structs

package
v0.5.1-rc2 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Dec 10, 2016 License: MPL-2.0 Imports: 32 Imported by: 0

Documentation

Index

Constants

View Source
const (
	// MinDynamicPort is the smallest dynamic port generated
	MinDynamicPort = 20000

	// MaxDynamicPort is the largest dynamic port generated
	MaxDynamicPort = 60000
)
View Source
const (
	// IgnoreUnknownTypeFlag is set along with a MessageType
	// to indicate that the message type can be safely ignored
	// if it is not recognized. This is for future proofing, so
	// that new commands can be added in a way that won't cause
	// old servers to crash when the FSM attempts to process them.
	IgnoreUnknownTypeFlag MessageType = 128

	// ApiMajorVersion is returned as part of the Status.Version request.
	// It should be incremented anytime the APIs are changed in a way
	// that would break clients for sane client versioning.
	ApiMajorVersion = 1

	// ApiMinorVersion is returned as part of the Status.Version request.
	// It should be incremented anytime the APIs are changed to allow
	// for sane client versioning. Minor changes should be compatible
	// within the major version.
	ApiMinorVersion = 1

	ProtocolVersion = "protocol"
	APIMajorVersion = "api.major"
	APIMinorVersion = "api.minor"
)
View Source
const (
	NodeStatusInit  = "initializing"
	NodeStatusReady = "ready"
	NodeStatusDown  = "down"
)
View Source
const (
	// JobTypeNomad is reserved for internal system tasks and is
	// always handled by the CoreScheduler.
	JobTypeCore    = "_core"
	JobTypeService = "service"
	JobTypeBatch   = "batch"
	JobTypeSystem  = "system"
)
View Source
const (
	JobStatusPending = "pending" // Pending means the job is waiting on scheduling
	JobStatusRunning = "running" // Running means the job has non-terminal allocations
	JobStatusDead    = "dead"    // Dead means all evaluation's and allocations are terminal
)
View Source
const (
	// JobMinPriority is the minimum allowed priority
	JobMinPriority = 1

	// JobDefaultPriority is the default priority if not
	// not specified.
	JobDefaultPriority = 50

	// JobMaxPriority is the maximum allowed priority
	JobMaxPriority = 100

	// Ensure CoreJobPriority is higher than any user
	// specified job so that it gets priority. This is important
	// for the system to remain healthy.
	CoreJobPriority = JobMaxPriority * 2
)
View Source
const (
	// PeriodicSpecCron is used for a cron spec.
	PeriodicSpecCron = "cron"

	// PeriodicSpecTest is only used by unit tests. It is a sorted, comma
	// separated list of unix timestamps at which to launch.
	PeriodicSpecTest = "_internal_test"
)
View Source
const (
	// RestartPolicyModeDelay causes an artificial delay till the next interval is
	// reached when the specified attempts have been reached in the interval.
	RestartPolicyModeDelay = "delay"

	// RestartPolicyModeFail causes a job to fail if the specified number of
	// attempts are reached within an interval.
	RestartPolicyModeFail = "fail"
)
View Source
const (
	// TODO add Consul TTL check
	ServiceCheckHTTP   = "http"
	ServiceCheckTCP    = "tcp"
	ServiceCheckScript = "script"
)
View Source
const (
	// TemplateChangeModeNoop marks that no action should be taken if the
	// template is re-rendered
	TemplateChangeModeNoop = "noop"

	// TemplateChangeModeSignal marks that the task should be signaled if the
	// template is re-rendered
	TemplateChangeModeSignal = "signal"

	// TemplateChangeModeRestart marks that the task should be restarted if the
	// template is re-rendered
	TemplateChangeModeRestart = "restart"
)
View Source
const (
	TaskStatePending = "pending" // The task is waiting to be run.
	TaskStateRunning = "running" // The task is currently running.
	TaskStateDead    = "dead"    // Terminal state of task.
)

Set of possible states for a task.

View Source
const (
	// TaskSetupFailure indicates that the task could not be started due to a
	// a setup failure.
	TaskSetupFailure = "Setup Failure"

	// TaskDriveFailure indicates that the task could not be started due to a
	// failure in the driver.
	TaskDriverFailure = "Driver Failure"

	// TaskReceived signals that the task has been pulled by the client at the
	// given timestamp.
	TaskReceived = "Received"

	// TaskFailedValidation indicates the task was invalid and as such was not
	// run.
	TaskFailedValidation = "Failed Validation"

	// TaskStarted signals that the task was started and its timestamp can be
	// used to determine the running length of the task.
	TaskStarted = "Started"

	// TaskTerminated indicates that the task was started and exited.
	TaskTerminated = "Terminated"

	// TaskKilling indicates a kill signal has been sent to the task.
	TaskKilling = "Killing"

	// TaskKilled indicates a user has killed the task.
	TaskKilled = "Killed"

	// TaskRestarting indicates that task terminated and is being restarted.
	TaskRestarting = "Restarting"

	// TaskNotRestarting indicates that the task has failed and is not being
	// restarted because it has exceeded its restart policy.
	TaskNotRestarting = "Not Restarting"

	// TaskRestartSignal indicates that the task has been signalled to be
	// restarted
	TaskRestartSignal = "Restart Signaled"

	// TaskSignaling indicates that the task is being signalled.
	TaskSignaling = "Signaling"

	// TaskDownloadingArtifacts means the task is downloading the artifacts
	// specified in the task.
	TaskDownloadingArtifacts = "Downloading Artifacts"

	// TaskArtifactDownloadFailed indicates that downloading the artifacts
	// failed.
	TaskArtifactDownloadFailed = "Failed Artifact Download"

	// TaskDiskExceeded indicates that one of the tasks in a taskgroup has
	// exceeded the requested disk resources.
	TaskDiskExceeded = "Disk Resources Exceeded"

	// TaskSiblingFailed indicates that a sibling task in the task group has
	// failed.
	TaskSiblingFailed = "Sibling task failed"
)
View Source
const (
	ConstraintDistinctHosts = "distinct_hosts"
	ConstraintRegex         = "regexp"
	ConstraintVersion       = "version"
	ConstraintSetContains   = "set_contains"
)
View Source
const (
	// VaultChangeModeNoop takes no action when a new token is retrieved.
	VaultChangeModeNoop = "noop"

	// VaultChangeModeSignal signals the task when a new token is retrieved.
	VaultChangeModeSignal = "signal"

	// VaultChangeModeRestart restarts the task when a new token is retrieved.
	VaultChangeModeRestart = "restart"
)
View Source
const (
	AllocDesiredStatusRun   = "run"   // Allocation should run
	AllocDesiredStatusStop  = "stop"  // Allocation should stop
	AllocDesiredStatusEvict = "evict" // Allocation should stop, and was evicted
)
View Source
const (
	AllocClientStatusPending  = "pending"
	AllocClientStatusRunning  = "running"
	AllocClientStatusComplete = "complete"
	AllocClientStatusFailed   = "failed"
	AllocClientStatusLost     = "lost"
)
View Source
const (
	EvalStatusBlocked   = "blocked"
	EvalStatusPending   = "pending"
	EvalStatusComplete  = "complete"
	EvalStatusFailed    = "failed"
	EvalStatusCancelled = "canceled"
)
View Source
const (
	EvalTriggerJobRegister   = "job-register"
	EvalTriggerJobDeregister = "job-deregister"
	EvalTriggerPeriodicJob   = "periodic-job"
	EvalTriggerNodeUpdate    = "node-update"
	EvalTriggerScheduled     = "scheduled"
	EvalTriggerRollingUpdate = "rolling-update"
	EvalTriggerMaxPlans      = "max-plan-attempts"
)
View Source
const (
	// CoreJobEvalGC is used for the garbage collection of evaluations
	// and allocations. We periodically scan evaluations in a terminal state,
	// in which all the corresponding allocations are also terminal. We
	// delete these out of the system to bound the state.
	CoreJobEvalGC = "eval-gc"

	// CoreJobNodeGC is used for the garbage collection of failed nodes.
	// We periodically scan nodes in a terminal state, and if they have no
	// corresponding allocations we delete these out of the system.
	CoreJobNodeGC = "node-gc"

	// CoreJobJobGC is used for the garbage collection of eligible jobs. We
	// periodically scan garbage collectible jobs and check if both their
	// evaluations and allocations are terminal. If so, we delete these out of
	// the system.
	CoreJobJobGC = "job-gc"

	// CoreJobForceGC is used to force garbage collection of all GCable objects.
	CoreJobForceGC = "force-gc"
)
View Source
const (
	BytesInMegabyte = 1024 * 1024
)
View Source
const (
	// DefaultKillTimeout is the default timeout between signaling a task it
	// will be killed and killing it.
	DefaultKillTimeout = 5 * time.Second
)
View Source
const (
	// NodeUniqueNamespace is a prefix that can be appended to node meta or
	// attribute keys to mark them for exclusion in computed node class.
	NodeUniqueNamespace = "unique."
)
View Source
const (
	// PeriodicLaunchSuffix is the string appended to the periodic jobs ID
	// when launching derived instances of it.
	PeriodicLaunchSuffix = "/periodic-"
)

Variables

View Source
var (
	ErrNoLeader     = fmt.Errorf("No cluster leader")
	ErrNoRegionPath = fmt.Errorf("No path to region")
)
View Source
var (
	// AllocationIndexRegex is a regular expression to find the allocation index.
	AllocationIndexRegex = regexp.MustCompile(".+\\[(\\d+)\\]$")
)
View Source
var HashiMsgpackHandle = func() *hcodec.MsgpackHandle {
	h := &hcodec.MsgpackHandle{RawToString: true}

	h.MapType = reflect.TypeOf(map[string]interface{}(nil))
	return h
}()
View Source
var MsgpackHandle = func() *codec.MsgpackHandle {
	h := &codec.MsgpackHandle{RawToString: true}

	h.MapType = reflect.TypeOf(map[string]interface{}(nil))
	return h
}()

msgpackHandle is a shared handle for encoding/decoding of structs

View Source
var (
	// TemplateChangeModeInvalidError is the error for when an invalid change
	// mode is given
	TemplateChangeModeInvalidError = errors.New("Invalid change mode. Must be one of the following: noop, signal, restart")
)

