container

package
v0.6.3-0...-140fefd Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: May 4, 2017 License: Apache-2.0 Imports: 48 Imported by: 0

Documentation

Index

Constants

View Source 
const (
	// DefaultStopTimeout is the timeout (in seconds) for the syscall signal used to stop a container.
	DefaultStopTimeout = 10
)

Variables

This section is empty.

Functions

func GetSandboxPortMapInfo 

func GetSandboxPortMapInfo(sb libnetwork.Sandbox) nat.PortMap

GetSandboxPortMapInfo retrieves the current port-mapping programmed for the given sandbox

func IsValidHealthString 

func IsValidHealthString(s string) bool

IsValidHealthString checks if the provided string is a valid container health status or not.

func IsValidStateString 

func IsValidStateString(s string) bool

IsValidStateString checks if the provided string is a valid container state or not.

func ReplaceOrAppendEnvValues 

func ReplaceOrAppendEnvValues(defaults, overrides []string) []string

ReplaceOrAppendEnvValues returns the defaults with the overrides either replaced by env key or appended to the list

Types

type CommonContainer 

type CommonContainer struct {
	StreamConfig *stream.Config
	// embed for Container to support states directly.
	*State          `json:"State"` // Needed for Engine API version <= 1.11
	Root            string         `json:"-"` // Path to the "home" of the container, including metadata.
	BaseFS          string         `json:"-"` // Path to the graphdriver mountpoint
	RWLayer         layer.RWLayer  `json:"-"`
	ID              string
	Created         time.Time
	Managed         bool
	Path            string
	Args            []string
	Config          *containertypes.Config
	ImageID         image.ID `json:"Image"`
	NetworkSettings *network.Settings
	LogPath         string
	Name            string
	Driver          string
	// MountLabel contains the options for the 'mount' command
	MountLabel             string
	ProcessLabel           string
	RestartCount           int
	HasBeenStartedBefore   bool
	HasBeenManuallyStopped bool // used for unless-stopped restart policy
	MountPoints            map[string]*volume.MountPoint
	HostConfig             *containertypes.HostConfig `json:"-"` // do not serialize the host config in the json, otherwise we'll make the container unportable
	ExecCommands           *exec.Store                `json:"-"`
	SecretStore            agentexec.SecretGetter     `json:"-"`
	SecretReferences       []*swarmtypes.SecretReference
	// logDriver for closing
	LogDriver logger.Logger  `json:"-"`
	LogCopier *logger.Copier `json:"-"`
	// contains filtered or unexported fields
}

CommonContainer holds the fields for a container which are applicable across all platforms supported by the daemon.

type Container 

type Container struct {
	CommonContainer

	// Fields below here are platform specific.
	AppArmorProfile string
	HostnamePath    string
	HostsPath       string
	ShmPath         string
	ResolvConfPath  string
	SeccompProfile  string
	NoNewPrivileges bool
}

Container holds the fields specific to unixen implementations. See CommonContainer for standard fields common to all containers.

func NewBaseContainer 

func NewBaseContainer(id, root string) *Container

NewBaseContainer creates a new container with its basic configuration.

func (*Container) AddMountPointWithVolume 

func (container *Container) AddMountPointWithVolume(destination string, vol volume.Volume, rw bool)

AddMountPointWithVolume adds a new mount point configured with a volume to the container.

func (*Container) BuildCreateEndpointOptions 

func (container *Container) BuildCreateEndpointOptions(n libnetwork.Network, epConfig *networktypes.EndpointSettings, sb libnetwork.Sandbox, daemonDNS []string) ([]libnetwork.EndpointOption, error)

BuildCreateEndpointOptions builds endpoint options from a given network.

func (*Container) BuildEndpointInfo 

func (container *Container) BuildEndpointInfo(n libnetwork.Network, ep libnetwork.Endpoint) error

BuildEndpointInfo sets endpoint-related fields on container.NetworkSettings based on the provided network and endpoint.

func (*Container) BuildHostnameFile 

func (container *Container) BuildHostnameFile() error

BuildHostnameFile writes the container's hostname file.

func (*Container) BuildJoinOptions 

func (container *Container) BuildJoinOptions(n libnetwork.Network) ([]libnetwork.EndpointOption, error)

BuildJoinOptions builds endpoint Join options from a given network.

func (*Container) CancelAttachContext 

func (container *Container) CancelAttachContext()

CancelAttachContext cancels attach context. All attach calls should detach after this call.

func (*Container) CheckpointDir 

func (container *Container) CheckpointDir() string

CheckpointDir returns the directory checkpoints are stored in

func (*Container) CloseStreams 

func (container *Container) CloseStreams() error

CloseStreams closes the container's stdio streams

func (*Container) ConfigPath 

func (container *Container) ConfigPath() (string, error)

ConfigPath returns the path to the container's JSON config

func (*Container) CopyImagePathContent 

func (container *Container) CopyImagePathContent(v volume.Volume, destination string) error

CopyImagePathContent copies files in destination to the volume.

func (*Container) CreateDaemonEnvironment 

func (container *Container) CreateDaemonEnvironment(tty bool, linkedEnv []string) []string

CreateDaemonEnvironment returns the list of all environment variables given the list of environment variables related to links. Sets PATH, HOSTNAME and if container.Config.Tty is set: TERM. The defaults set here do not override the values in container.Config.Env

func (*Container) DetachAndUnmount 

func (container *Container) DetachAndUnmount(volumeEventLog func(name, action string, attributes map[string]string)) error

DetachAndUnmount uses a detached mount on all mount destinations, then unmounts each volume normally. This is used from daemon/archive for `docker cp`

func (*Container) EnableServiceDiscoveryOnDefaultNetwork 

func (container *Container) EnableServiceDiscoveryOnDefaultNetwork() bool

EnableServiceDiscoveryOnDefaultNetwork Enable service discovery on default network

func (*Container) ExitOnNext 

func (container *Container) ExitOnNext()

ExitOnNext signals to the monitor that it should not restart the container after we send the kill signal.

func (*Container) FromDisk 

func (container *Container) FromDisk() error

FromDisk loads the container configuration stored in the host.

func (*Container) FullHostname 

func (container *Container) FullHostname() string

FullHostname returns hostname and optional domain appended to it.

func (*Container) GetEndpointInNetwork 

func (container *Container) GetEndpointInNetwork(n libnetwork.Network) (libnetwork.Endpoint, error)

GetEndpointInNetwork returns the container's endpoint to the provided network.

func (*Container) GetExecIDs 

func (container *Container) GetExecIDs() []string

GetExecIDs returns the list of exec commands running on the container.

func (*Container) GetMountLabel 

func (container *Container) GetMountLabel() string

GetMountLabel returns the mounting label for the container. This label is empty if the container is privileged.

func (*Container) GetProcessLabel 

func (container *Container) GetProcessLabel() string

GetProcessLabel returns the process label for the container.

func (*Container) GetResourcePath 

func (container *Container) GetResourcePath(path string) (string, error)

GetResourcePath evaluates `path` in the scope of the container's BaseFS, with proper path sanitisation. Symlinks are all scoped to the BaseFS of the container, as though the container's BaseFS was `/`.

The BaseFS of a container is the host-facing path which is bind-mounted as `/` inside the container. This method is essentially used to access a particular path inside the container as though you were a process in that container.

NOTE: The returned path is *only* safely scoped inside the container's BaseFS 

if no component of the returned path changes (such as a component
symlinking to a different path) between using this method and using the
path. See symlink.FollowSymlinkInScope for more details.

func (*Container) GetRootResourcePath 

func (container *Container) GetRootResourcePath(path string) (string, error)

GetRootResourcePath evaluates `path` in the scope of the container's root, with proper path sanitisation. Symlinks are all scoped to the root of the container, as though the container's root was `/`.

The root of a container is the host-facing configuration metadata directory. Only use this method to safely access the container's `container.json` or other metadata files. If in doubt, use container.GetResourcePath.

NOTE: The returned path is *only* safely scoped inside the container's root 

if no component of the returned path changes (such as a component
symlinking to a different path) between using this method and using the
path. See symlink.FollowSymlinkInScope for more details.

func (*Container) HasMountFor 

func (container *Container) HasMountFor(path string) bool

HasMountFor checks if path is a mountpoint

func (*Container) HostConfigPath 

func (container *Container) HostConfigPath() (string, error)

HostConfigPath returns the path to the container's JSON hostconfig

func (*Container) InitAttachContext 

func (container *Container) InitAttachContext() context.Context

InitAttachContext initializes or returns existing context for attach calls to track container liveness.

func (*Container) InitDNSHostConfig 

func (container *Container) InitDNSHostConfig()

InitDNSHostConfig ensures that the dns fields are never nil. New containers don't ever have those fields nil, but pre created containers can still have those nil values. The non-recommended host configuration in the start api can make these fields nil again, this corrects that issue until we remove that behavior for good. See https://github.com/docker/docker/pull/17779 for a more detailed explanation on why we don't want that.

func (*Container) InitializeStdio 

func (container *Container) InitializeStdio(iop libcontainerd.IOPipe) error

InitializeStdio is called by libcontainerd to connect the stdio.

func (*Container) IpcMounts 

func (container *Container) IpcMounts() []Mount

IpcMounts returns the list of IPC mounts

func (*Container) IsDestinationMounted 

func (container *Container) IsDestinationMounted(destination string) bool

IsDestinationMounted checks whether a path is mounted on the container or not.

func (*Container) NetworkMounts 

func (container *Container) NetworkMounts() []Mount

NetworkMounts returns the list of network mounts.

func (*Container) Reset 

func (container *Container) Reset(lock bool)

Reset puts a container into a state where it can be restarted again.

func (*Container) ResetRestartManager 

func (container *Container) ResetRestartManager(resetCount bool)

ResetRestartManager initializes new restartmanager based on container config

func (*Container) ResolvePath 

func (container *Container) ResolvePath(path string) (resolvedPath, absPath string, err error)

ResolvePath resolves the given path in the container to a resource on the host. Returns a resolved path (absolute path to the resource on the host), the absolute path to the resource relative to the container's rootfs, and an error if the path points to outside the container's rootfs.

func (*Container) RestartManager 

func (container *Container) RestartManager() restartmanager.RestartManager

RestartManager returns the current restartmanager instance connected to container.

func (*Container) SecretMount 

func (container *Container) SecretMount() *Mount

SecretMount returns the mount for the secret path

func (*Container) SecretMountPath 

func (container *Container) SecretMountPath() string

SecretMountPath returns the path of the secret mount for the container

func (*Container) SetupWorkingDirectory 

func (container *Container) SetupWorkingDirectory(rootUID, rootGID int) error

SetupWorkingDirectory sets up the container's working directory as set in container.Config.WorkingDir

func (*Container) ShmResourcePath 

func (container *Container) ShmResourcePath() (string, error)

ShmResourcePath returns path to shm

func (*Container) ShouldRestart 

func (container *Container) ShouldRestart() bool

ShouldRestart decides whether the daemon should restart the container or not. This is based on the container's restart policy.

func (*Container) StartLogger 

func (container *Container) StartLogger() (logger.Logger, error)

StartLogger starts a new logger driver for the container.

func (*Container) StatPath 

func (container *Container) StatPath(resolvedPath, absPath string) (stat *types.ContainerPathStat, err error)

StatPath is the unexported version of StatPath. Locks and mounts should be acquired before calling this method and the given path should be fully resolved to a path on the host corresponding to the given absolute path inside the container.

func (*Container) StderrPipe 

func (container *Container) StderrPipe() io.ReadCloser

StderrPipe gets the stderr stream of the container

func (*Container) StdinPipe 

func (container *Container) StdinPipe() io.WriteCloser

StdinPipe gets the stdin stream of the container

func (*Container) StdoutPipe 

func (container *Container) StdoutPipe() io.ReadCloser

StdoutPipe gets the stdout stream of the container

func (*Container) StopSignal 

func (container *Container) StopSignal() int

StopSignal returns the signal used to stop the container.

func (*Container) StopTimeout 

func (container *Container) StopTimeout() int

StopTimeout returns the timeout (in seconds) used to stop the container.

func (*Container) TmpfsMounts 

func (container *Container) TmpfsMounts() ([]Mount, error)

