types

package
v0.0.0-...-e305a27 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: May 24, 2024 License: GPL-3.0 Imports: 26 Imported by: 0

Documentation

Overview

Package types contains data types related to Ethereum consensus.

Index

Constants

View Source
const (
	// BloomByteLength represents the number of bytes used in a header log bloom.
	BloomByteLength = 256

	// BloomBitLength represents the number of bits used in a header log bloom.
	BloomBitLength = 8 * BloomByteLength
)
View Source
const (
	// ReceiptStatusFailed is the status code of a transaction if execution failed.
	ReceiptStatusFailed = uint64(0)

	// ReceiptStatusSuccessful is the status code of a transaction if execution succeeded.
	ReceiptStatusSuccessful = uint64(1)

	// The version number for post-canyon deposit receipts.
	CanyonDepositReceiptVersion = uint64(1)
)
View Source
const (
	// The two 4-byte Ecotone fee scalar values are packed into the same storage slot as the 8-byte
	// sequence number and have the following Solidity offsets within the slot. Note that Solidity
	// offsets correspond to the last byte of the value in the slot, counting backwards from the
	// end of the slot. For example, The 8-byte sequence number has offset 0, and is therefore
	// stored as big-endian format in bytes [24:32) of the slot.
	BaseFeeScalarSlotOffset     = 12 // bytes [16:20) of the slot
	BlobBaseFeeScalarSlotOffset = 8  // bytes [20:24) of the slot

)
View Source
const (
	LegacyTxType     = 0x00
	AccessListTxType = 0x01
	DynamicFeeTxType = 0x02
	BlobTxType       = 0x03
)

Transaction types.

View Source
const DepositTxType = 0x7E

Variables

View Source
var (
	// EmptyRootHash is the known root hash of an empty merkle trie.
	EmptyRootHash = common.HexToHash("56e81f171bcc55a6ff8345e692c0f86e5b48e01b996cadc001622fb5e363b421")

	// EmptyUncleHash is the known hash of the empty uncle set.
	EmptyUncleHash = rlpHash([]*Header(nil)) // 1dcc4de8dec75d7aab85b567b6ccd41ad312451b948a7413f0a142fd40d49347

	// EmptyCodeHash is the known hash of the empty EVM bytecode.
	EmptyCodeHash = crypto.Keccak256Hash(nil) // c5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470

	// EmptyTxsHash is the known hash of the empty transaction set.
	EmptyTxsHash = common.HexToHash("56e81f171bcc55a6ff8345e692c0f86e5b48e01b996cadc001622fb5e363b421")

	// EmptyReceiptsHash is the known hash of the empty receipt set.
	EmptyReceiptsHash = common.HexToHash("56e81f171bcc55a6ff8345e692c0f86e5b48e01b996cadc001622fb5e363b421")

	// EmptyWithdrawalsHash is the known hash of the empty withdrawal set.
	EmptyWithdrawalsHash = common.HexToHash("56e81f171bcc55a6ff8345e692c0f86e5b48e01b996cadc001622fb5e363b421")

	// EmptyVerkleHash is the known hash of an empty verkle trie.
	EmptyVerkleHash = common.Hash{}
)
View Source
var (
	// BedrockL1AttributesSelector is the function selector indicating Bedrock style L1 gas
	// attributes.
	BedrockL1AttributesSelector = []byte{0x01, 0x5d, 0x8e, 0xb9}
	// EcotoneL1AttributesSelector is the selector indicating Ecotone style L1 gas attributes.
	EcotoneL1AttributesSelector = []byte{0x44, 0x0a, 0x5e, 0x20}

	// L1BlockAddr is the address of the L1Block contract which stores the L1 gas attributes.
	L1BlockAddr = common.HexToAddress("0x4200000000000000000000000000000000000015")

	L1BaseFeeSlot = common.BigToHash(big.NewInt(1))
	OverheadSlot  = common.BigToHash(big.NewInt(5))
	ScalarSlot    = common.BigToHash(big.NewInt(6))

	// L1BlobBaseFeeSlot was added with the Ecotone upgrade and stores the blobBaseFee L1 gas
	// attribute.
	L1BlobBaseFeeSlot = common.BigToHash(big.NewInt(7))
	// L1FeeScalarsSlot as of the Ecotone upgrade stores the 32-bit basefeeScalar and
	// blobBaseFeeScalar L1 gas attributes at offsets `BaseFeeScalarSlotOffset` and
	// `BlobBaseFeeScalarSlotOffset` respectively.
	L1FeeScalarsSlot = common.BigToHash(big.NewInt(3))

	L1CostIntercept  = big.NewInt(-42_585_600)
	L1CostFastlzCoef = big.NewInt(836_500)

	MinTransactionSize       = big.NewInt(100)
	MinTransactionSizeScaled = new(big.Int).Mul(MinTransactionSize, big.NewInt(1e6))
)
View Source
var (
	ErrInvalidSig           = errors.New("invalid transaction v, r, s values")
	ErrUnexpectedProtection = errors.New("transaction type does not supported EIP-155 protected signatures")
	ErrInvalidTxType        = errors.New("transaction type not valid in this context")
	ErrTxTypeNotSupported   = errors.New("transaction type not supported")
	ErrGasFeeCapTooLow      = errors.New("fee cap less than base fee")
)
View Source
var ErrInvalidChainId = errors.New("invalid chain id for signer")

Functions

func Bloom9

func Bloom9(data []byte) []byte

Bloom9 returns the bloom filter for the given data

func BloomLookup

func BloomLookup(bin Bloom, topic bytesBacked) bool

BloomLookup is a convenience-method to check presence in the bloom filter

func CalcUncleHash

func CalcUncleHash(uncles []*Header) common.Hash

func DeriveSha

func DeriveSha(list DerivableList, hasher TrieHasher) common.Hash

DeriveSha creates the tree hashes of transactions, receipts, and withdrawals in a block header.

func FlzCompressLen

func FlzCompressLen(ib []byte) uint32

FlzCompressLen returns the length of the data after compression through FastLZ, based on https://github.com/Vectorized/solady/blob/5315d937d79b335c668896d7533ac603adac5315/js/solady.js

func FullAccountRLP

func FullAccountRLP(data []byte) ([]byte, error)

FullAccountRLP converts data on the 'slim RLP' format into the full RLP-format.

func HashDifference

func HashDifference(a, b []common.Hash) []common.Hash

HashDifference returns a new set which is the difference between a and b.

func HeaderParentHashFromRLP

func HeaderParentHashFromRLP(header []byte) common.Hash

HeaderParentHashFromRLP returns the parentHash of an RLP-encoded header. If 'header' is invalid, the zero hash is returned.

func L1Cost

func L1Cost(rollupDataGas uint64, l1BaseFee, overhead, scalar *big.Int) *big.Int

L1Cost computes the the data availability fee for transactions in blocks prior to the Ecotone upgrade. It is used by e2e tests so must remain exported.

func LogsBloom

func LogsBloom(logs []*Log) []byte

LogsBloom returns the bloom bytes for the given logs

func NewL1CostFuncFjord

func NewL1CostFuncFjord(l1BaseFee, l1BlobBaseFee, baseFeeScalar, blobFeeScalar *big.Int) l1CostFunc

NewL1CostFuncFjord returns an l1 cost function suitable for the Fjord upgrade

func Sender

func Sender(signer Signer, tx *Transaction) (common.Address, error)

Sender returns the address derived from the signature (V, R, S) using secp256k1 elliptic curve and an error if it failed deriving or upon an incorrect signature.

Sender may cache the address, allowing it to be used regardless of signing method. The cache is invalidated if the cached signer does not match the signer used in the current call.

func SlimAccountRLP

func SlimAccountRLP(account StateAccount) []byte

SlimAccountRLP encodes the state account in 'slim RLP' format.

func TrieRootHash

func TrieRootHash(hash common.Hash) common.Hash

TrieRootHash returns the hash itself if it's non-empty or the predefined emptyHash one instead.

Types

type AccessList

type AccessList []AccessTuple

AccessList is an EIP-2930 access list.

func (AccessList) StorageKeys

func (al AccessList) StorageKeys() int

StorageKeys returns the total number of storage keys in the access list.

type AccessListTx

type AccessListTx struct {
	ChainID    *big.Int        // destination chain ID
	Nonce      uint64          // nonce of sender account
	GasPrice   *big.Int        // wei per gas
	Gas        uint64          // gas limit
	To         *common.Address `rlp:"nil"` // nil means contract creation
	Value      *big.Int        // wei amount
	Data       []byte          // contract invocation input data
	AccessList AccessList      // EIP-2930 access list
	V, R, S    *big.Int        // signature values
}

AccessListTx is the data of EIP-2930 access list transactions.

type AccessTuple

type AccessTuple struct {
	Address     common.Address `json:"address"     gencodec:"required"`
	StorageKeys []common.Hash  `json:"storageKeys" gencodec:"required"`
}

AccessTuple is the element type of an access list.

func (AccessTuple) MarshalJSON

func (a AccessTuple) MarshalJSON() ([]byte, error)

MarshalJSON marshals as JSON.

func (*AccessTuple) UnmarshalJSON

func (a *AccessTuple) UnmarshalJSON(input []byte) error

UnmarshalJSON unmarshals from JSON.

type Account

type Account struct {
	Code    []byte                      `json:"code,omitempty"`
	Storage map[common.Hash]common.Hash `json:"storage,omitempty"`
	Balance *big.Int                    `json:"balance" gencodec:"required"`
	Nonce   uint64                      `json:"nonce,omitempty"`

	// used in tests
	PrivateKey []byte `json:"secretKey,omitempty"`
}

Account represents an Ethereum account and its attached data. This type is used to specify accounts in the genesis block state, and is also useful for JSON encoding/decoding of accounts.

func (Account) MarshalJSON

func (a Account) MarshalJSON() ([]byte, error)

MarshalJSON marshals as JSON.

func (*Account) UnmarshalJSON

func (a *Account) UnmarshalJSON(input []byte) error

UnmarshalJSON unmarshals from JSON.

type BlobTx

type BlobTx struct {
	ChainID    *uint256.Int
	Nonce      uint64
	GasTipCap  *uint256.Int // a.k.a. maxPriorityFeePerGas
	GasFeeCap  *uint256.Int // a.k.a. maxFeePerGas
	Gas        uint64
	To         common.Address
	Value      *uint256.Int
	Data       []byte
	AccessList AccessList
	BlobFeeCap *uint256.Int // a.k.a. maxFeePerBlobGas
	BlobHashes []common.Hash

	// A blob transaction can optionally contain blobs. This field must be set when BlobTx
	// is used to create a transaction for signing.
	Sidecar *BlobTxSidecar `rlp:"-"`

	// Signature values
	V *uint256.Int `json:"v" gencodec:"required"`
	R *uint256.Int `json:"r" gencodec:"required"`
	S *uint256.Int `json:"s" gencodec:"required"`
}

BlobTx represents an EIP-4844 transaction.

type BlobTxSidecar

type BlobTxSidecar struct {
	Blobs       []kzg4844.Blob       // Blobs needed by the blob pool
	Commitments []kzg4844.Commitment // Commitments needed by the blob pool
	Proofs      []kzg4844.Proof      // Proofs needed by the blob pool
}

BlobTxSidecar contains the blobs of a blob transaction.

func (*BlobTxSidecar) BlobHashes

func (sc *BlobTxSidecar) BlobHashes() []common.Hash

BlobHashes computes the blob hashes of the given blobs.

type Block

type Block struct {

	// These fields are used by package eth to track
	// inter-peer block relay.
	ReceivedAt   time.Time
	ReceivedFrom interface{}
	// contains filtered or unexported fields
}

Block represents an Ethereum block.

Note the Block type tries to be 'immutable', and contains certain caches that rely on that. The rules around block immutability are as follows:

  • We copy all data when the block is constructed. This makes references held inside the block independent of whatever value was passed in.

  • We copy all header data on access. This is because any change to the header would mess up the cached hash and size values in the block. Calling code is expected to take advantage of this to avoid over-allocating!

  • When new body data is attached to the block, a shallow copy of the block is returned. This ensures block modifications are race-free.

  • We do not copy body data on access because it does not affect the caches, and also because it would be too expensive.

func NewBlock

func NewBlock(header *Header, txs []*Transaction, uncles []*Header, receipts []*Receipt, hasher TrieHasher) *Block

NewBlock creates a new block. The input data is copied, changes to header and to the field values will not affect the block.

The values of TxHash, UncleHash, ReceiptHash and Bloom in header are ignored and set to values derived from the given txs, uncles and receipts.

func NewBlockWithHeader

func NewBlockWithHeader(header *Header) *Block

NewBlockWithHeader creates a block with the given header data. The header data is copied, changes to header and to the field values will not affect the block.

func NewBlockWithWithdrawals

func NewBlockWithWithdrawals(header *Header, txs []*Transaction, uncles []*Header, receipts []*Receipt, withdrawals []*Withdrawal, hasher TrieHasher) *Block

NewBlockWithWithdrawals creates a new block with withdrawals. The input data is copied, changes to header and to the field values will not affect the block.

The values of TxHash, UncleHash, ReceiptHash and Bloom in header are ignored and set to values derived from the given txs, uncles and receipts.

func (*Block) BaseFee

func (b *Block) BaseFee() *big.Int

func (*Block) BeaconRoot

func (b *Block) BeaconRoot() *common.Hash

func (*Block) BlobGasUsed

func (b *Block) BlobGasUsed() *uint64

func (*Block) Bloom

func (b *Block) Bloom() Bloom

func (*Block) Body

func (b *Block) Body() *Body

Body returns the non-header content of the block. Note the returned data is not an independent copy.

func (*Block) Coinbase

func (b *Block) Coinbase() common.Address

func (*Block) DecodeRLP

func (b *Block) DecodeRLP(s *rlp.Stream) error

DecodeRLP decodes a block from RLP.

func (*Block) Difficulty

func (b *Block) Difficulty() *big.Int

func (*Block) EncodeRLP

func (b *Block) EncodeRLP(w io.Writer) error

EncodeRLP serializes a block as RLP.

func (*Block) ExcessBlobGas

func (b *Block) ExcessBlobGas() *uint64

func (*Block) Extra

func (b *Block) Extra() []byte

func (*Block) GasLimit

func (b *Block) GasLimit() uint64

func (*Block) GasUsed

func (b *Block) GasUsed() uint64

func (*Block) Hash

func (b *Block) Hash() common.Hash

Hash returns the keccak256 hash of b's header. The hash is computed on the first call and cached thereafter.

func (*Block) Header

func (b *Block) Header() *Header

Header returns the block header (as a copy).

func (*Block) MixDigest

func (b *Block) MixDigest() common.Hash

func (*Block) Nonce

func (b *Block) Nonce() uint64

func (*Block) Number

func (b *Block) Number() *big.Int

func (*Block) NumberU64

func (b *Block) NumberU64() uint64

func (*Block) ParentHash

func (b *Block) ParentHash() common.Hash

func (*Block) ReceiptHash

func (b *Block) ReceiptHash() common.Hash

func (*Block) Root

func (b *Block) Root() common.Hash

func (*Block) SanityCheck

func (b *Block) SanityCheck() error

SanityCheck can be used to prevent that unbounded fields are stuffed with junk data to add processing overhead

func (*Block) Size

func (b *Block) Size() uint64

Size returns the true RLP encoded storage size of the block, either by encoding and returning it, or returning a previously cached value.

func (*Block) Time

func (b *Block) Time() uint64

func (*Block) Transaction

func (b *Block) Transaction(hash common.Hash) *Transaction

func (*Block) Transactions

func (b *Block) Transactions() Transactions

func (*Block) TxHash

func (b *Block) TxHash() common.Hash

func (*Block) UncleHash

func (b *Block) UncleHash() common.Hash

func (*Block) Uncles

func (b *Block) Uncles() []*Header

func (*Block) WithBody

func (b *Block) WithBody(transactions []*Transaction, uncles []*Header) *Block

WithBody returns a copy of the block with the given transaction and uncle contents.

func (*Block) WithSeal

func (b *Block) WithSeal(header *Header) *Block

WithSeal returns a new block with the data from b but the header replaced with the sealed one.

func (*Block) WithWithdrawals

func (b *Block) WithWithdrawals(withdrawals []*Withdrawal) *Block

WithWithdrawals returns a copy of the block containing the given withdrawals.

func (*Block) Withdrawals

func (b *Block) Withdrawals() Withdrawals

type BlockNonce

type BlockNonce [8]byte

A BlockNonce is a 64-bit hash which proves (combined with the mix-hash) that a sufficient amount of computation has been carried out on a block.

func EncodeNonce

func EncodeNonce(i uint64) BlockNonce

EncodeNonce converts the given integer to a block nonce.

func (BlockNonce) MarshalText

func (n BlockNonce) MarshalText() ([]byte, error)

MarshalText encodes n as a hex string with 0x prefix.

func (BlockNonce) Uint64

func (n BlockNonce) Uint64() uint64

Uint64 returns the integer value of a block nonce.

func (*BlockNonce) UnmarshalText

func (n *BlockNonce) UnmarshalText(input []byte) error

UnmarshalText implements encoding.TextUnmarshaler.

type Blocks

type Blocks []*Block

type Bloom

type Bloom [BloomByteLength]byte

Bloom represents a 2048 bit bloom filter.

func BytesToBloom

func BytesToBloom(b []byte) Bloom

BytesToBloom converts a byte slice to a bloom filter. It panics if b is not of suitable size.

func CreateBloom

func CreateBloom(receipts Receipts) Bloom

CreateBloom creates a bloom filter out of the give Receipts (+Logs)

func (*Bloom) Add

func (b *Bloom) Add(d []byte)

Add adds d to the filter. Future calls of Test(d) will return true.

func (Bloom) Big

func (b Bloom) Big() *big.Int

Big converts b to a big integer. Note: Converting a bloom filter to a big.Int and then calling GetBytes does not return the same bytes, since big.Int will trim leading zeroes

func (Bloom) Bytes

func (b Bloom) Bytes() []byte

Bytes returns the backing byte slice of the bloom

func (Bloom) MarshalText

func (b Bloom) MarshalText() ([]byte, error)

MarshalText encodes b as a hex string with 0x prefix.

func (*Bloom) SetBytes

func (b *Bloom) SetBytes(d []byte)

SetBytes sets the content of b to the given bytes. It panics if d is not of suitable size.

func (Bloom) Test

func (b Bloom) Test(topic []byte) bool

Test checks if the given topic is present in the bloom filter

func (*Bloom) UnmarshalText

func (b *Bloom) UnmarshalText(input []byte) error

UnmarshalText b as a hex string with 0x prefix.

type Body

type Body struct {
	Transactions []*Transaction
	Uncles       []*Header
	Withdrawals  []*Withdrawal `rlp:"optional"`
}

Body is a simple (mutable, non-safe) data container for storing and moving a block's data contents (transactions and uncles) together.

type DepositTx

type DepositTx struct {
	// SourceHash uniquely identifies the source of the deposit
	SourceHash common.Hash
	// From is exposed through the types.Signer, not through TxData
	From common.Address
	// nil means contract creation
	To *common.Address `rlp:"nil"`
	// Mint is minted on L2, locked on L1, nil if no minting.
	Mint *big.Int `rlp:"nil"`
	// Value is transferred from L2 balance, executed after Mint (if any)
	Value *big.Int
	// gas limit
	Gas uint64
	// Field indicating if this transaction is exempt from the L2 gas limit.
	IsSystemTransaction bool
	// Normal Tx data
	Data []byte
}

type DerivableList

type DerivableList interface {
	Len() int
	EncodeIndex(int, *bytes.Buffer)
}

DerivableList is the input to DeriveSha. It is implemented by the 'Transactions' and 'Receipts' types. This is internal, do not use these methods.

type DynamicFeeTx

type DynamicFeeTx struct {
	ChainID    *big.Int
	Nonce      uint64
	GasTipCap  *big.Int // a.k.a. maxPriorityFeePerGas
	GasFeeCap  *big.Int // a.k.a. maxFeePerGas
	Gas        uint64
	To         *common.Address `rlp:"nil"` // nil means contract creation
	Value      *big.Int
	Data       []byte
	AccessList AccessList

	// Signature values
	V *big.Int `json:"v" gencodec:"required"`
	R *big.Int `json:"r" gencodec:"required"`
	S *big.Int `json:"s" gencodec:"required"`
}

DynamicFeeTx represents an EIP-1559 transaction.

type EIP155Signer

type EIP155Signer struct {
	// contains filtered or unexported fields
}

EIP155Signer implements Signer using the EIP-155 rules. This accepts transactions which are replay-protected as well as unprotected homestead transactions.

func NewEIP155Signer

func NewEIP155Signer(chainId *big.Int) EIP155Signer

func (EIP155Signer) ChainID

func (s EIP155Signer) ChainID() *big.Int

func (EIP155Signer) Equal

func (s EIP155Signer) Equal(s2 Signer) bool

func (EIP155Signer) Hash

func (s EIP155Signer) Hash(tx *Transaction) common.Hash

Hash returns the hash to be signed by the sender. It does not uniquely identify the transaction.

func (EIP155Signer) Sender

func (s EIP155Signer) Sender(tx *Transaction) (common.Address, error)

func (EIP155Signer) SignatureValues

func (s EIP155Signer) SignatureValues(tx *Transaction, sig []byte) (R, S, V *big.Int, err error)

SignatureValues returns signature values. This signature needs to be in the [R || S || V] format where V is 0 or 1.

type FrontierSigner

type FrontierSigner struct{}

FrontierSigner implements Signer interface using the frontier rules.

func (FrontierSigner) ChainID

func (s FrontierSigner) ChainID() *big.Int

func (FrontierSigner) Equal

func (s FrontierSigner) Equal(s2 Signer) bool

func (FrontierSigner) Hash

func (fs FrontierSigner) Hash(tx *Transaction) common.Hash

Hash returns the hash to be signed by the sender. It does not uniquely identify the transaction.

func (FrontierSigner) Sender

func (fs FrontierSigner) Sender(tx *Transaction) (common.Address, error)

func (FrontierSigner) SignatureValues

func (fs FrontierSigner) SignatureValues(tx *Transaction, sig []byte) (r, s, v *big.Int, err error)

SignatureValues returns signature values. This signature needs to be in the [R || S || V] format where V is 0 or 1.

type GenesisAlloc

type GenesisAlloc map[common.Address]Account

GenesisAlloc specifies the initial state of a genesis block.

func (*GenesisAlloc) UnmarshalJSON

func (ga *GenesisAlloc) UnmarshalJSON(data []byte) error
type Header struct {
	ParentHash  common.Hash    `json:"parentHash"       gencodec:"required"`
	UncleHash   common.Hash    `json:"sha3Uncles"       gencodec:"required"`
	Coinbase    common.Address `json:"miner"`
	Root        common.Hash    `json:"stateRoot"        gencodec:"required"`
	TxHash      common.Hash    `json:"transactionsRoot" gencodec:"required"`
	ReceiptHash common.Hash    `json:"receiptsRoot"     gencodec:"required"`
	Bloom       Bloom          `json:"logsBloom"        gencodec:"required"`
	Difficulty  *big.Int       `json:"difficulty"       gencodec:"required"`
	Number      *big.Int       `json:"number"           gencodec:"required"`
	GasLimit    uint64         `json:"gasLimit"         gencodec:"required"`
	GasUsed     uint64         `json:"gasUsed"          gencodec:"required"`
	Time        uint64         `json:"timestamp"        gencodec:"required"`
	Extra       []byte         `json:"extraData"        gencodec:"required"`
	MixDigest   common.Hash    `json:"mixHash"`
	Nonce       BlockNonce     `json:"nonce"`

	// BaseFee was added by EIP-1559 and is ignored in legacy headers.
	BaseFee *big.Int `json:"baseFeePerGas" rlp:"optional"`

	// WithdrawalsHash was added by EIP-4895 and is ignored in legacy headers.
	WithdrawalsHash *common.Hash `json:"withdrawalsRoot" rlp:"optional"`

	// BlobGasUsed was added by EIP-4844 and is ignored in legacy headers.
	BlobGasUsed *uint64 `json:"blobGasUsed" rlp:"optional"`

	// ExcessBlobGas was added by EIP-4844 and is ignored in legacy headers.
	ExcessBlobGas *uint64 `json:"excessBlobGas" rlp:"optional"`

	// ParentBeaconRoot was added by EIP-4788 and is ignored in legacy headers.
	ParentBeaconRoot *common.Hash `json:"parentBeaconBlockRoot" rlp:"optional"`
}

Header represents a block header in the Ethereum blockchain.

func CopyHeader

func CopyHeader(h *Header) *Header

CopyHeader creates a deep copy of a block header.

func (*Header) EmptyBody

func (h *Header) EmptyBody() bool

EmptyBody returns true if there is no additional 'body' to complete the header that is: no transactions, no uncles and no withdrawals.

func (*Header) EmptyReceipts

func (h *Header) EmptyReceipts() bool

EmptyReceipts returns true if there are no receipts for this header/block.

func (*Header) EncodeRLP

func (obj *Header) EncodeRLP(_w io.Writer) error

func (*Header) Hash

func (h *Header) Hash() common.Hash

Hash returns the block hash of the header, which is simply the keccak256 hash of its RLP encoding.

func (Header) MarshalJSON

func (h Header) MarshalJSON() ([]byte, error)

MarshalJSON marshals as JSON.

func (*Header) SanityCheck

func (h *Header) SanityCheck() error

SanityCheck checks a few basic things -- these checks are way beyond what any 'sane' production values should hold, and can mainly be used to prevent that the unbounded fields are stuffed with junk data to add processing overhead

func (*Header) Size

func (h *Header) Size() common.StorageSize

Size returns the approximate memory used by all internal contents. It is used to approximate and limit the memory consumption of various caches.

func (*Header) UnmarshalJSON

func (h *Header) UnmarshalJSON(input []byte) error

UnmarshalJSON unmarshals from JSON.

type HomesteadSigner

type HomesteadSigner struct{ FrontierSigner }

HomesteadSigner implements Signer interface using the homestead rules.

func (HomesteadSigner) ChainID

func (s HomesteadSigner) ChainID() *big.Int

func (HomesteadSigner) Equal

func (s HomesteadSigner) Equal(s2 Signer) bool

func (HomesteadSigner) Sender

func (hs HomesteadSigner) Sender(tx *Transaction) (common.Address, error)

func (HomesteadSigner) SignatureValues

func (hs HomesteadSigner) SignatureValues(tx *Transaction, sig []byte) (r, s, v *big.Int, err error)

SignatureValues returns signature values. This signature needs to be in the [R || S || V] format where V is 0 or 1.