Functions

func CopyMapStringFloat64 added in v0.3.0

func CopyMapStringFloat64(m map[string]float64) map[string]float64

func CopyMapStringInt added in v0.3.0

func CopyMapStringInt(m map[string]int) map[string]int

func CopyMapStringString added in v0.3.0

func CopyMapStringString(m map[string]string) map[string]string

Helpers for copying generic structures.

func CopySliceInt added in v0.5.0

func CopySliceInt(s []int) []int

func CopySliceString added in v0.3.0

func CopySliceString(s []string) []string

func Decode

func Decode(buf []byte, out interface{}) error

Decode is used to decode a MsgPack encoded object

func Encode

func Encode(t MessageType, msg interface{}) ([]byte, error)

Encode is used to encode a MsgPack object with type prefix

func GenerateUUID

func GenerateUUID() string

GenerateUUID is used to generate a random UUID

func IsUniqueNamespace added in v0.3.0

func IsUniqueNamespace(key string) bool

IsUniqueNamespace returns whether the key is under the unique namespace.

func MapStringStringSliceValueSet added in v0.5.0

func MapStringStringSliceValueSet(m map[string][]string) []string

MapStringStringSliceValueSet returns the set of values in a map[string][]string

func PathEscapesAllocDir added in v0.5.0

func PathEscapesAllocDir(path string) (bool, error)

PathEscapesAllocDir returns if the given path escapes the allocation directory

func ScoreFit

func ScoreFit(node *Node, util *Resources) float64

ScoreFit is used to score the fit based on the Google work published here: http://www.columbia.edu/~cs2035/courses/ieor4405.S13/datacenter_scheduling.ppt This is equivalent to their BestFit v3

func ShouldDrainNode

func ShouldDrainNode(status string) bool

ShouldDrainNode checks if a given node status should trigger an evaluation. Some states don't require any further action.

func SliceStringIsSubset added in v0.5.0

func SliceStringIsSubset(larger, smaller []string) (bool, []string)

SliceStringIsSubset returns whether the smaller set of strings is a subset of the larger. If the smaller slice is not a subset, the offending elements are returned.

func UniqueNamespace added in v0.3.0

func UniqueNamespace(key string) string

UniqueNamespace takes a key and returns the key marked under the unique namespace.

func ValidNodeStatus

func ValidNodeStatus(status string) bool

ValidNodeStatus is used to check if a node status is valid

func VaultPoliciesSet added in v0.5.0

func VaultPoliciesSet(policies map[string]map[string]*Vault) []string

VaultPoliciesSet takes the structure returned by VaultPolicies and returns the set of required policies

Types

type AllocListRequest

type AllocListRequest struct {
	QueryOptions
}

AllocListRequest is used to request a list of allocations

type AllocListResponse

type AllocListResponse struct {
	Allocations []*AllocListStub
	QueryMeta
}

AllocListResponse is used for a list request

type AllocListStub

type AllocListStub struct {
	ID                 string
	EvalID             string
	Name               string
	NodeID             string
	JobID              string
	TaskGroup          string
	DesiredStatus      string
	DesiredDescription string
	ClientStatus       string
	ClientDescription  string
	TaskStates         map[string]*TaskState
	CreateIndex        uint64
	ModifyIndex        uint64
	CreateTime         int64
}

AllocListStub is used to return a subset of alloc information

type AllocMetric

type AllocMetric struct {
	// NodesEvaluated is the number of nodes that were evaluated
	NodesEvaluated int

	// NodesFiltered is the number of nodes filtered due to a constraint
	NodesFiltered int

	// NodesAvailable is the number of nodes available for evaluation per DC.
	NodesAvailable map[string]int

	// ClassFiltered is the number of nodes filtered by class
	ClassFiltered map[string]int

	// ConstraintFiltered is the number of failures caused by constraint
	ConstraintFiltered map[string]int

	// NodesExhausted is the number of nodes skipped due to being
	// exhausted of at least one resource
	NodesExhausted int

	// ClassExhausted is the number of nodes exhausted by class
	ClassExhausted map[string]int

	// DimensionExhausted provides the count by dimension or reason
	DimensionExhausted map[string]int

	// Scores is the scores of the final few nodes remaining
	// for placement. The top score is typically selected.
	Scores map[string]float64

	// AllocationTime is a measure of how long the allocation
	// attempt took. This can affect performance and SLAs.
	AllocationTime time.Duration

	// CoalescedFailures indicates the number of other
	// allocations that were coalesced into this failed allocation.
	// This is to prevent creating many failed allocations for a
	// single task group.
	CoalescedFailures int
}

AllocMetric is used to track various metrics while attempting to make an allocation. These are used to debug a job, or to better understand the pressure within the system.

func (*AllocMetric) Copy added in v0.3.0

func (a *AllocMetric) Copy() *AllocMetric

func (*AllocMetric) EvaluateNode

func (a *AllocMetric) EvaluateNode()

func (*AllocMetric) ExhaustedNode

func (a *AllocMetric) ExhaustedNode(node *Node, dimension string)

func (*AllocMetric) FilterNode

func (a *AllocMetric) FilterNode(node *Node, constraint string)

func (*AllocMetric) ScoreNode

func (a *AllocMetric) ScoreNode(node *Node, name string, score float64)

type AllocSpecificRequest

type AllocSpecificRequest struct {
	AllocID string
	QueryOptions
}

AllocSpecificRequest is used to query a specific allocation

type AllocUpdateRequest

type AllocUpdateRequest struct {
	// Alloc is the list of new allocations to assign
	Alloc []*Allocation

	// Job is the shared parent job of the allocations.
	// It is pulled out since it is common to reduce payload size.
	Job *Job

	WriteRequest
}

AllocUpdateRequest is used to submit changes to allocations, either to cause evictions or to assign new allocaitons. Both can be done within a single transaction

type Allocation

type Allocation struct {
	// ID of the allocation (UUID)
	ID string

	// ID of the evaluation that generated this allocation
	EvalID string

	// Name is a logical name of the allocation.
	Name string

	// NodeID is the node this is being placed on
	NodeID string

	// Job is the parent job of the task group being allocated.
	// This is copied at allocation time to avoid issues if the job
	// definition is updated.
	JobID string
	Job   *Job

	// TaskGroup is the name of the task group that should be run
	TaskGroup string

	// Resources is the total set of resources allocated as part
	// of this allocation of the task group.
	Resources *Resources

	// SharedResources are the resources that are shared by all the tasks in an
	// allocation
	SharedResources *Resources

	// TaskResources is the set of resources allocated to each
	// task. These should sum to the total Resources.
	TaskResources map[string]*Resources

	// Metrics associated with this allocation
	Metrics *AllocMetric

	// Desired Status of the allocation on the client
	DesiredStatus string

	// DesiredStatusDescription is meant to provide more human useful information
	DesiredDescription string

	// Status of the allocation on the client
	ClientStatus string

	// ClientStatusDescription is meant to provide more human useful information
	ClientDescription string

	// TaskStates stores the state of each task,
	TaskStates map[string]*TaskState

	// PreviousAllocation is the allocation that this allocation is replacing
	PreviousAllocation string

	// Raft Indexes
	CreateIndex uint64
	ModifyIndex uint64

	// AllocModifyIndex is not updated when the client updates allocations. This
	// lets the client pull only the allocs updated by the server.
	AllocModifyIndex uint64

	// CreateTime is the time the allocation has finished scheduling and been
	// verified by the plan applier.
	CreateTime int64
}

Allocation is used to allocate the placement of a task group to a node.

func FilterTerminalAllocs

func FilterTerminalAllocs(allocs []*Allocation) ([]*Allocation, map[string]*Allocation)

FilterTerminalAllocs filters out all allocations in a terminal state and returns the latest terminal allocations

func RemoveAllocs

func RemoveAllocs(alloc []*Allocation, remove []*Allocation) []*Allocation

RemoveAllocs is used to remove any allocs with the given IDs from the list of allocations

func (*Allocation) Copy added in v0.3.0

func (a *Allocation) Copy() *Allocation

func (*Allocation) Index added in v0.3.1

func (a *Allocation) Index() int

Index returns the index of the allocation. If the allocation is from a task group with count greater than 1, there will be multiple allocations for it.

func (*Allocation) RanSuccessfully added in v0.4.0

func (a *Allocation) RanSuccessfully() bool

RanSuccessfully returns whether the client has ran the allocation and all tasks finished successfully

func (*Allocation) ShouldMigrate added in v0.5.0

func (a *Allocation) ShouldMigrate() bool

ShouldMigrate returns if the allocation needs data migration

func (*Allocation) Stub

func (a *Allocation) Stub() *AllocListStub

Stub returns a list stub for the allocation

func (*Allocation) TerminalStatus

func (a *Allocation) TerminalStatus() bool

TerminalStatus returns if the desired or actual status is terminal and will no longer transition.

func (*Allocation) Terminated added in v0.5.0

func (a *Allocation) Terminated() bool

Terminated returns if the allocation is in a terminal state on a client.

type AllocsGetRequest added in v0.3.0

type AllocsGetRequest struct {
	AllocIDs []string
	QueryOptions
}

AllocsGetRequest is used to query a set of allocations

type AllocsGetResponse added in v0.3.0

type AllocsGetResponse struct {
	Allocs []*Allocation
	QueryMeta
}

AllocsGetResponse is used to return a set of allocations

type Bitmap added in v0.3.0

type Bitmap []byte

Bitmap is a simple uncompressed bitmap

func NewBitmap added in v0.3.0

func NewBitmap(size uint) (Bitmap, error)

NewBitmap returns a bitmap with up to size indexes

func (Bitmap) Check added in v0.3.0

func (b Bitmap) Check(idx uint) bool

Check is used to check the given index of the bitmap

func (Bitmap) Clear added in v0.3.0

func (b Bitmap) Clear()

Clear is used to efficiently clear the bitmap

func (Bitmap) Copy added in v0.4.1

func (b Bitmap) Copy() (Bitmap, error)

Copy returns a copy of the Bitmap

func (Bitmap) IndexesInRange added in v0.4.1

func (b Bitmap) IndexesInRange(set bool, from, to uint) []int

IndexesInRange returns the indexes in which the values are either set or unset based on the passed parameter in the passed range

func (Bitmap) Set added in v0.3.0

func (b Bitmap) Set(idx uint)

