core

Documentation

Overview

Package core contains everything needed to configure and run a 0x Mesh node.

Index

• type App
  • func New(config Config) (*App, error)
  • func (app *App) AddOrders(ctx context.Context, signedOrdersRaw []*json.RawMessage, pinned bool) (*ordervalidator.ValidationResults, error)
  • func (app *App) AddPeer(peerInfo peerstore.PeerInfo) error
  • func (app *App) GetMessagesToShare(max int) ([][]byte, error)
  • func (app *App) GetOrders(page, perPage int, snapshotID string) (*rpc.GetOrdersResponse, error)
  • func (app *App) GetStats() (*rpc.GetStatsResponse, error)
  • func (app *App) HandleMessages(ctx context.Context, messages []*p2p.Message) error
  • func (app *App) Start(ctx context.Context) error
  • func (app *App) SubscribeToOrderEvents(sink chan<- []*zeroex.OrderEvent) event.Subscription
• type Config
• type ErrPerPageZero
  • func (e ErrPerPageZero) Error() string
• type ErrSnapshotNotFound
  • func (e ErrSnapshotNotFound) Error() string

Types

type App

type App struct {
	// contains filtered or unexported fields
}

func New

func New(config Config) (*App, error)

func (*App) AddOrders

func (app *App) AddOrders(ctx context.Context, signedOrdersRaw []*json.RawMessage, pinned bool) (*ordervalidator.ValidationResults, error)

AddOrders can be used to add orders to Mesh. It validates the given orders and if they are valid, will store and eventually broadcast the orders to peers. If pinned is true, the orders will be marked as pinned, which means they will only be removed if they become unfillable and will not be removed due to having a high expiration time or any incentive mechanisms.

func (*App) AddPeer

func (app *App) AddPeer(peerInfo peerstore.PeerInfo) error

AddPeer can be used to manually connect to a new peer.

func (*App) GetMessagesToShare

func (app *App) GetMessagesToShare(max int) ([][]byte, error)

func (*App) GetOrders

func (app *App) GetOrders(page, perPage int, snapshotID string) (*rpc.GetOrdersResponse, error)

GetOrders retrieves paginated orders from the Mesh DB at a specific snapshot in time. Passing an empty string as `snapshotID` creates a new snapshot and returns the first set of results. To fetch all orders, continue to make requests supplying the `snapshotID` returned from the first request. After 1 minute of not received further requests referencing a specific snapshot, the snapshot expires and can no longer be used.

func (*App) GetStats

func (app *App) GetStats() (*rpc.GetStatsResponse, error)

GetStats retrieves stats about the Mesh node

func (*App) HandleMessages

func (app *App) HandleMessages(ctx context.Context, messages []*p2p.Message) error

func (*App) Start

func (app *App) Start(ctx context.Context) error

func (*App) SubscribeToOrderEvents

func (app *App) SubscribeToOrderEvents(sink chan<- []*zeroex.OrderEvent) event.Subscription

SubscribeToOrderEvents let's one subscribe to order events emitted by the OrderWatcher

type Config

type Config struct {
	// Verbosity is the logging verbosity: 0=panic, 1=fatal, 2=error, 3=warn, 4=info, 5=debug 6=trace
	Verbosity int `envvar:"VERBOSITY" default:"2"`
	// DataDir is the directory to use for persisting all data, including the
	// database and private key files.
	DataDir string `envvar:"DATA_DIR" default:"0x_mesh"`
	// P2PTCPPort is the port on which to listen for new TCP connections from
	// peers in the network. Set to 60558 by default.
	P2PTCPPort int `envvar:"P2P_TCP_PORT" default:"60558"`
	// P2PWebSocketsPort is the port on which to listen for new WebSockets
	// connections from peers in the network. Set to 60559 by default.
	P2PWebSocketsPort int `envvar:"P2P_WEBSOCKETS_PORT" default:"60559"`
	// EthereumRPCURL is the URL of an Etheruem node which supports the JSON RPC
	// API.
	EthereumRPCURL string `envvar:"ETHEREUM_RPC_URL" json:"-"`
	// EthereumChainID is the chain ID specifying which Ethereum chain you wish to
	// run your Mesh node for
	EthereumChainID int `envvar:"ETHEREUM_CHAIN_ID"`
	// UseBootstrapList is whether to bootstrap the DHT by connecting to a
	// specific set of peers.
	UseBootstrapList bool `envvar:"USE_BOOTSTRAP_LIST" default:"true"`
	// BootstrapList is a comma-separated list of multiaddresses to use for
	// bootstrapping the DHT (e.g.,
	// "/ip4/3.214.190.67/tcp/60558/ipfs/16Uiu2HAmGx8Z6gdq5T5AQE54GMtqDhDFhizywTy1o28NJbAMMumF").
	// If empty, the default bootstrap list will be used.
	BootstrapList string `envvar:"BOOTSTRAP_LIST" default:""`
	// BlockPollingInterval is the polling interval to wait before checking for a new Ethereum block
	// that might contain transactions that impact the fillability of orders stored by Mesh. Different
	// chains have different block producing intervals: POW chains are typically slower (e.g., Mainnet)
	// and POA chains faster (e.g., Kovan) so one should adjust the polling interval accordingly.
	BlockPollingInterval time.Duration `envvar:"BLOCK_POLLING_INTERVAL" default:"5s"`
	// EthereumRPCMaxContentLength is the maximum request Content-Length accepted by the backing Ethereum RPC
	// endpoint used by Mesh. Geth & Infura both limit a request's content length to 1024 * 512 Bytes. Parity
	// and Alchemy have much higher limits. When batch validating 0x orders, we will fit as many orders into a
	// request without crossing the max content length. The default value is appropriate for operators using Geth
	// or Infura. If using Alchemy or Parity, feel free to double the default max in order to reduce the
	// number of RPC calls made by Mesh.
	EthereumRPCMaxContentLength int `envvar:"ETHEREUM_RPC_MAX_CONTENT_LENGTH" default:"524288"`
	// EnableEthereumRPCRateLimiting determines whether or not Mesh should limit
	// the number of Ethereum RPC requests it sends. It defaults to true.
	// Disabling Ethereum RPC rate limiting can reduce latency for receiving order
	// events in some network conditions, but can also potentially lead to higher
	// costs or other rate limiting issues outside of Mesh, depending on your
	// Ethereum RPC provider. If set to false, ethereumRPCMaxRequestsPer24HrUTC
	// and ethereumRPCMaxRequestsPerSecond will have no effect.
	EnableEthereumRPCRateLimiting bool `envvar:"ENABLE_ETHEREUM_RPC_RATE_LIMITING" default:"true"`
	// EthereumRPCMaxRequestsPer24HrUTC caps the number of Ethereum JSON-RPC requests a Mesh node will make
	// per 24hr UTC time window (time window starts and ends at midnight UTC). It defaults to 200k but
	// can be increased well beyond this limit depending on your infrastructure or Ethereum RPC provider.
	EthereumRPCMaxRequestsPer24HrUTC int `envvar:"ETHEREUM_RPC_MAX_REQUESTS_PER_24_HR_UTC" default:"200000"`
	// EthereumRPCMaxRequestsPerSecond caps the number of Ethereum JSON-RPC requests a Mesh node will make per
	// second. This limits the concurrency of these requests and prevents the Mesh node from getting rate-limited.
	// It defaults to the recommended 30 rps for Infura's free tier, and can be increased to 100 rpc for pro users,
	// and potentially higher on alternative infrastructure.
	EthereumRPCMaxRequestsPerSecond float64 `envvar:"ETHEREUM_RPC_MAX_REQUESTS_PER_SECOND" default:"30"`
	// CustomContractAddresses is a JSON-encoded string representing a set of
	// custom addresses to use for the configured chain ID. The contract
	// addresses for most common chains/networks are already included by default, so this
	// is typically only needed for testing on custom chains/networks. The given
	// addresses are added to the default list of addresses for known chains/networks and
	// overriding any contract addresses for known chains/networks is not allowed. The
	// addresses for exchange, devUtils, erc20Proxy, and erc721Proxy are required
	// for each chain/network. For example:
	//
	//    {
	//        "exchange":"0x48bacb9266a570d521063ef5dd96e61686dbe788",
	//        "devUtils": "0x38ef19fdf8e8415f18c307ed71967e19aac28ba1",
	//        "erc20Proxy": "0x1dc4c1cefef38a777b15aa20260a54e584b16c48",
	//        "erc721Proxy": "0x1d7022f5b17d2f8b695918fb48fa1089c9f85401"
	//    }
	//
	CustomContractAddresses string `envvar:"CUSTOM_CONTRACT_ADDRESSES" default:""`
	// MaxOrdersInStorage is the maximum number of orders that Mesh will keep in
	// storage. As the number of orders in storage grows, Mesh will begin
	// enforcing a limit on maximum expiration time for incoming orders and remove
	// any orders with an expiration time too far in the future.
	MaxOrdersInStorage int `envvar:"MAX_ORDERS_IN_STORAGE" default:"100000"`
}

Config is a set of configuration options for 0x Mesh.

type ErrPerPageZero

type ErrPerPageZero struct{}

ErrPerPageZero is the error returned when a GetOrders request specifies perPage to 0

func (ErrPerPageZero) Error

func (e ErrPerPageZero) Error() string

type ErrSnapshotNotFound

type ErrSnapshotNotFound struct {
	// contains filtered or unexported fields
}

ErrSnapshotNotFound is the error returned when a snapshot not found with a particular id

func (ErrSnapshotNotFound) Error

func (e ErrSnapshotNotFound) Error() string