TmpfsMounts returns the list of tmpfs mounts

func (*Container) ToDisk 

func (container *Container) ToDisk() error

ToDisk saves the container configuration on disk.

func (*Container) ToDiskLocking 

func (container *Container) ToDiskLocking() error

ToDiskLocking saves the container configuration on disk in a thread safe way.

func (*Container) TrySetNetworkMount 

func (container *Container) TrySetNetworkMount(destination string, path string) bool

TrySetNetworkMount attempts to set the network mounts given a provided destination and the path to use for it; return true if the given destination was a network mount file

func (*Container) UnmountIpcMounts 

func (container *Container) UnmountIpcMounts(unmount func(pth string) error)

UnmountIpcMounts uses the provided unmount function to unmount shm and mqueue if they were mounted

func (*Container) UnmountSecrets 

func (container *Container) UnmountSecrets() error

UnmountSecrets unmounts the local tmpfs for secrets

func (*Container) UnmountVolumes 

func (container *Container) UnmountVolumes(volumeEventLog func(name, action string, attributes map[string]string)) error

UnmountVolumes unmounts all volumes

func (*Container) UpdateContainer 

func (container *Container) UpdateContainer(hostConfig *containertypes.HostConfig) error

UpdateContainer updates configuration of a container.

func (*Container) UpdateJoinInfo 

func (container *Container) UpdateJoinInfo(n libnetwork.Network, ep libnetwork.Endpoint) error

UpdateJoinInfo updates network settings when container joins network n with endpoint ep.

func (*Container) UpdateMonitor 

func (container *Container) UpdateMonitor(restartPolicy containertypes.RestartPolicy)

UpdateMonitor updates monitor configure for running container

func (*Container) UpdateSandboxNetworkSettings 

func (container *Container) UpdateSandboxNetworkSettings(sb libnetwork.Sandbox) error

UpdateSandboxNetworkSettings updates the sandbox ID and Key.

func (*Container) WriteHostConfig 

func (container *Container) WriteHostConfig() error

WriteHostConfig saves the host configuration on disk for the container.

type ExitStatus 

type ExitStatus struct {
	// The exit code with which the container exited.
	ExitCode int

	// Whether the container encountered an OOM.
	OOMKilled bool
}

ExitStatus provides exit reasons for a container.

type Health 

type Health struct {
	types.Health
	// contains filtered or unexported fields
}

Health holds the current container health-check state

func (*Health) CloseMonitorChannel 

func (s *Health) CloseMonitorChannel()

CloseMonitorChannel closes any existing monitor channel.

func (*Health) OpenMonitorChannel 

func (s *Health) OpenMonitorChannel() chan struct{}

OpenMonitorChannel creates and returns a new monitor channel. If there already is one, it returns nil.

func (*Health) String 

func (s *Health) String() string

String returns a human-readable description of the health-check state

type History 

type History []*Container

History is a convenience type for storing a list of containers, sorted by creation date in descendant order.

func (*History) Len 

func (history *History) Len() int

Len returns the number of containers in the history.

func (*History) Less 

func (history *History) Less(i, j int) bool

Less compares two containers and returns true if the second one was created before the first one.

func (*History) Swap 

func (history *History) Swap(i, j int)

Swap switches containers i and j positions in the history.

type Mount 

type Mount struct {
	Source      string `json:"source"`
	Destination string `json:"destination"`
	Writable    bool   `json:"writable"`
	Data        string `json:"data"`
	Propagation string `json:"mountpropagation"`
}

Mount contains information for a mount operation.

type State 

type State struct {
	sync.Mutex
	// FIXME: Why do we have both paused and running if a
	// container cannot be paused and running at the same time?
	Running           bool
	Paused            bool
	Restarting        bool
	OOMKilled         bool
	RemovalInProgress bool // Not need for this to be persistent on disk.
	Dead              bool
	Pid               int
	ExitCodeValue     int    `json:"ExitCode"`
	ErrorMsg          string `json:"Error"` // contains last known error when starting the container
	StartedAt         time.Time
	FinishedAt        time.Time

	Health *Health
	// contains filtered or unexported fields
}

State holds the current container state, and has methods to get and set the state. Container has an embed, which allows all of the functions defined against State to run against Container.

func NewState 

func NewState() *State

NewState creates a default state object with a fresh channel for state changes.

func (*State) Error 

func (s *State) Error() string

Error returns current error for the state.

func (*State) ExitCode 

func (s *State) ExitCode() int

ExitCode returns current exitcode for the state. Take lock before if state may be shared.

func (*State) GetPID 

func (s *State) GetPID() int

GetPID holds the process id of a container.

func (*State) HealthString 

func (s *State) HealthString() string

HealthString returns a single string to describe health status.

func (*State) IsPaused 

func (s *State) IsPaused() bool

IsPaused returns whether the container is paused or not.

func (*State) IsRestarting 

func (s *State) IsRestarting() bool

IsRestarting returns whether the container is restarting or not.

func (*State) IsRunning 

func (s *State) IsRunning() bool

IsRunning returns whether the running flag is set. Used by Container to check whether a container is running.

func (*State) ResetRemovalInProgress 

func (s *State) ResetRemovalInProgress()

ResetRemovalInProgress makes the RemovalInProgress state to false.

func (*State) SetDead 

func (s *State) SetDead()

SetDead sets the container state to "dead"

func (*State) SetError 

func (s *State) SetError(err error)

SetError sets the container's error state. This is useful when we want to know the error that occurred when container transits to another state when inspecting it

func (*State) SetExitCode 

func (s *State) SetExitCode(ec int)

SetExitCode sets current exitcode for the state. Take lock before if state may be shared.

func (*State) SetRemovalInProgress 

func (s *State) SetRemovalInProgress() bool

SetRemovalInProgress sets the container state as being removed. It returns true if the container was already in that state.

func (*State) SetRestarting 

func (s *State) SetRestarting(exitStatus *ExitStatus)

SetRestarting sets the container state to "restarting" without locking. It also sets the container PID to 0.

func (*State) SetRunning 

func (s *State) SetRunning(pid int, initial bool)

SetRunning sets the state of the container to "running".

func (*State) SetStopped 

func (s *State) SetStopped(exitStatus *ExitStatus)

SetStopped sets the container state to "stopped" without locking.

func (*State) StateString 

func (s *State) StateString() string

StateString returns a single string to describe state

func (*State) String 

func (s *State) String() string

String returns a human-readable description of the state

func (*State) WaitStop 

func (s *State) WaitStop(timeout time.Duration) (int, error)

WaitStop waits until state is stopped. If state already stopped it returns immediately. If you want wait forever you must supply negative timeout. Returns exit code, that was passed to SetStopped

func (*State) WaitWithContext 

func (s *State) WaitWithContext(ctx context.Context) error

WaitWithContext waits for the container to stop. Optional context can be passed for canceling the request.

type StateStatus 

type StateStatus struct {
	// contains filtered or unexported fields
}

StateStatus is used to return an error type implementing both exec.ExitCode and error. This type is needed as State include a sync.Mutex field which make copying it unsafe.

func (*StateStatus) Error 

func (ss *StateStatus) Error() string

Error returns current error for the state.

func (*StateStatus) ExitCode 

func (ss *StateStatus) ExitCode() int

ExitCode returns current exitcode for the state.

type Store 

type Store interface {
	// Add appends a new container to the store.
	Add(string, *Container)
	// Get returns a container from the store by the identifier it was stored with.
	Get(string) *Container
	// Delete removes a container from the store by the identifier it was stored with.
	Delete(string)
	// List returns a list of containers from the store.
	List() []*Container
	// Size returns the number of containers in the store.
	Size() int
	// First returns the first container found in the store by a given filter.
	First(StoreFilter) *Container
	// ApplyAll calls the reducer function with every container in the store.
	ApplyAll(StoreReducer)
}

Store defines an interface that any container store must implement.

func NewMemoryStore 

func NewMemoryStore() Store

NewMemoryStore initializes a new memory store.

type StoreFilter 

type StoreFilter func(*Container) bool

StoreFilter defines a function to filter container in the store.

type StoreReducer 

type StoreReducer func(*Container)

StoreReducer defines a function to manipulate containers in the store

Source Files

View all Source files

Directories

Path Synopsis

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.