Set is used to set the given index of the bitmap

func (Bitmap) Size added in v0.4.1

func (b Bitmap) Size() uint

Size returns the size of the bitmap

type Constraint

type Constraint struct {
	LTarget string // Left-hand target
	RTarget string // Right-hand target
	Operand string // Constraint operand (<=, <, =, !=, >, >=), contains, near
	// contains filtered or unexported fields
}

Constraints are used to restrict placement options.

func CopySliceConstraints added in v0.3.0

func CopySliceConstraints(s []*Constraint) []*Constraint

func EscapedConstraints added in v0.3.0

func EscapedConstraints(constraints []*Constraint) []*Constraint

EscapedConstraints takes a set of constraints and returns the set that escapes computed node classes.

func (*Constraint) Copy added in v0.3.0

func (c *Constraint) Copy() *Constraint

func (*Constraint) Equal added in v0.5.0

func (c *Constraint) Equal(o *Constraint) bool

Equal checks if two constraints are equal

func (*Constraint) String

func (c *Constraint) String() string

func (*Constraint) Validate added in v0.2.0

func (c *Constraint) Validate() error

type DeriveVaultTokenRequest added in v0.5.0

type DeriveVaultTokenRequest struct {
	NodeID   string
	SecretID string
	AllocID  string
	Tasks    []string
	QueryOptions
}

DeriveVaultTokenRequest is used to request wrapped Vault tokens for the following tasks in the given allocation

type DeriveVaultTokenResponse added in v0.5.0

type DeriveVaultTokenResponse struct {
	// Tasks is a mapping between the task name and the wrapped token
	Tasks map[string]string

	// Error stores any error that occured. Errors are stored here so we can
	// communicate whether it is retriable
	Error *RecoverableError

	QueryMeta
}

DeriveVaultTokenResponse returns the wrapped tokens for each requested task

type DesiredUpdates added in v0.4.0

type DesiredUpdates struct {
	Ignore            uint64
	Place             uint64
	Migrate           uint64
	Stop              uint64
	InPlaceUpdate     uint64
	DestructiveUpdate uint64
}

DesiredUpdates is the set of changes the scheduler would like to make given sufficient resources and cluster capacity.

type DiffType added in v0.4.0

type DiffType string

DiffType denotes the type of a diff object.

var (
	DiffTypeNone    DiffType = "None"
	DiffTypeAdded   DiffType = "Added"
	DiffTypeDeleted DiffType = "Deleted"
	DiffTypeEdited  DiffType = "Edited"
)

func (DiffType) Less added in v0.4.0

func (d DiffType) Less(other DiffType) bool

type EphemeralDisk added in v0.5.0

type EphemeralDisk struct {
	// Sticky indicates whether the allocation is sticky to a node
	Sticky bool

	// SizeMB is the size of the local disk
	SizeMB int `mapstructure:"size"`

	// Migrate determines if Nomad client should migrate the allocation dir for
	// sticky allocations
	Migrate bool
}

EphemeralDisk is an ephemeral disk object

func DefaultEphemeralDisk added in v0.5.0

func DefaultEphemeralDisk() *EphemeralDisk

DefaultEphemeralDisk returns a EphemeralDisk with default configurations

func (*EphemeralDisk) Copy added in v0.5.0

func (d *EphemeralDisk) Copy() *EphemeralDisk

Copy copies the EphemeralDisk struct and returns a new one

func (*EphemeralDisk) Validate added in v0.5.0

func (d *EphemeralDisk) Validate() error

Validate validates EphemeralDisk

type EvalAckRequest

type EvalAckRequest struct {
	EvalID string
	Token  string
	WriteRequest
}

EvalAckRequest is used to Ack/Nack a specific evaluation

type EvalAllocationsResponse

type EvalAllocationsResponse struct {
	Allocations []*AllocListStub
	QueryMeta
}

EvalAllocationsResponse is used to return the allocations for an evaluation

type EvalDeleteRequest

type EvalDeleteRequest struct {
	Evals  []string
	Allocs []string
	WriteRequest
}

EvalDeleteRequest is used for deleting an evaluation.

type EvalDequeueRequest

type EvalDequeueRequest struct {
	Schedulers       []string
	Timeout          time.Duration
	SchedulerVersion uint16
	WriteRequest
}

EvalDequeueRequest is used when we want to dequeue an evaluation

type EvalDequeueResponse

type EvalDequeueResponse struct {
	Eval  *Evaluation
	Token string
	QueryMeta
}

EvalDequeueResponse is used to return from a dequeue

type EvalListRequest

type EvalListRequest struct {
	QueryOptions
}

EvalListRequest is used to list the evaluations

type EvalListResponse

type EvalListResponse struct {
	Evaluations []*Evaluation
	QueryMeta
}

EvalListResponse is used for a list request

type EvalSpecificRequest

type EvalSpecificRequest struct {
	EvalID string
	QueryOptions
}

EvalSpecificRequest is used when we just need to specify a target evaluation

type EvalUpdateRequest

type EvalUpdateRequest struct {
	Evals     []*Evaluation
	EvalToken string
	WriteRequest
}

EvalUpdateRequest is used for upserting evaluations.

type Evaluation

type Evaluation struct {
	// ID is a randonly generated UUID used for this evaluation. This
	// is assigned upon the creation of the evaluation.
	ID string

	// Priority is used to control scheduling importance and if this job
	// can preempt other jobs.
	Priority int

	// Type is used to control which schedulers are available to handle
	// this evaluation.
	Type string

	// TriggeredBy is used to give some insight into why this Eval
	// was created. (Job change, node failure, alloc failure, etc).
	TriggeredBy string

	// JobID is the job this evaluation is scoped to. Evaluations cannot
	// be run in parallel for a given JobID, so we serialize on this.
	JobID string

	// JobModifyIndex is the modify index of the job at the time
	// the evaluation was created
	JobModifyIndex uint64

	// NodeID is the node that was affected triggering the evaluation.
	NodeID string

	// NodeModifyIndex is the modify index of the node at the time
	// the evaluation was created
	NodeModifyIndex uint64

	// Status of the evaluation
	Status string

	// StatusDescription is meant to provide more human useful information
	StatusDescription string

	// Wait is a minimum wait time for running the eval. This is used to
	// support a rolling upgrade.
	Wait time.Duration

	// NextEval is the evaluation ID for the eval created to do a followup.
	// This is used to support rolling upgrades, where we need a chain of evaluations.
	NextEval string

	// PreviousEval is the evaluation ID for the eval creating this one to do a followup.
	// This is used to support rolling upgrades, where we need a chain of evaluations.
	PreviousEval string

	// BlockedEval is the evaluation ID for a created blocked eval. A
	// blocked eval will be created if all allocations could not be placed due
	// to constraints or lacking resources.
	BlockedEval string

	// FailedTGAllocs are task groups which have allocations that could not be
	// made, but the metrics are persisted so that the user can use the feedback
	// to determine the cause.
	FailedTGAllocs map[string]*AllocMetric

	// ClassEligibility tracks computed node classes that have been explicitly
	// marked as eligible or ineligible.
	ClassEligibility map[string]bool

	// EscapedComputedClass marks whether the job has constraints that are not
	// captured by computed node classes.
	EscapedComputedClass bool

	// AnnotatePlan triggers the scheduler to provide additional annotations
	// during the evaluation. This should not be set during normal operations.
	AnnotatePlan bool

	// SnapshotIndex is the Raft index of the snapshot used to process the
	// evaluation. As such it will only be set once it has gone through the
	// scheduler.
	SnapshotIndex uint64

	// QueuedAllocations is the number of unplaced allocations at the time the
	// evaluation was processed. The map is keyed by Task Group names.
	QueuedAllocations map[string]int

	// Raft Indexes
	CreateIndex uint64
	ModifyIndex uint64
}

Evaluation is used anytime we need to apply business logic as a result of a change to our desired state (job specification) or the emergent state (registered nodes). When the inputs change, we need to "evaluate" them, potentially taking action (allocation of work) or doing nothing if the state of the world does not require it.

func (*Evaluation) Copy

func (e *Evaluation) Copy() *Evaluation

func (*Evaluation) CreateBlockedEval added in v0.4.0

func (e *Evaluation) CreateBlockedEval(classEligibility map[string]bool, escaped bool) *Evaluation

CreateBlockedEval creates a blocked evaluation to followup this eval to place any failed allocations. It takes the classes marked explicitly eligible or ineligible and whether the job has escaped computed node classes.

func (*Evaluation) GoString

func (e *Evaluation) GoString() string

func (*Evaluation) MakePlan

func (e *Evaluation) MakePlan(j *Job) *Plan

MakePlan is used to make a plan from the given evaluation for a given Job

func (*Evaluation) NextRollingEval

func (e *Evaluation) NextRollingEval(wait time.Duration) *Evaluation

NextRollingEval creates an evaluation to followup this eval for rolling updates

func (*Evaluation) ShouldBlock added in v0.3.0

func (e *Evaluation) ShouldBlock() bool

ShouldBlock checks if a given evaluation should be entered into the blocked eval tracker.

func (*Evaluation) ShouldEnqueue

func (e *Evaluation) ShouldEnqueue() bool

ShouldEnqueue checks if a given evaluation should be enqueued into the eval_broker

func (*Evaluation) TerminalStatus

func (e *Evaluation) TerminalStatus() bool

TerminalStatus returns if the current status is terminal and will no longer transition.

type FieldDiff added in v0.4.0

type FieldDiff struct {
	Type        DiffType
	Name        string
	Old, New    string
	Annotations []string
}

func (*FieldDiff) GoString added in v0.4.0

func (f *FieldDiff) GoString() string

func (*FieldDiff) Less added in v0.4.0

func (f *FieldDiff) Less(other *FieldDiff) bool

type FieldDiffs added in v0.4.0

type FieldDiffs []*FieldDiff

For sorting FieldDiffs

func (FieldDiffs) Len added in v0.4.0

func (f FieldDiffs) Len() int

func (FieldDiffs) Less added in v0.4.0

func (f FieldDiffs) Less(i, j int) bool

func (FieldDiffs) Swap added in v0.4.0

func (f FieldDiffs) Swap(i, j int)

type GenericRequest

type GenericRequest struct {
	QueryOptions
}

GenericRequest is used to request where no specific information is needed.

type GenericResponse

type GenericResponse struct {
	WriteMeta
}

GenericResponse is used to respond to a request where no specific response information is needed.

type Job

type Job struct {
	// Region is the Nomad region that handles scheduling this job
	Region string

	// ID is a unique identifier for the job per region. It can be
	// specified hierarchically like LineOfBiz/OrgName/Team/Project
	ID string

	// ParentID is the unique identifier of the job that spawned this job.
	ParentID string

	// Name is the logical name of the job used to refer to it. This is unique
	// per region, but not unique globally.
	Name string

	// Type is used to control various behaviors about the job. Most jobs
	// are service jobs, meaning they are expected to be long lived.
	// Some jobs are batch oriented meaning they run and then terminate.
	// This can be extended in the future to support custom schedulers.
	Type string

	// Priority is used to control scheduling importance and if this job
	// can preempt other jobs.
	Priority int

	// AllAtOnce is used to control if incremental scheduling of task groups
	// is allowed or if we must do a gang scheduling of the entire job. This
	// can slow down larger jobs if resources are not available.
	AllAtOnce bool `mapstructure:"all_at_once"`

	// Datacenters contains all the datacenters this job is allowed to span
	Datacenters []string

	// Constraints can be specified at a job level and apply to
	// all the task groups and tasks.
	Constraints []*Constraint

	// TaskGroups are the collections of task groups that this job needs
	// to run. Each task group is an atomic unit of scheduling and placement.
	TaskGroups []*TaskGroup

	// Update is used to control the update strategy
	Update UpdateStrategy

	// Periodic is used to define the interval the job is run at.
	Periodic *PeriodicConfig

	// Meta is used to associate arbitrary metadata with this
	// job. This is opaque to Nomad.
	Meta map[string]string

	// VaultToken is the Vault token that proves the submitter of the job has
	// access to the specified Vault policies. This field is only used to
	// transfer the token and is not stored after Job submission.
	VaultToken string `mapstructure:"vault_token"`

	// Job status
	Status string

	// StatusDescription is meant to provide more human useful information
	StatusDescription string

	// Raft Indexes
	CreateIndex    uint64
	ModifyIndex    uint64
	JobModifyIndex uint64
}

Job is the scope of a scheduling request to Nomad. It is the largest scoped object, and is a named collection of task groups. Each task group is further composed of tasks. A task group (TG) is the unit of scheduling however.

func (*Job) Canonicalize added in v0.4.1

func (j *Job) Canonicalize()

Canonicalize is used to canonicalize fields in the Job. This should be called when registering a Job.

func (*Job) Copy added in v0.3.0

func (j *Job) Copy() *Job

Copy returns a deep copy of the Job. It is expected that callers use recover. This job can panic if the deep copy failed as it uses reflection.

func (*Job) Diff added in v0.4.0

func (j *Job) Diff(other *Job, contextual bool) (*JobDiff, error)

Diff returns a diff of two jobs and a potential error if the Jobs are not diffable. If contextual diff is enabled, objects within the job will contain field information even if unchanged.

func (*Job) IsPeriodic added in v0.2.2

func (j *Job) IsPeriodic() bool

IsPeriodic returns whether a job is periodic.

func (*Job) LookupTaskGroup

func (j *Job) LookupTaskGroup(name string) *TaskGroup

LookupTaskGroup finds a task group by name

func (*Job) RequiredSignals added in v0.5.0

func (j *Job) RequiredSignals() map[string]map[string][]string

RequiredSignals returns a mapping of task groups to tasks to their required set of signals

func (*Job) Stub

func (j *Job) Stub(summary *JobSummary) *JobListStub

Stub is used to return a summary of the job

func (*Job) Validate

func (j *Job) Validate() error

Validate is used to sanity check a job input

func (*Job) VaultPolicies added in v0.5.0

func (j *Job) VaultPolicies() map[string]map[string]*Vault

VaultPolicies returns the set of Vault policies per task group, per task

type JobAllocationsResponse

type JobAllocationsResponse struct {
	Allocations []*AllocListStub
	QueryMeta
}

JobAllocationsResponse is used to return the allocations for a job

type JobDeregisterRequest

type JobDeregisterRequest struct {
	JobID string
	WriteRequest
}

JobDeregisterRequest is used for Job.Deregister endpoint to deregister a job as being a schedulable entity.

type JobDeregisterResponse

type JobDeregisterResponse struct {
	EvalID          string
	EvalCreateIndex uint64
	JobModifyIndex  uint64
	QueryMeta
}

JobDeregisterResponse is used to respond to a job deregistration

type JobDiff added in v0.4.0

type JobDiff struct {
	Type       DiffType
	ID         string
	Fields     []*FieldDiff
	Objects    []*ObjectDiff
	TaskGroups []*TaskGroupDiff
}

JobDiff contains the diff of two jobs.

func (*JobDiff) GoString added in v0.4.0

func (j *JobDiff) GoString() string

type JobEvaluateRequest

type JobEvaluateRequest struct {
	JobID string
	WriteRequest
}

JobEvaluateRequest is used when we just need to re-evaluate a target job

type JobEvaluationsResponse

type JobEvaluationsResponse struct {
	Evaluations []*Evaluation
	QueryMeta
}

JobEvaluationsResponse is used to return the evaluations for a job

type JobListRequest

type JobListRequest struct {
	QueryOptions
}

JobListRequest is used to parameterize a list request

type JobListResponse

type JobListResponse struct {
	Jobs []*JobListStub
	QueryMeta
}

JobListResponse is used for a list request

type JobListStub

type JobListStub struct {
	ID                string
	ParentID          string
	Name              string
	Type              string
	Priority          int
	Status            string
	StatusDescription string
	JobSummary        *JobSummary
	CreateIndex       uint64
	ModifyIndex       uint64
	JobModifyIndex    uint64
}

JobListStub is used to return a subset of job information for the job list

type JobPlanRequest added in v0.4.0

type JobPlanRequest struct {
	Job  *Job
	Diff bool // Toggles an annotated diff
	WriteRequest
}

JobPlanRequest is used for the Job.Plan endpoint to trigger a dry-run evaluation of the Job.

type JobPlanResponse added in v0.4.0

type JobPlanResponse struct {
	// Annotations stores annotations explaining decisions the scheduler made.
	Annotations *PlanAnnotations

	// FailedTGAllocs is the placement failures per task group.
	FailedTGAllocs map[string]*AllocMetric

	// JobModifyIndex is the modification index of the job. The value can be
	// used when running `nomad run` to ensure that the Job wasn’t modified
	// since the last plan. If the job is being created, the value is zero.
	JobModifyIndex uint64

	// CreatedEvals is the set of evaluations created by the scheduler. The
	// reasons for this can be rolling-updates or blocked evals.
	CreatedEvals []*Evaluation

	// Diff contains the diff of the job and annotations on whether the change
	// causes an in-place update or create/destroy
	Diff *JobDiff

	// NextPeriodicLaunch is the time duration till the job would be launched if
	// submitted.
	NextPeriodicLaunch time.Time

	WriteMeta
}

JobPlanResponse is used to respond to a job plan request

type JobRegisterRequest

type JobRegisterRequest struct {
	Job *Job

	// If EnforceIndex is set then the job will only be registered if the passed
	// JobModifyIndex matches the current Jobs index. If the index is zero, the
	// register only occurs if the job is new.
	EnforceIndex   bool
	JobModifyIndex uint64

	WriteRequest
}

JobRegisterRequest is used for Job.Register endpoint to register a job as being a schedulable entity.

type JobRegisterResponse

type JobRegisterResponse struct {
	EvalID          string
	EvalCreateIndex uint64
	JobModifyIndex  uint64
	QueryMeta
}

JobRegisterResponse is used to respond to a job registration

type JobSpecificRequest

type JobSpecificRequest struct {
	JobID string
	QueryOptions
}

JobSpecificRequest is used when we just need to specify a target job

type JobSummary added in v0.4.1

type JobSummary struct {
	JobID   string
	Summary map[string]TaskGroupSummary

	// Raft Indexes
	CreateIndex uint64
	ModifyIndex uint64
}

JobSummary summarizes the state of the allocations of a job

func (*JobSummary) Copy added in v0.4.1

func (js *JobSummary) Copy() *JobSummary

Copy returns a new copy of JobSummary

type JobSummaryRequest added in v0.4.1

type JobSummaryRequest struct {
	JobID string
	QueryOptions
}

JobSummaryRequest is used when we just need to get a specific job summary

type JobSummaryResponse added in v0.4.1

type JobSummaryResponse struct {
	JobSummary *JobSummary
	QueryMeta
}

JobSummaryResponse is used to return a single job summary

type KeyringRequest added in v0.5.0

type KeyringRequest struct {
	Key string
}

KeyringRequest is request objects for serf key operations.

type KeyringResponse added in v0.5.0

type KeyringResponse struct {
	Messages map[string]string
	Keys     map[string]int
	NumNodes int
}

KeyringResponse is a unified key response and can be used for install, remove, use, as well as listing key queries.

type LogConfig added in v0.3.0

type LogConfig struct {
	MaxFiles      int `mapstructure:"max_files"`
	MaxFileSizeMB int `mapstructure:"max_file_size"`
}

LogConfig provides configuration for log rotation

func DefaultLogConfig added in v0.3.0

func DefaultLogConfig() *LogConfig

DefaultLogConfig returns the default LogConfig values.

func (*LogConfig) Validate added in v0.3.0

func (l *LogConfig) Validate() error

Validate returns an error if the log config specified are less than the minimum allowed.

type MessageType

type MessageType uint8
const (
	NodeRegisterRequestType MessageType = iota
	NodeDeregisterRequestType
	NodeUpdateStatusRequestType
	NodeUpdateDrainRequestType
	JobRegisterRequestType
	JobDeregisterRequestType
	EvalUpdateRequestType
	EvalDeleteRequestType
	AllocUpdateRequestType
	AllocClientUpdateRequestType
	ReconcileJobSummariesRequestType
	VaultAccessorRegisterRequestType
	VaultAccessorDegisterRequestType
)

type NetworkIndex

type NetworkIndex struct {
	AvailNetworks  []*NetworkResource // List of available networks
	AvailBandwidth map[string]int     // Bandwidth by device
	UsedPorts      map[string]Bitmap  // Ports by IP
	UsedBandwidth  map[string]int     // Bandwidth by device
}

NetworkIndex is used to index the available network resources and the used network resources on a machine given allocations

func NewNetworkIndex

func NewNetworkIndex() *NetworkIndex

NewNetworkIndex is used to construct a new network index

func (*NetworkIndex) AddAllocs

func (idx *NetworkIndex) AddAllocs(allocs []*Allocation) (collide bool)

AddAllocs is used to add the used network resources. Returns true if there is a collision

func (*NetworkIndex) AddReserved

func (idx *NetworkIndex) AddReserved(n *NetworkResource) (collide bool)

AddReserved is used to add a reserved network usage, returns true if there is a port collision

func (*NetworkIndex) AssignNetwork

func (idx *NetworkIndex) AssignNetwork(ask *NetworkResource) (out *NetworkResource, err error)

AssignNetwork is used to assign network resources given an ask. If the ask cannot be satisfied, returns nil

func (*NetworkIndex) Overcommitted

func (idx *NetworkIndex) Overcommitted() bool

Overcommitted checks if the network is overcommitted

func (*NetworkIndex) Release added in v0.3.0

func (idx *NetworkIndex) Release()

Release is called when the network index is no longer needed to attempt to re-use some of the memory it has allocated

func (*NetworkIndex) SetNode

func (idx *NetworkIndex) SetNode(node *Node) (collide bool)

SetNode is used to setup the available network resources. Returns true if there is a collision

type NetworkResource

type NetworkResource struct {
	Device        string // Name of the device
	CIDR          string // CIDR block of addresses
	IP            string // IP address
	MBits         int    // Throughput
	ReservedPorts []Port // Reserved ports
	DynamicPorts  []Port // Dynamically assigned ports
}

NetworkResource is used to represent available network resources

func (*NetworkResource) Add

func (n *NetworkResource) Add(delta *NetworkResource)

Add adds the resources of the delta to this, potentially returning an error if not possible.

func (*NetworkResource) Canonicalize added in v0.4.1

func (n *NetworkResource) Canonicalize()

func (*NetworkResource) Copy

func (n *NetworkResource) Copy() *NetworkResource

Copy returns a deep copy of the network resource

func (*NetworkResource) Diff added in v0.4.0

func (r *NetworkResource) Diff(other *NetworkResource, contextual bool) *ObjectDiff

Diff returns a diff of two network resources. If contextual diff is enabled, non-changed fields will still be returned.

func (*NetworkResource) GoString

func (n *NetworkResource) GoString() string

func (*NetworkResource) MapLabelToValues added in v0.2.0

func (n *NetworkResource) MapLabelToValues(port_map map[string]int) map[string]int

func (*NetworkResource) MeetsMinResources added in v0.3.0

func (n *NetworkResource) MeetsMinResources() error

MeetsMinResources returns an error if the resources specified are less than the minimum allowed.

type Node

type Node struct {
	// ID is a unique identifier for the node. It can be constructed
	// by doing a concatenation of the Name and Datacenter as a simple
	// approach. Alternatively a UUID may be used.
	ID string

	// SecretID is an ID that is only known by the Node and the set of Servers.
	// It is not accessible via the API and is used to authenticate nodes
	// conducting priviledged activities.
	SecretID string

	// Datacenter for this node
	Datacenter string

	// Node name
	Name string

	// HTTPAddr is the address on which the Nomad client is listening for http
	// requests
	HTTPAddr string

	// TLSEnabled indicates if the Agent has TLS enabled for the HTTP API
	TLSEnabled bool

	// Attributes is an arbitrary set of key/value
	// data that can be used for constraints. Examples
	// include "kernel.name=linux", "arch=386", "driver.docker=1",
	// "docker.runtime=1.8.3"
	Attributes map[string]string

	// Resources is the available resources on the client.
	// For example 'cpu=2' 'memory=2048'
	Resources *Resources

	// Reserved is the set of resources that are reserved,
	// and should be subtracted from the total resources for
	// the purposes of scheduling. This may be provide certain
	// high-watermark tolerances or because of external schedulers
	// consuming resources.
	Reserved *Resources

	// Links are used to 'link' this client to external
	// systems. For example 'consul=foo.dc1' 'aws=i-83212'
	// 'ami=ami-123'
	Links map[string]string

	// Meta is used to associate arbitrary metadata with this
	// client. This is opaque to Nomad.
	Meta map[string]string

	// NodeClass is an opaque identifier used to group nodes
	// together for the purpose of determining scheduling pressure.
	NodeClass string

	// ComputedClass is a unique id that identifies nodes with a common set of
	// attributes and capabilities.
	ComputedClass string

	// Drain is controlled by the servers, and not the client.
	// If true, no jobs will be scheduled to this node, and existing
	// allocations will be drained.
	Drain bool

	// Status of this node
	Status string

	// StatusDescription is meant to provide more human useful information
	StatusDescription string

	// StatusUpdatedAt is the time stamp at which the state of the node was
	// updated
	StatusUpdatedAt int64

	// Raft Indexes
	CreateIndex uint64
	ModifyIndex uint64
}

Node is a representation of a schedulable client node

func (*Node) ComputeClass added in v0.3.0

func (n *Node) ComputeClass() error

ComputeClass computes a derived class for the node based on its attributes. ComputedClass is a unique id that identifies nodes with a common set of attributes and capabilities. Thus, when calculating a node's computed class we avoid including any uniquely identifing fields.

func (*Node) Copy added in v0.3.0

func (n *Node) Copy() *Node

func (Node) HashInclude added in v0.3.0

func (n Node) HashInclude(field string, v interface{}) (bool, error)

HashInclude is used to blacklist uniquely identifying node fields from being included in the computed node class.

func (Node) HashIncludeMap added in v0.3.0

func (n Node) HashIncludeMap(field string, k, v interface{}) (bool, error)

HashIncludeMap is used to blacklist uniquely identifying node map keys from being included in the computed node class.

func (*Node) Ready added in v0.5.0

func (n *Node) Ready() bool

Ready returns if the node is ready for running allocations

func (*Node) Stub

func (n *Node) Stub() *NodeListStub

Stub returns a summarized version of the node

func (*Node) TerminalStatus

func (n *Node) TerminalStatus() bool

TerminalStatus returns if the current status is terminal and will no longer transition.

type NodeAllocsResponse

type NodeAllocsResponse struct {
	Allocs []*Allocation
	QueryMeta
}

NodeAllocsResponse is used to return allocs for a single node

type NodeClientAllocsResponse added in v0.3.0

type NodeClientAllocsResponse struct {
	Allocs map[string]uint64
	QueryMeta
}

NodeClientAllocsResponse is used to return allocs meta data for a single node

type NodeDeregisterRequest

type NodeDeregisterRequest struct {
	NodeID string
	WriteRequest
}

NodeDeregisterRequest is used for Node.Deregister endpoint to deregister a node as being a schedulable entity.

type NodeDrainUpdateResponse

type NodeDrainUpdateResponse struct {
	EvalIDs         []string
	EvalCreateIndex uint64
	NodeModifyIndex uint64
	QueryMeta
}

NodeDrainUpdateResponse is used to respond to a node drain update

type NodeEvaluateRequest

type NodeEvaluateRequest struct {
	NodeID string
	WriteRequest
}

NodeEvaluateRequest is used to re-evaluate the ndoe

type NodeListRequest

type NodeListRequest struct {
	QueryOptions
}

NodeListRequest is used to parameterize a list request

type NodeListResponse

type NodeListResponse struct {
	Nodes []*NodeListStub
	QueryMeta
}

JobListResponse is used for a list request

type NodeListStub

type NodeListStub struct {
	ID                string
	Datacenter        string
	Name              string
	NodeClass         string
	Drain             bool
	Status            string
	StatusDescription string
	CreateIndex       uint64
	ModifyIndex       uint64
}

NodeListStub is used to return a subset of job information for the job list

type NodeRegisterRequest

type NodeRegisterRequest struct {
	Node *Node
	WriteRequest
}

NodeRegisterRequest is used for Node.Register endpoint to register a node as being a schedulable entity.

type NodeServerInfo added in v0.4.0

type NodeServerInfo struct {
	// RPCAdvertiseAddr is the IP endpoint that a Nomad Server wishes to
	// be contacted at for RPCs.
	RPCAdvertiseAddr string

	// RpcMajorVersion is the major version number the Nomad Server
	// supports
	RPCMajorVersion int32

	// RpcMinorVersion is the minor version number the Nomad Server
	// supports
	RPCMinorVersion int32

	// Datacenter is the datacenter that a Nomad server belongs to
	Datacenter string
}

NodeServerInfo is used to in NodeUpdateResponse to return Nomad server information used in RPC server lists.

type NodeSpecificRequest

type NodeSpecificRequest struct {
	NodeID   string
	SecretID string
	QueryOptions
}

NodeSpecificRequest is used when we just need to specify a target node

type NodeUpdateDrainRequest

type NodeUpdateDrainRequest struct {
	NodeID string
	Drain  bool
	WriteRequest
}

NodeUpdateDrainRequest is used for updatin the drain status

type NodeUpdateResponse

type NodeUpdateResponse struct {
	HeartbeatTTL    time.Duration
	EvalIDs         []string
	EvalCreateIndex uint64
	NodeModifyIndex uint64

	// LeaderRPCAddr is the RPC address of the current Raft Leader.  If
	// empty, the current Nomad Server is in the minority of a partition.
	LeaderRPCAddr string

	// NumNodes is the number of Nomad nodes attached to this quorum of
	// Nomad Servers at the time of the response.  This value can
	// fluctuate based on the health of the cluster between heartbeats.
	NumNodes int32

	// Servers is the full list of known Nomad servers in the local
	// region.
	Servers []*NodeServerInfo

	QueryMeta
}

NodeUpdateResponse is used to respond to a node update

type NodeUpdateStatusRequest

type NodeUpdateStatusRequest struct {
	NodeID string
	Status string
	WriteRequest
}

NodeUpdateStatusRequest is used for Node.UpdateStatus endpoint to update the status of a node.

type ObjectDiff added in v0.4.0

type ObjectDiff struct {
	Type    DiffType
	Name    string
	Fields  []*FieldDiff
	Objects []*ObjectDiff
}

ObjectDiff contains the diff of two generic objects.

func (*ObjectDiff) GoString added in v0.4.0

func (o *ObjectDiff) GoString() string

func (*ObjectDiff) Less added in v0.4.0

func (o *ObjectDiff) Less(other *ObjectDiff) bool

type ObjectDiffs added in v0.4.0

type ObjectDiffs []*ObjectDiff

For sorting ObjectDiffs

func (ObjectDiffs) Len added in v0.4.0

func (o ObjectDiffs) Len() int

func (ObjectDiffs) Less added in v0.4.0

func (o ObjectDiffs) Less(i, j int) bool

func (ObjectDiffs) Swap added in v0.4.0

func (o ObjectDiffs) Swap(i, j int)

type PeriodicConfig added in v0.2.2

type PeriodicConfig struct {
	// Enabled determines if the job should be run periodically.
	Enabled bool

	// Spec specifies the interval the job should be run as. It is parsed based
	// on the SpecType.
	Spec string

	// SpecType defines the format of the spec.
	SpecType string

	// ProhibitOverlap enforces that spawned jobs do not run in parallel.
	ProhibitOverlap bool `mapstructure:"prohibit_overlap"`
}

Periodic defines the interval a job should be run at.

func (*PeriodicConfig) Copy added in v0.3.0

func (p *PeriodicConfig) Copy() *PeriodicConfig

func (*PeriodicConfig) Next added in v0.2.2

func (p *PeriodicConfig) Next(fromTime time.Time) time.Time

Next returns the closest time instant matching the spec that is after the passed time. If no matching instance exists, the zero value of time.Time is returned. The `time.Location` of the returned value matches that of the passed time.

func (*PeriodicConfig) Validate added in v0.2.2

func (p *PeriodicConfig) Validate() error

type PeriodicForceRequest added in v0.3.0

type PeriodicForceRequest struct {
	JobID string
	WriteRequest
}

PeriodicForceReqeuest is used to force a specific periodic job.

type PeriodicForceResponse added in v0.3.0

type PeriodicForceResponse struct {
	EvalID          string
	EvalCreateIndex uint64
	WriteMeta
}

PeriodicForceResponse is used to respond to a periodic job force launch

type PeriodicLaunch added in v0.3.0

type PeriodicLaunch struct {
	ID     string    // ID of the periodic job.
	Launch time.Time // The last launch time.

	// Raft Indexes
	CreateIndex uint64
	ModifyIndex uint64
}

PeriodicLaunch tracks the last launch time of a periodic job.

type Plan

type Plan struct {
	// EvalID is the evaluation ID this plan is associated with
	EvalID string

	// EvalToken is used to prevent a split-brain processing of
	// an evaluation. There should only be a single scheduler running
	// an Eval at a time, but this could be violated after a leadership
	// transition. This unique token is used to reject plans that are
	// being submitted from a different leader.
	EvalToken string

	// Priority is the priority of the upstream job
	Priority int

	// AllAtOnce is used to control if incremental scheduling of task groups
	// is allowed or if we must do a gang scheduling of the entire job.
	// If this is false, a plan may be partially applied. Otherwise, the
	// entire plan must be able to make progress.
	AllAtOnce bool

	// Job is the parent job of all the allocations in the Plan.
	// Since a Plan only involves a single Job, we can reduce the size
	// of the plan by only including it once.
	Job *Job

	// NodeUpdate contains all the allocations for each node. For each node,
	// this is a list of the allocations to update to either stop or evict.
	NodeUpdate map[string][]*Allocation

	// NodeAllocation contains all the allocations for each node.
	// The evicts must be considered prior to the allocations.
	NodeAllocation map[string][]*Allocation

	// Annotations contains annotations by the scheduler to be used by operators
	// to understand the decisions made by the scheduler.
	Annotations *PlanAnnotations
}

Plan is used to submit a commit plan for task allocations. These are submitted to the leader which verifies that resources have not been overcommitted before admiting the plan.

func (*Plan) AppendAlloc

func (p *Plan) AppendAlloc(alloc *Allocation)

func (*Plan) AppendUpdate

func (p *Plan) AppendUpdate(alloc *Allocation, desiredStatus, desiredDesc, clientStatus string)

AppendUpdate marks the allocation for eviction. The clientStatus of the allocation may be optionally set by passing in a non-empty value.

func (*Plan) IsNoOp

func (p *Plan) IsNoOp() bool

IsNoOp checks if this plan would do nothing

func (*Plan) PopUpdate

func (p *Plan) PopUpdate(alloc *Allocation)

type PlanAnnotations added in v0.4.0

type PlanAnnotations struct {
	// DesiredTGUpdates is the set of desired updates per task group.
	DesiredTGUpdates map[string]*DesiredUpdates
}

PlanAnnotations holds annotations made by the scheduler to give further debug information to operators.

type PlanRequest

type PlanRequest struct {
	Plan *Plan
	WriteRequest
}

PlanRequest is used to submit an allocation plan to the leader

type PlanResponse

type PlanResponse struct {
	Result *PlanResult
	WriteMeta
}

PlanResponse is used to return from a PlanRequest

type PlanResult

type PlanResult struct {
	// NodeUpdate contains all the updates that were committed.
	NodeUpdate map[string][]*Allocation

	// NodeAllocation contains all the allocations that were committed.
	NodeAllocation map[string][]*Allocation

	// RefreshIndex is the index the worker should refresh state up to.
	// This allows all evictions and allocations to be materialized.
	// If any allocations were rejected due to stale data (node state,
	// over committed) this can be used to force a worker refresh.
	RefreshIndex uint64

	// AllocIndex is the Raft index in which the evictions and
	// allocations took place. This is used for the write index.
	AllocIndex uint64
}

PlanResult is the result of a plan submitted to the leader.

func (*PlanResult) FullCommit

func (p *PlanResult) FullCommit(plan *Plan) (bool, int, int)

FullCommit is used to check if all the allocations in a plan were committed as part of the result. Returns if there was a match, and the number of expected and actual allocations.

func (*PlanResult) IsNoOp

func (p *PlanResult) IsNoOp() bool

IsNoOp checks if this plan result would do nothing

type Port added in v0.2.0

type Port struct {
	Label string
	Value int `mapstructure:"static"`
}

type QueryMeta

type QueryMeta struct {
	// This is the index associated with the read
	Index uint64

	// If AllowStale is used, this is time elapsed since
	// last contact between the follower and leader. This
	// can be used to gauge staleness.
	LastContact time.Duration

	// Used to indicate if there is a known leader node
	KnownLeader bool
}

QueryMeta allows a query response to include potentially useful metadata about a query

type QueryOptions

type QueryOptions struct {
	// The target region for this query
	Region string

	// If set, wait until query exceeds given index. Must be provided
	// with MaxQueryTime.
	MinQueryIndex uint64

	// Provided with MinQueryIndex to wait for change.
	MaxQueryTime time.Duration

	// If set, any follower can service the request. Results
	// may be arbitrarily stale.
	AllowStale bool

	// If set, used as prefix for resource list searches
	Prefix string
}

QueryOptions is used to specify various flags for read queries

func (QueryOptions) AllowStaleRead

func (q QueryOptions) AllowStaleRead() bool

func (QueryOptions) IsRead

func (q QueryOptions) IsRead() bool

QueryOption only applies to reads, so always true

func (QueryOptions) RequestRegion

func (q QueryOptions) RequestRegion() string

type RPCInfo

type RPCInfo interface {
	RequestRegion() string
	IsRead() bool
	AllowStaleRead() bool
}

RPCInfo is used to describe common information about query

type RecoverableError added in v0.5.0

type RecoverableError struct {
	Err         string
	Recoverable bool
}

RecoverableError wraps an error and marks whether it is recoverable and could be retried or it is fatal.

func NewRecoverableError added in v0.5.0

func NewRecoverableError(e error, recoverable bool) *RecoverableError

NewRecoverableError is used to wrap an error and mark it as recoverable or not.

func (*RecoverableError) Error added in v0.5.0

func (r *RecoverableError) Error() string

type Resources

type Resources struct {
	CPU      int
	MemoryMB int `mapstructure:"memory"`
	DiskMB   int `mapstructure:"disk"`
	IOPS     int
	Networks []*NetworkResource
}

Resources is used to define the resources available on a client

func AllocsFit

func AllocsFit(node *Node, allocs []*Allocation, netIdx *NetworkIndex) (bool, string, *Resources, error)

AllocsFit checks if a given set of allocations will fit on a node. The netIdx can optionally be provided if its already been computed. If the netIdx is provided, it is assumed that the client has already ensured there are no collisions.

func DefaultResources added in v0.3.0

func DefaultResources() *Resources

DefaultResources returns the default resources for a task.

func (*Resources) Add

func (r *Resources) Add(delta *Resources) error

Add adds the resources of the delta to this, potentially returning an error if not possible.

func (*Resources) Canonicalize added in v0.4.1

func (r *Resources) Canonicalize()

func (*Resources) Copy

func (r *Resources) Copy() *Resources

Copy returns a deep copy of the resources

func (*Resources) Diff added in v0.4.0

func (r *Resources) Diff(other *Resources, contextual bool) *ObjectDiff

Diff returns a diff of two resource objects. If contextual diff is enabled, non-changed fields will still be returned.

func (*Resources) DiskInBytes added in v0.5.0

func (r *Resources) DiskInBytes() int64

DiskInBytes returns the amount of disk resources in bytes.

func (*Resources) GoString

func (r *Resources) GoString() string

func (*Resources) MeetsMinResources added in v0.3.0

func (r *Resources) MeetsMinResources() error

MeetsMinResources returns an error if the resources specified are less than the minimum allowed.

func (*Resources) Merge added in v0.3.0

func (r *Resources) Merge(other *Resources)

Merge merges this resource with another resource.

func (*Resources) NetIndex

func (r *Resources) NetIndex(n *NetworkResource) int

NetIndex finds the matching net index using device name

func (*Resources) Superset

func (r *Resources) Superset(other *Resources) (bool, string)

Superset checks if one set of resources is a superset of another. This ignores network resources, and the NetworkIndex should be used for that.

type RestartPolicy added in v0.2.0

type RestartPolicy struct {
	// Attempts is the number of restart that will occur in an interval.
	Attempts int

	// Interval is a duration in which we can limit the number of restarts
	// within.
	Interval time.Duration

	// Delay is the time between a failure and a restart.
	Delay time.Duration

	// Mode controls what happens when the task restarts more than attempt times
	// in an interval.
	Mode string
}

RestartPolicy configures how Tasks are restarted when they crash or fail.

func NewRestartPolicy added in v0.2.0

func NewRestartPolicy(jobType string) *RestartPolicy

func (*RestartPolicy) Copy added in v0.3.0

func (r *RestartPolicy) Copy() *RestartPolicy

func (*RestartPolicy) Validate added in v0.2.0

func (r *RestartPolicy) Validate() error

type ServerMember added in v0.5.0

type ServerMember struct {
	Name        string
	Addr        net.IP
	Port        uint16
	Tags        map[string]string
	Status      string
	ProtocolMin uint8
	ProtocolMax uint8
	ProtocolCur uint8
	DelegateMin uint8
	DelegateMax uint8
	DelegateCur uint8
}

ServerMember holds information about a Nomad server agent in a cluster

type ServerMembersResponse added in v0.5.0

type ServerMembersResponse struct {
	ServerName   string
	ServerRegion string
	ServerDC     string
	Members      []*ServerMember
}

ServerMembersResponse has the list of servers in a cluster

type Service added in v0.2.0

type Service struct {
	// Name of the service registered with Consul. Consul defaults the
	// Name to ServiceID if not specified.  The Name if specified is used
	// as one of the seed values when generating a Consul ServiceID.
	Name string

	// PortLabel is either the numeric port number or the `host:port`.
	// To specify the port number using the host's Consul Advertise
	// address, specify an empty host in the PortLabel (e.g. `:port`).
	PortLabel string          `mapstructure:"port"`
	Tags      []string        // List of tags for the service
	Checks    []*ServiceCheck // List of checks associated with the service
}

Service represents a Consul service definition in Nomad

func (*Service) Canonicalize added in v0.4.1

func (s *Service) Canonicalize(job string, taskGroup string, task string)

Canonicalize interpolates values of Job, Task Group and Task in the Service Name. This also generates check names, service id and check ids.

func (*Service) Copy added in v0.3.0

func (s *Service) Copy() *Service

func (*Service) Hash added in v0.2.1

func (s *Service) Hash() string

Hash calculates the hash of the check based on it's content and the service which owns it

func (*Service) Validate added in v0.2.0

func (s *Service) Validate() error

Validate checks if the Check definition is valid

func (*Service) ValidateName added in v0.5.0

func (s *Service) ValidateName(name string) error

ValidateName checks if the services Name is valid and should be called after the name has been interpolated

type ServiceCheck added in v0.2.0

type ServiceCheck struct {
	Name          string        // Name of the check, defaults to id
	Type          string        // Type of the check - tcp, http, docker and script
	Command       string        // Command is the command to run for script checks
	Args          []string      // Args is a list of argumes for script checks
	Path          string        // path of the health check url for http type check
	Protocol      string        // Protocol to use if check is http, defaults to http
	PortLabel     string        `mapstructure:"port"` // The port to use for tcp/http checks
	Interval      time.Duration // Interval of the check
	Timeout       time.Duration // Timeout of the response from the check before consul fails the check
	InitialStatus string        `mapstructure:"initial_status"` // Initial status of the check
}

The ServiceCheck data model represents the consul health check that Nomad registers for a Task

func (*ServiceCheck) Canonicalize added in v0.4.1

func (sc *ServiceCheck) Canonicalize(serviceName string)

func (*ServiceCheck) Copy added in v0.3.0

func (sc *ServiceCheck) Copy() *ServiceCheck

func (*ServiceCheck) Hash added in v0.2.1

func (sc *ServiceCheck) Hash(serviceID string) string

func (*ServiceCheck) RequiresPort added in v0.3.2

func (sc *ServiceCheck) RequiresPort() bool

RequiresPort returns whether the service check requires the task has a port.

type SingleAllocResponse

type SingleAllocResponse struct {
	Alloc *Allocation
	QueryMeta
}

SingleAllocResponse is used to return a single allocation

type SingleEvalResponse

type SingleEvalResponse struct {
	Eval *Evaluation
	QueryMeta
}

SingleEvalResponse is used to return a single evaluation

type SingleJobResponse

type SingleJobResponse struct {
	Job *Job
	QueryMeta
}

SingleJobResponse is used to return a single job

type SingleNodeResponse

type SingleNodeResponse struct {
	Node *Node
	QueryMeta
}

SingleNodeResponse is used to return a single node

type Task

type Task struct {
	// Name of the task
	Name string

	// Driver is used to control which driver is used
	Driver string

	// User is used to determine which user will run the task. It defaults to
	// the same user the Nomad client is being run as.
	User string

	// Config is provided to the driver to initialize
	Config map[string]interface{}

	// Map of environment variables to be used by the driver
	Env map[string]string

	// List of service definitions exposed by the Task
	Services []*Service

	// Vault is used to define the set of Vault policies that this task should
	// have access to.
	Vault *Vault

	// Templates are the set of templates to be rendered for the task.
	Templates []*Template

	// Constraints can be specified at a task level and apply only to
	// the particular task.
	Constraints []*Constraint

	// Resources is the resources needed by this task
	Resources *Resources

	// Meta is used to associate arbitrary metadata with this
	// task. This is opaque to Nomad.
	Meta map[string]string

	// KillTimeout is the time between signaling a task that it will be
	// killed and killing it.
	KillTimeout time.Duration `mapstructure:"kill_timeout"`

	// LogConfig provides configuration for log rotation
	LogConfig *LogConfig `mapstructure:"logs"`

	// Artifacts is a list of artifacts to download and extract before running
	// the task.
	Artifacts []*TaskArtifact
}

Task is a single process typically that is executed as part of a task group.

func (*Task) Canonicalize added in v0.4.1

func (t *Task) Canonicalize(job *Job, tg *TaskGroup)

Canonicalize canonicalizes fields in the task.

func (*Task) Copy added in v0.3.0

func (t *Task) Copy() *Task

func (*Task) Diff added in v0.4.0

func (t *Task) Diff(other *Task, contextual bool) (*TaskDiff, error)

Diff returns a diff of two tasks. If contextual diff is enabled, objects within the task will contain field information even if unchanged.

func (*Task) FindHostAndPortFor added in v0.2.1

func (t *Task) FindHostAndPortFor(portLabel string) (string, int)

func (*Task) GoString

func (t *Task) GoString() string

func (*Task) Validate

func (t *Task) Validate(ephemeralDisk *EphemeralDisk) error

Validate is used to sanity check a task

type TaskArtifact added in v0.3.1

type TaskArtifact struct {
	// GetterSource is the source to download an artifact using go-getter
	GetterSource string `mapstructure:"source"`

	// GetterOptions are options to use when downloading the artifact using
	// go-getter.
	GetterOptions map[string]string `mapstructure:"options"`

	// RelativeDest is the download destination given relative to the task's
	// directory.
	RelativeDest string `mapstructure:"destination"`
}

TaskArtifact is an artifact to download before running the task.

func (*TaskArtifact) Copy added in v0.3.1

func (ta *TaskArtifact) Copy() *TaskArtifact

func (*TaskArtifact) GoString added in v0.3.2

func (ta *TaskArtifact) GoString() string

func (*TaskArtifact) Validate added in v0.3.1

func (ta *TaskArtifact) Validate() error

type TaskDiff added in v0.4.0

type TaskDiff struct {
	Type        DiffType
	Name        string
	Fields      []*FieldDiff
	Objects     []*ObjectDiff
	Annotations []string
}

TaskDiff contains the diff of two Tasks

func (*TaskDiff) GoString added in v0.4.0

func (t *TaskDiff) GoString() string

type TaskDiffs added in v0.4.0

type TaskDiffs []*TaskDiff

For sorting TaskDiffs

func (TaskDiffs) Len added in v0.4.0

func (t TaskDiffs) Len() int

func (TaskDiffs) Less added in v0.4.0

func (t TaskDiffs) Less(i, j int) bool

func (TaskDiffs) Swap added in v0.4.0

func (t TaskDiffs) Swap(i, j int)

type TaskEvent added in v0.2.0

type TaskEvent struct {
	Type string
	Time int64 // Unix Nanosecond timestamp

	// FailsTask marks whether this event fails the task
	FailsTask bool

	// Restart fields.
	RestartReason string

	// Setup Failure fields.
	SetupError string

	// Driver Failure fields.
	DriverError string // A driver error occurred while starting the task.

	// Task Terminated Fields.
	ExitCode int    // The exit code of the task.
	Signal   int    // The signal that terminated the task.
	Message  string // A possible message explaining the termination of the task.

	// Killing fields
	KillTimeout time.Duration

	// Task Killed Fields.
	KillError string // Error killing the task.

	// KillReason is the reason the task was killed
	KillReason string

	// TaskRestarting fields.
	StartDelay int64 // The sleep period before restarting the task in unix nanoseconds.

	// Artifact Download fields
	DownloadError string // Error downloading artifacts

	// Validation fields
	ValidationError string // Validation error

	// The maximum allowed task disk size.
	DiskLimit int64

	// Name of the sibling task that caused termination of the task that
	// the TaskEvent refers to.
	FailedSibling string

	// VaultError is the error from token renewal
	VaultError string

	// TaskSignalReason indicates the reason the task is being signalled.
	TaskSignalReason string

	// TaskSignal is the signal that was sent to the task
	TaskSignal string
}

TaskEvent is an event that effects the state of a task and contains meta-data appropriate to the events type.

func NewTaskEvent added in v0.2.0

func NewTaskEvent(event string) *TaskEvent

func (*TaskEvent) Copy added in v0.3.0

func (te *TaskEvent) Copy() *TaskEvent

func (*TaskEvent) GoString added in v0.3.1

func (te *TaskEvent) GoString() string

func (*TaskEvent) SetDiskLimit added in v0.5.0

func (e *TaskEvent) SetDiskLimit(limit int64) *TaskEvent

func (*TaskEvent) SetDownloadError added in v0.3.1

func (e *TaskEvent) SetDownloadError(err error) *TaskEvent

func (*TaskEvent) SetDriverError added in v0.2.0

func (e *TaskEvent) SetDriverError(err error) *TaskEvent

func (*TaskEvent) SetExitCode added in v0.2.0

func (e *TaskEvent) SetExitCode(c int) *TaskEvent

func (*TaskEvent) SetExitMessage added in v0.2.0

func (e *TaskEvent) SetExitMessage(err error) *TaskEvent

func (*TaskEvent) SetFailedSibling added in v0.5.0

func (e *TaskEvent) SetFailedSibling(sibling string) *TaskEvent

func (*TaskEvent) SetFailsTask added in v0.5.0

func (e *TaskEvent) SetFailsTask() *TaskEvent

func (*TaskEvent) SetKillError added in v0.2.0

func (e *TaskEvent) SetKillError(err error) *TaskEvent

func (*TaskEvent) SetKillReason added in v0.5.0

func (e *TaskEvent) SetKillReason(r string) *TaskEvent

func (*TaskEvent) SetKillTimeout added in v0.4.1

func (e *TaskEvent) SetKillTimeout(timeout time.Duration) *TaskEvent

func (*TaskEvent) SetRestartDelay added in v0.3.1

func (e *TaskEvent) SetRestartDelay(delay time.Duration) *TaskEvent

func (*TaskEvent) SetRestartReason added in v0.3.2

func (e *TaskEvent) SetRestartReason(reason string) *TaskEvent

func (*TaskEvent) SetSetupError added in v0.5.0

func (e *TaskEvent) SetSetupError(err error) *TaskEvent

SetSetupError is used to store an error that occured while setting up the task

func (*TaskEvent) SetSignal added in v0.2.0

func (e *TaskEvent) SetSignal(s int) *TaskEvent

func (*TaskEvent) SetTaskSignal added in v0.5.0

func (e *TaskEvent) SetTaskSignal(s os.Signal) *TaskEvent

func (*TaskEvent) SetTaskSignalReason added in v0.5.0

func (e *TaskEvent) SetTaskSignalReason(r string) *TaskEvent

func (*TaskEvent) SetValidationError added in v0.3.2

func (e *TaskEvent) SetValidationError(err error) *TaskEvent

func (*TaskEvent) SetVaultRenewalError added in v0.5.0

func (e *TaskEvent) SetVaultRenewalError(err error) *TaskEvent

type TaskGroup

type TaskGroup struct {
	// Name of the task group
	Name string

	// Count is the number of replicas of this task group that should
	// be scheduled.
	Count int

	// Constraints can be specified at a task group level and apply to
	// all the tasks contained.
	Constraints []*Constraint

	//RestartPolicy of a TaskGroup
	RestartPolicy *RestartPolicy

	// Tasks are the collection of tasks that this task group needs to run
	Tasks []*Task

	// EphemeralDisk is the disk resources that the task group requests
	EphemeralDisk *EphemeralDisk

	// Meta is used to associate arbitrary metadata with this
	// task group. This is opaque to Nomad.
	Meta map[string]string
}

TaskGroup is an atomic unit of placement. Each task group belongs to a job and may contain any number of tasks. A task group support running in many replicas using the same configuration..

func (*TaskGroup) Canonicalize added in v0.4.1

func (tg *TaskGroup) Canonicalize(job *Job)

Canonicalize is used to canonicalize fields in the TaskGroup.

func (*TaskGroup) Copy added in v0.3.0

func (tg *TaskGroup) Copy() *TaskGroup

func (*TaskGroup) Diff added in v0.4.0

func (tg *TaskGroup) Diff(other *TaskGroup, contextual bool) (*TaskGroupDiff, error)

Diff returns a diff of two task groups. If contextual diff is enabled, objects' fields will be stored even if no diff occurred as long as one field changed.

func (*TaskGroup) GoString

func (tg *TaskGroup) GoString() string

func (*TaskGroup) LookupTask

func (tg *TaskGroup) LookupTask(name string) *Task

LookupTask finds a task by name

func (*TaskGroup) Validate

func (tg *TaskGroup) Validate() error

Validate is used to sanity check a task group

type TaskGroupDiff added in v0.4.0

type TaskGroupDiff struct {
	Type    DiffType
	Name    string
	Fields  []*FieldDiff
	Objects []*ObjectDiff
	Tasks   []*TaskDiff
	Updates map[string]uint64
}

TaskGroupDiff contains the diff of two task groups.

func (*TaskGroupDiff) GoString added in v0.4.0

func (tg *TaskGroupDiff) GoString() string

type TaskGroupDiffs added in v0.4.0

type TaskGroupDiffs []*TaskGroupDiff

For sorting TaskGroupDiffs

func (TaskGroupDiffs) Len added in v0.4.0

func (tg TaskGroupDiffs) Len() int

func (TaskGroupDiffs) Less added in v0.4.0

func (tg TaskGroupDiffs) Less(i, j int) bool

func (TaskGroupDiffs) Swap added in v0.4.0

func (tg TaskGroupDiffs) Swap(i, j int)

type TaskGroupSummary added in v0.4.1

type TaskGroupSummary struct {
	Queued   int
	Complete int
	Failed   int
	Running  int
	Starting int
	Lost     int
}

TaskGroup summarizes the state of all the allocations of a particular TaskGroup

type TaskState added in v0.2.0

type TaskState struct {
	// The current state of the task.
	State string

	// Failed marks a task as having failed
	Failed bool

	// Series of task events that transition the state of the task.
	Events []*TaskEvent
}

TaskState tracks the current state of a task and events that caused state transitions.

func (*TaskState) Copy added in v0.3.0

func (ts *TaskState) Copy() *TaskState

func (*TaskState) Successful added in v0.4.0

func (ts *TaskState) Successful() bool

Successful returns whether a task finished successfully.

type Template added in v0.5.0

type Template struct {
	// SourcePath is the path to the template to be rendered
	SourcePath string `mapstructure:"source"`

	// DestPath is the path to where the template should be rendered
	DestPath string `mapstructure:"destination"`

	// EmbeddedTmpl store the raw template. This is useful for smaller templates
	// where they are embedded in the job file rather than sent as an artificat
	EmbeddedTmpl string `mapstructure:"data"`

	// ChangeMode indicates what should be done if the template is re-rendered
	ChangeMode string `mapstructure:"change_mode"`

	// ChangeSignal is the signal that should be sent if the change mode
	// requires it.
	ChangeSignal string `mapstructure:"change_signal"`

	// Splay is used to avoid coordinated restarts of processes by applying a
	// random wait between 0 and the given splay value before signalling the
	// application of a change
	Splay time.Duration `mapstructure:"splay"`
}

Template represents a template configuration to be rendered for a given task

func DefaultTemplate added in v0.5.0

func DefaultTemplate() *Template

DefaultTemplate returns a default template.

func (*Template) Canonicalize added in v0.5.0

func (t *Template) Canonicalize()

func (*Template) Copy added in v0.5.0

func (t *Template) Copy() *Template

func (*Template) Validate added in v0.5.0

func (t *Template) Validate() error

type UpdateStrategy

type UpdateStrategy struct {
	// Stagger is the amount of time between the updates
	Stagger time.Duration

	// MaxParallel is how many updates can be done in parallel
	MaxParallel int `mapstructure:"max_parallel"`
}

UpdateStrategy is used to modify how updates are done

func (*UpdateStrategy) Rolling

func (u *UpdateStrategy) Rolling() bool

Rolling returns if a rolling strategy should be used

type Vault added in v0.5.0

type Vault struct {
	// Policies is the set of policies that the task needs access to
	Policies []string

	// Env marks whether the Vault Token should be exposed as an environment
	// variable
	Env bool

	// ChangeMode is used to configure the task's behavior when the Vault
	// token changes because the original token could not be renewed in time.
	ChangeMode string `mapstructure:"change_mode"`

	// ChangeSignal is the signal sent to the task when a new token is
	// retrieved. This is only valid when using the signal change mode.
	ChangeSignal string `mapstructure:"change_signal"`
}

Vault stores the set of premissions a task needs access to from Vault.

func DefaultVaultBlock added in v0.5.0

func DefaultVaultBlock() *Vault

func (*Vault) Canonicalize added in v0.5.0

func (v *Vault) Canonicalize()

func (*Vault) Copy added in v0.5.0

func (v *Vault) Copy() *Vault

Copy returns a copy of this Vault block.

func (*Vault) Validate added in v0.5.0

func (v *Vault) Validate() error

Validate returns if the Vault block is valid.

type VaultAccessor added in v0.5.0

type VaultAccessor struct {
	AllocID     string
	Task        string
	NodeID      string
	Accessor    string
	CreationTTL int

	// Raft Indexes
	CreateIndex uint64
}

VaultAccessor is a reference to a created Vault token on behalf of an allocation's task.

type VaultAccessorsRequest added in v0.5.0

type VaultAccessorsRequest struct {
	Accessors []*VaultAccessor
}

VaultAccessorsRequest is used to operate on a set of Vault accessors

type VersionResponse

type VersionResponse struct {
	Build    string
	Versions map[string]int
	QueryMeta
}

VersionResponse is used for the Status.Version reseponse

type WriteMeta

type WriteMeta struct {
	// This is the index associated with the write
	Index uint64
}

WriteMeta allows a write response to include potentially useful metadata about the write

type WriteRequest

type WriteRequest struct {
	// The target region for this write
	Region string
}

func (WriteRequest) AllowStaleRead

func (w WriteRequest) AllowStaleRead() bool

func (WriteRequest) IsRead

func (w WriteRequest) IsRead() bool

WriteRequest only applies to writes, always false

func (WriteRequest) RequestRegion

func (w WriteRequest) RequestRegion() string

Directories

Path Synopsis

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL