constants

Documentation

Index

• Constants

Constants

const (
	// DefaultKernelVersion is the default Linux kernel version.
	DefaultKernelVersion = "5.15.54-talos"

	// KernelParamConfig is the kernel parameter name for specifying the URL.
	// to the config.
	KernelParamConfig = "talos.config"

	// ConfigNone indicates no config is required.
	ConfigNone = "none"

	// KernelParamPlatform is the kernel parameter name for specifying the
	// platform.
	KernelParamPlatform = "talos.platform"

	// KernelParamBoard is the kernel parameter name for specifying the
	// SBC.
	KernelParamBoard = "talos.board"

	// KernelParamEventsSink is the kernel parameter name for specifying the
	// events sink server.
	KernelParamEventsSink = "talos.events.sink"

	// KernelParamLoggingKernel is the kernel parameter name for specifying the
	// kernel log delivery destination.
	KernelParamLoggingKernel = "talos.logging.kernel"

	// KernelParamWipe is the kernel parameter name for specifying the
	// disk to wipe on the next boot and reboot.
	KernelParamWipe = "talos.experimental.wipe"

	// BoardNone indicates that the install is not for a specific board.
	BoardNone = "none"

	// BoardLibretechAllH3CCH5 is the  name of the Libre Computer board ALL-H3-CC.
	BoardLibretechAllH3CCH5 = "libretech_all_h3_cc_h5"

	// BoardRPi4 is the  name of the Raspberry Pi 4 Model B.
	BoardRPi4 = "rpi_4"

	// BoardBananaPiM64 is the  name of the Banana Pi M64.
	BoardBananaPiM64 = "bananapi_m64"

	// BoardPine64 is the  name of the Pine64.
	BoardPine64 = "pine64"

	// BoardJetsonNano is the name of the Jetson Nano.
	BoardJetsonNano = "jetson_nano"

	// BoardRock64 is the  name of the Rock64.
	BoardRock64 = "rock64"

	// BoardRockpi4 is the name of the Radxa Rock pi 4 revisions A and B.
	BoardRockpi4 = "rockpi_4"

	// BoardRockpi4c is the name of the Radxa Rock pi 4 revision C.
	BoardRockpi4c = "rockpi_4c"

	// KernelParamHostname is the kernel parameter name for specifying the
	// hostname.
	KernelParamHostname = "talos.hostname"

	// KernelParamShutdown is the kernel parameter for specifying the
	// shutdown type (halt/poweroff).
	KernelParamShutdown = "talos.shutdown"

	// KernelParamNetworkInterfaceIgnore is the kernel parameter for specifying network interfaces which should be ignored by talos.
	KernelParamNetworkInterfaceIgnore = "talos.network.interface.ignore"

	// KernelParamBonding is the kernel parameter for specifying bonded network interfaces.
	KernelParamBonding = "bond"

	// KernelParamPanic is the kernel parameter name for specifying the time to wait until rebooting after kernel panic (0 disables reboot).
	KernelParamPanic = "panic"

	// KernelParamSideroLink is the kernel parameter name to specify SideroLink API endpoint.
	KernelParamSideroLink = "siderolink.api"

	// KernelParamEquinixMetalEvents is the kernel parameter name to specify the Equinix Metal phone home endpoint.
	// This param is injected by Equinix Metal and depends on the device ID and datacenter.
	KernelParamEquinixMetalEvents = "em.events_url"

	// NewRoot is the path where the switchroot target is mounted.
	NewRoot = "/root"

	// ExtensionLayers is the path where the extensions layers are stored.
	ExtensionLayers = "/layers"

	// ExtensionsConfigFile is the extensions layers configuration file name in the initramfs.
	ExtensionsConfigFile = "/extensions.yaml"

	// ExtensionsRuntimeConfigFile extensions layers configuration file name in the rootfs.
	ExtensionsRuntimeConfigFile = "/etc/extensions.yaml"

	// EFIPartitionLabel is the label of the partition to use for mounting at
	// the boot path.
	EFIPartitionLabel = "EFI"

	// EFIMountPoint is the label of the partition to use for mounting at
	// the boot path.
	EFIMountPoint = BootMountPoint + "/EFI"

	// BIOSGrubPartitionLabel is the label of the partition used by grub's second
	// stage bootloader.
	BIOSGrubPartitionLabel = "BIOS"

	// MetaPartitionLabel is the label of the meta partition.
	MetaPartitionLabel = "META"

	// StatePartitionLabel is the label of the state partition.
	StatePartitionLabel = "STATE"

	// StateMountPoint is the label of the partition to use for mounting at
	// the state path.
	StateMountPoint = "/system/state"

	// BootPartitionLabel is the label of the partition to use for mounting at
	// the boot path.
	BootPartitionLabel = "BOOT"

	// BootMountPoint is the label of the partition to use for mounting at
	// the boot path.
	BootMountPoint = "/boot"

	// EphemeralPartitionLabel is the label of the partition to use for
	// mounting at the data path.
	EphemeralPartitionLabel = "EPHEMERAL"

	// EphemeralMountPoint is the label of the partition to use for mounting at
	// the data path.
	EphemeralMountPoint = "/var"

	// RootMountPoint is the label of the partition to use for mounting at
	// the root path.
	RootMountPoint = "/"

	// ISOFilesystemLabel is the label of the ISO file system for the Talos
	// installer.
	ISOFilesystemLabel = "TALOS"

	// PATH defines all locations where executables are stored.
	PATH = "/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:" + cni.DefaultCNIDir

	// KubernetesDefaultCertificateValidityDuration specifies default certificate duration for Kubernetes generated certificates.
	KubernetesDefaultCertificateValidityDuration = time.Hour * 24 * 365

	// DefaultCertificatesDir is the path the the Kubernetes PKI directory.
	DefaultCertificatesDir = "/etc/kubernetes/pki"

	// KubernetesCACert is the path to the root CA certificate.
	KubernetesCACert = DefaultCertificatesDir + "/" + "ca.crt"

	// KubernetesEtcdCACert is the path to the etcd CA certificate.
	KubernetesEtcdCACert = EtcdPKIPath + "/" + "ca.crt"

	// KubernetesEtcdCAKey is the path to the etcd CA private key.
	KubernetesEtcdCAKey = EtcdPKIPath + "/" + "ca.key"

	// KubernetesEtcdCert is the path to the etcd server certificate.
	KubernetesEtcdCert = EtcdPKIPath + "/" + "server.crt"

	// KubernetesEtcdKey is the path to the etcd server private key.
	KubernetesEtcdKey = EtcdPKIPath + "/" + "server.key"

	// KubernetesEtcdPeerCert is the path to the etcd peer certificate.
	KubernetesEtcdPeerCert = EtcdPKIPath + "/" + "peer.crt"

	// KubernetesEtcdPeerKey is the path to the etcd peer private key.
	KubernetesEtcdPeerKey = EtcdPKIPath + "/" + "peer.key"

	// KubernetesEtcdAdminCert is the path to the talos client certificate.
	KubernetesEtcdAdminCert = EtcdPKIPath + "/" + "admin.crt"

	// KubernetesEtcdAdminKey is the path to the talos client private key.
	KubernetesEtcdAdminKey = EtcdPKIPath + "/" + "admin.key"

	// KubernetesEtcdListenClientPort defines the port etcd listen on for client traffic.
	KubernetesEtcdListenClientPort = "2379"

	// KubernetesAdminCertCommonName defines CN property of Kubernetes admin certificate.
	KubernetesAdminCertCommonName = "admin"

	// KubernetesAdminCertOrganization defines Organization values of Kubernetes admin certificate.
	KubernetesAdminCertOrganization = "system:masters"

	// KubernetesAPIServerKubeletClientCommonName defines CN property of Kubernetes API server certificate to access kubelet API.
	KubernetesAPIServerKubeletClientCommonName = "apiserver-kubelet-client"

	// KubernetesControllerManagerOrganization defines Organization value of kube-controller-manager client certificate.
	KubernetesControllerManagerOrganization = "system:kube-controller-manager"

	// KubernetesSchedulerOrganization defines Organization value of kube-scheduler client certificate.
	KubernetesSchedulerOrganization = "system:kube-scheduler"

	// KubernetesAdminCertDefaultLifetime defines default lifetime for Kubernetes generated admin certificate.
	KubernetesAdminCertDefaultLifetime = 365 * 24 * time.Hour

	// KubebernetesStaticSecretsDir defines ephemeral directory which contains rendered secrets for controlplane components.
	KubebernetesStaticSecretsDir = "/system/secrets/kubernetes"

	// KubebernetesStaticConfigDir defines ephemeral directory which contains rendered configs for controlplane components.
	KubebernetesStaticConfigDir = "/system/config/kubernetes"

	// KubernetesAuditLogDir defines the ephemeral directory where the kube-apiserver will store its audit logs.
	KubernetesAuditLogDir = EphemeralMountPoint + "/" + "log" + "/" + "audit" + "/" + "kube"

	// KubernetesAPIServerSecretsDir defines directory with kube-apiserver secrets.
	KubernetesAPIServerSecretsDir = KubebernetesStaticSecretsDir + "/" + "kube-apiserver"

	// KubernetesAPIServerConfigDir defines directory with kube-apiserver configs.
	KubernetesAPIServerConfigDir = KubebernetesStaticConfigDir + "/" + "kube-apiserver"

	// KubernetesControllerManagerSecretsDir defines ephemeral directory with kube-controller-manager secrets.
	KubernetesControllerManagerSecretsDir = KubebernetesStaticSecretsDir + "/" + "kube-controller-manager"

	// KubernetesSchedulerSecretsDir defines ephemeral directory with kube-scheduler secrets.
	KubernetesSchedulerSecretsDir = KubebernetesStaticSecretsDir + "/" + "kube-scheduler"

	// KubernetesRunUser defines UID to run control plane components.
	KubernetesRunUser = 65534

	// KubeletBootstrapKubeconfig is the path to the kubeconfig required to
	// bootstrap the kubelet.
	KubeletBootstrapKubeconfig = "/etc/kubernetes/bootstrap-kubeconfig"

	// KubeletPort is the kubelet port for secure API.
	KubeletPort = 10250

	// KubeletOOMScoreAdj oom_score_adj config.
	KubeletOOMScoreAdj = -450

	// KubeletPKIDir is the path to the directory where kubelet stores issued certificates and keys.
	KubeletPKIDir = "/var/lib/kubelet/pki"

	// SystemKubeletPKIDir is the path to the directory where Talos copies kubelet issued certificates and keys.
	SystemKubeletPKIDir = "/system/secrets/kubelet"

	// KubeletShutdownGracePeriod is the kubelet shutdown grace period.
	KubeletShutdownGracePeriod = 30 * time.Second

	// KubeletShutdownGracePeriodCriticalPods is the kubelet shutdown grace period for critical pods.
	//
	// Should be less than KubeletShutdownGracePeriod.
	KubeletShutdownGracePeriodCriticalPods = 10 * time.Second

	// DefaultKubernetesVersion is the default target version of the control plane.
	DefaultKubernetesVersion = "1.24.2"

	// DefaultControlPlanePort is the default port to use for the control plane.
	DefaultControlPlanePort = 6443

	// KubeletImage is the enforced kubelet image to use.
	KubeletImage = "ghcr.io/siderolabs/kubelet"

	// KubeProxyImage is the enforced kube-proxy image to use for the control plane.
	KubeProxyImage = "k8s.gcr.io/kube-proxy"

	// KubernetesAPIServerImage is the enforced apiserver image to use for the control plane.
	KubernetesAPIServerImage = "k8s.gcr.io/kube-apiserver"

	// KubernetesControllerManagerImage is the enforced controllermanager image to use for the control plane.
	KubernetesControllerManagerImage = "k8s.gcr.io/kube-controller-manager"

	// KubernetesProxyImage is the enforced proxy image to use for the control plane.
	KubernetesProxyImage = "k8s.gcr.io/kube-proxy"

	// KubernetesSchedulerImage is the enforced scheduler image to use for the control plane.
	KubernetesSchedulerImage = "k8s.gcr.io/kube-scheduler"

	// CoreDNSImage is the enforced CoreDNS image to use.
	CoreDNSImage = "docker.io/coredns/coredns"

	// DefaultCoreDNSVersion is the default version for the CoreDNS.
	DefaultCoreDNSVersion = "1.9.3"

	// LabelNodeRoleMaster is the node label required by a control plane node.
	LabelNodeRoleMaster = "node-role.kubernetes.io/master"

	// LabelNodeRoleControlPlane is the node label required by a control plane node.
	LabelNodeRoleControlPlane = "node-role.kubernetes.io/control-plane"

	// ManifestsDirectory is the directory that contains all static manifests.
	ManifestsDirectory = "/etc/kubernetes/manifests"

	// TalosManifestPrefix is the prefix for static pod files created in ManifestsDirectory by Talos.
	TalosManifestPrefix = "talos-"

	// KubeletKubeconfig is the generated kubeconfig for kubelet.
	KubeletKubeconfig = "/etc/kubernetes/kubeconfig-kubelet"

	// KubeletSystemReservedCPU cpu system reservation value for kubelet kubeconfig.
	KubeletSystemReservedCPU = "50m"

	// KubeletSystemReservedMemory memory system reservation value for kubelet kubeconfig.
	KubeletSystemReservedMemory = "192Mi"

	// KubeletSystemReservedPid pid system reservation value for kubelet kubeconfig.
	KubeletSystemReservedPid = "100"

	// KubeletSystemReservedEphemeralStorage ephemeral-storage system reservation value for kubelet kubeconfig.
	KubeletSystemReservedEphemeralStorage = "256Mi"

	// DefaultEtcdVersion is the default target version of etcd.
	DefaultEtcdVersion = "v3.5.4"

	// EtcdRootTalosKey is the root etcd key for Talos-specific storage.
	EtcdRootTalosKey = "talos:v1"

	// EtcdTalosEtcdUpgradeMutex is the etcd mutex prefix to be used to set an etcd upgrade lock.
	EtcdTalosEtcdUpgradeMutex = EtcdRootTalosKey + ":etcdUpgradeMutex"

	// EtcdTalosManifestApplyMutex is the etcd election .
	EtcdTalosManifestApplyMutex = EtcdRootTalosKey + ":manifestApplyMutex"

	// EtcdImage is the reposistory for the etcd image.
	EtcdImage = "gcr.io/etcd-development/etcd"

	// EtcdPKIPath is the path to the etcd PKI directory.
	EtcdPKIPath = "/system/secrets/etcd"

	// EtcdDataPath is the path where etcd stores its' data.
	EtcdDataPath = "/var/lib/etcd"

	// EtcdRecoverySnapshotPath is the path where etcd snapshot is uploaded for recovery.
	EtcdRecoverySnapshotPath = "/var/lib/etcd.snapshot"

	// EtcdUserID is the user ID for the etcd process.
	EtcdUserID = 60

	// ConfigPath is the path to the downloaded config.
	ConfigPath = StateMountPoint + "/config.yaml"

	// ConfigTryTimeout is the timeout of the config apply in try mode.
	ConfigTryTimeout = time.Minute

	// MetalConfigISOLabel is the volume label for ISO based configuration.
	MetalConfigISOLabel = "metal-iso"

	// ConfigGuestInfo is the name of the VMware guestinfo config strategy.
	ConfigGuestInfo = "guestinfo"

	// VMwareGuestInfoConfigKey is the guestinfo key used to provide a config file.
	VMwareGuestInfoConfigKey = "talos.config"

	// VMwareGuestInfoFallbackKey is the fallback guestinfo key used to provide a config file.
	VMwareGuestInfoFallbackKey = "userdata"

	// VMwareGuestInfoOvfEnvKey is the guestinfo key used to provide the OVF environment.
	VMwareGuestInfoOvfEnvKey = "ovfenv"

	// AuditPolicyPath is the path to the audit-policy.yaml relative to initramfs.
	AuditPolicyPath = "/etc/kubernetes/audit-policy.yaml"

	// EncryptionConfigPath is the path to the EncryptionConfig relative to initramfs.
	EncryptionConfigPath = "/etc/kubernetes/encryptionconfig.yaml"

	// EncryptionConfigRootfsPath is the path to the EncryptionConfig relative to rootfs.
	EncryptionConfigRootfsPath = "/etc/kubernetes/encryptionconfig.yaml"

	// ApidPort is the port for the apid service.
	ApidPort = 50000

	// ApidUserID is the user ID for apid.
	ApidUserID = 50

	// TrustdPort is the port for the trustd service.
	TrustdPort = 50001

	// TrustdUserID is the user ID for trustd.
	TrustdUserID = 51

	// DefaultContainerdVersion is the default container runtime version.
	DefaultContainerdVersion = "1.6.6"

	// SystemContainerdNamespace is the Containerd namespace for Talos services.
	SystemContainerdNamespace = "system"

	// SystemContainerdAddress is the path to the system containerd socket.
	SystemContainerdAddress = SystemRunPath + "/containerd/containerd.sock"

	// CRIContainerdAddress is the path to the CRI containerd socket address.
	CRIContainerdAddress = "/run/containerd/containerd.sock"

	// CRIContainerdConfig is the path to the config for the containerd instance that provides the CRI.
	CRIContainerdConfig = "/etc/cri/containerd.toml"

	// CRIConfdPath is the path to the directory providing parts of CRI plugin configuration.
	CRIConfdPath = "/etc/cri/conf.d"

	// CRIConfig is the path to the CRI merged configuration file relative to /etc.
	CRIConfig = "cri/conf.d/cri.toml"

	// CRIRegistryConfigPart is the path to the CRI generated registry configuration relative to /etc.
	CRIRegistryConfigPart = "cri/conf.d/01-registries.part"

	// TalosConfigEnvVar is the environment variable for setting the Talos configuration file path.
	TalosConfigEnvVar = "TALOSCONFIG"

	// APISocketPath is the path to file socket of apid.
	APISocketPath = SystemRunPath + "/apid/apid.sock"

	// APIRuntimeSocketPath is the path to file socket of runtime server for apid.
	APIRuntimeSocketPath = SystemRunPath + "/apid/runtime.sock"

	// MachineSocketPath is the path to file socket of machine API.
	MachineSocketPath = SystemRunPath + "/machined/machine.sock"

	// NetworkSocketPath is the path to file socket of network API.
	NetworkSocketPath = SystemRunPath + "/networkd/networkd.sock"

	// ArchVariable is replaced automatically by the target cluster arch.
	ArchVariable = "${ARCH}"

	// KernelAsset defines a well known name for our kernel filename.
	KernelAsset = "vmlinuz"

	// KernelAssetWithArch defines a well known name for our kernel filename with arch variable.
	KernelAssetWithArch = "vmlinuz-" + ArchVariable

	// KernelAssetPath is the path to the kernel on disk.
	KernelAssetPath = "/usr/install/%s/" + KernelAsset

	// InitramfsAsset defines a well known name for our initramfs filename.
	InitramfsAsset = "initramfs.xz"

	// InitramfsAssetWithArch defines a well known name for our initramfs filename with arch variable.
	InitramfsAssetWithArch = "initramfs-" + ArchVariable + ".xz"

	// InitramfsAssetPath is the path to the initramfs on disk.
	InitramfsAssetPath = "/usr/install/%s/" + InitramfsAsset

	// RootfsAsset defines a well known name for our rootfs filename.
	RootfsAsset = "rootfs.sqsh"

	// DefaultCertificateValidityDuration is the default duration for a certificate.
	DefaultCertificateValidityDuration = x509.DefaultCertificateValidityDuration

	// SystemPath is the path to write temporary runtime system related files
	// and directories.
	SystemPath = "/system"

	// VarSystemOverlaysPath is the path where overlay mounts are created.
	VarSystemOverlaysPath = "/var/system/overlays"

	// SystemRunPath is the path to the system run directory.
	SystemRunPath = SystemPath + "/run"

	// SystemVarPath is the path to the system var directory.
	SystemVarPath = SystemPath + "/var"

	// SystemEtcPath is the path to the system etc directory.
	SystemEtcPath = SystemPath + "/etc"

	// SystemLibexecPath is the path to the system libexec directory.
	SystemLibexecPath = SystemPath + "/libexec"

	// SystemExtensionsPath is the path to the system extensions directory.
	SystemExtensionsPath = SystemPath + "/extensions"

	// SystemOverlaysPath is the path to the system overlay directory.
	SystemOverlaysPath = SystemPath + "/overlays"

	// CgroupMountPath is the default mount path for unified cgroupsv2 setup.
	CgroupMountPath = "/sys/fs/cgroup"

	// CgroupInit is the cgroup name for init process.
	CgroupInit = "/init"

	// CgroupInitReservedMemory is the hard memory protection for the init process.
	CgroupInitReservedMemory = 96 * 1024 * 1024

	// CgroupSystem is the cgroup name for system processes.
	CgroupSystem = "/system"

	// CgroupSystemReservedMemory is the hard memory protection for the system processes.
	CgroupSystemReservedMemory = 96 * 1024 * 1024

	// CgroupSystemRuntime is the cgroup name for containerd runtime processes.
	CgroupSystemRuntime = CgroupSystem + "/runtime"

	// CgroupExtensions is the cgroup name for system extension processes.
	CgroupExtensions = CgroupSystem + "/extensions"

	// CgroupPodRuntime is the cgroup name for kubernetes containerd runtime processes.
	CgroupPodRuntime = "/podruntime/runtime"

	// CgroupPodRuntimeReservedMemory is the hard memory protection for the cri runtime processes.
	CgroupPodRuntimeReservedMemory = 128 * 1024 * 1024

	// CgroupKubelet is the cgroup name for kubelet process.
	CgroupKubelet = "/podruntime/kubelet"

	// CgroupKubeletReservedMemory is the hard memory protection for the kubelet processes.
	CgroupKubeletReservedMemory = 64 * 1024 * 1024

	// FlannelCNI is the string to use Tanos-managed Flannel CNI (default).
	FlannelCNI = "flannel"

	// CustomCNI is the string to use custom CNI managed by Tanos with extra manifests.
	CustomCNI = "custom"

	// NoneCNI is the string to indicate that CNI will not be managed by Talos.
	NoneCNI = "none"

	// DefaultIPv4PodNet is the IPv4 network to be used for kubernetes Pods.
	DefaultIPv4PodNet = "10.244.0.0/16"

	// DefaultIPv4ServiceNet is the IPv4 network to be used for kubernetes Services.
	DefaultIPv4ServiceNet = "10.96.0.0/12"

	// DefaultIPv6PodNet is the IPv6 network to be used for kubernetes Pods.
	DefaultIPv6PodNet = "fc00:db8:10::/56"

	// DefaultIPv6ServiceNet is the IPv6 network to be used for kubernetes Services.
	DefaultIPv6ServiceNet = "fc00:db8:20::/112"

	// DefaultDNSDomain is the default DNS domain.
	DefaultDNSDomain = "cluster.local"

	// BootTimeout is the timeout to run all services.
	BootTimeout = 70 * time.Minute

	// FailurePauseTimeout is the timeout for the sequencer failures which can be fixed by updating the machine config.
	FailurePauseTimeout = 35 * time.Minute

	// EtcdJoinTimeout is the timeout for etcd to join the existing cluster.
	//
	// BootTimeout should be higher than EtcdJoinTimeout.
	EtcdJoinTimeout = 30 * time.Minute

	// NodeReadyTimeout is the timeout to wait for the node to be ready (CNI to be running).
	// For bootstrap API, this includes time to run bootstrap.
	NodeReadyTimeout = BootTimeout

	// AnnotationCordonedKey is the annotation key for the nodes cordoned by Talos.
	AnnotationCordonedKey = "talos.dev/cordoned"

	// AnnotationCordonedValue is the annotation key for the nodes cordoned by Talos.
	AnnotationCordonedValue = "true"

	// AnnotationStaticPodSecretsVersion is the annotation key for the static pod secret version.
	AnnotationStaticPodSecretsVersion = "talos.dev/secrets-version"

	// AnnotationStaticPodConfigVersion is the annotation key for the static pod config version.
	AnnotationStaticPodConfigVersion = "talos.dev/config-version"

	// AnnotationStaticPodConfigFileVersion is the annotation key for the static pod configuration file version.
	AnnotationStaticPodConfigFileVersion = "talos.dev/config-file-version"

	// DefaultNTPServer is the NTP server to use if not configured explicitly.
	//
	// TODO: Once we get naming sorted we need to apply for a project specific address
	// https://manage.ntppool.org/manage/vendor
	DefaultNTPServer = "pool.ntp.org"

	// DefaultPrimaryResolver is the default primary DNS server.
	DefaultPrimaryResolver = "1.1.1.1"

	// DefaultSecondaryResolver is the default secondary DNS server.
	DefaultSecondaryResolver = "8.8.8.8"

	// DefaultClusterIDSize is the default size in bytes for the cluster ID token.
	DefaultClusterIDSize = 32

	// DefaultClusterSecretSize is the default size in bytes for the cluster secret.
	DefaultClusterSecretSize = 32

	// DefaultNodeIdentitySize is the default size in bytes for the node ID.
	DefaultNodeIdentitySize = 32

	// NodeIdentityFilename is the filename to cache node identity across reboots.
	NodeIdentityFilename = "node-identity.yaml"

	// DefaultDiscoveryServiceEndpoint is the default endpoint for Talos discovery service.
	DefaultDiscoveryServiceEndpoint = "https://discovery.talos.dev/"

	// KubeSpanIdentityFilename is the filename to cache KubeSpan identity across reboots.
	KubeSpanIdentityFilename = "kubespan-identity.yaml"

	// KubeSpanDefaultPort is the default Wireguard listening port for incoming connections.
	KubeSpanDefaultPort = 51820

	// KubeSpanDefaultRoutingTable is the default routing table for KubeSpan LAN targets.
	//
	// This specifies the routing table which will be used for Wireguard-available destinations.
	KubeSpanDefaultRoutingTable = 180

	// KubeSpanDefaultFirewallMark is the default firewall mark to use for Wireguard encrypted egress packets.
	//
	// Normal Wireguard configurations will NOT use this firewall mark.
	KubeSpanDefaultFirewallMark = 0x51820

	// KubeSpanDefaultForceFirewallMark is the default firewall mark to use for packets destined to IPs serviced by KubeSpan.
	//
	// It is used to signal that matching packets should be forced into the Wireguard interface.
	KubeSpanDefaultForceFirewallMark = 0x51821

	// KubeSpanDefaultPeerKeepalive is the interval at which Wireguard Peer Keepalives should be sent.
	KubeSpanDefaultPeerKeepalive = 25 * time.Second

	// NetworkSelfIPsAnnotation is the node annotation used to list the (comma-separated) IP addresses of the host, as discovered by Talos tooling.
	NetworkSelfIPsAnnotation = "networking.talos.dev/self-ips"

	// ClusterNodeIDAnnotation is the node annotation used to represent node ID.
	ClusterNodeIDAnnotation = "cluster.talos.dev/node-id"

	// KubeSpanIPAnnotation is the node annotation to be used for indicating the Wireguard IP of the node.
	KubeSpanIPAnnotation = "networking.talos.dev/kubespan-ip"

	// KubeSpanPublicKeyAnnotation is the node annotation to be used for indicating the Wireguard Public Key of the node.
	KubeSpanPublicKeyAnnotation = "networking.talos.dev/kubespan-public-key"

	// KubeSpanAssignedPrefixesAnnotation is the node annotation use to list the (comma-separated) set of IP prefixes for which the annotated node should be responsible.
	KubeSpanAssignedPrefixesAnnotation = "networking.talos.dev/assigned-prefixes"

	// KubeSpanKnownEndpointsAnnotation is the node annotation used to list the (comma-separated) known-good Wireguard endpoints for the node, as seen by other peers.
	KubeSpanKnownEndpointsAnnotation = "networking.talos.dev/kubespan-endpoints"

	// KubeSpanLinkName is the link name for the KubeSpan Wireguard interface.
	KubeSpanLinkName = "kubespan"

	// UdevRulesPath rules file path.
	UdevRulesPath = "/usr/etc/udev/rules.d/99-talos.rules"

	// LoggingFormatJSONLines represents "JSON lines" logging format.
	LoggingFormatJSONLines = "json_lines"

	// SideroLinkName is the interface name for SideroLink.
	SideroLinkName = "siderolink"

	// SideroLinkDefaultPeerKeepalive is the interval at which Wireguard Peer Keepalives should be sent.
	SideroLinkDefaultPeerKeepalive = 25 * time.Second

	// PlatformNetworkConfigFilename is the filename to cache platform network configuration reboots.
	PlatformNetworkConfigFilename = "platform-network.yaml"

	// FirmwarePath is the path to the standard Linux firmware location.
	FirmwarePath = "/lib/firmware"

	// ExtensionServicesConfigPath is the directory path which contains  configuration files of extension services.
	//
	// See pkg/machinery/extensions/services for the file format.
	ExtensionServicesConfigPath = "/usr/local/etc/containers"

	// ExtensionServicesRootfsPath is the path to the extracted rootfs files of extension services.
	ExtensionServicesRootfsPath = "/usr/local/lib/containers"

	// DBusServiceSocketPath is the path to the D-Bus socket for the logind mock to connect to.
	DBusServiceSocketPath = SystemRunPath + "/dbus/service.socket"

	// DBusClientSocketPath is the path to the D-Bus socket for the kubelet to connect to.
	DBusClientSocketPath = "/run/dbus/system_bus_socket"

	// GoVersion is the version of Go compiler this release was built with.
	GoVersion = "go1.18.4"
)

const (
	// SYSLOG_ACTION_SIZE_BUFFER is a named type argument to klogctl.
	//nolint:golint
	SYSLOG_ACTION_SIZE_BUFFER = 10

	// SYSLOG_ACTION_READ_ALL is a named type argument to klogctl.
	//nolint:golint
	SYSLOG_ACTION_READ_ALL = 3
)

See https://linux.die.net/man/3/klogctl