Version: v0.14.11 Latest Latest

This package is not in the latest version of its module.

Go to latest
Published: Apr 26, 2021 License: MPL-2.0 Imports: 46 Imported by: 0




View Source
const EnvLogPathMask = "TF_LOG_PATH_MASK"

Set to a file mask in sprintf format where %s is test name

View Source
const TestEnvVar = "TF_ACC"
View Source
const UniqueIDSuffixLength = 26

UniqueIDSuffixLength is the string length of the suffix generated by PrefixedUniqueId. This can be used by length validation functions to ensure prefixes are the correct length for the target field.

View Source
const UniqueIdPrefix = `terraform-`


This section is empty.


func AddTestSweepers added in v0.9.7

func AddTestSweepers(name string, s *Sweeper)

AddTestSweepers function adds a given name and Sweeper configuration pair to the internal sweeperFuncs map. Invoke this function to register a resource sweeper to be available for running when the -sweep flag is used with `go test`. Sweeper names must be unique to help ensure a given sweeper is only ran once per run.

func GRPCTestProvider added in v0.12.0

func GRPCTestProvider(rp terraform.ResourceProvider) providers.Interface

GRPCTestProvider takes a legacy ResourceProvider, wraps it in the new GRPC shim and starts it in a grpc server using an inmem connection. It returns a GRPCClient for this new server to test the shimmed resource provider.

func LogOutput added in v0.10.8

func LogOutput(t TestT) (logOutput io.Writer, err error)

func ParallelTest added in v0.11.9

func ParallelTest(t TestT, c TestCase)

ParallelTest performs an acceptance test on a resource, allowing concurrency with other ParallelTest.

Tests will fail if they do not properly handle conditions to allow multiple tests to occur against the same resource or service (e.g. random naming). All other requirements of the Test function also apply to this function.

func PrefixedUniqueId added in v0.6.2

func PrefixedUniqueId(prefix string) string

Helper for a resource to generate a unique identifier w/ given prefix

After the prefix, the ID consists of an incrementing 26 digit value (to match previous timestamp output). After the prefix, the ID consists of a timestamp and an incrementing 8 hex digit value The timestamp means that multiple IDs created with the same prefix will sort in the order of their creation, even across multiple terraform executions, as long as the clock is not turned back between calls, and as long as any given terraform execution generates fewer than 4 billion IDs.

func Retry added in v0.3.0

func Retry(timeout time.Duration, f RetryFunc) error

Retry is a basic wrapper around StateChangeConf that will just retry a function until it no longer returns an error.

func Test

func Test(t TestT, c TestCase)

Test performs an acceptance test on a resource.

Tests are not run unless an environmental variable "TF_ACC" is set to some non-empty value. This is to avoid test cases surprising a user by creating real resources.

Tests will fail unless the verbose flag (`go test -v`, or explicitly the "-test.v" flag) is set. Because some acceptance tests take quite long, we require the verbose flag so users are able to see progress output.

func TestMain added in v0.9.7

func TestMain(m *testing.M)

func UniqueId added in v0.5.0

func UniqueId() string

Helper for a resource to generate a unique identifier w/ default prefix

func UnitTest added in v0.6.14

func UnitTest(t TestT, c TestCase)

UnitTest is a helper to force the acceptance testing harness to run in the normal unit test suite. This should only be used for resource that don't have any external dependencies.


type ImportStateCheckFunc added in v0.7.0

type ImportStateCheckFunc func([]*terraform.InstanceState) error

ImportStateCheckFunc is the check function for ImportState tests

type ImportStateIdFunc added in v0.10.5

type ImportStateIdFunc func(*terraform.State) (string, error)

ImportStateIdFunc is an ID generation function to help with complex ID generation for ImportState tests.

type NotFoundError added in v0.6.14

type NotFoundError struct {
	LastError    error
	LastRequest  interface{}
	LastResponse interface{}
	Message      string
	Retries      int

func (*NotFoundError) Error added in v0.6.14

func (e *NotFoundError) Error() string

type RetryError added in v0.3.1

type RetryError struct {
	Err       error
	Retryable bool

RetryError is the required return type of RetryFunc. It forces client code to choose whether or not a given error is retryable.

func NonRetryableError added in v0.6.13

func NonRetryableError(err error) *RetryError

NonRetryableError is a helper to create a RetryError that's _not_ retryable from a given error.

func RetryableError added in v0.6.13

func RetryableError(err error) *RetryError

RetryableError is a helper to create a RetryError that's retryable from a given error.

type RetryFunc added in v0.3.0

type RetryFunc func() *RetryError

RetryFunc is the function retried until it succeeds.

type StateChangeConf

type StateChangeConf struct {
	Delay          time.Duration    // Wait this time before starting checks
	Pending        []string         // States that are "allowed" and will continue trying
	Refresh        StateRefreshFunc // Refreshes the current state
	Target         []string         // Target state
	Timeout        time.Duration    // The amount of time to wait before timeout
	MinTimeout     time.Duration    // Smallest time to wait before refreshes
	PollInterval   time.Duration    // Override MinTimeout/backoff and only poll this often
	NotFoundChecks int              // Number of times to allow not found

	// This is to work around inconsistent APIs
	ContinuousTargetOccurence int // Number of times the Target state has to occur continuously

StateChangeConf is the configuration struct used for `WaitForState`.

func (*StateChangeConf) WaitForState

func (conf *StateChangeConf) WaitForState() (interface{}, error)

WaitForState watches an object and waits for it to achieve the state specified in the configuration using the specified Refresh() func, waiting the number of seconds specified in the timeout configuration.

If the Refresh function returns an error, exit immediately with that error.

If the Refresh function returns a state other than the Target state or one listed in Pending, return immediately with an error.

If the Timeout is exceeded before reaching the Target state, return an error.

Otherwise, the result is the result of the first call to the Refresh function to reach the target state.

type StateRefreshFunc

type StateRefreshFunc func() (result interface{}, state string, err error)

StateRefreshFunc is a function type used for StateChangeConf that is responsible for refreshing the item being watched for a state change.

It returns three results. `result` is any object that will be returned as the final object after waiting for state change. This allows you to return the final updated object, for example an EC2 instance after refreshing it.

`state` is the latest state of that object. And `err` is any error that may have happened while refreshing the state.

type Sweeper added in v0.9.7

type Sweeper struct {
	// Name for sweeper. Must be unique to be ran by the Sweeper Runner
	Name string

	// Dependencies list the const names of other Sweeper functions that must be ran
	// prior to running this Sweeper. This is an ordered list that will be invoked
	// recursively at the helper/resource level
	Dependencies []string

	// Sweeper function that when invoked sweeps the Provider of specific
	// resources
	F SweeperFunc

type SweeperFunc added in v0.9.7

type SweeperFunc func(r string) error

type SweeperFunc is a signature for a function that acts as a sweeper. It accepts a string for the region that the sweeper is to be ran in. This function must be able to construct a valid client for that region.

type TestCase

type TestCase struct {
	// IsUnitTest allows a test to run regardless of the TF_ACC
	// environment variable. This should be used with care - only for
	// fast tests on local resources (e.g. remote state with a local
	// backend) but can be used to increase confidence in correct
	// operation of Terraform without waiting for a full acctest run.
	IsUnitTest bool

	// PreCheck, if non-nil, will be called before any test steps are
	// executed. It will only be executed in the case that the steps
	// would run, so it can be used for some validation before running
	// acceptance tests, such as verifying that keys are setup.
	PreCheck func()

	// Providers is the ResourceProvider that will be under test.
	// Alternately, ProviderFactories can be specified for the providers
	// that are valid. This takes priority over Providers.
	// The end effect of each is the same: specifying the providers that
	// are used within the tests.
	Providers         map[string]terraform.ResourceProvider
	ProviderFactories map[string]terraform.ResourceProviderFactory

	// PreventPostDestroyRefresh can be set to true for cases where data sources
	// are tested alongside real resources
	PreventPostDestroyRefresh bool

	// CheckDestroy is called after the resource is finally destroyed
	// to allow the tester to test that the resource is truly gone.
	CheckDestroy TestCheckFunc

	// Steps are the apply sequences done within the context of the
	// same state. Each step can have its own check to verify correctness.
	Steps []TestStep

	// The settings below control the "ID-only refresh test." This is
	// an enabled-by-default test that tests that a refresh can be
	// refreshed with only an ID to result in the same attributes.
	// This validates completeness of Refresh.
	// IDRefreshName is the name of the resource to check. This will
	// default to the first non-nil primary resource in the state.
	// IDRefreshIgnore is a list of configuration keys that will be ignored.
	IDRefreshName   string
	IDRefreshIgnore []string

TestCase is a single acceptance test case used to test the apply/destroy lifecycle of a resource in a specific configuration.

When the destroy plan is executed, the config from the last TestStep is used to plan it.

type TestCheckFunc

type TestCheckFunc func(*terraform.State) error

TestCheckFunc is the callback type used with acceptance tests to check the state of a resource. The state passed in is the latest state known, or in the case of being after a destroy, it is the last known state when it was created.

func ComposeAggregateTestCheckFunc added in v0.7.1

func ComposeAggregateTestCheckFunc(fs ...TestCheckFunc) TestCheckFunc

ComposeAggregateTestCheckFunc lets you compose multiple TestCheckFuncs into a single TestCheckFunc.

As a user testing their provider, this lets you decompose your checks into smaller pieces more easily.

Unlike ComposeTestCheckFunc, ComposeAggergateTestCheckFunc runs _all_ of the TestCheckFuncs and aggregates failures.

func ComposeTestCheckFunc

func ComposeTestCheckFunc(fs ...TestCheckFunc) TestCheckFunc

ComposeTestCheckFunc lets you compose multiple TestCheckFuncs into a single TestCheckFunc.

As a user testing their provider, this lets you decompose your checks into smaller pieces more easily.

func TestCheckModuleNoResourceAttr added in v0.11.2

func TestCheckModuleNoResourceAttr(mp []string, name string, key string) TestCheckFunc

TestCheckModuleNoResourceAttr - as per TestCheckNoResourceAttr but with support for non-root modules

func TestCheckModuleResourceAttr added in v0.11.2

func TestCheckModuleResourceAttr(mp []string, name string, key string, value string) TestCheckFunc

TestCheckModuleResourceAttr - as per TestCheckResourceAttr but with support for non-root modules

func TestCheckModuleResourceAttrPair added in v0.11.2

func TestCheckModuleResourceAttrPair(mpFirst []string, nameFirst string, keyFirst string, mpSecond []string, nameSecond string, keySecond string) TestCheckFunc

TestCheckModuleResourceAttrPair - as per TestCheckResourceAttrPair but with support for non-root modules

func TestCheckModuleResourceAttrPtr added in v0.11.2

func TestCheckModuleResourceAttrPtr(mp []string, name string, key string, value *string) TestCheckFunc

TestCheckModuleResourceAttrPtr - as per TestCheckResourceAttrPtr but with support for non-root modules

func TestCheckModuleResourceAttrSet added in v0.11.2

func TestCheckModuleResourceAttrSet(mp []string, name string, key string) TestCheckFunc

TestCheckModuleResourceAttrSet - as per TestCheckResourceAttrSet but with support for non-root modules

func TestCheckNoResourceAttr added in v0.8.5

func TestCheckNoResourceAttr(name, key string) TestCheckFunc

TestCheckNoResourceAttr is a TestCheckFunc which ensures that NO value exists in state for the given name/key combination.

func TestCheckOutput added in v0.6.14

func TestCheckOutput(name, value string) TestCheckFunc

TestCheckOutput checks an output in the Terraform configuration

func TestCheckResourceAttr

func TestCheckResourceAttr(name, key, value string) TestCheckFunc

TestCheckResourceAttr is a TestCheckFunc which validates the value in state for the given name/key combination.

func TestCheckResourceAttrPair added in v0.8.7

func TestCheckResourceAttrPair(nameFirst, keyFirst, nameSecond, keySecond string) TestCheckFunc

TestCheckResourceAttrPair is a TestCheckFunc which validates that the values in state for a pair of name/key combinations are equal.

func TestCheckResourceAttrPtr added in v0.3.7

func TestCheckResourceAttrPtr(name string, key string, value *string) TestCheckFunc

TestCheckResourceAttrPtr is like TestCheckResourceAttr except the value is a pointer so that it can be updated while the test is running. It will only be dereferenced at the point this step is run.

func TestCheckResourceAttrSet added in v0.7.1

func TestCheckResourceAttrSet(name, key string) TestCheckFunc

TestCheckResourceAttrSet is a TestCheckFunc which ensures a value exists in state for the given name/key combination. It is useful when testing that computed values were set, when it is not possible to know ahead of time what the values will be.

func TestMatchOutput added in v0.7.0

func TestMatchOutput(name string, r *regexp.Regexp) TestCheckFunc

func TestMatchResourceAttr added in v0.6.1

func TestMatchResourceAttr(name, key string, r *regexp.Regexp) TestCheckFunc

TestMatchResourceAttr is a TestCheckFunc which checks that the value in state for the given name/key combination matches the given regex.

func TestModuleMatchResourceAttr added in v0.11.2

func TestModuleMatchResourceAttr(mp []string, name string, key string, r *regexp.Regexp) TestCheckFunc

TestModuleMatchResourceAttr - as per TestMatchResourceAttr but with support for non-root modules

type TestProvider added in v0.9.0

type TestProvider interface {
	TestReset() error

TestProvider can be implemented by any ResourceProvider to provide custom reset functionality at the start of an acceptance test. The helper/schema Provider implements this interface.

type TestStep

type TestStep struct {
	// ResourceName should be set to the name of the resource
	// that is being tested. Example: "". Various test
	// modes use this to auto-detect state information.
	// This is only required if the test mode settings below say it is
	// for the mode you're using.
	ResourceName string

	// PreConfig is called before the Config is applied to perform any per-step
	// setup that needs to happen. This is called regardless of "test mode"
	// below.
	PreConfig func()

	// Taint is a list of resource addresses to taint prior to the execution of
	// the step. Be sure to only include this at a step where the referenced
	// address will be present in state, as it will fail the test if the resource
	// is missing.
	// This option is ignored on ImportState tests, and currently only works for
	// resources in the root module path.
	Taint []string

	// Config a string of the configuration to give to Terraform. If this
	// is set, then the TestCase will execute this step with the same logic
	// as a `terraform apply`.
	Config string

	// Check is called after the Config is applied. Use this step to
	// make your own API calls to check the status of things, and to
	// inspect the format of the ResourceState itself.
	// If an error is returned, the test will fail. In this case, a
	// destroy plan will still be attempted.
	// If this is nil, no check is done on this step.
	Check TestCheckFunc

	// Destroy will create a destroy plan if set to true.
	Destroy bool

	// ExpectNonEmptyPlan can be set to true for specific types of tests that are
	// looking to verify that a diff occurs
	ExpectNonEmptyPlan bool

	// ExpectError allows the construction of test cases that we expect to fail
	// with an error. The specified regexp must match against the error for the
	// test to pass.
	ExpectError *regexp.Regexp

	// PlanOnly can be set to only run `plan` with this configuration, and not
	// actually apply it. This is useful for ensuring config changes result in
	// no-op plans
	PlanOnly bool

	// PreventDiskCleanup can be set to true for testing terraform modules which
	// require access to disk at runtime. Note that this will leave files in the
	// temp folder
	PreventDiskCleanup bool

	// PreventPostDestroyRefresh can be set to true for cases where data sources
	// are tested alongside real resources
	PreventPostDestroyRefresh bool

	// SkipFunc is called before applying config, but after PreConfig
	// This is useful for defining test steps with platform-dependent checks
	SkipFunc func() (bool, error)

	// ImportState, if true, will test the functionality of ImportState
	// by importing the resource with ResourceName (must be set) and the
	// ID of that resource.
	ImportState bool

	// ImportStateId is the ID to perform an ImportState operation with.
	// This is optional. If it isn't set, then the resource ID is automatically
	// determined by inspecting the state for ResourceName's ID.
	ImportStateId string

	// ImportStateIdPrefix is the prefix added in front of ImportStateId.
	// This can be useful in complex import cases, where more than one
	// attribute needs to be passed on as the Import ID. Mainly in cases
	// where the ID is not known, and a known prefix needs to be added to
	// the unset ImportStateId field.
	ImportStateIdPrefix string

	// ImportStateIdFunc is a function that can be used to dynamically generate
	// the ID for the ImportState tests. It is sent the state, which can be
	// checked to derive the attributes necessary and generate the string in the
	// desired format.
	ImportStateIdFunc ImportStateIdFunc

	// ImportStateCheck checks the results of ImportState. It should be
	// used to verify that the resulting value of ImportState has the
	// proper resources, IDs, and attributes.
	ImportStateCheck ImportStateCheckFunc

	// ImportStateVerify, if true, will also check that the state values
	// that are finally put into the state after import match for all the
	// IDs returned by the Import.  Note that this checks for strict equality
	// and does not respect DiffSuppressFunc or CustomizeDiff.
	// ImportStateVerifyIgnore is a list of prefixes of fields that should
	// not be verified to be equal. These can be set to ephemeral fields or
	// fields that can't be refreshed and don't matter.
	ImportStateVerify       bool
	ImportStateVerifyIgnore []string
	// contains filtered or unexported fields

TestStep is a single apply sequence of a test, done within the context of a state.

Multiple TestSteps can be sequenced in a Test to allow testing potentially complex update logic. In general, simply create/destroy tests will only need one step.

type TestT

type TestT interface {
	Error(args ...interface{})
	Fatal(args ...interface{})
	Skip(args ...interface{})
	Name() string

TestT is the interface used to handle the test lifecycle of a test.

Users should just use a *testing.T object, which implements this.

type TimeoutError added in v0.7.0

type TimeoutError struct {
	LastError     error
	LastState     string
	Timeout       time.Duration
	ExpectedState []string

TimeoutError is returned when WaitForState times out

func (*TimeoutError) Error added in v0.7.0

func (e *TimeoutError) Error() string

type UnexpectedStateError added in v0.7.0

type UnexpectedStateError struct {
	LastError     error
	State         string
	ExpectedState []string

UnexpectedStateError is returned when Refresh returns a state that's neither in Target nor Pending

func (*UnexpectedStateError) Error added in v0.7.0

func (e *UnexpectedStateError) Error() string

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL