params

package
v1.17.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jun 25, 2024 License: LGPL-3.0 Imports: 3 Imported by: 0

Documentation

Index

Constants

View Source 
const (
	Wei   = 1
	GWei  = 1e9
	Ether = 1e18
)

These are the multipliers for ether denominations. Example: To get the wei value of an amount in 'gwei', use 

new(big.Int).Mul(value, big.NewInt(params.GWei))
View Source 
const (
	GasLimitBoundDivisor uint64 = 1024    // The bound divisor of the gas limit, used in update calculations.
	MinGasLimit          uint64 = 5000    // Minimum the gas limit may ever be.
	GenesisGasLimit      uint64 = 4712388 // Gas limit of the Genesis block.

	MaximumExtraDataSize  uint64 = 32    // Maximum size extra data may be after Genesis.
	ExpByteGas            uint64 = 10    // Times ceil(log256(exponent)) for the EXP instruction.
	SloadGas              uint64 = 50    // Multiplied by the number of 32-byte words that are copied (round up) for any *COPY operation and added.
	CallValueTransferGas  uint64 = 9000  // Paid for CALL when the value transfer is non-zero.
	CallNewAccountGas     uint64 = 25000 // Paid for CALL when the destination address didn't exist prior.
	TxGas                 uint64 = 21000 // Per transaction not creating a contract. NOTE: Not payable on data of calls between transactions.
	TxGasContractCreation uint64 = 53000 // Per transaction that creates a contract. NOTE: Not payable on data of calls between transactions.
	TxDataZeroGas         uint64 = 4     // Per byte of data attached to a transaction that equals zero. NOTE: Not payable on data of calls between transactions.
	QuadCoeffDiv          uint64 = 512   // Divisor for the quadratic particle of the memory cost equation.
	LogDataGas            uint64 = 8     // Per byte in a LOG* operation's data.
	CallStipend           uint64 = 2300  // Free gas given at beginning of call.

	Sha3Gas     uint64 = 30 // Once per SHA3 operation.
	Sha3WordGas uint64 = 6  // Once per word of the SHA3 operation's data.

	SstoreSetGas    uint64 = 20000 // Once per SLOAD operation.
	SstoreResetGas  uint64 = 5000  // Once per SSTORE operation if the zeroness changes from zero.
	SstoreClearGas  uint64 = 5000  // Once per SSTORE operation if the zeroness doesn't change.
	SstoreRefundGas uint64 = 15000 // Once per SSTORE operation if the zeroness changes to zero.

	NetSstoreNoopGas  uint64 = 200   // Once per SSTORE operation if the value doesn't change.
	NetSstoreInitGas  uint64 = 20000 // Once per SSTORE operation from clean zero.
	NetSstoreCleanGas uint64 = 5000  // Once per SSTORE operation from clean non-zero.
	NetSstoreDirtyGas uint64 = 200   // Once per SSTORE operation from dirty.

	NetSstoreClearRefund      uint64 = 15000 // Once per SSTORE operation for clearing an originally existing storage slot
	NetSstoreResetRefund      uint64 = 4800  // Once per SSTORE operation for resetting to the original non-zero value
	NetSstoreResetClearRefund uint64 = 19800 // Once per SSTORE operation for resetting to the original zero value

	SstoreSentryGasEIP2200            uint64 = 2300  // Minimum gas required to be present for an SSTORE call, not consumed
	SstoreSetGasEIP2200               uint64 = 20000 // Once per SSTORE operation from clean zero to non-zero
	SstoreResetGasEIP2200             uint64 = 5000  // Once per SSTORE operation from clean non-zero to something else
	SstoreClearsScheduleRefundEIP2200 uint64 = 15000 // Once per SSTORE operation for clearing an originally existing storage slot

	JumpdestGas   uint64 = 1     // Once per JUMPDEST operation.
	EpochDuration uint64 = 30000 // Duration between proof-of-work epochs.

	CreateDataGas            uint64 = 200   //
	CallCreateDepth          uint64 = 1024  // Maximum depth of call/create stack.
	ExpGas                   uint64 = 10    // Once per EXP instruction
	LogGas                   uint64 = 375   // Per LOG* operation.
	CopyGas                  uint64 = 3     //
	StackLimit               uint64 = 1024  // Maximum size of VM stack allowed.
	TierStepGas              uint64 = 0     // Once per operation, for a selection of them.
	LogTopicGas              uint64 = 375   // Multiplied by the * of the LOG*, per LOG transaction. e.g. LOG0 incurs 0 * c_txLogTopicGas, LOG4 incurs 4 * c_txLogTopicGas.
	CreateGas                uint64 = 32000 // Once per CREATE operation & contract-creation transaction.
	Create2Gas               uint64 = 32000 // Once per CREATE2 operation
	SelfdestructRefundGas    uint64 = 24000 // Refunded following a selfdestruct operation.
	MemoryGas                uint64 = 3     // Times the address of the (highest referenced byte in memory + 1). NOTE: referencing happens on read, write and in instructions such as RETURN and CALL.
	TxDataNonZeroGasFrontier uint64 = 68    // Per byte of data attached to a transaction that is not equal to zero. NOTE: Not payable on data of calls between transactions.
	TxDataNonZeroGasEIP2028  uint64 = 16    // Per byte of non zero data attached to a transaction after EIP 2028 (part in Istanbul)

	// These have been changed during the course of the chain
	CallGasFrontier              uint64 = 40  // Once per CALL operation & message call transaction.
	CallGasEIP150                uint64 = 700 // Static portion of gas for CALL-derivates after EIP 150 (Tangerine)
	BalanceGasFrontier           uint64 = 20  // The cost of a BALANCE operation
	BalanceGasEIP150             uint64 = 400 // The cost of a BALANCE operation after Tangerine
	BalanceGasEIP1884            uint64 = 700 // The cost of a BALANCE operation after EIP 1884 (part of Istanbul)
	ExtcodeSizeGasFrontier       uint64 = 20  // Cost of EXTCODESIZE before EIP 150 (Tangerine)
	ExtcodeSizeGasEIP150         uint64 = 700 // Cost of EXTCODESIZE after EIP 150 (Tangerine)
	SloadGasFrontier             uint64 = 50
	SloadGasEIP150               uint64 = 200
	SloadGasEIP1884              uint64 = 800  // Cost of SLOAD after EIP 1884 (part of Istanbul)
	SloadGasEIP2200              uint64 = 800  // Cost of SLOAD after EIP 2200 (part of Istanbul)
	ExtcodeHashGasConstantinople uint64 = 400  // Cost of EXTCODEHASH (introduced in Constantinople)
	ExtcodeHashGasEIP1884        uint64 = 700  // Cost of EXTCODEHASH after EIP 1884 (part in Istanbul)
	SelfdestructGasEIP150        uint64 = 5000 // Cost of SELFDESTRUCT post EIP 150 (Tangerine)

	// EXP has a dynamic portion depending on the size of the exponent
	ExpByteFrontier uint64 = 10 // was set to 10 in Frontier
	ExpByteEIP158   uint64 = 50 // was raised to 50 during Eip158 (Spurious Dragon)

	// Extcodecopy has a dynamic AND a static cost. This represents only the
	// static portion of the gas. It was changed during EIP 150 (Tangerine)
	ExtcodeCopyBaseFrontier uint64 = 20
	ExtcodeCopyBaseEIP150   uint64 = 700

	// CreateBySelfdestructGas is used when the refunded account is one that does
	// not exist. This logic is similar to call.
	// Introduced in Tangerine Whistle (Eip 150)
	CreateBySelfdestructGas uint64 = 25000

	MaxCodeSize = 24576 // Maximum bytecode to permit for a contract

	EcrecoverGas        uint64 = 3000 // Elliptic curve sender recovery gas price
	Sha256BaseGas       uint64 = 60   // Base price for a SHA256 operation
	Sha256PerWordGas    uint64 = 12   // Per-word price for a SHA256 operation
	Ripemd160BaseGas    uint64 = 600  // Base price for a RIPEMD160 operation
	Ripemd160PerWordGas uint64 = 120  // Per-word price for a RIPEMD160 operation
	IdentityBaseGas     uint64 = 15   // Base price for a data copy operation
	IdentityPerWordGas  uint64 = 3    // Per-work price for a data copy operation

	Bn256AddGasByzantium             uint64 = 500    // Byzantium gas needed for an elliptic curve addition
	Bn256AddGasIstanbul              uint64 = 150    // Gas needed for an elliptic curve addition
	Bn256ScalarMulGasByzantium       uint64 = 40000  // Byzantium gas needed for an elliptic curve scalar multiplication
	Bn256ScalarMulGasIstanbul        uint64 = 6000   // Gas needed for an elliptic curve scalar multiplication
	Bn256PairingBaseGasByzantium     uint64 = 100000 // Byzantium base price for an elliptic curve pairing check
	Bn256PairingBaseGasIstanbul      uint64 = 45000  // Base price for an elliptic curve pairing check
	Bn256PairingPerPointGasByzantium uint64 = 80000  // Byzantium per-point price for an elliptic curve pairing check
	Bn256PairingPerPointGasIstanbul  uint64 = 34000  // Per-point price for an elliptic curve pairing check

	Bls12381G1AddGas          uint64 = 600    // Price for BLS12-381 elliptic curve G1 point addition
	Bls12381G1MulGas          uint64 = 12000  // Price for BLS12-381 elliptic curve G1 point scalar multiplication
	Bls12381G2AddGas          uint64 = 4500   // Price for BLS12-381 elliptic curve G2 point addition
	Bls12381G2MulGas          uint64 = 55000  // Price for BLS12-381 elliptic curve G2 point scalar multiplication
	Bls12381PairingBaseGas    uint64 = 115000 // Base gas price for BLS12-381 elliptic curve pairing check
	Bls12381PairingPerPairGas uint64 = 23000  // Per-point pair gas price for BLS12-381 elliptic curve pairing check
	Bls12381MapG1Gas          uint64 = 5500   // Gas price for BLS12-381 mapping field element to G1 operation
	Bls12381MapG2Gas          uint64 = 110000 // Gas price for BLS12-381 mapping field element to G2 operation
)

Variables

View Source 
var (
	// MainnetChainConfig is the chain parameters to run a node on the main network.
	MainnetChainConfig = &ChainConfig{
		ChainID:             big.NewInt(constants.EIP155_CHAINID_MAINNET),
		HomesteadBlock:      big.NewInt(0),
		DAOForkBlock:        nil,
		DAOForkSupport:      true,
		EIP150Block:         big.NewInt(0),
		EIP155Block:         big.NewInt(0),
		EIP158Block:         big.NewInt(0),
		ByzantiumBlock:      big.NewInt(0),
		ConstantinopleBlock: big.NewInt(0),
		PetersburgBlock:     big.NewInt(0),
		IstanbulBlock:       big.NewInt(0),
		MuirGlacierBlock:    big.NewInt(0),
	}

	// AllEthashProtocolChanges contains every protocol change (EIPs) introduced
	// and accepted by the Ethereum core developers into the Ethash consensus.
	//
	// This configuration is intentionally not using keyed fields to force anyone
	// adding flags to the config to also have to set these fields.
	AllEthashProtocolChanges = &ChainConfig{big.NewInt(1337), big.NewInt(0), nil, false, big.NewInt(0), big.NewInt(0), big.NewInt(0), big.NewInt(0), big.NewInt(0), big.NewInt(0), big.NewInt(0), nil, nil}

	TestChainConfig = &ChainConfig{big.NewInt(1), big.NewInt(0), nil, false, big.NewInt(0), big.NewInt(0), big.NewInt(0), big.NewInt(0), big.NewInt(0), big.NewInt(0), big.NewInt(0), nil, nil}
	TestRules       = TestChainConfig.Rules(new(big.Int))
)
View Source 
var (
	DifficultyBoundDivisor = big.NewInt(2048)   // The bound divisor of the difficulty, used in the update calculations.
	GenesisDifficulty      = big.NewInt(131072) // Difficulty of the Genesis block.
	MinimumDifficulty      = big.NewInt(131072) // The minimum that the difficulty may ever be.
	DurationLimit          = big.NewInt(13)     // The decision boundary on the blocktime duration used to determine whether difficulty should go up or not.
)
View Source 
var Bls12381MultiExpDiscountTable = [128]uint64{} /* 128 elements not displayed */

Gas discount table for BLS12-381 G1 and G2 multi exponentiation operations

Functions

This section is empty.

Types

type ChainConfig 

type ChainConfig struct {
	ChainID *big.Int `json:"chainId"` // chainId identifies the current chain and is used for replay protection

	HomesteadBlock *big.Int `json:"homesteadBlock,omitempty"` // Homestead switch block (nil = no fork, 0 = already homestead)

	DAOForkBlock   *big.Int `json:"daoForkBlock,omitempty"`   // TheDAO hard-fork switch block (nil = no fork)
	DAOForkSupport bool     `json:"daoForkSupport,omitempty"` // Whether the nodes supports or opposes the DAO hard-fork

	// EIP150 implements the Gas price changes (https://github.com/ethereum/EIPs/issues/150)
	EIP150Block *big.Int `json:"eip150Block,omitempty"` // EIP150 HF block (nil = no fork)

	EIP155Block *big.Int `json:"eip155Block,omitempty"` // EIP155 HF block
	EIP158Block *big.Int `json:"eip158Block,omitempty"` // EIP158 HF block

	ByzantiumBlock      *big.Int `json:"byzantiumBlock,omitempty"`      // Byzantium switch block (nil = no fork, 0 = already on byzantium)
	ConstantinopleBlock *big.Int `json:"constantinopleBlock,omitempty"` // Constantinople switch block (nil = no fork, 0 = already activated)
	PetersburgBlock     *big.Int `json:"petersburgBlock,omitempty"`     // Petersburg switch block (nil = same as Constantinople)
	IstanbulBlock       *big.Int `json:"istanbulBlock,omitempty"`       // Istanbul switch block (nil = no fork, 0 = already on istanbul)
	MuirGlacierBlock    *big.Int `json:"muirGlacierBlock,omitempty"`    // Eip-2384 (bomb delay) switch block (nil = no fork, 0 = already activated)

	YoloV2Block *big.Int `json:"yoloV2Block,omitempty"` // YOLO v2: Gas repricings TODO @holiman add EIP references
}

ChainConfig is the core config which determines the blockchain settings.

ChainConfig is stored in the database on a per block basis. This means that any network, identified by its genesis block, can have its own set of configuration options.

func GetChainConfig 

func GetChainConfig(chainId uint32) *ChainConfig

func (*ChainConfig) CheckCompatible 

func (c *ChainConfig) CheckCompatible(newcfg *ChainConfig, height uint64) *ConfigCompatError

CheckCompatible checks whether scheduled fork transitions have been imported with a mismatching chain configuration.

func (*ChainConfig) CheckConfigForkOrder 

func (c *ChainConfig) CheckConfigForkOrder() error

CheckConfigForkOrder checks that we don't "skip" any forks, geth isn't pluggable enough to guarantee that forks can be implemented in a different order than on official networks

func (*ChainConfig) IsByzantium 

func (c *ChainConfig) IsByzantium(num *big.Int) bool

IsByzantium returns whether num is either equal to the Byzantium fork block or greater.

func (*ChainConfig) IsConstantinople 

func (c *ChainConfig) IsConstantinople(num *big.Int) bool

IsConstantinople returns whether num is either equal to the Constantinople fork block or greater.

func (*ChainConfig) IsDAOFork 

func (c *ChainConfig) IsDAOFork(num *big.Int) bool

IsDAOFork returns whether num is either equal to the DAO fork block or greater.

func (*ChainConfig) IsEIP150 

func (c *ChainConfig) IsEIP150(num *big.Int) bool

IsEIP150 returns whether num is either equal to the EIP150 fork block or greater.

func (*ChainConfig) IsEIP155 

func (c *ChainConfig) IsEIP155(num *big.Int) bool

IsEIP155 returns whether num is either equal to the EIP155 fork block or greater.

func (*ChainConfig) IsEIP158 

func (c *ChainConfig) IsEIP158(num *big.Int) bool

IsEIP158 returns whether num is either equal to the EIP158 fork block or greater.

func (*ChainConfig) IsHomestead 

func (c *ChainConfig) IsHomestead(num *big.Int) bool

IsHomestead returns whether num is either equal to the homestead block or greater.

func (*ChainConfig) IsIstanbul 

func (c *ChainConfig) IsIstanbul(num *big.Int) bool

IsIstanbul returns whether num is either equal to the Istanbul fork block or greater.

func (*ChainConfig) IsMuirGlacier 

func (c *ChainConfig) IsMuirGlacier(num *big.Int) bool

IsMuirGlacier returns whether num is either equal to the Muir Glacier (EIP-2384) fork block or greater.

func (*ChainConfig) IsPetersburg 

func (c *ChainConfig) IsPetersburg(num *big.Int) bool

IsPetersburg returns whether num is either - equal to or greater than the PetersburgBlock fork block, - OR is nil, and Constantinople is active

func (*ChainConfig) IsYoloV2 

func (c *ChainConfig) IsYoloV2(num *big.Int) bool

IsYoloV2 returns whether num is either equal to the YoloV1 fork block or greater.

func (*ChainConfig) Rules 

func (c *ChainConfig) Rules(num *big.Int) Rules

Rules ensures c's ChainID is not nil.

func (*ChainConfig) String 

func (c *ChainConfig) String() string

String implements the fmt.Stringer interface.

type ConfigCompatError 

type ConfigCompatError struct {
	What string
	// block numbers of the stored and new configurations
	StoredConfig, NewConfig *big.Int
	// the block number to which the local chain must be rewound to correct the error
	RewindTo uint64
}

ConfigCompatError is raised if the locally-stored blockchain is initialised with a ChainConfig that would alter the past.

func (*ConfigCompatError) Error 

func (err *ConfigCompatError) Error() string

type Rules 

type Rules struct {
	ChainID                                                 *big.Int
	IsHomestead, IsEIP150, IsEIP155, IsEIP158               bool
	IsByzantium, IsConstantinople, IsPetersburg, IsIstanbul bool
	IsYoloV2                                                bool
}

Rules wraps ChainConfig and is merely syntactic sugar or can be used for functions that do not have or require information about the block.

Rules is a one time interface meaning that it shouldn't be used in between transition phases.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.