ssl

package
v0.0.2 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Mar 24, 2024 License: Apache-2.0 Imports: 6 Imported by: 0

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type Client 

type Client struct {
	pulumi.CustomResourceState

	// Certificate to offer to SSL-VPN server if it requests one.
	Certificate pulumi.StringOutput `pulumi:"certificate"`
	// Traffic class ID.
	ClassId pulumi.IntOutput `pulumi:"classId"`
	// Comment.
	Comment pulumi.StringPtrOutput `pulumi:"comment"`
	// Distance for routes added by SSL-VPN (1 - 255).
	Distance pulumi.IntOutput `pulumi:"distance"`
	// SSL interface to send/receive traffic over.
	Interface pulumi.StringOutput `pulumi:"interface"`
	// IPv4 subnets that the client is protecting.
	Ipv4Subnets pulumi.StringOutput `pulumi:"ipv4Subnets"`
	// IPv6 subnets that the client is protecting.
	Ipv6Subnets pulumi.StringOutput `pulumi:"ipv6Subnets"`
	// SSL-VPN tunnel name.
	Name pulumi.StringOutput `pulumi:"name"`
	// Authenticate peer's certificate with the peer/peergrp.
	Peer pulumi.StringOutput `pulumi:"peer"`
	// SSL-VPN server port.
	Port pulumi.IntOutput `pulumi:"port"`
	// Priority for routes added by SSL-VPN (0 - 4294967295).
	Priority pulumi.IntOutput `pulumi:"priority"`
	// Pre-shared secret to authenticate with the server (ASCII string or hexadecimal encoded with a leading 0x).
	Psk pulumi.StringPtrOutput `pulumi:"psk"`
	// Realm name configured on SSL-VPN server.
	Realm pulumi.StringOutput `pulumi:"realm"`
	// IPv4, IPv6 or DNS address of the SSL-VPN server.
	Server pulumi.StringOutput `pulumi:"server"`
	// IPv4 or IPv6 address to use as a source for the SSL-VPN connection to the server.
	SourceIp pulumi.StringOutput `pulumi:"sourceIp"`
	// Enable/disable this SSL-VPN client configuration. Valid values: `enable`, `disable`.
	Status pulumi.StringOutput `pulumi:"status"`
	// Username to offer to the peer to authenticate the client.
	User pulumi.StringOutput `pulumi:"user"`
	// Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
	Vdomparam pulumi.StringPtrOutput `pulumi:"vdomparam"`
}

client Applies to FortiOS Version `>= 7.0.1`.

## Import

VpnSsl Client can be imported using any of these accepted formats:

```sh $ pulumi import fortios:vpn/ssl/client:Client labelname {{name}} ```

If you do not want to import arguments of block:

$ export "FORTIOS_IMPORT_TABLE"="false"

```sh $ pulumi import fortios:vpn/ssl/client:Client labelname {{name}} ```

$ unset "FORTIOS_IMPORT_TABLE"

func GetClient 

func GetClient(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *ClientState, opts ...pulumi.ResourceOption) (*Client, error)

GetClient gets an existing Client resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewClient 

func NewClient(ctx *pulumi.Context,
	name string, args *ClientArgs, opts ...pulumi.ResourceOption) (*Client, error)

NewClient registers a new resource with the given unique name, arguments, and options.

func (*Client) ElementType 

func (*Client) ElementType() reflect.Type

func (*Client) ToClientOutput 

func (i *Client) ToClientOutput() ClientOutput

func (*Client) ToClientOutputWithContext 

func (i *Client) ToClientOutputWithContext(ctx context.Context) ClientOutput

type ClientArgs 

type ClientArgs struct {
	// Certificate to offer to SSL-VPN server if it requests one.
	Certificate pulumi.StringPtrInput
	// Traffic class ID.
	ClassId pulumi.IntPtrInput
	// Comment.
	Comment pulumi.StringPtrInput
	// Distance for routes added by SSL-VPN (1 - 255).
	Distance pulumi.IntPtrInput
	// SSL interface to send/receive traffic over.
	Interface pulumi.StringPtrInput
	// IPv4 subnets that the client is protecting.
	Ipv4Subnets pulumi.StringPtrInput
	// IPv6 subnets that the client is protecting.
	Ipv6Subnets pulumi.StringPtrInput
	// SSL-VPN tunnel name.
	Name pulumi.StringPtrInput
	// Authenticate peer's certificate with the peer/peergrp.
	Peer pulumi.StringPtrInput
	// SSL-VPN server port.
	Port pulumi.IntPtrInput
	// Priority for routes added by SSL-VPN (0 - 4294967295).
	Priority pulumi.IntPtrInput
	// Pre-shared secret to authenticate with the server (ASCII string or hexadecimal encoded with a leading 0x).
	Psk pulumi.StringPtrInput
	// Realm name configured on SSL-VPN server.
	Realm pulumi.StringPtrInput
	// IPv4, IPv6 or DNS address of the SSL-VPN server.
	Server pulumi.StringPtrInput
	// IPv4 or IPv6 address to use as a source for the SSL-VPN connection to the server.
	SourceIp pulumi.StringPtrInput
	// Enable/disable this SSL-VPN client configuration. Valid values: `enable`, `disable`.
	Status pulumi.StringPtrInput
	// Username to offer to the peer to authenticate the client.
	User pulumi.StringPtrInput
	// Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
	Vdomparam pulumi.StringPtrInput
}

The set of arguments for constructing a Client resource.

func (ClientArgs) ElementType 

func (ClientArgs) ElementType() reflect.Type

type ClientArray 

type ClientArray []ClientInput

func (ClientArray) ElementType 

func (ClientArray) ElementType() reflect.Type

func (ClientArray) ToClientArrayOutput 

func (i ClientArray) ToClientArrayOutput() ClientArrayOutput

func (ClientArray) ToClientArrayOutputWithContext 

func (i ClientArray) ToClientArrayOutputWithContext(ctx context.Context) ClientArrayOutput

type ClientArrayInput 

type ClientArrayInput interface {
	pulumi.Input

	ToClientArrayOutput() ClientArrayOutput
	ToClientArrayOutputWithContext(context.Context) ClientArrayOutput
}

ClientArrayInput is an input type that accepts ClientArray and ClientArrayOutput values. You can construct a concrete instance of `ClientArrayInput` via: 

ClientArray{ ClientArgs{...} }

type ClientArrayOutput 

type ClientArrayOutput struct{ *pulumi.OutputState }

func (ClientArrayOutput) ElementType 

func (ClientArrayOutput) ElementType() reflect.Type

func (ClientArrayOutput) Index 

func (o ClientArrayOutput) Index(i pulumi.IntInput) ClientOutput

func (ClientArrayOutput) ToClientArrayOutput 

func (o ClientArrayOutput) ToClientArrayOutput() ClientArrayOutput

func (ClientArrayOutput) ToClientArrayOutputWithContext 

func (o ClientArrayOutput) ToClientArrayOutputWithContext(ctx context.Context) ClientArrayOutput

type ClientInput 

type ClientInput interface {
	pulumi.Input

	ToClientOutput() ClientOutput
	ToClientOutputWithContext(ctx context.Context) ClientOutput
}

type ClientMap 

type ClientMap map[string]ClientInput

func (ClientMap) ElementType 

func (ClientMap) ElementType() reflect.Type

func (ClientMap) ToClientMapOutput 

func (i ClientMap) ToClientMapOutput() ClientMapOutput

func (ClientMap) ToClientMapOutputWithContext 

func (i ClientMap) ToClientMapOutputWithContext(ctx context.Context) ClientMapOutput

type ClientMapInput 

type ClientMapInput interface {
	pulumi.Input

	ToClientMapOutput() ClientMapOutput
	ToClientMapOutputWithContext(context.Context) ClientMapOutput
}

ClientMapInput is an input type that accepts ClientMap and ClientMapOutput values. You can construct a concrete instance of `ClientMapInput` via: 

ClientMap{ "key": ClientArgs{...} }

type ClientMapOutput 

type ClientMapOutput struct{ *pulumi.OutputState }

func (ClientMapOutput) ElementType 

func (ClientMapOutput) ElementType() reflect.Type

func (ClientMapOutput) MapIndex 

func (o ClientMapOutput) MapIndex(k pulumi.StringInput) ClientOutput

func (ClientMapOutput) ToClientMapOutput 

func (o ClientMapOutput) ToClientMapOutput() ClientMapOutput

func (ClientMapOutput) ToClientMapOutputWithContext 

func (o ClientMapOutput) ToClientMapOutputWithContext(ctx context.Context) ClientMapOutput

type ClientOutput 

type ClientOutput struct{ *pulumi.OutputState }

func (ClientOutput) Certificate 

func (o ClientOutput) Certificate() pulumi.StringOutput

Certificate to offer to SSL-VPN server if it requests one.

func (ClientOutput) ClassId 

func (o ClientOutput) ClassId() pulumi.IntOutput

Traffic class ID.

func (ClientOutput) Comment 

func (o ClientOutput) Comment() pulumi.StringPtrOutput

Comment.

func (ClientOutput) Distance 

func (o ClientOutput) Distance() pulumi.IntOutput

Distance for routes added by SSL-VPN (1 - 255).

func (ClientOutput) ElementType 

func (ClientOutput) ElementType() reflect.Type

func (ClientOutput) Interface 

func (o ClientOutput) Interface() pulumi.StringOutput

SSL interface to send/receive traffic over.

func (ClientOutput) Ipv4Subnets 

func (o ClientOutput) Ipv4Subnets() pulumi.StringOutput

IPv4 subnets that the client is protecting.

func (ClientOutput) Ipv6Subnets 

func (o ClientOutput) Ipv6Subnets() pulumi.StringOutput

IPv6 subnets that the client is protecting.

func (ClientOutput) Name 

func (o ClientOutput) Name() pulumi.StringOutput

SSL-VPN tunnel name.

func (ClientOutput) Peer 

func (o ClientOutput) Peer() pulumi.StringOutput

Authenticate peer's certificate with the peer/peergrp.

func (ClientOutput) Port 

func (o ClientOutput) Port() pulumi.IntOutput

SSL-VPN server port.

func (ClientOutput) Priority 

func (o ClientOutput) Priority() pulumi.IntOutput

Priority for routes added by SSL-VPN (0 - 4294967295).

func (ClientOutput) Psk 

func (o ClientOutput) Psk() pulumi.StringPtrOutput

Pre-shared secret to authenticate with the server (ASCII string or hexadecimal encoded with a leading 0x).

func (ClientOutput) Realm 

func (o ClientOutput) Realm() pulumi.StringOutput

Realm name configured on SSL-VPN server.

func (ClientOutput) Server 

func (o ClientOutput) Server() pulumi.StringOutput

IPv4, IPv6 or DNS address of the SSL-VPN server.

func (ClientOutput) SourceIp 

func (o ClientOutput) SourceIp() pulumi.StringOutput

IPv4 or IPv6 address to use as a source for the SSL-VPN connection to the server.

func (ClientOutput) Status 

func (o ClientOutput) Status() pulumi.StringOutput

Enable/disable this SSL-VPN client configuration. Valid values: `enable`, `disable`.

func (ClientOutput) ToClientOutput 

func (o ClientOutput) ToClientOutput() ClientOutput

func (ClientOutput) ToClientOutputWithContext 

func (o ClientOutput) ToClientOutputWithContext(ctx context.Context) ClientOutput

func (ClientOutput) User 

func (o ClientOutput) User() pulumi.StringOutput

Username to offer to the peer to authenticate the client.

func (ClientOutput) Vdomparam 

func (o ClientOutput) Vdomparam() pulumi.StringPtrOutput

Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

type ClientState 

type ClientState struct {
	// Certificate to offer to SSL-VPN server if it requests one.
	Certificate pulumi.StringPtrInput
	// Traffic class ID.
	ClassId pulumi.IntPtrInput
	// Comment.
	Comment pulumi.StringPtrInput
	// Distance for routes added by SSL-VPN (1 - 255).
	Distance pulumi.IntPtrInput
	// SSL interface to send/receive traffic over.
	Interface pulumi.StringPtrInput
	// IPv4 subnets that the client is protecting.
	Ipv4Subnets pulumi.StringPtrInput
	// IPv6 subnets that the client is protecting.
	Ipv6Subnets pulumi.StringPtrInput
	// SSL-VPN tunnel name.
	Name pulumi.StringPtrInput
	// Authenticate peer's certificate with the peer/peergrp.
	Peer pulumi.StringPtrInput
	// SSL-VPN server port.
	Port pulumi.IntPtrInput
	// Priority for routes added by SSL-VPN (0 - 4294967295).
	Priority pulumi.IntPtrInput
	// Pre-shared secret to authenticate with the server (ASCII string or hexadecimal encoded with a leading 0x).
	Psk pulumi.StringPtrInput
	// Realm name configured on SSL-VPN server.
	Realm pulumi.StringPtrInput
	// IPv4, IPv6 or DNS address of the SSL-VPN server.
	Server pulumi.StringPtrInput
	// IPv4 or IPv6 address to use as a source for the SSL-VPN connection to the server.
	SourceIp pulumi.StringPtrInput
	// Enable/disable this SSL-VPN client configuration. Valid values: `enable`, `disable`.
	Status pulumi.StringPtrInput
	// Username to offer to the peer to authenticate the client.
	User pulumi.StringPtrInput
	// Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
	Vdomparam pulumi.StringPtrInput
}

func (ClientState) ElementType 

func (ClientState) ElementType() reflect.Type

type GetSettingsAuthenticationRule 

type GetSettingsAuthenticationRule struct {
	// SSL VPN authentication method restriction.
	Auth string `pulumi:"auth"`
	// SSL VPN cipher strength.
	Cipher string `pulumi:"cipher"`
	// Enable/disable SSL VPN client certificate restrictive.
	ClientCert string `pulumi:"clientCert"`
	// User groups. The structure of `groups` block is documented below.
	Groups []GetSettingsAuthenticationRuleGroup `pulumi:"groups"`
	// ID (0 - 4294967295).
	Id int `pulumi:"id"`
	// SSL VPN portal.
	Portal string `pulumi:"portal"`
	// SSL VPN realm.
	Realm string `pulumi:"realm"`
	// Enable/disable negated source IPv6 address match.
	SourceAddress6Negate string `pulumi:"sourceAddress6Negate"`
	// IPv6 source address of incoming traffic. The structure of `sourceAddress6` block is documented below.
	SourceAddress6s []GetSettingsAuthenticationRuleSourceAddress6 `pulumi:"sourceAddress6s"`
	// Enable/disable negated source address match.
	SourceAddressNegate string `pulumi:"sourceAddressNegate"`
	// Source address of incoming traffic. The structure of `sourceAddress` block is documented below.
	SourceAddresses []GetSettingsAuthenticationRuleSourceAddress `pulumi:"sourceAddresses"`
	// SSL VPN source interface of incoming traffic. The structure of `sourceInterface` block is documented below.
	SourceInterfaces []GetSettingsAuthenticationRuleSourceInterface `pulumi:"sourceInterfaces"`
	// Name of user peer.
	UserPeer string `pulumi:"userPeer"`
	// User name. The structure of `users` block is documented below.
	Users []GetSettingsAuthenticationRuleUser `pulumi:"users"`
}

type GetSettingsAuthenticationRuleArgs 

type GetSettingsAuthenticationRuleArgs struct {
	// SSL VPN authentication method restriction.
	Auth pulumi.StringInput `pulumi:"auth"`
	// SSL VPN cipher strength.
	Cipher pulumi.StringInput `pulumi:"cipher"`
	// Enable/disable SSL VPN client certificate restrictive.
	ClientCert pulumi.StringInput `pulumi:"clientCert"`
	// User groups. The structure of `groups` block is documented below.
	Groups GetSettingsAuthenticationRuleGroupArrayInput `pulumi:"groups"`
	// ID (0 - 4294967295).
	Id pulumi.IntInput `pulumi:"id"`
	// SSL VPN portal.
	Portal pulumi.StringInput `pulumi:"portal"`
	// SSL VPN realm.
	Realm pulumi.StringInput `pulumi:"realm"`
	// Enable/disable negated source IPv6 address match.
	SourceAddress6Negate pulumi.StringInput `pulumi:"sourceAddress6Negate"`
	// IPv6 source address of incoming traffic. The structure of `sourceAddress6` block is documented below.
	SourceAddress6s GetSettingsAuthenticationRuleSourceAddress6ArrayInput `pulumi:"sourceAddress6s"`
	// Enable/disable negated source address match.
	SourceAddressNegate pulumi.StringInput `pulumi:"sourceAddressNegate"`
	// Source address of incoming traffic. The structure of `sourceAddress` block is documented below.
	SourceAddresses GetSettingsAuthenticationRuleSourceAddressArrayInput `pulumi:"sourceAddresses"`
	// SSL VPN source interface of incoming traffic. The structure of `sourceInterface` block is documented below.
	SourceInterfaces GetSettingsAuthenticationRuleSourceInterfaceArrayInput `pulumi:"sourceInterfaces"`
	// Name of user peer.
	UserPeer pulumi.StringInput `pulumi:"userPeer"`
	// User name. The structure of `users` block is documented below.
	Users GetSettingsAuthenticationRuleUserArrayInput `pulumi:"users"`
}

func (GetSettingsAuthenticationRuleArgs) ElementType 

func (GetSettingsAuthenticationRuleArgs) ElementType() reflect.Type

func (GetSettingsAuthenticationRuleArgs) ToGetSettingsAuthenticationRuleOutput 

func (i GetSettingsAuthenticationRuleArgs) ToGetSettingsAuthenticationRuleOutput() GetSettingsAuthenticationRuleOutput

func (GetSettingsAuthenticationRuleArgs) ToGetSettingsAuthenticationRuleOutputWithContext 

func (i GetSettingsAuthenticationRuleArgs) ToGetSettingsAuthenticationRuleOutputWithContext(ctx context.Context) GetSettingsAuthenticationRuleOutput

type GetSettingsAuthenticationRuleArray 

type GetSettingsAuthenticationRuleArray []GetSettingsAuthenticationRuleInput

func (GetSettingsAuthenticationRuleArray) ElementType 

func (GetSettingsAuthenticationRuleArray) ElementType() reflect.Type

func (GetSettingsAuthenticationRuleArray) ToGetSettingsAuthenticationRuleArrayOutput 

func (i GetSettingsAuthenticationRuleArray) ToGetSettingsAuthenticationRuleArrayOutput() GetSettingsAuthenticationRuleArrayOutput

func (GetSettingsAuthenticationRuleArray) ToGetSettingsAuthenticationRuleArrayOutputWithContext 

func (i GetSettingsAuthenticationRuleArray) ToGetSettingsAuthenticationRuleArrayOutputWithContext(ctx context.Context) GetSettingsAuthenticationRuleArrayOutput

type GetSettingsAuthenticationRuleArrayInput 

type GetSettingsAuthenticationRuleArrayInput interface {
	pulumi.Input

	ToGetSettingsAuthenticationRuleArrayOutput() GetSettingsAuthenticationRuleArrayOutput
	ToGetSettingsAuthenticationRuleArrayOutputWithContext(context.Context) GetSettingsAuthenticationRuleArrayOutput
}

GetSettingsAuthenticationRuleArrayInput is an input type that accepts GetSettingsAuthenticationRuleArray and GetSettingsAuthenticationRuleArrayOutput values. You can construct a concrete instance of `GetSettingsAuthenticationRuleArrayInput` via: 

GetSettingsAuthenticationRuleArray{ GetSettingsAuthenticationRuleArgs{...} }

type GetSettingsAuthenticationRuleArrayOutput 

type GetSettingsAuthenticationRuleArrayOutput struct{ *pulumi.OutputState }

func (GetSettingsAuthenticationRuleArrayOutput) ElementType 

func (GetSettingsAuthenticationRuleArrayOutput) ElementType() reflect.Type

func (GetSettingsAuthenticationRuleArrayOutput) Index 

func (o GetSettingsAuthenticationRuleArrayOutput) Index(i pulumi.IntInput) GetSettingsAuthenticationRuleOutput

func (GetSettingsAuthenticationRuleArrayOutput) ToGetSettingsAuthenticationRuleArrayOutput 

func (o GetSettingsAuthenticationRuleArrayOutput) ToGetSettingsAuthenticationRuleArrayOutput() GetSettingsAuthenticationRuleArrayOutput

func (GetSettingsAuthenticationRuleArrayOutput) ToGetSettingsAuthenticationRuleArrayOutputWithContext 

func (o GetSettingsAuthenticationRuleArrayOutput) ToGetSettingsAuthenticationRuleArrayOutputWithContext(ctx context.Context) GetSettingsAuthenticationRuleArrayOutput

type GetSettingsAuthenticationRuleGroup 

type GetSettingsAuthenticationRuleGroup struct {
	// Group name.
	Name string `pulumi:"name"`
}

type GetSettingsAuthenticationRuleGroupArgs 

type GetSettingsAuthenticationRuleGroupArgs struct {
	// Group name.
	Name pulumi.StringInput `pulumi:"name"`
}

func (GetSettingsAuthenticationRuleGroupArgs) ElementType 

func (GetSettingsAuthenticationRuleGroupArgs) ElementType() reflect.Type

func (GetSettingsAuthenticationRuleGroupArgs) ToGetSettingsAuthenticationRuleGroupOutput 

func (i GetSettingsAuthenticationRuleGroupArgs) ToGetSettingsAuthenticationRuleGroupOutput() GetSettingsAuthenticationRuleGroupOutput

func (GetSettingsAuthenticationRuleGroupArgs) ToGetSettingsAuthenticationRuleGroupOutputWithContext 

func (i GetSettingsAuthenticationRuleGroupArgs) ToGetSettingsAuthenticationRuleGroupOutputWithContext(ctx context.Context) GetSettingsAuthenticationRuleGroupOutput

type GetSettingsAuthenticationRuleGroupArray 

type GetSettingsAuthenticationRuleGroupArray []GetSettingsAuthenticationRuleGroupInput

func (GetSettingsAuthenticationRuleGroupArray) ElementType 

func (GetSettingsAuthenticationRuleGroupArray) ElementType() reflect.Type

func (GetSettingsAuthenticationRuleGroupArray) ToGetSettingsAuthenticationRuleGroupArrayOutput 

func (i GetSettingsAuthenticationRuleGroupArray) ToGetSettingsAuthenticationRuleGroupArrayOutput() GetSettingsAuthenticationRuleGroupArrayOutput

func (GetSettingsAuthenticationRuleGroupArray) ToGetSettingsAuthenticationRuleGroupArrayOutputWithContext 

func (i GetSettingsAuthenticationRuleGroupArray) ToGetSettingsAuthenticationRuleGroupArrayOutputWithContext(ctx context.Context) GetSettingsAuthenticationRuleGroupArrayOutput

type GetSettingsAuthenticationRuleGroupArrayInput 

type GetSettingsAuthenticationRuleGroupArrayInput interface {
	pulumi.Input

	ToGetSettingsAuthenticationRuleGroupArrayOutput() GetSettingsAuthenticationRuleGroupArrayOutput
	ToGetSettingsAuthenticationRuleGroupArrayOutputWithContext(context.Context) GetSettingsAuthenticationRuleGroupArrayOutput
}

GetSettingsAuthenticationRuleGroupArrayInput is an input type that accepts GetSettingsAuthenticationRuleGroupArray and GetSettingsAuthenticationRuleGroupArrayOutput values. You can construct a concrete instance of `GetSettingsAuthenticationRuleGroupArrayInput` via: 

GetSettingsAuthenticationRuleGroupArray{ GetSettingsAuthenticationRuleGroupArgs{...} }

type GetSettingsAuthenticationRuleGroupArrayOutput 

type GetSettingsAuthenticationRuleGroupArrayOutput struct{ *pulumi.OutputState }

func (GetSettingsAuthenticationRuleGroupArrayOutput) ElementType 

func (GetSettingsAuthenticationRuleGroupArrayOutput) ElementType() reflect.Type

func (GetSettingsAuthenticationRuleGroupArrayOutput) Index 

func (o GetSettingsAuthenticationRuleGroupArrayOutput) Index(i pulumi.IntInput) GetSettingsAuthenticationRuleGroupOutput

func (GetSettingsAuthenticationRuleGroupArrayOutput) ToGetSettingsAuthenticationRuleGroupArrayOutput 

func (o GetSettingsAuthenticationRuleGroupArrayOutput) ToGetSettingsAuthenticationRuleGroupArrayOutput() GetSettingsAuthenticationRuleGroupArrayOutput

func (GetSettingsAuthenticationRuleGroupArrayOutput) ToGetSettingsAuthenticationRuleGroupArrayOutputWithContext 

func (o GetSettingsAuthenticationRuleGroupArrayOutput) ToGetSettingsAuthenticationRuleGroupArrayOutputWithContext(ctx context.Context) GetSettingsAuthenticationRuleGroupArrayOutput

type GetSettingsAuthenticationRuleGroupInput 

type GetSettingsAuthenticationRuleGroupInput interface {
	pulumi.Input

	ToGetSettingsAuthenticationRuleGroupOutput() GetSettingsAuthenticationRuleGroupOutput
	ToGetSettingsAuthenticationRuleGroupOutputWithContext(context.Context) GetSettingsAuthenticationRuleGroupOutput
}

GetSettingsAuthenticationRuleGroupInput is an input type that accepts GetSettingsAuthenticationRuleGroupArgs and GetSettingsAuthenticationRuleGroupOutput values. You can construct a concrete instance of `GetSettingsAuthenticationRuleGroupInput` via: 

GetSettingsAuthenticationRuleGroupArgs{...}

type GetSettingsAuthenticationRuleGroupOutput 

type GetSettingsAuthenticationRuleGroupOutput struct{ *pulumi.OutputState }

func (GetSettingsAuthenticationRuleGroupOutput) ElementType 

func (GetSettingsAuthenticationRuleGroupOutput) ElementType() reflect.Type

func (GetSettingsAuthenticationRuleGroupOutput) Name 

func (o GetSettingsAuthenticationRuleGroupOutput) Name() pulumi.StringOutput

Group name.

func (GetSettingsAuthenticationRuleGroupOutput) ToGetSettingsAuthenticationRuleGroupOutput 

func (o GetSettingsAuthenticationRuleGroupOutput) ToGetSettingsAuthenticationRuleGroupOutput() GetSettingsAuthenticationRuleGroupOutput

func (GetSettingsAuthenticationRuleGroupOutput) ToGetSettingsAuthenticationRuleGroupOutputWithContext 

func (o GetSettingsAuthenticationRuleGroupOutput) ToGetSettingsAuthenticationRuleGroupOutputWithContext(ctx context.Context) GetSettingsAuthenticationRuleGroupOutput

type GetSettingsAuthenticationRuleInput 

type GetSettingsAuthenticationRuleInput interface {
	pulumi.Input

	ToGetSettingsAuthenticationRuleOutput() GetSettingsAuthenticationRuleOutput
	ToGetSettingsAuthenticationRuleOutputWithContext(context.Context) GetSettingsAuthenticationRuleOutput
}

GetSettingsAuthenticationRuleInput is an input type that accepts GetSettingsAuthenticationRuleArgs and GetSettingsAuthenticationRuleOutput values. You can construct a concrete instance of `GetSettingsAuthenticationRuleInput` via: 

GetSettingsAuthenticationRuleArgs{...}

type GetSettingsAuthenticationRuleOutput 

type GetSettingsAuthenticationRuleOutput struct{ *pulumi.OutputState }

func (GetSettingsAuthenticationRuleOutput) Auth 

func (o GetSettingsAuthenticationRuleOutput) Auth() pulumi.StringOutput

SSL VPN authentication method restriction.

func (GetSettingsAuthenticationRuleOutput) Cipher 

func (o GetSettingsAuthenticationRuleOutput) Cipher() pulumi.StringOutput

SSL VPN cipher strength.

func (GetSettingsAuthenticationRuleOutput) ClientCert 

func (o GetSettingsAuthenticationRuleOutput) ClientCert() pulumi.StringOutput

Enable/disable SSL VPN client certificate restrictive.

func (GetSettingsAuthenticationRuleOutput) ElementType 

func (GetSettingsAuthenticationRuleOutput) ElementType() reflect.Type

func (GetSettingsAuthenticationRuleOutput) Groups 

func (o GetSettingsAuthenticationRuleOutput) Groups() GetSettingsAuthenticationRuleGroupArrayOutput

User groups. The structure of `groups` block is documented below.

func (GetSettingsAuthenticationRuleOutput) Id 

func (o GetSettingsAuthenticationRuleOutput) Id() pulumi.IntOutput

ID (0 - 4294967295).

func (GetSettingsAuthenticationRuleOutput) Portal 

func (o GetSettingsAuthenticationRuleOutput) Portal() pulumi.StringOutput

SSL VPN portal.

func (GetSettingsAuthenticationRuleOutput) Realm 

func (o GetSettingsAuthenticationRuleOutput) Realm() pulumi.StringOutput

SSL VPN realm.

func (GetSettingsAuthenticationRuleOutput) SourceAddress6Negate 

func (o GetSettingsAuthenticationRuleOutput) SourceAddress6Negate() pulumi.StringOutput

Enable/disable negated source IPv6 address match.

func (GetSettingsAuthenticationRuleOutput) SourceAddress6s 

func (o GetSettingsAuthenticationRuleOutput) SourceAddress6s() GetSettingsAuthenticationRuleSourceAddress6ArrayOutput

IPv6 source address of incoming traffic. The structure of `sourceAddress6` block is documented below.

func (GetSettingsAuthenticationRuleOutput) SourceAddressNegate 

func (o GetSettingsAuthenticationRuleOutput) SourceAddressNegate() pulumi.StringOutput

Enable/disable negated source address match.

func (GetSettingsAuthenticationRuleOutput) SourceAddresses 

func (o GetSettingsAuthenticationRuleOutput) SourceAddresses() GetSettingsAuthenticationRuleSourceAddressArrayOutput

Source address of incoming traffic. The structure of `sourceAddress` block is documented below.

func (GetSettingsAuthenticationRuleOutput) SourceInterfaces 

func (o GetSettingsAuthenticationRuleOutput) SourceInterfaces() GetSettingsAuthenticationRuleSourceInterfaceArrayOutput

SSL VPN source interface of incoming traffic. The structure of `sourceInterface` block is documented below.

func (GetSettingsAuthenticationRuleOutput) ToGetSettingsAuthenticationRuleOutput 

func (o GetSettingsAuthenticationRuleOutput) ToGetSettingsAuthenticationRuleOutput() GetSettingsAuthenticationRuleOutput

func (GetSettingsAuthenticationRuleOutput) ToGetSettingsAuthenticationRuleOutputWithContext 

func (o GetSettingsAuthenticationRuleOutput) ToGetSettingsAuthenticationRuleOutputWithContext(ctx context.Context) GetSettingsAuthenticationRuleOutput

func (GetSettingsAuthenticationRuleOutput) UserPeer 

func (o GetSettingsAuthenticationRuleOutput) UserPeer() pulumi.StringOutput

Name of user peer.

func (GetSettingsAuthenticationRuleOutput) Users 

func (o GetSettingsAuthenticationRuleOutput) Users() GetSettingsAuthenticationRuleUserArrayOutput

User name. The structure of `users` block is documented below.

type GetSettingsAuthenticationRuleSourceAddress 

type GetSettingsAuthenticationRuleSourceAddress struct {
	// Group name.
	Name string `pulumi:"name"`
}

type GetSettingsAuthenticationRuleSourceAddress6 

type GetSettingsAuthenticationRuleSourceAddress6 struct {
	// Group name.
	Name string `pulumi:"name"`
}

type GetSettingsAuthenticationRuleSourceAddress6Args 

type GetSettingsAuthenticationRuleSourceAddress6Args struct {
	// Group name.
	Name pulumi.StringInput `pulumi:"name"`
}

func (GetSettingsAuthenticationRuleSourceAddress6Args) ElementType 

func (GetSettingsAuthenticationRuleSourceAddress6Args) ElementType() reflect.Type

func (GetSettingsAuthenticationRuleSourceAddress6Args) ToGetSettingsAuthenticationRuleSourceAddress6Output 

func (i GetSettingsAuthenticationRuleSourceAddress6Args) ToGetSettingsAuthenticationRuleSourceAddress6Output() GetSettingsAuthenticationRuleSourceAddress6Output

func (GetSettingsAuthenticationRuleSourceAddress6Args) ToGetSettingsAuthenticationRuleSourceAddress6OutputWithContext 

func (i GetSettingsAuthenticationRuleSourceAddress6Args) ToGetSettingsAuthenticationRuleSourceAddress6OutputWithContext(ctx context.Context) GetSettingsAuthenticationRuleSourceAddress6Output

type GetSettingsAuthenticationRuleSourceAddress6Array 

type GetSettingsAuthenticationRuleSourceAddress6Array []GetSettingsAuthenticationRuleSourceAddress6Input

func (GetSettingsAuthenticationRuleSourceAddress6Array) ElementType 

func (GetSettingsAuthenticationRuleSourceAddress6Array) ElementType() reflect.Type

func (GetSettingsAuthenticationRuleSourceAddress6Array) ToGetSettingsAuthenticationRuleSourceAddress6ArrayOutput 

func (i GetSettingsAuthenticationRuleSourceAddress6Array) ToGetSettingsAuthenticationRuleSourceAddress6ArrayOutput() GetSettingsAuthenticationRuleSourceAddress6ArrayOutput

func (GetSettingsAuthenticationRuleSourceAddress6Array) ToGetSettingsAuthenticationRuleSourceAddress6ArrayOutputWithContext 

func (i GetSettingsAuthenticationRuleSourceAddress6Array) ToGetSettingsAuthenticationRuleSourceAddress6ArrayOutputWithContext(ctx context.Context) GetSettingsAuthenticationRuleSourceAddress6ArrayOutput

type GetSettingsAuthenticationRuleSourceAddress6ArrayInput 

type GetSettingsAuthenticationRuleSourceAddress6ArrayInput interface {
	pulumi.Input

	ToGetSettingsAuthenticationRuleSourceAddress6ArrayOutput() GetSettingsAuthenticationRuleSourceAddress6ArrayOutput
	ToGetSettingsAuthenticationRuleSourceAddress6ArrayOutputWithContext(context.Context) GetSettingsAuthenticationRuleSourceAddress6ArrayOutput
}

GetSettingsAuthenticationRuleSourceAddress6ArrayInput is an input type that accepts GetSettingsAuthenticationRuleSourceAddress6Array and GetSettingsAuthenticationRuleSourceAddress6ArrayOutput values. You can construct a concrete instance of `GetSettingsAuthenticationRuleSourceAddress6ArrayInput` via: 

GetSettingsAuthenticationRuleSourceAddress6Array{ GetSettingsAuthenticationRuleSourceAddress6Args{...} }

type GetSettingsAuthenticationRuleSourceAddress6ArrayOutput 

type GetSettingsAuthenticationRuleSourceAddress6ArrayOutput struct{ *pulumi.OutputState }

func (GetSettingsAuthenticationRuleSourceAddress6ArrayOutput) ElementType 

func (GetSettingsAuthenticationRuleSourceAddress6ArrayOutput) ElementType() reflect.Type

func (GetSettingsAuthenticationRuleSourceAddress6ArrayOutput) Index 

func (o GetSettingsAuthenticationRuleSourceAddress6ArrayOutput) Index(i pulumi.IntInput) GetSettingsAuthenticationRuleSourceAddress6Output

func (GetSettingsAuthenticationRuleSourceAddress6ArrayOutput) ToGetSettingsAuthenticationRuleSourceAddress6ArrayOutput 

func (o GetSettingsAuthenticationRuleSourceAddress6ArrayOutput) ToGetSettingsAuthenticationRuleSourceAddress6ArrayOutput() GetSettingsAuthenticationRuleSourceAddress6ArrayOutput

func (GetSettingsAuthenticationRuleSourceAddress6ArrayOutput) ToGetSettingsAuthenticationRuleSourceAddress6ArrayOutputWithContext 

func (o GetSettingsAuthenticationRuleSourceAddress6ArrayOutput) ToGetSettingsAuthenticationRuleSourceAddress6ArrayOutputWithContext(ctx context.Context) GetSettingsAuthenticationRuleSourceAddress6ArrayOutput

type GetSettingsAuthenticationRuleSourceAddress6Input 

type GetSettingsAuthenticationRuleSourceAddress6Input interface {
	pulumi.Input

	ToGetSettingsAuthenticationRuleSourceAddress6Output() GetSettingsAuthenticationRuleSourceAddress6Output
	ToGetSettingsAuthenticationRuleSourceAddress6OutputWithContext(context.Context) GetSettingsAuthenticationRuleSourceAddress6Output
}

GetSettingsAuthenticationRuleSourceAddress6Input is an input type that accepts GetSettingsAuthenticationRuleSourceAddress6Args and GetSettingsAuthenticationRuleSourceAddress6Output values. You can construct a concrete instance of `GetSettingsAuthenticationRuleSourceAddress6Input` via: 

GetSettingsAuthenticationRuleSourceAddress6Args{...}

type GetSettingsAuthenticationRuleSourceAddress6Output 

type GetSettingsAuthenticationRuleSourceAddress6Output struct{ *pulumi.OutputState }

func (GetSettingsAuthenticationRuleSourceAddress6Output) ElementType 

func (GetSettingsAuthenticationRuleSourceAddress6Output) ElementType() reflect.Type

func (GetSettingsAuthenticationRuleSourceAddress6Output) Name 

func (o GetSettingsAuthenticationRuleSourceAddress6Output) Name() pulumi.StringOutput

Group name.

func (GetSettingsAuthenticationRuleSourceAddress6Output) ToGetSettingsAuthenticationRuleSourceAddress6Output 

func (o GetSettingsAuthenticationRuleSourceAddress6Output) ToGetSettingsAuthenticationRuleSourceAddress6Output() GetSettingsAuthenticationRuleSourceAddress6Output

func (GetSettingsAuthenticationRuleSourceAddress6Output) ToGetSettingsAuthenticationRuleSourceAddress6OutputWithContext 

func (o GetSettingsAuthenticationRuleSourceAddress6Output) ToGetSettingsAuthenticationRuleSourceAddress6OutputWithContext(ctx context.Context) GetSettingsAuthenticationRuleSourceAddress6Output

type GetSettingsAuthenticationRuleSourceAddressArgs 

type GetSettingsAuthenticationRuleSourceAddressArgs struct {
	// Group name.
	Name pulumi.StringInput `pulumi:"name"`
}

func (GetSettingsAuthenticationRuleSourceAddressArgs) ElementType 

func (GetSettingsAuthenticationRuleSourceAddressArgs) ElementType() reflect.Type

func (GetSettingsAuthenticationRuleSourceAddressArgs) ToGetSettingsAuthenticationRuleSourceAddressOutput 

func (i GetSettingsAuthenticationRuleSourceAddressArgs) ToGetSettingsAuthenticationRuleSourceAddressOutput() GetSettingsAuthenticationRuleSourceAddressOutput

func (GetSettingsAuthenticationRuleSourceAddressArgs) ToGetSettingsAuthenticationRuleSourceAddressOutputWithContext 

func (i GetSettingsAuthenticationRuleSourceAddressArgs) ToGetSettingsAuthenticationRuleSourceAddressOutputWithContext(ctx context.Context) GetSettingsAuthenticationRuleSourceAddressOutput

type GetSettingsAuthenticationRuleSourceAddressArray 

type GetSettingsAuthenticationRuleSourceAddressArray []GetSettingsAuthenticationRuleSourceAddressInput

func (GetSettingsAuthenticationRuleSourceAddressArray) ElementType 

func (GetSettingsAuthenticationRuleSourceAddressArray) ElementType() reflect.Type

func (GetSettingsAuthenticationRuleSourceAddressArray) ToGetSettingsAuthenticationRuleSourceAddressArrayOutput 

func (i GetSettingsAuthenticationRuleSourceAddressArray) ToGetSettingsAuthenticationRuleSourceAddressArrayOutput() GetSettingsAuthenticationRuleSourceAddressArrayOutput

func (GetSettingsAuthenticationRuleSourceAddressArray) ToGetSettingsAuthenticationRuleSourceAddressArrayOutputWithContext 

func (i GetSettingsAuthenticationRuleSourceAddressArray) ToGetSettingsAuthenticationRuleSourceAddressArrayOutputWithContext(ctx context.Context) GetSettingsAuthenticationRuleSourceAddressArrayOutput

type GetSettingsAuthenticationRuleSourceAddressArrayInput 

type GetSettingsAuthenticationRuleSourceAddressArrayInput interface {
	pulumi.Input

	ToGetSettingsAuthenticationRuleSourceAddressArrayOutput() GetSettingsAuthenticationRuleSourceAddressArrayOutput
	ToGetSettingsAuthenticationRuleSourceAddressArrayOutputWithContext(context.Context) GetSettingsAuthenticationRuleSourceAddressArrayOutput
}

GetSettingsAuthenticationRuleSourceAddressArrayInput is an input type that accepts GetSettingsAuthenticationRuleSourceAddressArray and GetSettingsAuthenticationRuleSourceAddressArrayOutput values. You can construct a concrete instance of `GetSettingsAuthenticationRuleSourceAddressArrayInput` via: 

GetSettingsAuthenticationRuleSourceAddressArray{ GetSettingsAuthenticationRuleSourceAddressArgs{...} }

type GetSettingsAuthenticationRuleSourceAddressArrayOutput 

type GetSettingsAuthenticationRuleSourceAddressArrayOutput struct{ *pulumi.OutputState }

func (GetSettingsAuthenticationRuleSourceAddressArrayOutput) ElementType 

func (GetSettingsAuthenticationRuleSourceAddressArrayOutput) ElementType() reflect.Type

func (GetSettingsAuthenticationRuleSourceAddressArrayOutput) Index 

func (o GetSettingsAuthenticationRuleSourceAddressArrayOutput) Index(i pulumi.IntInput) GetSettingsAuthenticationRuleSourceAddressOutput

func (GetSettingsAuthenticationRuleSourceAddressArrayOutput) ToGetSettingsAuthenticationRuleSourceAddressArrayOutput 

func (o GetSettingsAuthenticationRuleSourceAddressArrayOutput) ToGetSettingsAuthenticationRuleSourceAddressArrayOutput() GetSettingsAuthenticationRuleSourceAddressArrayOutput

func (GetSettingsAuthenticationRuleSourceAddressArrayOutput) ToGetSettingsAuthenticationRuleSourceAddressArrayOutputWithContext 

func (o GetSettingsAuthenticationRuleSourceAddressArrayOutput) ToGetSettingsAuthenticationRuleSourceAddressArrayOutputWithContext(ctx context.Context) GetSettingsAuthenticationRuleSourceAddressArrayOutput

type GetSettingsAuthenticationRuleSourceAddressInput 

type GetSettingsAuthenticationRuleSourceAddressInput interface {
	pulumi.Input

	ToGetSettingsAuthenticationRuleSourceAddressOutput() GetSettingsAuthenticationRuleSourceAddressOutput
	ToGetSettingsAuthenticationRuleSourceAddressOutputWithContext(context.Context) GetSettingsAuthenticationRuleSourceAddressOutput
}

GetSettingsAuthenticationRuleSourceAddressInput is an input type that accepts GetSettingsAuthenticationRuleSourceAddressArgs and GetSettingsAuthenticationRuleSourceAddressOutput values. You can construct a concrete instance of `GetSettingsAuthenticationRuleSourceAddressInput` via: 

GetSettingsAuthenticationRuleSourceAddressArgs{...}

type GetSettingsAuthenticationRuleSourceAddressOutput 

type GetSettingsAuthenticationRuleSourceAddressOutput struct{ *pulumi.OutputState }

func (GetSettingsAuthenticationRuleSourceAddressOutput) ElementType 

func (GetSettingsAuthenticationRuleSourceAddressOutput) ElementType() reflect.Type

func (GetSettingsAuthenticationRuleSourceAddressOutput) Name 

func (o GetSettingsAuthenticationRuleSourceAddressOutput) Name() pulumi.StringOutput

Group name.

func (GetSettingsAuthenticationRuleSourceAddressOutput) ToGetSettingsAuthenticationRuleSourceAddressOutput 

func (o GetSettingsAuthenticationRuleSourceAddressOutput) ToGetSettingsAuthenticationRuleSourceAddressOutput() GetSettingsAuthenticationRuleSourceAddressOutput

func (GetSettingsAuthenticationRuleSourceAddressOutput) ToGetSettingsAuthenticationRuleSourceAddressOutputWithContext 

func (o GetSettingsAuthenticationRuleSourceAddressOutput) ToGetSettingsAuthenticationRuleSourceAddressOutputWithContext(ctx context.Context) GetSettingsAuthenticationRuleSourceAddressOutput

type GetSettingsAuthenticationRuleSourceInterface 

type GetSettingsAuthenticationRuleSourceInterface struct {
	// Group name.
	Name string `pulumi:"name"`
}

type GetSettingsAuthenticationRuleSourceInterfaceArgs 

type GetSettingsAuthenticationRuleSourceInterfaceArgs struct {
	// Group name.
	Name pulumi.StringInput `pulumi:"name"`
}

func (GetSettingsAuthenticationRuleSourceInterfaceArgs) ElementType 

func (GetSettingsAuthenticationRuleSourceInterfaceArgs) ElementType() reflect.Type

func (GetSettingsAuthenticationRuleSourceInterfaceArgs) ToGetSettingsAuthenticationRuleSourceInterfaceOutput 

func (i GetSettingsAuthenticationRuleSourceInterfaceArgs) ToGetSettingsAuthenticationRuleSourceInterfaceOutput() GetSettingsAuthenticationRuleSourceInterfaceOutput

func (GetSettingsAuthenticationRuleSourceInterfaceArgs) ToGetSettingsAuthenticationRuleSourceInterfaceOutputWithContext 

func (i GetSettingsAuthenticationRuleSourceInterfaceArgs) ToGetSettingsAuthenticationRuleSourceInterfaceOutputWithContext(ctx context.Context) GetSettingsAuthenticationRuleSourceInterfaceOutput

type GetSettingsAuthenticationRuleSourceInterfaceArray 

type GetSettingsAuthenticationRuleSourceInterfaceArray []GetSettingsAuthenticationRuleSourceInterfaceInput

func (GetSettingsAuthenticationRuleSourceInterfaceArray) ElementType 

func (GetSettingsAuthenticationRuleSourceInterfaceArray) ElementType() reflect.Type

func (GetSettingsAuthenticationRuleSourceInterfaceArray) ToGetSettingsAuthenticationRuleSourceInterfaceArrayOutput 

func (i GetSettingsAuthenticationRuleSourceInterfaceArray) ToGetSettingsAuthenticationRuleSourceInterfaceArrayOutput() GetSettingsAuthenticationRuleSourceInterfaceArrayOutput

func (GetSettingsAuthenticationRuleSourceInterfaceArray) ToGetSettingsAuthenticationRuleSourceInterfaceArrayOutputWithContext 

func (i GetSettingsAuthenticationRuleSourceInterfaceArray) ToGetSettingsAuthenticationRuleSourceInterfaceArrayOutputWithContext(ctx context.Context) GetSettingsAuthenticationRuleSourceInterfaceArrayOutput

type GetSettingsAuthenticationRuleSourceInterfaceArrayInput 

type GetSettingsAuthenticationRuleSourceInterfaceArrayInput interface {
	pulumi.Input

	ToGetSettingsAuthenticationRuleSourceInterfaceArrayOutput() GetSettingsAuthenticationRuleSourceInterfaceArrayOutput
	ToGetSettingsAuthenticationRuleSourceInterfaceArrayOutputWithContext(context.Context) GetSettingsAuthenticationRuleSourceInterfaceArrayOutput
}

GetSettingsAuthenticationRuleSourceInterfaceArrayInput is an input type that accepts GetSettingsAuthenticationRuleSourceInterfaceArray and GetSettingsAuthenticationRuleSourceInterfaceArrayOutput values. You can construct a concrete instance of `GetSettingsAuthenticationRuleSourceInterfaceArrayInput` via: 

GetSettingsAuthenticationRuleSourceInterfaceArray{ GetSettingsAuthenticationRuleSourceInterfaceArgs{...} }

type GetSettingsAuthenticationRuleSourceInterfaceArrayOutput 

type GetSettingsAuthenticationRuleSourceInterfaceArrayOutput struct{ *pulumi.OutputState }

func (GetSettingsAuthenticationRuleSourceInterfaceArrayOutput) ElementType 

func (GetSettingsAuthenticationRuleSourceInterfaceArrayOutput) ElementType() reflect.Type

func (GetSettingsAuthenticationRuleSourceInterfaceArrayOutput) Index 

func (o GetSettingsAuthenticationRuleSourceInterfaceArrayOutput) Index(i pulumi.IntInput) GetSettingsAuthenticationRuleSourceInterfaceOutput

func (GetSettingsAuthenticationRuleSourceInterfaceArrayOutput) ToGetSettingsAuthenticationRuleSourceInterfaceArrayOutput 

func (o GetSettingsAuthenticationRuleSourceInterfaceArrayOutput) ToGetSettingsAuthenticationRuleSourceInterfaceArrayOutput() GetSettingsAuthenticationRuleSourceInterfaceArrayOutput

func (GetSettingsAuthenticationRuleSourceInterfaceArrayOutput) ToGetSettingsAuthenticationRuleSourceInterfaceArrayOutputWithContext 

func (o GetSettingsAuthenticationRuleSourceInterfaceArrayOutput) ToGetSettingsAuthenticationRuleSourceInterfaceArrayOutputWithContext(ctx context.Context) GetSettingsAuthenticationRuleSourceInterfaceArrayOutput

type GetSettingsAuthenticationRuleSourceInterfaceInput 

type GetSettingsAuthenticationRuleSourceInterfaceInput interface {
	pulumi.Input

	ToGetSettingsAuthenticationRuleSourceInterfaceOutput() GetSettingsAuthenticationRuleSourceInterfaceOutput
	ToGetSettingsAuthenticationRuleSourceInterfaceOutputWithContext(context.Context) GetSettingsAuthenticationRuleSourceInterfaceOutput
}

GetSettingsAuthenticationRuleSourceInterfaceInput is an input type that accepts GetSettingsAuthenticationRuleSourceInterfaceArgs and GetSettingsAuthenticationRuleSourceInterfaceOutput values. You can construct a concrete instance of `GetSettingsAuthenticationRuleSourceInterfaceInput` via: 

GetSettingsAuthenticationRuleSourceInterfaceArgs{...}

type GetSettingsAuthenticationRuleSourceInterfaceOutput 

type GetSettingsAuthenticationRuleSourceInterfaceOutput struct{ *pulumi.OutputState }

func (GetSettingsAuthenticationRuleSourceInterfaceOutput) ElementType 

func (GetSettingsAuthenticationRuleSourceInterfaceOutput) ElementType() reflect.Type

func (GetSettingsAuthenticationRuleSourceInterfaceOutput) Name 

func (o GetSettingsAuthenticationRuleSourceInterfaceOutput) Name() pulumi.StringOutput

Group name.

func (GetSettingsAuthenticationRuleSourceInterfaceOutput) ToGetSettingsAuthenticationRuleSourceInterfaceOutput 

func (o GetSettingsAuthenticationRuleSourceInterfaceOutput) ToGetSettingsAuthenticationRuleSourceInterfaceOutput() GetSettingsAuthenticationRuleSourceInterfaceOutput

func (GetSettingsAuthenticationRuleSourceInterfaceOutput) ToGetSettingsAuthenticationRuleSourceInterfaceOutputWithContext 

func (o GetSettingsAuthenticationRuleSourceInterfaceOutput) ToGetSettingsAuthenticationRuleSourceInterfaceOutputWithContext(ctx context.Context) GetSettingsAuthenticationRuleSourceInterfaceOutput

type GetSettingsAuthenticationRuleUser 

type GetSettingsAuthenticationRuleUser struct {
	// Group name.
	Name string `pulumi:"name"`
}

type GetSettingsAuthenticationRuleUserArgs 

type GetSettingsAuthenticationRuleUserArgs struct {
	// Group name.
	Name pulumi.StringInput `pulumi:"name"`
}

func (GetSettingsAuthenticationRuleUserArgs) ElementType 

func (GetSettingsAuthenticationRuleUserArgs) ElementType() reflect.Type

func (GetSettingsAuthenticationRuleUserArgs) ToGetSettingsAuthenticationRuleUserOutput 

func (i GetSettingsAuthenticationRuleUserArgs) ToGetSettingsAuthenticationRuleUserOutput() GetSettingsAuthenticationRuleUserOutput

func (GetSettingsAuthenticationRuleUserArgs) ToGetSettingsAuthenticationRuleUserOutputWithContext 

func (i GetSettingsAuthenticationRuleUserArgs) ToGetSettingsAuthenticationRuleUserOutputWithContext(ctx context.Context) GetSettingsAuthenticationRuleUserOutput

type GetSettingsAuthenticationRuleUserArray 

type GetSettingsAuthenticationRuleUserArray []GetSettingsAuthenticationRuleUserInput

func (GetSettingsAuthenticationRuleUserArray) ElementType 

func (GetSettingsAuthenticationRuleUserArray) ElementType() reflect.Type

func (GetSettingsAuthenticationRuleUserArray) ToGetSettingsAuthenticationRuleUserArrayOutput 

func (i GetSettingsAuthenticationRuleUserArray) ToGetSettingsAuthenticationRuleUserArrayOutput() GetSettingsAuthenticationRuleUserArrayOutput

func (GetSettingsAuthenticationRuleUserArray) ToGetSettingsAuthenticationRuleUserArrayOutputWithContext 

func (i GetSettingsAuthenticationRuleUserArray) ToGetSettingsAuthenticationRuleUserArrayOutputWithContext(ctx context.Context) GetSettingsAuthenticationRuleUserArrayOutput

type GetSettingsAuthenticationRuleUserArrayInput 

type GetSettingsAuthenticationRuleUserArrayInput interface {
	pulumi.Input

	ToGetSettingsAuthenticationRuleUserArrayOutput() GetSettingsAuthenticationRuleUserArrayOutput
	ToGetSettingsAuthenticationRuleUserArrayOutputWithContext(context.Context) GetSettingsAuthenticationRuleUserArrayOutput
}

GetSettingsAuthenticationRuleUserArrayInput is an input type that accepts GetSettingsAuthenticationRuleUserArray and GetSettingsAuthenticationRuleUserArrayOutput values. You can construct a concrete instance of `GetSettingsAuthenticationRuleUserArrayInput` via: 

GetSettingsAuthenticationRuleUserArray{ GetSettingsAuthenticationRuleUserArgs{...} }

type GetSettingsAuthenticationRuleUserArrayOutput 

type GetSettingsAuthenticationRuleUserArrayOutput struct{ *pulumi.OutputState }

func (GetSettingsAuthenticationRuleUserArrayOutput) ElementType 

func (GetSettingsAuthenticationRuleUserArrayOutput) ElementType() reflect.Type

func (GetSettingsAuthenticationRuleUserArrayOutput) Index 

func (o GetSettingsAuthenticationRuleUserArrayOutput) Index(i pulumi.IntInput) GetSettingsAuthenticationRuleUserOutput

func (GetSettingsAuthenticationRuleUserArrayOutput) ToGetSettingsAuthenticationRuleUserArrayOutput 

func (o GetSettingsAuthenticationRuleUserArrayOutput) ToGetSettingsAuthenticationRuleUserArrayOutput() GetSettingsAuthenticationRuleUserArrayOutput

func (GetSettingsAuthenticationRuleUserArrayOutput) ToGetSettingsAuthenticationRuleUserArrayOutputWithContext 

func (o GetSettingsAuthenticationRuleUserArrayOutput) ToGetSettingsAuthenticationRuleUserArrayOutputWithContext(ctx context.Context) GetSettingsAuthenticationRuleUserArrayOutput

type GetSettingsAuthenticationRuleUserInput 

type GetSettingsAuthenticationRuleUserInput interface {
	pulumi.Input

	ToGetSettingsAuthenticationRuleUserOutput() GetSettingsAuthenticationRuleUserOutput
	ToGetSettingsAuthenticationRuleUserOutputWithContext(context.Context) GetSettingsAuthenticationRuleUserOutput
}

GetSettingsAuthenticationRuleUserInput is an input type that accepts GetSettingsAuthenticationRuleUserArgs and GetSettingsAuthenticationRuleUserOutput values. You can construct a concrete instance of `GetSettingsAuthenticationRuleUserInput` via: 

GetSettingsAuthenticationRuleUserArgs{...}

type GetSettingsAuthenticationRuleUserOutput 

type GetSettingsAuthenticationRuleUserOutput struct{ *pulumi.OutputState }

func (GetSettingsAuthenticationRuleUserOutput) ElementType 

func (GetSettingsAuthenticationRuleUserOutput) ElementType() reflect.Type

func (GetSettingsAuthenticationRuleUserOutput) Name 

func (o GetSettingsAuthenticationRuleUserOutput) Name() pulumi.StringOutput

Group name.

func (GetSettingsAuthenticationRuleUserOutput) ToGetSettingsAuthenticationRuleUserOutput 

func (o GetSettingsAuthenticationRuleUserOutput) ToGetSettingsAuthenticationRuleUserOutput() GetSettingsAuthenticationRuleUserOutput

func (GetSettingsAuthenticationRuleUserOutput) ToGetSettingsAuthenticationRuleUserOutputWithContext 

func (o GetSettingsAuthenticationRuleUserOutput) ToGetSettingsAuthenticationRuleUserOutputWithContext(ctx context.Context) GetSettingsAuthenticationRuleUserOutput

type GetSettingsSourceAddress 

type GetSettingsSourceAddress struct {
	// Group name.
	Name string `pulumi:"name"`
}

type GetSettingsSourceAddress6 

type GetSettingsSourceAddress6 struct {
	// Group name.
	Name string `pulumi:"name"`
}

type GetSettingsSourceAddress6Args 

type GetSettingsSourceAddress6Args struct {
	// Group name.
	Name pulumi.StringInput `pulumi:"name"`
}

func (GetSettingsSourceAddress6Args) ElementType 

func (GetSettingsSourceAddress6Args) ElementType() reflect.Type

func (GetSettingsSourceAddress6Args) ToGetSettingsSourceAddress6Output 

func (i GetSettingsSourceAddress6Args) ToGetSettingsSourceAddress6Output() GetSettingsSourceAddress6Output

func (GetSettingsSourceAddress6Args) ToGetSettingsSourceAddress6OutputWithContext 

func (i GetSettingsSourceAddress6Args) ToGetSettingsSourceAddress6OutputWithContext(ctx context.Context) GetSettingsSourceAddress6Output

type GetSettingsSourceAddress6Array 

type GetSettingsSourceAddress6Array []GetSettingsSourceAddress6Input

func (GetSettingsSourceAddress6Array) ElementType 

func (GetSettingsSourceAddress6Array) ElementType() reflect.Type

func (GetSettingsSourceAddress6Array) ToGetSettingsSourceAddress6ArrayOutput 

func (i GetSettingsSourceAddress6Array) ToGetSettingsSourceAddress6ArrayOutput() GetSettingsSourceAddress6ArrayOutput

func (GetSettingsSourceAddress6Array) ToGetSettingsSourceAddress6ArrayOutputWithContext 

func (i GetSettingsSourceAddress6Array) ToGetSettingsSourceAddress6ArrayOutputWithContext(ctx context.Context) GetSettingsSourceAddress6ArrayOutput

type GetSettingsSourceAddress6ArrayInput 

type GetSettingsSourceAddress6ArrayInput interface {
	pulumi.Input

	ToGetSettingsSourceAddress6ArrayOutput() GetSettingsSourceAddress6ArrayOutput
	ToGetSettingsSourceAddress6ArrayOutputWithContext(context.Context) GetSettingsSourceAddress6ArrayOutput
}

GetSettingsSourceAddress6ArrayInput is an input type that accepts GetSettingsSourceAddress6Array and GetSettingsSourceAddress6ArrayOutput values. You can construct a concrete instance of `GetSettingsSourceAddress6ArrayInput` via: 

GetSettingsSourceAddress6Array{ GetSettingsSourceAddress6Args{...} }

type GetSettingsSourceAddress6ArrayOutput 

type GetSettingsSourceAddress6ArrayOutput struct{ *pulumi.OutputState }

func (GetSettingsSourceAddress6ArrayOutput) ElementType 

func (GetSettingsSourceAddress6ArrayOutput) ElementType() reflect.Type

func (GetSettingsSourceAddress6ArrayOutput) Index 

func (o GetSettingsSourceAddress6ArrayOutput) Index(i pulumi.IntInput) GetSettingsSourceAddress6Output

func (GetSettingsSourceAddress6ArrayOutput) ToGetSettingsSourceAddress6ArrayOutput 

func (o GetSettingsSourceAddress6ArrayOutput) ToGetSettingsSourceAddress6ArrayOutput() GetSettingsSourceAddress6ArrayOutput

func (GetSettingsSourceAddress6ArrayOutput) ToGetSettingsSourceAddress6ArrayOutputWithContext 

func (o GetSettingsSourceAddress6ArrayOutput) ToGetSettingsSourceAddress6ArrayOutputWithContext(ctx context.Context) GetSettingsSourceAddress6ArrayOutput

type GetSettingsSourceAddress6Input 

type GetSettingsSourceAddress6Input interface {
	pulumi.Input

	ToGetSettingsSourceAddress6Output() GetSettingsSourceAddress6Output
	ToGetSettingsSourceAddress6OutputWithContext(context.Context) GetSettingsSourceAddress6Output
}

GetSettingsSourceAddress6Input is an input type that accepts GetSettingsSourceAddress6Args and GetSettingsSourceAddress6Output values. You can construct a concrete instance of `GetSettingsSourceAddress6Input` via: 

GetSettingsSourceAddress6Args{...}

type GetSettingsSourceAddress6Output 

type GetSettingsSourceAddress6Output struct{ *pulumi.OutputState }

func (GetSettingsSourceAddress6Output) ElementType 

func (GetSettingsSourceAddress6Output) ElementType() reflect.Type

func (GetSettingsSourceAddress6Output) Name 

func (o GetSettingsSourceAddress6Output) Name() pulumi.StringOutput

Group name.

func (GetSettingsSourceAddress6Output) ToGetSettingsSourceAddress6Output 

func (o GetSettingsSourceAddress6Output) ToGetSettingsSourceAddress6Output() GetSettingsSourceAddress6Output

func (GetSettingsSourceAddress6Output) ToGetSettingsSourceAddress6OutputWithContext 

func (o GetSettingsSourceAddress6Output) ToGetSettingsSourceAddress6OutputWithContext(ctx context.Context) GetSettingsSourceAddress6Output

type GetSettingsSourceAddressArgs 

type GetSettingsSourceAddressArgs struct {
	// Group name.
	Name pulumi.StringInput `pulumi:"name"`
}

func (GetSettingsSourceAddressArgs) ElementType 

func (GetSettingsSourceAddressArgs) ElementType() reflect.Type

func (GetSettingsSourceAddressArgs) ToGetSettingsSourceAddressOutput 

func (i GetSettingsSourceAddressArgs) ToGetSettingsSourceAddressOutput() GetSettingsSourceAddressOutput

func (GetSettingsSourceAddressArgs) ToGetSettingsSourceAddressOutputWithContext 

func (i GetSettingsSourceAddressArgs) ToGetSettingsSourceAddressOutputWithContext(ctx context.Context) GetSettingsSourceAddressOutput

type GetSettingsSourceAddressArray 

type GetSettingsSourceAddressArray []GetSettingsSourceAddressInput

func (GetSettingsSourceAddressArray) ElementType 

func (GetSettingsSourceAddressArray) ElementType() reflect.Type

func (GetSettingsSourceAddressArray) ToGetSettingsSourceAddressArrayOutput 

func (i GetSettingsSourceAddressArray) ToGetSettingsSourceAddressArrayOutput() GetSettingsSourceAddressArrayOutput

func (GetSettingsSourceAddressArray) ToGetSettingsSourceAddressArrayOutputWithContext 

func (i GetSettingsSourceAddressArray) ToGetSettingsSourceAddressArrayOutputWithContext(ctx context.Context) GetSettingsSourceAddressArrayOutput

type GetSettingsSourceAddressArrayInput 

type GetSettingsSourceAddressArrayInput interface {
	pulumi.Input

	ToGetSettingsSourceAddressArrayOutput() GetSettingsSourceAddressArrayOutput
	ToGetSettingsSourceAddressArrayOutputWithContext(context.Context) GetSettingsSourceAddressArrayOutput
}

GetSettingsSourceAddressArrayInput is an input type that accepts GetSettingsSourceAddressArray and GetSettingsSourceAddressArrayOutput values. You can construct a concrete instance of `GetSettingsSourceAddressArrayInput` via: 

GetSettingsSourceAddressArray{ GetSettingsSourceAddressArgs{...} }

type GetSettingsSourceAddressArrayOutput 

type GetSettingsSourceAddressArrayOutput struct{ *pulumi.OutputState }

func (GetSettingsSourceAddressArrayOutput) ElementType 

func (GetSettingsSourceAddressArrayOutput) ElementType() reflect.Type

func (GetSettingsSourceAddressArrayOutput) Index 

func (o GetSettingsSourceAddressArrayOutput) Index(i pulumi.IntInput) GetSettingsSourceAddressOutput

func (GetSettingsSourceAddressArrayOutput) ToGetSettingsSourceAddressArrayOutput 

func (o GetSettingsSourceAddressArrayOutput) ToGetSettingsSourceAddressArrayOutput() GetSettingsSourceAddressArrayOutput

func (GetSettingsSourceAddressArrayOutput) ToGetSettingsSourceAddressArrayOutputWithContext 

func (o GetSettingsSourceAddressArrayOutput) ToGetSettingsSourceAddressArrayOutputWithContext(ctx context.Context) GetSettingsSourceAddressArrayOutput

type GetSettingsSourceAddressInput 

type GetSettingsSourceAddressInput interface {
	pulumi.Input

	ToGetSettingsSourceAddressOutput() GetSettingsSourceAddressOutput
	ToGetSettingsSourceAddressOutputWithContext(context.Context) GetSettingsSourceAddressOutput
}

GetSettingsSourceAddressInput is an input type that accepts GetSettingsSourceAddressArgs and GetSettingsSourceAddressOutput values. You can construct a concrete instance of `GetSettingsSourceAddressInput` via: 

GetSettingsSourceAddressArgs{...}

type GetSettingsSourceAddressOutput 

type GetSettingsSourceAddressOutput struct{ *pulumi.OutputState }

func (GetSettingsSourceAddressOutput) ElementType 

func (GetSettingsSourceAddressOutput) ElementType() reflect.Type

func (GetSettingsSourceAddressOutput) Name 

func (o GetSettingsSourceAddressOutput) Name() pulumi.StringOutput

Group name.

func (GetSettingsSourceAddressOutput) ToGetSettingsSourceAddressOutput 

func (o GetSettingsSourceAddressOutput) ToGetSettingsSourceAddressOutput() GetSettingsSourceAddressOutput

func (GetSettingsSourceAddressOutput) ToGetSettingsSourceAddressOutputWithContext 

func (o GetSettingsSourceAddressOutput) ToGetSettingsSourceAddressOutputWithContext(ctx context.Context) GetSettingsSourceAddressOutput

type GetSettingsSourceInterface 

type GetSettingsSourceInterface struct {
	// Group name.
	Name string `pulumi:"name"`
}

type GetSettingsSourceInterfaceArgs 

type GetSettingsSourceInterfaceArgs struct {
	// Group name.
	Name pulumi.StringInput `pulumi:"name"`
}

func (GetSettingsSourceInterfaceArgs) ElementType 

func (GetSettingsSourceInterfaceArgs) ElementType() reflect.Type

func (GetSettingsSourceInterfaceArgs) ToGetSettingsSourceInterfaceOutput 

func (i GetSettingsSourceInterfaceArgs) ToGetSettingsSourceInterfaceOutput() GetSettingsSourceInterfaceOutput

func (GetSettingsSourceInterfaceArgs) ToGetSettingsSourceInterfaceOutputWithContext 

func (i GetSettingsSourceInterfaceArgs) ToGetSettingsSourceInterfaceOutputWithContext(ctx context.Context) GetSettingsSourceInterfaceOutput

type GetSettingsSourceInterfaceArray 

type GetSettingsSourceInterfaceArray []GetSettingsSourceInterfaceInput

func (GetSettingsSourceInterfaceArray) ElementType 

func (GetSettingsSourceInterfaceArray) ElementType() reflect.Type

func (GetSettingsSourceInterfaceArray) ToGetSettingsSourceInterfaceArrayOutput 

func (i GetSettingsSourceInterfaceArray) ToGetSettingsSourceInterfaceArrayOutput() GetSettingsSourceInterfaceArrayOutput

func (GetSettingsSourceInterfaceArray) ToGetSettingsSourceInterfaceArrayOutputWithContext 

func (i GetSettingsSourceInterfaceArray) ToGetSettingsSourceInterfaceArrayOutputWithContext(ctx context.Context) GetSettingsSourceInterfaceArrayOutput

type GetSettingsSourceInterfaceArrayInput 

type GetSettingsSourceInterfaceArrayInput interface {
	pulumi.Input

	ToGetSettingsSourceInterfaceArrayOutput() GetSettingsSourceInterfaceArrayOutput
	ToGetSettingsSourceInterfaceArrayOutputWithContext(context.Context) GetSettingsSourceInterfaceArrayOutput
}

GetSettingsSourceInterfaceArrayInput is an input type that accepts GetSettingsSourceInterfaceArray and GetSettingsSourceInterfaceArrayOutput values. You can construct a concrete instance of `GetSettingsSourceInterfaceArrayInput` via: 

GetSettingsSourceInterfaceArray{ GetSettingsSourceInterfaceArgs{...} }

type GetSettingsSourceInterfaceArrayOutput 

type GetSettingsSourceInterfaceArrayOutput struct{ *pulumi.OutputState }

func (GetSettingsSourceInterfaceArrayOutput) ElementType 

func (GetSettingsSourceInterfaceArrayOutput) ElementType() reflect.Type

func (GetSettingsSourceInterfaceArrayOutput) Index 

func (o GetSettingsSourceInterfaceArrayOutput) Index(i pulumi.IntInput) GetSettingsSourceInterfaceOutput

func (GetSettingsSourceInterfaceArrayOutput) ToGetSettingsSourceInterfaceArrayOutput 

func (o GetSettingsSourceInterfaceArrayOutput) ToGetSettingsSourceInterfaceArrayOutput() GetSettingsSourceInterfaceArrayOutput

func (GetSettingsSourceInterfaceArrayOutput) ToGetSettingsSourceInterfaceArrayOutputWithContext 

func (o GetSettingsSourceInterfaceArrayOutput) ToGetSettingsSourceInterfaceArrayOutputWithContext(ctx context.Context) GetSettingsSourceInterfaceArrayOutput

type GetSettingsSourceInterfaceInput 

type GetSettingsSourceInterfaceInput interface {
	pulumi.Input

	ToGetSettingsSourceInterfaceOutput() GetSettingsSourceInterfaceOutput
	ToGetSettingsSourceInterfaceOutputWithContext(context.Context) GetSettingsSourceInterfaceOutput
}

GetSettingsSourceInterfaceInput is an input type that accepts GetSettingsSourceInterfaceArgs and GetSettingsSourceInterfaceOutput values. You can construct a concrete instance of `GetSettingsSourceInterfaceInput` via: 

GetSettingsSourceInterfaceArgs{...}

type GetSettingsSourceInterfaceOutput 

type GetSettingsSourceInterfaceOutput struct{ *pulumi.OutputState }

func (GetSettingsSourceInterfaceOutput) ElementType 

func (GetSettingsSourceInterfaceOutput) ElementType() reflect.Type

func (GetSettingsSourceInterfaceOutput) Name 

func (o GetSettingsSourceInterfaceOutput) Name() pulumi.StringOutput

Group name.

func (GetSettingsSourceInterfaceOutput) ToGetSettingsSourceInterfaceOutput 

func (o GetSettingsSourceInterfaceOutput) ToGetSettingsSourceInterfaceOutput() GetSettingsSourceInterfaceOutput

func (GetSettingsSourceInterfaceOutput) ToGetSettingsSourceInterfaceOutputWithContext 

func (o GetSettingsSourceInterfaceOutput) ToGetSettingsSourceInterfaceOutputWithContext(ctx context.Context) GetSettingsSourceInterfaceOutput

type GetSettingsTunnelIpPool 

type GetSettingsTunnelIpPool struct {
	// Group name.
	Name string `pulumi:"name"`
}

type GetSettingsTunnelIpPoolArgs 

type GetSettingsTunnelIpPoolArgs struct {
	// Group name.
	Name pulumi.StringInput `pulumi:"name"`
}

func (GetSettingsTunnelIpPoolArgs) ElementType 

func (GetSettingsTunnelIpPoolArgs) ElementType() reflect.Type

func (GetSettingsTunnelIpPoolArgs) ToGetSettingsTunnelIpPoolOutput 

func (i GetSettingsTunnelIpPoolArgs) ToGetSettingsTunnelIpPoolOutput() GetSettingsTunnelIpPoolOutput

func (GetSettingsTunnelIpPoolArgs) ToGetSettingsTunnelIpPoolOutputWithContext 

func (i GetSettingsTunnelIpPoolArgs) ToGetSettingsTunnelIpPoolOutputWithContext(ctx context.Context) GetSettingsTunnelIpPoolOutput

type GetSettingsTunnelIpPoolArray 

type GetSettingsTunnelIpPoolArray []GetSettingsTunnelIpPoolInput

func (GetSettingsTunnelIpPoolArray) ElementType 

func (GetSettingsTunnelIpPoolArray) ElementType() reflect.Type

func (GetSettingsTunnelIpPoolArray) ToGetSettingsTunnelIpPoolArrayOutput 

func (i GetSettingsTunnelIpPoolArray) ToGetSettingsTunnelIpPoolArrayOutput() GetSettingsTunnelIpPoolArrayOutput

func (GetSettingsTunnelIpPoolArray) ToGetSettingsTunnelIpPoolArrayOutputWithContext 

func (i GetSettingsTunnelIpPoolArray) ToGetSettingsTunnelIpPoolArrayOutputWithContext(ctx context.Context) GetSettingsTunnelIpPoolArrayOutput

type GetSettingsTunnelIpPoolArrayInput 

type GetSettingsTunnelIpPoolArrayInput interface {
	pulumi.Input

	ToGetSettingsTunnelIpPoolArrayOutput() GetSettingsTunnelIpPoolArrayOutput
	ToGetSettingsTunnelIpPoolArrayOutputWithContext(context.Context) GetSettingsTunnelIpPoolArrayOutput
}

GetSettingsTunnelIpPoolArrayInput is an input type that accepts GetSettingsTunnelIpPoolArray and GetSettingsTunnelIpPoolArrayOutput values. You can construct a concrete instance of `GetSettingsTunnelIpPoolArrayInput` via: 

GetSettingsTunnelIpPoolArray{ GetSettingsTunnelIpPoolArgs{...} }

type GetSettingsTunnelIpPoolArrayOutput 

type GetSettingsTunnelIpPoolArrayOutput struct{ *pulumi.OutputState }

func (GetSettingsTunnelIpPoolArrayOutput) ElementType 

func (GetSettingsTunnelIpPoolArrayOutput) ElementType() reflect.Type

func (GetSettingsTunnelIpPoolArrayOutput) Index 

func (o GetSettingsTunnelIpPoolArrayOutput) Index(i pulumi.IntInput) GetSettingsTunnelIpPoolOutput

func (GetSettingsTunnelIpPoolArrayOutput) ToGetSettingsTunnelIpPoolArrayOutput 

func (o GetSettingsTunnelIpPoolArrayOutput) ToGetSettingsTunnelIpPoolArrayOutput() GetSettingsTunnelIpPoolArrayOutput

func (GetSettingsTunnelIpPoolArrayOutput) ToGetSettingsTunnelIpPoolArrayOutputWithContext 

func (o GetSettingsTunnelIpPoolArrayOutput) ToGetSettingsTunnelIpPoolArrayOutputWithContext(ctx context.Context) GetSettingsTunnelIpPoolArrayOutput

type GetSettingsTunnelIpPoolInput 

type GetSettingsTunnelIpPoolInput interface {
	pulumi.Input

	ToGetSettingsTunnelIpPoolOutput() GetSettingsTunnelIpPoolOutput
	ToGetSettingsTunnelIpPoolOutputWithContext(context.Context) GetSettingsTunnelIpPoolOutput
}

GetSettingsTunnelIpPoolInput is an input type that accepts GetSettingsTunnelIpPoolArgs and GetSettingsTunnelIpPoolOutput values. You can construct a concrete instance of `GetSettingsTunnelIpPoolInput` via: 

GetSettingsTunnelIpPoolArgs{...}

type GetSettingsTunnelIpPoolOutput 

type GetSettingsTunnelIpPoolOutput struct{ *pulumi.OutputState }

func (GetSettingsTunnelIpPoolOutput) ElementType 

func (GetSettingsTunnelIpPoolOutput) ElementType() reflect.Type

func (GetSettingsTunnelIpPoolOutput) Name 

func (o GetSettingsTunnelIpPoolOutput) Name() pulumi.StringOutput

Group name.

func (GetSettingsTunnelIpPoolOutput) ToGetSettingsTunnelIpPoolOutput 

func (o GetSettingsTunnelIpPoolOutput) ToGetSettingsTunnelIpPoolOutput() GetSettingsTunnelIpPoolOutput

func (GetSettingsTunnelIpPoolOutput) ToGetSettingsTunnelIpPoolOutputWithContext 

func (o GetSettingsTunnelIpPoolOutput) ToGetSettingsTunnelIpPoolOutputWithContext(ctx context.Context) GetSettingsTunnelIpPoolOutput

type GetSettingsTunnelIpv6Pool 

type GetSettingsTunnelIpv6Pool struct {
	// Group name.
	Name string `pulumi:"name"`
}

type GetSettingsTunnelIpv6PoolArgs 

type GetSettingsTunnelIpv6PoolArgs struct {
	// Group name.
	Name pulumi.StringInput `pulumi:"name"`
}

func (GetSettingsTunnelIpv6PoolArgs) ElementType 

func (GetSettingsTunnelIpv6PoolArgs) ElementType() reflect.Type

func (GetSettingsTunnelIpv6PoolArgs) ToGetSettingsTunnelIpv6PoolOutput 

func (i GetSettingsTunnelIpv6PoolArgs) ToGetSettingsTunnelIpv6PoolOutput() GetSettingsTunnelIpv6PoolOutput

func (GetSettingsTunnelIpv6PoolArgs) ToGetSettingsTunnelIpv6PoolOutputWithContext 

func (i GetSettingsTunnelIpv6PoolArgs) ToGetSettingsTunnelIpv6PoolOutputWithContext(ctx context.Context) GetSettingsTunnelIpv6PoolOutput

type GetSettingsTunnelIpv6PoolArray 

type GetSettingsTunnelIpv6PoolArray []GetSettingsTunnelIpv6PoolInput

func (GetSettingsTunnelIpv6PoolArray) ElementType 

func (GetSettingsTunnelIpv6PoolArray) ElementType() reflect.Type

func (GetSettingsTunnelIpv6PoolArray) ToGetSettingsTunnelIpv6PoolArrayOutput 

func (i GetSettingsTunnelIpv6PoolArray) ToGetSettingsTunnelIpv6PoolArrayOutput() GetSettingsTunnelIpv6PoolArrayOutput

func (GetSettingsTunnelIpv6PoolArray) ToGetSettingsTunnelIpv6PoolArrayOutputWithContext 

func (i GetSettingsTunnelIpv6PoolArray) ToGetSettingsTunnelIpv6PoolArrayOutputWithContext(ctx context.Context) GetSettingsTunnelIpv6PoolArrayOutput

type GetSettingsTunnelIpv6PoolArrayInput 

type GetSettingsTunnelIpv6PoolArrayInput interface {
	pulumi.Input

	ToGetSettingsTunnelIpv6PoolArrayOutput() GetSettingsTunnelIpv6PoolArrayOutput
	ToGetSettingsTunnelIpv6PoolArrayOutputWithContext(context.Context) GetSettingsTunnelIpv6PoolArrayOutput
}

GetSettingsTunnelIpv6PoolArrayInput is an input type that accepts GetSettingsTunnelIpv6PoolArray and GetSettingsTunnelIpv6PoolArrayOutput values. You can construct a concrete instance of `GetSettingsTunnelIpv6PoolArrayInput` via: 

GetSettingsTunnelIpv6PoolArray{ GetSettingsTunnelIpv6PoolArgs{...} }

type GetSettingsTunnelIpv6PoolArrayOutput 

type GetSettingsTunnelIpv6PoolArrayOutput struct{ *pulumi.OutputState }

func (GetSettingsTunnelIpv6PoolArrayOutput) ElementType 

func (GetSettingsTunnelIpv6PoolArrayOutput) ElementType() reflect.Type

func (GetSettingsTunnelIpv6PoolArrayOutput) Index 

func (o GetSettingsTunnelIpv6PoolArrayOutput) Index(i pulumi.IntInput) GetSettingsTunnelIpv6PoolOutput

func (GetSettingsTunnelIpv6PoolArrayOutput) ToGetSettingsTunnelIpv6PoolArrayOutput 

func (o GetSettingsTunnelIpv6PoolArrayOutput) ToGetSettingsTunnelIpv6PoolArrayOutput() GetSettingsTunnelIpv6PoolArrayOutput

func (GetSettingsTunnelIpv6PoolArrayOutput) ToGetSettingsTunnelIpv6PoolArrayOutputWithContext 

func (o GetSettingsTunnelIpv6PoolArrayOutput) ToGetSettingsTunnelIpv6PoolArrayOutputWithContext(ctx context.Context) GetSettingsTunnelIpv6PoolArrayOutput

type GetSettingsTunnelIpv6PoolInput 

type GetSettingsTunnelIpv6PoolInput interface {
	pulumi.Input

	ToGetSettingsTunnelIpv6PoolOutput() GetSettingsTunnelIpv6PoolOutput
	ToGetSettingsTunnelIpv6PoolOutputWithContext(context.Context) GetSettingsTunnelIpv6PoolOutput
}

GetSettingsTunnelIpv6PoolInput is an input type that accepts GetSettingsTunnelIpv6PoolArgs and GetSettingsTunnelIpv6PoolOutput values. You can construct a concrete instance of `GetSettingsTunnelIpv6PoolInput` via: 

GetSettingsTunnelIpv6PoolArgs{...}

type GetSettingsTunnelIpv6PoolOutput 

type GetSettingsTunnelIpv6PoolOutput struct{ *pulumi.OutputState }

func (GetSettingsTunnelIpv6PoolOutput) ElementType 

func (GetSettingsTunnelIpv6PoolOutput) ElementType() reflect.Type

func (GetSettingsTunnelIpv6PoolOutput) Name 

func (o GetSettingsTunnelIpv6PoolOutput) Name() pulumi.StringOutput

Group name.

func (GetSettingsTunnelIpv6PoolOutput) ToGetSettingsTunnelIpv6PoolOutput 

func (o GetSettingsTunnelIpv6PoolOutput) ToGetSettingsTunnelIpv6PoolOutput() GetSettingsTunnelIpv6PoolOutput

func (GetSettingsTunnelIpv6PoolOutput) ToGetSettingsTunnelIpv6PoolOutputWithContext 

func (o GetSettingsTunnelIpv6PoolOutput) ToGetSettingsTunnelIpv6PoolOutputWithContext(ctx context.Context) GetSettingsTunnelIpv6PoolOutput

type LookupSettingsArgs 

type LookupSettingsArgs struct {
	// Specifies the vdom to which the data source will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
	Vdomparam *string `pulumi:"vdomparam"`
}

A collection of arguments for invoking getSettings.

type LookupSettingsOutputArgs 

type LookupSettingsOutputArgs struct {
	// Specifies the vdom to which the data source will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
	Vdomparam pulumi.StringPtrInput `pulumi:"vdomparam"`
}

A collection of arguments for invoking getSettings.

func (LookupSettingsOutputArgs) ElementType 

func (LookupSettingsOutputArgs) ElementType() reflect.Type

type LookupSettingsResult 

type LookupSettingsResult struct {
	// Force the SSL-VPN security level. High allows only high. Medium allows medium and high. Low allows any.
	Algorithm string `pulumi:"algorithm"`
	// Enable/disable checking of source IP for authentication session.
	AuthSessionCheckSourceIp string `pulumi:"authSessionCheckSourceIp"`
	// SSL-VPN authentication timeout (1 - 259200 sec (3 days), 0 for no timeout).
	AuthTimeout int `pulumi:"authTimeout"`
	// Authentication rule for SSL VPN. The structure of `authenticationRule` block is documented below.
	AuthenticationRules []GetSettingsAuthenticationRule `pulumi:"authenticationRules"`
	// Enable to auto-create static routes for the SSL-VPN tunnel IP addresses.
	AutoTunnelStaticRoute string `pulumi:"autoTunnelStaticRoute"`
	// Select one or more cipher technologies that cannot be used in SSL-VPN negotiations.
	BannedCipher string `pulumi:"bannedCipher"`
	// Enable/disable overriding the configured system language based on the preferred language of the browser.
	BrowserLanguageDetection string `pulumi:"browserLanguageDetection"`
	// Enable/disable verification of referer field in HTTP request header.
	CheckReferer string `pulumi:"checkReferer"`
	// Select one or more TLS 1.3 ciphersuites to enable. Does not affect ciphers in TLS 1.2 and below. At least one must be enabled. To disable all, set ssl-max-proto-ver to tls1-2 or below.
	Ciphersuite string `pulumi:"ciphersuite"`
	// Set signature algorithms related to client authentication. Affects TLS version <= 1.2 only.
	ClientSigalgs string `pulumi:"clientSigalgs"`
	// Default SSL VPN portal.
	DefaultPortal string `pulumi:"defaultPortal"`
	// Compression level (0~9).
	DeflateCompressionLevel int `pulumi:"deflateCompressionLevel"`
	// Minimum amount of data that triggers compression (200 - 65535 bytes).
	DeflateMinDataSize int `pulumi:"deflateMinDataSize"`
	// DNS server 1.
	DnsServer1 string `pulumi:"dnsServer1"`
	// DNS server 2.
	DnsServer2 string `pulumi:"dnsServer2"`
	// DNS suffix used for SSL-VPN clients.
	DnsSuffix string `pulumi:"dnsSuffix"`
	// Number of missing heartbeats before the connection is considered dropped.
	DtlsHeartbeatFailCount int `pulumi:"dtlsHeartbeatFailCount"`
	// Idle timeout before DTLS heartbeat is sent.
	DtlsHeartbeatIdleTimeout int `pulumi:"dtlsHeartbeatIdleTimeout"`
	// Interval between DTLS heartbeat.
	DtlsHeartbeatInterval int `pulumi:"dtlsHeartbeatInterval"`
	// SSLVPN maximum DTLS hello timeout (10 - 60 sec, default = 10).
	DtlsHelloTimeout int `pulumi:"dtlsHelloTimeout"`
	// DTLS maximum protocol version.
	DtlsMaxProtoVer string `pulumi:"dtlsMaxProtoVer"`
	// DTLS minimum protocol version.
	DtlsMinProtoVer string `pulumi:"dtlsMinProtoVer"`
	// Enable DTLS to prevent eavesdropping, tampering, or message forgery.
	DtlsTunnel string `pulumi:"dtlsTunnel"`
	// Tunnel mode: enable parallel IPv4 and IPv6 tunnel. Web mode: support IPv4 and IPv6 bookmarks in the portal.
	DualStackMode string `pulumi:"dualStackMode"`
	// Encode \2F sequence to forward slash in URLs.
	Encode2fSequence string `pulumi:"encode2fSequence"`
	// Encrypt and store user passwords for SSL-VPN web sessions.
	EncryptAndStorePassword string `pulumi:"encryptAndStorePassword"`
	// Enable to force two-factor authentication for all SSL-VPNs.
	ForceTwoFactorAuth string `pulumi:"forceTwoFactorAuth"`
	// Forward the same, add, or remove HTTP header.
	HeaderXForwardedFor string `pulumi:"headerXForwardedFor"`
	// Add HSTS includeSubDomains response header.
	HstsIncludeSubdomains string `pulumi:"hstsIncludeSubdomains"`
	// Enable to allow HTTP compression over SSL-VPN tunnels.
	HttpCompression string `pulumi:"httpCompression"`
	// Enable/disable SSL-VPN support for HttpOnly cookies.
	HttpOnlyCookie string `pulumi:"httpOnlyCookie"`
	// SSL-VPN session is disconnected if an HTTP request body is not received within this time (1 - 60 sec, default = 20).
	HttpRequestBodyTimeout int `pulumi:"httpRequestBodyTimeout"`
	// SSL-VPN session is disconnected if an HTTP request header is not received within this time (1 - 60 sec, default = 20).
	HttpRequestHeaderTimeout int `pulumi:"httpRequestHeaderTimeout"`
	// Enable/disable redirect of port 80 to SSL-VPN port.
	HttpsRedirect string `pulumi:"httpsRedirect"`
	// The provider-assigned unique ID for this managed resource.
	Id string `pulumi:"id"`
	// SSL VPN disconnects if idle for specified time in seconds.
	IdleTimeout int `pulumi:"idleTimeout"`
	// IPv6 DNS server 1.
	Ipv6DnsServer1 string `pulumi:"ipv6DnsServer1"`
	// IPv6 DNS server 2.
	Ipv6DnsServer2 string `pulumi:"ipv6DnsServer2"`
	// IPv6 WINS server 1.
	Ipv6WinsServer1 string `pulumi:"ipv6WinsServer1"`
	// IPv6 WINS server 2.
	Ipv6WinsServer2 string `pulumi:"ipv6WinsServer2"`
	// SSL VPN maximum login attempt times before block (0 - 10, default = 2, 0 = no limit).
	LoginAttemptLimit int `pulumi:"loginAttemptLimit"`
	// Time for which a user is blocked from logging in after too many failed login attempts (0 - 86400 sec, default = 60).
	LoginBlockTime int `pulumi:"loginBlockTime"`
	// SSLVPN maximum login timeout (10 - 180 sec, default = 30).
	LoginTimeout int `pulumi:"loginTimeout"`
	// SSL-VPN access port (1 - 65535).
	Port int `pulumi:"port"`
	// Enable means that if SSL-VPN connections are allowed on an interface admin GUI connections are blocked on that interface.
	PortPrecedence string `pulumi:"portPrecedence"`
	// Enable to require client certificates for all SSL-VPN users.
	Reqclientcert string `pulumi:"reqclientcert"`
	// Enable to allow SSL-VPN sessions to bypass routing and bind to the incoming interface.
	RouteSourceInterface string `pulumi:"routeSourceInterface"`
	// SAML local redirect port in the machine running FCT (0 - 65535). 0 is to disable redirection on FGT side.
	SamlRedirectPort int `pulumi:"samlRedirectPort"`
	// Server hostname for HTTPS. When set, will be used for SSL VPN web proxy host header for any redirection.
	ServerHostname string `pulumi:"serverHostname"`
	// Name of the server certificate to be used for SSL-VPNs.
	Servercert string `pulumi:"servercert"`
	// Enable/disable negated source IPv6 address match.
	SourceAddress6Negate string `pulumi:"sourceAddress6Negate"`
	// IPv6 source address of incoming traffic. The structure of `sourceAddress6` block is documented below.
	SourceAddress6s []GetSettingsSourceAddress6 `pulumi:"sourceAddress6s"`
	// Enable/disable negated source address match.
	SourceAddressNegate string `pulumi:"sourceAddressNegate"`
	// Source address of incoming traffic. The structure of `sourceAddress` block is documented below.
	SourceAddresses []GetSettingsSourceAddress `pulumi:"sourceAddresses"`
	// SSL VPN source interface of incoming traffic. The structure of `sourceInterface` block is documented below.
	SourceInterfaces []GetSettingsSourceInterface `pulumi:"sourceInterfaces"`
	// Enable to allow client renegotiation by the server if the tunnel goes down.
	SslClientRenegotiation string `pulumi:"sslClientRenegotiation"`
	// Enable/disable insertion of empty fragment.
	SslInsertEmptyFragment string `pulumi:"sslInsertEmptyFragment"`
	// SSL maximum protocol version.
	SslMaxProtoVer string `pulumi:"sslMaxProtoVer"`
	// SSL minimum protocol version.
	SslMinProtoVer string `pulumi:"sslMinProtoVer"`
	// Enable/disable SSL-VPN.
	Status string `pulumi:"status"`
	// Enable/disable TLSv1.0.
	Tlsv10 string `pulumi:"tlsv10"`
	// Enable/disable TLSv1.1.
	Tlsv11 string `pulumi:"tlsv11"`
	// Enable/disable TLSv1.2.
	Tlsv12 string `pulumi:"tlsv12"`
	// Enable/disable TLSv1.3.
	Tlsv13 string `pulumi:"tlsv13"`
	// Transform backward slashes to forward slashes in URLs.
	TransformBackwardSlashes string `pulumi:"transformBackwardSlashes"`
	// Method used for assigning address for tunnel.
	TunnelAddrAssignedMethod string `pulumi:"tunnelAddrAssignedMethod"`
	// Enable/disable tunnel connection without re-authorization if previous connection dropped.
	TunnelConnectWithoutReauth string `pulumi:"tunnelConnectWithoutReauth"`
	// Names of the IPv4 IP Pool firewall objects that define the IP addresses reserved for remote clients. The structure of `tunnelIpPools` block is documented below.
	TunnelIpPools []GetSettingsTunnelIpPool `pulumi:"tunnelIpPools"`
	// Names of the IPv6 IP Pool firewall objects that define the IP addresses reserved for remote clients. The structure of `tunnelIpv6Pools` block is documented below.
	TunnelIpv6Pools []GetSettingsTunnelIpv6Pool `pulumi:"tunnelIpv6Pools"`
	// Time out value to clean up user session after tunnel connection is dropped (1 - 255 sec, default=30).
	TunnelUserSessionTimeout int `pulumi:"tunnelUserSessionTimeout"`
	// Enable/disable unsafe legacy re-negotiation.
	UnsafeLegacyRenegotiation string `pulumi:"unsafeLegacyRenegotiation"`
	// Enable to obscure the host name of the URL of the web browser display.
	UrlObscuration string `pulumi:"urlObscuration"`
	// Name of user peer.
	UserPeer  string  `pulumi:"userPeer"`
	Vdomparam *string `pulumi:"vdomparam"`
	// Enable/disable use of IP pools defined in firewall policy while using web-mode.
	WebModeSnat string `pulumi:"webModeSnat"`
	// WINS server 1.
	WinsServer1 string `pulumi:"winsServer1"`
	// WINS server 2.
	WinsServer2 string `pulumi:"winsServer2"`
	// Add HTTP X-Content-Type-Options header.
	XContentTypeOptions string `pulumi:"xContentTypeOptions"`
	// Enable/disable verification of device certificate for SSLVPN ZTNA session.
	ZtnaTrustedClient string `pulumi:"ztnaTrustedClient"`
}

A collection of values returned by getSettings.

func LookupSettings 

func LookupSettings(ctx *pulumi.Context, args *LookupSettingsArgs, opts ...pulumi.InvokeOption) (*LookupSettingsResult, error)

Use this data source to get information on fortios vpnssl settings

type LookupSettingsResultOutput 

type LookupSettingsResultOutput struct{ *pulumi.OutputState }

A collection of values returned by getSettings.

func LookupSettingsOutput 

func LookupSettingsOutput(ctx *pulumi.Context, args LookupSettingsOutputArgs, opts ...pulumi.InvokeOption) LookupSettingsResultOutput

func (LookupSettingsResultOutput) Algorithm 

func (o LookupSettingsResultOutput) Algorithm() pulumi.StringOutput

Force the SSL-VPN security level. High allows only high. Medium allows medium and high. Low allows any.

func (LookupSettingsResultOutput) AuthSessionCheckSourceIp 

func (o LookupSettingsResultOutput) AuthSessionCheckSourceIp() pulumi.StringOutput

Enable/disable checking of source IP for authentication session.

func (LookupSettingsResultOutput) AuthTimeout 

func (o LookupSettingsResultOutput) AuthTimeout() pulumi.IntOutput

SSL-VPN authentication timeout (1 - 259200 sec (3 days), 0 for no timeout).

func (LookupSettingsResultOutput) AuthenticationRules 

func (o LookupSettingsResultOutput) AuthenticationRules() GetSettingsAuthenticationRuleArrayOutput

Authentication rule for SSL VPN. The structure of `authenticationRule` block is documented below.

func (LookupSettingsResultOutput) AutoTunnelStaticRoute 

func (o LookupSettingsResultOutput) AutoTunnelStaticRoute() pulumi.StringOutput

Enable to auto-create static routes for the SSL-VPN tunnel IP addresses.

func (LookupSettingsResultOutput) BannedCipher 

func (o LookupSettingsResultOutput) BannedCipher() pulumi.StringOutput

Select one or more cipher technologies that cannot be used in SSL-VPN negotiations.

func (LookupSettingsResultOutput) BrowserLanguageDetection 

func (o LookupSettingsResultOutput) BrowserLanguageDetection() pulumi.StringOutput

Enable/disable overriding the configured system language based on the preferred language of the browser.

func (LookupSettingsResultOutput) CheckReferer 

func (o LookupSettingsResultOutput) CheckReferer() pulumi.StringOutput

Enable/disable verification of referer field in HTTP request header.

func (LookupSettingsResultOutput) Ciphersuite 

func (o LookupSettingsResultOutput) Ciphersuite() pulumi.StringOutput

Select one or more TLS 1.3 ciphersuites to enable. Does not affect ciphers in TLS 1.2 and below. At least one must be enabled. To disable all, set ssl-max-proto-ver to tls1-2 or below.

func (LookupSettingsResultOutput) ClientSigalgs 

func (o LookupSettingsResultOutput) ClientSigalgs() pulumi.StringOutput

Set signature algorithms related to client authentication. Affects TLS version <= 1.2 only.

func (LookupSettingsResultOutput) DefaultPortal 

func (o LookupSettingsResultOutput) DefaultPortal() pulumi.StringOutput

Default SSL VPN portal.

func (LookupSettingsResultOutput) DeflateCompressionLevel 

func (o LookupSettingsResultOutput) DeflateCompressionLevel() pulumi.IntOutput

Compression level (0~9).

func (LookupSettingsResultOutput) DeflateMinDataSize 

func (o LookupSettingsResultOutput) DeflateMinDataSize() pulumi.IntOutput

Minimum amount of data that triggers compression (200 - 65535 bytes).

func (LookupSettingsResultOutput) DnsServer1 

func (o LookupSettingsResultOutput) DnsServer1() pulumi.StringOutput

DNS server 1.

func (LookupSettingsResultOutput) DnsServer2 

func (o LookupSettingsResultOutput) DnsServer2() pulumi.StringOutput

DNS server 2.

func (LookupSettingsResultOutput) DnsSuffix 

func (o LookupSettingsResultOutput) DnsSuffix() pulumi.StringOutput

DNS suffix used for SSL-VPN clients.

func (LookupSettingsResultOutput) DtlsHeartbeatFailCount 

func (o LookupSettingsResultOutput) DtlsHeartbeatFailCount() pulumi.IntOutput

Number of missing heartbeats before the connection is considered dropped.

func (LookupSettingsResultOutput) DtlsHeartbeatIdleTimeout 

func (o LookupSettingsResultOutput) DtlsHeartbeatIdleTimeout() pulumi.IntOutput

Idle timeout before DTLS heartbeat is sent.

func (LookupSettingsResultOutput) DtlsHeartbeatInterval 

func (o LookupSettingsResultOutput) DtlsHeartbeatInterval() pulumi.IntOutput

Interval between DTLS heartbeat.

func (LookupSettingsResultOutput) DtlsHelloTimeout 

func (o LookupSettingsResultOutput) DtlsHelloTimeout() pulumi.IntOutput

SSLVPN maximum DTLS hello timeout (10 - 60 sec, default = 10).

func (LookupSettingsResultOutput) DtlsMaxProtoVer 

func (o LookupSettingsResultOutput) DtlsMaxProtoVer() pulumi.StringOutput

DTLS maximum protocol version.

func (LookupSettingsResultOutput) DtlsMinProtoVer 

func (o LookupSettingsResultOutput) DtlsMinProtoVer() pulumi.StringOutput

DTLS minimum protocol version.

func (LookupSettingsResultOutput) DtlsTunnel 

func (o LookupSettingsResultOutput) DtlsTunnel() pulumi.StringOutput

Enable DTLS to prevent eavesdropping, tampering, or message forgery.

func (LookupSettingsResultOutput) DualStackMode 

func (o LookupSettingsResultOutput) DualStackMode() pulumi.StringOutput

Tunnel mode: enable parallel IPv4 and IPv6 tunnel. Web mode: support IPv4 and IPv6 bookmarks in the portal.

func (LookupSettingsResultOutput) ElementType 

func (LookupSettingsResultOutput) ElementType() reflect.Type

func (LookupSettingsResultOutput) Encode2fSequence 

func (o LookupSettingsResultOutput) Encode2fSequence() pulumi.StringOutput

Encode \2F sequence to forward slash in URLs.

func (LookupSettingsResultOutput) EncryptAndStorePassword 

func (o LookupSettingsResultOutput) EncryptAndStorePassword() pulumi.StringOutput

Encrypt and store user passwords for SSL-VPN web sessions.

func (LookupSettingsResultOutput) ForceTwoFactorAuth 

func (o LookupSettingsResultOutput) ForceTwoFactorAuth() pulumi.StringOutput

Enable to force two-factor authentication for all SSL-VPNs.

func (LookupSettingsResultOutput) HeaderXForwardedFor 

func (o LookupSettingsResultOutput) HeaderXForwardedFor() pulumi.StringOutput

Forward the same, add, or remove HTTP header.

func (LookupSettingsResultOutput) HstsIncludeSubdomains 

func (o LookupSettingsResultOutput) HstsIncludeSubdomains() pulumi.StringOutput

Add HSTS includeSubDomains response header.

func (LookupSettingsResultOutput) HttpCompression 

func (o LookupSettingsResultOutput) HttpCompression() pulumi.StringOutput

Enable to allow HTTP compression over SSL-VPN tunnels.

func (LookupSettingsResultOutput) HttpOnlyCookie 

func (o LookupSettingsResultOutput) HttpOnlyCookie() pulumi.StringOutput

Enable/disable SSL-VPN support for HttpOnly cookies.

func (LookupSettingsResultOutput) HttpRequestBodyTimeout 

func (o LookupSettingsResultOutput) HttpRequestBodyTimeout() pulumi.IntOutput

SSL-VPN session is disconnected if an HTTP request body is not received within this time (1 - 60 sec, default = 20).

func (LookupSettingsResultOutput) HttpRequestHeaderTimeout 

func (o LookupSettingsResultOutput) HttpRequestHeaderTimeout() pulumi.IntOutput

SSL-VPN session is disconnected if an HTTP request header is not received within this time (1 - 60 sec, default = 20).

func (LookupSettingsResultOutput) HttpsRedirect 

func (o LookupSettingsResultOutput) HttpsRedirect() pulumi.StringOutput

Enable/disable redirect of port 80 to SSL-VPN port.

func (LookupSettingsResultOutput) Id 

func (o LookupSettingsResultOutput) Id() pulumi.StringOutput

The provider-assigned unique ID for this managed resource.

func (LookupSettingsResultOutput) IdleTimeout 

func (o LookupSettingsResultOutput) IdleTimeout() pulumi.IntOutput

SSL VPN disconnects if idle for specified time in seconds.

func (LookupSettingsResultOutput) Ipv6DnsServer1 

func (o LookupSettingsResultOutput) Ipv6DnsServer1() pulumi.StringOutput

IPv6 DNS server 1.

func (LookupSettingsResultOutput) Ipv6DnsServer2 

func (o LookupSettingsResultOutput) Ipv6DnsServer2() pulumi.StringOutput

IPv6 DNS server 2.

func (LookupSettingsResultOutput) Ipv6WinsServer1 

func (o LookupSettingsResultOutput) Ipv6WinsServer1() pulumi.StringOutput

IPv6 WINS server 1.

func (LookupSettingsResultOutput) Ipv6WinsServer2 

func (o LookupSettingsResultOutput) Ipv6WinsServer2() pulumi.StringOutput

IPv6 WINS server 2.

func (LookupSettingsResultOutput) LoginAttemptLimit 

func (o LookupSettingsResultOutput) LoginAttemptLimit() pulumi.IntOutput

SSL VPN maximum login attempt times before block (0 - 10, default = 2, 0 = no limit).

func (LookupSettingsResultOutput) LoginBlockTime 

func (o LookupSettingsResultOutput) LoginBlockTime() pulumi.IntOutput

Time for which a user is blocked from logging in after too many failed login attempts (0 - 86400 sec, default = 60).

func (LookupSettingsResultOutput) LoginTimeout 

func (o LookupSettingsResultOutput) LoginTimeout() pulumi.IntOutput

SSLVPN maximum login timeout (10 - 180 sec, default = 30).

func (LookupSettingsResultOutput) Port 

func (o LookupSettingsResultOutput) Port() pulumi.IntOutput

SSL-VPN access port (1 - 65535).

func (LookupSettingsResultOutput) PortPrecedence 

func (o LookupSettingsResultOutput) PortPrecedence() pulumi.StringOutput

Enable means that if SSL-VPN connections are allowed on an interface admin GUI connections are blocked on that interface.

func (LookupSettingsResultOutput) Reqclientcert 

func (o LookupSettingsResultOutput) Reqclientcert() pulumi.StringOutput

Enable to require client certificates for all SSL-VPN users.

func (LookupSettingsResultOutput) RouteSourceInterface 

func (o LookupSettingsResultOutput) RouteSourceInterface() pulumi.StringOutput

Enable to allow SSL-VPN sessions to bypass routing and bind to the incoming interface.

func (LookupSettingsResultOutput) SamlRedirectPort 

func (o LookupSettingsResultOutput) SamlRedirectPort() pulumi.IntOutput

SAML local redirect port in the machine running FCT (0 - 65535). 0 is to disable redirection on FGT side.

func (LookupSettingsResultOutput) ServerHostname 

func (o LookupSettingsResultOutput) ServerHostname() pulumi.StringOutput

Server hostname for HTTPS. When set, will be used for SSL VPN web proxy host header for any redirection.

func (LookupSettingsResultOutput) Servercert 

func (o LookupSettingsResultOutput) Servercert() pulumi.StringOutput

Name of the server certificate to be used for SSL-VPNs.

func (LookupSettingsResultOutput) SourceAddress6Negate 

func (o LookupSettingsResultOutput) SourceAddress6Negate() pulumi.StringOutput

Enable/disable negated source IPv6 address match.

func (LookupSettingsResultOutput) SourceAddress6s 

func (o LookupSettingsResultOutput) SourceAddress6s() GetSettingsSourceAddress6ArrayOutput

IPv6 source address of incoming traffic. The structure of `sourceAddress6` block is documented below.

func (LookupSettingsResultOutput) SourceAddressNegate 

func (o LookupSettingsResultOutput) SourceAddressNegate() pulumi.StringOutput

Enable/disable negated source address match.

func (LookupSettingsResultOutput) SourceAddresses 

func (o LookupSettingsResultOutput) SourceAddresses() GetSettingsSourceAddressArrayOutput

Source address of incoming traffic. The structure of `sourceAddress` block is documented below.

func (LookupSettingsResultOutput) SourceInterfaces 

func (o LookupSettingsResultOutput) SourceInterfaces() GetSettingsSourceInterfaceArrayOutput

SSL VPN source interface of incoming traffic. The structure of `sourceInterface` block is documented below.

func (LookupSettingsResultOutput) SslClientRenegotiation 

func (o LookupSettingsResultOutput) SslClientRenegotiation() pulumi.StringOutput

Enable to allow client renegotiation by the server if the tunnel goes down.

func (LookupSettingsResultOutput) SslInsertEmptyFragment 

func (o LookupSettingsResultOutput) SslInsertEmptyFragment() pulumi.StringOutput

Enable/disable insertion of empty fragment.

func (LookupSettingsResultOutput) SslMaxProtoVer 

func (o LookupSettingsResultOutput) SslMaxProtoVer() pulumi.StringOutput

SSL maximum protocol version.

func (LookupSettingsResultOutput) SslMinProtoVer 

func (o LookupSettingsResultOutput) SslMinProtoVer() pulumi.StringOutput

SSL minimum protocol version.

func (LookupSettingsResultOutput) Status 

func (o LookupSettingsResultOutput) Status() pulumi.StringOutput

Enable/disable SSL-VPN.

func (LookupSettingsResultOutput) Tlsv10 

func (o LookupSettingsResultOutput) Tlsv10() pulumi.StringOutput

Enable/disable TLSv1.0.

func (LookupSettingsResultOutput) Tlsv11 

func (o LookupSettingsResultOutput) Tlsv11() pulumi.StringOutput

Enable/disable TLSv1.1.

func (LookupSettingsResultOutput) Tlsv12 

func (o LookupSettingsResultOutput) Tlsv12() pulumi.StringOutput

Enable/disable TLSv1.2.

func (LookupSettingsResultOutput) Tlsv13 

func (o LookupSettingsResultOutput) Tlsv13() pulumi.StringOutput

Enable/disable TLSv1.3.

func (LookupSettingsResultOutput) ToLookupSettingsResultOutput 

func (o LookupSettingsResultOutput) ToLookupSettingsResultOutput() LookupSettingsResultOutput

func (LookupSettingsResultOutput) ToLookupSettingsResultOutputWithContext 

func (o LookupSettingsResultOutput) ToLookupSettingsResultOutputWithContext(ctx context.Context) LookupSettingsResultOutput

func (LookupSettingsResultOutput) TransformBackwardSlashes 

func (o LookupSettingsResultOutput) TransformBackwardSlashes() pulumi.StringOutput

Transform backward slashes to forward slashes in URLs.

func (LookupSettingsResultOutput) TunnelAddrAssignedMethod 

func (o LookupSettingsResultOutput) TunnelAddrAssignedMethod() pulumi.StringOutput

Method used for assigning address for tunnel.

func (LookupSettingsResultOutput) TunnelConnectWithoutReauth 

func (o LookupSettingsResultOutput) TunnelConnectWithoutReauth() pulumi.StringOutput

Enable/disable tunnel connection without re-authorization if previous connection dropped.

func (LookupSettingsResultOutput) TunnelIpPools 

func (o LookupSettingsResultOutput) TunnelIpPools() GetSettingsTunnelIpPoolArrayOutput

Names of the IPv4 IP Pool firewall objects that define the IP addresses reserved for remote clients. The structure of `tunnelIpPools` block is documented below.

func (LookupSettingsResultOutput) TunnelIpv6Pools 

func (o LookupSettingsResultOutput) TunnelIpv6Pools() GetSettingsTunnelIpv6PoolArrayOutput

Names of the IPv6 IP Pool firewall objects that define the IP addresses reserved for remote clients. The structure of `tunnelIpv6Pools` block is documented below.

func (LookupSettingsResultOutput) TunnelUserSessionTimeout 

func (o LookupSettingsResultOutput) TunnelUserSessionTimeout() pulumi.IntOutput

Time out value to clean up user session after tunnel connection is dropped (1 - 255 sec, default=30).

func (LookupSettingsResultOutput) UnsafeLegacyRenegotiation 

func (o LookupSettingsResultOutput) UnsafeLegacyRenegotiation() pulumi.StringOutput

Enable/disable unsafe legacy re-negotiation.

func (LookupSettingsResultOutput) UrlObscuration 

func (o LookupSettingsResultOutput) UrlObscuration() pulumi.StringOutput

Enable to obscure the host name of the URL of the web browser display.

func (LookupSettingsResultOutput) UserPeer 

func (o LookupSettingsResultOutput) UserPeer() pulumi.StringOutput

Name of user peer.

func (LookupSettingsResultOutput) Vdomparam 

func (o LookupSettingsResultOutput) Vdomparam() pulumi.StringPtrOutput

func (LookupSettingsResultOutput) WebModeSnat 

func (o LookupSettingsResultOutput) WebModeSnat() pulumi.StringOutput

Enable/disable use of IP pools defined in firewall policy while using web-mode.

func (LookupSettingsResultOutput) WinsServer1 

func (o LookupSettingsResultOutput) WinsServer1() pulumi.StringOutput

WINS server 1.

func (LookupSettingsResultOutput) WinsServer2 

func (o LookupSettingsResultOutput) WinsServer2() pulumi.StringOutput

WINS server 2.

func (LookupSettingsResultOutput) XContentTypeOptions 

func (o LookupSettingsResultOutput) XContentTypeOptions() pulumi.StringOutput

Add HTTP X-Content-Type-Options header.

func (LookupSettingsResultOutput) ZtnaTrustedClient 

func (o LookupSettingsResultOutput) ZtnaTrustedClient() pulumi.StringOutput

Enable/disable verification of device certificate for SSLVPN ZTNA session.

type Settings 

type Settings struct {
	pulumi.CustomResourceState

	// Force the SSL-VPN security level. High allows only high. Medium allows medium and high. Low allows any. Valid values: `high`, `medium`, `default`, `low`.
	Algorithm pulumi.StringOutput `pulumi:"algorithm"`
	// Enable/disable checking of source IP for authentication session. Valid values: `enable`, `disable`.
	AuthSessionCheckSourceIp pulumi.StringOutput `pulumi:"authSessionCheckSourceIp"`
	// SSL-VPN authentication timeout (1 - 259200 sec (3 days), 0 for no timeout).
	AuthTimeout pulumi.IntOutput `pulumi:"authTimeout"`
	// Authentication rule for SSL VPN. The structure of `authenticationRule` block is documented below.
	AuthenticationRules SettingsAuthenticationRuleArrayOutput `pulumi:"authenticationRules"`
	// Enable to auto-create static routes for the SSL-VPN tunnel IP addresses. Valid values: `enable`, `disable`.
	AutoTunnelStaticRoute pulumi.StringOutput `pulumi:"autoTunnelStaticRoute"`
	// Select one or more cipher technologies that cannot be used in SSL-VPN negotiations.
	BannedCipher pulumi.StringOutput `pulumi:"bannedCipher"`
	// Enable/disable overriding the configured system language based on the preferred language of the browser. Valid values: `enable`, `disable`.
	BrowserLanguageDetection pulumi.StringOutput `pulumi:"browserLanguageDetection"`
	// Enable/disable verification of referer field in HTTP request header. Valid values: `enable`, `disable`.
	CheckReferer pulumi.StringOutput `pulumi:"checkReferer"`
	// Select one or more TLS 1.3 ciphersuites to enable. Does not affect ciphers in TLS 1.2 and below. At least one must be enabled. To disable all, set ssl-max-proto-ver to tls1-2 or below. Valid values: `TLS-AES-128-GCM-SHA256`, `TLS-AES-256-GCM-SHA384`, `TLS-CHACHA20-POLY1305-SHA256`, `TLS-AES-128-CCM-SHA256`, `TLS-AES-128-CCM-8-SHA256`.
	Ciphersuite pulumi.StringOutput `pulumi:"ciphersuite"`
	// Set signature algorithms related to client authentication. Affects TLS version <= 1.2 only. Valid values: `no-rsa-pss`, `all`.
	ClientSigalgs pulumi.StringOutput `pulumi:"clientSigalgs"`
	// Default SSL VPN portal.
	DefaultPortal pulumi.StringOutput `pulumi:"defaultPortal"`
	// Compression level (0~9).
	DeflateCompressionLevel pulumi.IntOutput `pulumi:"deflateCompressionLevel"`
	// Minimum amount of data that triggers compression (200 - 65535 bytes).
	DeflateMinDataSize pulumi.IntOutput `pulumi:"deflateMinDataSize"`
	// DNS server 1.
	DnsServer1 pulumi.StringOutput `pulumi:"dnsServer1"`
	// DNS server 2.
	DnsServer2 pulumi.StringOutput `pulumi:"dnsServer2"`
	// DNS suffix used for SSL-VPN clients.
	DnsSuffix pulumi.StringPtrOutput `pulumi:"dnsSuffix"`
	// Number of missing heartbeats before the connection is considered dropped.
	DtlsHeartbeatFailCount pulumi.IntOutput `pulumi:"dtlsHeartbeatFailCount"`
	// Idle timeout before DTLS heartbeat is sent.
	DtlsHeartbeatIdleTimeout pulumi.IntOutput `pulumi:"dtlsHeartbeatIdleTimeout"`
	// Interval between DTLS heartbeat.
	DtlsHeartbeatInterval pulumi.IntOutput `pulumi:"dtlsHeartbeatInterval"`
	// SSLVPN maximum DTLS hello timeout (10 - 60 sec, default = 10).
	DtlsHelloTimeout pulumi.IntOutput `pulumi:"dtlsHelloTimeout"`
	// DTLS maximum protocol version. Valid values: `dtls1-0`, `dtls1-2`.
	DtlsMaxProtoVer pulumi.StringOutput `pulumi:"dtlsMaxProtoVer"`
	// DTLS minimum protocol version. Valid values: `dtls1-0`, `dtls1-2`.
	DtlsMinProtoVer pulumi.StringOutput `pulumi:"dtlsMinProtoVer"`
	// Enable DTLS to prevent eavesdropping, tampering, or message forgery. Valid values: `enable`, `disable`.
	DtlsTunnel pulumi.StringOutput `pulumi:"dtlsTunnel"`
	// Tunnel mode: enable parallel IPv4 and IPv6 tunnel. Web mode: support IPv4 and IPv6 bookmarks in the portal. Valid values: `enable`, `disable`.
	DualStackMode pulumi.StringOutput `pulumi:"dualStackMode"`
	// Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
	DynamicSortSubtable pulumi.StringPtrOutput `pulumi:"dynamicSortSubtable"`
	// Encode \2F sequence to forward slash in URLs. Valid values: `enable`, `disable`.
	Encode2fSequence pulumi.StringOutput `pulumi:"encode2fSequence"`
	// Encrypt and store user passwords for SSL-VPN web sessions. Valid values: `enable`, `disable`.
	EncryptAndStorePassword pulumi.StringOutput `pulumi:"encryptAndStorePassword"`
	// Enable to force two-factor authentication for all SSL-VPNs. Valid values: `enable`, `disable`.
	ForceTwoFactorAuth pulumi.StringOutput `pulumi:"forceTwoFactorAuth"`
	// Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwish conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
	GetAllTables pulumi.StringPtrOutput `pulumi:"getAllTables"`
	// Forward the same, add, or remove HTTP header. Valid values: `pass`, `add`, `remove`.
	HeaderXForwardedFor pulumi.StringOutput `pulumi:"headerXForwardedFor"`
	// Add HSTS includeSubDomains response header. Valid values: `enable`, `disable`.
	HstsIncludeSubdomains pulumi.StringOutput `pulumi:"hstsIncludeSubdomains"`
	// Enable to allow HTTP compression over SSL-VPN tunnels. Valid values: `enable`, `disable`.
	HttpCompression pulumi.StringOutput `pulumi:"httpCompression"`
	// Enable/disable SSL-VPN support for HttpOnly cookies. Valid values: `enable`, `disable`.
	HttpOnlyCookie pulumi.StringOutput `pulumi:"httpOnlyCookie"`
	// SSL-VPN session is disconnected if an HTTP request body is not received within this time (1 - 60 sec, default = 20).
	HttpRequestBodyTimeout pulumi.IntOutput `pulumi:"httpRequestBodyTimeout"`
	// SSL-VPN session is disconnected if an HTTP request header is not received within this time (1 - 60 sec, default = 20).
	HttpRequestHeaderTimeout pulumi.IntOutput `pulumi:"httpRequestHeaderTimeout"`
	// Enable/disable redirect of port 80 to SSL-VPN port. Valid values: `enable`, `disable`.
	HttpsRedirect pulumi.StringOutput `pulumi:"httpsRedirect"`
	// SSL VPN disconnects if idle for specified time in seconds.
	IdleTimeout pulumi.IntOutput `pulumi:"idleTimeout"`
	// IPv6 DNS server 1.
	Ipv6DnsServer1 pulumi.StringOutput `pulumi:"ipv6DnsServer1"`
	// IPv6 DNS server 2.
	Ipv6DnsServer2 pulumi.StringOutput `pulumi:"ipv6DnsServer2"`
	// IPv6 WINS server 1.
	Ipv6WinsServer1 pulumi.StringOutput `pulumi:"ipv6WinsServer1"`
	// IPv6 WINS server 2.
	Ipv6WinsServer2 pulumi.StringOutput `pulumi:"ipv6WinsServer2"`
	// SSL VPN maximum login attempt times before block (0 - 10, default = 2, 0 = no limit).
	LoginAttemptLimit pulumi.IntOutput `pulumi:"loginAttemptLimit"`
	// Time for which a user is blocked from logging in after too many failed login attempts (0 - 86400 sec, default = 60).
	LoginBlockTime pulumi.IntOutput `pulumi:"loginBlockTime"`
	// SSLVPN maximum login timeout (10 - 180 sec, default = 30).
	LoginTimeout pulumi.IntOutput `pulumi:"loginTimeout"`
	// SSL-VPN access port (1 - 65535).
	Port pulumi.IntOutput `pulumi:"port"`
	// Enable means that if SSL-VPN connections are allowed on an interface admin GUI connections are blocked on that interface. Valid values: `enable`, `disable`.
	PortPrecedence pulumi.StringOutput `pulumi:"portPrecedence"`
	// Enable to require client certificates for all SSL-VPN users. Valid values: `enable`, `disable`.
	Reqclientcert pulumi.StringOutput `pulumi:"reqclientcert"`
	// Enable to allow SSL-VPN sessions to bypass routing and bind to the incoming interface. Valid values: `enable`, `disable`.
	RouteSourceInterface pulumi.StringOutput `pulumi:"routeSourceInterface"`
	// SAML local redirect port in the machine running FCT (0 - 65535). 0 is to disable redirection on FGT side.
	SamlRedirectPort pulumi.IntOutput `pulumi:"samlRedirectPort"`
	// Server hostname for HTTPS. When set, will be used for SSL VPN web proxy host header for any redirection.
	ServerHostname pulumi.StringOutput `pulumi:"serverHostname"`
	// Name of the server certificate to be used for SSL-VPNs.
	Servercert pulumi.StringOutput `pulumi:"servercert"`
	// Enable/disable negated source IPv6 address match. Valid values: `enable`, `disable`.
	SourceAddress6Negate pulumi.StringOutput `pulumi:"sourceAddress6Negate"`
	// IPv6 source address of incoming traffic. The structure of `sourceAddress6` block is documented below.
	SourceAddress6s SettingsSourceAddress6ArrayOutput `pulumi:"sourceAddress6s"`
	// Enable/disable negated source address match. Valid values: `enable`, `disable`.
	SourceAddressNegate pulumi.StringOutput `pulumi:"sourceAddressNegate"`
	// Source address of incoming traffic. The structure of `sourceAddress` block is documented below.
	SourceAddresses SettingsSourceAddressArrayOutput `pulumi:"sourceAddresses"`
	// SSL VPN source interface of incoming traffic. The structure of `sourceInterface` block is documented below.
	SourceInterfaces SettingsSourceInterfaceArrayOutput `pulumi:"sourceInterfaces"`
	// Enable to allow client renegotiation by the server if the tunnel goes down. Valid values: `disable`, `enable`.
	SslClientRenegotiation pulumi.StringOutput `pulumi:"sslClientRenegotiation"`
	// Enable/disable insertion of empty fragment. Valid values: `enable`, `disable`.
	SslInsertEmptyFragment pulumi.StringOutput `pulumi:"sslInsertEmptyFragment"`
	// SSL maximum protocol version. Valid values: `tls1-0`, `tls1-1`, `tls1-2`, `tls1-3`.
	SslMaxProtoVer pulumi.StringOutput `pulumi:"sslMaxProtoVer"`
	// SSL minimum protocol version. Valid values: `tls1-0`, `tls1-1`, `tls1-2`, `tls1-3`.
	SslMinProtoVer pulumi.StringOutput `pulumi:"sslMinProtoVer"`
	// Enable/disable SSL-VPN. Valid values: `enable`, `disable`.
	Status pulumi.StringOutput `pulumi:"status"`
	// Enable/disable TLSv1.0. Valid values: `enable`, `disable`.
	Tlsv10 pulumi.StringOutput `pulumi:"tlsv10"`
	// Enable/disable TLSv1.1. Valid values: `enable`, `disable`.
	Tlsv11 pulumi.StringOutput `pulumi:"tlsv11"`
	// Enable/disable TLSv1.2. Valid values: `enable`, `disable`.
	Tlsv12 pulumi.StringOutput `pulumi:"tlsv12"`
	// Enable/disable TLSv1.3. Valid values: `enable`, `disable`.
	Tlsv13 pulumi.StringOutput `pulumi:"tlsv13"`
	// Transform backward slashes to forward slashes in URLs. Valid values: `enable`, `disable`.
	TransformBackwardSlashes pulumi.StringOutput `pulumi:"transformBackwardSlashes"`
	// Method used for assigning address for tunnel. Valid values: `first-available`, `round-robin`.
	TunnelAddrAssignedMethod pulumi.StringOutput `pulumi:"tunnelAddrAssignedMethod"`
	// Enable/disable tunnel connection without re-authorization if previous connection dropped. Valid values: `enable`, `disable`.
	TunnelConnectWithoutReauth pulumi.StringOutput `pulumi:"tunnelConnectWithoutReauth"`
	// Names of the IPv4 IP Pool firewall objects that define the IP addresses reserved for remote clients. The structure of `tunnelIpPools` block is documented below.
	TunnelIpPools SettingsTunnelIpPoolArrayOutput `pulumi:"tunnelIpPools"`
	// Names of the IPv6 IP Pool firewall objects that define the IP addresses reserved for remote clients. The structure of `tunnelIpv6Pools` block is documented below.
	TunnelIpv6Pools SettingsTunnelIpv6PoolArrayOutput `pulumi:"tunnelIpv6Pools"`
	// Time out value to clean up user session after tunnel connection is dropped (1 - 255 sec, default=30).
	TunnelUserSessionTimeout pulumi.IntOutput `pulumi:"tunnelUserSessionTimeout"`
	// Enable/disable unsafe legacy re-negotiation. Valid values: `enable`, `disable`.
	UnsafeLegacyRenegotiation pulumi.StringOutput `pulumi:"unsafeLegacyRenegotiation"`
	// Enable to obscure the host name of the URL of the web browser display. Valid values: `enable`, `disable`.
	UrlObscuration pulumi.StringOutput `pulumi:"urlObscuration"`
	// Name of user peer.
	UserPeer pulumi.StringOutput `pulumi:"userPeer"`
	// Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
	Vdomparam pulumi.StringPtrOutput `pulumi:"vdomparam"`
	// Enable/disable use of IP pools defined in firewall policy while using web-mode. Valid values: `enable`, `disable`.
	WebModeSnat pulumi.StringOutput `pulumi:"webModeSnat"`
	// WINS server 1.
	WinsServer1 pulumi.StringOutput `pulumi:"winsServer1"`
	// WINS server 2.
	WinsServer2 pulumi.StringOutput `pulumi:"winsServer2"`
	// Add HTTP X-Content-Type-Options header. Valid values: `enable`, `disable`.
	XContentTypeOptions pulumi.StringOutput `pulumi:"xContentTypeOptions"`
	// Enable/disable verification of device certificate for SSLVPN ZTNA session. Valid values: `enable`, `disable`.
	ZtnaTrustedClient pulumi.StringOutput `pulumi:"ztnaTrustedClient"`
}

Configure SSL VPN.

## Example Usage

<!--Start PulumiCodeChooser --> ```go package main

import ( 

"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
"github.com/pulumiverse/pulumi-fortios/sdk/go/fortios/vpn"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := vpn.NewSettings(ctx, "trname", &vpn.SettingsArgs{
			LoginAttemptLimit: pulumi.Int(2),
			LoginBlockTime:    pulumi.Int(60),
			LoginTimeout:      pulumi.Int(30),
			Port:              pulumi.Int(443),
			Servercert:        pulumi.String("self-sign"),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

``` <!--End PulumiCodeChooser -->

## Import

VpnSsl Settings can be imported using any of these accepted formats:

```sh $ pulumi import fortios:vpn/ssl/settings:Settings labelname VpnSslSettings ```

If you do not want to import arguments of block:

$ export "FORTIOS_IMPORT_TABLE"="false"

```sh $ pulumi import fortios:vpn/ssl/settings:Settings labelname VpnSslSettings ```

$ unset "FORTIOS_IMPORT_TABLE"

func GetSettings 

func GetSettings(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *SettingsState, opts ...pulumi.ResourceOption) (*Settings, error)

GetSettings gets an existing Settings resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewSettings 

func NewSettings(ctx *pulumi.Context,
	name string, args *SettingsArgs, opts ...pulumi.ResourceOption) (*Settings, error)

NewSettings registers a new resource with the given unique name, arguments, and options.

func (*Settings) ElementType 

func (*Settings) ElementType() reflect.Type

func (*Settings) ToSettingsOutput 

func (i *Settings) ToSettingsOutput() SettingsOutput

func (*Settings) ToSettingsOutputWithContext 

func (i *Settings) ToSettingsOutputWithContext(ctx context.Context) SettingsOutput

type SettingsArgs 

type SettingsArgs struct {
	// Force the SSL-VPN security level. High allows only high. Medium allows medium and high. Low allows any. Valid values: `high`, `medium`, `default`, `low`.
	Algorithm pulumi.StringPtrInput
	// Enable/disable checking of source IP for authentication session. Valid values: `enable`, `disable`.
	AuthSessionCheckSourceIp pulumi.StringPtrInput
	// SSL-VPN authentication timeout (1 - 259200 sec (3 days), 0 for no timeout).
	AuthTimeout pulumi.IntPtrInput
	// Authentication rule for SSL VPN. The structure of `authenticationRule` block is documented below.
	AuthenticationRules SettingsAuthenticationRuleArrayInput
	// Enable to auto-create static routes for the SSL-VPN tunnel IP addresses. Valid values: `enable`, `disable`.
	AutoTunnelStaticRoute pulumi.StringPtrInput
	// Select one or more cipher technologies that cannot be used in SSL-VPN negotiations.
	BannedCipher pulumi.StringPtrInput
	// Enable/disable overriding the configured system language based on the preferred language of the browser. Valid values: `enable`, `disable`.
	BrowserLanguageDetection pulumi.StringPtrInput
	// Enable/disable verification of referer field in HTTP request header. Valid values: `enable`, `disable`.
	CheckReferer pulumi.StringPtrInput
	// Select one or more TLS 1.3 ciphersuites to enable. Does not affect ciphers in TLS 1.2 and below. At least one must be enabled. To disable all, set ssl-max-proto-ver to tls1-2 or below. Valid values: `TLS-AES-128-GCM-SHA256`, `TLS-AES-256-GCM-SHA384`, `TLS-CHACHA20-POLY1305-SHA256`, `TLS-AES-128-CCM-SHA256`, `TLS-AES-128-CCM-8-SHA256`.
	Ciphersuite pulumi.StringPtrInput
	// Set signature algorithms related to client authentication. Affects TLS version <= 1.2 only. Valid values: `no-rsa-pss`, `all`.
	ClientSigalgs pulumi.StringPtrInput
	// Default SSL VPN portal.
	DefaultPortal pulumi.StringPtrInput
	// Compression level (0~9).
	DeflateCompressionLevel pulumi.IntPtrInput
	// Minimum amount of data that triggers compression (200 - 65535 bytes).
	DeflateMinDataSize pulumi.IntPtrInput
	// DNS server 1.
	DnsServer1 pulumi.StringPtrInput
	// DNS server 2.
	DnsServer2 pulumi.StringPtrInput
	// DNS suffix used for SSL-VPN clients.
	DnsSuffix pulumi.StringPtrInput
	// Number of missing heartbeats before the connection is considered dropped.
	DtlsHeartbeatFailCount pulumi.IntPtrInput
	// Idle timeout before DTLS heartbeat is sent.
	DtlsHeartbeatIdleTimeout pulumi.IntPtrInput
	// Interval between DTLS heartbeat.
	DtlsHeartbeatInterval pulumi.IntPtrInput
	// SSLVPN maximum DTLS hello timeout (10 - 60 sec, default = 10).
	DtlsHelloTimeout pulumi.IntPtrInput
	// DTLS maximum protocol version. Valid values: `dtls1-0`, `dtls1-2`.
	DtlsMaxProtoVer pulumi.StringPtrInput
	// DTLS minimum protocol version. Valid values: `dtls1-0`, `dtls1-2`.
	DtlsMinProtoVer pulumi.StringPtrInput
	// Enable DTLS to prevent eavesdropping, tampering, or message forgery. Valid values: `enable`, `disable`.
	DtlsTunnel pulumi.StringPtrInput
	// Tunnel mode: enable parallel IPv4 and IPv6 tunnel. Web mode: support IPv4 and IPv6 bookmarks in the portal. Valid values: `enable`, `disable`.
	DualStackMode pulumi.StringPtrInput
	// Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
	DynamicSortSubtable pulumi.StringPtrInput
	// Encode \2F sequence to forward slash in URLs. Valid values: `enable`, `disable`.
	Encode2fSequence pulumi.StringPtrInput
	// Encrypt and store user passwords for SSL-VPN web sessions. Valid values: `enable`, `disable`.
	EncryptAndStorePassword pulumi.StringPtrInput
	// Enable to force two-factor authentication for all SSL-VPNs. Valid values: `enable`, `disable`.
	ForceTwoFactorAuth pulumi.StringPtrInput
	// Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwish conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
	GetAllTables pulumi.StringPtrInput
	// Forward the same, add, or remove HTTP header. Valid values: `pass`, `add`, `remove`.
	HeaderXForwardedFor pulumi.StringPtrInput
	// Add HSTS includeSubDomains response header. Valid values: `enable`, `disable`.
	HstsIncludeSubdomains pulumi.StringPtrInput
	// Enable to allow HTTP compression over SSL-VPN tunnels. Valid values: `enable`, `disable`.
	HttpCompression pulumi.StringPtrInput
	// Enable/disable SSL-VPN support for HttpOnly cookies. Valid values: `enable`, `disable`.
	HttpOnlyCookie pulumi.StringPtrInput
	// SSL-VPN session is disconnected if an HTTP request body is not received within this time (1 - 60 sec, default = 20).
	HttpRequestBodyTimeout pulumi.IntPtrInput
	// SSL-VPN session is disconnected if an HTTP request header is not received within this time (1 - 60 sec, default = 20).
	HttpRequestHeaderTimeout pulumi.IntPtrInput
	// Enable/disable redirect of port 80 to SSL-VPN port. Valid values: `enable`, `disable`.
	HttpsRedirect pulumi.StringPtrInput
	// SSL VPN disconnects if idle for specified time in seconds.
	IdleTimeout pulumi.IntPtrInput
	// IPv6 DNS server 1.
	Ipv6DnsServer1 pulumi.StringPtrInput
	// IPv6 DNS server 2.
	Ipv6DnsServer2 pulumi.StringPtrInput
	// IPv6 WINS server 1.
	Ipv6WinsServer1 pulumi.StringPtrInput
	// IPv6 WINS server 2.
	Ipv6WinsServer2 pulumi.StringPtrInput
	// SSL VPN maximum login attempt times before block (0 - 10, default = 2, 0 = no limit).
	LoginAttemptLimit pulumi.IntPtrInput
	// Time for which a user is blocked from logging in after too many failed login attempts (0 - 86400 sec, default = 60).
	LoginBlockTime pulumi.IntPtrInput
	// SSLVPN maximum login timeout (10 - 180 sec, default = 30).
	LoginTimeout pulumi.IntPtrInput
	// SSL-VPN access port (1 - 65535).
	Port pulumi.IntPtrInput
	// Enable means that if SSL-VPN connections are allowed on an interface admin GUI connections are blocked on that interface. Valid values: `enable`, `disable`.
	PortPrecedence pulumi.StringPtrInput
	// Enable to require client certificates for all SSL-VPN users. Valid values: `enable`, `disable`.
	Reqclientcert pulumi.StringPtrInput
	// Enable to allow SSL-VPN sessions to bypass routing and bind to the incoming interface. Valid values: `enable`, `disable`.
	RouteSourceInterface pulumi.StringPtrInput
	// SAML local redirect port in the machine running FCT (0 - 65535). 0 is to disable redirection on FGT side.
	SamlRedirectPort pulumi.IntPtrInput
	// Server hostname for HTTPS. When set, will be used for SSL VPN web proxy host header for any redirection.
	ServerHostname pulumi.StringPtrInput
	// Name of the server certificate to be used for SSL-VPNs.
	Servercert pulumi.StringPtrInput
	// Enable/disable negated source IPv6 address match. Valid values: `enable`, `disable`.
	SourceAddress6Negate pulumi.StringPtrInput
	// IPv6 source address of incoming traffic. The structure of `sourceAddress6` block is documented below.
	SourceAddress6s SettingsSourceAddress6ArrayInput
	// Enable/disable negated source address match. Valid values: `enable`, `disable`.
	SourceAddressNegate pulumi.StringPtrInput
	// Source address of incoming traffic. The structure of `sourceAddress` block is documented below.
	SourceAddresses SettingsSourceAddressArrayInput
	// SSL VPN source interface of incoming traffic. The structure of `sourceInterface` block is documented below.
	SourceInterfaces SettingsSourceInterfaceArrayInput
	// Enable to allow client renegotiation by the server if the tunnel goes down. Valid values: `disable`, `enable`.
	SslClientRenegotiation pulumi.StringPtrInput
	// Enable/disable insertion of empty fragment. Valid values: `enable`, `disable`.
	SslInsertEmptyFragment pulumi.StringPtrInput
	// SSL maximum protocol version. Valid values: `tls1-0`, `tls1-1`, `tls1-2`, `tls1-3`.
	SslMaxProtoVer pulumi.StringPtrInput
	// SSL minimum protocol version. Valid values: `tls1-0`, `tls1-1`, `tls1-2`, `tls1-3`.
	SslMinProtoVer pulumi.StringPtrInput
	// Enable/disable SSL-VPN. Valid values: `enable`, `disable`.
	Status pulumi.StringPtrInput
	// Enable/disable TLSv1.0. Valid values: `enable`, `disable`.
	Tlsv10 pulumi.StringPtrInput
	// Enable/disable TLSv1.1. Valid values: `enable`, `disable`.
	Tlsv11 pulumi.StringPtrInput
	// Enable/disable TLSv1.2. Valid values: `enable`, `disable`.
	Tlsv12 pulumi.StringPtrInput
	// Enable/disable TLSv1.3. Valid values: `enable`, `disable`.
	Tlsv13 pulumi.StringPtrInput
	// Transform backward slashes to forward slashes in URLs. Valid values: `enable`, `disable`.
	TransformBackwardSlashes pulumi.StringPtrInput
	// Method used for assigning address for tunnel. Valid values: `first-available`, `round-robin`.
	TunnelAddrAssignedMethod pulumi.StringPtrInput
	// Enable/disable tunnel connection without re-authorization if previous connection dropped. Valid values: `enable`, `disable`.
	TunnelConnectWithoutReauth pulumi.StringPtrInput
	// Names of the IPv4 IP Pool firewall objects that define the IP addresses reserved for remote clients. The structure of `tunnelIpPools` block is documented below.
	TunnelIpPools SettingsTunnelIpPoolArrayInput
	// Names of the IPv6 IP Pool firewall objects that define the IP addresses reserved for remote clients. The structure of `tunnelIpv6Pools` block is documented below.
	TunnelIpv6Pools SettingsTunnelIpv6PoolArrayInput
	// Time out value to clean up user session after tunnel connection is dropped (1 - 255 sec, default=30).
	TunnelUserSessionTimeout pulumi.IntPtrInput
	// Enable/disable unsafe legacy re-negotiation. Valid values: `enable`, `disable`.
	UnsafeLegacyRenegotiation pulumi.StringPtrInput
	// Enable to obscure the host name of the URL of the web browser display. Valid values: `enable`, `disable`.
	UrlObscuration pulumi.StringPtrInput
	// Name of user peer.
	UserPeer pulumi.StringPtrInput
	// Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
	Vdomparam pulumi.StringPtrInput
	// Enable/disable use of IP pools defined in firewall policy while using web-mode. Valid values: `enable`, `disable`.
	WebModeSnat pulumi.StringPtrInput
	// WINS server 1.
	WinsServer1 pulumi.StringPtrInput
	// WINS server 2.
	WinsServer2 pulumi.StringPtrInput
	// Add HTTP X-Content-Type-Options header. Valid values: `enable`, `disable`.
	XContentTypeOptions pulumi.StringPtrInput
	// Enable/disable verification of device certificate for SSLVPN ZTNA session. Valid values: `enable`, `disable`.
	ZtnaTrustedClient pulumi.StringPtrInput
}

The set of arguments for constructing a Settings resource.

func (SettingsArgs) ElementType 

func (SettingsArgs) ElementType() reflect.Type

type SettingsArray 

type SettingsArray []SettingsInput

func (SettingsArray) ElementType 

func (SettingsArray) ElementType() reflect.Type

func (SettingsArray) ToSettingsArrayOutput 

func (i SettingsArray) ToSettingsArrayOutput() SettingsArrayOutput

func (SettingsArray) ToSettingsArrayOutputWithContext 

func (i SettingsArray) ToSettingsArrayOutputWithContext(ctx context.Context) SettingsArrayOutput

type SettingsArrayInput 

type SettingsArrayInput interface {
	pulumi.Input

	ToSettingsArrayOutput() SettingsArrayOutput
	ToSettingsArrayOutputWithContext(context.Context) SettingsArrayOutput
}

SettingsArrayInput is an input type that accepts SettingsArray and SettingsArrayOutput values. You can construct a concrete instance of `SettingsArrayInput` via: 

SettingsArray{ SettingsArgs{...} }

type SettingsArrayOutput 

type SettingsArrayOutput struct{ *pulumi.OutputState }

func (SettingsArrayOutput) ElementType 

func (SettingsArrayOutput) ElementType() reflect.Type

func (SettingsArrayOutput) Index 

func (o SettingsArrayOutput) Index(i pulumi.IntInput) SettingsOutput

func (SettingsArrayOutput) ToSettingsArrayOutput 

func (o SettingsArrayOutput) ToSettingsArrayOutput() SettingsArrayOutput

func (SettingsArrayOutput) ToSettingsArrayOutputWithContext 

func (o SettingsArrayOutput) ToSettingsArrayOutputWithContext(ctx context.Context) SettingsArrayOutput

type SettingsAuthenticationRule 

type SettingsAuthenticationRule struct {
	// SSL VPN authentication method restriction.
	Auth *string `pulumi:"auth"`
	// SSL VPN cipher strength. Valid values: `any`, `high`, `medium`.
	Cipher *string `pulumi:"cipher"`
	// Enable/disable SSL VPN client certificate restrictive. Valid values: `enable`, `disable`.
	ClientCert *string `pulumi:"clientCert"`
	// User groups. The structure of `groups` block is documented below.
	Groups []SettingsAuthenticationRuleGroup `pulumi:"groups"`
	// ID (0 - 4294967295).
	Id *int `pulumi:"id"`
	// SSL VPN portal.
	Portal *string `pulumi:"portal"`
	// SSL VPN realm.
	Realm *string `pulumi:"realm"`
	// Enable/disable negated source IPv6 address match. Valid values: `enable`, `disable`.
	SourceAddress6Negate *string `pulumi:"sourceAddress6Negate"`
	// IPv6 source address of incoming traffic. The structure of `sourceAddress6` block is documented below.
	SourceAddress6s []SettingsAuthenticationRuleSourceAddress6 `pulumi:"sourceAddress6s"`
	// Enable/disable negated source address match. Valid values: `enable`, `disable`.
	SourceAddressNegate *string `pulumi:"sourceAddressNegate"`
	// Source address of incoming traffic. The structure of `sourceAddress` block is documented below.
	SourceAddresses []SettingsAuthenticationRuleSourceAddress `pulumi:"sourceAddresses"`
	// SSL VPN source interface of incoming traffic. The structure of `sourceInterface` block is documented below.
	SourceInterfaces []SettingsAuthenticationRuleSourceInterface `pulumi:"sourceInterfaces"`
	// Name of user peer.
	UserPeer *string `pulumi:"userPeer"`
	// User name. The structure of `users` block is documented below.
	Users []SettingsAuthenticationRuleUser `pulumi:"users"`
}

type SettingsAuthenticationRuleArgs 

type SettingsAuthenticationRuleArgs struct {
	// SSL VPN authentication method restriction.
	Auth pulumi.StringPtrInput `pulumi:"auth"`
	// SSL VPN cipher strength. Valid values: `any`, `high`, `medium`.
	Cipher pulumi.StringPtrInput `pulumi:"cipher"`
	// Enable/disable SSL VPN client certificate restrictive. Valid values: `enable`, `disable`.
	ClientCert pulumi.StringPtrInput `pulumi:"clientCert"`
	// User groups. The structure of `groups` block is documented below.
	Groups SettingsAuthenticationRuleGroupArrayInput `pulumi:"groups"`
	// ID (0 - 4294967295).
	Id pulumi.IntPtrInput `pulumi:"id"`
	// SSL VPN portal.
	Portal pulumi.StringPtrInput `pulumi:"portal"`
	// SSL VPN realm.
	Realm pulumi.StringPtrInput `pulumi:"realm"`
	// Enable/disable negated source IPv6 address match. Valid values: `enable`, `disable`.
	SourceAddress6Negate pulumi.StringPtrInput `pulumi:"sourceAddress6Negate"`
	// IPv6 source address of incoming traffic. The structure of `sourceAddress6` block is documented below.
	SourceAddress6s SettingsAuthenticationRuleSourceAddress6ArrayInput `pulumi:"sourceAddress6s"`
	// Enable/disable negated source address match. Valid values: `enable`, `disable`.
	SourceAddressNegate pulumi.StringPtrInput `pulumi:"sourceAddressNegate"`
	// Source address of incoming traffic. The structure of `sourceAddress` block is documented below.
	SourceAddresses SettingsAuthenticationRuleSourceAddressArrayInput `pulumi:"sourceAddresses"`
	// SSL VPN source interface of incoming traffic. The structure of `sourceInterface` block is documented below.
	SourceInterfaces SettingsAuthenticationRuleSourceInterfaceArrayInput `pulumi:"sourceInterfaces"`
	// Name of user peer.
	UserPeer pulumi.StringPtrInput `pulumi:"userPeer"`
	// User name. The structure of `users` block is documented below.
	Users SettingsAuthenticationRuleUserArrayInput `pulumi:"users"`
}

func (SettingsAuthenticationRuleArgs) ElementType 

func (SettingsAuthenticationRuleArgs) ElementType() reflect.Type

func (SettingsAuthenticationRuleArgs) ToSettingsAuthenticationRuleOutput 

func (i SettingsAuthenticationRuleArgs) ToSettingsAuthenticationRuleOutput() SettingsAuthenticationRuleOutput

func (SettingsAuthenticationRuleArgs) ToSettingsAuthenticationRuleOutputWithContext 

func (i SettingsAuthenticationRuleArgs) ToSettingsAuthenticationRuleOutputWithContext(ctx context.Context) SettingsAuthenticationRuleOutput

type SettingsAuthenticationRuleArray 

type SettingsAuthenticationRuleArray []SettingsAuthenticationRuleInput

func (SettingsAuthenticationRuleArray) ElementType 

func (SettingsAuthenticationRuleArray) ElementType() reflect.Type

func (SettingsAuthenticationRuleArray) ToSettingsAuthenticationRuleArrayOutput 

func (i SettingsAuthenticationRuleArray) ToSettingsAuthenticationRuleArrayOutput() SettingsAuthenticationRuleArrayOutput

func (SettingsAuthenticationRuleArray) ToSettingsAuthenticationRuleArrayOutputWithContext 

func (i SettingsAuthenticationRuleArray) ToSettingsAuthenticationRuleArrayOutputWithContext(ctx context.Context) SettingsAuthenticationRuleArrayOutput

type SettingsAuthenticationRuleArrayInput 

type SettingsAuthenticationRuleArrayInput interface {
	pulumi.Input

	ToSettingsAuthenticationRuleArrayOutput() SettingsAuthenticationRuleArrayOutput
	ToSettingsAuthenticationRuleArrayOutputWithContext(context.Context) SettingsAuthenticationRuleArrayOutput
}

SettingsAuthenticationRuleArrayInput is an input type that accepts SettingsAuthenticationRuleArray and SettingsAuthenticationRuleArrayOutput values. You can construct a concrete instance of `SettingsAuthenticationRuleArrayInput` via: 

SettingsAuthenticationRuleArray{ SettingsAuthenticationRuleArgs{...} }

type SettingsAuthenticationRuleArrayOutput 

type SettingsAuthenticationRuleArrayOutput struct{ *pulumi.OutputState }

func (SettingsAuthenticationRuleArrayOutput) ElementType 

func (SettingsAuthenticationRuleArrayOutput) ElementType() reflect.Type

func (SettingsAuthenticationRuleArrayOutput) Index 

func (o SettingsAuthenticationRuleArrayOutput) Index(i pulumi.IntInput) SettingsAuthenticationRuleOutput

func (SettingsAuthenticationRuleArrayOutput) ToSettingsAuthenticationRuleArrayOutput 

func (o SettingsAuthenticationRuleArrayOutput) ToSettingsAuthenticationRuleArrayOutput() SettingsAuthenticationRuleArrayOutput

func (SettingsAuthenticationRuleArrayOutput) ToSettingsAuthenticationRuleArrayOutputWithContext 

func (o SettingsAuthenticationRuleArrayOutput) ToSettingsAuthenticationRuleArrayOutputWithContext(ctx context.Context) SettingsAuthenticationRuleArrayOutput

type SettingsAuthenticationRuleGroup 

type SettingsAuthenticationRuleGroup struct {
	// Group name.
	Name *string `pulumi:"name"`
}

type SettingsAuthenticationRuleGroupArgs 

type SettingsAuthenticationRuleGroupArgs struct {
	// Group name.
	Name pulumi.StringPtrInput `pulumi:"name"`
}

func (SettingsAuthenticationRuleGroupArgs) ElementType 

func (SettingsAuthenticationRuleGroupArgs) ElementType() reflect.Type

func (SettingsAuthenticationRuleGroupArgs) ToSettingsAuthenticationRuleGroupOutput 

func (i SettingsAuthenticationRuleGroupArgs) ToSettingsAuthenticationRuleGroupOutput() SettingsAuthenticationRuleGroupOutput

func (SettingsAuthenticationRuleGroupArgs) ToSettingsAuthenticationRuleGroupOutputWithContext 

func (i SettingsAuthenticationRuleGroupArgs) ToSettingsAuthenticationRuleGroupOutputWithContext(ctx context.Context) SettingsAuthenticationRuleGroupOutput

type SettingsAuthenticationRuleGroupArray 

type SettingsAuthenticationRuleGroupArray []SettingsAuthenticationRuleGroupInput

func (SettingsAuthenticationRuleGroupArray) ElementType 

func (SettingsAuthenticationRuleGroupArray) ElementType() reflect.Type

func (SettingsAuthenticationRuleGroupArray) ToSettingsAuthenticationRuleGroupArrayOutput 

func (i SettingsAuthenticationRuleGroupArray) ToSettingsAuthenticationRuleGroupArrayOutput() SettingsAuthenticationRuleGroupArrayOutput

func (SettingsAuthenticationRuleGroupArray) ToSettingsAuthenticationRuleGroupArrayOutputWithContext 

func (i SettingsAuthenticationRuleGroupArray) ToSettingsAuthenticationRuleGroupArrayOutputWithContext(ctx context.Context) SettingsAuthenticationRuleGroupArrayOutput

type SettingsAuthenticationRuleGroupArrayInput 

type SettingsAuthenticationRuleGroupArrayInput interface {
	pulumi.Input

	ToSettingsAuthenticationRuleGroupArrayOutput() SettingsAuthenticationRuleGroupArrayOutput
	ToSettingsAuthenticationRuleGroupArrayOutputWithContext(context.Context) SettingsAuthenticationRuleGroupArrayOutput
}

SettingsAuthenticationRuleGroupArrayInput is an input type that accepts SettingsAuthenticationRuleGroupArray and SettingsAuthenticationRuleGroupArrayOutput values. You can construct a concrete instance of `SettingsAuthenticationRuleGroupArrayInput` via: 

SettingsAuthenticationRuleGroupArray{ SettingsAuthenticationRuleGroupArgs{...} }

type SettingsAuthenticationRuleGroupArrayOutput 

type SettingsAuthenticationRuleGroupArrayOutput struct{ *pulumi.OutputState }

func (SettingsAuthenticationRuleGroupArrayOutput) ElementType 

func (SettingsAuthenticationRuleGroupArrayOutput) ElementType() reflect.Type

func (SettingsAuthenticationRuleGroupArrayOutput) Index 

func (o SettingsAuthenticationRuleGroupArrayOutput) Index(i pulumi.IntInput) SettingsAuthenticationRuleGroupOutput

func (SettingsAuthenticationRuleGroupArrayOutput) ToSettingsAuthenticationRuleGroupArrayOutput 

func (o SettingsAuthenticationRuleGroupArrayOutput) ToSettingsAuthenticationRuleGroupArrayOutput() SettingsAuthenticationRuleGroupArrayOutput

func (SettingsAuthenticationRuleGroupArrayOutput) ToSettingsAuthenticationRuleGroupArrayOutputWithContext 

func (o SettingsAuthenticationRuleGroupArrayOutput) ToSettingsAuthenticationRuleGroupArrayOutputWithContext(ctx context.Context) SettingsAuthenticationRuleGroupArrayOutput

type SettingsAuthenticationRuleGroupInput 

type SettingsAuthenticationRuleGroupInput interface {
	pulumi.Input

	ToSettingsAuthenticationRuleGroupOutput() SettingsAuthenticationRuleGroupOutput
	ToSettingsAuthenticationRuleGroupOutputWithContext(context.Context) SettingsAuthenticationRuleGroupOutput
}

SettingsAuthenticationRuleGroupInput is an input type that accepts SettingsAuthenticationRuleGroupArgs and SettingsAuthenticationRuleGroupOutput values. You can construct a concrete instance of `SettingsAuthenticationRuleGroupInput` via: 

SettingsAuthenticationRuleGroupArgs{...}

type SettingsAuthenticationRuleGroupOutput 

type SettingsAuthenticationRuleGroupOutput struct{ *pulumi.OutputState }

func (SettingsAuthenticationRuleGroupOutput) ElementType 

func (SettingsAuthenticationRuleGroupOutput) ElementType() reflect.Type

func (SettingsAuthenticationRuleGroupOutput) Name 

func (o SettingsAuthenticationRuleGroupOutput) Name() pulumi.StringPtrOutput

Group name.

func (SettingsAuthenticationRuleGroupOutput) ToSettingsAuthenticationRuleGroupOutput 

func (o SettingsAuthenticationRuleGroupOutput) ToSettingsAuthenticationRuleGroupOutput() SettingsAuthenticationRuleGroupOutput

func (SettingsAuthenticationRuleGroupOutput) ToSettingsAuthenticationRuleGroupOutputWithContext 

func (o SettingsAuthenticationRuleGroupOutput) ToSettingsAuthenticationRuleGroupOutputWithContext(ctx context.Context) SettingsAuthenticationRuleGroupOutput

type SettingsAuthenticationRuleInput 

type SettingsAuthenticationRuleInput interface {
	pulumi.Input

	ToSettingsAuthenticationRuleOutput() SettingsAuthenticationRuleOutput
	ToSettingsAuthenticationRuleOutputWithContext(context.Context) SettingsAuthenticationRuleOutput
}

SettingsAuthenticationRuleInput is an input type that accepts SettingsAuthenticationRuleArgs and SettingsAuthenticationRuleOutput values. You can construct a concrete instance of `SettingsAuthenticationRuleInput` via: 

SettingsAuthenticationRuleArgs{...}

type SettingsAuthenticationRuleOutput 

type SettingsAuthenticationRuleOutput struct{ *pulumi.OutputState }

func (SettingsAuthenticationRuleOutput) Auth 

func (o SettingsAuthenticationRuleOutput) Auth() pulumi.StringPtrOutput

SSL VPN authentication method restriction.

func (SettingsAuthenticationRuleOutput) Cipher 

func (o SettingsAuthenticationRuleOutput) Cipher() pulumi.StringPtrOutput

SSL VPN cipher strength. Valid values: `any`, `high`, `medium`.

func (SettingsAuthenticationRuleOutput) ClientCert 

func (o SettingsAuthenticationRuleOutput) ClientCert() pulumi.StringPtrOutput

Enable/disable SSL VPN client certificate restrictive. Valid values: `enable`, `disable`.

func (SettingsAuthenticationRuleOutput) ElementType 

func (SettingsAuthenticationRuleOutput) ElementType() reflect.Type

func (SettingsAuthenticationRuleOutput) Groups 

func (o SettingsAuthenticationRuleOutput) Groups() SettingsAuthenticationRuleGroupArrayOutput

User groups. The structure of `groups` block is documented below.

func (SettingsAuthenticationRuleOutput) Id 

func (o SettingsAuthenticationRuleOutput) Id() pulumi.IntPtrOutput

ID (0 - 4294967295).

func (SettingsAuthenticationRuleOutput) Portal 

func (o SettingsAuthenticationRuleOutput) Portal() pulumi.StringPtrOutput

SSL VPN portal.

func (SettingsAuthenticationRuleOutput) Realm 

func (o SettingsAuthenticationRuleOutput) Realm() pulumi.StringPtrOutput

SSL VPN realm.

func (SettingsAuthenticationRuleOutput) SourceAddress6Negate 

func (o SettingsAuthenticationRuleOutput) SourceAddress6Negate() pulumi.StringPtrOutput

Enable/disable negated source IPv6 address match. Valid values: `enable`, `disable`.

func (SettingsAuthenticationRuleOutput) SourceAddress6s 

func (o SettingsAuthenticationRuleOutput) SourceAddress6s() SettingsAuthenticationRuleSourceAddress6ArrayOutput

IPv6 source address of incoming traffic. The structure of `sourceAddress6` block is documented below.

func (SettingsAuthenticationRuleOutput) SourceAddressNegate 

func (o SettingsAuthenticationRuleOutput) SourceAddressNegate() pulumi.StringPtrOutput

Enable/disable negated source address match. Valid values: `enable`, `disable`.

func (SettingsAuthenticationRuleOutput) SourceAddresses 

func (o SettingsAuthenticationRuleOutput) SourceAddresses() SettingsAuthenticationRuleSourceAddressArrayOutput

Source address of incoming traffic. The structure of `sourceAddress` block is documented below.

func (SettingsAuthenticationRuleOutput) SourceInterfaces 

func (o SettingsAuthenticationRuleOutput) SourceInterfaces() SettingsAuthenticationRuleSourceInterfaceArrayOutput

SSL VPN source interface of incoming traffic. The structure of `sourceInterface` block is documented below.

func (SettingsAuthenticationRuleOutput) ToSettingsAuthenticationRuleOutput 

func (o SettingsAuthenticationRuleOutput) ToSettingsAuthenticationRuleOutput() SettingsAuthenticationRuleOutput

func (SettingsAuthenticationRuleOutput) ToSettingsAuthenticationRuleOutputWithContext 

func (o SettingsAuthenticationRuleOutput) ToSettingsAuthenticationRuleOutputWithContext(ctx context.Context) SettingsAuthenticationRuleOutput

func (SettingsAuthenticationRuleOutput) UserPeer 

func (o SettingsAuthenticationRuleOutput) UserPeer() pulumi.StringPtrOutput

Name of user peer.

func (SettingsAuthenticationRuleOutput) Users 

func (o SettingsAuthenticationRuleOutput) Users() SettingsAuthenticationRuleUserArrayOutput

User name. The structure of `users` block is documented below.

type SettingsAuthenticationRuleSourceAddress 

type SettingsAuthenticationRuleSourceAddress struct {
	// IPv6 address name.
	Name *string `pulumi:"name"`
}

type SettingsAuthenticationRuleSourceAddress6 

type SettingsAuthenticationRuleSourceAddress6 struct {
	// Group name.
	Name *string `pulumi:"name"`
}

type SettingsAuthenticationRuleSourceAddress6Args 

type SettingsAuthenticationRuleSourceAddress6Args struct {
	// Group name.
	Name pulumi.StringPtrInput `pulumi:"name"`
}

func (SettingsAuthenticationRuleSourceAddress6Args) ElementType 

func (SettingsAuthenticationRuleSourceAddress6Args) ElementType() reflect.Type

func (SettingsAuthenticationRuleSourceAddress6Args) ToSettingsAuthenticationRuleSourceAddress6Output 

func (i SettingsAuthenticationRuleSourceAddress6Args) ToSettingsAuthenticationRuleSourceAddress6Output() SettingsAuthenticationRuleSourceAddress6Output

func (SettingsAuthenticationRuleSourceAddress6Args) ToSettingsAuthenticationRuleSourceAddress6OutputWithContext 

func (i SettingsAuthenticationRuleSourceAddress6Args) ToSettingsAuthenticationRuleSourceAddress6OutputWithContext(ctx context.Context) SettingsAuthenticationRuleSourceAddress6Output

type SettingsAuthenticationRuleSourceAddress6Array 

type SettingsAuthenticationRuleSourceAddress6Array []SettingsAuthenticationRuleSourceAddress6Input

func (SettingsAuthenticationRuleSourceAddress6Array) ElementType 

func (SettingsAuthenticationRuleSourceAddress6Array) ElementType() reflect.Type

func (SettingsAuthenticationRuleSourceAddress6Array) ToSettingsAuthenticationRuleSourceAddress6ArrayOutput 

func (i SettingsAuthenticationRuleSourceAddress6Array) ToSettingsAuthenticationRuleSourceAddress6ArrayOutput() SettingsAuthenticationRuleSourceAddress6ArrayOutput

func (SettingsAuthenticationRuleSourceAddress6Array) ToSettingsAuthenticationRuleSourceAddress6ArrayOutputWithContext 

func (i SettingsAuthenticationRuleSourceAddress6Array) ToSettingsAuthenticationRuleSourceAddress6ArrayOutputWithContext(ctx context.Context) SettingsAuthenticationRuleSourceAddress6ArrayOutput

type SettingsAuthenticationRuleSourceAddress6ArrayInput 

type SettingsAuthenticationRuleSourceAddress6ArrayInput interface {
	pulumi.Input

	ToSettingsAuthenticationRuleSourceAddress6ArrayOutput() SettingsAuthenticationRuleSourceAddress6ArrayOutput
	ToSettingsAuthenticationRuleSourceAddress6ArrayOutputWithContext(context.Context) SettingsAuthenticationRuleSourceAddress6ArrayOutput
}

SettingsAuthenticationRuleSourceAddress6ArrayInput is an input type that accepts SettingsAuthenticationRuleSourceAddress6Array and SettingsAuthenticationRuleSourceAddress6ArrayOutput values. You can construct a concrete instance of `SettingsAuthenticationRuleSourceAddress6ArrayInput` via: 

SettingsAuthenticationRuleSourceAddress6Array{ SettingsAuthenticationRuleSourceAddress6Args{...} }

type SettingsAuthenticationRuleSourceAddress6ArrayOutput 

type SettingsAuthenticationRuleSourceAddress6ArrayOutput struct{ *pulumi.OutputState }

func (SettingsAuthenticationRuleSourceAddress6ArrayOutput) ElementType 

func (SettingsAuthenticationRuleSourceAddress6ArrayOutput) ElementType() reflect.Type

func (SettingsAuthenticationRuleSourceAddress6ArrayOutput) Index 

func (o SettingsAuthenticationRuleSourceAddress6ArrayOutput) Index(i pulumi.IntInput) SettingsAuthenticationRuleSourceAddress6Output

func (SettingsAuthenticationRuleSourceAddress6ArrayOutput) ToSettingsAuthenticationRuleSourceAddress6ArrayOutput 

func (o SettingsAuthenticationRuleSourceAddress6ArrayOutput) ToSettingsAuthenticationRuleSourceAddress6ArrayOutput() SettingsAuthenticationRuleSourceAddress6ArrayOutput

func (SettingsAuthenticationRuleSourceAddress6ArrayOutput) ToSettingsAuthenticationRuleSourceAddress6ArrayOutputWithContext 

func (o SettingsAuthenticationRuleSourceAddress6ArrayOutput) ToSettingsAuthenticationRuleSourceAddress6ArrayOutputWithContext(ctx context.Context) SettingsAuthenticationRuleSourceAddress6ArrayOutput

type SettingsAuthenticationRuleSourceAddress6Input 

type SettingsAuthenticationRuleSourceAddress6Input interface {
	pulumi.Input

	ToSettingsAuthenticationRuleSourceAddress6Output() SettingsAuthenticationRuleSourceAddress6Output
	ToSettingsAuthenticationRuleSourceAddress6OutputWithContext(context.Context) SettingsAuthenticationRuleSourceAddress6Output
}

SettingsAuthenticationRuleSourceAddress6Input is an input type that accepts SettingsAuthenticationRuleSourceAddress6Args and SettingsAuthenticationRuleSourceAddress6Output values. You can construct a concrete instance of `SettingsAuthenticationRuleSourceAddress6Input` via: 

SettingsAuthenticationRuleSourceAddress6Args{...}

type SettingsAuthenticationRuleSourceAddress6Output 

type SettingsAuthenticationRuleSourceAddress6Output struct{ *pulumi.OutputState }

func (SettingsAuthenticationRuleSourceAddress6Output) ElementType 

func (SettingsAuthenticationRuleSourceAddress6Output) ElementType() reflect.Type

func (SettingsAuthenticationRuleSourceAddress6Output) Name 

func (o SettingsAuthenticationRuleSourceAddress6Output) Name() pulumi.StringPtrOutput

Group name.

func (SettingsAuthenticationRuleSourceAddress6Output) ToSettingsAuthenticationRuleSourceAddress6Output 

func (o SettingsAuthenticationRuleSourceAddress6Output) ToSettingsAuthenticationRuleSourceAddress6Output() SettingsAuthenticationRuleSourceAddress6Output

func (SettingsAuthenticationRuleSourceAddress6Output) ToSettingsAuthenticationRuleSourceAddress6OutputWithContext 

func (o SettingsAuthenticationRuleSourceAddress6Output) ToSettingsAuthenticationRuleSourceAddress6OutputWithContext(ctx context.Context) SettingsAuthenticationRuleSourceAddress6Output

type SettingsAuthenticationRuleSourceAddressArgs 

type SettingsAuthenticationRuleSourceAddressArgs struct {
	// IPv6 address name.
	Name pulumi.StringPtrInput `pulumi:"name"`
}

func (SettingsAuthenticationRuleSourceAddressArgs) ElementType 

func (SettingsAuthenticationRuleSourceAddressArgs) ElementType() reflect.Type

func (SettingsAuthenticationRuleSourceAddressArgs) ToSettingsAuthenticationRuleSourceAddressOutput 

func (i SettingsAuthenticationRuleSourceAddressArgs) ToSettingsAuthenticationRuleSourceAddressOutput() SettingsAuthenticationRuleSourceAddressOutput

func (SettingsAuthenticationRuleSourceAddressArgs) ToSettingsAuthenticationRuleSourceAddressOutputWithContext 

func (i SettingsAuthenticationRuleSourceAddressArgs) ToSettingsAuthenticationRuleSourceAddressOutputWithContext(ctx context.Context) SettingsAuthenticationRuleSourceAddressOutput

type SettingsAuthenticationRuleSourceAddressArray 

type SettingsAuthenticationRuleSourceAddressArray []SettingsAuthenticationRuleSourceAddressInput

func (SettingsAuthenticationRuleSourceAddressArray) ElementType 

func (SettingsAuthenticationRuleSourceAddressArray) ElementType() reflect.Type

func (SettingsAuthenticationRuleSourceAddressArray) ToSettingsAuthenticationRuleSourceAddressArrayOutput 

func (i SettingsAuthenticationRuleSourceAddressArray) ToSettingsAuthenticationRuleSourceAddressArrayOutput() SettingsAuthenticationRuleSourceAddressArrayOutput

func (SettingsAuthenticationRuleSourceAddressArray) ToSettingsAuthenticationRuleSourceAddressArrayOutputWithContext 

func (i SettingsAuthenticationRuleSourceAddressArray) ToSettingsAuthenticationRuleSourceAddressArrayOutputWithContext(ctx context.Context) SettingsAuthenticationRuleSourceAddressArrayOutput

type SettingsAuthenticationRuleSourceAddressArrayInput 

type SettingsAuthenticationRuleSourceAddressArrayInput interface {
	pulumi.Input

	ToSettingsAuthenticationRuleSourceAddressArrayOutput() SettingsAuthenticationRuleSourceAddressArrayOutput
	ToSettingsAuthenticationRuleSourceAddressArrayOutputWithContext(context.Context) SettingsAuthenticationRuleSourceAddressArrayOutput
}

SettingsAuthenticationRuleSourceAddressArrayInput is an input type that accepts SettingsAuthenticationRuleSourceAddressArray and SettingsAuthenticationRuleSourceAddressArrayOutput values. You can construct a concrete instance of `SettingsAuthenticationRuleSourceAddressArrayInput` via: 

SettingsAuthenticationRuleSourceAddressArray{ SettingsAuthenticationRuleSourceAddressArgs{...} }

type SettingsAuthenticationRuleSourceAddressArrayOutput 

type SettingsAuthenticationRuleSourceAddressArrayOutput struct{ *pulumi.OutputState }

func (SettingsAuthenticationRuleSourceAddressArrayOutput) ElementType 

func (SettingsAuthenticationRuleSourceAddressArrayOutput) ElementType() reflect.Type

func (SettingsAuthenticationRuleSourceAddressArrayOutput) Index 

func (o SettingsAuthenticationRuleSourceAddressArrayOutput) Index(i pulumi.IntInput) SettingsAuthenticationRuleSourceAddressOutput

func (SettingsAuthenticationRuleSourceAddressArrayOutput) ToSettingsAuthenticationRuleSourceAddressArrayOutput 

func (o SettingsAuthenticationRuleSourceAddressArrayOutput) ToSettingsAuthenticationRuleSourceAddressArrayOutput() SettingsAuthenticationRuleSourceAddressArrayOutput

func (SettingsAuthenticationRuleSourceAddressArrayOutput) ToSettingsAuthenticationRuleSourceAddressArrayOutputWithContext 

func (o SettingsAuthenticationRuleSourceAddressArrayOutput) ToSettingsAuthenticationRuleSourceAddressArrayOutputWithContext(ctx context.Context) SettingsAuthenticationRuleSourceAddressArrayOutput

type SettingsAuthenticationRuleSourceAddressInput 

type SettingsAuthenticationRuleSourceAddressInput interface {
	pulumi.Input

	ToSettingsAuthenticationRuleSourceAddressOutput() SettingsAuthenticationRuleSourceAddressOutput
	ToSettingsAuthenticationRuleSourceAddressOutputWithContext(context.Context) SettingsAuthenticationRuleSourceAddressOutput
}

SettingsAuthenticationRuleSourceAddressInput is an input type that accepts SettingsAuthenticationRuleSourceAddressArgs and SettingsAuthenticationRuleSourceAddressOutput values. You can construct a concrete instance of `SettingsAuthenticationRuleSourceAddressInput` via: 

SettingsAuthenticationRuleSourceAddressArgs{...}

type SettingsAuthenticationRuleSourceAddressOutput 

type SettingsAuthenticationRuleSourceAddressOutput struct{ *pulumi.OutputState }

func (SettingsAuthenticationRuleSourceAddressOutput) ElementType 

func (SettingsAuthenticationRuleSourceAddressOutput) ElementType() reflect.Type

func (SettingsAuthenticationRuleSourceAddressOutput) Name 

func (o SettingsAuthenticationRuleSourceAddressOutput) Name() pulumi.StringPtrOutput

IPv6 address name.

func (SettingsAuthenticationRuleSourceAddressOutput) ToSettingsAuthenticationRuleSourceAddressOutput 

func (o SettingsAuthenticationRuleSourceAddressOutput) ToSettingsAuthenticationRuleSourceAddressOutput() SettingsAuthenticationRuleSourceAddressOutput

func (SettingsAuthenticationRuleSourceAddressOutput) ToSettingsAuthenticationRuleSourceAddressOutputWithContext 

func (o SettingsAuthenticationRuleSourceAddressOutput) ToSettingsAuthenticationRuleSourceAddressOutputWithContext(ctx context.Context) SettingsAuthenticationRuleSourceAddressOutput

type SettingsAuthenticationRuleSourceInterface 

type SettingsAuthenticationRuleSourceInterface struct {
	// Interface name.
	Name *string `pulumi:"name"`
}

type SettingsAuthenticationRuleSourceInterfaceArgs 

type SettingsAuthenticationRuleSourceInterfaceArgs struct {
	// Interface name.
	Name pulumi.StringPtrInput `pulumi:"name"`
}

func (SettingsAuthenticationRuleSourceInterfaceArgs) ElementType 

func (SettingsAuthenticationRuleSourceInterfaceArgs) ElementType() reflect.Type

func (SettingsAuthenticationRuleSourceInterfaceArgs) ToSettingsAuthenticationRuleSourceInterfaceOutput 

func (i SettingsAuthenticationRuleSourceInterfaceArgs) ToSettingsAuthenticationRuleSourceInterfaceOutput() SettingsAuthenticationRuleSourceInterfaceOutput

func (SettingsAuthenticationRuleSourceInterfaceArgs) ToSettingsAuthenticationRuleSourceInterfaceOutputWithContext 

func (i SettingsAuthenticationRuleSourceInterfaceArgs) ToSettingsAuthenticationRuleSourceInterfaceOutputWithContext(ctx context.Context) SettingsAuthenticationRuleSourceInterfaceOutput

type SettingsAuthenticationRuleSourceInterfaceArray 

type SettingsAuthenticationRuleSourceInterfaceArray []SettingsAuthenticationRuleSourceInterfaceInput

func (SettingsAuthenticationRuleSourceInterfaceArray) ElementType 

func (SettingsAuthenticationRuleSourceInterfaceArray) ElementType() reflect.Type

func (SettingsAuthenticationRuleSourceInterfaceArray) ToSettingsAuthenticationRuleSourceInterfaceArrayOutput 

func (i SettingsAuthenticationRuleSourceInterfaceArray) ToSettingsAuthenticationRuleSourceInterfaceArrayOutput() SettingsAuthenticationRuleSourceInterfaceArrayOutput

func (SettingsAuthenticationRuleSourceInterfaceArray) ToSettingsAuthenticationRuleSourceInterfaceArrayOutputWithContext 

func (i SettingsAuthenticationRuleSourceInterfaceArray) ToSettingsAuthenticationRuleSourceInterfaceArrayOutputWithContext(ctx context.Context) SettingsAuthenticationRuleSourceInterfaceArrayOutput

type SettingsAuthenticationRuleSourceInterfaceArrayInput 

type SettingsAuthenticationRuleSourceInterfaceArrayInput interface {
	pulumi.Input

	ToSettingsAuthenticationRuleSourceInterfaceArrayOutput() SettingsAuthenticationRuleSourceInterfaceArrayOutput
	ToSettingsAuthenticationRuleSourceInterfaceArrayOutputWithContext(context.Context) SettingsAuthenticationRuleSourceInterfaceArrayOutput
}

SettingsAuthenticationRuleSourceInterfaceArrayInput is an input type that accepts SettingsAuthenticationRuleSourceInterfaceArray and SettingsAuthenticationRuleSourceInterfaceArrayOutput values. You can construct a concrete instance of `SettingsAuthenticationRuleSourceInterfaceArrayInput` via: 

SettingsAuthenticationRuleSourceInterfaceArray{ SettingsAuthenticationRuleSourceInterfaceArgs{...} }

type SettingsAuthenticationRuleSourceInterfaceArrayOutput 

type SettingsAuthenticationRuleSourceInterfaceArrayOutput struct{ *pulumi.OutputState }

func (SettingsAuthenticationRuleSourceInterfaceArrayOutput) ElementType 

func (SettingsAuthenticationRuleSourceInterfaceArrayOutput) ElementType() reflect.Type

func (SettingsAuthenticationRuleSourceInterfaceArrayOutput) Index 

func (o SettingsAuthenticationRuleSourceInterfaceArrayOutput) Index(i pulumi.IntInput) SettingsAuthenticationRuleSourceInterfaceOutput

func (SettingsAuthenticationRuleSourceInterfaceArrayOutput) ToSettingsAuthenticationRuleSourceInterfaceArrayOutput 

func (o SettingsAuthenticationRuleSourceInterfaceArrayOutput) ToSettingsAuthenticationRuleSourceInterfaceArrayOutput() SettingsAuthenticationRuleSourceInterfaceArrayOutput

func (SettingsAuthenticationRuleSourceInterfaceArrayOutput) ToSettingsAuthenticationRuleSourceInterfaceArrayOutputWithContext 

func (o SettingsAuthenticationRuleSourceInterfaceArrayOutput) ToSettingsAuthenticationRuleSourceInterfaceArrayOutputWithContext(ctx context.Context) SettingsAuthenticationRuleSourceInterfaceArrayOutput

type SettingsAuthenticationRuleSourceInterfaceInput 

type SettingsAuthenticationRuleSourceInterfaceInput interface {
	pulumi.Input

	ToSettingsAuthenticationRuleSourceInterfaceOutput() SettingsAuthenticationRuleSourceInterfaceOutput
	ToSettingsAuthenticationRuleSourceInterfaceOutputWithContext(context.Context) SettingsAuthenticationRuleSourceInterfaceOutput
}

SettingsAuthenticationRuleSourceInterfaceInput is an input type that accepts SettingsAuthenticationRuleSourceInterfaceArgs and SettingsAuthenticationRuleSourceInterfaceOutput values. You can construct a concrete instance of `SettingsAuthenticationRuleSourceInterfaceInput` via: 

SettingsAuthenticationRuleSourceInterfaceArgs{...}

type SettingsAuthenticationRuleSourceInterfaceOutput 

type SettingsAuthenticationRuleSourceInterfaceOutput struct{ *pulumi.OutputState }

func (SettingsAuthenticationRuleSourceInterfaceOutput) ElementType 

func (SettingsAuthenticationRuleSourceInterfaceOutput) ElementType() reflect.Type

func (SettingsAuthenticationRuleSourceInterfaceOutput) Name 

func (o SettingsAuthenticationRuleSourceInterfaceOutput) Name() pulumi.StringPtrOutput

Interface name.

func (SettingsAuthenticationRuleSourceInterfaceOutput) ToSettingsAuthenticationRuleSourceInterfaceOutput 

func (o SettingsAuthenticationRuleSourceInterfaceOutput) ToSettingsAuthenticationRuleSourceInterfaceOutput() SettingsAuthenticationRuleSourceInterfaceOutput

func (SettingsAuthenticationRuleSourceInterfaceOutput) ToSettingsAuthenticationRuleSourceInterfaceOutputWithContext 

func (o SettingsAuthenticationRuleSourceInterfaceOutput) ToSettingsAuthenticationRuleSourceInterfaceOutputWithContext(ctx context.Context) SettingsAuthenticationRuleSourceInterfaceOutput

type SettingsAuthenticationRuleUser 

type SettingsAuthenticationRuleUser struct {
	// User name.
	Name *string `pulumi:"name"`
}

type SettingsAuthenticationRuleUserArgs 

type SettingsAuthenticationRuleUserArgs struct {
	// User name.
	Name pulumi.StringPtrInput `pulumi:"name"`
}

func (SettingsAuthenticationRuleUserArgs) ElementType 

func (SettingsAuthenticationRuleUserArgs) ElementType() reflect.Type

func (SettingsAuthenticationRuleUserArgs) ToSettingsAuthenticationRuleUserOutput 

func (i SettingsAuthenticationRuleUserArgs) ToSettingsAuthenticationRuleUserOutput() SettingsAuthenticationRuleUserOutput

func (SettingsAuthenticationRuleUserArgs) ToSettingsAuthenticationRuleUserOutputWithContext 

func (i SettingsAuthenticationRuleUserArgs) ToSettingsAuthenticationRuleUserOutputWithContext(ctx context.Context) SettingsAuthenticationRuleUserOutput

type SettingsAuthenticationRuleUserArray 

type SettingsAuthenticationRuleUserArray []SettingsAuthenticationRuleUserInput

func (SettingsAuthenticationRuleUserArray) ElementType 

func (SettingsAuthenticationRuleUserArray) ElementType() reflect.Type

func (SettingsAuthenticationRuleUserArray) ToSettingsAuthenticationRuleUserArrayOutput 

func (i SettingsAuthenticationRuleUserArray) ToSettingsAuthenticationRuleUserArrayOutput() SettingsAuthenticationRuleUserArrayOutput

func (SettingsAuthenticationRuleUserArray) ToSettingsAuthenticationRuleUserArrayOutputWithContext 

func (i SettingsAuthenticationRuleUserArray) ToSettingsAuthenticationRuleUserArrayOutputWithContext(ctx context.Context) SettingsAuthenticationRuleUserArrayOutput

type SettingsAuthenticationRuleUserArrayInput 

type SettingsAuthenticationRuleUserArrayInput interface {
	pulumi.Input

	ToSettingsAuthenticationRuleUserArrayOutput() SettingsAuthenticationRuleUserArrayOutput
	ToSettingsAuthenticationRuleUserArrayOutputWithContext(context.Context) SettingsAuthenticationRuleUserArrayOutput
}

SettingsAuthenticationRuleUserArrayInput is an input type that accepts SettingsAuthenticationRuleUserArray and SettingsAuthenticationRuleUserArrayOutput values. You can construct a concrete instance of `SettingsAuthenticationRuleUserArrayInput` via: 

SettingsAuthenticationRuleUserArray{ SettingsAuthenticationRuleUserArgs{...} }

type SettingsAuthenticationRuleUserArrayOutput 

type SettingsAuthenticationRuleUserArrayOutput struct{ *pulumi.OutputState }

func (SettingsAuthenticationRuleUserArrayOutput) ElementType 

func (SettingsAuthenticationRuleUserArrayOutput) ElementType() reflect.Type

func (SettingsAuthenticationRuleUserArrayOutput) Index 

func (o SettingsAuthenticationRuleUserArrayOutput) Index(i pulumi.IntInput) SettingsAuthenticationRuleUserOutput

func (SettingsAuthenticationRuleUserArrayOutput) ToSettingsAuthenticationRuleUserArrayOutput 

func (o SettingsAuthenticationRuleUserArrayOutput) ToSettingsAuthenticationRuleUserArrayOutput() SettingsAuthenticationRuleUserArrayOutput

func (SettingsAuthenticationRuleUserArrayOutput) ToSettingsAuthenticationRuleUserArrayOutputWithContext 

func (o SettingsAuthenticationRuleUserArrayOutput) ToSettingsAuthenticationRuleUserArrayOutputWithContext(ctx context.Context) SettingsAuthenticationRuleUserArrayOutput

type SettingsAuthenticationRuleUserInput 

type SettingsAuthenticationRuleUserInput interface {
	pulumi.Input

	ToSettingsAuthenticationRuleUserOutput() SettingsAuthenticationRuleUserOutput
	ToSettingsAuthenticationRuleUserOutputWithContext(context.Context) SettingsAuthenticationRuleUserOutput
}

SettingsAuthenticationRuleUserInput is an input type that accepts SettingsAuthenticationRuleUserArgs and SettingsAuthenticationRuleUserOutput values. You can construct a concrete instance of `SettingsAuthenticationRuleUserInput` via: 

SettingsAuthenticationRuleUserArgs{...}

type SettingsAuthenticationRuleUserOutput 

type SettingsAuthenticationRuleUserOutput struct{ *pulumi.OutputState }

func (SettingsAuthenticationRuleUserOutput) ElementType 

func (SettingsAuthenticationRuleUserOutput) ElementType() reflect.Type

func (SettingsAuthenticationRuleUserOutput) Name 

func (o SettingsAuthenticationRuleUserOutput) Name() pulumi.StringPtrOutput

User name.

func (SettingsAuthenticationRuleUserOutput) ToSettingsAuthenticationRuleUserOutput 

func (o SettingsAuthenticationRuleUserOutput) ToSettingsAuthenticationRuleUserOutput() SettingsAuthenticationRuleUserOutput

func (SettingsAuthenticationRuleUserOutput) ToSettingsAuthenticationRuleUserOutputWithContext 

func (o SettingsAuthenticationRuleUserOutput) ToSettingsAuthenticationRuleUserOutputWithContext(ctx context.Context) SettingsAuthenticationRuleUserOutput

type SettingsInput 

type SettingsInput interface {
	pulumi.Input

	ToSettingsOutput() SettingsOutput
	ToSettingsOutputWithContext(ctx context.Context) SettingsOutput
}

type SettingsMap 

type SettingsMap map[string]SettingsInput

func (SettingsMap) ElementType 

func (SettingsMap) ElementType() reflect.Type

func (SettingsMap) ToSettingsMapOutput 

func (i SettingsMap) ToSettingsMapOutput() SettingsMapOutput

func (SettingsMap) ToSettingsMapOutputWithContext 

func (i SettingsMap) ToSettingsMapOutputWithContext(ctx context.Context) SettingsMapOutput

type SettingsMapInput 

type SettingsMapInput interface {
	pulumi.Input

	ToSettingsMapOutput() SettingsMapOutput
	ToSettingsMapOutputWithContext(context.Context) SettingsMapOutput
}

SettingsMapInput is an input type that accepts SettingsMap and SettingsMapOutput values. You can construct a concrete instance of `SettingsMapInput` via: 

SettingsMap{ "key": SettingsArgs{...} }

type SettingsMapOutput 

type SettingsMapOutput struct{ *pulumi.OutputState }

func (SettingsMapOutput) ElementType 

func (SettingsMapOutput) ElementType() reflect.Type

func (SettingsMapOutput) MapIndex 

func (o SettingsMapOutput) MapIndex(k pulumi.StringInput) SettingsOutput

func (SettingsMapOutput) ToSettingsMapOutput 

func (o SettingsMapOutput) ToSettingsMapOutput() SettingsMapOutput

func (SettingsMapOutput) ToSettingsMapOutputWithContext 

func (o SettingsMapOutput) ToSettingsMapOutputWithContext(ctx context.Context) SettingsMapOutput

type SettingsOutput 

type SettingsOutput struct{ *pulumi.OutputState }

func (SettingsOutput) Algorithm 

func (o SettingsOutput) Algorithm() pulumi.StringOutput

Force the SSL-VPN security level. High allows only high. Medium allows medium and high. Low allows any. Valid values: `high`, `medium`, `default`, `low`.

func (SettingsOutput) AuthSessionCheckSourceIp 

func (o SettingsOutput) AuthSessionCheckSourceIp() pulumi.StringOutput

Enable/disable checking of source IP for authentication session. Valid values: `enable`, `disable`.

func (SettingsOutput) AuthTimeout 

func (o SettingsOutput) AuthTimeout() pulumi.IntOutput

SSL-VPN authentication timeout (1 - 259200 sec (3 days), 0 for no timeout).

func (SettingsOutput) AuthenticationRules 

func (o SettingsOutput) AuthenticationRules() SettingsAuthenticationRuleArrayOutput

Authentication rule for SSL VPN. The structure of `authenticationRule` block is documented below.

func (SettingsOutput) AutoTunnelStaticRoute 

func (o SettingsOutput) AutoTunnelStaticRoute() pulumi.StringOutput

Enable to auto-create static routes for the SSL-VPN tunnel IP addresses. Valid values: `enable`, `disable`.

func (SettingsOutput) BannedCipher 

func (o SettingsOutput) BannedCipher() pulumi.StringOutput

Select one or more cipher technologies that cannot be used in SSL-VPN negotiations.

func (SettingsOutput) BrowserLanguageDetection 

func (o SettingsOutput) BrowserLanguageDetection() pulumi.StringOutput

Enable/disable overriding the configured system language based on the preferred language of the browser. Valid values: `enable`, `disable`.

func (SettingsOutput) CheckReferer 

func (o SettingsOutput) CheckReferer() pulumi.StringOutput

Enable/disable verification of referer field in HTTP request header. Valid values: `enable`, `disable`.

func (SettingsOutput) Ciphersuite 

func (o SettingsOutput) Ciphersuite() pulumi.StringOutput

Select one or more TLS 1.3 ciphersuites to enable. Does not affect ciphers in TLS 1.2 and below. At least one must be enabled. To disable all, set ssl-max-proto-ver to tls1-2 or below. Valid values: `TLS-AES-128-GCM-SHA256`, `TLS-AES-256-GCM-SHA384`, `TLS-CHACHA20-POLY1305-SHA256`, `TLS-AES-128-CCM-SHA256`, `TLS-AES-128-CCM-8-SHA256`.

func (SettingsOutput) ClientSigalgs 

func (o SettingsOutput) ClientSigalgs() pulumi.StringOutput

Set signature algorithms related to client authentication. Affects TLS version <= 1.2 only. Valid values: `no-rsa-pss`, `all`.

func (SettingsOutput) DefaultPortal 

func (o SettingsOutput) DefaultPortal() pulumi.StringOutput

Default SSL VPN portal.

func (SettingsOutput) DeflateCompressionLevel 

func (o SettingsOutput) DeflateCompressionLevel() pulumi.IntOutput

Compression level (0~9).

func (SettingsOutput) DeflateMinDataSize 

func (o SettingsOutput) DeflateMinDataSize() pulumi.IntOutput

Minimum amount of data that triggers compression (200 - 65535 bytes).

func (SettingsOutput) DnsServer1 

func (o SettingsOutput) DnsServer1() pulumi.StringOutput

DNS server 1.

func (SettingsOutput) DnsServer2 

func (o SettingsOutput) DnsServer2() pulumi.StringOutput

DNS server 2.

func (SettingsOutput) DnsSuffix 

func (o SettingsOutput) DnsSuffix() pulumi.StringPtrOutput

DNS suffix used for SSL-VPN clients.

func (SettingsOutput) DtlsHeartbeatFailCount 

func (o SettingsOutput) DtlsHeartbeatFailCount() pulumi.IntOutput

Number of missing heartbeats before the connection is considered dropped.

func (SettingsOutput) DtlsHeartbeatIdleTimeout 

func (o SettingsOutput) DtlsHeartbeatIdleTimeout() pulumi.IntOutput

Idle timeout before DTLS heartbeat is sent.

func (SettingsOutput) DtlsHeartbeatInterval 

func (o SettingsOutput) DtlsHeartbeatInterval() pulumi.IntOutput

Interval between DTLS heartbeat.

func (SettingsOutput) DtlsHelloTimeout 

func (o SettingsOutput) DtlsHelloTimeout() pulumi.IntOutput

SSLVPN maximum DTLS hello timeout (10 - 60 sec, default = 10).

func (SettingsOutput) DtlsMaxProtoVer 

func (o SettingsOutput) DtlsMaxProtoVer() pulumi.StringOutput

DTLS maximum protocol version. Valid values: `dtls1-0`, `dtls1-2`.

func (SettingsOutput) DtlsMinProtoVer 

func (o SettingsOutput) DtlsMinProtoVer() pulumi.StringOutput

DTLS minimum protocol version. Valid values: `dtls1-0`, `dtls1-2`.

func (SettingsOutput) DtlsTunnel 

func (o SettingsOutput) DtlsTunnel() pulumi.StringOutput

Enable DTLS to prevent eavesdropping, tampering, or message forgery. Valid values: `enable`, `disable`.

func (SettingsOutput) DualStackMode 

func (o SettingsOutput) DualStackMode() pulumi.StringOutput

Tunnel mode: enable parallel IPv4 and IPv6 tunnel. Web mode: support IPv4 and IPv6 bookmarks in the portal. Valid values: `enable`, `disable`.

func (SettingsOutput) DynamicSortSubtable 

func (o SettingsOutput) DynamicSortSubtable() pulumi.StringPtrOutput

Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].

func (SettingsOutput) ElementType 

func (SettingsOutput) ElementType() reflect.Type

func (SettingsOutput) Encode2fSequence 

func (o SettingsOutput) Encode2fSequence() pulumi.StringOutput

Encode \2F sequence to forward slash in URLs. Valid values: `enable`, `disable`.

func (SettingsOutput) EncryptAndStorePassword 

func (o SettingsOutput) EncryptAndStorePassword() pulumi.StringOutput

Encrypt and store user passwords for SSL-VPN web sessions. Valid values: `enable`, `disable`.

func (SettingsOutput) ForceTwoFactorAuth 

func (o SettingsOutput) ForceTwoFactorAuth() pulumi.StringOutput

Enable to force two-factor authentication for all SSL-VPNs. Valid values: `enable`, `disable`.

func (SettingsOutput) GetAllTables 

func (o SettingsOutput) GetAllTables() pulumi.StringPtrOutput

Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwish conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.

func (SettingsOutput) HeaderXForwardedFor 

func (o SettingsOutput) HeaderXForwardedFor() pulumi.StringOutput

Forward the same, add, or remove HTTP header. Valid values: `pass`, `add`, `remove`.

func (SettingsOutput) HstsIncludeSubdomains 

func (o SettingsOutput) HstsIncludeSubdomains() pulumi.StringOutput

Add HSTS includeSubDomains response header. Valid values: `enable`, `disable`.

func (SettingsOutput) HttpCompression 

func (o SettingsOutput) HttpCompression() pulumi.StringOutput

Enable to allow HTTP compression over SSL-VPN tunnels. Valid values: `enable`, `disable`.

func (SettingsOutput) HttpOnlyCookie 

func (o SettingsOutput) HttpOnlyCookie() pulumi.StringOutput

Enable/disable SSL-VPN support for HttpOnly cookies. Valid values: `enable`, `disable`.

func (SettingsOutput) HttpRequestBodyTimeout 

func (o SettingsOutput) HttpRequestBodyTimeout() pulumi.IntOutput

SSL-VPN session is disconnected if an HTTP request body is not received within this time (1 - 60 sec, default = 20).

func (SettingsOutput) HttpRequestHeaderTimeout 

func (o SettingsOutput) HttpRequestHeaderTimeout() pulumi.IntOutput

SSL-VPN session is disconnected if an HTTP request header is not received within this time (1 - 60 sec, default = 20).

func (SettingsOutput) HttpsRedirect 

func (o SettingsOutput) HttpsRedirect() pulumi.StringOutput

Enable/disable redirect of port 80 to SSL-VPN port. Valid values: `enable`, `disable`.

func (SettingsOutput) IdleTimeout 

func (o SettingsOutput) IdleTimeout() pulumi.IntOutput

SSL VPN disconnects if idle for specified time in seconds.

func (SettingsOutput) Ipv6DnsServer1 

func (o SettingsOutput) Ipv6DnsServer1() pulumi.StringOutput

IPv6 DNS server 1.

func (SettingsOutput) Ipv6DnsServer2 

func (o SettingsOutput) Ipv6DnsServer2() pulumi.StringOutput

IPv6 DNS server 2.

func (SettingsOutput) Ipv6WinsServer1 

func (o SettingsOutput) Ipv6WinsServer1() pulumi.StringOutput

IPv6 WINS server 1.

func (SettingsOutput) Ipv6WinsServer2 

func (o SettingsOutput) Ipv6WinsServer2() pulumi.StringOutput

IPv6 WINS server 2.

func (SettingsOutput) LoginAttemptLimit 

func (o SettingsOutput) LoginAttemptLimit() pulumi.IntOutput

SSL VPN maximum login attempt times before block (0 - 10, default = 2, 0 = no limit).

func (SettingsOutput) LoginBlockTime 

func (o SettingsOutput) LoginBlockTime() pulumi.IntOutput

Time for which a user is blocked from logging in after too many failed login attempts (0 - 86400 sec, default = 60).

func (SettingsOutput) LoginTimeout 

func (o SettingsOutput) LoginTimeout() pulumi.IntOutput

SSLVPN maximum login timeout (10 - 180 sec, default = 30).

func (SettingsOutput) Port 

func (o SettingsOutput) Port() pulumi.IntOutput

SSL-VPN access port (1 - 65535).

func (SettingsOutput) PortPrecedence 

func (o SettingsOutput) PortPrecedence() pulumi.StringOutput

Enable means that if SSL-VPN connections are allowed on an interface admin GUI connections are blocked on that interface. Valid values: `enable`, `disable`.

func (SettingsOutput) Reqclientcert 

func (o SettingsOutput) Reqclientcert() pulumi.StringOutput

Enable to require client certificates for all SSL-VPN users. Valid values: `enable`, `disable`.

func (SettingsOutput) RouteSourceInterface 

func (o SettingsOutput) RouteSourceInterface() pulumi.StringOutput

Enable to allow SSL-VPN sessions to bypass routing and bind to the incoming interface. Valid values: `enable`, `disable`.

func (SettingsOutput) SamlRedirectPort 

func (o SettingsOutput) SamlRedirectPort() pulumi.IntOutput

SAML local redirect port in the machine running FCT (0 - 65535). 0 is to disable redirection on FGT side.

func (SettingsOutput) ServerHostname 

func (o SettingsOutput) ServerHostname() pulumi.StringOutput

Server hostname for HTTPS. When set, will be used for SSL VPN web proxy host header for any redirection.

func (SettingsOutput) Servercert 

func (o SettingsOutput) Servercert() pulumi.StringOutput

Name of the server certificate to be used for SSL-VPNs.

func (SettingsOutput) SourceAddress6Negate 

func (o SettingsOutput) SourceAddress6Negate() pulumi.StringOutput

Enable/disable negated source IPv6 address match. Valid values: `enable`, `disable`.

func (SettingsOutput) SourceAddress6s 

func (o SettingsOutput) SourceAddress6s() SettingsSourceAddress6ArrayOutput

IPv6 source address of incoming traffic. The structure of `sourceAddress6` block is documented below.

func (SettingsOutput) SourceAddressNegate 

func (o SettingsOutput) SourceAddressNegate() pulumi.StringOutput

Enable/disable negated source address match. Valid values: `enable`, `disable`.

func (SettingsOutput) SourceAddresses 

func (o SettingsOutput) SourceAddresses() SettingsSourceAddressArrayOutput

Source address of incoming traffic. The structure of `sourceAddress` block is documented below.

func (SettingsOutput) SourceInterfaces 

func (o SettingsOutput) SourceInterfaces() SettingsSourceInterfaceArrayOutput

SSL VPN source interface of incoming traffic. The structure of `sourceInterface` block is documented below.

func (SettingsOutput) SslClientRenegotiation 

func (o SettingsOutput) SslClientRenegotiation() pulumi.StringOutput

Enable to allow client renegotiation by the server if the tunnel goes down. Valid values: `disable`, `enable`.

func (SettingsOutput) SslInsertEmptyFragment 

func (o SettingsOutput) SslInsertEmptyFragment() pulumi.StringOutput

Enable/disable insertion of empty fragment. Valid values: `enable`, `disable`.

func (SettingsOutput) SslMaxProtoVer 

func (o SettingsOutput) SslMaxProtoVer() pulumi.StringOutput

SSL maximum protocol version. Valid values: `tls1-0`, `tls1-1`, `tls1-2`, `tls1-3`.

func (SettingsOutput) SslMinProtoVer 

func (o SettingsOutput) SslMinProtoVer() pulumi.StringOutput

SSL minimum protocol version. Valid values: `tls1-0`, `tls1-1`, `tls1-2`, `tls1-3`.

func (SettingsOutput) Status 

func (o SettingsOutput) Status() pulumi.StringOutput

Enable/disable SSL-VPN. Valid values: `enable`, `disable`.

func (SettingsOutput) Tlsv10 

func (o SettingsOutput) Tlsv10() pulumi.StringOutput

Enable/disable TLSv1.0. Valid values: `enable`, `disable`.

func (SettingsOutput) Tlsv11 

func (o SettingsOutput) Tlsv11() pulumi.StringOutput

Enable/disable TLSv1.1. Valid values: `enable`, `disable`.

func (SettingsOutput) Tlsv12 

func (o SettingsOutput) Tlsv12() pulumi.StringOutput

Enable/disable TLSv1.2. Valid values: `enable`, `disable`.

func (SettingsOutput) Tlsv13 

func (o SettingsOutput) Tlsv13() pulumi.StringOutput

Enable/disable TLSv1.3. Valid values: `enable`, `disable`.

func (SettingsOutput) ToSettingsOutput 

func (o SettingsOutput) ToSettingsOutput() SettingsOutput

func (SettingsOutput) ToSettingsOutputWithContext 

func (o SettingsOutput) ToSettingsOutputWithContext(ctx context.Context) SettingsOutput

func (SettingsOutput) TransformBackwardSlashes 

func (o SettingsOutput) TransformBackwardSlashes() pulumi.StringOutput

Transform backward slashes to forward slashes in URLs. Valid values: `enable`, `disable`.

func (SettingsOutput) TunnelAddrAssignedMethod 

func (o SettingsOutput) TunnelAddrAssignedMethod() pulumi.StringOutput

Method used for assigning address for tunnel. Valid values: `first-available`, `round-robin`.

func (SettingsOutput) TunnelConnectWithoutReauth 

func (o SettingsOutput) TunnelConnectWithoutReauth() pulumi.StringOutput

Enable/disable tunnel connection without re-authorization if previous connection dropped. Valid values: `enable`, `disable`.

func (SettingsOutput) TunnelIpPools 

func (o SettingsOutput) TunnelIpPools() SettingsTunnelIpPoolArrayOutput

Names of the IPv4 IP Pool firewall objects that define the IP addresses reserved for remote clients. The structure of `tunnelIpPools` block is documented below.

func (SettingsOutput) TunnelIpv6Pools 

func (o SettingsOutput) TunnelIpv6Pools() SettingsTunnelIpv6PoolArrayOutput

Names of the IPv6 IP Pool firewall objects that define the IP addresses reserved for remote clients. The structure of `tunnelIpv6Pools` block is documented below.

func (SettingsOutput) TunnelUserSessionTimeout 

func (o SettingsOutput) TunnelUserSessionTimeout() pulumi.IntOutput

Time out value to clean up user session after tunnel connection is dropped (1 - 255 sec, default=30).

func (SettingsOutput) UnsafeLegacyRenegotiation 

func (o SettingsOutput) UnsafeLegacyRenegotiation() pulumi.StringOutput

Enable/disable unsafe legacy re-negotiation. Valid values: `enable`, `disable`.

func (SettingsOutput) UrlObscuration 

func (o SettingsOutput) UrlObscuration() pulumi.StringOutput

Enable to obscure the host name of the URL of the web browser display. Valid values: `enable`, `disable`.

func (SettingsOutput) UserPeer 

func (o SettingsOutput) UserPeer() pulumi.StringOutput

Name of user peer.

func (SettingsOutput) Vdomparam 

func (o SettingsOutput) Vdomparam() pulumi.StringPtrOutput

Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

func (SettingsOutput) WebModeSnat 

func (o SettingsOutput) WebModeSnat() pulumi.StringOutput

Enable/disable use of IP pools defined in firewall policy while using web-mode. Valid values: `enable`, `disable`.

func (SettingsOutput) WinsServer1 

func (o SettingsOutput) WinsServer1() pulumi.StringOutput

WINS server 1.

func (SettingsOutput) WinsServer2 

func (o SettingsOutput) WinsServer2() pulumi.StringOutput

WINS server 2.

func (SettingsOutput) XContentTypeOptions 

func (o SettingsOutput) XContentTypeOptions() pulumi.StringOutput

Add HTTP X-Content-Type-Options header. Valid values: `enable`, `disable`.

func (SettingsOutput) ZtnaTrustedClient 

func (o SettingsOutput) ZtnaTrustedClient() pulumi.StringOutput

Enable/disable verification of device certificate for SSLVPN ZTNA session. Valid values: `enable`, `disable`.

type SettingsSourceAddress 

type SettingsSourceAddress struct {
	// IPv6 address name.
	Name *string `pulumi:"name"`
}

type SettingsSourceAddress6 

type SettingsSourceAddress6 struct {
	// Group name.
	Name *string `pulumi:"name"`
}

type SettingsSourceAddress6Args 

type SettingsSourceAddress6Args struct {
	// Group name.
	Name pulumi.StringPtrInput `pulumi:"name"`
}

func (SettingsSourceAddress6Args) ElementType 

func (SettingsSourceAddress6Args) ElementType() reflect.Type

func (SettingsSourceAddress6Args) ToSettingsSourceAddress6Output 

func (i SettingsSourceAddress6Args) ToSettingsSourceAddress6Output() SettingsSourceAddress6Output

func (SettingsSourceAddress6Args) ToSettingsSourceAddress6OutputWithContext 

func (i SettingsSourceAddress6Args) ToSettingsSourceAddress6OutputWithContext(ctx context.Context) SettingsSourceAddress6Output

type SettingsSourceAddress6Array 

type SettingsSourceAddress6Array []SettingsSourceAddress6Input

func (SettingsSourceAddress6Array) ElementType 

func (SettingsSourceAddress6Array) ElementType() reflect.Type

func (SettingsSourceAddress6Array) ToSettingsSourceAddress6ArrayOutput 

func (i SettingsSourceAddress6Array) ToSettingsSourceAddress6ArrayOutput() SettingsSourceAddress6ArrayOutput

func (SettingsSourceAddress6Array) ToSettingsSourceAddress6ArrayOutputWithContext 

func (i SettingsSourceAddress6Array) ToSettingsSourceAddress6ArrayOutputWithContext(ctx context.Context) SettingsSourceAddress6ArrayOutput

type SettingsSourceAddress6ArrayInput 

type SettingsSourceAddress6ArrayInput interface {
	pulumi.Input

	ToSettingsSourceAddress6ArrayOutput() SettingsSourceAddress6ArrayOutput
	ToSettingsSourceAddress6ArrayOutputWithContext(context.Context) SettingsSourceAddress6ArrayOutput
}

SettingsSourceAddress6ArrayInput is an input type that accepts SettingsSourceAddress6Array and SettingsSourceAddress6ArrayOutput values. You can construct a concrete instance of `SettingsSourceAddress6ArrayInput` via: 

SettingsSourceAddress6Array{ SettingsSourceAddress6Args{...} }

type SettingsSourceAddress6ArrayOutput 

type SettingsSourceAddress6ArrayOutput struct{ *pulumi.OutputState }

func (SettingsSourceAddress6ArrayOutput) ElementType 

func (SettingsSourceAddress6ArrayOutput) ElementType() reflect.Type

func (SettingsSourceAddress6ArrayOutput) Index 

func (o SettingsSourceAddress6ArrayOutput) Index(i pulumi.IntInput) SettingsSourceAddress6Output

func (SettingsSourceAddress6ArrayOutput) ToSettingsSourceAddress6ArrayOutput 

func (o SettingsSourceAddress6ArrayOutput) ToSettingsSourceAddress6ArrayOutput() SettingsSourceAddress6ArrayOutput

func (SettingsSourceAddress6ArrayOutput) ToSettingsSourceAddress6ArrayOutputWithContext 

func (o SettingsSourceAddress6ArrayOutput) ToSettingsSourceAddress6ArrayOutputWithContext(ctx context.Context) SettingsSourceAddress6ArrayOutput

type SettingsSourceAddress6Input 

type SettingsSourceAddress6Input interface {
	pulumi.Input

	ToSettingsSourceAddress6Output() SettingsSourceAddress6Output
	ToSettingsSourceAddress6OutputWithContext(context.Context) SettingsSourceAddress6Output
}

SettingsSourceAddress6Input is an input type that accepts SettingsSourceAddress6Args and SettingsSourceAddress6Output values. You can construct a concrete instance of `SettingsSourceAddress6Input` via: 

SettingsSourceAddress6Args{...}

type SettingsSourceAddress6Output 

type SettingsSourceAddress6Output struct{ *pulumi.OutputState }

func (SettingsSourceAddress6Output) ElementType 

func (SettingsSourceAddress6Output) ElementType() reflect.Type

func (SettingsSourceAddress6Output) Name 

func (o SettingsSourceAddress6Output) Name() pulumi.StringPtrOutput

Group name.

func (SettingsSourceAddress6Output) ToSettingsSourceAddress6Output 

func (o SettingsSourceAddress6Output) ToSettingsSourceAddress6Output() SettingsSourceAddress6Output

func (SettingsSourceAddress6Output) ToSettingsSourceAddress6OutputWithContext 

func (o SettingsSourceAddress6Output) ToSettingsSourceAddress6OutputWithContext(ctx context.Context) SettingsSourceAddress6Output

type SettingsSourceAddressArgs 

type SettingsSourceAddressArgs struct {
	// IPv6 address name.
	Name pulumi.StringPtrInput `pulumi:"name"`
}

func (SettingsSourceAddressArgs) ElementType 

func (SettingsSourceAddressArgs) ElementType() reflect.Type

func (SettingsSourceAddressArgs) ToSettingsSourceAddressOutput 

func (i SettingsSourceAddressArgs) ToSettingsSourceAddressOutput() SettingsSourceAddressOutput

func (SettingsSourceAddressArgs) ToSettingsSourceAddressOutputWithContext 

func (i SettingsSourceAddressArgs) ToSettingsSourceAddressOutputWithContext(ctx context.Context) SettingsSourceAddressOutput

type SettingsSourceAddressArray 

type SettingsSourceAddressArray []SettingsSourceAddressInput

func (SettingsSourceAddressArray) ElementType 

func (SettingsSourceAddressArray) ElementType() reflect.Type

func (SettingsSourceAddressArray) ToSettingsSourceAddressArrayOutput 

func (i SettingsSourceAddressArray) ToSettingsSourceAddressArrayOutput() SettingsSourceAddressArrayOutput

func (SettingsSourceAddressArray) ToSettingsSourceAddressArrayOutputWithContext 

func (i SettingsSourceAddressArray) ToSettingsSourceAddressArrayOutputWithContext(ctx context.Context) SettingsSourceAddressArrayOutput

type SettingsSourceAddressArrayInput 

type SettingsSourceAddressArrayInput interface {
	pulumi.Input

	ToSettingsSourceAddressArrayOutput() SettingsSourceAddressArrayOutput
	ToSettingsSourceAddressArrayOutputWithContext(context.Context) SettingsSourceAddressArrayOutput
}

SettingsSourceAddressArrayInput is an input type that accepts SettingsSourceAddressArray and SettingsSourceAddressArrayOutput values. You can construct a concrete instance of `SettingsSourceAddressArrayInput` via: 

SettingsSourceAddressArray{ SettingsSourceAddressArgs{...} }

type SettingsSourceAddressArrayOutput 

type SettingsSourceAddressArrayOutput struct{ *pulumi.OutputState }

func (SettingsSourceAddressArrayOutput) ElementType 

func (SettingsSourceAddressArrayOutput) ElementType() reflect.Type

func (SettingsSourceAddressArrayOutput) Index 

func (o SettingsSourceAddressArrayOutput) Index(i pulumi.IntInput) SettingsSourceAddressOutput

func (SettingsSourceAddressArrayOutput) ToSettingsSourceAddressArrayOutput 

func (o SettingsSourceAddressArrayOutput) ToSettingsSourceAddressArrayOutput() SettingsSourceAddressArrayOutput

func (SettingsSourceAddressArrayOutput) ToSettingsSourceAddressArrayOutputWithContext 

func (o SettingsSourceAddressArrayOutput) ToSettingsSourceAddressArrayOutputWithContext(ctx context.Context) SettingsSourceAddressArrayOutput

type SettingsSourceAddressInput 

type SettingsSourceAddressInput interface {
	pulumi.Input

	ToSettingsSourceAddressOutput() SettingsSourceAddressOutput
	ToSettingsSourceAddressOutputWithContext(context.Context) SettingsSourceAddressOutput
}

SettingsSourceAddressInput is an input type that accepts SettingsSourceAddressArgs and SettingsSourceAddressOutput values. You can construct a concrete instance of `SettingsSourceAddressInput` via: 

SettingsSourceAddressArgs{...}

type SettingsSourceAddressOutput 

type SettingsSourceAddressOutput struct{ *pulumi.OutputState }

func (SettingsSourceAddressOutput) ElementType 

func (SettingsSourceAddressOutput) ElementType() reflect.Type

func (SettingsSourceAddressOutput) Name 

func (o SettingsSourceAddressOutput) Name() pulumi.StringPtrOutput

IPv6 address name.

func (SettingsSourceAddressOutput) ToSettingsSourceAddressOutput 

func (o SettingsSourceAddressOutput) ToSettingsSourceAddressOutput() SettingsSourceAddressOutput

func (SettingsSourceAddressOutput) ToSettingsSourceAddressOutputWithContext 

func (o SettingsSourceAddressOutput) ToSettingsSourceAddressOutputWithContext(ctx context.Context) SettingsSourceAddressOutput

type SettingsSourceInterface 

type SettingsSourceInterface struct {
	// Interface name.
	Name *string `pulumi:"name"`
}

type SettingsSourceInterfaceArgs 

type SettingsSourceInterfaceArgs struct {
	// Interface name.
	Name pulumi.StringPtrInput `pulumi:"name"`
}

func (SettingsSourceInterfaceArgs) ElementType 

func (SettingsSourceInterfaceArgs) ElementType() reflect.Type

func (SettingsSourceInterfaceArgs) ToSettingsSourceInterfaceOutput 

func (i SettingsSourceInterfaceArgs) ToSettingsSourceInterfaceOutput() SettingsSourceInterfaceOutput

func (SettingsSourceInterfaceArgs) ToSettingsSourceInterfaceOutputWithContext 

func (i SettingsSourceInterfaceArgs) ToSettingsSourceInterfaceOutputWithContext(ctx context.Context) SettingsSourceInterfaceOutput

type SettingsSourceInterfaceArray 

type SettingsSourceInterfaceArray []SettingsSourceInterfaceInput

func (SettingsSourceInterfaceArray) ElementType 

func (SettingsSourceInterfaceArray) ElementType() reflect.Type

func (SettingsSourceInterfaceArray) ToSettingsSourceInterfaceArrayOutput 

func (i SettingsSourceInterfaceArray) ToSettingsSourceInterfaceArrayOutput() SettingsSourceInterfaceArrayOutput

func (SettingsSourceInterfaceArray) ToSettingsSourceInterfaceArrayOutputWithContext 

func (i SettingsSourceInterfaceArray) ToSettingsSourceInterfaceArrayOutputWithContext(ctx context.Context) SettingsSourceInterfaceArrayOutput

type SettingsSourceInterfaceArrayInput 

type SettingsSourceInterfaceArrayInput interface {
	pulumi.Input

	ToSettingsSourceInterfaceArrayOutput() SettingsSourceInterfaceArrayOutput
	ToSettingsSourceInterfaceArrayOutputWithContext(context.Context) SettingsSourceInterfaceArrayOutput
}

SettingsSourceInterfaceArrayInput is an input type that accepts SettingsSourceInterfaceArray and SettingsSourceInterfaceArrayOutput values. You can construct a concrete instance of `SettingsSourceInterfaceArrayInput` via: 

SettingsSourceInterfaceArray{ SettingsSourceInterfaceArgs{...} }

type SettingsSourceInterfaceArrayOutput 

type SettingsSourceInterfaceArrayOutput struct{ *pulumi.OutputState }

func (SettingsSourceInterfaceArrayOutput) ElementType 

func (SettingsSourceInterfaceArrayOutput) ElementType() reflect.Type

func (SettingsSourceInterfaceArrayOutput) Index 

func (o SettingsSourceInterfaceArrayOutput) Index(i pulumi.IntInput) SettingsSourceInterfaceOutput

func (SettingsSourceInterfaceArrayOutput) ToSettingsSourceInterfaceArrayOutput 

func (o SettingsSourceInterfaceArrayOutput) ToSettingsSourceInterfaceArrayOutput() SettingsSourceInterfaceArrayOutput

func (SettingsSourceInterfaceArrayOutput) ToSettingsSourceInterfaceArrayOutputWithContext 

func (o SettingsSourceInterfaceArrayOutput) ToSettingsSourceInterfaceArrayOutputWithContext(ctx context.Context) SettingsSourceInterfaceArrayOutput

type SettingsSourceInterfaceInput 

type SettingsSourceInterfaceInput interface {
	pulumi.Input

	ToSettingsSourceInterfaceOutput() SettingsSourceInterfaceOutput
	ToSettingsSourceInterfaceOutputWithContext(context.Context) SettingsSourceInterfaceOutput
}

SettingsSourceInterfaceInput is an input type that accepts SettingsSourceInterfaceArgs and SettingsSourceInterfaceOutput values. You can construct a concrete instance of `SettingsSourceInterfaceInput` via: 

SettingsSourceInterfaceArgs{...}

type SettingsSourceInterfaceOutput 

type SettingsSourceInterfaceOutput struct{ *pulumi.OutputState }

func (SettingsSourceInterfaceOutput) ElementType 

func (SettingsSourceInterfaceOutput) ElementType() reflect.Type

func (SettingsSourceInterfaceOutput) Name 

func (o SettingsSourceInterfaceOutput) Name() pulumi.StringPtrOutput

Interface name.

func (SettingsSourceInterfaceOutput) ToSettingsSourceInterfaceOutput 

func (o SettingsSourceInterfaceOutput) ToSettingsSourceInterfaceOutput() SettingsSourceInterfaceOutput

func (SettingsSourceInterfaceOutput) ToSettingsSourceInterfaceOutputWithContext 

func (o SettingsSourceInterfaceOutput) ToSettingsSourceInterfaceOutputWithContext(ctx context.Context) SettingsSourceInterfaceOutput

type SettingsState 

type SettingsState struct {
	// Force the SSL-VPN security level. High allows only high. Medium allows medium and high. Low allows any. Valid values: `high`, `medium`, `default`, `low`.
	Algorithm pulumi.StringPtrInput
	// Enable/disable checking of source IP for authentication session. Valid values: `enable`, `disable`.
	AuthSessionCheckSourceIp pulumi.StringPtrInput
	// SSL-VPN authentication timeout (1 - 259200 sec (3 days), 0 for no timeout).
	AuthTimeout pulumi.IntPtrInput
	// Authentication rule for SSL VPN. The structure of `authenticationRule` block is documented below.
	AuthenticationRules SettingsAuthenticationRuleArrayInput
	// Enable to auto-create static routes for the SSL-VPN tunnel IP addresses. Valid values: `enable`, `disable`.
	AutoTunnelStaticRoute pulumi.StringPtrInput
	// Select one or more cipher technologies that cannot be used in SSL-VPN negotiations.
	BannedCipher pulumi.StringPtrInput
	// Enable/disable overriding the configured system language based on the preferred language of the browser. Valid values: `enable`, `disable`.
	BrowserLanguageDetection pulumi.StringPtrInput
	// Enable/disable verification of referer field in HTTP request header. Valid values: `enable`, `disable`.
	CheckReferer pulumi.StringPtrInput
	// Select one or more TLS 1.3 ciphersuites to enable. Does not affect ciphers in TLS 1.2 and below. At least one must be enabled. To disable all, set ssl-max-proto-ver to tls1-2 or below. Valid values: `TLS-AES-128-GCM-SHA256`, `TLS-AES-256-GCM-SHA384`, `TLS-CHACHA20-POLY1305-SHA256`, `TLS-AES-128-CCM-SHA256`, `TLS-AES-128-CCM-8-SHA256`.
	Ciphersuite pulumi.StringPtrInput
	// Set signature algorithms related to client authentication. Affects TLS version <= 1.2 only. Valid values: `no-rsa-pss`, `all`.
	ClientSigalgs pulumi.StringPtrInput
	// Default SSL VPN portal.
	DefaultPortal pulumi.StringPtrInput
	// Compression level (0~9).
	DeflateCompressionLevel pulumi.IntPtrInput
	// Minimum amount of data that triggers compression (200 - 65535 bytes).
	DeflateMinDataSize pulumi.IntPtrInput
	// DNS server 1.
	DnsServer1 pulumi.StringPtrInput
	// DNS server 2.
	DnsServer2 pulumi.StringPtrInput
	// DNS suffix used for SSL-VPN clients.
	DnsSuffix pulumi.StringPtrInput
	// Number of missing heartbeats before the connection is considered dropped.
	DtlsHeartbeatFailCount pulumi.IntPtrInput
	// Idle timeout before DTLS heartbeat is sent.
	DtlsHeartbeatIdleTimeout pulumi.IntPtrInput
	// Interval between DTLS heartbeat.
	DtlsHeartbeatInterval pulumi.IntPtrInput
	// SSLVPN maximum DTLS hello timeout (10 - 60 sec, default = 10).
	DtlsHelloTimeout pulumi.IntPtrInput
	// DTLS maximum protocol version. Valid values: `dtls1-0`, `dtls1-2`.
	DtlsMaxProtoVer pulumi.StringPtrInput
	// DTLS minimum protocol version. Valid values: `dtls1-0`, `dtls1-2`.
	DtlsMinProtoVer pulumi.StringPtrInput
	// Enable DTLS to prevent eavesdropping, tampering, or message forgery. Valid values: `enable`, `disable`.
	DtlsTunnel pulumi.StringPtrInput
	// Tunnel mode: enable parallel IPv4 and IPv6 tunnel. Web mode: support IPv4 and IPv6 bookmarks in the portal. Valid values: `enable`, `disable`.
	DualStackMode pulumi.StringPtrInput
	// Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
	DynamicSortSubtable pulumi.StringPtrInput
	// Encode \2F sequence to forward slash in URLs. Valid values: `enable`, `disable`.
	Encode2fSequence pulumi.StringPtrInput
	// Encrypt and store user passwords for SSL-VPN web sessions. Valid values: `enable`, `disable`.
	EncryptAndStorePassword pulumi.StringPtrInput
	// Enable to force two-factor authentication for all SSL-VPNs. Valid values: `enable`, `disable`.
	ForceTwoFactorAuth pulumi.StringPtrInput
	// Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwish conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
	GetAllTables pulumi.StringPtrInput
	// Forward the same, add, or remove HTTP header. Valid values: `pass`, `add`, `remove`.
	HeaderXForwardedFor pulumi.StringPtrInput
	// Add HSTS includeSubDomains response header. Valid values: `enable`, `disable`.
	HstsIncludeSubdomains pulumi.StringPtrInput
	// Enable to allow HTTP compression over SSL-VPN tunnels. Valid values: `enable`, `disable`.
	HttpCompression pulumi.StringPtrInput
	// Enable/disable SSL-VPN support for HttpOnly cookies. Valid values: `enable`, `disable`.
	HttpOnlyCookie pulumi.StringPtrInput
	// SSL-VPN session is disconnected if an HTTP request body is not received within this time (1 - 60 sec, default = 20).
	HttpRequestBodyTimeout pulumi.IntPtrInput
	// SSL-VPN session is disconnected if an HTTP request header is not received within this time (1 - 60 sec, default = 20).
	HttpRequestHeaderTimeout pulumi.IntPtrInput
	// Enable/disable redirect of port 80 to SSL-VPN port. Valid values: `enable`, `disable`.
	HttpsRedirect pulumi.StringPtrInput
	// SSL VPN disconnects if idle for specified time in seconds.
	IdleTimeout pulumi.IntPtrInput
	// IPv6 DNS server 1.
	Ipv6DnsServer1 pulumi.StringPtrInput
	// IPv6 DNS server 2.
	Ipv6DnsServer2 pulumi.StringPtrInput
	// IPv6 WINS server 1.
	Ipv6WinsServer1 pulumi.StringPtrInput
	// IPv6 WINS server 2.
	Ipv6WinsServer2 pulumi.StringPtrInput
	// SSL VPN maximum login attempt times before block (0 - 10, default = 2, 0 = no limit).
	LoginAttemptLimit pulumi.IntPtrInput
	// Time for which a user is blocked from logging in after too many failed login attempts (0 - 86400 sec, default = 60).
	LoginBlockTime pulumi.IntPtrInput
	// SSLVPN maximum login timeout (10 - 180 sec, default = 30).
	LoginTimeout pulumi.IntPtrInput
	// SSL-VPN access port (1 - 65535).
	Port pulumi.IntPtrInput
	// Enable means that if SSL-VPN connections are allowed on an interface admin GUI connections are blocked on that interface. Valid values: `enable`, `disable`.
	PortPrecedence pulumi.StringPtrInput
	// Enable to require client certificates for all SSL-VPN users. Valid values: `enable`, `disable`.
	Reqclientcert pulumi.StringPtrInput
	// Enable to allow SSL-VPN sessions to bypass routing and bind to the incoming interface. Valid values: `enable`, `disable`.
	RouteSourceInterface pulumi.StringPtrInput
	// SAML local redirect port in the machine running FCT (0 - 65535). 0 is to disable redirection on FGT side.
	SamlRedirectPort pulumi.IntPtrInput
	// Server hostname for HTTPS. When set, will be used for SSL VPN web proxy host header for any redirection.
	ServerHostname pulumi.StringPtrInput
	// Name of the server certificate to be used for SSL-VPNs.
	Servercert pulumi.StringPtrInput
	// Enable/disable negated source IPv6 address match. Valid values: `enable`, `disable`.
	SourceAddress6Negate pulumi.StringPtrInput
	// IPv6 source address of incoming traffic. The structure of `sourceAddress6` block is documented below.
	SourceAddress6s SettingsSourceAddress6ArrayInput
	// Enable/disable negated source address match. Valid values: `enable`, `disable`.
	SourceAddressNegate pulumi.StringPtrInput
	// Source address of incoming traffic. The structure of `sourceAddress` block is documented below.
	SourceAddresses SettingsSourceAddressArrayInput
	// SSL VPN source interface of incoming traffic. The structure of `sourceInterface` block is documented below.
	SourceInterfaces SettingsSourceInterfaceArrayInput
	// Enable to allow client renegotiation by the server if the tunnel goes down. Valid values: `disable`, `enable`.
	SslClientRenegotiation pulumi.StringPtrInput
	// Enable/disable insertion of empty fragment. Valid values: `enable`, `disable`.
	SslInsertEmptyFragment pulumi.StringPtrInput
	// SSL maximum protocol version. Valid values: `tls1-0`, `tls1-1`, `tls1-2`, `tls1-3`.
	SslMaxProtoVer pulumi.StringPtrInput
	// SSL minimum protocol version. Valid values: `tls1-0`, `tls1-1`, `tls1-2`, `tls1-3`.
	SslMinProtoVer pulumi.StringPtrInput
	// Enable/disable SSL-VPN. Valid values: `enable`, `disable`.
	Status pulumi.StringPtrInput
	// Enable/disable TLSv1.0. Valid values: `enable`, `disable`.
	Tlsv10 pulumi.StringPtrInput
	// Enable/disable TLSv1.1. Valid values: `enable`, `disable`.
	Tlsv11 pulumi.StringPtrInput
	// Enable/disable TLSv1.2. Valid values: `enable`, `disable`.
	Tlsv12 pulumi.StringPtrInput
	// Enable/disable TLSv1.3. Valid values: `enable`, `disable`.
	Tlsv13 pulumi.StringPtrInput
	// Transform backward slashes to forward slashes in URLs. Valid values: `enable`, `disable`.
	TransformBackwardSlashes pulumi.StringPtrInput
	// Method used for assigning address for tunnel. Valid values: `first-available`, `round-robin`.
	TunnelAddrAssignedMethod pulumi.StringPtrInput
	// Enable/disable tunnel connection without re-authorization if previous connection dropped. Valid values: `enable`, `disable`.
	TunnelConnectWithoutReauth pulumi.StringPtrInput
	// Names of the IPv4 IP Pool firewall objects that define the IP addresses reserved for remote clients. The structure of `tunnelIpPools` block is documented below.
	TunnelIpPools SettingsTunnelIpPoolArrayInput
	// Names of the IPv6 IP Pool firewall objects that define the IP addresses reserved for remote clients. The structure of `tunnelIpv6Pools` block is documented below.
	TunnelIpv6Pools SettingsTunnelIpv6PoolArrayInput
	// Time out value to clean up user session after tunnel connection is dropped (1 - 255 sec, default=30).
	TunnelUserSessionTimeout pulumi.IntPtrInput
	// Enable/disable unsafe legacy re-negotiation. Valid values: `enable`, `disable`.
	UnsafeLegacyRenegotiation pulumi.StringPtrInput
	// Enable to obscure the host name of the URL of the web browser display. Valid values: `enable`, `disable`.
	UrlObscuration pulumi.StringPtrInput
	// Name of user peer.
	UserPeer pulumi.StringPtrInput
	// Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
	Vdomparam pulumi.StringPtrInput
	// Enable/disable use of IP pools defined in firewall policy while using web-mode. Valid values: `enable`, `disable`.
	WebModeSnat pulumi.StringPtrInput
	// WINS server 1.
	WinsServer1 pulumi.StringPtrInput
	// WINS server 2.
	WinsServer2 pulumi.StringPtrInput
	// Add HTTP X-Content-Type-Options header. Valid values: `enable`, `disable`.
	XContentTypeOptions pulumi.StringPtrInput
	// Enable/disable verification of device certificate for SSLVPN ZTNA session. Valid values: `enable`, `disable`.
	ZtnaTrustedClient pulumi.StringPtrInput
}

func (SettingsState) ElementType 

func (SettingsState) ElementType() reflect.Type

type SettingsTunnelIpPool 

type SettingsTunnelIpPool struct {
	// Address name.
	Name *string `pulumi:"name"`
}

type SettingsTunnelIpPoolArgs 

type SettingsTunnelIpPoolArgs struct {
	// Address name.
	Name pulumi.StringPtrInput `pulumi:"name"`
}

func (SettingsTunnelIpPoolArgs) ElementType 

func (SettingsTunnelIpPoolArgs) ElementType() reflect.Type

func (SettingsTunnelIpPoolArgs) ToSettingsTunnelIpPoolOutput 

func (i SettingsTunnelIpPoolArgs) ToSettingsTunnelIpPoolOutput() SettingsTunnelIpPoolOutput

func (SettingsTunnelIpPoolArgs) ToSettingsTunnelIpPoolOutputWithContext 

func (i SettingsTunnelIpPoolArgs) ToSettingsTunnelIpPoolOutputWithContext(ctx context.Context) SettingsTunnelIpPoolOutput

type SettingsTunnelIpPoolArray 

type SettingsTunnelIpPoolArray []SettingsTunnelIpPoolInput

func (SettingsTunnelIpPoolArray) ElementType 

func (SettingsTunnelIpPoolArray) ElementType() reflect.Type

func (SettingsTunnelIpPoolArray) ToSettingsTunnelIpPoolArrayOutput 

func (i SettingsTunnelIpPoolArray) ToSettingsTunnelIpPoolArrayOutput() SettingsTunnelIpPoolArrayOutput

func (SettingsTunnelIpPoolArray) ToSettingsTunnelIpPoolArrayOutputWithContext 

func (i SettingsTunnelIpPoolArray) ToSettingsTunnelIpPoolArrayOutputWithContext(ctx context.Context) SettingsTunnelIpPoolArrayOutput

type SettingsTunnelIpPoolArrayInput 

type SettingsTunnelIpPoolArrayInput interface {
	pulumi.Input

	ToSettingsTunnelIpPoolArrayOutput() SettingsTunnelIpPoolArrayOutput
	ToSettingsTunnelIpPoolArrayOutputWithContext(context.Context) SettingsTunnelIpPoolArrayOutput
}

SettingsTunnelIpPoolArrayInput is an input type that accepts SettingsTunnelIpPoolArray and SettingsTunnelIpPoolArrayOutput values. You can construct a concrete instance of `SettingsTunnelIpPoolArrayInput` via: 

SettingsTunnelIpPoolArray{ SettingsTunnelIpPoolArgs{...} }

type SettingsTunnelIpPoolArrayOutput 

type SettingsTunnelIpPoolArrayOutput struct{ *pulumi.OutputState }

func (SettingsTunnelIpPoolArrayOutput) ElementType 

func (SettingsTunnelIpPoolArrayOutput) ElementType() reflect.Type

func (SettingsTunnelIpPoolArrayOutput) Index 

func (o SettingsTunnelIpPoolArrayOutput) Index(i pulumi.IntInput) SettingsTunnelIpPoolOutput

func (SettingsTunnelIpPoolArrayOutput) ToSettingsTunnelIpPoolArrayOutput 

func (o SettingsTunnelIpPoolArrayOutput) ToSettingsTunnelIpPoolArrayOutput() SettingsTunnelIpPoolArrayOutput

func (SettingsTunnelIpPoolArrayOutput) ToSettingsTunnelIpPoolArrayOutputWithContext 

func (o SettingsTunnelIpPoolArrayOutput) ToSettingsTunnelIpPoolArrayOutputWithContext(ctx context.Context) SettingsTunnelIpPoolArrayOutput

type SettingsTunnelIpPoolInput 

type SettingsTunnelIpPoolInput interface {
	pulumi.Input

	ToSettingsTunnelIpPoolOutput() SettingsTunnelIpPoolOutput
	ToSettingsTunnelIpPoolOutputWithContext(context.Context) SettingsTunnelIpPoolOutput
}

SettingsTunnelIpPoolInput is an input type that accepts SettingsTunnelIpPoolArgs and SettingsTunnelIpPoolOutput values. You can construct a concrete instance of `SettingsTunnelIpPoolInput` via: 

SettingsTunnelIpPoolArgs{...}

type SettingsTunnelIpPoolOutput 

type SettingsTunnelIpPoolOutput struct{ *pulumi.OutputState }

func (SettingsTunnelIpPoolOutput) ElementType 

func (SettingsTunnelIpPoolOutput) ElementType() reflect.Type

func (SettingsTunnelIpPoolOutput) Name 

func (o SettingsTunnelIpPoolOutput) Name() pulumi.StringPtrOutput

Address name.

func (SettingsTunnelIpPoolOutput) ToSettingsTunnelIpPoolOutput 

func (o SettingsTunnelIpPoolOutput) ToSettingsTunnelIpPoolOutput() SettingsTunnelIpPoolOutput

func (SettingsTunnelIpPoolOutput) ToSettingsTunnelIpPoolOutputWithContext 

func (o SettingsTunnelIpPoolOutput) ToSettingsTunnelIpPoolOutputWithContext(ctx context.Context) SettingsTunnelIpPoolOutput

type SettingsTunnelIpv6Pool 

type SettingsTunnelIpv6Pool struct {
	// Group name.
	Name *string `pulumi:"name"`
}

type SettingsTunnelIpv6PoolArgs 

type SettingsTunnelIpv6PoolArgs struct {
	// Group name.
	Name pulumi.StringPtrInput `pulumi:"name"`
}

func (SettingsTunnelIpv6PoolArgs) ElementType 

func (SettingsTunnelIpv6PoolArgs) ElementType() reflect.Type

func (SettingsTunnelIpv6PoolArgs) ToSettingsTunnelIpv6PoolOutput 

func (i SettingsTunnelIpv6PoolArgs) ToSettingsTunnelIpv6PoolOutput() SettingsTunnelIpv6PoolOutput

func (SettingsTunnelIpv6PoolArgs) ToSettingsTunnelIpv6PoolOutputWithContext 

func (i SettingsTunnelIpv6PoolArgs) ToSettingsTunnelIpv6PoolOutputWithContext(ctx context.Context) SettingsTunnelIpv6PoolOutput

type SettingsTunnelIpv6PoolArray 

type SettingsTunnelIpv6PoolArray []SettingsTunnelIpv6PoolInput

func (SettingsTunnelIpv6PoolArray) ElementType 

func (SettingsTunnelIpv6PoolArray) ElementType() reflect.Type

func (SettingsTunnelIpv6PoolArray) ToSettingsTunnelIpv6PoolArrayOutput 

func (i SettingsTunnelIpv6PoolArray) ToSettingsTunnelIpv6PoolArrayOutput() SettingsTunnelIpv6PoolArrayOutput

func (SettingsTunnelIpv6PoolArray) ToSettingsTunnelIpv6PoolArrayOutputWithContext 

func (i SettingsTunnelIpv6PoolArray) ToSettingsTunnelIpv6PoolArrayOutputWithContext(ctx context.Context) SettingsTunnelIpv6PoolArrayOutput

type SettingsTunnelIpv6PoolArrayInput 

type SettingsTunnelIpv6PoolArrayInput interface {
	pulumi.Input

	ToSettingsTunnelIpv6PoolArrayOutput() SettingsTunnelIpv6PoolArrayOutput
	ToSettingsTunnelIpv6PoolArrayOutputWithContext(context.Context) SettingsTunnelIpv6PoolArrayOutput
}

SettingsTunnelIpv6PoolArrayInput is an input type that accepts SettingsTunnelIpv6PoolArray and SettingsTunnelIpv6PoolArrayOutput values. You can construct a concrete instance of `SettingsTunnelIpv6PoolArrayInput` via: 

SettingsTunnelIpv6PoolArray{ SettingsTunnelIpv6PoolArgs{...} }

type SettingsTunnelIpv6PoolArrayOutput 

type SettingsTunnelIpv6PoolArrayOutput struct{ *pulumi.OutputState }

func (SettingsTunnelIpv6PoolArrayOutput) ElementType 

func (SettingsTunnelIpv6PoolArrayOutput) ElementType() reflect.Type

func (SettingsTunnelIpv6PoolArrayOutput) Index 

func (o SettingsTunnelIpv6PoolArrayOutput) Index(i pulumi.IntInput) SettingsTunnelIpv6PoolOutput

func (SettingsTunnelIpv6PoolArrayOutput) ToSettingsTunnelIpv6PoolArrayOutput 

func (o SettingsTunnelIpv6PoolArrayOutput) ToSettingsTunnelIpv6PoolArrayOutput() SettingsTunnelIpv6PoolArrayOutput

func (SettingsTunnelIpv6PoolArrayOutput) ToSettingsTunnelIpv6PoolArrayOutputWithContext 

func (o SettingsTunnelIpv6PoolArrayOutput) ToSettingsTunnelIpv6PoolArrayOutputWithContext(ctx context.Context) SettingsTunnelIpv6PoolArrayOutput

type SettingsTunnelIpv6PoolInput 

type SettingsTunnelIpv6PoolInput interface {
	pulumi.Input

	ToSettingsTunnelIpv6PoolOutput() SettingsTunnelIpv6PoolOutput
	ToSettingsTunnelIpv6PoolOutputWithContext(context.Context) SettingsTunnelIpv6PoolOutput
}

SettingsTunnelIpv6PoolInput is an input type that accepts SettingsTunnelIpv6PoolArgs and SettingsTunnelIpv6PoolOutput values. You can construct a concrete instance of `SettingsTunnelIpv6PoolInput` via: 

SettingsTunnelIpv6PoolArgs{...}

type SettingsTunnelIpv6PoolOutput 

type SettingsTunnelIpv6PoolOutput struct{ *pulumi.OutputState }

func (SettingsTunnelIpv6PoolOutput) ElementType 

func (SettingsTunnelIpv6PoolOutput) ElementType() reflect.Type

func (SettingsTunnelIpv6PoolOutput) Name 

func (o SettingsTunnelIpv6PoolOutput) Name() pulumi.StringPtrOutput

Group name.

func (SettingsTunnelIpv6PoolOutput) ToSettingsTunnelIpv6PoolOutput 

func (o SettingsTunnelIpv6PoolOutput) ToSettingsTunnelIpv6PoolOutput() SettingsTunnelIpv6PoolOutput

func (SettingsTunnelIpv6PoolOutput) ToSettingsTunnelIpv6PoolOutputWithContext 

func (o SettingsTunnelIpv6PoolOutput) ToSettingsTunnelIpv6PoolOutputWithContext(ctx context.Context) SettingsTunnelIpv6PoolOutput

Source Files

View all Source files

Directories

Path Synopsis

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.