storage

package
v0.40.5 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Dec 1, 2022 License: Apache-2.0 Imports: 20 Imported by: 1,510

Documentation

Index

Constants

This section is empty.

Variables

View Source 
var (
	ErrNotFound = errors.New("not found")
	// ErrOutOfOrderSample is when out of order support is disabled and the sample is out of order.
	ErrOutOfOrderSample = errors.New("out of order sample")
	// ErrOutOfBounds is when out of order support is disabled and the sample is older than the min valid time for the append.
	ErrOutOfBounds = errors.New("out of bounds")
	// ErrTooOldSample is when out of order support is enabled but the sample is outside the time window allowed.
	ErrTooOldSample = errors.New("too old sample")
	// ErrDuplicateSampleForTimestamp is when the sample has same timestamp but different value.
	ErrDuplicateSampleForTimestamp   = errors.New("duplicate sample for timestamp")
	ErrOutOfOrderExemplar            = errors.New("out of order exemplar")
	ErrDuplicateExemplar             = errors.New("duplicate exemplar")
	ErrExemplarLabelLength           = fmt.Errorf("label length for exemplar exceeds maximum of %d UTF-8 characters", exemplar.ExemplarMaxLabelSetLength)
	ErrExemplarsDisabled             = fmt.Errorf("exemplar storage is disabled or max exemplars is less than or equal to 0")
	ErrNativeHistogramsDisabled      = fmt.Errorf("native histograms are disabled")
	ErrHistogramCountNotBigEnough    = errors.New("histogram's observation count should be at least the number of observations found in the buckets")
	ErrHistogramNegativeBucketCount  = errors.New("histogram has a bucket whose observation count is negative")
	ErrHistogramSpanNegativeOffset   = errors.New("histogram has a span whose offset is negative")
	ErrHistogramSpansBucketsMismatch = errors.New("histogram spans specify different number of buckets than provided")
)

The errors exposed.

Functions

func ExpandChunks 

func ExpandChunks(iter chunks.Iterator) ([]chunks.Meta, error)

ExpandChunks iterates over all chunks in the iterator, buffering all in slice.

func ExpandSamples 

func ExpandSamples(iter chunkenc.Iterator, newSampleFn func(t int64, v float64, h *histogram.Histogram, fh *histogram.FloatHistogram) tsdbutil.Sample) ([]tsdbutil.Sample, error)

ExpandSamples iterates over all samples in the iterator, buffering all in slice. Optionally it takes samples constructor, useful when you want to compare sample slices with different sample implementations. if nil, sample type from this package will be used.

func NewChainSampleIterator 

func NewChainSampleIterator(iterators []chunkenc.Iterator) chunkenc.Iterator

NewChainSampleIterator returns a single iterator that iterates over the samples from the given iterators in a sorted fashion. If samples overlap, one sample from overlapped ones is kept (randomly) and all others with the same timestamp are dropped.

func NewListChunkSeriesIterator 

func NewListChunkSeriesIterator(chks ...chunks.Meta) chunks.Iterator

NewListChunkSeriesIterator returns listChunkSeriesIterator that allows to iterate over provided chunks.

func NewListSeriesIterator 

func NewListSeriesIterator(samples Samples) chunkenc.Iterator

NewListSeriesIterator returns listSeriesIterator that allows to iterate over provided samples.

Types

type Appendable 

type Appendable interface {
	// Appender returns a new appender for the storage. The implementation
	// can choose whether or not to use the context, for deadlines or to check
	// for errors.
	Appender(ctx context.Context) Appender
}

Appendable allows creating appenders.

type Appender 

type Appender interface {
	// Append adds a sample pair for the given series.
	// An optional series reference can be provided to accelerate calls.
	// A series reference number is returned which can be used to add further
	// samples to the given series in the same or later transactions.
	// Returned reference numbers are ephemeral and may be rejected in calls
	// to Append() at any point. Adding the sample via Append() returns a new
	// reference number.
	// If the reference is 0 it must not be used for caching.
	Append(ref SeriesRef, l labels.Labels, t int64, v float64) (SeriesRef, error)

	// Commit submits the collected samples and purges the batch. If Commit
	// returns a non-nil error, it also rolls back all modifications made in
	// the appender so far, as Rollback would do. In any case, an Appender
	// must not be used anymore after Commit has been called.
	Commit() error

	// Rollback rolls back all modifications made in the appender so far.
	// Appender has to be discarded after rollback.
	Rollback() error

	ExemplarAppender
	HistogramAppender
	MetadataUpdater
}

Appender provides batched appends against a storage. It must be completed with a call to Commit or Rollback and must not be reused afterwards.

Operations on the Appender interface are not goroutine-safe.

The type of samples (float64, histogram, etc) appended for a given series must remain same within an Appender. The behaviour is undefined if samples of different types are appended to the same series in a single Commit().

type BufferedSeriesIterator 

type BufferedSeriesIterator struct {
	// contains filtered or unexported fields
}

BufferedSeriesIterator wraps an iterator with a look-back buffer.

func NewBuffer 

func NewBuffer(delta int64) *BufferedSeriesIterator

NewBuffer returns a new iterator that buffers the values within the time range of the current element and the duration of delta before, initialized with an empty iterator. Use Reset() to set an actual iterator to be buffered.

func NewBufferIterator 

func NewBufferIterator(it chunkenc.Iterator, delta int64) *BufferedSeriesIterator

NewBufferIterator returns a new iterator that buffers the values within the time range of the current element and the duration of delta before.

func (*BufferedSeriesIterator) At 

func (b *BufferedSeriesIterator) At() (int64, float64)

At returns the current float element of the iterator.

func (*BufferedSeriesIterator) AtFloatHistogram added in v0.40.0 

func (b *BufferedSeriesIterator) AtFloatHistogram() (int64, *histogram.FloatHistogram)

AtFloatHistogram returns the current float-histogram element of the iterator.

func (*BufferedSeriesIterator) AtHistogram added in v0.40.0 

func (b *BufferedSeriesIterator) AtHistogram() (int64, *histogram.Histogram)

AtHistogram returns the current histogram element of the iterator.

func (*BufferedSeriesIterator) AtT added in v0.40.0 

func (b *BufferedSeriesIterator) AtT() int64

AtT returns the current timestamp of the iterator.

func (*BufferedSeriesIterator) Buffer 

func (b *BufferedSeriesIterator) Buffer() chunkenc.Iterator

Buffer returns an iterator over the buffered data. Invalidates previously returned iterators.

func (*BufferedSeriesIterator) Err 

func (b *BufferedSeriesIterator) Err() error

Err returns the last encountered error.

func (*BufferedSeriesIterator) Next 

func (b *BufferedSeriesIterator) Next() chunkenc.ValueType

Next advances the iterator to the next element.

func (*BufferedSeriesIterator) PeekBack 

func (b *BufferedSeriesIterator) PeekBack(n int) (t int64, v float64, h *histogram.Histogram, ok bool)

PeekBack returns the nth previous element of the iterator. If there is none buffered, ok is false.

func (*BufferedSeriesIterator) ReduceDelta 

func (b *BufferedSeriesIterator) ReduceDelta(delta int64) bool

ReduceDelta lowers the buffered time delta, for the current SeriesIterator only.

func (*BufferedSeriesIterator) Reset 

func (b *BufferedSeriesIterator) Reset(it chunkenc.Iterator)

Reset re-uses the buffer with a new iterator, resetting the buffered time delta to its original value.

func (*BufferedSeriesIterator) Seek 

func (b *BufferedSeriesIterator) Seek(t int64) chunkenc.ValueType

Seek advances the iterator to the element at time t or greater.

type ChunkIterable 

type ChunkIterable interface {
	// Iterator returns a new, independent iterator that iterates over potentially overlapping
	// chunks of the series, sorted by min time.
	Iterator() chunks.Iterator
}

type ChunkQuerier 

type ChunkQuerier interface {
	LabelQuerier

	// Select returns a set of series that matches the given label matchers.
	// Caller can specify if it requires returned series to be sorted. Prefer not requiring sorting for better performance.
	// It allows passing hints that can help in optimising select, but it's up to implementation how this is used if used at all.
	Select(sortSeries bool, hints *SelectHints, matchers ...*labels.Matcher) ChunkSeriesSet
}

ChunkQuerier provides querying access over time series data of a fixed time range.

func NewMergeChunkQuerier 

func NewMergeChunkQuerier(primaries, secondaries []ChunkQuerier, mergeFn VerticalChunkSeriesMergeFunc) ChunkQuerier

NewMergeChunkQuerier returns a new Chunk Querier that merges results of given primary and secondary chunk queriers. See NewFanout commentary to learn more about primary vs secondary differences.

In case of overlaps between the data given by primaries' and secondaries' Selects, merge function will be used. TODO(bwplotka): Currently merge will compact overlapping chunks with bigger chunk, without limit. Split it: https://github.com/prometheus/tsdb/issues/670

func NoopChunkedQuerier 

func NoopChunkedQuerier() ChunkQuerier

NoopChunkedQuerier is a ChunkQuerier that does nothing.

type ChunkQueryable 

type ChunkQueryable interface {
	// ChunkQuerier returns a new ChunkQuerier on the storage.
	ChunkQuerier(ctx context.Context, mint, maxt int64) (ChunkQuerier, error)
}

A ChunkQueryable handles queries against a storage. Use it when you need to have access to samples in encoded format.

type ChunkSeries 

type ChunkSeries interface {
	Labels
	ChunkIterable
}

ChunkSeries exposes a single time series and allows iterating over chunks.

func NewSeriesToChunkEncoder 

func NewSeriesToChunkEncoder(series Series) ChunkSeries

NewSeriesToChunkEncoder encodes samples to chunks with 120 samples limit.

type ChunkSeriesEntry 

type ChunkSeriesEntry struct {
	Lset            labels.Labels
	ChunkIteratorFn func() chunks.Iterator
}

func NewListChunkSeriesFromSamples 

func NewListChunkSeriesFromSamples(lset labels.Labels, samples ...[]tsdbutil.Sample) *ChunkSeriesEntry

NewListChunkSeriesFromSamples returns chunk series entry that allows to iterate over provided samples. NOTE: It uses inefficient chunks encoding implementation, not caring about chunk size.

func (*ChunkSeriesEntry) Iterator 

func (s *ChunkSeriesEntry) Iterator() chunks.Iterator

func (*ChunkSeriesEntry) Labels 

func (s *ChunkSeriesEntry) Labels() labels.Labels

type ChunkSeriesSet 

type ChunkSeriesSet interface {
	Next() bool
	// At returns full chunk series. Returned series should be iterable even after Next is called.
	At() ChunkSeries
	// The error that iteration has failed with.
	// When an error occurs, set cannot continue to iterate.
	Err() error
	// A collection of warnings for the whole set.
	// Warnings could be return even iteration has not failed with error.
	Warnings() Warnings
}

ChunkSeriesSet contains a set of chunked series.

func EmptyChunkSeriesSet 

func EmptyChunkSeriesSet() ChunkSeriesSet

EmptyChunkSeriesSet returns a chunk series set that's always empty.

func ErrChunkSeriesSet 

func ErrChunkSeriesSet(err error) ChunkSeriesSet

ErrChunkSeriesSet returns a chunk series set that wraps an error.

func NewMergeChunkSeriesSet 

func NewMergeChunkSeriesSet(sets []ChunkSeriesSet, mergeFunc VerticalChunkSeriesMergeFunc) ChunkSeriesSet

NewMergeChunkSeriesSet returns a new ChunkSeriesSet that merges many SeriesSet together.

func NewSeriesSetToChunkSet 

func NewSeriesSetToChunkSet(chk SeriesSet) ChunkSeriesSet

NewSeriesSetToChunkSet converts SeriesSet to ChunkSeriesSet by encoding chunks from samples.

func NoopChunkedSeriesSet 

func NoopChunkedSeriesSet() ChunkSeriesSet

NoopChunkedSeriesSet is a ChunkSeriesSet that does nothing.

type ExemplarAppender 

type ExemplarAppender interface {
	// AppendExemplar adds an exemplar for the given series labels.
	// An optional reference number can be provided to accelerate calls.
	// A reference number is returned which can be used to add further
	// exemplars in the same or later transactions.
	// Returned reference numbers are ephemeral and may be rejected in calls
	// to Append() at any point. Adding the sample via Append() returns a new
	// reference number.
	// If the reference is 0 it must not be used for caching.
	// Note that in our current implementation of Prometheus' exemplar storage
	// calls to Append should generate the reference numbers, AppendExemplar
	// generating a new reference number should be considered possible erroneous behaviour and be logged.
	AppendExemplar(ref SeriesRef, l labels.Labels, e exemplar.Exemplar) (SeriesRef, error)
}

ExemplarAppender provides an interface for adding samples to exemplar storage, which within Prometheus is in-memory only.

type ExemplarQuerier 

type ExemplarQuerier interface {
	// Select all the exemplars that match the matchers.
	// Within a single slice of matchers, it is an intersection. Between the slices, it is a union.
	Select(start, end int64, matchers ...[]*labels.Matcher) ([]exemplar.QueryResult, error)
}

ExemplarQuerier provides reading access to time series data.

type ExemplarQueryable 

type ExemplarQueryable interface {
	// ExemplarQuerier returns a new ExemplarQuerier on the storage.
	ExemplarQuerier(ctx context.Context) (ExemplarQuerier, error)
}

type ExemplarStorage 

type ExemplarStorage interface {
	ExemplarQueryable
	ExemplarAppender
}

ExemplarStorage ingests and manages exemplars, along with various indexes. All methods are goroutine-safe. ExemplarStorage implements storage.ExemplarAppender and storage.ExemplarQuerier.

type GetRef 

type GetRef interface {
	// Returns reference number that can be used to pass to Appender.Append(),
	// and a set of labels that will not cause another copy when passed to Appender.Append().
	// 0 means the appender does not have a reference to this series.
	GetRef(lset labels.Labels) (SeriesRef, labels.Labels)
}

GetRef is an extra interface on Appenders used by downstream projects (e.g. Cortex) to avoid maintaining a parallel set of references.

type HistogramAppender added in v0.40.0 

type HistogramAppender interface {
	// AppendHistogram adds a histogram for the given series labels. An
	// optional reference number can be provided to accelerate calls. A
	// reference number is returned which can be used to add further
	// histograms in the same or later transactions. Returned reference
	// numbers are ephemeral and may be rejected in calls to Append() at any
	// point. Adding the sample via Append() returns a new reference number.
	// If the reference is 0, it must not be used for caching.
	//
	// For efficiency reasons, the histogram is passed as a
	// pointer. AppendHistogram won't mutate the histogram, but in turn
	// depends on the caller to not mutate it either.
	AppendHistogram(ref SeriesRef, l labels.Labels, t int64, h *histogram.Histogram) (SeriesRef, error)
}

HistogramAppender provides an interface for appending histograms to the storage.

type LabelQuerier 

type LabelQuerier interface {
	// LabelValues returns all potential values for a label name.
	// It is not safe to use the strings beyond the lifetime of the querier.
	// If matchers are specified the returned result set is reduced
	// to label values of metrics matching the matchers.
	LabelValues(name string, matchers ...*labels.Matcher) ([]string, Warnings, error)

	// LabelNames returns all the unique label names present in the block in sorted order.
	// If matchers are specified the returned result set is reduced
	// to label names of metrics matching the matchers.
	LabelNames(matchers ...*labels.Matcher) ([]string, Warnings, error)

	// Close releases the resources of the Querier.
	Close() error
}

LabelQuerier provides querying access over labels.

type Labels 

type Labels interface {
	// Labels returns the complete set of labels. For series it means all labels identifying the series.
	Labels() labels.Labels
}

Labels represents an item that has labels e.g. time series.

type MemoizedSeriesIterator 

type MemoizedSeriesIterator struct {
	// contains filtered or unexported fields
}

MemoizedSeriesIterator wraps an iterator with a buffer to look back the previous element.

func NewMemoizedEmptyIterator 

func NewMemoizedEmptyIterator(delta int64) *MemoizedSeriesIterator

NewMemoizedEmptyIterator is like NewMemoizedIterator but it's initialised with an empty iterator.

func NewMemoizedIterator 

func NewMemoizedIterator(it chunkenc.Iterator, delta int64) *MemoizedSeriesIterator

NewMemoizedIterator returns a new iterator that buffers the values within the time range of the current element and the duration of delta before.

func (*MemoizedSeriesIterator) At 

func (b *MemoizedSeriesIterator) At() (int64, float64)

At returns the current float element of the iterator.

func (*MemoizedSeriesIterator) AtFloatHistogram added in v0.40.0 

func (b *MemoizedSeriesIterator) AtFloatHistogram() (int64, *histogram.FloatHistogram)

AtFloatHistogram returns the current float-histogram element of the iterator.

func (*MemoizedSeriesIterator) AtHistogram added in v0.40.0 

func (b *MemoizedSeriesIterator) AtHistogram() (int64, *histogram.Histogram)

AtHistogram returns the current histogram element of the iterator.

func (*MemoizedSeriesIterator) AtT added in v0.40.0 

func (b *MemoizedSeriesIterator) AtT() int64

AtT returns the current timestamp of the iterator.

func (*MemoizedSeriesIterator) Err 

func (b *MemoizedSeriesIterator) Err() error

Err returns the last encountered error.

func (*MemoizedSeriesIterator) Next 

func (b *MemoizedSeriesIterator) Next() chunkenc.ValueType

Next advances the iterator to the next element.

func (*MemoizedSeriesIterator) PeekPrev 

func (b *MemoizedSeriesIterator) PeekPrev() (t int64, v float64, h *histogram.Histogram, fh *histogram.FloatHistogram, ok bool)

PeekPrev returns the previous element of the iterator. If there is none buffered, ok is false.

func (*MemoizedSeriesIterator) Reset 

func (b *MemoizedSeriesIterator) Reset(it chunkenc.Iterator)

Reset the internal state to reuse the wrapper with the provided iterator.

func (*MemoizedSeriesIterator) Seek 

func (b *MemoizedSeriesIterator) Seek(t int64) chunkenc.ValueType

Seek advances the iterator to the element at time t or greater.

type MetadataUpdater added in v0.38.0 

type MetadataUpdater interface {
	// UpdateMetadata updates a metadata entry for the given series and labels.
	// A series reference number is returned which can be used to modify the
	// metadata of the given series in the same or later transactions.
	// Returned reference numbers are ephemeral and may be rejected in calls
	// to UpdateMetadata() at any point. If the series does not exist,
	// UpdateMetadata returns an error.
	// If the reference is 0 it must not be used for caching.
	UpdateMetadata(ref SeriesRef, l labels.Labels, m metadata.Metadata) (SeriesRef, error)
}

MetadataUpdater provides an interface for associating metadata to stored series.

type MockQuerier 

type MockQuerier struct {
	SelectMockFunction func(sortSeries bool, hints *SelectHints, matchers ...*labels.Matcher) SeriesSet
}

MockQuerier is used for test purposes to mock the selected series that is returned.

func (*MockQuerier) Close 

func (q *MockQuerier) Close() error

func (*MockQuerier) LabelNames 

func (q *MockQuerier) LabelNames(matchers ...*labels.Matcher) ([]string, Warnings, error)

func (*MockQuerier) LabelValues 

func (q *MockQuerier) LabelValues(name string, matchers ...*labels.Matcher) ([]string, Warnings, error)

func (*MockQuerier) Select 

func (q *MockQuerier) Select(sortSeries bool, hints *SelectHints, matchers ...*labels.Matcher) SeriesSet

type MockQueryable 

type MockQueryable struct {
	MockQuerier Querier
}

A MockQueryable is used for testing purposes so that a mock Querier can be used.

func (*MockQueryable) Querier 

func (q *MockQueryable) Querier(ctx context.Context, mint, maxt int64) (Querier, error)

type Querier 

type Querier interface {
	LabelQuerier

	// Select returns a set of series that matches the given label matchers.
	// Caller can specify if it requires returned series to be sorted. Prefer not requiring sorting for better performance.
	// It allows passing hints that can help in optimising select, but it's up to implementation how this is used if used at all.
	Select(sortSeries bool, hints *SelectHints, matchers ...*labels.Matcher) SeriesSet
}

Querier provides querying access over time series data of a fixed time range.

func NewMergeQuerier 

func NewMergeQuerier(primaries, secondaries []Querier, mergeFn VerticalSeriesMergeFunc) Querier

NewMergeQuerier returns a new Querier that merges results of given primary and secondary queriers. See NewFanout commentary to learn more about primary vs secondary differences.

In case of overlaps between the data given by primaries' and secondaries' Selects, merge function will be used.

func NoopQuerier 

func NoopQuerier() Querier

NoopQuerier is a Querier that does nothing.

type Queryable 

type Queryable interface {
	// Querier returns a new Querier on the storage.
	Querier(ctx context.Context, mint, maxt int64) (Querier, error)
}

A Queryable handles queries against a storage. Use it when you need to have access to all samples without chunk encoding abstraction e.g promQL.

type QueryableFunc 

type QueryableFunc func(ctx context.Context, mint, maxt int64) (Querier, error)

TODO(bwplotka): Move to promql/engine_test.go? QueryableFunc is an adapter to allow the use of ordinary functions as Queryables. It follows the idea of http.HandlerFunc.

func (QueryableFunc) Querier 

func (f QueryableFunc) Querier(ctx context.Context, mint, maxt int64) (Querier, error)

Querier calls f() with the given parameters.

type SampleAndChunkQueryable 

type SampleAndChunkQueryable interface {
	Queryable
	ChunkQueryable
}

SampleAndChunkQueryable allows retrieving samples as well as encoded samples in form of chunks.

type SampleIterable 

type SampleIterable interface {
	// Iterator returns a new, independent iterator of the data of the series.
	Iterator() chunkenc.Iterator
}

type Samples 

type Samples interface {
	Get(i int) tsdbutil.Sample
	Len() int
}

Samples interface allows to work on arrays of types that are compatible with tsdbutil.Sample.

type SelectHints 

type SelectHints struct {
	Start int64 // Start time in milliseconds for this select.
	End   int64 // End time in milliseconds for this select.

	Step int64  // Query step size in milliseconds.
	Func string // String representation of surrounding function or aggregation.

	Grouping []string // List of label names used in aggregation.
	By       bool     // Indicate whether it is without or by.
	Range    int64    // Range vector selector range in milliseconds.

	// DisableTrimming allows to disable trimming of matching series chunks based on query Start and End time.
	// When disabled, the result may contain samples outside the queried time range but Select() performances
	// may be improved.
	DisableTrimming bool
}

SelectHints specifies hints passed for data selections. This is used only as an option for implementation to use.

type Series 

type Series interface {
	Labels
	SampleIterable
}

Series exposes a single time series and allows iterating over samples.

func ChainedSeriesMerge 

func ChainedSeriesMerge(series ...Series) Series

ChainedSeriesMerge returns single series from many same, potentially overlapping series by chaining samples together. If one or more samples overlap, one sample from random overlapped ones is kept and all others with the same timestamp are dropped.

This works the best with replicated series, where data from two series are exactly the same. This does not work well with "almost" the same data, e.g. from 2 Prometheus HA replicas. This is fine, since from the Prometheus perspective this never happens.

It's optimized for non-overlap cases as well.

func MockSeries 

func MockSeries(timestamps []int64, values []float64, labelSet []string) Series

MockSeries returns a series with custom timestamps, values and labelSet.

type SeriesEntry 

type SeriesEntry struct {
	Lset             labels.Labels
	SampleIteratorFn func() chunkenc.Iterator
}

func NewListSeries 

func NewListSeries(lset labels.Labels, s []tsdbutil.Sample) *SeriesEntry

NewListSeries returns series entry with iterator that allows to iterate over provided samples.

func (*SeriesEntry) Iterator 

func (s *SeriesEntry) Iterator() chunkenc.Iterator

func (*SeriesEntry) Labels 

func (s *SeriesEntry) Labels() labels.Labels

type SeriesRef 

type SeriesRef uint64

SeriesRef is a generic series reference. In prometheus it is either a HeadSeriesRef or BlockSeriesRef, though other implementations may have their own reference types.

type SeriesSet 

type SeriesSet interface {
	Next() bool
	// At returns full series. Returned series should be iterable even after Next is called.
	At() Series
	// The error that iteration as failed with.
	// When an error occurs, set cannot continue to iterate.
	Err() error
	// A collection of warnings for the whole set.
	// Warnings could be return even iteration has not failed with error.
	Warnings() Warnings
}

SeriesSet contains a set of series.

func EmptySeriesSet 

func EmptySeriesSet() SeriesSet

EmptySeriesSet returns a series set that's always empty.

func ErrSeriesSet 

func ErrSeriesSet(err error) SeriesSet

ErrSeriesSet returns a series set that wraps an error.

func NewMergeSeriesSet 

func NewMergeSeriesSet(sets []SeriesSet, mergeFunc VerticalSeriesMergeFunc) SeriesSet

NewMergeSeriesSet returns a new SeriesSet that merges many SeriesSets together.

func NewSeriesSetFromChunkSeriesSet 

func NewSeriesSetFromChunkSeriesSet(chk ChunkSeriesSet) SeriesSet

NewSeriesSetFromChunkSeriesSet converts ChunkSeriesSet to SeriesSet by decoding chunks one by one.

func NoopSeriesSet 

func NoopSeriesSet() SeriesSet

NoopSeriesSet is a SeriesSet that does nothing.

func TestSeriesSet 

func TestSeriesSet(series Series) SeriesSet

TestSeriesSet returns a mock series set

type Storage 

type Storage interface {
	SampleAndChunkQueryable
	Appendable

	// StartTime returns the oldest timestamp stored in the storage.
	StartTime() (int64, error)

	// Close closes the storage and all its underlying resources.
	Close() error
}

Storage ingests and manages samples, along with various indexes. All methods are goroutine-safe. Storage implements storage.Appender.

func NewFanout 

func NewFanout(logger log.Logger, primary Storage, secondaries ...Storage) Storage

NewFanout returns a new fanout Storage, which proxies reads and writes through to multiple underlying storages.

The difference between primary and secondary Storage is only for read (Querier) path and it goes as follows: * If the primary querier returns an error, then any of the Querier operations will fail. * If any secondary querier returns an error the result from that queries is discarded. The overall operation will succeed, and the error from the secondary querier will be returned as a warning.

NOTE: In the case of Prometheus, it treats all remote storages as secondary / best effort.

type VerticalChunkSeriesMergeFunc 

type VerticalChunkSeriesMergeFunc func(...ChunkSeries) ChunkSeries

VerticalChunkSeriesMergeFunc returns merged chunk series implementation that merges potentially time-overlapping chunk series with the same labels into single ChunkSeries.

NOTE: It's up to implementation how series are vertically merged (if chunks are sorted, re-encoded etc).

func NewCompactingChunkSeriesMerger 

func NewCompactingChunkSeriesMerger(mergeFunc VerticalSeriesMergeFunc) VerticalChunkSeriesMergeFunc

NewCompactingChunkSeriesMerger returns VerticalChunkSeriesMergeFunc that merges the same chunk series into single chunk series. In case of the chunk overlaps, it compacts those into one or more time-ordered non-overlapping chunks with merged data. Samples from overlapped chunks are merged using series vertical merge func. It expects the same labels for each given series.

NOTE: Use the returned merge function only when you see potentially overlapping series, as this introduces small a overhead to handle overlaps between series.

func NewConcatenatingChunkSeriesMerger added in v0.39.0 

func NewConcatenatingChunkSeriesMerger() VerticalChunkSeriesMergeFunc

NewConcatenatingChunkSeriesMerger returns a VerticalChunkSeriesMergeFunc that simply concatenates the chunks from the series. The resultant stream of chunks for a series might be overlapping and unsorted.

type VerticalSeriesMergeFunc 

type VerticalSeriesMergeFunc func(...Series) Series

VerticalSeriesMergeFunc returns merged series implementation that merges series with same labels together. It has to handle time-overlapped series as well.

type Warnings 

type Warnings []error

Source Files

View all Source files

Directories

Path Synopsis

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.