type L1CostFunc

type L1CostFunc func(rcd RollupCostData, blockTime uint64) *big.Int

L1CostFunc is used in the state transition to determine the data availability fee charged to the sender of non-Deposit transactions. It returns nil if no data availability fee is charged.

func NewL1CostFunc

func NewL1CostFunc(config *params.ChainConfig, statedb StateGetter) L1CostFunc

NewL1CostFunc returns a function used for calculating data availability fees, or nil if this is not an op-stack chain.

type LegacyOptimismStoredReceiptRLP

type LegacyOptimismStoredReceiptRLP struct {
	PostStateOrStatus []byte
	CumulativeGasUsed uint64
	Logs              []*LogForStorage
	L1GasUsed         *big.Int
	L1GasPrice        *big.Int
	L1Fee             *big.Int
	FeeScalar         string
}

LegacyOptimismStoredReceiptRLP is the pre bedrock storage encoding of a receipt. It will only exist in the database if it was migrated using the migration tool. Nodes that sync using snap-sync will not have any of these entries.

type LegacyTx

type LegacyTx struct {
	Nonce    uint64          // nonce of sender account
	GasPrice *big.Int        // wei per gas
	Gas      uint64          // gas limit
	To       *common.Address `rlp:"nil"` // nil means contract creation
	Value    *big.Int        // wei amount
	Data     []byte          // contract invocation input data
	V, R, S  *big.Int        // signature values
}

LegacyTx is the transaction data of the original Ethereum transactions.

type Log

type Log struct {
	// Consensus fields:
	// address of the contract that generated the event
	Address common.Address `json:"address" gencodec:"required"`
	// list of topics provided by the contract.
	Topics []common.Hash `json:"topics" gencodec:"required"`
	// supplied by the contract, usually ABI-encoded
	Data []byte `json:"data" gencodec:"required"`

	// Derived fields. These fields are filled in by the node
	// but not secured by consensus.
	// block in which the transaction was included
	BlockNumber uint64 `json:"blockNumber" rlp:"-"`
	// hash of the transaction
	TxHash common.Hash `json:"transactionHash" gencodec:"required" rlp:"-"`
	// index of the transaction in the block
	TxIndex uint `json:"transactionIndex" rlp:"-"`
	// hash of the block in which the transaction was included
	BlockHash common.Hash `json:"blockHash" rlp:"-"`
	// index of the log in the block
	Index uint `json:"logIndex" rlp:"-"`

	// The Removed field is true if this log was reverted due to a chain reorganisation.
	// You must pay attention to this field if you receive logs through a filter query.
	Removed bool `json:"removed" rlp:"-"`
}

Log represents a contract log event. These events are generated by the LOG opcode and stored/indexed by the node.

func (*Log) EncodeRLP

func (obj *Log) EncodeRLP(_w io.Writer) error

func (Log) MarshalJSON

func (l Log) MarshalJSON() ([]byte, error)

MarshalJSON marshals as JSON.

func (*Log) UnmarshalJSON

func (l *Log) UnmarshalJSON(input []byte) error

UnmarshalJSON unmarshals from JSON.

type LogForStorage

type LogForStorage Log

LogForStorage is a wrapper around a Log that handles backward compatibility with prior storage formats.

func (*LogForStorage) DecodeRLP

func (l *LogForStorage) DecodeRLP(s *rlp.Stream) error

DecodeRLP implements rlp.Decoder.

Note some redundant fields(e.g. block number, tx hash etc) will be assembled later.

func (*LogForStorage) EncodeRLP

func (l *LogForStorage) EncodeRLP(w io.Writer) error

EncodeRLP implements rlp.Encoder.

type Receipt

type Receipt struct {
	// Consensus fields: These fields are defined by the Yellow Paper
	Type              uint8  `json:"type,omitempty"`
	PostState         []byte `json:"root"`
	Status            uint64 `json:"status"`
	CumulativeGasUsed uint64 `json:"cumulativeGasUsed" gencodec:"required"`
	Bloom             Bloom  `json:"logsBloom"         gencodec:"required"`
	Logs              []*Log `json:"logs"              gencodec:"required"`

	// Implementation fields: These fields are added by geth when processing a transaction or retrieving a receipt.
	// gencodec annotated fields: these are stored in the chain database.
	TxHash            common.Hash    `json:"transactionHash" gencodec:"required"`
	ContractAddress   common.Address `json:"contractAddress"`
	GasUsed           uint64         `json:"gasUsed" gencodec:"required"`
	EffectiveGasPrice *big.Int       `json:"effectiveGasPrice"` // required, but tag omitted for backwards compatibility
	BlobGasUsed       uint64         `json:"blobGasUsed,omitempty"`
	BlobGasPrice      *big.Int       `json:"blobGasPrice,omitempty"`

	// DepositNonce was introduced in Regolith to store the actual nonce used by deposit transactions
	// The state transition process ensures this is only set for Regolith deposit transactions.
	DepositNonce *uint64 `json:"depositNonce,omitempty"`
	// DepositReceiptVersion was introduced in Canyon to indicate an update to how receipt hashes
	// should be computed when set. The state transition process ensures this is only set for
	// post-Canyon deposit transactions.
	DepositReceiptVersion *uint64 `json:"depositReceiptVersion,omitempty"`

	// Inclusion information: These fields provide information about the inclusion of the
	// transaction corresponding to this receipt.
	BlockHash        common.Hash `json:"blockHash,omitempty"`
	BlockNumber      *big.Int    `json:"blockNumber,omitempty"`
	TransactionIndex uint        `json:"transactionIndex"`

	// Optimism: extend receipts with L1 fee info
	L1GasPrice          *big.Int   `json:"l1GasPrice,omitempty"`          // Present from pre-bedrock. L1 Basefee after Bedrock
	L1BlobBaseFee       *big.Int   `json:"l1BlobBaseFee,omitempty"`       // Always nil prior to the Ecotone hardfork
	L1GasUsed           *big.Int   `json:"l1GasUsed,omitempty"`           // Present from pre-bedrock, deprecated as of Fjord
	L1Fee               *big.Int   `json:"l1Fee,omitempty"`               // Present from pre-bedrock
	FeeScalar           *big.Float `json:"l1FeeScalar,omitempty"`         // Present from pre-bedrock to Ecotone. Nil after Ecotone
	L1BaseFeeScalar     *uint64    `json:"l1BaseFeeScalar,omitempty"`     // Always nil prior to the Ecotone hardfork
	L1BlobBaseFeeScalar *uint64    `json:"l1BlobBaseFeeScalar,omitempty"` // Always nil prior to the Ecotone hardfork
}

Receipt represents the results of a transaction.

func NewReceipt

func NewReceipt(root []byte, failed bool, cumulativeGasUsed uint64) *Receipt

NewReceipt creates a barebone transaction receipt, copying the init fields. Deprecated: create receipts using a struct literal instead.

func (*Receipt) DecodeRLP

func (r *Receipt) DecodeRLP(s *rlp.Stream) error

DecodeRLP implements rlp.Decoder, and loads the consensus fields of a receipt from an RLP stream.

func (*Receipt) EncodeRLP

func (r *Receipt) EncodeRLP(w io.Writer) error

EncodeRLP implements rlp.Encoder, and flattens the consensus fields of a receipt into an RLP stream. If no post state is present, byzantium fork is assumed.

func (*Receipt) MarshalBinary

func (r *Receipt) MarshalBinary() ([]byte, error)

MarshalBinary returns the consensus encoding of the receipt.

func (Receipt) MarshalJSON

func (r Receipt) MarshalJSON() ([]byte, error)

MarshalJSON marshals as JSON.

func (*Receipt) Size

func (r *Receipt) Size() common.StorageSize

Size returns the approximate memory used by all internal contents. It is used to approximate and limit the memory consumption of various caches.

func (*Receipt) UnmarshalBinary

func (r *Receipt) UnmarshalBinary(b []byte) error

UnmarshalBinary decodes the consensus encoding of receipts. It supports legacy RLP receipts and EIP-2718 typed receipts.

func (*Receipt) UnmarshalJSON

func (r *Receipt) UnmarshalJSON(input []byte) error

UnmarshalJSON unmarshals from JSON.

type ReceiptForStorage

type ReceiptForStorage Receipt

ReceiptForStorage is a wrapper around a Receipt with RLP serialization that omits the Bloom field and deserialization that re-computes it.

func (*ReceiptForStorage) DecodeRLP

func (r *ReceiptForStorage) DecodeRLP(s *rlp.Stream) error

DecodeRLP implements rlp.Decoder, and loads both consensus and implementation fields of a receipt from an RLP stream.

func (*ReceiptForStorage) EncodeRLP

func (r *ReceiptForStorage) EncodeRLP(_w io.Writer) error

EncodeRLP implements rlp.Encoder, and flattens all content fields of a receipt into an RLP stream.

type Receipts

type Receipts []*Receipt

Receipts implements DerivableList for receipts.

func (Receipts) DeriveFields

func (rs Receipts) DeriveFields(config *params.ChainConfig, hash common.Hash, number uint64, time uint64, baseFee *big.Int, blobGasPrice *big.Int, txs []*Transaction) error

DeriveFields fills the receipts with their computed fields based on consensus data and contextual infos like containing block and transactions.

func (Receipts) EncodeIndex

func (rs Receipts) EncodeIndex(i int, w *bytes.Buffer)

EncodeIndex encodes the i'th receipt to w. For DepositTxType receipts with non-nil DepositNonce but nil DepositReceiptVersion, the output will differ than calling r.MarshalBinary(); this behavior difference should not be changed to preserve backwards compatibility of receipt-root hash computation.

func (Receipts) Len

func (rs Receipts) Len() int

Len returns the number of receipts in this list.

type RollupCostData

type RollupCostData struct {
	Zeroes, Ones uint64
	FastLzSize   uint64
}

RollupCostData is a transaction structure that caches data for quickly computing the data availability costs for the transaction.

func NewRollupCostData

func NewRollupCostData(data []byte) (out RollupCostData)

type Signer

type Signer interface {
	// Sender returns the sender address of the transaction.
	Sender(tx *Transaction) (common.Address, error)

	// SignatureValues returns the raw R, S, V values corresponding to the
	// given signature.
	SignatureValues(tx *Transaction, sig []byte) (r, s, v *big.Int, err error)
	ChainID() *big.Int

	// Hash returns 'signature hash', i.e. the transaction hash that is signed by the
	// private key. This hash does not uniquely identify the transaction.
	Hash(tx *Transaction) common.Hash

	// Equal returns true if the given signer is the same as the receiver.
	Equal(Signer) bool
}

Signer encapsulates transaction signature handling. The name of this type is slightly misleading because Signers don't actually sign, they're just for validating and processing of signatures.

Note that this interface is not a stable API and may change at any time to accommodate new protocol rules.

func LatestSigner

func LatestSigner(config *params.ChainConfig) Signer

LatestSigner returns the 'most permissive' Signer available for the given chain configuration. Specifically, this enables support of all types of transactions when their respective forks are scheduled to occur at any block number (or time) in the chain config.

Use this in transaction-handling code where the current block number is unknown. If you have the current block number available, use MakeSigner instead.

func LatestSignerForChainID

func LatestSignerForChainID(chainID *big.Int) Signer

LatestSignerForChainID returns the 'most permissive' Signer available. Specifically, this enables support for EIP-155 replay protection and all implemented EIP-2718 transaction types if chainID is non-nil.

Use this in transaction-handling code where the current block number and fork configuration are unknown. If you have a ChainConfig, use LatestSigner instead. If you have a ChainConfig and know the current block number, use MakeSigner instead.

func MakeSigner

func MakeSigner(config *params.ChainConfig, blockNumber *big.Int, blockTime uint64) Signer

MakeSigner returns a Signer based on the given chain config and block number.

func NewCancunSigner

func NewCancunSigner(chainId *big.Int) Signer

NewCancunSigner returns a signer that accepts - EIP-4844 blob transactions - EIP-1559 dynamic fee transactions - EIP-2930 access list transactions, - EIP-155 replay protected transactions, and - legacy Homestead transactions.

func NewEIP2930Signer

func NewEIP2930Signer(chainId *big.Int) Signer

NewEIP2930Signer returns a signer that accepts EIP-2930 access list transactions, EIP-155 replay protected transactions, and legacy Homestead transactions.

func NewLondonSigner

func NewLondonSigner(chainId *big.Int) Signer

NewLondonSigner returns a signer that accepts - EIP-1559 dynamic fee transactions - EIP-2930 access list transactions, - EIP-155 replay protected transactions, and - legacy Homestead transactions.

type SlimAccount

type SlimAccount struct {
	Nonce    uint64
	Balance  *uint256.Int
	Root     []byte // Nil if root equals to types.EmptyRootHash
	CodeHash []byte // Nil if hash equals to types.EmptyCodeHash
}

SlimAccount is a modified version of an Account, where the root is replaced with a byte slice. This format can be used to represent full-consensus format or slim format which replaces the empty root and code hash as nil byte slice.

type StateAccount

type StateAccount struct {
	Nonce    uint64
	Balance  *uint256.Int
	Root     common.Hash // merkle root of the storage trie
	CodeHash []byte
}

StateAccount is the Ethereum consensus representation of accounts. These objects are stored in the main account trie.

func FullAccount

func FullAccount(data []byte) (*StateAccount, error)

FullAccount decodes the data on the 'slim RLP' format and returns the consensus format account.

func NewEmptyStateAccount

func NewEmptyStateAccount() *StateAccount

NewEmptyStateAccount constructs an empty state account.

func (*StateAccount) Copy

func (acct *StateAccount) Copy() *StateAccount

Copy returns a deep-copied state account object.

func (*StateAccount) EncodeRLP

func (obj *StateAccount) EncodeRLP(_w io.Writer) error

type StateGetter

type StateGetter interface {
	GetState(common.Address, common.Hash) common.Hash
}

type Transaction

type Transaction struct {
	// contains filtered or unexported fields
}

Transaction is an Ethereum transaction.

func MustSignNewTx

func MustSignNewTx(prv *ecdsa.PrivateKey, s Signer, txdata TxData) *Transaction

MustSignNewTx creates a transaction and signs it. This panics if the transaction cannot be signed.

func NewContractCreation

func NewContractCreation(nonce uint64, amount *big.Int, gasLimit uint64, gasPrice *big.Int, data []byte) *Transaction

NewContractCreation creates an unsigned legacy transaction. Deprecated: use NewTx instead.

func NewTransaction

func NewTransaction(nonce uint64, to common.Address, amount *big.Int, gasLimit uint64, gasPrice *big.Int, data []byte) *Transaction

NewTransaction creates an unsigned legacy transaction. Deprecated: use NewTx instead.

func NewTx

func NewTx(inner TxData) *Transaction

NewTx creates a new transaction.

func SignNewTx

func SignNewTx(prv *ecdsa.PrivateKey, s Signer, txdata TxData) (*Transaction, error)

SignNewTx creates a transaction and signs it.

func SignTx

func SignTx(tx *Transaction, s Signer, prv *ecdsa.PrivateKey) (*Transaction, error)

SignTx signs the transaction using the given signer and private key.

func (*Transaction) AccessList

func (tx *Transaction) AccessList() AccessList

AccessList returns the access list of the transaction.

func (*Transaction) BlobGas

func (tx *Transaction) BlobGas() uint64

BlobGas returns the blob gas limit of the transaction for blob transactions, 0 otherwise.

func (*Transaction) BlobGasFeeCap

func (tx *Transaction) BlobGasFeeCap() *big.Int

BlobGasFeeCap returns the blob gas fee cap per blob gas of the transaction for blob transactions, nil otherwise.

func (*Transaction) BlobGasFeeCapCmp

func (tx *Transaction) BlobGasFeeCapCmp(other *Transaction) int

BlobGasFeeCapCmp compares the blob fee cap of two transactions.

func (*Transaction) BlobGasFeeCapIntCmp

func (tx *Transaction) BlobGasFeeCapIntCmp(other *big.Int) int

BlobGasFeeCapIntCmp compares the blob fee cap of the transaction against the given blob fee cap.

func (*Transaction) BlobHashes

func (tx *Transaction) BlobHashes() []common.Hash

BlobHashes returns the hashes of the blob commitments for blob transactions, nil otherwise.

func (*Transaction) BlobTxSidecar

func (tx *Transaction) BlobTxSidecar() *BlobTxSidecar

BlobTxSidecar returns the sidecar of a blob transaction, nil otherwise.

func (*Transaction) ChainId

func (tx *Transaction) ChainId() *big.Int

ChainId returns the EIP155 chain ID of the transaction. The return value will always be non-nil. For legacy transactions which are not replay-protected, the return value is zero.

func (*Transaction) Cost

func (tx *Transaction) Cost() *big.Int

Cost returns (gas * gasPrice) + (blobGas * blobGasPrice) + value.

func (*Transaction) Data

func (tx *Transaction) Data() []byte

Data returns the input data of the transaction.

func (*Transaction) DecodeRLP

func (tx *Transaction) DecodeRLP(s *rlp.Stream) error

DecodeRLP implements rlp.Decoder

func (*Transaction) EffectiveGasTip

func (tx *Transaction) EffectiveGasTip(baseFee *big.Int) (*big.Int, error)

EffectiveGasTip returns the effective miner gasTipCap for the given base fee. Note: if the effective gasTipCap is negative, this method returns both error the actual negative value, _and_ ErrGasFeeCapTooLow

func (*Transaction) EffectiveGasTipCmp

func (tx *Transaction) EffectiveGasTipCmp(other *Transaction, baseFee *big.Int) int

EffectiveGasTipCmp compares the effective gasTipCap of two transactions assuming the given base fee.

func (*Transaction) EffectiveGasTipIntCmp

func (tx *Transaction) EffectiveGasTipIntCmp(other *big.Int, baseFee *big.Int) int

EffectiveGasTipIntCmp compares the effective gasTipCap of a transaction to the given gasTipCap.

func (*Transaction) EffectiveGasTipValue

func (tx *Transaction) EffectiveGasTipValue(baseFee *big.Int) *big.Int

EffectiveGasTipValue is identical to EffectiveGasTip, but does not return an error in case the effective gasTipCap is negative

func (*Transaction) EffectiveNonce

func (tx *Transaction) EffectiveNonce() *uint64

EffectiveNonce returns the nonce that was actually used as part of transaction execution Returns nil if the effective nonce is not known

func (*Transaction) EncodeRLP

func (tx *Transaction) EncodeRLP(w io.Writer) error

EncodeRLP implements rlp.Encoder

func (*Transaction) Gas

func (tx *Transaction) Gas() uint64

Gas returns the gas limit of the transaction.

func (*Transaction) GasFeeCap

func (tx *Transaction) GasFeeCap() *big.Int

GasFeeCap returns the fee cap per gas of the transaction.

func (*Transaction) GasFeeCapCmp

func (tx *Transaction) GasFeeCapCmp(other *Transaction) int

GasFeeCapCmp compares the fee cap of two transactions.

func (*Transaction) GasFeeCapIntCmp

func (tx *Transaction) GasFeeCapIntCmp(other *big.Int) int

GasFeeCapIntCmp compares the fee cap of the transaction against the given fee cap.

func (*Transaction) GasPrice

func (tx *Transaction) GasPrice() *big.Int

GasPrice returns the gas price of the transaction.

func (*Transaction) GasTipCap

func (tx *Transaction) GasTipCap() *big.Int

GasTipCap returns the gasTipCap per gas of the transaction.

func (*Transaction) GasTipCapCmp

func (tx *Transaction) GasTipCapCmp(other *Transaction) int

GasTipCapCmp compares the gasTipCap of two transactions.

func (*Transaction) GasTipCapIntCmp

func (tx *Transaction) GasTipCapIntCmp(other *big.Int) int

GasTipCapIntCmp compares the gasTipCap of the transaction against the given gasTipCap.

func (*Transaction) Hash

func (tx *Transaction) Hash() common.Hash

Hash returns the transaction hash.

func (*Transaction) IsDepositTx

func (tx *Transaction) IsDepositTx() bool

IsDepositTx returns true if the transaction is a deposit tx type.

func (*Transaction) IsSystemTx

func (tx *Transaction) IsSystemTx() bool

IsSystemTx returns true for deposits that are system transactions. These transactions are executed in an unmetered environment & do not contribute to the block gas limit.

func (*Transaction) MarshalBinary

func (tx *Transaction) MarshalBinary() ([]byte, error)

MarshalBinary returns the canonical encoding of the transaction. For legacy transactions, it returns the RLP encoding. For EIP-2718 typed transactions, it returns the type and payload.

func (*Transaction) MarshalJSON

func (tx *Transaction) MarshalJSON() ([]byte, error)

MarshalJSON marshals as JSON with a hash.

func (*Transaction) Mint

func (tx *Transaction) Mint() *big.Int

Mint returns the ETH to mint in the deposit tx. This returns nil if there is nothing to mint, or if this is not a deposit tx.

func (*Transaction) Nonce

func (tx *Transaction) Nonce() uint64

Nonce returns the sender account nonce of the transaction.

func (*Transaction) Protected

func (tx *Transaction) Protected() bool

Protected says whether the transaction is replay-protected.

func (*Transaction) RawSignatureValues

func (tx *Transaction) RawSignatureValues() (v, r, s *big.Int)

RawSignatureValues returns the V, R, S signature values of the transaction. The return values should not be modified by the caller. The return values may be nil or zero, if the transaction is unsigned.

func (*Transaction) RollupCostData

func (tx *Transaction) RollupCostData() RollupCostData

RollupCostData caches the information needed to efficiently compute the data availability fee

func (*Transaction) SetBlobTxSidecar

func (tx *Transaction) SetBlobTxSidecar(sidecar *BlobTxSidecar) error

SetBlobTxSidecar sets the sidecar of a transaction. The sidecar should match the blob-tx versioned hashes, or the transaction will be invalid. This allows tools to easily re-attach blob sidecars to signed transactions that omit the sidecar.

func (*Transaction) SetTime

func (tx *Transaction) SetTime(t time.Time)

SetTime sets the decoding time of a transaction. This is used by tests to set arbitrary times and by persistent transaction pools when loading old txs from disk.

func (*Transaction) Size

func (tx *Transaction) Size() uint64

Size returns the true encoded storage size of the transaction, either by encoding and returning it, or returning a previously cached value.

func (*Transaction) SourceHash

func (tx *Transaction) SourceHash() common.Hash

SourceHash returns the hash that uniquely identifies the source of the deposit tx, e.g. a user deposit event, or a L1 info deposit included in a specific L2 block height. Non-deposit transactions return a zeroed hash.

func (*Transaction) Time

func (tx *Transaction) Time() time.Time

Time returns the time when the transaction was first seen on the network. It is a heuristic to prefer mining older txs vs new all other things equal.

func (*Transaction) To

func (tx *Transaction) To() *common.Address

To returns the recipient address of the transaction. For contract-creation transactions, To returns nil.

func (*Transaction) Type

func (tx *Transaction) Type() uint8

Type returns the transaction type.

func (*Transaction) UnmarshalBinary

func (tx *Transaction) UnmarshalBinary(b []byte) error

UnmarshalBinary decodes the canonical encoding of transactions. It supports legacy RLP transactions and EIP-2718 typed transactions.

func (*Transaction) UnmarshalJSON

func (tx *Transaction) UnmarshalJSON(input []byte) error

UnmarshalJSON unmarshals from JSON.

func (*Transaction) Value

func (tx *Transaction) Value() *big.Int

Value returns the ether amount of the transaction.

func (*Transaction) WithSignature

func (tx *Transaction) WithSignature(signer Signer, sig []byte) (*Transaction, error)

WithSignature returns a new transaction with the given signature. This signature needs to be in the [R || S || V] format where V is 0 or 1.

func (*Transaction) WithoutBlobTxSidecar

func (tx *Transaction) WithoutBlobTxSidecar() *Transaction

WithoutBlobTxSidecar returns a copy of tx with the blob sidecar removed.

type Transactions

type Transactions []*Transaction

Transactions implements DerivableList for transactions.

func TxDifference

func TxDifference(a, b Transactions) Transactions

TxDifference returns a new set which is the difference between a and b.

func (Transactions) EncodeIndex

func (s Transactions) EncodeIndex(i int, w *bytes.Buffer)

EncodeIndex encodes the i'th transaction to w. Note that this does not check for errors because we assume that *Transaction will only ever contain valid txs that were either constructed by decoding or via public API in this package.

func (Transactions) Len

func (s Transactions) Len() int

Len returns the length of s.

type TrieHasher

type TrieHasher interface {
	Reset()
	Update([]byte, []byte) error
	Hash() common.Hash
}

TrieHasher is the tool used to calculate the hash of derivable list. This is internal, do not use.

type TxByNonce

type TxByNonce Transactions

TxByNonce implements the sort interface to allow sorting a list of transactions by their nonces. This is usually only useful for sorting transactions from a single account, otherwise a nonce comparison doesn't make much sense.

func (TxByNonce) Len

func (s TxByNonce) Len() int

func (TxByNonce) Less

func (s TxByNonce) Less(i, j int) bool

func (TxByNonce) Swap

func (s TxByNonce) Swap(i, j int)

type TxData

type TxData interface {
	// contains filtered or unexported methods
}

TxData is the underlying data of a transaction.

This is implemented by DynamicFeeTx, LegacyTx and AccessListTx.

type Withdrawal

type Withdrawal struct {
	Index     uint64         `json:"index"`          // monotonically increasing identifier issued by consensus layer
	Validator uint64         `json:"validatorIndex"` // index of validator associated with withdrawal
	Address   common.Address `json:"address"`        // target address for withdrawn ether
	Amount    uint64         `json:"amount"`         // value of withdrawal in Gwei
}

Withdrawal represents a validator withdrawal from the consensus layer.

func (*Withdrawal) EncodeRLP

func (obj *Withdrawal) EncodeRLP(_w io.Writer) error

func (Withdrawal) MarshalJSON

func (w Withdrawal) MarshalJSON() ([]byte, error)

MarshalJSON marshals as JSON.

func (*Withdrawal) UnmarshalJSON

func (w *Withdrawal) UnmarshalJSON(input []byte) error

UnmarshalJSON unmarshals from JSON.

type Withdrawals

type Withdrawals []*Withdrawal

Withdrawals implements DerivableList for withdrawals.

func (Withdrawals) EncodeIndex

func (s Withdrawals) EncodeIndex(i int, w *bytes.Buffer)

EncodeIndex encodes the i'th withdrawal to w. Note that this does not check for errors because we assume that *Withdrawal will only ever contain valid withdrawals that were either constructed by decoding or via public API in this package.

func (Withdrawals) Len

func (s Withdrawals) Len() int

Len returns the length of s.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL