/.ethereum

func (DirectoryFlag) Apply added in v0.9.17

func (self DirectoryFlag) Apply(set *flag.FlagSet)

called by cli library, grabs variable from environment (if in env) and adds variable to flag set for parsing.

func (DirectoryFlag) GetName added in v1.5.8

func (self DirectoryFlag) GetName() string

func (*DirectoryFlag) Set added in v0.9.17

func (self *DirectoryFlag) Set(value string)

func (DirectoryFlag) String added in v0.9.17

func (self DirectoryFlag) String() string

type DirectoryString added in v0.9.17

type DirectoryString struct {
	Value string
}

Custom type which is registered in the flags library which cli uses for argument parsing. This allows us to expand Value to an absolute path when the argument is parsed

func (*DirectoryString) Set added in v0.9.17

func (self *DirectoryString) Set(value string) error

func (*DirectoryString) String added in v0.9.17

func (self *DirectoryString) String() string

type TextMarshaler added in v1.6.0

type TextMarshaler interface {
	encoding.TextMarshaler
	encoding.TextUnmarshaler
}

func GlobalTextMarshaler added in v1.6.0

func GlobalTextMarshaler(ctx *cli.Context, name string) TextMarshaler

GlobalTextMarshaler returns the value of a TextMarshalerFlag from the global flag set.

type TextMarshalerFlag added in v1.6.0

type TextMarshalerFlag struct {
	Name  string
	Value TextMarshaler
	Usage string
}

TextMarshalerFlag wraps a TextMarshaler value.

func (TextMarshalerFlag) Apply added in v1.6.0

func (f TextMarshalerFlag) Apply(set *flag.FlagSet)

func (TextMarshalerFlag) GetName added in v1.6.0

func (f TextMarshalerFlag) GetName() string

func (TextMarshalerFlag) String added in v1.6.0

func (f TextMarshalerFlag) String() string

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL